Cosmin Ratiu [Mon, 5 May 2025 19:47:13 +0000 (22:47 +0300)]
net: Lock netdevices during dev_shutdown
__qdisc_destroy() calls into various qdiscs .destroy() op, which in turn
can call .ndo_setup_tc(), which requires the netdev instance lock.
This commit extends the critical section in
unregister_netdevice_many_notify() to cover dev_shutdown() (and
dev_tcx_uninstall() as a side-effect) and acquires the netdev instance
lock in __dev_change_net_namespace() for the other dev_shutdown() call.
This should now guarantee that for all qdisc ops, the netdev instance
lock is held during .ndo_setup_tc().
Fixes: a0527ee2df3f ("net: hold netdev instance lock during qdisc ndo_setup_tc") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250505194713.1723399-1-cratiu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Przemek Kitszel [Mon, 5 May 2025 16:19:38 +0000 (09:19 -0700)]
ice: use DSN instead of PCI BDF for ice_adapter index
Use Device Serial Number instead of PCI bus/device/function for
the index of struct ice_adapter.
Functions on the same physical device should point to the very same
ice_adapter instance, but with two PFs, when at least one of them is
PCI-e passed-through to a VM, it is no longer the case - PFs will get
seemingly random PCI BDF values, and thus indices, what finally leds to
each of them being on their own instance of ice_adapter. That causes them
to don't attempt any synchronization of the PTP HW clock usage, or any
other future resources.
DSN works nicely in place of the index, as it is "immutable" in terms of
virtualization.
Fixes: 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on the same NIC") Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei [Sat, 3 May 2025 04:30:50 +0000 (21:30 -0700)]
tools: ynl-gen: validate 0 len strings from kernel
Strings from the kernel are guaranteed to be null terminated and
ynl_attr_validate() checks for this. But it doesn't check if the string
has a len of 0, which would cause problems when trying to access
data[len - 1]. Fix this by checking that len is positive.
====================
selftests: drv: net: fix `ping.py` test failure
Fix `ping.py` test failure on an ipv6 system, and appropriately handle the
cases where either one of the two address families (ipv4, ipv6) is not
present.
====================
Mohsin Bashir [Sat, 3 May 2025 01:35:18 +0000 (18:35 -0700)]
selftests: drv: net: add version indicator
Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir [Sat, 3 May 2025 01:35:17 +0000 (18:35 -0700)]
selftests: drv: net: avoid skipping tests
On a system with either of the ipv4 or ipv6 information missing, tests
are currently skipped. Ideally, the test should run as long as at least
one address family is present. This patch make test run whenever
possible.
Before:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default
ok 2 ping.test_xdp_generic_sb
ok 3 ping.test_xdp_generic_mb
ok 4 ping.test_xdp_native_sb
ok 5 ping.test_xdp_native_mb
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:1 error:0
Mohsin Bashir [Sat, 3 May 2025 01:35:16 +0000 (18:35 -0700)]
selftests: drv: net: fix test failure on ipv6 sys
The `get_interface_info` call has ip version hard-coded which leads to
failures on an IPV6 system. The NetDrvEnv class already gathers
information about remote interface, so instead of fixing the local
implementation switch to using cfg.remote_ifname.
Before:
./drivers/net/ping.py
Traceback (most recent call last):
File "/new_tests/./drivers/net/ping.py", line 217, in <module>
main()
File "/new_tests/./drivers/net/ping.py", line 204, in main
get_interface_info(cfg)
File "/new_tests/./drivers/net/ping.py", line 128, in get_interface_info
raise KsftFailEx('Can not get remote interface')
net.lib.py.ksft.KsftFailEx: Can not get remote interface
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250503013518.1722913-2-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reintroduce the IPv6 link-local address generation fix for GRE and its
kernel selftest. These patches were introduced by merge commit b3fc5927de4b ("Merge branch
'gre-fix-regressions-in-ipv6-link-local-address-generation'") but have
been reverted by commit 8417db0be5bb ("Merge branch
'gre-revert-ipv6-link-local-address-fix'"), because it uncovered
another bug in multipath routing. Now that this bug has been
investigated and fixed, we can apply the GRE link-local address fix
and its kernel selftest again.
For convenience, here's the original cover letter:
IPv6 link-local address generation has some special cases for GRE
devices. This has led to several regressions in the past, and some of
them are still not fixed. This series fixes the remaining problems,
like the ipv6.conf.<dev>.addr_gen_mode sysctl being ignored and the
router discovery process not being started (see details in patch 1).
