Takashi Iwai [Wed, 20 Jan 2021 21:39:31 +0000 (22:39 +0100)]
ALSA: usb-audio: Skip the clock selector inquiry for single connections
The current USB-audio driver gets an error at probing NUX MG-300 about
parsing the clocks. This is because the firmware doesn't return the
proper connection of the clock selector that is connected to a single
clock; it's likely that the firmware was lazy^w optimized and the
inquiry wasn't handled. Actually it makes little sense to inquire and
set up the single connection explicitly.
This patch fixes the issue by simply skipping the clock selector
inquiry if it's a single connection.
This adds the Pioneer DJ DJM-750 to the quirks table and ensures
skip_pioneer_sync_ep() is (also) called: this device uses the vendor
ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many
just like to be awkward it seems).
Playback on all 8 channels works. I'll likely keep this working in the
future and submit futher patches and improvements as necessary.
Takashi Iwai [Mon, 18 Jan 2021 07:58:16 +0000 (08:58 +0100)]
ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
For addressing the regression on Pioneer devices, we recently
corrected the quirk code to enable the implicit feedback mode on those
devices properly. However, the devices still showed problems with the
full duplex operations with JACK, and after debug sessions, we figured
out that the older kernels that had worked with JACK also didn't use
the implicit feedback mode at all although they had the quirk code to
enable it; instead, the old code worked just to skip the normal sync
endpoint setup that would have been detected without it. IOW, what
broke without the implicit-fb quirk in the past was the application of
the normal sync endpoint that is actually the capture data endpoint on
these devices.
This patch covers the overseen piece: it modifies the quirk code again
not to enable the implicit feedback mode but just to make the driver
skipping the sync endpoint detection. This made the driver working
with JACK full-duplex mode again.
Still it's not quite clear why the implicit feedback doesn't work on
those devices yet; maybe it's about some issues in the URB setup. But
at least, with this patch, the driver should work in the level of the
older kernels again.
Takashi Iwai [Mon, 18 Jan 2021 07:58:15 +0000 (08:58 +0100)]
ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
The UAC2/3 sample rate setup is based on the clock node, which is
usually shared in the interface, and can't be re-setup without
deselecting the interface once, and that's how the current code
behaves. OTOH, the sample rate setup of UAC1 is per endpoint, hence
we basically need to call for each endpoint usage even if those share
the same interface.
This patch fixes the behavior of UAC1 to call always
snd_usb_init_sample_rate() in snd_usb_endpoint_configure().
Takashi Iwai [Mon, 18 Jan 2021 07:58:14 +0000 (08:58 +0100)]
ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
The current sample rate setup function for UAC1 assumes only the first
endpoint retrieved from the interface:altset pair, but the rate set up
may be needed also for the secondary endpoint. Also, retrieving the
endpoint number from the interface descriptor is redundant; we have
already the target endpoint in the given audioformat object.
This patch simplifies the code and corrects the target endpoint as
described in the above. It simply refers to fmt->endpoint directly.
Also, this patch drops the pioneer_djm_set_format_quirk() that is
caleld from snd_usb_set_format_quirk(); this function does the sample
rate setup but for the capture endpoint (0x82), and that's exactly
what the change above fixes.
Takashi Sakamoto [Fri, 15 Jan 2021 03:56:23 +0000 (12:56 +0900)]
ALSA: dice: add support for Lexicon I-ONIX FW810s
I-ONIX FW810s was shipped in Lexicon brand of HARMAN International
industries, Inc 2009. The model uses TCD2220 ASIC as its communication
engine. TCAT general protocol is supported, its extension isn't.
