No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running") Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge patch series "usb: gadget: Refactor function drivers to use __free() cleanup"
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
usb: gadget: f_rndis: Refactor bind path to use __free()
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_ecm: Refactor bind path to use __free()
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_acm: Refactor bind path to use __free()
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_ncm: Refactor bind path to use __free()
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: Store endpoint pointer in usb_request
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST).
The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification
Revision 1.0.
- Supports 1 downstream USB receptacles
- Number of SSP Gen2 or SS ports: 1
- Number of HS or FS or LS ports: 1
- Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps),
High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps).
- Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and
these split-transactions.
- Supports Power Control and Over Current Detection.
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Stephen Boyd [Tue, 16 Sep 2025 02:16:20 +0000 (10:16 +0800)]
usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n
Ease driver development by adding stubs for the typec_switch APIs when
CONFIG_TYPEC=n. Copy the same method used for the typec_mux APIs to be
consistent.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250916021620.1303995-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: mon: Increase BUFF_MAX to 64 MiB to support multi-MB URBs
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
usb: xhci: plat: Facilitate using autosuspend for xhci plat devices
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Merge patch series "Add SpacemiT K1 USB3.0 host controller support"
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Ze Huang [Fri, 12 Sep 2025 16:53:48 +0000 (00:53 +0800)]
usb: dwc3: add generic driver to support flattened
To support flattened dwc3 dt model and drop the glue layer, introduce the
`dwc3-generic` driver. This enables direct binding of the DWC3 core driver
and offers an alternative to the existing glue driver `dwc3-of-simple`.
Ze Huang [Fri, 12 Sep 2025 16:53:47 +0000 (00:53 +0800)]
dt-bindings: usb: dwc3: add support for SpacemiT K1
Add support for the USB 3.0 Dual-Role Device (DRD) controller embedded
in the SpacemiT K1 SoC. The controller is based on the Synopsys
DesignWare Core USB 3 (DWC3) IP, supporting USB3.0 host mode and USB 2.0
DRD mode.
Merge tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
Merge tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
Merge tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
Merge tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
Hector Martin [Sun, 14 Sep 2025 12:56:16 +0000 (12:56 +0000)]
usb: typec: tipd: Handle mode transitions for CD321x
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.
Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.
To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Co-developed-by: Sven Peter <sven@kernel.org> Signed-off-by: Sven Peter <sven@kernel.org> Reviewed-by: Janne Grunau <j@jannau.net> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:15 +0000 (12:56 +0000)]
usb: typec: tipd: Read data status in probe and cache its value
Just like for power status we also need to keep track of data status to
be able to detect mode changes once we introduce de-bouncing for CD321x.
Read it during probe and keep a cached copy of its value.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:14 +0000 (12:56 +0000)]
usb: typec: tipd: Use read_power_status function in probe
We need the initial power status to be able to reliably detect connector
changes once we introduce de-bouncing for CD321x next. read_power_status
takes care of this and also forwards the status to the trace subsystem
so let's use that instead of open-coding it inside probe.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:13 +0000 (12:56 +0000)]
usb: typec: tipd: Update partner identity when power status was updated
Whenever the power status is changed make sure to also update the
partner identity to be able to detect changes once de-bouncing and mode
changes are added for CD321x.
Sven Peter [Sun, 14 Sep 2025 12:56:12 +0000 (12:56 +0000)]
usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x
Ports equipped with a CD321x are only found on Apple Silicon machines
and always support DisplayPort, Thunderbolt and USB4. Register these
port modes unconditionally.
Sven Peter [Sun, 14 Sep 2025 12:56:11 +0000 (12:56 +0000)]
usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Sven Peter [Sun, 14 Sep 2025 12:56:10 +0000 (12:56 +0000)]
usb: typec: tipd: Add cd321x struct with separate size
We're about to add more fields to struct tps6598x which are only relevant
for Apple's CD321x and to ensure that we don't waste memory everywhere for
those add a separate struct for cd321x and prepare to allocate more space
inside probe.
