Ming Lei [Wed, 15 Oct 2025 11:07:30 +0000 (19:07 +0800)]
loop: try to handle loop aio command via NOWAIT IO first
Try to handle loop aio command via NOWAIT IO first, then we can avoid to
queue the aio command into workqueue. This is usually one big win in
case that FS block mapping is stable, Mikulas verified [1] that this way
improves IO perf by close to 5X in 12jobs sequential read/write test,
in which FS block mapping is just stable.
Fallback to workqueue in case of -EAGAIN. This way may bring a little
cost from the 1st retry, but when running the following write test over
loop/sparse_file, the actual effect on randwrite is obvious:
```
truncate -s 4G 1.img #1.img is created on XFS/virtio-scsi
losetup -f 1.img --direct-io=on
fio --direct=1 --bs=4k --runtime=40 --time_based --numjobs=1 --ioengine=libaio \
--iodepth=16 --group_reporting=1 --filename=/dev/loop0 -name=job --rw=$RW
```
- RW=randwrite: obvious IOPS drop observed
- RW=write: a little drop(%5 - 10%)
This perf drop on randwrite over sparse file will be addressed in the
following patch.
BLK_MQ_F_BLOCKING has to be set for calling into .read_iter() or .write_iter()
which might sleep even though it is NOWAIT, and the only effect is that rcu read
lock is replaced with srcu read lock.
Ming Lei [Wed, 15 Oct 2025 11:07:28 +0000 (19:07 +0800)]
loop: add lo_submit_rw_aio()
Refactor lo_rw_aio() by extracting the I/O submission logic into a new
helper function lo_submit_rw_aio(). This further improves code organization
by separating the I/O preparation, submission, and completion handling into
distinct phases.
Prepare for using NOWAIT to improve loop performance.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 15 Oct 2025 11:07:27 +0000 (19:07 +0800)]
loop: add helper lo_rw_aio_prep()
Add helper lo_rw_aio_prep() to separate the preparation phase(setting up bio
vectors and initializing the iocb structure) from the actual I/O execution
in the loop block driver.
Prepare for using NOWAIT to improve loop performance.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sukrut Heroorkar [Tue, 18 Nov 2025 09:07:53 +0000 (14:37 +0530)]
drbd: turn bitmap I/O comments into regular block comments
W=1 build warns because the bitmap I/O comments use '/**', which
marks them as kernel-doc comments even though these functions do not
document an external API.
Convert these comments to regular block comments so kernel-doc no
longer parses them.
Li Chen [Mon, 17 Nov 2025 05:34:07 +0000 (13:34 +0800)]
block: rate-limit capacity change info log
loop devices under heavy stress-ng loop streessor can trigger many
capacity change events in a short time. Each event prints an info
message from set_capacity_and_notify(), flooding the console and
contributing to soft lockups on slow consoles.
Switch the printk in set_capacity_and_notify() to
pr_info_ratelimited() so frequent capacity changes do not spam
the log while still reporting occasional changes.
Cc: stable@vger.kernel.org Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
In Documentation/admin-guide/blockdev/zoned_loop.rst, add the
description of the zone_append and ordered_zone_append configuration
arguments of zloop "add" command (device creation).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sat, 15 Nov 2025 12:15:55 +0000 (21:15 +0900)]
zloop: introduce the ordered_zone_append configuration parameter
The zone append operation processing for zloop devices is similar to any
other command, that is, the operation is processed as a command work
item, without any special serialization between the work items (beside
the zone mutex for mutually exclusive code sections).
This processing is fine and gives excellent performance. However, it has
a side effect: zone append operation are very often reordered and
processed in a sequence that is very different from their issuing order
by the user. This effect is very visible using an XFS file system on top
of a zloop device. A simple file write leads to many file extents as the
data writes using zone append are reordered and so result in the
physical order being different than the file logical order.
E.g. executing:
This is fine and actually allows to exercise XFS zone garbage collection
very well. However, this also makes debugging/working on XFS data
placement harder as the underlying device will most of the time reorder
IOs, resulting in many file extents.
Allow a user to mitigate this with the new ordered_zone_append
configuration parameter. For a zloop device created with this parameter
specified, the sector of a zone append command is set early, when the
command is submitted by the block layer with the zloop_queue_rq()
function, instead of in the zloop_rw() function which is exectued later
in the command work item context. This change ensures that more often
than not, zone append operations data end up being written in the same
order as the command submission by the user.
In the case of XFS, this leads to far less file data extents. E.g., for
the previous example, we get a single file data extent for the written
file.
