Richard Purdie [Sat, 27 May 2023 15:07:31 +0000 (16:07 +0100)]
glib: Fix ptest race issue
gio/tests/portal: Fix test ordering race
When the gnome test runner executes the tests, the test appear to execute in disk
order. This means it sometimes works and we sometimes see breakage in portal-support-snap
and portal-support-snap-classic.
The issue is that some tests create config files but some don't. If they run
in the wrong order, tests see config files they shouldn't and break.
Fix this by deleting the files after each test run, properly cleaning up after
themselves. There are probably better ways to handle this but this patch should
at least let us check this is the issue.
I've tried to report upstream but their issue tracker account creation is struggling
and I can't get my account to work.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 27 May 2023 02:21:15 +0000 (19:21 -0700)]
gcc: Upgrade to 13.1.1
Some distros e.g. gentoo have latest on gcc-13 branch and we have a
situation where libstdc++ ABI is changed between 13.1 and 13.2 so
official 13.1 release based uninative will no longer work on these
distros, therefore switch to a snapshot that includes [1] which fixes
it
Richard Purdie [Thu, 25 May 2023 23:09:35 +0000 (00:09 +0100)]
glib-2.0: Fix TMPDIR mismatch test failures
gcc 13 appears to trigger TMPDIR changes in glib which causes ptest failures:
FAIL: glib/utils-c-90.test (Child process killed by signal 6)
FAIL: glib/utils.test (Child process killed by signal 6)
FAIL: glib/utils-c-99.test (Child process killed by signal 6)
FAIL: glib/utils-c-17.test (Child process killed by signal 6)
FAIL: glib/utils-c-11.test (Child process killed by signal 6)
The issue is caused by our symlinks between tmp directories which
cause the tests to get confused. We can set G_TEST_TMPDIR to
a resolved path using readlink to avoid the failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Package libhwasan_preinit.o, its available on some arches e.g. x86_64 on
gcc13+
- GCC 13 Porting guide [1] and major changes [2] and detailed documentation [3]
- Fix aarch64 cross build when S != B
Richard Purdie [Thu, 25 May 2023 12:28:52 +0000 (13:28 +0100)]
linux-yocto: Drop 5.15 support
5.15 doesn't work with gcc 13 and we'll be replacing 5.15 with a new kernel
version later in the release cycle. Drop 5.15 now so we can move forward
with gcc 13 and we'll add a new kernel version later.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 24 May 2023 22:59:48 +0000 (15:59 -0700)]
go: Use -no-pie to build target cgo
Fixes
go: ELF binary /usr/lib/go/pkg/tool/linux_arm64/pprof has relocations in .text
go: ELF binary /usr/lib/go/bin/go has relocations in .text [textrel]
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Wed, 24 May 2023 09:23:58 +0000 (17:23 +0800)]
pm-utils: fix multilib conflictions
It fails to instal pm-utils and lib32-pm-utils at same time:
Error: Transaction test error:
file /usr/bin/pm-is-supported conflicts between attempted installs of lib32-pm-utils-1.4.1-r1.corei7_32 and pm-utils-1.4.1-r1.corei7_64
file /usr/sbin/pm-hibernate conflicts between attempted installs of lib32-pm-utils-1.4.1-r1.corei7_32 and pm-utils-1.4.1-r1.corei7_64
file /usr/sbin/pm-powersave conflicts between attempted installs of lib32-pm-utils-1.4.1-r1.corei7_32 and pm-utils-1.4.1-r1.corei7_64
file /usr/sbin/pm-suspend conflicts between attempted installs of lib32-pm-utils-1.4.1-r1.corei7_32 and pm-utils-1.4.1-r1.corei7_64
file /usr/sbin/pm-suspend-hybrid conflicts between attempted installs of lib32-pm-utils-1.4.1-r1.corei7_32 and pm-utils-1.4.1-r1.corei7_64
All of the conflicted files either is script which source a file in
${libdir}, or a link file to some file in ${libdir}. Compare the content
of installed files in ${libdir} exclude binaries, only the paths of
${libdir} diff. So re-define libdir with ${nonarch_libdir} to fix the
conflicts.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 24 May 2023 07:53:15 +0000 (09:53 +0200)]
libx11: remove unused patch and FILESEXTRAPATHS
* 0001-fix-a-memory-leak-in-XRegisterIMInstantiateCallback.patch was removed
from SRC_URI in:
https://git.openembedded.org/openembedded-core/commit/?id=e13f651f73db0f26f4645447ab5fa17e36d1903b
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Frieder Schrempf [Tue, 23 May 2023 15:39:55 +0000 (17:39 +0200)]
psmisc: Set ALTERNATIVE for pstree to resolve conflict with busybox
If pstree in busybox is enabled there is a conflict with pstree from
psmisc resulting in:
do_rootfs: Postinstall scriptlets of ['busybox'] have failed. If
the intention is to defer them to first boot, then please place
them into pkg_postinst_ontarget:${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
And more detailed in do_rootfs.log:
update-alternatives: Error: not linking [...]/rootfs/usr/bin/pstree to /bin/busybox.nosuid since [...]/rootfs/usr/bin/pstree exists and is not a link
On order to fix this set ALTERNATIVE:pstree accordingly.