Sven Peter [Sun, 14 Sep 2025 12:56:09 +0000 (12:56 +0000)]
usb: typec: tipd: Trace data status for CD321x correctly
Some bits inside the CD321x TPS_DATA_STATUS register have a different
function compared to the original tipd chip. Add these and introduce a
separate trace function to show them correctly.
Sven Peter [Sun, 14 Sep 2025 12:56:08 +0000 (12:56 +0000)]
usb: typec: tipd: Move switch_power_state to tipd_data
When support for CD321x was originally added no other hardware variant
was supported and there was no need for struct tipd_data. Now that it
exists move the special case in there so that we can drop the
of_device_is_compatible_check entirely.
Sven Peter [Sun, 14 Sep 2025 12:56:06 +0000 (12:56 +0000)]
usb: typec: tipd: Clear interrupts first
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X") Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'erofs-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix long xattr name prefix placement
erofs: fix runtime warning on truncate_folio_batch_exceptionals()
erofs: fix invalid algorithm for encoded extents
Merge tag 'ceph-for-6.17-rc6' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a race condition around r_parent tracking that took a long
time to track down from Alex and some fixes for potential crashes on
accessing invalid memory from Max and myself.
All marked for stable"
* tag 'ceph-for-6.17-rc6' of https://github.com/ceph/ceph-client:
libceph: fix invalid accesses to ceph_connection_v1_info
ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error
ceph: always call ceph_shift_unused_folios_left()
ceph: fix race condition where r_parent becomes stale before sending message
ceph: fix race condition validating r_parent before applying state
Merge tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for sy7636a which got confused about which device to use to
manage the lifecycle of the power good GPIO because it's looked up
from the parent device due to the way DT bindings work"
* tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sy7636a: fix lifecycle of power good gpio
Merge tag 'driver-core-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix UAF in cgroup pressure polling by using kernfs_get_active_of()
to prevent operations on released file descriptors
- Fix unresolved intra-doc link in the documentation of struct Device
when CONFIG_DRM != y
- Update the DMA Rust MAINTAINERS entry
* tag 'driver-core-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Update the DMA Rust entry
kernfs: Fix UAF in polling when open file is released
rust: device: fix unresolved link to drm::Device
Merge tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
Merge tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two smb3 client fixes, both for stable:
- Fix encryption problem with multiple compounded ops
- Fix rename error cases that could lead to data corruption"
* tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix data loss due to broken rename(2)
smb: client: fix compound alignment with encryption
Merge patch series "Support system sleep with offloaded usb transfers" into usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:16 +0000 (14:20 +0000)]
usb: host: enable USB offload during system sleep
Sharing a USB controller with another entity via xhci-sideband driver
creates power management complexities. To prevent the USB controller
from being inadvertently deactivated while in use by the other entity, a
usage-count based mechanism is implemented. This allows the system to
manage power effectively, ensuring the controller remains available
whenever needed.
In order to maintain full functionality of an offloaded USB devices,
several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for
USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked
with needs_remote_wakeup. Namely, skip usb_suspend_interface() and
usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a
pending interrupt urb during system suspend for handling the interrupt
transfer, which is necessary since remote wakeup doesn't apply in the
offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given
that the USB devices is used by another entity, unilaterally flush the
endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the
suspend/resume callbacks in the xhci platform driver.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:15 +0000 (14:20 +0000)]
xhci: sideband: add api to trace sideband usage
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:14 +0000 (14:20 +0000)]
usb: offload: add apis for offload usage tracking
Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:13 +0000 (14:20 +0000)]
usb: xhci-plat: separate dev_pm_ops for each pm_event
Separate dev_pm_ops for different power events such as suspend, thaw,
and hibernation. This is crucial when xhci-plat driver needs to adapt
its behavior based on different power state changes.
