clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.
The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.
Let's remove it again in hope that nobody adds it back.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Alexander Stein [Wed, 3 Nov 2021 12:39:47 +0000 (13:39 +0100)]
clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
Only imx8m_clk_hw_composite_core needs to set this flag.
Fixes: a60fe746df94 ("clk: imx: Rework all imx_clk_hw_composite wrappers") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211103123947.3222443-1-alexander.stein@ew.tq-group.com Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Joel Stanley [Wed, 22 Sep 2021 23:54:49 +0000 (09:24 +0930)]
clk/ast2600: Fix soc revision for AHB
Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.
Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.
Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Alexander Stein [Wed, 3 Nov 2021 12:24:41 +0000 (13:24 +0100)]
clk: composite: Fix 'switching' to same clock
During commit 6594988fd625 ("clk: composite: Use rate_ops.determine_rate
when also a mux is available") setting req->best_parent_hw got lost,
so best_parent_hw stays NULL during switch to the same parent. This
results in the (debug) message:
clk_calc_new_rates: lcdif_pixel not gated but wants to reparent
and the following rate change is dropped.
Fixes: 6594988fd625 ("clk: composite: Use rate_ops.determine_rate when also a mux is available") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211103122441.3208576-1-alexander.stein@ew.tq-group.com Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Heiko Stuebner [Wed, 27 Oct 2021 13:26:16 +0000 (15:26 +0200)]
clk: rockchip: drop module parts from rk3399 and rk3568 drivers
Both of these drivers were converted to real drivers and got a tristate
build option. But them being builtin_platform_drivers, they only ever
should be build-in - as the name suggests.
So adapt the Kconfig symbol and drop the MODULE_* parts from the drivers.
Reading recent discussions [0] [1], I realized this change introduces
a number of problems:
- only converting to module_platform_driver creates the issue
with the existing __init and __initdata attributes.
When the driver would've been built as a module, all the missing
clock-definitions (all are initdata) should've turned up as error
in testing suggesting that the change wasn't at all
- a clock driver is a very core component of soc bringup and making
this able to be built as a module solely for enabling the soc vendor
to add out of tree changes for Android implementations is not in our
interest and also everything except a ramdisk won't probe without a
clock controller.
This is especially true when the changes aren't really tested and
are merely added to move the mainline driver "out of the way".
owl-factor.c hasn't use any macro or function declared in linux/slab.h.
Thus, these files can be removed from owl-factor.c safely without
affecting the compilation of the ./drivers/clk module
Paul Cercueil [Fri, 1 Oct 2021 17:20:33 +0000 (18:20 +0100)]
clk: ingenic: Fix bugs with divided dividers
Two fixes in one:
- In the "impose hardware constraints" block, the "logical" divider
value (aka. not translated to the hardware) was clamped to fit in the
register area, but this totally ignored the fact that the divider
value can itself have a fixed divider.
- The code that made sure that the divider value returned by the
function was a multiple of its own fixed divider could result in a
wrong value being calculated, because it was rounded down instead of
rounded up.
Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided") Co-developed-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Tue, 2 Nov 2021 18:27:06 +0000 (11:27 -0700)]
Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next
* clk-composite-determine-fix:
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: composite: Also consider .determine_rate for rate + mux composites
* clk-allwinner:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
* clk-amlogic:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
* clk-samsung:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
Stephen Boyd [Tue, 2 Nov 2021 18:27:02 +0000 (11:27 -0700)]
Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-next
* clk-imx: (21 commits)
clk: imx: Make CLK_IMX8ULP select MXC_CLK
clk: imx: imx6ul: Fix csi clk gate register
clk: imx: imx6ul: Move csi_sel mux to correct base register
clk: imx: Fix the build break when clk-imx8ulp build as module
clk: imx: Add the pcc reset controller support on imx8ulp
clk: imx: Add clock driver for imx8ulp
clk: imx: Update the pfdv2 for 8ulp specific support
clk: imx: disable the pfd when set pfdv2 clock rate
clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
clk: imx: disable i.mx7ulp composite clock during initialization
clk: imx: Update the compsite driver to support imx8ulp
clk: imx: Update the pllv4 to support imx8ulp
dt-bindings: clock: Add imx8ulp clock support
clk: imx: Rework imx_clk_hw_pll14xx wrapper
clk: imx: Rework all imx_clk_hw_composite wrappers
clk: imx: Rework all clk_hw_register_divider wrappers
clk: imx: Rework all clk_hw_register_mux wrappers
clk: imx: Rework all clk_hw_register_gate2 wrappers
clk: imx: Rework all clk_hw_register_gate wrappers
clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
...