Since we cannot use a mutex in the context of the zloop_queue_rq()
function to atomically set a zone append operation sector to the target
zone write pointer location and increment that the write pointer, a new
per-zone spinlock is introduced to protect a zone write pointer access
and modifications. To check a zone write pointer location and set a zone
append operation target sector to that value, the function
zloop_set_zone_append_sector() is introduced and called from
zloop_queue_rq().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sat, 15 Nov 2025 12:15:54 +0000 (21:15 +0900)]
zloop: introduce the zone_append configuration parameter
A zloop zoned block device declares to the block layer that it supports
zone append operations. That is, a zloop device ressembles an NVMe ZNS
devices supporting zone append.
This native support is fine but it does not allow exercising the block
layer zone write plugging emulation of zone append, as is done with SCSI
or ATA SMR HDDs.
Introduce the zone_append configuration parameter to allow creating a
zloop device without native support for zone append, thus relying on the
block layer zone append emulation. If not specified, zone append support
is enabled by default. Otherwise, a value of 0 disables native zone
append and a value of 1 enables it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sat, 15 Nov 2025 12:15:53 +0000 (21:15 +0900)]
zloop: simplify checks for writes to sequential zones
The function zloop_rw() already checks early that a request is fully
contained within the target zone. So this check does not need to be done
again for regular writes to sequential zones. Furthermore, since zone
append operations are always directed to the zone write pointer
location, we do not need to check for their alignment to that value
after setting it. So turn the "if" checking the write pointer alignment
into an "else if".
While at it, improve the comment describing the write pointer
modification and how this value is corrected in case of error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sat, 15 Nov 2025 12:15:52 +0000 (21:15 +0900)]
zloop: fail zone append operations that are targeting full zones
zloop_rw() will fail any regular write operation that targets a full
sequential zone. The check for this is indirect and achieved by checking
the write pointer alignment of the write operation. But this check is
ineffective for zone append operations since these are alwasy
automatically directed at a zone write pointer.
Prevent zone append operations from being executed in a full zone with
an explicit check of the zone condition.
Fixes: eb0570c7df23 ("block: new zoned loop block device driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sat, 15 Nov 2025 12:15:51 +0000 (21:15 +0900)]
zloop: make the write pointer of full zones invalid
The write pointer of zones that are in the full condition is always
invalid. Reflect that fact by setting the write pointer of full zones
to ULLONG_MAX.
Fixes: eb0570c7df23 ("block: new zoned loop block device driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guenter Roeck [Fri, 14 Nov 2025 23:54:33 +0000 (15:54 -0800)]
block/blk-throttle: drop unneeded blk_stat_enable_accounting
After the removal of CONFIG_BLK_DEV_THROTTLING_LOW, it is no longer
necessary to enable block accounting, so remove the call to
blk_stat_enable_accounting(). With that, the track_bio_latency variable
is no longer used and can be deleted from struct throtl_data. Also,
including blk-stat.h is no longer necessary.
Guenter Roeck [Fri, 14 Nov 2025 23:54:32 +0000 (15:54 -0800)]
block/blk-throttle: Fix throttle slice time for SSDs
Commit d61fcfa4bb18 ("blk-throttle: choose a small throtl_slice for SSD")
introduced device type specific throttle slices if BLK_DEV_THROTTLING_LOW
was enabled. Commit bf20ab538c81 ("blk-throttle: remove
CONFIG_BLK_DEV_THROTTLING_LOW") removed support for BLK_DEV_THROTTLING_LOW,
but left the device type specific throttle slices in place. This
effectively changed throttling behavior on systems with SSD which now use
a different and non-configurable slice time compared to non-SSD devices.
Practical impact is that throughput tests with low configured throttle
values (65536 bps) experience less than expected throughput on SSDs,
presumably due to rounding errors associated with the small throttle slice
time used for those devices. The same tests pass when setting the throttle
values to 65536 * 4 = 262144 bps.
The original code sets the throttle slice time to DFL_THROTL_SLICE_HD if
CONFIG_BLK_DEV_THROTTLING_LOW is disabled. Restore that code to fix the
problem. With that, DFL_THROTL_SLICE_SSD is no longer necessary. Revert to
the original code and re-introduce DFL_THROTL_SLICE to replace both
DFL_THROTL_SLICE_HD and DFL_THROTL_SLICE_SSD. This effectively reverts
commit d61fcfa4bb18 ("blk-throttle: choose a small throtl_slice for SSD").
While at it, also remove MAX_THROTL_SLICE since it is not used anymore.
Keith Busch [Fri, 14 Nov 2025 18:31:45 +0000 (10:31 -0800)]
block: consider discard merge last
If the next discard range is contiguous with the current range being
considered, it's cheaper to expand the current range than to append an
additional bio.