Israel Cepeda [Thu, 11 Sep 2025 18:13:43 +0000 (20:13 +0200)]
i2c: Add Intel USBIO I2C driver
Add a a driver for the I2C auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250911181343.77398-4-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Israel Cepeda [Thu, 11 Sep 2025 18:13:42 +0000 (20:13 +0200)]
gpio: Add Intel USBIO GPIO driver
Add a a driver for the GPIO auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Link: https://lore.kernel.org/r/20250911181343.77398-3-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Israel Cepeda [Thu, 11 Sep 2025 18:13:41 +0000 (20:13 +0200)]
usb: misc: Add Intel USBIO bridge driver
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: Implement glue callbacks to facilitate runtime suspend
On Qualcomm DWC3 dual-role controllers, the conndone/disconnect events in
device mode are generated by controller when software writes to QSCRATCH
registers in Qualcomm Glue layer rather than the vbus line being routed to
dwc3 core IP for it to recognize and generate these events.
UTMI_OTG_VBUS_VALID bit of QSCRATCH_HS_PHY_CTRL register needs to be set
to generate a connection done event and to be cleared for the controller to
generate a disconnect event during cable removal. When the disconnect is
not generated upon cable removal, the "connected" flag of dwc3 is left
marked as "true" and it blocks suspend routines and for that to happen upon
cable removal, the cable disconnect notification coming in via set_role
call need to be provided to the Qualcomm glue layer as well.
Currently, the way DWC3 core and Qualcomm legacy glue driver are designed,
there is no mechanism through which the DWC3 core can notify the Qualcomm
glue layer of any role changes which it receives via role switch. To
register these glue callbacks at probe time, for enabling core to notify
glue layer, the legacy Qualcomm driver has no way to find out when the
child driver probe was successful since it does not check for the same
during of_platform_populate.
Hence implement the following glue callbacks for flattened Qualcomm glue
driver:
1. set_role: To pass role switching information from drd layer to glue.
This information is needed to identify NONE/DEVICE mode switch and modify
QSCRATCH to generate connect-done event on device mode entry and disconnect
event on cable removal in device mode.
2. run_stop: When booting up in device mode, if autouspend is enabled and
userspace doesn't write UDC on boot, controller enters autosuspend. After
this, if the userspace writes to UDC in the future, run_stop notifier is
required to enable UTMI_OTG_VBUS_VALID of QSCRATCH so that connect done
event is generated after run_stop(1) is done to finish enumeration.
usb: dwc3: core: Introduce glue callbacks for flattened implementations
In certain situations like role switching, the glue layers need to be
informed of these events, so that they can take any necessary action.
But in non-flattened implementations, the glue drivers have no data on
when the core driver probe was successful post invoking of_platform_
populate. Now that the core driver supports flattened implementations
as well, introduce vendor callbacks that can be passed on from glue to
core before invoking dwc3_core_probe.
Introduce callbacks to notify glue layer of role_switch and run_stop
changes. These can be used by flattened implementation of Qualcomm
glue layer to generate connect/disconnect events in controller during
cable connect and run stop modifications by udc in device mode.
Haotien Hsu [Mon, 11 Aug 2025 07:45:58 +0000 (15:45 +0800)]
usb: xhci: tegra: Support USB wakeup function for Tegra234
When the system is suspended, USB hot-plugging/unplugging can trigger
wake events of the Tegra USB host controller.
Enable support for USB wake-up events by parsing device-tree to see if
the interrupts for the wake-up events are present and if so configure
those interrupts. Note that if wake-up events are not present, still
allow the USB host controller to probe as normal.
usb: dwc2: Add support for 'maximum-speed' property
The DWC2 IP can be properly integrated in a SoC to work at high-speed
USB speed but some board issues, EMC constraints or any other reasons
can lead to the need to limit this USB speed at board level.