* clk-ux500:
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
* clk-debugfs:
clk: use clk_core_get_rate_recalc() in clk_rate_get()
Stephen Boyd [Tue, 2 Nov 2021 18:26:51 +0000 (11:26 -0700)]
Merge branches 'clk-leak', 'clk-rockchip', 'clk-renesas' and 'clk-at91' into clk-next
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to use
cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while
changing the frequency via DVFS
- Power management refinement with the use of save_context()/restore_context()
on each clock driver to specify their use in case of Backup mode only
* clk-leak:
clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths
* clk-rockchip:
clk: rockchip: use module_platform_driver_probe
clk: rockchip: rk3399: expose PCLK_COREDBG_{B,L}
clk: rockchip: rk3399: make CPU clocks critical
* clk-renesas:
clk: renesas: r8a779[56]x: Add MLP clocks
clk: renesas: r9a07g044: Add SDHI clock and reset entries
clk: renesas: rzg2l: Add SDHI clk mux support
clk: renesas: r8a779a0: Add RPC support
clk: renesas: cpg-lib: Move RPC clock registration to the library
clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller
clk: renesas: r8a779a0: Add Z0 and Z1 clock support
clk: renesas: r9a07g044: Add GbEthernet clock/reset
clk: renesas: rzg2l: Add support to handle coupled clocks
clk: renesas: r9a07g044: Add ethernet clock sources
clk: renesas: rzg2l: Add support to handle MUX clocks
clk: renesas: r8a779a0: Add TPU clock
clk: renesas: rzg2l: Fix clk status function
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
* clk-at91:
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: at91: check pmc node status before registering syscore ops
Stephen Boyd [Tue, 2 Nov 2021 18:26:33 +0000 (11:26 -0700)]
Merge branches 'clk-qcom', 'clk-mtk', 'clk-versatile' and 'clk-doc' into clk-next
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Make Mediatek clk drivers tristate
* clk-qcom: (44 commits)
clk: qcom: gdsc: enable optional power domain support
clk: qcom: videocc-sm8250: use runtime PM for the clock controller
clk: qcom: dispcc-sm8250: use runtime PM for the clock controller
dt-bindings: clock: qcom,videocc: add mmcx power domain
dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
clk: qcom: gcc-sc7280: Drop unused array
clk: qcom: camcc: Add camera clock controller driver for SC7280
dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280
clk: qcom: Add lpass clock controller driver for SC7280
dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280
clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180
clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc
clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc
clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents
clk: qcom: gcc-msm8994: Add proper msm8992 support
clk: qcom: gcc-msm8994: Add modem reset
clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE
clk: qcom: gcc-msm8994: Add missing clocks
clk: qcom: gcc-msm8994: Add missing NoC clocks
clk: qcom: gcc-msm8994: Fix up SPI QUP clocks
...
* clk-mtk: (28 commits)
clk: mediatek: Export clk_ops structures to modules
clk: mediatek: support COMMON_CLK_MT6779 module build
clk: mediatek: support COMMON_CLK_MEDIATEK module build
clk: composite: export clk_register_composite
clk: mediatek: Add MT8195 apusys clock support
clk: mediatek: Add MT8195 imp i2c wrapper clock support
clk: mediatek: Add MT8195 wpesys clock support
clk: mediatek: Add MT8195 vppsys1 clock support
clk: mediatek: Add MT8195 vppsys0 clock support
clk: mediatek: Add MT8195 vencsys clock support
clk: mediatek: Add MT8195 vdosys1 clock support
clk: mediatek: Add MT8195 vdosys0 clock support
clk: mediatek: Add MT8195 vdecsys clock support
clk: mediatek: Add MT8195 scp adsp clock support
clk: mediatek: Add MT8195 mfgcfg clock support
clk: mediatek: Add MT8195 ipesys clock support
clk: mediatek: Add MT8195 imgsys clock support
clk: mediatek: Add MT8195 ccusys clock support
clk: mediatek: Add MT8195 camsys clock support
clk: mediatek: Add MT8195 infrastructure clock support
...
