Add one more trace message to the torture_rcu_high test
It is interesting that in the very rare cases, where this
test failure has been observed so far, the rcu torture value
went always backwards to 0. This could be either due to
ossl_rcu_deref(&writer_ptr) returning NULL, or the initial
value of "new = CRYPTO_zalloc(sizeof(uint64_t), NULL, 0)"
still visible despite ossl_rcu_assign_ptr(&writer_ptr, &new)
immediatley after the "*new = global_ctr++" statement.
Add one additional trace message to find out what exactly
happens here, when it happens again.
Additionally, we do no longer initialize the new value to
zero but something else, so it can also be detected.
Related to #27267
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28487)
doc/man3/RAND_load_file.pod: RAND_load_file on non-regular files with bytes=-1
Mention that RAND_load_file attempts to read only RAND_DRBG_STRENGTH
bytes on non-regular files if the number of bytes to be read
is not specified explicitly.
Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28379)
crypto/rand/randfile.c: avoid signed integer overflow in RAND_load_file
If a file supplied to RAND_load_file is too big (more than INT_MAX bytes),
it is possible to trigger a signer integer overflow during ret calculation.
Avoid it by returning early when we are about to hit it on the next
iteration.
Reported-by: Liu-Ermeng <liuermeng2@huawei.com>
Resolves: https://github.com/openssl/openssl/issues/28375 Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28379)
Enji Cooper [Fri, 5 Sep 2025 03:22:00 +0000 (20:22 -0700)]
Make the Unix build process more repeatable
Before this change all manpages would contain the date when pod2man was
run. This resulted in outputs that differed between builds--or
potentially across a single build if the host clock "ticked" to the next
day when the build was being run.
This commit modifies the manpage generation process as follows:
- The date all manpages were generated will be normalized to a single
date.
- The release date specified in `VERSION.dat` is used instead of the
date/time when `pod2man` was executed OR--in the event a date isn't
specified in `VERSION.dat`--the time when the Makefiles were last
regenerated.
Embedding a consistent date into the generated manpages helps ensure that
the build process as a whole is more repeatable and helps ensure that
release versions of OpenSSL create artifacts consistent with the date
that the official release was cut.
Co-authored-by: Richard Levitte <levitte@openssl.org> Signed-off-by: Enji Cooper <yaneurabeya@gmail.com> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28449)
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28422)
David Benjamin [Sun, 31 Aug 2025 22:09:52 +0000 (18:09 -0400)]
Add a helper function to delete the extension list
Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28398)
Extensions ::= SEQUENCE SIZE (1..MAX) OF Extension
This means that a present but empty extensions list is actually invalid.
Rather, if you have no extensions to encode, you are meant to omit the
list altogether. Fix the delete_ext functions to handle this correctly.
This would mostly be moot, as an application adding extensions only to
delete them all would be unusual. However, #13658 implemented a slightly
roundabout design where, to omit SKID/AKID, the library first puts them
in and then the command-line tool detects some placeholder values and
deletes the extension again.
Fixes #28397
Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28398)
Viperinius [Sun, 31 Aug 2025 16:09:11 +0000 (16:09 +0000)]
Fix typo in BN_generate_prime docs
CLA: trivial
Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28395)
Norbert Pocs [Wed, 27 Aug 2025 13:45:45 +0000 (15:45 +0200)]
docs: Be case specific with links to man headers
Signed-off-by: Norbert Pocs <norbertp@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28356)
The last (and only?) user has been removed in commit eca471391378 "APPS:
Drop interactive mode in the 'openssl' program".
Complements: eca471391378 "APPS: Drop interactive mode in the 'openssl' program" Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28441)
There are some code paths where resp is used without a previous check
for being non-NULL (specifically, OCSP_response_create() can return
NULL, and do_responder() can return -1, that would also lead to resp
being NULL). Avoid hitting NULL dereferences by wrapping the code that
uses resp in "if (resp != NULL)".
Resolves: https://scan5.scan.coverity.com/#/project-view/65248/10222?selectedIssue=1665155
References: https://github.com/openssl/project/issues/1362 Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28406)
crypto/x509/t_req.c: avoid exts leaking on error paths
If an error occurred and jump to the "err" label is performed after
exts has been allocated, it can leak. Avoid that by adding
sk_X509_EXTENSION_pop_free() on the error path and setting exts to NULL
after sk_X509_EXTENSION_pop_free() in the normal handling.