The device-tree 'maximum-speed' property already exists for this purpose
but is not handled by the DWC2 driver.
Fill this lack adding support for 'maximum-speed' property and so allow
to limit the USB speed in device-tree (board description).
Xu Yang [Wed, 10 Sep 2025 10:50:42 +0000 (18:50 +0800)]
usb: typec: tcpci: add wakeup support
Add wakeup support for tcpci. If the user enables the wakeup file, call
enable_irq_wake() during system suspend and disable_irq_wake() during
system resume. Since this driver supports shared interrupts, mask the
chip interrupt by default when wakeup is disabled to avoid affecting
other IRQ users.
Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250910105042.695146-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer size of sysfs is fixed at PAGE_SIZE, and the page offset
of the buf parameter of sysfs_emit_at() must be 0, there is no need
to manually manage the buf pointer offset.
Fixes: 711d41ab4a0e ("usb: core: Use sysfs_emit_at() when showing dynamic IDs") Reported-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b6445765657b5855e869 Tested-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://lore.kernel.org/r/tencent_B32D6D8C9450EBFEEE5ACC2C7B0E6C402D0A@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the DMA Rust maintainers entry in the following two aspects:
(1) Change Abdiel's entry to 'Reviewer'.
(2) Take patches through the driver-core tree.
Abdiel won't do any more maintainer work on the DMA (or scatterlist)
infrastructure, but he'd like to be kept in the loop, hence change is
entry to 'R:'.
Analogous to [1], the DMA (and scatterlist) helpers are closely coupled
with the core device infrastructure and the device lifecycle, hence take
patches through the driver-core tree by default.
Currently, xattr name prefixes are forcibly placed into the packed
inode if the fragments feature is enabled, and users have no option
to put them in plain form directly on disk.
This is inflexible. First, as mentioned above, users should be able
to store unwrapped long xattr name prefixes unconditionally
(COMPAT_PLAIN_XATTR_PFX). Second, since we now have the new metabox
inode to store metadata, it should be used when available instead
of the packed inode.
Merge tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
Merge tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- ptep_modify_prot_start() may be called in a loop, which might lead to
the preempt_count overflow due to the unnecessary preemption
disabling. Do not disable preemption to prevent the overflow
- Events of type PERF_TYPE_HARDWARE are not tested for sampling and
return -EOPNOTSUPP eventually.
Instead, deny all sampling events by CPUMF counter facility and
return -ENOENT to allow other PMUs to be tried
- The PAI PMU driver returns -EINVAL if an event out of its range. That
aborts a search for an alternative PMU driver.
Instead, return -ENOENT to allow other PMUs to be tried
* tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: Deny all sampling events by counter PMU
s390/pai: Deny all events not handled by this PMU
s390/mm: Prevent possible preempt_count overflow
Merge tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
Merge tag 'for-6.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix delayed inode tracking in xarray, eviction can race with
insertion and leave behind a disconnected inode
- on systems with large page (64K) and small block size (4K) fix
compression read that can return partially filled folio
- slightly relax compression option format for backward compatibility,
allow to specify level for LZO although there's only one
- fix simple quota accounting of compressed extents
- validate minimum device size in 'device add'
- update maintainers' entry
* tag 'for-6.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't allow adding block device of less than 1 MB
MAINTAINERS: update btrfs entry
btrfs: fix subvolume deletion lockup caused by inodes xarray race
btrfs: fix corruption reading compressed range when block size is smaller than page size
btrfs: accept and ignore compression level for lzo
btrfs: fix squota compressed stats leak
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"A number of fixes accumulated due to summer vacations