This patch adds support for the model with hard-coded stream formats.
root directory
-----------------------------------------------------------------
414 00064c2d directory_length 6, crc 19501
418 03000fd7 vendor
41c 8100000a --> descriptor leaf at 444
420 17000001 model
424 8100000d --> descriptor leaf at 458
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000438f2 directory_length 4, crc 14578
434 12000fd7 specifier id
438 13000001 version
43c 17000001 model
440 8100000d --> descriptor leaf at 474
Takashi Iwai [Fri, 15 Jan 2021 10:04:37 +0000 (11:04 +0100)]
ALSA: usb-audio: Convert the last strlcpy() usage
The last remaining usage of strlcpy() in USB-audio driver is the setup
of the card longname string. Basically we need to know whether any
non-empty string is set or not, and no real length is needed.
Refactor the code and use strscpy() instead. After this change,
strlcpy() is gone from all sound/* code.
Takashi Iwai [Fri, 15 Jan 2021 09:57:58 +0000 (10:57 +0100)]
ALSA: usb-audio: Convert remaining strlcpy() to strscpy()
USB-audio driver still contains two calls of strlcpy() because the
return size is evaluated. Basically it just checks whether the string
is copied or not, but since strcpy() may return a negative error code,
we should check the negative value and treat as filled.
Takashi Iwai [Fri, 15 Jan 2021 09:34:28 +0000 (10:34 +0100)]
ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()
snd_seq_oss_synth_make_info() didn't check the error code from
snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy()
with the uninitialized string as the source, which may lead to the
access over the limit.
Add the proper error check for avoiding the failure.
Takashi Iwai [Thu, 14 Jan 2021 07:24:53 +0000 (08:24 +0100)]
ALSA: hda/via: Add minimum mute flag
It turned out that VIA codecs also mute the sound in the lowest mixer
level. Turn on the dac_min_mute flag to indicate the mute-as-minimum
in TLV like already done in Conexant and IDT codecs.
Chris Chiu [Thu, 14 Jan 2021 08:27:28 +0000 (16:27 +0800)]
ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
The Acer Apire E5-575T laptop with codec ALC255 has a terrible
background noise comes from internal mic capture. And the jack
sensing dose not work for headset like some other Acer laptops.
This patch limits the internal mic boost on top of the existing
ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T.
Takashi Iwai [Mon, 11 Jan 2021 08:16:11 +0000 (09:16 +0100)]
ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for
implicit fb sync"), we apply the hw constraints for the implicit
feedback sync to make the secondary open aligned with the already
opened stream setup. This change assumed that the secondary open is
performed after the first stream has been already set up, and adds the
hw constraints to sync with the first stream's parameters only when
the EP setup for the first stream was confirmed at the open time.
However, most of applications handling the full-duplex operations do
open both playback and capture streams at first, then set up both
streams. This results in skipping the additional hw constraints since
the counter-part stream hasn't been set up yet at the open of the
second stream, and it eventually leads to "incompatible EP" error in
the end.
This patch corrects the behavior by always applying the hw constraints
for the implicit fb sync. The hw constraint rules are defined so that
they check the sync EP dynamically at each invocation, instead. This
covers the concurrent stream setups better and lets the hw refine
calls resolving to the right configuration.
Also this patch corrects a minor error that has existed in the debug
print that isn't built as default.
Peter Geis [Fri, 8 Jan 2021 13:59:13 +0000 (13:59 +0000)]
ALSA: hda/tegra: fix tegra-hda on tegra30 soc
Currently hda on tegra30 fails to open a stream with an input/output error.
For example:
speaker-test -Dhw:0,3 -c 2
speaker-test 1.2.2
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.
The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.
For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;
On Tegra30, ratio = 32/4 = 8 (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was
applied for it
If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.
Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.
[1] commit 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ion Agorria <ion@agorria.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Peter Geis [Fri, 8 Jan 2021 13:59:12 +0000 (13:59 +0000)]
clk: tegra30: Add hda clock default rates to clock driver
Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.