Rene Rebe [Fri, 14 Nov 2025 13:41:27 +0000 (14:41 +0100)]
floppy: fix for PAGE_SIZE != 4KB
For years I wondered why the floppy driver does not just work on
sparc64, e.g:
root@SUNW_375_0066:# disktype /dev/fd0
disktype: Can't open /dev/fd0: No such device or address
[ 525.341906] disktype: attempt to access beyond end of device
fd0: rw=0, sector=0, nr_sectors = 16 limit=8
[ 525.341991] floppy: error 10 while reading block 0
Turns out floppy.c __floppy_read_block_0 tries to read one page for
the first test read to determine the disk size and thus fails if that
is greater than 4k. Adjust minimum MAX_DISK_SIZE to PAGE_SIZE to fix
floppy on sparc64 and likely all other PAGE_SIZE != 4KB configs.
Cc: stable@vger.kernel.org Signed-off-by: René Rebe <rene@exactco.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rene Rebe [Fri, 14 Nov 2025 14:30:33 +0000 (15:30 +0100)]
ps3disk: use memcpy_{from,to}_bvec index
With 6e0a48552b8c (ps3disk: use memcpy_{from,to}_bvec) converting
ps3disk to new bvec helpers, incrementing the offset was accidently
lost, corrupting consecutive buffers. Restore index for non-corrupted
data transfers.
Fixes: 6e0a48552b8c (ps3disk: use memcpy_{from,to}_bvec) Signed-off-by: René Rebe <rene@exactco.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 14 Nov 2025 12:10:09 +0000 (05:10 -0700)]
Merge branch 'p2pdma-mmio-6.19.v5' into for-6.19/block
Merge MMIO P2P DMA series from Leon:
"This patch series improves block layer and NVMe driver support for MMIO
memory regions, particularly for peer-to-peer (P2P) DMA transfers that
go through the host bridge.
The series addresses a critical gap where P2P transfers through the
host bridge (PCI_P2PDMA_MAP_THRU_HOST_BRIDGE) were not properly marked
as MMIO memory, leading to potential issues with:
- Inappropriate CPU cache synchronization operations on MMIO regions
- Incorrect DMA mapping/unmapping that doesn't respect MMIO semantics
- Missing IOMMU configuration for MMIO memory handling
This work is extracted from the larger DMA physical API improvement
series [1] and focuses specifically on block layer and NVMe
requirements for MMIO memory support.
Leon Romanovsky [Fri, 14 Nov 2025 09:07:04 +0000 (11:07 +0200)]
block-dma: properly take MMIO path
In commit eadaa8b255f3 ("dma-mapping: introduce new DMA attribute to
indicate MMIO memory"), DMA_ATTR_MMIO attribute was added to describe
MMIO addresses, which require to avoid any memory cache flushing, as
an outcome of the discussion pointed in Link tag below.
In case of PCI_P2PDMA_MAP_THRU_HOST_BRIDGE transfer, blk-mq-dm logic
treated this as regular page and relied on "struct page" DMA flow.
That flow performs CPU cache flushing, which shouldn't be done here,
and doesn't set IOMMU_MMIO flag in DMA-IOMMU case.
As a solution, let's encode peer-to-peer transaction type in NVMe IOD
flags variable and provide it to blk-mq-dma API.
Link: https://lore.kernel.org/all/f912c446-1ae9-4390-9c11-00dce7bf0fd3@arm.com/ Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 13 Nov 2025 16:28:00 +0000 (09:28 -0700)]
Merge branch 'elevator-switch-6.19' into for-6.19/block
Merge elevator switching improvements from Nilay:
"This patchset reorganizes the elevator switch path used during both
nr_hw_queues update and elv_iosched_store() operations to address a
recently reported lockdep splat [1].
The warning highlights a locking dependency between ->freeze_lock and
->elevator_lock on pcpu_alloc_mutex, triggered when the Kyber scheduler
dynamically allocates its private scheduling data. The fix is to ensure
that such allocations occur outside the locked sections, thus
eliminating the dependency chain.
While working on this, it also became evident that the nr_hw_queue
update code maintains two disjoint xarrays—one for elevator tags and
another for elevator type—both serving the same purpose. Unifying these
into a single elv_change_ctx structure improves clarity and
maintainability.
This series therefore implements five patches:
The first perparatory patch unifies elevator tags and type xarrays. It
combines both xarrays into a single struct elv_change_ctx, simplifying
per-queue elevator state management.
The second patch is aimed to group together all elevator-related
resources that share the same lifetime and as a first step we move the
elevator tags pointer from struct elv_change_ctx into the newly
introduced struct elevator_resources. The subsequent patch extends the
struct elevator_resources to include other elevator-related data.
The third patch introduce ->alloc_sched_data and ->free_sched_data
elevator ops which could be then used to safely allocate and free
scheduler data.