Fixes: ae880ae6719e "Fix error handling in X509_REQ_print_ex" Fixes: 87c49f622e7f "Support for parsing of certificate extensions in PKCS#10 requests: these are"
Resolves: https://scan5.scan.coverity.com/#/project-view/65248/10222?selectedIssue=1665161
References: https://github.com/openssl/project/issues/1362 Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28406)
test/radix/quic_bindings.c: move locking after child_script_info assignment
Coverity complains that some child_script_info field accesses are guarded
by the mutexes, while others are not; placate it by performing the assignment
before taking the lock.
Resolves: https://scan5.scan.coverity.com/#/project-view/65248/10222?selectedIssue=1665151
References: https://github.com/openssl/project/issues/1362 Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28406)
doc/man1/openssl-enc.pod.in: document 'k' handling for -bufsize
Apparently, '-bufsize' option parser can handle the 'k' suffix
(and treat is as the value being provided in the multiples of 1024).
Document that.
Complements: d02b48c63a58 "Import of old SSLeay release: SSLeay 0.8.1b" Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28406)
apps/enc.c: avoid signed integer overflow on bufsize assignment
The calculated option value, while being long-typed, is not checked
for fitting into int-sized bufsize. Avoid overflow by throwing error
if it is bigger than INT_MAX and document that behaviour.
Fixes: 7e1b7485706c "Big apps cleanup (option-parsing, etc)"
Resolves: https://scan5.scan.coverity.com/#/project-view/65248/10222?selectedIssue=1665149
References: https://github.com/openssl/project/issues/1362 Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28406)
Pauli [Thu, 4 Sep 2025 21:24:19 +0000 (07:24 +1000)]
slh-dsa: omit test of import PCT
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/28447)
Pauli [Thu, 4 Sep 2025 21:23:28 +0000 (07:23 +1000)]
import pct: remove import PCTs for most algorithms
This coveres DH, EC, RSA and SLH-DSA.
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/28447)
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28437)
Signed-off-by: Norbert Pocs <norbertp@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28409)
X509_VERIFY_PARAM_get0(): add check to defend on out-of-bound table access
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28370)
slontis [Fri, 29 Aug 2025 04:11:59 +0000 (14:11 +1000)]
FIPS: Don't allow SHA512-224 and SHA512-256 for ECDSA/DSA signatures
These algorithms do not have OIDS (Note that RSA does have OIDS),
and are not valid values for FIPS.
Note that this was only possible if the "ECDSA" algorithm is fetched.
Note that "ECDSA-SHA512-256" and "ECDSA-SHA512-224" are not currently
fetchable.
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28377)
Pauli [Sun, 31 Aug 2025 07:21:42 +0000 (17:21 +1000)]
slh-dsa: enter FIPS error state if pairwise test fails
Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28394)
Pauli [Thu, 14 Aug 2025 04:57:19 +0000 (14:57 +1000)]
slh-dsa: add a PCT for key import when in FIPS mode
Fixes #28182
Co-Authored-By: slontis <shane.lontis@oracle.com> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28276)
Jakub Jelen [Mon, 25 Aug 2025 08:04:41 +0000 (10:04 +0200)]
doc: Fix function name in example code
CLA: trivial Signed-off-by: Jakub Jelen <jjelen@redhat.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28334)
Holger Dengler [Wed, 20 Aug 2025 15:55:43 +0000 (17:55 +0200)]
aes-s390x.pl: Initialize reserved and unused memory
The reserved bytes in the parameter block (bytes 0-11) for the KMA
instruction should be set to zero to be compatible in case of future
architecture changes.
While at it, also the following unused parts of the parameter block
(bytes 48-63) are also cleared to avoid false positives with various
memory checkers like valgrind.
As it makes - performance wise - no difference to process 12, 48 or 64
bytes with one XC call, but two XC calls are slower than one call, the
first 64 bytes of the parameter block will be cleared with a single XC
call. This will also initialize the counter in the parameter block
(bytes 12-15), although it is not strictly necessary.
Co-developed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28315)
doc/man3/SSL_poll.pod: mention SSL_POLL_EVENT_{EL,IC} in SYNOPSIS
While the constants are present since the initial commit 2a5ee0a08d2c "QUIC:
Add polling API", they weren't initially documented in c9b0df2250e2 "QUIC:
Add manpage for SSL_poll" (probably due to absence of the QUIC server
mode support at the time), and mentioned for the first time in b20f55702100
"QUIC: Update SSL_poll documentation", but without the accompanying update
of the SYNOPSIS section. Rescind the omission by updating it as well.