To avoid any further regressions, patch 2 adds selftests covering
IPv4 and IPv6 gre/gretap devices with all combinations of currently
supported addr_gen_mode values.
====================
Guillaume Nault [Fri, 2 May 2025 22:57:59 +0000 (00:57 +0200)]
selftests: Add IPv6 link-local address generation tests for GRE devices.
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Note: This patch was originally applied as commit 6f50175ccad4 ("selftests:
Add IPv6 link-local address generation tests for GRE devices.").
However, it was then reverted by commit 355d940f4d5a ("Revert "selftests:
Add IPv6 link-local address generation tests for GRE devices."")
because the commit it depended on was going to be reverted. Now that
the situation is resolved, we can add this selftest again (no changes
since original patch, appart from context update in
tools/testing/selftests/net/Makefile). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/2c3a5733cb3a6e3119504361a9b9f89fda570a2d.1746225214.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Fri, 2 May 2025 22:57:52 +0000 (00:57 +0200)]
gre: Fix again IPv6 link-local address generation.
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460ca ("ip/ip6_gre:
use the same logic as SIT interfaces when computing v6LL address")
restricted this use to gretap and ip6gretap devices, and created
add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be10 ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Note:
This patch was originally applied as commit 183185a18ff9 ("gre: Fix
IPv6 link-local address generation."). However, it was then reverted
by commit fc486c2d060f ("Revert "gre: Fix IPv6 link-local address
generation."") because it uncovered another bug that ended up
breaking net/forwarding/ip6gre_custom_multipath_hash.sh. That other
bug has now been fixed by commit 4d0ab3a6885e ("ipv6: Start path
selection from the first nexthop"). Therefore we can now revive this
GRE patch (no changes since original commit 183185a18ff9 ("gre: Fix
IPv6 link-local address generation.").
Andrew Lunn [Wed, 30 Apr 2025 16:21:35 +0000 (11:21 -0500)]
dt-bindings: net: ethernet-controller: Add informative text about RGMII delays
Device Tree and Ethernet MAC driver writers often misunderstand RGMII
delays. Rewrite the Normative section in terms of the PCB, is the PCB
adding the 2ns delay. This meaning was previous implied by the
definition, but often wrongly interpreted due to the ambiguous wording
and looking at the definition from the wrong perspective. The new
definition concentrates clearly on the hardware, and should be less
ambiguous.
Add an Informative section to the end of the binding describing in
detail what the four RGMII delays mean. This expands on just the PCB
meaning, adding in the implications for the MAC and PHY.
Additionally, when the MAC or PHY needs to add a delay, which is
software configuration, describe how Linux does this, in the hope of
reducing errors. Make it clear other users of device tree binding may
implement the software configuration in other ways while still
conforming to the binding.
Jakub Kicinski [Wed, 30 Apr 2025 16:37:58 +0000 (09:37 -0700)]
virtio-net: don't re-enable refill work too early when NAPI is disabled
Commit 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx")
fixed a deadlock between reconfig paths and refill work trying to disable
the same NAPI instance. The refill work can't run in parallel with reconfig
because trying to double-disable a NAPI instance causes a stall under the
instance lock, which the reconfig path needs to re-enable the NAPI and
therefore unblock the stalled thread.
There are two cases where we re-enable refill too early. One is in the
virtnet_set_queues() handler. We call it when installing XDP:
We want the work to be disabled until we call virtnet_rx_resume_all(),
but virtnet_set_queues() kicks it before NAPIs were re-enabled.
The other case is a more trivial case of mis-ordering in
__virtnet_rx_resume() found by code inspection.
Taking the spin lock in virtnet_set_queues() (requested during review)
may be unnecessary as we are under rtnl_lock and so are all paths writing
to ->refill_enabled.
Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com> Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Link: https://patch.msgid.link/20250430163758.3029367-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net_sched: fix a regression in sch_htb
This patchset contains a fix for the regression reported by Alan and a
selftest to cover that case. Please see each patch description for more
details.
====================
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer.
This series is the first part of two series for the Vertexcom driver.
It contains substantial fixes for the RX handling of the Vertexcom MSE102x.
====================
Stefan Wahren [Wed, 30 Apr 2025 13:30:43 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Fix RX error handling
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren [Wed, 30 Apr 2025 13:30:42 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Add range check for CMD_RTS
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren [Wed, 30 Apr 2025 13:30:40 +0000 (15:30 +0200)]
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Lan [Wed, 30 Apr 2025 09:30:51 +0000 (17:30 +0800)]
net: hns3: fixed debugfs tm_qset size
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonglong Liu [Wed, 30 Apr 2025 09:30:50 +0000 (17:30 +0800)]
net: hns3: fix an interrupt residual problem
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 1 May 2025 14:17:15 +0000 (07:17 -0700)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc)
For idpf:
Michal fixes error path handling to remove memory leak.