The fourth patch now builds upon the previous patch and starts using
the newly introduced alloc/free sched data methods in the earlier patch
during elevator switch and nr_hw_queue update. And while doing so, it's
ensured that sched data allocation and free happens before we acquire
->freeze_lock and ->elevator_lock thus preventing its dependency on
pcpu_alloc_mutex.
The last patch of this series converts Kyber scheduler to use the new
methods inroduced in the previous patch. It hooks Kyber’s scheduler
data allocation and teardown logic from ->init_sched and ->exit_sched
into the new methods, ensuring memory operations are performed outside
locked sections.
Together, these changes simplify the elevator switch logic and prevent
the reported lockdep splat."
Link: https://lore.kernel.org/linux-block/20251113090619.2030737-1-nilay@linux.ibm.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* elevator-switch-6.19:
block: define alloc_sched_data and free_sched_data methods for kyber
block: use {alloc|free}_sched data methods
block: introduce alloc_sched_data and free_sched_data elevator methods
block: move elevator tags into struct elevator_resources
block: unify elevator tags and type xarrays into struct elv_change_ctx
Nilay Shroff [Thu, 13 Nov 2025 08:58:22 +0000 (14:28 +0530)]
block: define alloc_sched_data and free_sched_data methods for kyber
Currently, the Kyber elevator allocates its private data dynamically in
->init_sched and frees it in ->exit_sched. However, since ->init_sched
is invoked during elevator switch after acquiring both ->freeze_lock and
->elevator_lock, it may trigger the lockdep splat [1] due to dependency
on pcpu_alloc_mutex.
To resolve this, move the elevator data allocation and deallocation
logic from ->init_sched and ->exit_sched into the newly introduced
->alloc_sched_data and ->free_sched_data methods. These callbacks are
invoked before acquiring ->freeze_lock and ->elevator_lock, ensuring
that memory allocation happens safely without introducing additional
locking dependencies.
This change breaks the dependency chain involving pcpu_alloc_mutex and
prevents the reported lockdep warning.
Nilay Shroff [Thu, 13 Nov 2025 08:58:21 +0000 (14:28 +0530)]
block: use {alloc|free}_sched data methods
The previous patch introduced ->alloc_sched_data and
->free_sched_data methods. This patch builds upon that
by now using these methods during elevator switch and
nr_hw_queue update.
It's also ensured that scheduler-specific data is
allocated and freed through the new callbacks outside
of the ->freeze_lock and ->elevator_lock locking contexts,
thereby preventing any dependency on pcpu_alloc_mutex.
Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yu Kuai <yukuai@fnnas.com> Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nilay Shroff [Thu, 13 Nov 2025 08:58:20 +0000 (14:28 +0530)]
block: introduce alloc_sched_data and free_sched_data elevator methods
The recent lockdep splat [1] highlights a potential deadlock risk
involving ->elevator_lock and ->freeze_lock dependencies on -pcpu_alloc_
mutex. The trace shows that the issue occurs when the Kyber scheduler
allocates dynamic memory for its elevator data during initialization.
To address this, introduce two new elevator operation callbacks:
->alloc_sched_data and ->free_sched_data. The subsequent patch would
build upon these newly introduced methods to suppress lockdep splat[1].
Nilay Shroff [Thu, 13 Nov 2025 08:58:19 +0000 (14:28 +0530)]
block: move elevator tags into struct elevator_resources
This patch introduces a new structure, struct elevator_resources, to
group together all elevator-related resources that share the same
lifetime. As a first step, this change moves the elevator tag pointer
from struct elv_change_ctx into the new struct elevator_resources.
Additionally, rename blk_mq_alloc_sched_tags_batch() and
blk_mq_free_sched_tags_batch() to blk_mq_alloc_sched_res_batch() and
blk_mq_free_sched_res_batch(), respectively. Introduce two new wrapper
helpers, blk_mq_alloc_sched_res() and blk_mq_free_sched_res(), around
blk_mq_alloc_sched_tags() and blk_mq_free_sched_tags().
These changes pave the way for consolidating the allocation and freeing
of elevator-specific resources into common helper functions. This
refactoring improves encapsulation and prepares the code for future
extensions, allowing additional elevator-specific data to be added to
struct elevator_resources without cluttering struct elv_change_ctx.
Subsequent patches will extend struct elevator_resources to include
other elevator-related data.
Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yu Kuai <yukuai@fnnas.com> Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nilay Shroff [Thu, 13 Nov 2025 08:58:18 +0000 (14:28 +0530)]
block: unify elevator tags and type xarrays into struct elv_change_ctx
Currently, the nr_hw_queues update path manages two disjoint xarrays —
one for elevator tags and another for elevator type — both used during
elevator switching. Maintaining these two parallel structures for the
same purpose adds unnecessary complexity and potential for mismatched
state.