* clk-versatile:
clk: versatile: hide clock drivers from non-ARM users
clk: versatile: Rename ICST to CLK_ICST
clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for register address
dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address
* clk-doc:
dt-bindings: clk: fixed-mmio-clock: Convert to YAML
Claudiu Beznea [Mon, 11 Oct 2021 11:27:19 +0000 (14:27 +0300)]
clk: use clk_core_get_rate_recalc() in clk_rate_get()
In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get()
will return the cached rate. Thus, use clk_core_get_rate_recalc() which
takes proper action when clock flags contains CLK_GET_RATE_NOCACHE.
Claudiu Beznea [Mon, 11 Oct 2021 11:27:17 +0000 (14:27 +0300)]
clk: at91: sama7g5: remove prescaler part of master clock
On SAMA7G5 the prescaler part of master clock has been implemented as a
changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
been discovered that in some conditions the PMC_SR.MCKRDY is not rising
but the rate it provides it's stable. The workaround is to add a timeout
when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
will be removed from Linux clock tree as all the frequencies for CPU could
be obtained from PLL and also there will be less overhead when changing
frequency via DVFS.
Claudiu Beznea [Mon, 11 Oct 2021 11:27:16 +0000 (14:27 +0300)]
clk: at91: clk-master: add notifier for divider
SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same
parent with cpuck as seen in the following clock tree:
+----------> cpuck
|
FRAC PLL ---> DIV PLL -+-> DIV ---> mck0
mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking
while changing FRAC PLL or DIV PLL the commit implements a notifier for
mck0 which applies a safe divider to register (maximum value of the divider
which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not
overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE
events.
Claudiu Beznea [Mon, 11 Oct 2021 11:27:15 +0000 (14:27 +0300)]
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts:
one fractional part and one divider. On SAMA7G5 the CPU PLL could be
changed at run-time to implement DVFS. The hardware clock tree on
SAMA7G5 for CPU PLL is as follows:
The div1 block is not implemented in Linux; on prescaler block it has
been discovered a bug on some scenarios and will be removed from Linux
in next commits. Thus, the final clock tree that will be used in Linux
will be as follows:
It has been proposed in [1] to not introduce a new CPUFreq driver but
to overload the proper clock drivers with proper operation such that
cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement
clock notifiers which applies safe dividers before FRAC PLL is changed.
The current commit treats only the DIV PLL by adding a notifier that
sets a safe divider on PRE_RATE_CHANGE events. The safe divider is
provided by initialization clock code (sama7g5.c). The div0 is treated
in next commits (to keep the changes as clean as possible).
Claudiu Beznea [Mon, 11 Oct 2021 11:27:12 +0000 (14:27 +0300)]
clk: at91: clk-master: check if div or pres is zero
Check if div or pres is zero before using it as argument for ffs().
In case div is zero ffs() will return 0 and thus substracting from
zero will lead to invalid values to be setup in registers.
Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock") Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:11 +0000 (14:27 +0300)]
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate
computed in sam9x60_frac_pll_recalc_rate() and the one computed in
sam9x60_frac_pll_compute_mul_frac().