Larysa prevents reset from being called during shutdown.
For igc:
Jake adjusts locking order to resolve sleeping in atomic context.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix lock order in igc_ptp_reset
idpf: protect shutdown from reset
idpf: fix potential memory leak on kcalloc() failure
====================
octeon_ep: Fix host hang issue during device reboot
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: fec: ERR007885 Workaround for conventional TX
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up") Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
kbuild: Properly disable -Wunterminated-string-initialization for clang
Clang and GCC have different behaviors around disabling warnings
included in -Wall and -Wextra and the order in which flags are
specified, which is exposed by clang's new support for
-Wunterminated-string-initialization.
$ clang -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ clang -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ clang -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
Move -Wextra up right below -Wall in Makefile.extrawarn to ensure these
flags are at the beginning of the warning options list. Move the couple
of warning options that have been added to the main Makefile since
commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn") to scripts/Makefile.extrawarn after -Wall /
-Wextra to ensure they get properly disabled for all compilers.
Merge tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential inode leak in iget() after memory allocation failure
- in subpage mode, fix extent buffer bitmap iteration when writing out
dirty sectors
- fix range calculation when falling back to COW for a NOCOW file
* tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: adjust subpage bit start based on sectorsize
btrfs: fix the inode leak in btrfs_iget()
btrfs: fix COW handling in run_delalloc_nocow()
David S. Miller [Wed, 30 Apr 2025 12:03:22 +0000 (13:03 +0100)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Misc. bug fixes
This series fixes a bug in the driver initialization path, MSIX
setup sequencing issue in the FW error and AER paths, a missing
skb_mark_for_recycle() in the VLAN error path, some ethtool coredump
fixes, an ethtool selftest fix, and an ethtool register dump byte order
fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 28 Apr 2025 22:59:03 +0000 (15:59 -0700)]
bnxt_en: Fix ethtool -d byte order for 32-bit values
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'") Reviewed-by: Shruti Parab <shruti.parab@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Fix coredump logic to free allocated buffer
When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path. In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.
Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reported-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
This patch is similar to the last patch to delay the
pci_alloc_irq_vectors() call in the AER path until after calling
bnxt_reserve_rings(). bnxt_reserve_rings() needs to properly map
the MSIX table first before we call pci_alloc_irq_vectors() which
may immediately write to the MSIX table in some architectures.
Move the bnxt_init_int_mode() call from bnxt_io_slot_reset() to
bnxt_io_resume() after calling bnxt_reserve_rings().
With this change, the AER path may call bnxt_open() ->
bnxt_hwrm_if_change() with bp->irq_tbl set to NULL. bp->irq_tbl is
cleared when we call bnxt_clear_int_mode() in bnxt_io_slot_reset().
So we cannot use !bp->irq_tbl to detect aborted FW reset. Add a
new BNXT_FW_RESET_STATE_ABORT to detect aborted FW reset in
bnxt_hwrm_if_change().
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
On some architectures (e.g. ARM), calling pci_alloc_irq_vectors()
will immediately cause the MSIX table to be written. This will not
work if we haven't called bnxt_reserve_rings() to properly map
the MSIX table to the MSIX vectors reserved by FW.
Fix the FW error recovery path to delay the bnxt_init_int_mode() ->
pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change().
bnxt_request_irq() later in the code path will call it and by then the
MSIX table is properly mapped.
Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid,
the SKB is freed but we're missing the call to recycle it. This
may cause the warning:
"page_pool_release_retry() stalled pool shutdown"
Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Mon, 28 Apr 2025 22:58:57 +0000 (15:58 -0700)]
bnxt_en: Fix ethtool selftest output in one of the failure cases
When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.
Fix it by clearing the buffer before returning.
Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Fix error handling path in bnxt_init_chip()
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.
WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230
The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled. But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work.
Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown") Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'v6.15-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression in scompress"
* tag 'v6.15-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: scompress - increment scomp_scratch_users when already allocated
Felix Fietkau [Sat, 26 Apr 2025 15:32:09 +0000 (17:32 +0200)]
net: ipv6: fix UDPv6 GSO segmentation with NAT
If any address or port is changed, update it in all packets and recalculate
checksum.
