Junio C Hamano [Thu, 23 Sep 2021 20:44:48 +0000 (13:44 -0700)]
Merge branch 'mr/bisect-in-c-4'
Rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--bisect-next-check` subcommand
bisect--helper: reimplement `bisect_run` shell function in C
bisect--helper: reimplement `bisect_visualize()` shell function in C
run-command: make `exists_in_PATH()` non-static
t6030-bisect-porcelain: add test for bisect visualize
t6030-bisect-porcelain: add tests to control bisect run exit cases
Junio C Hamano [Thu, 23 Sep 2021 20:44:47 +0000 (13:44 -0700)]
Merge branch 'ab/http-drop-old-curl-plus'
Conditional compilation around versions of libcURL has been
straightened out.
* ab/http-drop-old-curl-plus:
http: don't hardcode the value of CURL_SOCKOPT_OK
http: centralize the accounting of libcurl dependencies
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
http: correct version check for CURL_HTTP_VERSION_2
http: drop support for curl < 7.18.0 (again)
Makefile: drop support for curl < 7.9.8 (again)
INSTALL: mention that we need libcurl 7.19.4 or newer to build
INSTALL: reword and copy-edit the "libcurl" section
INSTALL: don't mention the "curl" executable at all
Replace a handcrafted data structure used to keep track of bad
objects in the packfile API by an oidset.
* rs/packfile-bad-object-list-in-oidset:
packfile: use oidset for bad objects
packfile: convert has_packed_and_bad() to object_id
packfile: convert mark_bad_packed_object() to object_id
midx: inline nth_midxed_pack_entry()
oidset: make oidset_size() an inline function
Junio C Hamano [Mon, 20 Sep 2021 22:20:45 +0000 (15:20 -0700)]
Merge branch 'rs/no-mode-to-open-when-appending'
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
Junio C Hamano [Mon, 20 Sep 2021 22:20:45 +0000 (15:20 -0700)]
Merge branch 'js/run-command-close-packs'
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Junio C Hamano [Mon, 20 Sep 2021 22:20:44 +0000 (15:20 -0700)]
Merge branch 'ds/mergies-with-sparse-index'
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
Junio C Hamano [Mon, 20 Sep 2021 22:20:44 +0000 (15:20 -0700)]
Merge branch 'ds/sparse-index-ignored-files'
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
Junio C Hamano [Mon, 20 Sep 2021 22:20:43 +0000 (15:20 -0700)]
Merge branch 'ab/make-tags-cleanup'
Build clean-up for "make tags" and friends.
* ab/make-tags-cleanup:
Makefile: normalize clobbering & xargs for tags targets
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Makefile: don't use "FORCE" for tags targets
Makefile: add QUIET_GEN to "cscope" target
Makefile: move ".PHONY: cscope" near its target
Junio C Hamano [Mon, 20 Sep 2021 22:20:43 +0000 (15:20 -0700)]
Merge branch 'ab/serve-cleanup'
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
Junio C Hamano [Mon, 20 Sep 2021 22:20:42 +0000 (15:20 -0700)]
Merge branch 'ab/unbundle-progress'
Add progress display to "git bundle unbundle".
* ab/unbundle-progress:
bundle: show progress on "unbundle"
index-pack: add --progress-title option
bundle API: change "flags" to be "extra_index_pack_args"
bundle API: start writing API documentation
Junio C Hamano [Mon, 20 Sep 2021 22:20:42 +0000 (15:20 -0700)]
Merge branch 'tb/pack-finalize-ordering'
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
Junio C Hamano [Mon, 20 Sep 2021 22:20:41 +0000 (15:20 -0700)]
Merge branch 'ab/progress-users-adjust-counters'
The code to show progress indicator in a few code paths did not
cover between 0-100%, which has been corrected.
* ab/progress-users-adjust-counters:
entry: show finer-grained counter in "Filtering content" progress line
commit-graph: fix bogus counter in "Scanning merged commits" progress line
Junio C Hamano [Mon, 20 Sep 2021 22:20:41 +0000 (15:20 -0700)]
Merge branch 'dt/submodule-diff-fixes'
"git diff --submodule=diff" showed failure from run_command() when
trying to run diff inside a submodule, when the user manually
removes the submodule directory.