Fixes: 43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-8-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:08 +0000 (14:27 +0300)]
clk: at91: clk-master: add register definition for sama7g5's master clock
SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the
register at offset 0x30 (relative to PMC). In the last/first phase of
suspend/resume procedure (which is architecture specific) the parent
of master clocks are changed (via assembly code) for more power saving
(see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable
and at91_mckx_ps_restore). Thus the macros corresponding to register
at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S.
commit ec03f18cc222 ("clk: at91: add register definition for sama7g5's
master clock") introduced the proper macros but didn't adapted the
clk-master.c as well. Thus, this commit adapt the clk-master.c to use
the macros introduced in commit ec03f18cc222 ("clk: at91: add register
definition for sama7g5's master clock").
Claudiu Beznea [Mon, 11 Oct 2021 11:27:06 +0000 (14:27 +0300)]
clk: at91: pmc: execute suspend/resume only for backup mode
Before going to backup mode architecture specific PM code sets the first
word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()).
Thus take this into account when suspending/resuming clocks. This will
avoid executing unnecessary instructions when suspending to non backup
modes.
Claudiu Beznea [Mon, 11 Oct 2021 11:27:05 +0000 (14:27 +0300)]
clk: at91: re-factor clocks suspend/resume
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
most of the SoC's components are powered off (including PMC). Resuming
from this mode is done with the help of bootloader. Peripherals are not
aware of the power saving mode thus most of them are disabling clocks in
proper suspend API and re-enable them in resume API without taking into
account the previously setup rate. Moreover some of the peripherals are
acting as wakeup sources and are not disabling the clocks in this
scenario, when suspending. Since backup mode cuts the power for
peripherals, in resume part these clocks needs to be re-configured.
The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
(as it was the only one supporting backup mode). SAMA7G supports also
backup mode and its PMC is different (few new functionalities, different
registers offsets, different offsets in registers for each
functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
.save_context()/.resume_context() support to each clocks driver and call
this from PMC driver.
clk: ux500: Add driver for the reset portions of PRCC
The Ux500 PRCC (peripheral reset and clock controller) can also
control reset of the IP blocks, not just clocks. As the PRCC is probed
as a clock controller and we have other platforms implementing combined
clock and reset controllers, follow this pattern and implement the PRCC
rest controller as part of the clock driver.
The reset controller needs to be selected from the machine as Ux500 has
traditionally selected its mandatory subsystem prerequisites from there.
dt-bindings: clock: u8500: Rewrite in YAML and extend
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them
with the PRCC reset controller.
The bindings are a bit idiomatic but it just reflects their age, the ux500
platform was used as guinea pig for early device tree conversion of platforms
in 2015. The new subnode for the reset controller follows the pattern of the
old bindings and adds a node with reset-cells for this.
Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Tue, 26 Oct 2021 19:47:45 +0000 (12:47 -0700)]
Merge tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung
Pull Samsung clk driver updates from Sylwester Nawrocki:
- Initial clock driver for the Exynos850 SoC
- Refactoring of the CPU clock code and conversion of Exynos5433
CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
* tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
Stephen Boyd [Tue, 26 Oct 2021 19:44:32 +0000 (12:44 -0700)]
Merge tag 'clk-meson-v5.16-1' of https://github.com/BayLibre/clk-meson into clk-amlogic
Pull Amlogic clock driver updates from Jerome Brunet:
- Update video path realted clocks for meson8
* tag 'clk-meson-v5.16-1' of https://github.com/BayLibre/clk-meson:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
Stephen Boyd [Tue, 26 Oct 2021 19:37:38 +0000 (12:37 -0700)]
Merge tag 'sunxi-clk-for-5.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner
Pull Allwinner clk driver updates from Maxime Ripard:
Our usual PR for the Allwinner SoCs, this time improving the module
support and converting to more helpers.
* tag 'sunxi-clk-for-5.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
clk: composite: Use rate_ops.determine_rate when also a mux is available
Update clk_composite_determine_rate() to use rate_ops.determine_rate
when available in combination with a mux. So far clk_divider_ops provide
both, .round_rate and .determine_rate. Removing the former would make
clk-composite fail silently for example on Rockchip platforms (which
heavily use composite clocks).
Add support for using rate_ops.determine_rate when either
rate_ops.round_rate is not available or both (.round_rate and
.determine_rate) are provided.