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250426153210.14044-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Fix Felix DSA taprio gates after clock jump
Richie Pearn presented a reproducible situation where traffic would get
blocked on the NXP LS1028A switch if a certain taprio schedule was
applied, and stepping the PTP clock would take place. The latter event
is an expected initial occurrence, but also at runtime, for example when
transitioning from one grandmaster to another.
The issue is completely described in patch 1/4, which also contains
the fix, but it has left me with some doubts regarding the need for
vsc9959_tas_clock_adjust() in general.
In order to prove to myself that vsc9959_tas_clock_adjust() is needed in
general, I have written a selftest for the tc-taprio data path in patch
4/4. On the LS1028A, we can clearly see the following failures without
that function:
INFO: Forcing a backward clock jump
TEST: ping [FAIL]
INFO: Setting up taprio after PTP
TEST: In band with gate [FAIL]
Reception of 100 packets failed
TEST: Out of band with gate [FAIL]
Reception of 100 packets failed
As for testing my fix from patch 1/4, that was quite a bit more complex
to do automatically. In fact, I couldn't find any other schedule that
would fail to be updated by vsc9959_tas_clock_adjust() as cleanly as
the schedule from Richie, so I've added that specific schedule as the
test_clock_jump_backward() test.
The test ordering is also (unfortunately) very strategic. Running the
selftest to the end dirties the GCL RAM, and when running
test_clock_jump_backward() once again, the GCL entries won't be all
zeroes as they were the first time around. They will contain bits and
pieces of old schedules, making it very challenging to make it fail.
Thus, test_clock_jump_backward() is the first in the test suite, and
without patch 1/4, it is only supposed to fail the _first_ time when
running after a clean boot.
====================
Vladimir Oltean [Sat, 26 Apr 2025 14:48:58 +0000 (17:48 +0300)]
selftests: net: tc_taprio: new test
Add a forwarding path test for tc-taprio, based on isochron. This is
specifically intended for NICs with an offloaded data path (switchdev/DSA)
and requires taprio 'flags 2'. Also, $h1 and $h2 must support hardware
timestamping, and $h1 tc-etf offload, for isochron to work.
Packets received by a switch while the egress port has a taprio schedule
with an open gate for the traffic class must be sent right away.
Packets received by the switch while the traffic class gate must be
delayed until it opens.
Packets received by the switch must be dropped if the gate for the
traffic class never opens.
Packets should pass if the maximum SDU for the traffic class allows it,
and should be dropped otherwise.
The schedule should auto-update itself if clock jumps take place while
taprio is installed. Repeat most of the above tests after forcing two
clock jumps, one backwards (in Jan 1970) and one back into the present.
Symlink it from tools/testing/selftests/drivers/net/dsa, because usually
DSA ports have the same MAC address, and we need STABLE_MAC_ADDRS=yes
from its forwarding.config for the test to run successfully.
Vladimir Oltean [Sat, 26 Apr 2025 14:48:57 +0000 (17:48 +0300)]
selftests: net: tsn_lib: add window_size argument to isochron_do()
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Vladimir Oltean [Sat, 26 Apr 2025 14:48:55 +0000 (17:48 +0300)]
net: dsa: felix: fix broken taprio gate states after clock jump
Simplest setup to reproduce the issue: connect 2 ports of the
LS1028A-RDB together (eno0 with swp0) and run:
$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
sched-entry S 20 300000 sched-entry S 48 200000 \
sched-entry S 20 300000 sched-entry S 83 200000 \
sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m
One will observe that the PTP state machine on swp0 starts
synchronizing, then it attempts to do a clock step, and after that, it
never fails to recover from the condition below.
ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay 818 +/- 0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp
A hint is given by the non-zero statistics for dropped packets which
were expecting hardware TX timestamps:
We know that when PTP clock stepping takes place (from ocelot_ptp_settime64()
or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.
Another interesting hint is that placing an early return in
vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the
issue and TX timestamps are no longer dropped.
The debugging function written by me and included below is intended to
read the GCL RAM, after the admin schedule became operational, through
the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.
static void vsc9959_print_tas_gcl(struct ocelot *ocelot)
{
u32 val, list_length, interval, gate_state;
int i, err;
err = read_poll_timeout(ocelot_read, val,
!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
if (err) {
dev_err(ocelot->dev,
"Failed to wait for TAS config pending bit to clear: %pe\n",
ERR_PTR(err));
return;
}
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);
for (i = 0; i < list_length; i++) {
ocelot_rmw(ocelot,
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
QSYS_GCL_STATUS_REG_1);
interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);
dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
i, gate_state, interval);
}
}
Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
performed by vsc9959_qos_port_tas_set(), and after the one done by
vsc9959_tas_clock_adjust(), I notice the following difference.