* dt/submodule-diff-fixes:
diff --submodule=diff: don't print failure message twice
diff --submodule=diff: do not fail on ever-initialied deleted submodules
t4060: remove unused variable
Junio C Hamano [Mon, 20 Sep 2021 22:20:40 +0000 (15:20 -0700)]
Merge branch 'lh/systemd-timers'
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
Junio C Hamano [Mon, 20 Sep 2021 22:20:40 +0000 (15:20 -0700)]
Merge branch 'ab/tr2-leaks-and-fixes'
The tracing of process ancestry information has been enhanced.
* ab/tr2-leaks-and-fixes:
tr2: log N parent process names on Linux
tr2: do compiler enum check in trace2_collect_process_info()
tr2: leave the parent list empty upon failure & don't leak memory
tr2: stop leaking "thread_name" memory
tr2: clarify TRACE2_PROCESS_INFO_EXIT comment under Linux
tr2: remove NEEDSWORK comment for "non-procfs" implementations
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
Junio C Hamano [Mon, 20 Sep 2021 22:20:39 +0000 (15:20 -0700)]
Merge branch 'tb/multi-pack-bitmaps'
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Junio C Hamano [Mon, 20 Sep 2021 22:20:39 +0000 (15:20 -0700)]
Merge branch 'ps/fetch-optim'
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
Junio C Hamano [Wed, 15 Sep 2021 20:15:26 +0000 (13:15 -0700)]
Merge branch 'pb/test-use-user-env'
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
Junio C Hamano [Wed, 15 Sep 2021 20:15:26 +0000 (13:15 -0700)]
Merge branch 'jc/trivial-threeway-binary-merge'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Jeff King [Wed, 15 Sep 2021 17:24:52 +0000 (13:24 -0400)]
t1400: avoid SIGPIPE race condition on fifo
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 13 Sep 2021 21:23:05 +0000 (22:23 +0100)]
doc: config, tell readers of `git help --config`
The `git help` command gained the ability to list config variables in 3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After reimplementation of `git bisect run` in C,
`--bisect-next-check` subcommand is not needed anymore.
Let's remove it from options list and code.
Mentored by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect--helper: reimplement `bisect_visualize()` shell function in C
Reimplement the `bisect_visualize()` shell function
in C and also add `--bisect-visualize` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `static` keyword from `exists_in_PATH()` function
and declare the function in `run-command.h` file.
The function will be used in bisect_visualize() in a later
commit.
Mentored by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new git-curl-compat.h header to define CURL_SOCKOPT_OK to its
known value if we're on an older curl version that doesn't have it. It
was hardcoded in http.c in a15d069a198 (http: enable keepalive on TCP
sockets, 2013-10-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: centralize the accounting of libcurl dependencies
As discussed in 644de29e220 (http: drop support for curl < 7.19.4,
2021-07-30) checking against LIBCURL_VERSION_NUM isn't as reliable as
checking specific symbols present in curl, as some distros have been
known to backport features.
However, while some of the curl_easy_setopt() arguments we rely on are
macros, others are enum, and we can't assume that those that are
macros won't change into enums in the future.
So we're still going to have to check LIBCURL_VERSION_NUM, but by
doing that in one central place and using a macro definition of our
own, anyone who's backporting features can define it themselves, and
thus have access to more modern curl features that they backported,
even if they didn't bump the LIBCURL_VERSION_NUM.
More importantly, as shown in a preceding commit doing these version
checks makes for hard to read and possibly buggy code, as shown by the
bug fixed there where we were conflating base 10 for base 16 when
comparing the version.
By doing them all in one place we'll hopefully reduce the chances of
such future mistakes, furthermore it now becomes easier to see at a
glance what the oldest supported version is, which makes it easier to
reason about any future deprecation similar to the recent e48a623dea0 (Merge branch 'ab/http-drop-old-curl', 2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
In aeff8a61216 (http: implement public key pinning, 2016-02-15) a
dependency and warning() was added if curl older than 7.44.0 was used,
but the relevant code depended on CURLOPT_PINNEDPUBLICKEY, introduced
in 7.39.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http: correct version check for CURL_HTTP_VERSION_2
In d73019feb44 (http: add support selecting http version, 2018-11-08)
a dependency was added on CURL_HTTP_VERSION_2, but this feature was
introduced in curl version 7.43.0, not 7.47.0, as the incorrect
version check led us to believe.