This patch unifies both xarrays into a single structure, struct
elv_change_ctx, which holds all per-queue elevator change context. A
single xarray, named elv_tbl, now maps each queue (q->id) in a tagset
to its corresponding elv_change_ctx entry, encapsulating the elevator
tags, type and name references.
This unification simplifies the code, improves maintainability, and
clarifies ownership of per-queue elevator state.
Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yu Kuai <yukuai@fnnas.com> Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 13 Nov 2025 16:18:19 +0000 (09:18 -0700)]
Merge branch 'bcache-updates-6.19' into for-6.19/block
Merge bcache updates from Coly for 6.19:
"The major change is from me, which is to remove useless discard
interface and code for cache device (not the backing device). And the
last patch about gc latency is a cooperative result from Robert Pang
(Google), Mingzhe Zou (Easystack) and me, by inspired from their
previous works, I compose the final version and Robert prvides positive
benchmark result.
Marco contributes 2 patches to improve the usage of per-cpu system
work queue. Gustavo contributes a patch to fix the not-at-end
flexible-array member warning by gcc14. And Qianfeng contributes a code
cleanup patch to remove redundant __GFP_NOWARN."
Link: https://lore.kernel.org/linux-block/20251113053630.54218-1-colyli@fnnas.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bcache-updates-6.19:
bcache: Avoid -Wflex-array-member-not-at-end warning
bcache: WQ_PERCPU added to alloc_workqueue users
bcache: replace use of system_wq with system_percpu_wq
bcache: remove redundant __GFP_NOWARN
bcache: reduce gc latency by processing less nodes and sleep less time
bcache: remove discard sysfs interface document
bcache: drop discard sysfs interface
bcache: remove discard code from alloc.c
bcache: get rid of discard code from journal
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warning:
drivers/md/bcache/bset.h:330:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER struct btree_iter_set stack_data[MAX_BSETS];
onto the FAM struct btree_iter::data[], while keeping the FAM and the start
of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's
intentionally placed immediately after the corresponding structures --no
blank line in between.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Marco Crivellari [Thu, 13 Nov 2025 05:36:29 +0000 (13:36 +0800)]
bcache: WQ_PERCPU added to alloc_workqueue users
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Marco Crivellari [Thu, 13 Nov 2025 05:36:28 +0000 (13:36 +0800)]
bcache: replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Thu, 13 Nov 2025 05:36:26 +0000 (13:36 +0800)]
bcache: reduce gc latency by processing less nodes and sleep less time
When bcache device is busy for high I/O loads, there are two methods to
reduce the garbage collection latency,
- Process less nodes in eac loop of incremental garbage collection in
btree_gc_recurse().
- Sleep less time between two full garbage collection in
bch_btree_gc().
This patch introduces to hleper routines to provide different garbage
collection nodes number and sleep intervel time.
- btree_gc_min_nodes()
If there is no front end I/O, return 128 nodes to process in each
incremental loop, otherwise only 10 nodes are returned. Then front I/O
is able to access the btree earlier.
- btree_gc_sleep_ms()
If there is no synchronized wait for bucket allocation, sleep 100 ms
between two incremental GC loop. Othersize only sleep 10 ms before
incremental GC loop. Then a faster GC may provide available buckets
earlier, to avoid most of bcache working threads from being starved by
buckets allocation.
The idea is inspired by works from Mingzhe Zou and Robert Pang, but much
simpler and the expected behavior is more predictable.
Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Robert Pang <robertpang@google.com> Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Thu, 13 Nov 2025 05:36:25 +0000 (13:36 +0800)]
bcache: remove discard sysfs interface document
This patch removes documents of bcache discard sysfs interface, it
drops discard related sections from,
- Documentation/ABI/testing/sysfs-block-bcache
- Documentation/admin-guide/bcache.rst
Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Thu, 13 Nov 2025 05:36:24 +0000 (13:36 +0800)]
bcache: drop discard sysfs interface
Since discard code is removed, now the sysfs interface to enable discard
is useless. This patch removes the corresponding sysfs entry, and remove
bool variable 'discard' from struct cache as well.
Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Thu, 13 Nov 2025 05:36:23 +0000 (13:36 +0800)]
bcache: remove discard code from alloc.c
Bcache allocator initially has no free space to allocate. Firstly it
does a garbage collection which is triggered by a cache device write
and fills free space into ca->free[] lists. The discard happens after
the free bucket is handled by garbage collection added into one of the
ca->free[] lists. But normally this bucket will be allocated out very
soon to requester and filled data onto it. The discard hint on this
bucket LBA range doesn't help SSD control to improve internal erasure
performance, and waste extra CPU cycles to issue discard bios.