From the tc-taprio process context, where the schedule was initially
configured, the GCL looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000
mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000
mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000
mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000
But from the ptp4l clock stepping process context, when the
vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the
operational schedule now looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0
I do not have a formal explanation, just experimental conclusions.
It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
for a port's TAS, the GCL entry RAM is updated anyway, despite what the
documentation claims: "Specify the time interval in
QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM
write with the gate state and the time interval for the entry number
specified". We don't touch that register (through vsc9959_tas_gcl_set())
from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.
It seems to be updated with effectively stale memory, which in my
testing can hold a variety of things, including even pieces of the
previously applied schedule, for particular schedule lengths.
As such, in most circumstances it is very difficult to pinpoint this
issue, because the newly updated schedule would "behave strangely",
but ultimately might still pass traffic to some extent, due to some
gate entries still being present in the stale GCL entry RAM. It is easy
to miss.
With the particular schedule given at the beginning, the GCL RAM
"happens" to be reproducibly rewritten with all zeroes, and this is
consistent with what we see: when the time-aware shaper has gate entries
with all gates closed, traffic is dropped on TX, no wonder we can't
retrieve TX timestamps.
Rewriting the GCL entry RAM when reapplying the new base time fixes the
observed issue.
Fixes: 8670dc33f48b ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250426144859.3128352-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chad Monroe [Sun, 27 Apr 2025 01:05:44 +0000 (02:05 +0100)]
net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Jacob Keller [Tue, 22 Apr 2025 21:03:09 +0000 (14:03 -0700)]
igc: fix lock order in igc_ptp_reset
Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM
transactions") added a new mutex to protect concurrent PTM transactions.
This lock is acquired in igc_ptp_reset() in order to ensure the PTM
registers are properly disabled after a device reset.
The flow where the lock is acquired already holds a spinlock, so acquiring
a mutex leads to a sleep-while-locking bug, reported both by smatch,
and the kernel test robot.
The critical section in igc_ptp_reset() does correctly use the
readx_poll_timeout_atomic variants, but the standard PTM flow uses regular
sleeping variants. This makes converting the mutex to a spinlock a bit
tricky.
Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first,
and then the tmreg_lock spinlock. This is safe because there is no other
ordering dependency on these locks, as this is the only place where both
locks were acquired simultaneously. Indeed, any other flow acquiring locks
in that order would be wrong regardless.
Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).
When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.
Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.
Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Da Xue [Fri, 25 Apr 2025 19:20:09 +0000 (15:20 -0400)]
net: mdio: mux-meson-gxl: set reversed bit when using internal phy
This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.
Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.
The vendor SDK sets this bit along with the PHY_ID bits.
Simon Horman [Fri, 25 Apr 2025 15:50:47 +0000 (16:50 +0100)]
net: dlink: Correct endianness handling of led_mode
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Merge tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"A fix for the recently merged mount notification support"
* tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
selftests/fs/mount-notify: test also remove/flush of mntns marks
fanotify: fix flush of mntns marks
Merge tag 'platform-drivers-x86-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes and new HW support
- amd/pmc: Require at least 2.5 seconds between HW sleep cycles
- alienware-wmi-wmax:
- Add support for Alienware m15 R7
- Fix error handling to avoid uninitialized variable
- asus-wmi: Disable OOBE state also on resume
- ideapad-laptop: Support a few new buttons
- intel/hid: Add Panther Lake support
- intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug"
* tag 'platform-drivers-x86-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: add support for some new buttons
platform/x86: asus-wmi: Disable OOBE state after resume from hibernation
platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7
platform/x86/intel: hid: Add Pantherlake support
platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad error handling
platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug
platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles
Merge tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fixes for nid setting in memmap_init_reserved_pages():
- pass 'size' rather than 'end' to memblock_set_node() as that
function expects
- fix a corner case when memblock.reserved is doubled at
memmap_init_reserved_pages() and the newly reserved block
won't have nid assigned"
* tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: add test for memblock_set_node
mm/memblock: repeat setting reserved region nid if array is doubled
mm/memblock: pass size instead of end to memblock_set_node()
Merge tag 'v6.15-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix three potential use after frees: in session logoff, in krb5 auth,
and in RPC open
- Fix missing rc check in session setup authentication
* tag 'v6.15-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix use-after-free in session logoff
ksmbd: fix use-after-free in kerberos authentication
ksmbd: fix use-after-free in ksmbd_session_rpc_open
smb: server: smb2pdu: check return value of xa_store()
idpf: fix offloads support for encapsulated packets
Split offloads into csum, tso and other offloads so that tunneled
packets do not by default have all the offloads enabled.