Suggested-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211016105022.303413-3-martin.blumenstingl@googlemail.com Tested-by: Alex Bee <knaerzche@gmail.com> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: composite: Also consider .determine_rate for rate + mux composites
Commit 69a00fb3d69706 ("clk: divider: Implement and wire up
.determine_rate by default") switches clk_divider_ops to implement
.determine_rate by default. This breaks composite clocks with multiple
parents because clk-composite.c does not use the special handling for
mux + divider combinations anymore (that was restricted to rate clocks
which only implement .round_rate, but not .determine_rate).
Alex reports:
This breaks lot of clocks for Rockchip which intensively uses
composites, i.e. those clocks will always stay at the initial parent,
which in some cases is the XTAL clock and I strongly guess it is the
same for other platforms, which use composite clocks having more than
one parent (e.g. mediatek, ti ...)
Example (RK3399)
clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot.
It will always stay at this parent, even if the mmc driver sets a rate
of 200 MHz (fails, as the nature of things), which should switch it
to any of its possible parent PLLs defined in
mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c) - which
never happens.
Restore the original behavior by changing the priority of the conditions
inside clk-composite.c. Now the special rate + mux case (with rate_ops
having a .round_rate - which is still the case for the default
clk_divider_ops) is preferred over rate_ops which have .determine_rate
defined (and not further considering the mux).
Fixes: 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default") Reported-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211016105022.303413-2-martin.blumenstingl@googlemail.com Tested-by: Alex Bee <knaerzche@gmail.com> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Fri, 15 Oct 2021 21:57:57 +0000 (14:57 -0700)]
Merge tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Add SPI Multi I/O Bus and SDHI clocks and resets on RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on R-Car V3U
- Add MediaLB clocks on R-Car H3, M3-W/W+, and M3-N
* tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a779[56]x: Add MLP clocks
clk: renesas: r9a07g044: Add SDHI clock and reset entries
clk: renesas: rzg2l: Add SDHI clk mux support
clk: renesas: r8a779a0: Add RPC support
clk: renesas: cpg-lib: Move RPC clock registration to the library
clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller
Will McVicker [Thu, 14 Oct 2021 19:53:46 +0000 (19:53 +0000)]
clk: samsung: exynos5433: update apollo and atlas clock probing
Use the samsung common clk driver to initialize the apollo and atlas
clocks. This removes their custom init functions and uses the
samsung_cmu_register_one() instead.
Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211014195347.3635601-3-willmcvicker@google.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Will McVicker [Thu, 14 Oct 2021 19:53:45 +0000 (19:53 +0000)]
clk: samsung: add support for CPU clocks
Adds 'struct samsung_cpu_clock' and corresponding CPU clock registration
function to the samsung common clk driver. This allows samsung clock
drivers to register their CPU clocks with the samsung_cmu_register_one()
API.
Currently the exynos5433 apollo and atlas clks have their own custom
init functions to handle registering their CPU clocks. With this patch
we can drop their custom CLK_OF_DECLARE functions and directly call
samsung_cmu_register_one().
Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211014195347.3635601-2-willmcvicker@google.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sam Protsenko [Fri, 8 Oct 2021 15:43:52 +0000 (18:43 +0300)]
clk: samsung: Introduce Exynos850 clock driver
This is the initial implementation adding only basic clocks like UART,
MMC, I2C and corresponding parent clocks. Design is influenced by
Exynos5433 clock driver.
Bus clock is enabled by default (in probe function) for all CMUs except
CMU_TOP, the reasoning is as follows. By default if bus clock has no
users its "enable count" value is 0. It might be actually running if
it's already enabled in bootloader, but then in some cases it can be
disabled by mistake. For example, such case was observed when
dw_mci_probe() enabled the bus clock, then failed to do something and
disabled that bus clock on error path. After that, even the attempt to
read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock
ended up being disabled and it wasn't possible to access CMU registers
anymore.
To avoid such cases, CMU driver must increment the ref count for that
bus clock by running clk_prepare_enable(). There is already existing
'.clk_name' field in struct samsung_cmu_info, exactly for that reason.
