Alan Modra [Wed, 2 May 2007 13:44:37 +0000 (13:44 +0000)]
include/elf/
* internal.h (ELF_IS_SECTION_IN_SEGMENT): Check both file offset
and vma for appropriate sections.
bfd/
* elf.c (assign_file_positions_for_load_sections): Set sh_offset
here. Set sh_type to SHT_NOBITS if we won't be allocating
file space. Don't bump p_memsz for non-alloc sections. Adjust
section-in-segment check.
(assign_file_positions_for_non_load_sections): Don't set sh_offset
here for sections that have already been handled above.
* mips-tdep.c (mips_o32_push_dummy_call): Remove conditions
based on mips_abi_regsize() whose result is known in advance.
(mips_o64_push_dummy_call): Likewise.
Alan Modra [Wed, 2 May 2007 10:38:00 +0000 (10:38 +0000)]
* binutils-all/objcopy.exp (copy_setup): Don't perror, use send_log.
(copy_executable): Return early if test2 is blank.
Return unsupported rather than unresolved if we can't run
executables. Do test1 if we can compile.
H.J. Lu [Tue, 1 May 2007 12:59:24 +0000 (12:59 +0000)]
gas/config/
2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (match_template): Check suffix for crc32 in
Intel mdoe.
(process_suffix): Default the suffix of 8bit crc32 to
BYTE_MNEM_SUFFIX.
(check_byte_reg): Skip check for 8bit crc32.
Alan Modra [Mon, 30 Apr 2007 00:27:57 +0000 (00:27 +0000)]
opcodes/
PR 4436
* ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE.
gas/
PR 4436
* config/tc-ppc.c (ppc_insert_operand): Disable range check if
min > max.
* mips-linux-nat.c: Include "gregset.h".
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Move
from mips-linux-tdep.c. Change parameter type to gdb_gregset_t.
* mips-linux-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
fill_fpregset): Move to mips-linux-nat.c.
* remote-sim.c (gdbsim_store_register): Replace call to
deprecated_read_register_gen with regcache_cooked_read.
* target.c (debug_print_register): Replace calls to
deprecated_read_register_gen and read_register with
regcache_cooked_read.
* hpux-thread.c (hpux_thread_store_registers): Use
regcache_raw_collect, not regcache_raw_read.
* irix5-nat.c (fetch_core_registers): Use regcache_raw_supply,
not regcache_raw_write.
* regcache.h (regcache_valid_p): Make REGCACHE parameter const.
* regcache.c (regcache_valid_p): Allow to query cooked registers in
read-only register caches. Make REGCACHE parameter const.
(regcache_dump): Do not check DEPRECATED_REGISTER_BYTE.
* mi/mi-main.c (old_regs): Remove.
(mi_setup_architecture_data, _initialize_mi_main): Remove.
(register_changed_p): Reimplement to compare two register caches.
(mi_cmd_data_list_changed_registers): Update caller.
* mi/mi-main.h (mi_setup_architecture_data): Remove.
* mi/mi-interp.c (mi_interpreter_init): Do not call
mi_setup_architecture_data.
* alpha-nat.c (ALPHA_REGSET_BASE, ALPHA_REGSET_UNIQUE): Do not define,
inline definition at the places the macros are used.
* alpha-linux-nat.c (ALPHA_REGSET_BASE, ALPHA_REGSET_UNIQUE): Likewise.
* rs6000-aix-tdep.c: Include "regcache.h", "regset.h", and
"gdb_string.h".
(rs6000_aix32_reg_offsets, rs6000_aix64_reg_offsets): New variables.
(rs6000_aix_supply_regset, rs6000_aix_collect_regset): New functions.
(rs6000_aix32_regset, rs6000_aix64_regset): New variables.
(rs6000_aix_regset_from_core_section): New function.
(rs6000_aix_init_osabi): Register it.
(_initialize_rs6000_aix_tdep): Register GDB_OSABI_AIX osabi and
sniffer for bfd_arch_powerpc as well as bfd_arch_rs6000.
* rs6000-nat.c (CoreRegs): Do not define type.
(fetch_core_registers, rs6000_core_fns): Remove.
(_initialize_core_rs6000): Do not register it. Rename to ...
(_initialize_rs6000_nat): ... this.
* Makefile.in (rs6000-aix-tdep.o): Update dependencies.
gdb/gdbtk/:
* generic/gdbtk-wrapper.c (GDB_varobj_update): New function.
(wrap_varobj_update): Likewise.
* generic/gdbtk-wrapper.h (GDB_varobj_update): New declaration.
* generic/gdbtk-varobj.c (variable_update): Call
GDB_varobj_update() rather than varobj_update() directly. Take
the new semantics of the latter into account.
* generic/gdbtk-cmds.c: Include "varobj.h".
* generic/gdbtk-stack.c: Likewise.
* inf-ptrace.c: Include "gdb_stdint.h".
(inf_ptrace_xfer_partial): Use "uintptr_t" instead of "long" as
intermediate type when casting CORE_ADDR to PTRACE_TYPE_ARG3.
(inf_ptrace_fetch_register): Add intermediate cast to "uintptr_t"
before casting CORE_ADDR to PTRACE_TYPE_ARG3.