This patch removes the almost-useless discard code from alloc.c.
Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Thu, 13 Nov 2025 05:36:22 +0000 (13:36 +0800)]
bcache: get rid of discard code from journal
In bcache journal there is discard functionality but almost useless in
reality. Because discard happens after a journal bucket is reclaimed,
and the reclaimed bucket is allocated for new journaling immediately.
There is no time for underlying SSD to use the discard hint for internal
data management.
The discard code in bcache journal doesn't bring any performance
optimization and wastes CPU cycles for issuing discard bios. Therefore
this patch gits rid of it from journal.c and journal.h.
Signed-off-by: Coly Li <colyli@fnnas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 13 Nov 2025 13:40:28 +0000 (22:40 +0900)]
dm: fix zone reset all operation processing
dm_zone_get_reset_bitmap() is used to generate a bitmap of the zones of
a zoned device target when a REQ_OP_ZONE_RESET_ALL request is being
processed. This bitmap is built by executing a zone report with a report
callback set to the function dm_zone_need_reset_cb() in struct
dm_report_zones_args. However, the cb callback pointer is not anymore
the same as the callback specified by callers of the
blkdev_report_zones() function. Rather, this is a DM internal callback
and report zones callback functions from blkdev_report_zones() are
passed using struct blk_report_zones_args, introduced with commit db9aed869f34 ("block: introduce disk_report_zone()").
This commit changed the DM main report zones callback handler function
dm_report_zones_cb() to call the new disk_report_zone() so that callback
functions from blkdev_report_zones() are executed, and this change
resulted in the DM internal dm_zone_need_reset_cb() callback function to
not be executed anymore, turning any REQ_OP_ZONE_RESET_ALL request into
a no-op.
Fix this by calling in dm_report_zones_cb() the DM internal cb function
specified in struct dm_report_zones_args.
Fixes: db9aed869f34 ("block: introduce disk_report_zone()"). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 13 Nov 2025 13:40:27 +0000 (22:40 +0900)]
block: fix NULL pointer dereference in disk_report_zones()
Commit 2284eec5053d ("block: introduce blkdev_get_zone_info()")
introduced the report_active field in struct blk_report_zones_args so
that open and closed zones can be reported with the condition
BLK_ZONE_COND_ACTIVE in the case of a cached report zone.
However, the args pointer to a struct blk_report_zones_args that is
passed to disk_report_zones() can be NULL, e.g. in the case of internal
report zones operations for device mapper zoned targets.
Fix disk_report_zones() to make sure to check that the args is not null
before updating a zone condition for cached zone reports.
Fixes: 2284eec5053d ("block: introduce blkdev_get_zone_info()") Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 13 Nov 2025 13:40:26 +0000 (22:40 +0900)]
block: fix NULL pointer dereference in blk_zone_reset_all_bio_endio()
For zoned block devices that do not need zone write plugs (e.g. most
device mapper devices that support zones), the disk hash table of zone
write plugs is NULL. For such devices, blk_zone_reset_all_bio_endio()
should not attempt to scan this has table as that causes a NULL pointer
dereference.
Fix this by checking that the disk does have zone write plugs using the
atomic counter. This is equivalent to checking for a non-NULL hash table
but has the advantage to also speed up the execution of
blk_zone_reset_all_bio_endio() for devices that do use zone write plugs
but do not have any plug in the hash table (e.g. a disk with only full
zones).
Fixes: efae226c2ef1 ("block: handle zone management operations completions") Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Tue, 11 Nov 2025 23:29:02 +0000 (15:29 -0800)]
blk-zoned: Move code from disk_zone_wplug_add_bio() into its caller
Move the following code into the only caller of disk_zone_wplug_add_bio():
- The code for clearing the REQ_NOWAIT flag.
- The code that sets the BLK_ZONE_WPLUG_PLUGGED flag.
- The disk_zone_wplug_schedule_bio_work() call.
This patch moves all code that is related to REQ_NOWAIT or to bio
scheduling into a single function. Additionally, the 'schedule_bio_work'
variable is removed. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlmoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 12 Nov 2025 16:42:18 +0000 (08:42 -0800)]
null_blk: fix zone read length beyond write pointer
Fix up the divisor calculating the number of zone sectors being read and
handle a read that straddles the zone write pointer. The length is
rounded up a sector boundary, so be sure to truncate any excess bytes
off to avoid copying past the data segment.