- Fix out-of-bounds dynptr write in bpf_crypto_crypt() kfunc which
was misidentified as a security issue (Daniel Borkmann)
- Update the list of BPF selftests maintainers (Eduard Zingerman)
- Fix selftests warnings with icecc compiler (Ilya Leoshkevich)
- Disable XDP/cpumap direct return optimization (Jesper Dangaard
Brouer)
- Fix unexpected get_helper_proto() result in unusual configuration
BPF_SYSCALL=y and BPF_EVENTS=n (Jiri Olsa)
- Allow fallback to interpreter when JIT support is limited (KaFai
Wan)
- Fix rqspinlock and choose trylock fallback for NMI waiters. Pick
the simplest fix. More involved fix is targeted bpf-next (Kumar
Kartikeya Dwivedi)
- Fix cleanup when tcp_bpf_send_verdict() fails to allocate
psock->cork (Kuniyuki Iwashima)
- Disallow bpf_timer in PREEMPT_RT for now. Proper solution is being
discussed for bpf-next. (Leon Hwang)
- Fix XSK cq descriptor production (Maciej Fijalkowski)
- Tell memcg to use allow_spinning=false path in bpf_timer_init() to
avoid lockup in cgroup_file_notify() (Peilin Ye)
- Fix bpf_strnstr() to handle suffix match cases (Rong Tao)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
bpf: Allow fall back to interpreter for programs with stack size <= 512
rqspinlock: Choose trylock fallback for NMI waiters
xsk: Fix immature cq descriptor production
bpf: Update the list of BPF selftests maintainers
selftests/bpf: Add tests for bpf_strnstr
selftests/bpf: Fix "expression result unused" warnings with icecc
bpf: Fix bpf_strnstr() to handle suffix match cases better
selftests/bpf: Extend crypto_sanity selftest with invalid dst buffer
bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt
bpf: Check the helper function is valid in get_helper_proto
bpf, cpumap: Disable page_pool direct xdp_return need larger scope
Paolo Abeni [Thu, 11 Sep 2025 14:33:31 +0000 (16:33 +0200)]
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
This reverts commit 5537a4679403 ("net: usb: asix: ax88772: drop
phylink use in PM to avoid MDIO runtime PM wakeups"), it breaks
operation of asix ethernet usb dongle after system suspend-resume
cycle.
Paolo Abeni [Thu, 11 Sep 2025 10:49:52 +0000 (12:49 +0200)]
Merge tag 'wireless-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes:
- iwlwifi: fix 130/1030 devices
- ath12k: fix alignment, power save
- virt_wifi: fix crash
- cfg80211: disable per-link stats due
to buffer size issues
* tag 'wireless-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: completely disable per-link stats for now
wifi: virt_wifi: Fix page fault on connect
wifi: cfg80211: Fix "no buffer space available" error in nl80211_get_station() for MLO
wifi: iwlwifi: fix 130/1030 configs
wifi: ath12k: fix WMI TLV header misalignment
wifi: ath12k: Fix missing station power save configuration
====================
Adding rcu_read_lock() for all hsr_for_each_port() looks confusing.
Introduce a new helper, hsr_for_each_port_rtnl(), that assumes the
RTNL lock is held. This allows callers in suitable contexts to iterate
ports safely without explicit RCU locking.
Other code paths that rely on RCU protection continue to use
hsr_for_each_port() with rcu_read_lock().
====================
Hangbin Liu [Fri, 5 Sep 2025 09:15:33 +0000 (09:15 +0000)]
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com> Fixes: 9c10dd8eed74 ("net: hsr: Create and export hsr_get_port_ndev()") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Fri, 5 Sep 2025 09:15:32 +0000 (09:15 +0000)]
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr_port_get_hsr() iterates over ports using hsr_for_each_port(),
but many of its callers do not hold the required RCU lock.
Switch to hsr_for_each_port_rtnl(), since most callers already hold
the rtnl lock. After review, all callers are covered by either the rtnl
lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an
RCU read lock there.
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Fri, 5 Sep 2025 09:15:31 +0000 (09:15 +0000)]
hsr: use rtnl lock when iterating over ports
hsr_for_each_port is called in many places without holding the RCU read
lock, this may trigger warnings on debug kernels. Most of the callers
are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl
to allow callers in suitable contexts to iterate ports safely without
explicit RCU locking.