(inf_ptrace_store_register): Likewise.
* Makefile.in (inf-ptrace.o): Update dependencies.
* aix-thread.c (fill_sprs32): Change argument types to "uint32_t *".
Remove obsolete part of comment.
(store_regs_user_thread): Use uint32_t temporaries when calling
fill_sprs32.
(store_regs_kernel_thread): Likewise. Add assertion to verify
correct size of struct ptsprs members.
(aix_thread_xfer_memory): Fix type of myaddr.
(aix_thread_extra_thread_info): Fix compiler warning.
* rs6000-nat.c (rs6000_ptrace64): Change type of buf to "void *".
(fetch_register, store_register): Adapt callers.
PR binutils/4430
* i386-dis.c (print_displacement): New.
(OP_E): Call print_displacement instead of print_operand_value
to output displacement when either base or index exist. Print
the explicit zero displacement in 16bit mode.
H.J. Lu [Thu, 26 Apr 2007 18:15:47 +0000 (18:15 +0000)]
gas/testsuite/
2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4429
* gas/i386/i386.exp: Run "x86-64-addr32-intel" and
"x86-64-rip-intel".
* gas/i386/intelok.d: Updated.
* gas/i386/x86-64-addr32-intel.d: New file.
* gas/i386/x86-64-rip-intel.d: Likewise.
opcodes/
2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4429
* i386-dis.c (print_insn): Also swap the order of op_riprel
when swapping op_index. Break when the RIP relative address
is printed.
(OP_E): Properly handle RIP relative addressing and print the
explicit zero displacement for Intel mode.
* config/tc-avr.c (mcu_types): Add support for atmega8hva and
atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
* doc/c-avr.texi: Document new devices.
Jan Beulich [Thu, 26 Apr 2007 06:59:55 +0000 (06:59 +0000)]
Revert the value change of DT_ENCODING from 2003-01-17. Luckily (and
surprisingly) the value isn't really being used anywhere, henc no other
changes are needed.
include/elf/
2007-04-26 Jan Beulich <jbeulich@novell.com>
* common.h (DT_ENCODING): Correct value (back to spec mandated
value).
* mips-linux-nat.c: No longer include "gdbcore.h".
(mips_linux_register_addr): Move from mips-linux-tdep.c.
(mips64_linux_register_addr): Likewise.
(mips_linux_register_u_offset): Call mips_linux_register_addr or
mips64_linux_register_addr instead of register_addr.
* mips-linux-tdep.c (mips_linux_register_addr,
mips64_linux_register_addr): Move to mips-linux-nat.c.
(register_addr): Remove.
(register_addr_data, init_register_addr_data): Remove.
(_initialize_mips_linux_tdep): Do not initialize register_addr_data.
(set_mips_linux_register_addr): Remove.
(mips_linux_init_abi): Do not call set_mips_linux_register_addr.
* Makefile.in (mips-linux-nat.o): Update dependencies.
* linux-nat.c (linux_register_u_offset): Remove.
(linux_target_install_ops): New function.
(linux_target): Use it.
(linux_trad_target): New function.
* linux-nat.h (linux_trad_target): Declare.
* alpha-linux-nat.c: Include "gdbcore.h".
(alpha_linux_register_u_offset): New function.
(_initialize_alpha_linux_nat): Use linux_trad_target.
* mips-linux-nat.c: Include "gdbcore.h".
(mips_linux_register_u_offset): New function.
(_initialize_mips_linux_nat): Use linux_trad_target.
* config/arm/linux.mh (NAT_FILE): Set to config/nm-linux.h.
* config/arm/nm-linux.h: Delete file.
Nick Clifton [Tue, 24 Apr 2007 10:56:58 +0000 (10:56 +0000)]
* objcopy.c (filter_symbols): Explicitly stripping a symbol used in relocations is an error.
Retype 'keep' to bfd_boolean.
* binutils-all/objcopy.exp: Add test for stripping a symbol used in a relocation.
* binutils-all/needed-by-reloc.s: New file.
Alan Modra [Tue, 24 Apr 2007 04:29:03 +0000 (04:29 +0000)]
* ld-linkonce/x.s: Use .gcc_except_table instead of .eh_frame
to test that entry for deleted function is zeroed. Add a
somewhat closer to normal .eh_frame to test that fde for
deleted function is removed.
* ld-linkonce/y.s: Likewise.
* ld-linkonce/zeroeh.ld: Place .gcc_except_table too.
* ld-linkonce/zeroehl32.d: Update.
Alan Modra [Sun, 22 Apr 2007 05:27:58 +0000 (05:27 +0000)]
* read.c (read_a_source_file): Skip multiple spaces to
cover hack in mmix md_start_line_hook which overwrites a
colon with a space. Delete sermon and needless assertion.
Richard Earnshaw [Sat, 21 Apr 2007 19:44:09 +0000 (19:44 +0000)]
* arm-dis.c (arm_opcodes): Disassemble to unified syntax.
(thumb_opcodes): Add missing white space in adr.
(arm_decode_shift): New parameter, print_shift. Only decode the
shift parameter if set. Adjust callers.
(print_insn_arm): Support for operand type q with no shift decode.
projects / thirdparty / binutils-gdb.git / log