It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
support for runtime PM"), with next mentioning in commit message:
> Also for each CMU there is one special parent clock, which has to be
> enabled all the time when any access to CMU registers is being done.
But that clock is actually only enabled in Exynos5433 clock driver right
now. So the same code is added to exynos850_cmu_probe() function,
As was described above, it might be helpful not only for PM reasons, but
also to prevent possible erroneous clock gating on error paths.
Another way to workaround that issue would be to use CLOCK_IS_CRITICAL
flag for corresponding gate clocks. But that might be not very good
design decision, as we might still want to disable that bus clock, e.g.
on PM suspend.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-6-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Jean Delvare [Wed, 1 Sep 2021 16:09:53 +0000 (18:09 +0200)]
clk: versatile: hide clock drivers from non-ARM users
Commit 419b3ab6987f ("clk: versatile: remove dependency on ARCH_*")
made the whole menu of ARM reference clock drivers visible on all
architectures. I can't see how this is an improvement for non-ARM
users. Unless build-testing, there is no point on presenting
ARM-only clock drivers on other architectures.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Peter Collingbourne <pcc@google.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210901180953.5bd2a994@endymion Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Dmitry Baryshkov [Sun, 29 Aug 2021 15:47:54 +0000 (18:47 +0300)]
clk: qcom: gdsc: enable optional power domain support
On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Currently we use a regulator to enable this domain on demand,
however this has some consequences, as genpd code is not reentrant.
Make gdsc code also use pm_runtime calls to ensure that registers are
accessible during the gdsc_enable/gdsc_disable operations.
Dmitry Baryshkov [Sun, 29 Aug 2021 15:47:53 +0000 (18:47 +0300)]
clk: qcom: videocc-sm8250: use runtime PM for the clock controller
On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Use runtime PM calls to make sure that required power domain is
powered on while we access clock controller's registers.
Dmitry Baryshkov [Sun, 29 Aug 2021 15:47:52 +0000 (18:47 +0300)]
clk: qcom: dispcc-sm8250: use runtime PM for the clock controller
On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Use runtime PM calls to make sure that required power domain is
powered on while we access clock controller's registers.
Dmitry Baryshkov [Sun, 29 Aug 2021 15:47:51 +0000 (18:47 +0300)]
dt-bindings: clock: qcom,videocc: add mmcx power domain
On sm8250 videocc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.
Dmitry Baryshkov [Sun, 29 Aug 2021 15:47:50 +0000 (18:47 +0300)]
dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
On sm8250 dispcc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.
Stephen Boyd [Thu, 14 Oct 2021 01:17:06 +0000 (18:17 -0700)]
Merge tag 'clk-imx-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clk driver changes from Abel Vesa:
- Remove unused helpers from i.MX specific clock header
- Rework all clk based helpers to use clk_hw based ones
- Rework gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Add i.MX8ULP clock driver and related bindings
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
* tag 'clk-imx-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (21 commits)
clk: imx: Make CLK_IMX8ULP select MXC_CLK
clk: imx: imx6ul: Fix csi clk gate register
clk: imx: imx6ul: Move csi_sel mux to correct base register
clk: imx: Fix the build break when clk-imx8ulp build as module
clk: imx: Add the pcc reset controller support on imx8ulp
clk: imx: Add clock driver for imx8ulp
clk: imx: Update the pfdv2 for 8ulp specific support
clk: imx: disable the pfd when set pfdv2 clock rate
clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
clk: imx: disable i.mx7ulp composite clock during initialization
clk: imx: Update the compsite driver to support imx8ulp
clk: imx: Update the pllv4 to support imx8ulp
dt-bindings: clock: Add imx8ulp clock support
clk: imx: Rework imx_clk_hw_pll14xx wrapper
clk: imx: Rework all imx_clk_hw_composite wrappers
clk: imx: Rework all clk_hw_register_divider wrappers
clk: imx: Rework all clk_hw_register_mux wrappers
clk: imx: Rework all clk_hw_register_gate2 wrappers
clk: imx: Rework all clk_hw_register_gate wrappers
clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
...