As looking through the history of that commit on the mailing list will
reveal[1], the reason for this is that an earlier version of it
depended on CURL_HTTP_VERSION_2TLS, which was introduced in libcurl
7.47.0.
But the version that made it in in d73019feb44 had dropped the
dependency on CURL_HTTP_VERSION_2TLS, but the corresponding version
check was not corrected.
The newest symbol we depend on is CURL_HTTP_VERSION_2. It was added in
7.33.0, but the CURL_HTTP_VERSION_2 alias we used was added in
7.47.0. So we could support an even older version here, but let's just
correct the checked version.
In 644de29e220 (http: drop support for curl < 7.19.4, 2021-07-30) we
dropped support for curl < 7.19.4, so we can drop support for this
non-obvious dependency on curl < 7.18.0.
It's non-obvious because in curl's hex version notation 0x071800 is
version 7.24.0, *not* 7.18.0, so at a glance this patch looks
incorrect.
But it's correct, because the existing version check being removed
here is wrong. The check guards use of the following curl defines:
I.e. the oldest version that has these is in fact 7.18.0, not
7.24.0. That we were checking 7.24.0 is just an mistake in 6d7afe07f29 (remote-http(s): support SOCKS proxies, 2015-10-26),
i.e. its author confusing base 10 and base 16.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1119a15b5c8 (http: drop support for curl < 7.11.1, 2021-07-30)
support for curl versions older than 7.11.1 was removed, and we
currently require at least version 7.19.4, see 644de29e220 (http: drop
support for curl < 7.19.4, 2021-07-30).
In those changes this Makefile-specific check added in 0890098780f (Decide whether to build http-push in the Makefile,
2005-11-18) was missed, now that we're never going to use such an
ancient curl version we don't need to check that we have at least
7.9.8 here. I have no idea what in http-push.c broke on versions older
than that.
This does not impact "NO_CURL" setups, as this is in the "else" branch
after that check.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
INSTALL: mention that we need libcurl 7.19.4 or newer to build
Without NO_CURL=Y we require at least version "7.19.4" of libcurl, see 644de29e220 (http: drop support for curl < 7.19.4, 2021-07-30). Let's
document this in the "INSTALL" document.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the launchctl_boot_plist() function was added in a16eb6b1ff3 (maintenance: skip bootout/bootstrap when plist is
registered, 2021-08-24), an unused call to launchctl_get_uid() was
added along with it. That call appears to have been copy/pasted from
launchctl_boot_plist().
Since we can remove that, we can also get rid of the "result"
variable, whose only purpose was allow for the free() between its
assignment and the return. That pattern also appears to have been
copy/pasted from launchctl_boot_plist().
As the patch shows the returned value from launchctl_get_uid() wasn't
used at all in this function. The launchctl_get_uid() function itself
just calls xstrfmt() and getuid(), neither of which have any subtle
global side-effects, so this removal is safe.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In be5d88e1128 (test-tool run-command: learn to run (parts of) the
testsuite, 2019-10-04) an init pattern was added that would use
TESTSUITE_INIT, but then promptly memset() everything back to 0. We'd
then set the "dup" on the two string lists.
Our setting of "next" to "-1" thus did nothing, we'd reset it to "0"
before using it. Let's set it to "0" instead, and trust the
"STRING_LIST_INIT_DUP" to set "strdup_strings" appropriately for us.
Note that while we compile this code, there's no in-tree user for the
"testsuite" target being modified here anymore, see the discussion at
and around <nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet>[1].
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 11 Sep 2021 15:01:16 +0000 (11:01 -0400)]
strvec: use size_t to store nr and alloc
We converted argv_array (which later became strvec) to use size_t in 819f0e76b1 (argv-array: use size_t for count and alloc, 2020-07-28) in
order to avoid the possibility of integer overflow. But later, commit d70a9eb611 (strvec: rename struct fields, 2020-07-28) accidentally
converted these back to ints!