This patch only fixed the callers that is hold rtnl lock. Other caller
issues will be fixed in later patches.
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg [Wed, 10 Sep 2025 13:11:21 +0000 (15:11 +0200)]
wifi: nl80211: completely disable per-link stats for now
After commit 8cc71fc3b82b ("wifi: cfg80211: Fix "no buffer
space available" error in nl80211_get_station() for MLO"),
the per-link data is only included in station dumps, where
the size limit is somewhat less of an issue. However, it's
still an issue, depending on how many links a station has
and how much per-link data there is. Thus, for now, disable
per-link statistics entirely.
A complete fix will need to take this into account, make it
opt-in by userspace, and change the dump format to be able
to split a single station's data across multiple netlink
dump messages, which all together is too much development
for a fix.
Fixes: 82d7f841d9bd ("wifi: cfg80211: extend to embed link level statistics in NL message") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge tag 'mm-hotfixes-stable-2025-09-10-20-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 15 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 14 of these
fixes are for MM.
This includes
- kexec fixes from Breno for a recently introduced
use-uninitialized bug
- DAMON fixes from Quanmin Yan to avoid div-by-zero crashes
which can occur if the operator uses poorly-chosen insmod
parameters
and misc singleton fixes"
* tag 'mm-hotfixes-stable-2025-09-10-20-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add tree entry to numa memblocks and emulation block
mm/damon/sysfs: fix use-after-free in state_show()
proc: fix type confusion in pde_set_flags()
compiler-clang.h: define __SANITIZE_*__ macros only when undefined
mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc()
ocfs2: fix recursive semaphore deadlock in fiemap call
mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory
mm/mremap: fix regression in vrm->new_addr check
percpu: fix race on alloc failed warning limit
mm/memory-failure: fix redundant updates for already poisoned pages
s390: kexec: initialize kexec_buf struct
riscv: kexec: initialize kexec_buf struct
arm64: kexec: initialize kexec_buf struct in load_other_segments()
mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()
mm/damon/core: set quota->charged_from to jiffies at first charge window
mm/hugetlb: add missing hugetlb_lock in __unmap_hugepage_range()
init/main.c: fix boot time tracing crash
mm/memory_hotplug: fix hwpoisoned large folio handling in do_migrate_range()
mm/khugepaged: fix the address passed to notifier on testing young
Merge tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
First patch adds a lockdep annotation for a false-positive splat.
Last patch adds formal reviewer tag for Phil Sutter to MAINTAINERS.
Rest of the patches resolve spurious false negative results during set
lookups while another CPU is processing a transaction.
This has been broken at least since v4.18 when an unconditional
synchronize_rcu call was removed from the commit phase of nf_tables.
Quoting from Stefan Hanreichs original report:
It seems like we've found an issue with atomicity when reloading
nftables rulesets. Sometimes there is a small window where rules
containing sets do not seem to apply to incoming traffic, due to the set
apparently being empty for a short amount of time when flushing / adding
elements.
Exanple ruleset:
table ip filter {
set match {
type ipv4_addr
flags interval
elements = { 0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
}
chain pre {
type filter hook prerouting priority filter; policy accept;
ip saddr @match accept
counter comment "must never match"
}
}
Reproducer transaction:
while true:
nft -f -<<EOF
flush set ip filter match
create element ip filter match { \
0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
EOF
done
Then create traffic. to/from e.g. 192.168.2.1 to 192.168.3.10.
Once in a while the counter will increment even though the
'ip saddr @match' rule should have accepted the packet.
See individual patches for details.
Thanks to Stefan Hanreich for an initial description and reproducer for
this bug and to Pablo Neira Ayuso for reviewing earlier iterations of
the patchset.