Taniya Das [Thu, 7 Oct 2021 00:43:44 +0000 (06:13 +0530)]
dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280
The camera clock controller clock provider have a bunch of generic
properties that are needed in a device tree. Add the CAMCC clock IDs for
camera client to request for the clocks.
Taniya Das [Wed, 6 Oct 2021 01:40:16 +0000 (07:10 +0530)]
clk: qcom: Add lpass clock controller driver for SC7280
Add support for the lpass clock controller found on SC7280 based devices.
This would allow lpass peripheral loader drivers to control the clocks to
bring the subsystem out of reset.
Taniya Das [Wed, 6 Oct 2021 01:40:15 +0000 (07:10 +0530)]
dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Add the LPASS clock IDs for
LPASS PIL client to request for the clocks.
clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc
As also shown on downstream dts[1], for a correct operation of the
Venus block, we have to retain MEM/PERIPH when halting the video_core,
video_axi and video_subcore0 branches: add these CXCs to the main
Venus GDSC.
clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops
As there is a `rate` field in clk_smd_rpm, clk_smd_rpm_recalc_rate() can
be used by branch clocks to report rate as well, rather than assuming
the rate is always same as parent clock. This assumption doesn't hold
on platforms like QCM2290, where xo_board is 38.4MHz while bi_tcxo is
19.2MHz.
To get this work, XO buffered clocks need the following updates.
- Assign a correct rate rather than the fake one which is being used to
generate binary value for clk_smd_rpm_req interface.
- Explicitly handle the clk_smd_rpm_req interface value for XO buffered
clocks (.rpm_res_type being QCOM_SMD_RPM_CLK_BUF_A).
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210917030434.19859-2-shawn.guo@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: Do cpu_to_le32() again to keep sparse happy] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sam Protsenko [Fri, 8 Oct 2021 15:43:50 +0000 (18:43 +0300)]
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
Clock controller driver is designed to have separate instances for each
particular CMU. So clock IDs in this bindings header also start from 1
for each CMU.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211008154352.19519-4-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sam Protsenko [Fri, 8 Oct 2021 15:43:49 +0000 (18:43 +0300)]
clk: samsung: clk-pll: Implement pll0831x PLL type
pll0831x PLL is used in Exynos850 SoC for top-level fractional PLLs. The
code was derived from very similar pll36xx type, with next differences:
1. Lock time for pll0831x is 500*P_DIV, when for pll36xx it's 3000*P_DIV
2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require
performing PLL lock procedure (which is done in pll36xx
implementation)
3. The offset from PMS-values register to K-value register is 0x8 for
pll0831x, when for pll36xx it's 0x4
When defining pll0831x type, CON3 register offset should be provided as
a "con" parameter of PLL() macro, like this:
as it's completely appropriate for pl0831x type and there is no sense in
duplicating that.
If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be
possible to set new rate, with next error showing in kernel log:
Could not lock PLL fout_mmc_pll
That can happen for example if bootloader clears that bit beforehand.
PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was
cleared, it's assumed it was done for a reason and it shouldn't be
possible to change that PLL's rate at all.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-3-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sam Protsenko [Fri, 8 Oct 2021 15:43:48 +0000 (18:43 +0300)]
clk: samsung: clk-pll: Implement pll0822x PLL type
pll0822x PLL is used in Exynos850 SoC for top-level integer PLLs. The
code was derived from very similar pll35xx type, with next differences:
1. Lock time for pll0822x is 150*P_DIV, when for pll35xx it's 270*P_DIV
2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require
performing PLL lock procedure (which is done in pll35xx
implementation)
When defining pll0822x type, CON3 register offset should be provided as
a "con" parameter of PLL() macro, like this:
To define PLL rates table, one can use PLL_35XX_RATE() macro, e.g.:
PLL_35XX_RATE(26 * MHZ, 1600 * MHZ, 800, 13, 0)
as it's completely appropriate for pl0822x type and there is no sense in
duplicating that.