Complements: b20f55702100 "QUIC: Update SSL_poll documentation" Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28303)
Nachel72 [Sun, 17 Aug 2025 06:08:38 +0000 (14:08 +0800)]
Fix: Add free to avoid memory leak.
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28289)
Nikola Pajkovsky [Fri, 15 Aug 2025 12:02:44 +0000 (14:02 +0200)]
dh: add FIPS 140-3 PCT on key generation
According to FIPS 140-3 IG 10.3.A Additonal Comment 1, a PCT shall be
performed.
Signed-off-by: Nikola Pajkovsky <nikolap@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/28280)
ritoban23 [Wed, 13 Aug 2025 20:19:17 +0000 (01:49 +0530)]
Fix null pointer check in pkey_dh_derive to ensure both keys are set
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/28259)
Nachel72 [Wed, 13 Aug 2025 15:15:05 +0000 (23:15 +0800)]
Fix: Check for wrong object. The converted sc should be checked instead of the original s
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/28248)
Niels Dossche [Thu, 21 Aug 2025 11:24:01 +0000 (13:24 +0200)]
Fix reallocation failure condition in qtx_resize_txe()
Returning the same pointer does not mean that the reallocation failed,
it would also prevent updating alloc_len down below.
This is similar code and a similar change to 043a41ddee.
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28317)
Niels Dossche [Tue, 19 Aug 2025 20:56:38 +0000 (22:56 +0200)]
Make error checks on RSA_public_decrypt() consistent
Some are only checking for a value < 0, some for <= 0, some for == 0, etc.
The documentation tells us that -1 is returned on error, so at least the
== 0 ones are wrong. In general, the return values are checked
inconsistently. This patch makes the return value checks consistent to
the form that seems to occur most.
Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28306)
Matt Caswell [Thu, 7 Aug 2025 16:50:17 +0000 (17:50 +0100)]
Don't keep the store open in by_store_ctrl_ex
Previously #27529 made a change to `by_store_ctrl_ex` in order to open
the OSSL_STORE early. The reason given in that PR is:
"This way, we can call OSSL_STORE_open_ex() in by_store_ctrl_ex(), and
get to see possible errors when the URI is loaded"
That PR then kept the store open until cache_objects is called and then
reused it. Unfortunately by the time cache_objects() is called we could be
in a multi-threaded scenario where the X509_STORE is being shared by
multiple threads. We then get a race condition where multiple threads are
all using (and ultimately closing) the same `OSSL_STORE_CTX`.
The purpose of keeping the `OSSL_STORE` object between by_store_ctrl_ex()
and `cache_objects` is presumably an optimisation to avoid having to open
the store twice. But this does not work because of the above issue.
We just take the hit and open it again.
Fixes #28171
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28198)
fips: upgrade self-test KATs to reduce SHA-1/SHA-224 usage
FIPS 140-3 IG states that SHA-224 needs standalone KAT, if it is
implemented without SHA-256. As OpenSSL implements SHA-256, upgrade
existing higher level KAT from SHA-224 to SHA-256 without adding
SHA-224 digest KAT.
Upgrade KATs that use SHA-1 to SHA-256, and add explicit SHA-1 KAT.
SHA-1 and SHA-224 are promised to be deprecated by 2030, as per draft
[NIST SP 800-131A Rev. 3](https://csrc.nist.gov/pubs/sp/800/131/a/r3/ipd).
With upgrades to these KATs it makes it easier to build a modules with
SHA-1 and SHA-224 marked as unapproved services, or removed
altogether.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28307)
Matt Caswell [Fri, 15 Aug 2025 16:12:11 +0000 (17:12 +0100)]
Test setting a client to send a key share not allowed in TLSv1.3
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28283)
Matt Caswell [Fri, 15 Aug 2025 15:43:49 +0000 (16:43 +0100)]
Fail immediately if we have no key shares to send
If we are configured in such a way that we have no valid key shares to
send in the ClientHello we should immediately abort the connection.
Fixes #28281
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Hugo Landau <hlandau@devever.net> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28283)
BIO_dgram: Fix BIO_CTRL_DGRAM_QUERY_MTU for IPv4-mapped IPv6 addresses
Ensure the correct IP header size is subtracted by reusing
dgram_get_mtu_overhead(), which handles address families properly.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Frederik Wedel-Heinen <fwh.openssl@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28088)
Neil Horman [Wed, 13 Aug 2025 14:12:38 +0000 (10:12 -0400)]
Add CRYPTO_FREE_REF to ossl_quic_free_token_store
ossl_quic_free_token_store doesn't call CRYPTO_FREE_REF on the
hdl->reference object, which could lead to memory leaks on platforms
that don't support atomics (where the call to CRYPTO_NEW_REF allocates a
mutex as part of its function. It wasn't caught before because all the
platforms we do ci on support threads.