* tag 'nf-25-09-10-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
====================
Jakub Kicinski [Thu, 11 Sep 2025 02:21:11 +0000 (19:21 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-09 (igb, i40e)
For igb:
Tianyu Xu removes passing of, no longer needed, NAPI id to avoid NULL
pointer dereference on ethtool loopback testing.
Kohei Enju corrects reporting/testing of link state when interface is
down.
For i40e:
Michal Schmidt corrects value being passed to free_irq().
Jake sets hardware maximum frame size on probe to ensure
expected/consistent state.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix Jumbo Frame support after iPXE boot
i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path
igb: fix link test skipping when interface is admin down
igb: Fix NULL pointer dereference in ethtool loopback test
====================
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
Drop phylink_{suspend,resume}() from ax88772 PM callbacks.
MDIO bus accesses have their own runtime-PM handling and will try to
wake the device if it is suspended. Such wake attempts must not happen
from PM callbacks while the device PM lock is held. Since phylink
{sus|re}sume may trigger MDIO, it must not be called in PM context.
No extra phylink PM handling is required for this driver:
- .ndo_open/.ndo_stop control the phylink start/stop lifecycle.
- ethtool/phylib entry points run in process context, not PM.
- phylink MAC ops program the MAC on link changes after resume.
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
In C, enumerated types do not have a defined size, apart from being
compatible with one of the standard types. This allows an ABI /
compiler to choose the type of an enum depending on the values it
needs to store, and storing larger values in it can lead to undefined
behaviour.
The tx_type and rx_filters members of struct kernel_ethtool_ts_info
are defined as enumerated types, but are bit arrays, where each bit
is defined by the enumerated type. This means they typically store
values in excess of the maximum value of the enumerated type, in
fact (1 << max_value) and thus must not be declared using the
enumated type.
Fix both of these to use u32, as per the corresponding __u32 UAPI type.
Fixes: 2111375b85ad ("net: Add struct kernel_ethtool_ts_info") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/E1uvMEK-00000003Amd-2pWR@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'nfs-for-6.17-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Stable patches:
- Revert "SUNRPC: Don't allow waiting for exiting tasks" as it is
breaking ltp tests
Bugfixes:
- Another set of fixes to the tracking of NFSv4 server capabilities
when crossing filesystem boundaries
- Localio fix to restore credentials and prevent triggering a
BUG_ON()
- Fix to prevent flapping of the localio on/off trigger
- Protections against 'eof page pollution' as demonstrated in
xfstests generic/363
- Series of patches to ensure correct ordering of O_DIRECT i/o and
truncate, fallocate and copy functions
- Fix a NULL pointer check in flexfiles reads that regresses 6.17
- Correct a typo that breaks flexfiles layout segment processing"
* tag 'nfs-for-6.17-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4/flexfiles: Fix layout merge mirror check.
SUNRPC: call xs_sock_process_cmsg for all cmsg
Revert "SUNRPC: Don't allow waiting for exiting tasks"
NFS: Fix the marking of the folio as up to date
NFS: nfs_invalidate_folio() must observe the offset and size arguments
NFSv4.2: Serialise O_DIRECT i/o and copy range
NFSv4.2: Serialise O_DIRECT i/o and clone range
NFSv4.2: Serialise O_DIRECT i/o and fallocate()
NFS: Serialise O_DIRECT i/o and truncate()
NFSv4.2: Protect copy offload and clone against 'eof page pollution'
NFS: Protect against 'eof page pollution'
flexfiles/pNFS: fix NULL checks on result of ff_layout_choose_ds_for_read
nfs/localio: avoid bouncing LOCALIO if nfs_client_is_local()
nfs/localio: restore creds before releasing pageio data
NFSv4: Clear the NFS_CAP_XATTR flag if not supported by the server
NFSv4: Clear NFS_CAP_OPEN_XOR and NFS_CAP_DELEGTIME if not supported
NFSv4: Clear the NFS_CAP_FS_LOCATIONS flag if it is not set
NFSv4: Don't clear capabilities that won't be reset
====================
bpf: Reject bpf_timer for PREEMPT_RT
While running './test_progs -t timer' to validate the test case from
"selftests/bpf: Introduce experimental bpf_in_interrupt()"[0] for
PREEMPT_RT, I encountered a kernel warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
To address this, reject bpf_timer usage in the verifier when
PREEMPT_RT is enabled, and skip the corresponding timer selftests.