This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 8 Jan 2021 07:52:19 +0000 (08:52 +0100)]
ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices
Pioneer devices have both playback and capture streams sharing the
same iface/altsetting, and those need to be paired as implicit
feedback. Instead of a half-baked (and broken) static quirk entry,
set up more generically for those devices by checking the number of
endpoints and the attribute of the secondary EP.
Takashi Iwai [Fri, 8 Jan 2021 07:52:18 +0000 (08:52 +0100)]
ALSA: usb-audio: Annotate the endpoint index in audioformat
There are devices that have multiple endpoints sharing the same
iface/altset not only for sync but also for the actual streams, and
the audioformat for such an endpoint needs to be handled with the
proper endpoint index; otherwise it confuses the endpoint management.
This patch extends the audioformat to annotate the endpoint index, and
put the proper ep_idx=1 to Pioneer device quirk entries accordingly.
The current endpoint handling assumed (more or less) a unique 1:1
relation between the endpoint and the iface/altset. The exception was
the sync EP without the implicit feedback which has usually the
secondary EP of the same altset. This works fine for most devices,
but it turned out that some unusual devices like Pinoeer's ones have
both playback and capture endpoints in the same iface/altsetting and
use both for the implicit feedback mode. For handling such a case, we
need to extend the endpoint management to take the shared interface
into account.
This patch does that: it adds a new object snd_usb_iface_ref for
managing the reference counts of the each USB interface that is used
by each endpoint. The interface setup is performed only once for the
(sharing) endpoints, and the doubly initialization is avoided.
Along with this, the resource release of endpoints and interface
refcounts are put into a single function, snd_usb_endpoint_free_all()
instead of looping in the caller side.
Takashi Iwai [Fri, 8 Jan 2021 07:52:16 +0000 (08:52 +0100)]
ALSA: usb-audio: Choose audioformat of a counter-part substream
The implicit feedback mode needs to handle two endpoints and the
choice of the audioformat object for the sync EP is important since
this determines the compatibility of the hw_params. The current code
uses the same audioformat object if both the main EP and the sync EP
point to the same iface/altsetting. This was done in consideration of
the non-implicit-fb sync EP handling, and it doesn't match well with
the cases where actually to endpoints are defined in the sameiface /
altsetting like a few Pioneer devices.
Modify snd_usb_find_implicit_fb_sync_format() to pick up the
audioformat that is assigned in the counter-part substreams primarily,
so that the actual capture stream can be opened properly. We keep the
same audioformat object only as a fallback in case nothing found,
though.
Takashi Iwai [Fri, 8 Jan 2021 07:52:15 +0000 (08:52 +0100)]
ALSA: usb-audio: Fix the missing endpoints creations for quirks
The recent change in the endpoint management moved the endpoint object
creation from the stream open time to the parser of the audio
descriptor. It works fine for the standard audio, but it overlooked
the other places that create audio streams via quirks
(QUIRK_AUDIO_FIXED_ENDPOINT) like the reported a few Pioneer devices;
those call snd_usb_add_audio_stream() manually, hence they miss the
endpoints, eventually resulting in the error at opening streams.
Moreover, now the sync EP setup was moved to the explicit call of
snd_usb_audioformat_set_sync_ep(), and this needs to be added for
those places, too.
This patch addresses those regressions for quirks. It adds a local
helper function add_audio_stream_from_fixed_fmt(), which does the all
needed tasks, and replaces the calls of snd_usb_add_audio_stream()
with this new function.
Fixes: 54cb31901b83 ("ALSA: usb-audio: Create endpoint objects at parsing phase") Reported-by: František Kučera <konference@frantovo.cz> Link: https://lore.kernel.org/r/20210108075219.21463-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 4 Jan 2021 15:30:46 +0000 (16:30 +0100)]
ALSA: hda/via: Fix runtime PM for Clevo W35xSS
Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume. This
was worked around by disabling the default runtime PM via a denylist
entry. Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited. The
result was that disabling power_save_node feature suffices for the
runtime PM problem.