Fixes #28241
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28247)
Bernd Edlinger [Sun, 10 Aug 2025 16:50:37 +0000 (18:50 +0200)]
Add test coverage for PKCS7_TEXT mode
This was inspired by the following commit 9882d389df71 ("crypto/pkcs7/pk7_smime.c: Add BIO_free() to avoid memory leak")
which discovered a bug in PKCS7_verify(..., PKCS7_TEXT).
While there is some test coverage for PKCS_verify by
./test/pkcs7_test.c, there is no test coverage whatsoever
of the PKCS7_TEXT flag for PKCS7_sign, PKCS7_encrypt and
PKCS7_decrypt.
So this adds some test coverage for those functions as well.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28223)
Bernd Edlinger [Sat, 21 Jun 2025 10:53:56 +0000 (12:53 +0200)]
DH private key size was one bit too large
In the case when no q parameter was given,
the function generate_key in dh_key.c did create
one bit too much, so the priv_key value was exceeding
the DH group size q = (p-1)/2.
When the length is used in this case the limit is also
one bit too high, but for backward compatibility this
limit was left as is, instead we have to silently reduce
the value by one.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/27870)
Remove OSSL_CRYPTO_ALLOC attribute from CRYPTO_*dup routines
The __attribute__((malloc)) is for functions that return new memory,
and "the memory [returned by the function] has undefined content", which
is a property that doesn't hold for the *dup functions (the same reason
it doesn't apply to realloc).
Fixes: e1035957eba1 "OSSL_CRYPTO_ALLOC attribute introduction proposal." Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/28220)
Andrew Dinh [Mon, 11 Aug 2025 10:07:15 +0000 (17:07 +0700)]
Add NULL check
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28221)
Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28207)
doc/man3/SSL_CTX_set_domain_flags: fix version in HISTORY section
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28128)
test/sanitytest.c: fix setitimer usage in timer disarmament
It is incorrect to call setitimer(which, NULL, NULL) to disarm a timer,
Linux just gives a pass on that; properly provide a zeroed-out
structure instead.
Fixes: 760929f6ba18 "crypto/sleep.c: avoid returning early due to signal" Reported-by: Neil Horman <nhorman@openssl.org> Signed-off-by: Eugene Syromiatnikov <esyr@openssl.org> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28215)
Fix memory leak on EVP_CIPHER_param_to_asn1 failure
When EVP_CIPHER_param_to_asn1() fails, xalg->parameter was not freed,
leading to a memory leak. This patch adds proper cleanup for that case.
CLA: trivial
Signed-off-by: 77tiann <27392025k@gmail.com> Reviewed-by: Paul Dale <ppzgs1@gmail.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28131)
Fix RSA key size validation in EVP_PKEY_RSA_keygen demo
The validation was checking the default 'bits' value (4096) instead of
the parsed 'bits_i' from the command line arguments, allowing invalid
key sizes to bypass the 512-bit minimum.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/28139)
crypto/sleep.c: avoid returning early due to signal
On POSIX systems, sleep/usleep/nanosleep may return early due to arrival
of a signal, and OSSL_sleep does not report that, so it is assumed that
it cannot return early. Fix that by introducing a loop that checks
the remaining time and sleep some more if the time has not passed;
that also solves the issue of limited sleeping time on some systems.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28196)
Neil Horman [Mon, 4 Aug 2025 22:29:52 +0000 (18:29 -0400)]
Ensure that the largest_pn values are migrated to our channel qrx
Recently, our overnight QUIC interop runs began failing in CI when an
openssl server was tested against an ngtcp2 client:
https://github.com/openssl/openssl/actions/runs/16739736813
The underlying cause bears some explination for historical purposes
The problem began happening with a recent update to ngtcp2 in which
ngtcp2 updated its wolfssl tls backend to support ML-KEM, which caused
ngtcp to emit a client hello message that offered several groups
(including X25519MLKEM768) but only provided a keyshare for x25519.
This in turn triggered the openssl server to respond with a hello retry
request (HRR), requesting an ML-KEM keyshare instead, which ngtcp2
obliged. However all subsequent frames from the client were discarded by
the server, due to failing packet body decryption.
The problem was tracked down to a mismatch in the initial vectors used
by the client and server, leading to an AEAD tag mismatch.
Packet protection keys generate their IV's in QUIC by xoring the packet
number of the received frame with the base IV as derived via HKDF in the
tls layer.