Changes:
v2 -> v3:
* Drop skipping test case 'timer_interrupt'.
* Address comments from Alexei:
* Respin targeting bpf tree.
* Trim commit log.
libceph: fix invalid accesses to ceph_connection_v1_info
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
Merge tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove redundant __GFP_NOWARN flag is kmalloc
As now __GFP_NOWARN is part of __GFP_NOWAIT, it can be removed from
kmalloc as it is redundant.
- Use copy_from_user_nofault() instead of _inatomic() for trace markers
The trace_marker files are written to to allow user space to quickly
write into the tracing ring buffer.
Back in 2016, the get_user_pages_fast() and the kmap() logic was
replaced by a __copy_from_user_inatomic(), but didn't properly
disable page faults around it.
Since the time this was added, copy_from_user_nofault() was added
which does the required page fault disabling for us.
- Fix the assembly markup in the ftrace direct sample code
The ftrace direct sample code (which is also used for selftests), had
the size directive between the "leave" and the "ret" instead of after
the ret. This caused objtool to think the code was unreachable.
- Only call unregister_pm_notifier() on outer most fgraph registration
There was an error path in register_ftrace_graph() that did not call
unregister_pm_notifier() on error, so it was added in the error path.
The problem with that fix, is that register_pm_notifier() is only
called by the initial user of fgraph. If that succeeds, but another
fgraph registration were to fail, then unregister_pm_notifier() would
be called incorrectly.
- Fix a crash in osnoise when zero size cpumask is passed in
If a zero size CPU mask is passed in, the kmalloc() would return
ZERO_SIZE_PTR which is not checked, and the code would continue
thinking it had real memory and crash. If zero is passed in as the
size of the write, simply return 0.
- Fix possible warning in trace_pid_write()
If while processing a series of numbers passed to the "set_event_pid"
file, and one of the updates fails to allocate (triggered by a fault
injection), it can cause a warning to trigger. Check the return value
of the call to trace_pid_list_set() and break out early with an error
code if it fails.
* tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Silence warning when chunk allocation fails in trace_pid_write
tracing/osnoise: Fix null-ptr-deref in bitmap_parselist()
trace/fgraph: Fix error handling
ftrace/samples: Fix function size computation
tracing: Fix tracing_marker may trigger page fault during preempt_disable
trace: Remove redundant __GFP_NOWARN
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
Commit 12ffc3b1513e ("PM: Restrict swap use to later in the suspend
sequence") incorrectly removed a pm_restrict_gfp_mask() call from
hibernation_snapshot(), so memory allocations involving swap are not
prevented from being carried out in this code path any more which may
lead to serious breakage.
The symptoms of such breakage have become visible after adding a
shrink_shmem_memory() call to hibernation_snapshot() in commit 2640e819474f ("PM: hibernate: shrink shmem pages after dev_pm_ops.prepare()")
which caused this problem to be much more likely to manifest itself.
However, since commit 2640e819474f was initially present in the DRM
tree that did not include commit 12ffc3b1513e, the symptoms of this
issue were not visible until merge commit 260f6f4fda93 ("Merge tag
'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel")
that exposed it through an entirely reasonable merge conflict
resolution.
Fixes: 12ffc3b1513e ("PM: Restrict swap use to later in the suspend sequence") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220555 Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 6.16+ <stable@vger.kernel.org> # 6.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
projects / thirdparty / kernel / stable.git / log