This patch implements the disablement of power_save_node feature in
VIA codec for the device. It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.
Fixes: b529ef2464ad ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist") Reported-by: Christian Labisch <clnetbox@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Timon Reinold [Sat, 2 Jan 2021 21:08:35 +0000 (22:08 +0100)]
ALSA: usb-audio: Add quirk for RC-505
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.
Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.
Takashi Iwai [Fri, 1 Jan 2021 08:38:52 +0000 (09:38 +0100)]
ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()
The silent_stream_disable() function introduced by the commit b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock. This patch corrects it.
Fixes: b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP") Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: <stable@vger.kernel.org> Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ThinkPad X395 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.
Use DMI to block the microphone PCM device for this platform.
When we try to play and capture simultaneously we see that
interrupts are genrated but our handler is not being acknowledged,
After investigating further more in detail on this issue we found
that IRQ delivery via MSI from the ACP IP is unreliable and so sometimes
interrupt generated will not be acknowledged so MSI model shouldn't be used
and using legacy IRQs will resolve interrupt handling issue.
This patch replaces MSI interrupt handling with legacy IRQ model.
Issue can be reproduced easily by running below python script:
Jaroslav Kysela [Sun, 27 Dec 2020 16:40:37 +0000 (17:40 +0100)]
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2
The ThinkPad E14 Gen 2 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.
Use DMI to block the microphone PCM device for this platform.
Linus Torvalds [Sun, 27 Dec 2020 18:56:33 +0000 (10:56 -0800)]
proc mountinfo: make splice available again
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.
Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.
This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 27 Dec 2020 17:03:41 +0000 (09:03 -0800)]
Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
Linus Torvalds [Sat, 26 Dec 2020 17:19:49 +0000 (09:19 -0800)]
mfd: ab8500-debugfs: Remove extraneous seq_putc
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PCI: dwc: Fix inverted condition of DMA mask setup warning
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.
Fix this by inverting the condition.
[bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.
Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Dec 2020 19:07:34 +0000 (11:07 -0800)]
Merge tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
cases in ARM machines.
- Fix memory leak when synthesizing SDT probes in 'perf probe'.
- Update kernel header copies related to KVM, epol_pwait. msr-index and
powerpc and s390 syscall tables.
* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
perf probe: Fix memory leak when synthesizing SDT probes
perf stat aggregation: Add separate thread member
perf stat aggregation: Add separate core member
perf stat aggregation: Add separate die member
perf stat aggregation: Add separate socket member
perf stat aggregation: Add separate node member
perf stat aggregation: Start using cpu_aggr_id in map
perf cpumap: Drop in cpu_aggr_map struct
perf cpumap: Add new map type for aggregation
perf stat: Replace aggregation ID with a struct
perf cpumap: Add new struct for cpu aggregation
perf cpumap: Use existing allocator to avoid using malloc
perf tests: Improve topology test to check all aggregation types
perf tools: Update s390's syscall.tbl copy from the kernel sources
perf tools: Update powerpc's syscall.tbl copy from the kernel sources
perf s390: Move syscall.tbl check into check-headers.sh
perf powerpc: Move syscall.tbl check to check-headers.sh
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers: Update KVM headers from the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
...
Linus Torvalds [Fri, 25 Dec 2020 19:05:32 +0000 (11:05 -0800)]
Merge branch 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall.
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Correct usage of make coccicheck
coccinelle: update expiring email addresses
coccinnelle: Remove ptr_ret script
kbuild: do not use scripts/ld-version.sh for checking spatch version
remove boolinit.cocci
Michael Ellerman [Fri, 25 Dec 2020 11:30:58 +0000 (22:30 +1100)]
genirq: Fix export of irq_to_desc() for powerpc KVM
Commit 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.