Stateless offloads for encapsulated packets are not yet supported in
firmware/software but in the driver we were setting the features same as
non encapsulated features.
Fixed naming to clarify CSUM bits are being checked for Tx.
Inherit netdev features to VLAN interfaces as well.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Zachary Goldstein <zachmgoldstein@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo [Fri, 25 Apr 2025 22:26:32 +0000 (15:26 -0700)]
ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()
As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI
pointer values"), we need to perform a null pointer check on the return
value of ice_get_vf_vsi() before using it.
Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters") Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Greenwalt [Fri, 25 Apr 2025 22:26:31 +0000 (15:26 -0700)]
ice: fix Get Tx Topology AQ command error on E830
The Get Tx Topology AQ command (opcode 0x0418) has different read flag
requirements depending on the hardware/firmware. For E810, E822, and E823
firmware the read flag must be set, and for newer hardware (E825 and E830)
it must not be set.
This results in failure to configure Tx topology and the following warning
message during probe:
DDP package does not support Tx scheduling layers switching feature -
please update to the latest DDP package and try again
The current implementation only handles E825-C but not E830. It is
confusing as we first check ice_is_e825c() and then set the flag in the set
case. Finally, we check ice_is_e825c() again and set the flag for all other
hardware in both the set and get case.
Instead, notice that we always need the read flag for set, but only need
the read flag for get on E810, E822, and E823 firmware. Fix the logic to
check the MAC type and set the read flag in get only on the older devices
which require it.
Fixes: ba1124f58afd ("ice: Add E830 device IDs, MAC type and registers") Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net_sched: Adapt qdiscs for reentrant enqueue cases
As described in Gerrard's report [1], there are cases where netem can
make the qdisc enqueue callback reentrant. Some qdiscs (drr, hfsc, ets,
qfq) break whenever the enqueue callback has reentrant behaviour.
This series addresses these issues by adding extra checks that cater for
these reentrant corner cases. This series has passed all relevant test
cases in the TDC suite.
Victor Nogueira [Fri, 25 Apr 2025 22:07:09 +0000 (19:07 -0300)]
selftests: tc-testing: Add TDC tests that exercise reentrant enqueue behaviour
Add 5 TDC tests that exercise the reentrant enqueue behaviour in drr,
ets, qfq, and hfsc:
- Test DRR's enqueue reentrant behaviour with netem (which caused a
double list add)
- Test ETS's enqueue reentrant behaviour with netem (which caused a double
list add)
- Test QFQ's enqueue reentrant behaviour with netem (which caused a double
list add)
- Test HFSC's enqueue reentrant behaviour with netem (which caused a UAF)
- Test nested DRR's enqueue reentrant behaviour with netem (which caused a
double list add)
Victor Nogueira [Fri, 25 Apr 2025 22:07:08 +0000 (19:07 -0300)]
net_sched: qfq: Fix double list add in class with netem as child qdisc
As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of qfq, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.
This patch checks whether the class was already added to the agg->active
list (cl_is_active) before doing the addition to cater for the reentrant
case.
Victor Nogueira [Fri, 25 Apr 2025 22:07:07 +0000 (19:07 -0300)]
net_sched: ets: Fix double list add in class with netem as child qdisc
As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of ets, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.
In addition to checking for qlen being zero, this patch checks whether
the class was already added to the active_list (cl_is_active) before
doing the addition to cater for the reentrant case.
Victor Nogueira [Fri, 25 Apr 2025 22:07:06 +0000 (19:07 -0300)]
net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc
As described in Gerrard's report [1], we have a UAF case when an hfsc class
has a netem child qdisc. The crux of the issue is that hfsc is assuming
that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted
the class in the vttree or eltree (which is not true for the netem
duplicate case).
This patch checks the n_active class variable to make sure that the code
won't insert the class in the vttree or eltree twice, catering for the
reentrant case.
Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-3-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Fri, 25 Apr 2025 22:07:05 +0000 (19:07 -0300)]
net_sched: drr: Fix double list add in class with netem as child qdisc
As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of drr, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.
In addition to checking for qlen being zero, this patch checks whether the
class was already added to the active_list (cl_is_active) before adding
to the list to cover for the reentrant case.