Those two commits were part of the same patch series. I'm pretty sure
what happened is that they were originally written in the opposite order
and then cleaned up and re-ordered during an interactive rebase. And
when resolving the inevitable conflict, I mistakenly took the "rename"
patch completely, accidentally dropping the type change.
We can correct it now; better late than never.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 11:45:43 +0000 (13:45 +0200)]
compression: drop write-only core_compression_* variables
Since 8de7eeb54b (compression: unify pack.compression configuration
parsing, 2016-11-15) the variables core_compression_level and
core_compression_seen are only set, but never read. Remove them.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two have fallen out of use with the SHA-256 migration.
The last use of $_x40 was removed in fc7e73d7ef (t4013: improve
diff-post-processor logic, 2020-08-21) and
The last use of $_z40 was removed in 7a868c51c2 (t5562: use $ZERO_OID,
2019-12-21), but it was then needlessly refactored to be hash-agnostic
in 192b517589 (t: use hash-specific lookup tables to define test
constants, 2020-02-22). We can just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup: remove unused "pull with rebase" message
Remove the "pull with rebase" message previously used by the
git-pull.sh script, which was removed in 49eb8d39c78 (Remove
contrib/examples/*, 2018-03-25).
Even if some out-of-tree user copy/pasted the old git-pull.sh code,
and relied on passing it a "pull with rebase" argument, we'll fall
back on the "*" case here, they just won't get the "pull with rebase"
part of their message translated.
I don't think it's likely that anyone out-of-tree relied on that, but
I'm being conservative here per the discussion that can be found
upthread of [1].
git-submodule: remove unused is_zero_oid() function
The is_zero_oid() function in git-submodule.sh has not been used since e83e3333b57 (submodule: port submodule subcommand 'summary' from shell
to C, 2020-08-13), so we can remove it.
This was the last user of the sane_egrep() function in
git-sh-setup.sh. I'm not removing it in case some out-of-tree user
relied on it. Per the discussion that can be found upthread of [1].
René Scharfe [Sat, 11 Sep 2021 20:43:26 +0000 (22:43 +0200)]
packfile: use oidset for bad objects
Store the object ID of broken pack entries in an oidset instead of
keeping only their hashes in an unsorted array. The resulting code is
shorter and easier to read. It also handles the (hopefully) very rare
case of having a high number of bad objects better.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 20:39:31 +0000 (22:39 +0200)]
midx: inline nth_midxed_pack_entry()
fill_midx_entry() finds the position of an object ID and passes it to
nth_midxed_pack_entry(), which uses the position to look up the object
ID for its own purposes. Inline the latter into the former to avoid
that lookup.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 20:36:40 +0000 (22:36 +0200)]
oidset: make oidset_size() an inline function
oidset_size() just reads a single word from memory and returns it.
Avoid the function call overhead for this trivial operation by turning
it into an inline function.
While we're at it, declare its parameter const to allow it to be used
on read-only oidsets.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
INSTALL: don't mention the "curl" executable at all
In 1d53f90ed97 (The "curl" executable is no longer required,
2008-06-15) the wording for requiring curl(1) was changed to the
current "you might also want...".
Mentioning the "curl" executable at all is just confusing, someone
building git might want to use it to debug things, but they might also
just use wget(1) or some other http client. The "curl" executable has
the advantage that you might be able to e.g. reproduce a bug in git's
usage of libcurl with it, but anyone going to those extents is
unlikely to be aided by this note in INSTALL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both Johannes and I assumed (perhaps due to familiarity with rebase)
that am --abort would return the user to a clean state. However, since
am, unlike rebase, is intended to be used within a dirty working tree,
--abort will only clean the files involved in the am operation.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 10 Sep 2021 14:10:19 +0000 (10:10 -0400)]
docs/protocol-v2: point readers transport config discussion
We recently added tips for server admins to configure various transports
to support v2's GIT_PROTOCOL variable. While the protocol-v2 document is
pretty technical and not of interest to most admins, it may be a
starting point for them to figure out how to turn on v2. Let's put some
pointers from there to the other documentation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 10 Sep 2021 14:09:56 +0000 (10:09 -0400)]
docs/git: discuss server-side config for GIT_PROTOCOL
The v2 protocol requires that the GIT_PROTOCOL environment variable gets
passed around, but we don't have any documentation describing how this
is supposed to work. In particular, we need to note what server admins
might need to configure to make things work.