Kriish Sharma [Tue, 11 Nov 2025 11:58:10 +0000 (11:58 +0000)]
blk-mq-dma: fix kernel-doc function name for integrity DMA iterator
Documentation build reported:
Warning: block/blk-mq-dma.c:373 expecting prototype for blk_rq_integrity_dma_map_iter_start(). Prototype was for blk_rq_integrity_dma_map_iter_next() instead
The kernel-doc comment above `blk_rq_integrity_dma_map_iter_next()` used
the wrong function name (`blk_rq_integrity_dma_map_iter_start`) in its
header. This patch corrects the function name in the kernel-doc block to
match the actual implementation, ensuring clean documentation builds.
ublk_map_io() and ublk_unmap_io() never return negative values, and
their return values are stored in variables of type unsigned. Clarify
that they can't fail by making their return types unsigned.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk: remove unnecessary checks in ublk_check_and_get_req()
ub = iocb->ki_filp->private_data cannot be NULL, as it's set in
ublk_ch_open() before it returns succesfully. req->mq_hctx cannot be
NULL as any inflight ublk request must belong to some queue. And
req->mq_hctx->driver_data cannot be NULL as it's set to the ublk_queue
pointer in ublk_init_hctx(). So drop the unnecessary checks.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 11 Nov 2025 13:58:11 +0000 (06:58 -0700)]
Merge tag 'md-6.19-20251111' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into for-6.19/block
Pull MD changes from Yu:
"- Change maintainer's email address (Yu Kuai)
- Data can be lost if array is created with different lbs devices, fix
this problem and record lbs of the array in metadata (Li Nan)
- Fix rcu protection for md_thread (Yun Zhou)
- Fix mddev kobject lifetime regression (Xiao Ni)
- Enable atomic writes for md-linear (John Garry)
- Some cleanups (Chen Ni, Huiwen He, Wu Guanghao)"
* tag 'md-6.19-20251111' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: allow configuring logical block size
md: add check_new_feature module parameter
md/raid0: Move queue limit setup before r0conf initialization
md: init bioset in mddev_init
md: delete md_redundancy_group when array is becoming inactive
md: prevent adding disks with larger logical_block_size to active arrays
md/raid5: remove redundant __GFP_NOWARN
md: avoid repeated calls to del_gendisk
md/md-llbitmap: Remove unneeded semicolon
md/md-linear: Enable atomic writes
Factor out code into md_should_do_recovery()
md: fix rcu protection in md_wakeup_thread
md: delete mddev kobj before deleting gendisk kobj
MAINTAINERS: Update Yu Kuai's E-mail address
Li Nan [Mon, 3 Nov 2025 12:57:57 +0000 (20:57 +0800)]
md: allow configuring logical block size
Previously, raid array used the maximum logical block size (LBS)
of all member disks. Adding a larger LBS disk at runtime could
unexpectedly increase RAID's LBS, risking corruption of existing
partitions. This can be reproduced by:
```
# LBS of sd[de] is 512 bytes, sdf is 4096 bytes.
mdadm -CRq /dev/md0 -l1 -n3 /dev/sd[de] missing --assume-clean
# LBS is 512
cat /sys/block/md0/queue/logical_block_size
# partition lost
partprobe /dev/md0
lsblk | grep md0p1
```
Simply restricting larger-LBS disks is inflexible. In some scenarios,
only disks with 512 bytes LBS are available currently, but later, disks
with 4KB LBS may be added to the array.
Making LBS configurable is the best way to solve this scenario.
After this patch, the raid will:
- store LBS in disk metadata
- add a read-write sysfs 'mdX/logical_block_size'
Future mdadm should support setting LBS via metadata field during RAID
creation and the new sysfs. Though the kernel allows runtime LBS changes,
users should avoid modifying it after creating partitions or filesystems
to prevent compatibility issues.
Only 1.x metadata supports configurable LBS. 0.90 metadata inits all
fields to default values at auto-detect. Supporting 0.90 would require
more extensive changes and no such use case has been observed.
Note that many RAID paths rely on PAGE_SIZE alignment, including for
metadata I/O. A larger LBS than PAGE_SIZE will result in metadata
read/write failures. So this config should be prevented.
Li Nan [Mon, 3 Nov 2025 12:57:55 +0000 (20:57 +0800)]
md/raid0: Move queue limit setup before r0conf initialization
Prepare for making logical blocksize configurable. This change has no
impact until logical block size becomes configurable.
Move raid0_set_limits() before create_strip_zones(). It is safe as fields
modified in create_strip_zones() do not involve mddev configuration, and
rdev modifications there are not used in raid0_set_limits().
'blksize' in create_strip_zones() fetches mddev's logical block size,
which is already the maximum aross all rdevs, so the later max() can be
removed.