The actual device uninit usually happens on a separate thread
scheduled after this code runs, but there is no guarantee of order
of thread execution, so this could be a problem. There's no
actual need to clear the client_id at this point, so simply
remove the offending code.
Fixes: 10659034c622 ("pds_core: add the aux client API") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 28 Apr 2025 22:51:44 +0000 (15:51 -0700)]
Merge tag 'for-net-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtksdio: Check function enabled before doing close
- btmtksdio: Do close if SDIO card removed without close
- btusb: avoid NULL pointer dereference in skb_dequeue()
- btintel_pcie: Avoid redundant buffer allocation
- btintel_pcie: Add additional to checks to clear TX/RX paths
- hci_conn: Fix not setting conn_timeout for Broadcast Receiver
- hci_conn: Fix not setting timeout for BIG Create Sync
* tag 'for-net-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: copy RX timestamp to new fragments
Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths
Bluetooth: btmtksdio: Do close if SDIO card removed without close
Bluetooth: btmtksdio: Check function enabled before doing close
Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()
Bluetooth: btintel_pcie: Avoid redundant buffer allocation
Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync
Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver
====================
netlink: specs: ethtool: Remove UAPI duplication of phy-upstream enum
The phy-upstream enum is already defined in the ethtool.h UAPI header
and used by the ethtool userspace tool. However, the ethtool spec does
not reference it, causing YNL to auto-generate a duplicate and redundant
enum.
Fix this by updating the spec to reference the existing UAPI enum
in ethtool.h.
When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.
Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.
amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload
According to the XGMAC specification, enabling features such as Layer 3
and Layer 4 Packet Filtering, Split Header and Virtualized Network support
automatically selects the IPC Full Checksum Offload Engine on the receive
side.
When RX checksum offload is disabled, these dependent features must also
be disabled to prevent abnormal behavior caused by mismatched feature
dependencies.
Ensure that toggling RX checksum offload (disabling or enabling) properly
disables or enables all dependent features, maintaining consistent and
expected behavior in the network device.
Cc: stable@vger.kernel.org Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities") Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'for-6.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- always update the array size in realloc_argv on success
- dm-integrity: fix a warning on invalid table line
- dm-bufio: don't schedule in atomic context
- Fix W=1 build with clang
* tag 'for-6.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always update the array size in realloc_argv on success
dm-integrity: fix a warning on invalid table line
dm-bufio: don't schedule in atomic context
dm table: Fix W=1 build warning when mempool_needs_integrity is unused
Merge tag 'powerpc-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- fix to handle patchable function entries during module load
- fix to align vmemmap start to page size
- fixes to handle compilation errors and warnings
Thanks to Anthony Iliopoulos, Donet Tom, Ritesh Harjani (IBM), Venkat
Rao Bagalkote, and Stephen Rothwell.
* tag 'powerpc-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/boot: Fix dash warning
powerpc/boot: Check for ld-option support
powerpc: Add check to select PPC_RADIX_BROADCAST_TLBIE
powerpc64/ftrace: fix module loading without patchable function entries
book3s64/radix : Align section vmemmap start address to PAGE_SIZE
book3s64/radix: Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n
Merge tag 'hyperv-fixes-signed-20250427' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Bug fixes for the Hyper-V driver and kvp_daemon
* tag 'hyperv-fixes-signed-20250427' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Fix bad ref to hv_synic_eventring_tail when CPU goes offline
tools/hv: update route parsing in kvp daemon
Drivers: hv: Fix bad pointer dereference in hv_get_partition_id
dm: always update the array size in realloc_argv on success
realloc_argv() was only updating the array size if it was called with
old_argv already allocated. The first time it was called to create an
argv array, it would allocate the array but return the array size as
zero. dm_split_args() would think that it couldn't store any arguments
in the array and would call realloc_argv() again, causing it to
reallocate the initial slots (this time using GPF_KERNEL) and finally
return a size. Aside from being wasteful, this could cause deadlocks on
targets that need to process messages without starting new IO. Instead,
realloc_argv should always update the allocated array size on success.
Fixes: a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Merge tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
Merge tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Revert a v6.15 patch due to a report of SELinux test failures
* tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
Merge tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
Merge tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix sporadic crashes in dequeue_entities() due to ... bad math.