The definition of the GIT_PROTOCOL variable is probably the best place
for this, since:
- we deal with multiple transports (ssh, http, etc).
Transport-specific documentation (like the git-http-backend bits
added in the previous commit) are helpful for those transports, but
this gives a broader overview. Plus we do not have a specific
transport endpoint program for ssh, so this is a reasonable place to
mention it.
- the server side of the protocol involves multiple programs. For now,
upload-pack is the only endpoint which uses GIT_PROTOCOL, but that
will likely expand in the future. We're better off with a central
discussion of what the server admin might need to do. However, for
discoverability, this patch adds a pointer from upload-pack's
documentation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 10 Sep 2021 14:09:13 +0000 (10:09 -0400)]
docs/http-backend: mention v2 protocol
Historically there was a little bit of configuration needed at the
webserver level in order to get the client's v2 protocol probes to Git.
But when we introduced the v2 protocol, we never documented these.
As of the previous commit, this should mostly work out of the box
without any explicit configuration. But it's worth documenting this to
make it clear how we expect it to work, especially in the face of
webservers which don't provide all headers over the CGI interface. Or
anybody who runs across this documentation but has an older version of
Git (or _used_ to have an older version, and wonders why they still have
a SetEnvIf line in their Apache config and whether it's still
necessary).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a client requests the v2 protocol over HTTP, they set the
Git-Protocol header. Webservers will generally make that available to
our CGI as HTTP_GIT_PROTOCOL in the environment. However, that's not
sufficient for upload-pack, etc, to respect it; they look in
GIT_PROTOCOL (without the HTTP_ prefix).
Either the webserver or the CGI is responsible for relaying that HTTP
header into the GIT_PROTOCOL variable. Traditionally, our tests have
configured the webserver to do so, but that's a burden on the server
admin. We can make this work out of the box by having the http-backend
CGI copy the contents of HTTP_GIT_PROTOCOL to GIT_PROTOCOL.
There are no new tests here. By removing the SetEnvIf line from our
test Apache config, we're now relying on this behavior of http-backend
to trigger the v2 protocol there (and there are numerous tests that fail
if this doesn't work).
There is one subtlety here: we copy HTTP_GIT_PROTOCOL only if there is
no existing GIT_PROTOCOL variable. That leaves the webserver admin free
to override the client's decision if they choose. This is unlikely to be
useful in practice, but is more flexible. And indeed, it allows the
v2-to-v0 fallback test added in the previous commit to continue working.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 10 Sep 2021 14:04:42 +0000 (10:04 -0400)]
t5551: test v2-to-v0 http protocol fallback
Since we use the v2 protocol by default, the connection of a v2 client
to a v2 server is well covered by the test suite. And with the
GIT_TEST_PROTOCOL_VERSION knob, we can easily test a v0 client
connecting to a v2-aware server (which will then just speak v0). But we
have no regular tests that a v2 client, when encountering a non-v2-aware
server, will correctly fall back to using v0.
In theory this is a job for the cross-version tests in t/interop, but:
- they cover only git:// and file:// clones
- they are not part of the usual test suite, so nobody ever runs them
anyway
Since using v2 over http requires configuring the web server to pass
along the Git-Protocol header, we can easily create a situation where
the server does not respect the v2 probe, and the conversation falls
back to v0.
This works just fine. This new test is not about fixing any particular
bug, but just making sure that the system works (and continues to work)
as expected.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Sep 2021 18:46:29 +0000 (11:46 -0700)]
Merge branch 'ab/retire-advice-config'
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
Junio C Hamano [Fri, 10 Sep 2021 18:46:29 +0000 (11:46 -0700)]
Merge branch 'mk/clone-recurse-submodules'
After "git clone --recurse-submodules", all submodules are cloned
but they are not by default recursed into by other commands. With
submodule.stickyRecursiveClone configuration set, submodule.recurse
configuration is set to true in a repository created by "clone"
with "--recurse-submodules" option.
* mk/clone-recurse-submodules:
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
projects / thirdparty / git.git / log