Martin Jansa [Tue, 23 May 2023 09:48:01 +0000 (11:48 +0200)]
rpm: drop unused 0001-Rip-out-partial-support-for-unused-MD2-and-RIPEMD160.patch
* it was removed from SRC_URI in oe-core commit:
commit 67257ca87c6fa8e6050a20ecea50daf834c7e869
Author: Alexander Kanavin <alex.kanavin@gmail.com>
Date: Sat Apr 25 19:28:00 2020 +0200
Subject: rpm: upgrade to 4.15.1
and it's unused since then
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the protocol used to fetch the Git repository was changed from
"git" to "https" in commit 139102a73d (recipes: Default to https git
protocol where possible), the URI was not updated to match.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glib-2.0: Avoid having g_futex_simple() inadvertently modify errno
If both __NR_futex and __NR_futex_time64 are defined, g_futex_simple()
will first call futex_time64(). If that fails with ENOSYS, then
futex_time() is called instead. However, errno was not saved and
restored in this case, which would result in g_futex_simple()
returning with errno set to ENOSYS, even if futex_time() succeeded.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randolph Sapp [Mon, 22 May 2023 20:46:12 +0000 (15:46 -0500)]
kernel-devicetree: recursively search for dtbs
Upstream's dtb directory structure has no real standard. They just tend
to idle around the 2/3 directory depth. Recursively search for the
dtb/dtbo files instead of assuming anything.
Fixes: 04ab57d200 (kernel-devicetree: allow specification of dtb
directory, 2023-05-02)
Randolph Sapp [Mon, 22 May 2023 20:46:11 +0000 (15:46 -0500)]
package: enable recursion on file globs
Enable recursion of file globs. This just allows the use of '**' in file
globs to match 0 or more subdirectories, it should not make all current
globs recursive [1].
Martin Jansa [Tue, 2 May 2023 14:44:06 +0000 (07:44 -0700)]
binutils: package static libs from gprofng
* fixes:
ERROR: binutils-2.40-r0 do_package: QA Issue: binutils: Files/directories were installed but not shipped in any package:
/usr/lib/gprofng/libgp-collectorAPI.a
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
binutils: 1 installed and not shipped files. [installed-vs-shipped]
Deepthi Hemraj [Tue, 2 May 2023 14:44:05 +0000 (07:44 -0700)]
binutils: stable 2.40 branch updates
- Rebase existing patches
- Drop 0014-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch
which is already in
- Correct packaging path to libgprofng.so
- Below commits on binutils-2.40 stable branch are updated.
4671be001eb Updated Hungarian translation for the gprof directory ded035f913e lto: Don't add indirect symbols for versioned aliases in IR 74cb2ddeabc gas: arm: Change warning message to not reference specific A-class architecture revision 570b9c09bbf gas: arm: Fix a further IT-predicated vcvt issue in the presense of MVE vcvtn bddd62e188c libctf: get the offsets of fields of unnamed structs/unions right 7aa47eafcce libctf: fix assertion failure with no system qsort_r 165accf0752 coff_get_normalized_symtab bfd_release af35798e957 PR30217, dynamic relocations using local dynamic symbols 18bb604f1e1 PR30198, Assertion and segfault when linking x86_64 elf and coff 34a2b4a0e21 PR30155, ld segfault in _bfd_nearby_section 3d0046f39aa PR30046, power cmpi leads to unknown architecture 5c87fb1d59b ppc32 and "LOAD segment with RWX permissions" 11f5c1ebf14 Updated Serbian translations for gold, gprof and opcodes sub-directories 38e455b1d9a Updated translations for the bfd and gprof directories. b2bc62b7b4e gas: correct symbol name comparison in .startof./.sizeof. handling 17294931e3e configure: remove dependencies on gmp and mpfr when gdb is disabled 1fc096a4c59 Regen config files e1815414077 Pass $JANSSON_LIBS and $ZSTD_LIBS to ld-bootstrap/bootrap.exp 3e888977f16 bpf: fix error conversion from long unsigned int to unsigned int [-Werror=overflow] 65dbb942145 Updated Swedish translation for the binutils sub-directory 27f59ec47a1 RISC-V: make C-extension JAL available again for (32-bit) assembly edd36b26f35 gprofng: PR30043 libgprofng.so.* are installed to a wrong location c6e269febbc gprofng: PR29521 [docs] man pages are not in the release tarball bcea253f5fa toplevel: Makefile.def: add install-strip dependency on libsframe
Antonin Godard [Tue, 16 May 2023 15:56:39 +0000 (15:56 +0000)]
archiver: move exclusion logic in a dedicated function
Extending archiver is not possible without duplicating the anonymous
function's logic. Move this logic in a separate function
"include_package" which returns a bool.
Leon Anavi [Mon, 15 May 2023 12:00:10 +0000 (15:00 +0300)]
wic: Add argument --hidden to default imager
Add argument --hidden to avoid MS Windows prompting to format
partition after flashing to a USB stick, SD card on another media.