However it used:
#ifdef CONFIG_KVM_BOOK3S_64_HV
Which doesn't work when that symbol is =m, leading to a build failure:
Linus Torvalds [Fri, 25 Dec 2020 18:54:29 +0000 (10:54 -0800)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
Linus Torvalds [Thu, 24 Dec 2020 22:20:33 +0000 (14:20 -0800)]
Merge tag 'docs-5.11-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small set of late-arriving, small documentation fixes"
* tag 'docs-5.11-2' of git://git.lwn.net/linux:
docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst
Documentation/submitting-patches: Document the SoB chain
Documentation: process: Correct numbering
docs: submitting-patches: Trivial - fix grammatical error
Linus Torvalds [Thu, 24 Dec 2020 22:16:02 +0000 (14:16 -0800)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
Linus Torvalds [Thu, 24 Dec 2020 22:08:43 +0000 (14:08 -0800)]
Merge tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
Linus Torvalds [Thu, 24 Dec 2020 22:02:00 +0000 (14:02 -0800)]
Merge tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
Linus Torvalds [Thu, 24 Dec 2020 21:50:23 +0000 (13:50 -0800)]
Merge tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Linus Torvalds [Thu, 24 Dec 2020 20:40:07 +0000 (12:40 -0800)]
Merge tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
Linus Torvalds [Thu, 24 Dec 2020 20:35:00 +0000 (12:35 -0800)]
Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"All straight fixes, or a prep patch for a fix, either bound for stable
or fixing issues from this merge window. In particular:
- Fix new shutdown op not breaking links on failure
- Hold mm->mmap_sem for mm->locked_vm manipulation
* tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()
io_uring: fix double io_uring free
io_uring: fix ignoring xa_store errors
io_uring: end waiting before task cancel attempts
io_uring: always progress task_work on task cancel
io-wq: kill now unused io_wq_cancel_all()
io_uring: make ctx cancel on exit targeted to actual ctx
io_uring: fix 0-iov read buffer select
io_uring: close a small race gap for files cancel
io_uring: fix io_wqe->work_list corruption
io_uring: limit {io|sq}poll submit locking scope
io_uring: inline io_cqring_mark_overflow()
io_uring: consolidate CQ nr events calculation
io_uring: remove racy overflow list fast checks
io_uring: cancel reqs shouldn't kill overflow list
io_uring: hold mmap_sem for mm->locked_vm manipulation
io_uring: break links on shutdown failure
Linus Torvalds [Thu, 24 Dec 2020 20:28:35 +0000 (12:28 -0800)]
Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few stragglers in here, but mostly just straight fixes. In
particular:
- Set of rnbd fixes for issues around changes for the merge window
(Gioh, Jack, Md Haris Iqbal)
- iocost tracepoint addition (Baolin)
- Copyright/maintainers update (Christoph)
- Remove old blk-mq fast path CPU warning (Daniel)
- loop max_part fix (Josh)
- Remote IPI threaded IRQ fix (Sebastian)
- dasd stable fixes (Stefan)
- bcache merge window fixup and style fixup (Yi, Zheng)"
* tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
md/bcache: convert comma to semicolon
bcache:remove a superfluous check in register_bcache
block: update some copyrights
block: remove a pointless self-reference in block_dev.c
MAINTAINERS: add fs/block_dev.c to the block section
blk-mq: Don't complete on a remote CPU in force threaded mode
s390/dasd: fix list corruption of lcu list
s390/dasd: fix list corruption of pavgroup group list
s390/dasd: prevent inconsistent LCU device data
s390/dasd: fix hanging device offline processing
blk-iocost: Add iocg idle state tracepoint
nbd: Respect max_part for all partition scans
block/rnbd-clt: Does not request pdu to rtrs-clt
block/rnbd-clt: Dynamically allocate sglist for rnbd_iu
block/rnbd: Set write-back cache and fua same to the target device
block/rnbd: Fix typos
block/rnbd-srv: Protect dev session sysfs removal
block/rnbd-clt: Fix possible memleak
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy
blk-mq: Remove 'running from the wrong CPU' warning
Linus Torvalds [Thu, 24 Dec 2020 20:18:11 +0000 (12:18 -0800)]
Merge tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Twas the day before Christmas and the only thing stirring in libnvdimm
/ device-dax land is a pile of miscellaneous fixups and cleanups.