If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be
possible to set new rate, with next error showing in kernel log:
Could not lock PLL fout_shared1_pll
That can happen for example if bootloader clears that bit beforehand.
PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was
cleared, it's assumed it was done for a reason and it shouldn't be
possible to change that PLL's rate at all.
Wolfram Sang [Wed, 6 Oct 2021 08:58:33 +0000 (10:58 +0200)]
clk: renesas: cpg-lib: Move RPC clock registration to the library
We want to reuse this code for V3U soon. Because its RPCCKCR register is
at a different offset, the moved functions do not use the base register
as an argument anymore but the RPCCKCR register itself. Verified that an
Eagle board with R-Car V3M still works.
clk: at91: check pmc node status before registering syscore ops
Currently, at91 pmc driver always register the syscore_ops whatever
the status of the pmc node that has been found. When set as secure
and disabled, the pmc should not be accessed or this will generate
abort exceptions.
To avoid this, add a check on node availability before registering
the syscore operations.
Fabio Estevam [Wed, 6 Oct 2021 19:00:08 +0000 (16:00 -0300)]
clk: imx: Make CLK_IMX8ULP select MXC_CLK
Building CLK_IMX8ULP without selecting MXC_CLK causes the following
build errors:
ld: drivers/clk/imx/clk-imx8ulp.o: in function `imx8ulp_clk_cgc2_init':
clk-imx8ulp.c:(.text+0xd0): undefined reference to `imx_ccm_lock'
ld: clk-imx8ulp.c:(.text+0x14f): undefined reference to `imx_clk_hw_pllv4'
ld: clk-imx8ulp.c:(.text+0x15a): undefined reference to `imx_ccm_lock'
Avoid this problem by making CLK_IMX8ULP select MXC_CLK.
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211006190008.1935051-1-festevam@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
According to the imx6ul Reference Manual the csi clk gate register is
CCM_CCGR3 (offset 0x74) bit 0/1. For the imx6ull on the other hand the
Reference Manual lists register CCM_CCGR2 (offset 0x70) bit 2/3 as the
csi clk gate which is the current setting.
Tests have shown though that the correct csi clk gate register for the
imx6ull is actually CCM_CCGR3 bit 0/1 as well. Thus set the correct
register for both platforms.
clk: imx: imx6ul: Move csi_sel mux to correct base register
The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.
Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.
Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.
Jacky Bai [Fri, 17 Sep 2021 06:16:29 +0000 (14:16 +0800)]
clk: imx: Fix the build break when clk-imx8ulp build as module
Export the necessary symbols to fix the build break when clk-imx8ulp
build as module
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210917061629.3798360-1-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Jacky Bai [Tue, 14 Sep 2021 06:52:08 +0000 (14:52 +0800)]
clk: imx: Add the pcc reset controller support on imx8ulp
On i.MX8ULP, for some of the PCCs, it has a peripheral SW RST bit
resides in the same registers as the clock controller. So add this
SW RST controller support alongs with the pcc clock initialization.
the reset and clock shared the same register, to avoid accessing
the same register by reset control and clock control concurrently,
locking is necessary, so reuse the imx_ccm_lock spinlock to simplify
the code.
Jacky Bai [Tue, 14 Sep 2021 06:52:06 +0000 (14:52 +0800)]
clk: imx: Update the pfdv2 for 8ulp specific support
On i.MX8ULP, the 'CLK_SET_RATE_PARENT' flag should NOT be
set and according to the laest RM, the PFD divider value range
seems will be changed in the future, so update the pfdv2 to
include the specific support for i.MX8ULP.
Jacky Bai [Tue, 14 Sep 2021 06:52:05 +0000 (14:52 +0800)]
clk: imx: disable the pfd when set pfdv2 clock rate
It is possible that a PFD is enabled in HW but not in SW. That
means the enable count & prepare count of the PFD clock is '0',
so the 'CLK_SET_RATE' flag can do nothing when the rate is changed
while the PFD is hw enabled. In order to safely change the pfd
rate, we can disable the PFD directly if it is hw enabled but not
used by SW end user.
projects / thirdparty / kernel / linux.git / log