The underlying problem was that openssl hit a very odd corner case with
how we compute the packet number of the received frame. To save space,
QUIC encodes packet numbers using a variable length integer, and only
sends the changed bits in the packet number. This requires that the
receiver (openssl) store the largest received pn of the connection,
which we nominally do.
However, in default_port_packet_handler (where QUIC frames are processed
prior to having an established channel allocated) we use a temporary qrx
to validate the packet protection of those frames. This temporary qrx
may be incorporated into the channel in some cases, but is not in the
case of a valid frame that generates an HRR at the TLS layer. In this
case, the channel allocates its own qrx independently. When this
occurs, the largest_pn value of the temporary qrx is lost, and
subsequent frames are unable to be received, as the newly allocated qrx
belives that the larges_pn for a given pn_space is 0, rather than the
value received in the initial frame (which was a complete 32 bit value,
rather than just the changed lower 8 bits). As a result the IV
construction produced the wrong value, and the decrypt failed on those
subsequent frames.
Up to this point, that wasn't even a problem, as most quic
implementations start their packet numbering at 0, so the next packet
could still have its packet number computed properly. The combination
of ngtcp using large random values for initial packet numbers, along
with the HRR triggering a separate qrx creation on a channel led to the
discovery of this discrepancy.
The fix seems pretty straightforward. When we detect in
port_default_packet_handler, that we have a separate qrx in the new
channel, we migrate processed packets from the temporary qrx to the
canonical channel qrx. In addition to doing that, we also need to
migrate the largest_pn array from the temporary qrx to the channel_qrx
so that subsequent frame reception is guaranteed to compute the received
frame packet number properly, and as such, compute the proper IV for
packet protection decryption.
Fixes openssl/project#1296
Reviewed-by: Saša Nedvědický <sashan@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28189)
Nikolas Gauder [Mon, 4 Aug 2025 21:47:23 +0000 (23:47 +0200)]
ssl/quic/quic_channel.c: Fix endianness of supported versions from received version negotiation packets
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28169)
Nikolas Gauder [Mon, 4 Aug 2025 19:12:35 +0000 (21:12 +0200)]
ssl/quic/quic_port.c: Fix endianness of supported versions in sent version negotiation packets
Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28169)
Michael Baentsch [Mon, 28 Jul 2025 04:52:49 +0000 (06:52 +0200)]
fuzz/dtlsserver.c: Remove incorrect ifdef guard
Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28102)
Only report generic error if provider did not put an error on the error queue
Commit 72351b0d18078170af270418b2d5e9fc579cb1af added code to unconditionally
put a generic error onto the error stack, if key generation, encryption,
decryption, sign, or verify fails to ensure that there is an error entry
on the error queue, even if the provider did not itself put a specific error
onto the queue.
However, this can hide error details if an application just looks at the very
last error entry and checks for specific errors. Now, the generic error is
always the last entry, and the application won't find the expected error
entry, although it would be there as second last entry. This can lead to
different application behavior in error situations than before this change.
To fix this, only add the generic error entry if the provider did not itself
add an error entry onto the queue. That way, there always is an error on the
error queue in case of a failure, but no behavior change in case the provider
emitted the error entry itself.
Closes: https://github.com/openssl/openssl/issues/27992 Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28073)
Make ERR_count_to_mark() available to providers via 'in' dispatch array
Functions like ERR_set_mark(), ERR_clear_last_mark(), and ERR_pop_to_mark()
are already passed to the a provider via the 'in' dispatch array of the
provider initialization function (although the documentation did not
mention them).
Also pass ERR_count_to_mark() to the provider the same way, and update
the documentation to mention all four functions.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28073)
Nikola Pajkovsky [Thu, 17 Jul 2025 10:45:49 +0000 (12:45 +0200)]
Pairwise check for DH keys import as part of FIPS
For DH key import, it appears the PCT and assurances are implemented in
the source but are not be performed by default.
Signed-off-by: Nikola Pajkovsky <nikolap@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Viktor Dukhovni <viktor@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28058)
Nikola Pajkovsky [Wed, 16 Jul 2025 12:37:58 +0000 (14:37 +0200)]
Update dh_pub to be pairwise consistent with dh_priv
Signed-off-by: Nikola Pajkovsky <nikolap@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Viktor Dukhovni <viktor@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28058)
Co-authored-by: Andrew Dinh <andrewd@openssl.org> Reviewed-by: Neil Horman <nhorman@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/28023)
projects / thirdparty / openssl.git / log