The bulk of it has appeared in -next save the last two patches to
device-dax that have passed my build and unit tests.
- Fix a long standing block-window-namespace issue surfaced by the
ndctl change to attempt to preserve the kernel device name over
a 'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups"
* tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
device-dax: Fix range release
device-dax: delete a redundancy check in dev_dax_validate_align()
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update
device-dax/core: Fix memory leak when rmmod dax.ko
device-dax/pmem: Convert comma to semicolon
libnvdimm: Cleanup include of badblocks.h
ACPI: NFIT: Fix input validation of bus-family
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels
ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
amdkfd:
- Properly require pcie atomics for gfx10"
* tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amd/display: Fix memory leaks in S3 resume
drm/amdgpu: Fix a copy-pasta comment
drm/amdgpu: only set DP subconnector type on DP and eDP connectors
drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw
drm/amd/display: add getter routine to retrieve mpcc mux
drm/amd/display: always program DPPDTO unless not safe to lower
drm/amd/display: [FW Promotion] Release 0.0.47
drm/amd/display: updated wm table for Renoir
drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe
drm/amd/display: Multi-display underflow observed
drm/amd/display: Remove unnecessary NULL check
drm/amd/display: Update RN/VGH active display count workaround
drm/amd/display: change SMU repsonse timeout to 2s.
drm/amd/display: gradually ramp ABM intensity
drm/amd/display: To modify the condition in indicating branch device
drm/amd/display: Modify the hdcp device count check condition
drm/amd/display: Interfaces for hubp blank and soft reset
drm/amd/display: handler not correctly checked at remove_irq_handler
drm/amdgpu: check gfx pipe availability before toggling its interrupts
drm/amdgpu: remove unnecessary asic type check
...
Linus Torvalds [Thu, 24 Dec 2020 20:06:46 +0000 (12:06 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
Zhen Lei [Sat, 19 Dec 2020 08:18:40 +0000 (16:18 +0800)]
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
Swap the calling sequence of krealloc() and __request_region(), call the
latter first. In this way, the value of dev_dax->nr_range does not need to
be considered when __request_region() failed.
Dan Williams [Sat, 19 Dec 2020 02:41:41 +0000 (18:41 -0800)]
device-dax: Fix range release
There are multiple locations that open-code the release of the last
range in a device-dax instance. Consolidate this into a new
dev_dax_trim_range() helper.
perf probe: Fix memory leak when synthesizing SDT probes
The argv_split() function must be paired with argv_free(), else we must
keep a reference to the argv array received or do the freeing ourselves,
in synthesize_sdt_probe_command() we were simply leaking that argv[]
array.
Fixes: 3b1f8311f6963cd1 ("perf probe: Add sdt probes arguments into the uprobe cmd string") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexis Berlemont <alexis.berlemont@gmail.com> Cc: He Zhe <zhe.he@windriver.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201224135139.GF477817@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:28 +0000 (16:13 +0200)]
perf stat aggregation: Add separate thread member
A separate field isn't strictly required. The core field could be
re-used for thread IDs as a single field was used previously.
But separating them will avoid confusion and catch potential errors
where core IDs are read as thread IDs and vice versa.
Also remove the placeholder id field which is now no longer used.
Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20201126141328.6509-13-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:27 +0000 (16:13 +0200)]
perf stat aggregation: Add separate core member
Add core as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20201126141328.6509-12-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:26 +0000 (16:13 +0200)]
perf stat aggregation: Add separate die member
Add die as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20201126141328.6509-11-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / thirdparty / kernel / linux.git / log