Set Bit 0 (RequiredPartition) to mark that the partition is
required for the platform to function on GUID Partition Table
(GPT).
The new argument simplifies setting RequiredPartition on GPT
through a WKS file and the default imager plugin. Otherwise,
without this feature, to achieve the same result a new imager
plugin has to be implemented and set in WIC_CREATE_EXTRA_ARGS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mikko Rapeli [Wed, 10 May 2023 12:59:35 +0000 (15:59 +0300)]
qemurunner: add boot logs to do_testimage task logs in real time
Complex boot sequences take a lot of time to reach serial console login.
In our case boot involves multiple bootloaders like u-boot and grub,
then hypervisors like xen, then initramfs images which do things like
validating secure boot and encrypting the main rootfs. All these happen
before main rootfs serial console login prompt is reached and thus many
things can go wrong, including race conditions, hangs and deadlocks, and
thus logging the details is important for development.
This change adds the qemu serial console logs to do_testimage task logs while
they are being read out. The logs are not added to bitbake output. This
enables debugging and tracing the do_testimage via task log file while the boot
and tests are running.
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Thomas Roos [Wed, 17 May 2023 12:13:53 +0000 (14:13 +0200)]
oeqa: adding selftest-hello and use it to speed up tests
Adding a selftest version of hello world to run it in tests where no download is necessary.
Also using this in several tests to speed them up.
Using the -native version wherever possible will also speed up tests a lot.
[YOCTO #11142]
Signed-off-by: Thomas Roos <throos@amazon.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Extend the manifest with definitions for the turtle package from the
Python standard library. Currently this package cannot be imported at
run-time because python3-misc doesn't pull the required dependencies.
Extend the manifest with definitions for the zipapp package from the
Python standard library. Currently this package cannot be imported at
run-time because python3-misc doesn't pull the required dependencies.
Extend the manifest with definitions for the cgitb package from the
Python standard library. Currently this package cannot be imported at
run-time because python3-misc doesn't pull the required dependencies.
python3-setuptools-rust: fix RDEPENDS and allow target build
Cargo and rustc can now be built for the target architecture. There's no
reason to limit the setuptools rust extensions to native build only so
make the RDEPENDS global. Also: add the missing ones.
The nativesdk and target RDEPENDS are the same and there's nothing that
prohibits this package from build built for the native sysroot either.
Use the global RDEPENDS instead of per-class assignments.
While at it: order the dependencies alphabetically.
Wang Mingyu [Wed, 17 May 2023 06:33:56 +0000 (14:33 +0800)]
iso-codes: upgrade 4.13.0 -> 4.15.0
Changelog:
==========
- Translation updates for ISO 3166-1
- Translation updates for ISO 3166-3
- Translation updates for ISO 639-2
- Translation updates for ISO 3166-1
- Translation updates for ISO 3166-2
- Translation updates for ISO 3166-3
- Translation updates for ISO 639-2
- Translation updates for ISO 639-3
- Translation updates for ISO 639-5
- Translation updates for ISO 4217
- Translation updates for ISO 15924
* ISO 3166-2: Fix wrong Spanish translation
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ross Burton [Tue, 16 May 2023 18:40:26 +0000 (19:40 +0100)]
gobject-introspection: always DEPEND on gobject-introspection-native
If a recipe inherits gobject-introspection then there's a good chance
that it needs the gobject-introspection-native recipe for the m4 macros
in introspection.m4, because we always autoreconf so we always need the
macros to be present.
Change the dependencies so that inheriting g-i always adds a dependency
on gobject-introspection-native, and a dependency on qemu-native and
target gobject-introspection if G-I is enabled.
Ross Burton [Tue, 16 May 2023 18:40:25 +0000 (19:40 +0100)]
meta: depend on autoconf-archive-native, not autoconf-archive
autoconf-archive is a collection of m4 autoconf macros needed at
build-time, and autoconf-archive-native is a suitable provider as there
is nothing in the recipe that needs to be cross-compiled.
Also if we use DEPENDS=autoconf-archive then the recipe's -dev package
ends up RDEPENDing on autoconf-archive, which isn't correct.
Universally change any DEPENDS on autoconf-archive to the -native form,
and add any missing dependencies that were implicit before.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ross Burton [Tue, 16 May 2023 13:57:02 +0000 (14:57 +0100)]
qemu: add PACKAGECONFIG for debuginfo support
qemu was auto-detecting the presence of libdw from elfutils, which
causes problems with a sstate object for qemu-native built with libdw is
ran on a machine without libdw.
We have no need for the debuginfo support to be enabled, so disable this
by default.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
5.4.3 (2023-05-04)
* All fixes from 5.2.12
* Features in the CMake build can now be disabled as CMake cache
variables, similar to the Autotools build.
* Minor update to the Croatian translation.
This release makes PCRE patterns like [\d] work again, at the expense of
reverting to the behavior of grep 3.8, in that patterns like \w and \b go
back to using ASCII rather than Unicode interpretations. However, if you
build grep using pcre2 newer than 10.42, then \w and \b do work properly.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