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting of
complex math being correct it could have de-escalated a crash into
a warning, but that's for a different patch ]"
* tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
Merge tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
Merge tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Add a missing Kconfig option, fix some bugs in exception handlers,
memory management and KVM"
* tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finally
LoongArch: KVM: Fully clear some CSRs when VM reboot
LoongArch: KVM: Fix multiple typos of KVM code
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch: Remove a bogus reference to ZONE_DMA
LoongArch: Handle fp, lsx, lasx and lbt assembly symbols
LoongArch: Make do_xyz() exception handlers more robust
LoongArch: Make regs_irqs_disabled() more clear
LoongArch: Select ARCH_USE_MEMTEST
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
- Support for cacheinfo API to expose OpenRISC cache info via sysfs,
this also translated to some cleanups to OpenRISC cache flush and
invalidate API's
- Documentation updates for new mailing list and toolchain binaries
* tag 'for-linus' of https://github.com/openrisc/linux:
Documentation: openrisc: Update toolchain binaries URL
Documentation: openrisc: Update mailing list
openrisc: Add cacheinfo support
openrisc: Introduce new utility functions to flush and invalidate caches
openrisc: Refactor struct cpuinfo_or1k to reduce duplication
Chuck Lever [Thu, 24 Apr 2025 13:27:35 +0000 (09:27 -0400)]
Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
Ondrej reports that certain SELinux tests are failing after commit fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Merge tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kunit fix from Kees Cook:
"A single fix for the kunit lib/tests/ relocation:
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)"
* tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Ensure prime numbers tests are included in KUnit test runs
Merge tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a
couple of minor fixes, seems a bit quiet, but probably some lag from
Easter holidays.
exynos:
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module
- marks struct decon_data as const in the exynos7_drm_decon driver
since it is only read
- Remove unnecessary checking in exynos_drm_drv.c module
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity"
* tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"
drm/exynos: exynos7_drm_decon: Consstify struct decon_data
drm/exynos: fixed a spelling error
drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()
drm/exynos: Remove unnecessary checking
drm/amd/display: do not copy invalid CRTC timing info
drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks
drm/amd/display: Fix ACPI edid parsing on some Lenovo systems
drm/amdgpu: Allow P2P access through XGMI
drm/amd/display: Enable urgent latency adjustment on DCN35
drm/amd/display: Force full update in gpu reset
drm/amd/display: Fix gpu reset in multidisplay config
drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY
drm/amdgpu: Use allowed_domains for pinning dmabufs
drm: panel: jd9365da: fix reset signal polarity in unprepare
drm/meson: use unsigned long long / Hz for frequency types
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support") Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
====================
net: ethernet: mtk-star-emac: fix several issues on rx/tx poll
This patchset fixes two issues with the mtk-star-emac driver.
The first patch fixes spin lock recursion issues I've observed on the
Mediatek Genio 350-EVK board using this driver when the Ethernet
functionality is enabled on the board (requires a correct jumper and
DIP switch configuration, as well as enabling the device in the
devicetree).
The issues can be easily reproduced with apt install or ssh commands
especially and with the CONFIG_DEBUG_SPINLOCK parameter, when
one occurs, there is backtrace similar to this:
```
BUG: spinlock recursion on CPU#0, swapper/0/0
lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0,
.owner_cpu: 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT
Hardware name: MediaTek MT8365 Open Platform EVK (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x60/0x80
dump_stack+0x18/0x24
spin_dump+0x78/0x88
do_raw_spin_lock+0x11c/0x120
_raw_spin_lock+0x20/0x2c
mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac]
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x4c/0xb0
handle_fasteoi_irq+0xa0/0x1bc
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x120
do_interrupt_handler+0x50/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
regmap_mmio_read32le+0xc/0x20 (P)
_regmap_bus_reg_read+0x6c/0xac
_regmap_read+0x60/0xdc
regmap_read+0x4c/0x80
mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac]
__napi_poll+0x38/0x188
net_rx_action+0x164/0x2c0
handle_softirqs+0x100/0x244
__do_softirq+0x14/0x20
____do_softirq+0x10/0x20
call_on_irq_stack+0x24/0x64
do_softirq_own_stack+0x1c/0x40
__irq_exit_rcu+0xd4/0x10c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
cpuidle_enter_state+0xac/0x320 (P)
cpuidle_enter+0x38/0x50
do_idle+0x1e4/0x260
cpu_startup_entry+0x34/0x3c
rest_init+0xdc/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
```
The second patch is a cleanup patch to fix a inconsistency in the
mtk_star_rx_poll function between the napi_complete_done api usage and
its description in documentation.
I've tested this patchset on Mediatek Genio 350-EVK board with a kernel
based on linux-next (tag: next-20250422).
projects / thirdparty / linux.git / log