Li Nan [Mon, 3 Nov 2025 12:57:54 +0000 (20:57 +0800)]
md: init bioset in mddev_init
IO operations may be needed before md_run(), such as updating metadata
after writing sysfs. Without bioset, this triggers a NULL pointer
dereference as below:
Li Nan [Mon, 3 Nov 2025 12:57:53 +0000 (20:57 +0800)]
md: delete md_redundancy_group when array is becoming inactive
'md_redundancy_group' are created in md_run() and deleted in del_gendisk(),
but these are not paired. Writing inactive/active to sysfs array_state can
trigger md_run() multiple times without del_gendisk(), leading to
duplicate creation as below:
Creation of it depends on 'pers', its lifecycle cannot be aligned with
gendisk. So fix this issue by triggering 'md_redundancy_group' deletion
when the array is becoming inactive.
Li Nan [Thu, 18 Sep 2025 11:57:58 +0000 (19:57 +0800)]
md: prevent adding disks with larger logical_block_size to active arrays
When adding a disk to a md array, avoid updating the array's
logical_block_size to match the new disk. This prevents accidental
partition table loss that renders the array unusable.
The later patch will introduce a way to configure the array's
logical_block_size.
Zheng Qixing [Sat, 8 Nov 2025 07:02:02 +0000 (15:02 +0800)]
nbd: defer config put in recv_work
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Reported-by: syzbot+56fbf4c7ddf65e95c7cc@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6907edce.a70a0220.37351b.0014.GAE@google.com/T/ Fixes: 87aac3a80af5 ("nbd: make the config put is called before the notifying the waiter")
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") Signed-off-by: Zheng Qixing <zhengqixing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Huiwen He [Sun, 2 Nov 2025 15:25:40 +0000 (23:25 +0800)]
md/raid5: remove redundant __GFP_NOWARN
The __GFP_NOWARN flag was included in GFP_NOWAIT since commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT"). So
remove the redundant __GFP_NOWARN flag.
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition.
Link: https://lore.kernel.org/linux-raid/20251029063419.21700-1-xni@redhat.com Fixes: 9e59d609763f ("md: call del_gendisk in control path") Signed-off-by: Xiao Ni <xni@redhat.com> Suggested-by: Yu Kuai <yukuai@fnnas.com> Reviewed-by: Li Nan <linan122@huawei.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
John Garry [Wed, 3 Sep 2025 16:10:52 +0000 (16:10 +0000)]
md/md-linear: Enable atomic writes
All the infrastructure has already been plumbed to support this for
stacked devices, so just enable the request_queue limits features flag.
A note about chunk sectors for linear arrays:
While it is possible to set a chunk sectors param for building a linear
array, this is for specifying the granularity at which data sectors from
the device are used. It is not the same as a stripe size, like for RAID0.
As such, it is not appropriate to set chunk_sectors request queue limit to
the same value, as chunk_sectors request limit is a boundary for which
requests cannot straddle.
However, request_queue limit max_hw_sectors is set to chunk sectors, which
almost has the same effect as setting chunk_sectors limit.
Yun Zhou [Wed, 15 Oct 2025 08:32:27 +0000 (16:32 +0800)]
md: fix rcu protection in md_wakeup_thread
We attempted to use RCU to protect the pointer 'thread', but directly
passed the value when calling md_wakeup_thread(). This means that the
RCU pointer has been acquired before rcu_read_lock(), which renders
rcu_read_lock() ineffective and could lead to a use-after-free.
Xiao Ni [Sun, 28 Sep 2025 01:24:24 +0000 (09:24 +0800)]
md: delete mddev kobj before deleting gendisk kobj
In sync del gendisk path, it deletes gendisk first and the directory
/sys/block/md is removed. Then it releases mddev kobj in a delayed work.
If we enable debug log in sysfs_remove_group, we can see the debug log
'sysfs group bitmap not found for kobject md'. It's the reason that the
parent kobj has been deleted, so it can't find parent directory.
In creating path, it allocs gendisk first, then adds mddev kobj. So it
should delete mddev kobj before deleting gendisk.
Before commit 9e59d609763f ("md: call del_gendisk in control path"), it
releases mddev kobj first. If the kobj hasn't been deleted, it does clean
job and deletes the kobj. Then it calls del_gendisk and releases gendisk
kobj. So it doesn't need to call kobject_del to delete mddev kobj. After
this patch, in sync del gendisk path, the sequence changes. So it needs
to call kobject_del to delete mddev kobj.
After this patch, the sequence is:
1. kobject del mddev kobj
2. del_gendisk deletes gendisk kobj
3. mddev_delayed_delete releases mddev kobj
4. md_kobj_release releases gendisk kobj
Damien Le Moal [Fri, 7 Nov 2025 06:38:44 +0000 (15:38 +0900)]
block: introduce bdev_zone_start()
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Fri, 7 Nov 2025 06:38:43 +0000 (15:38 +0900)]
block: refactor disk_zone_wplug_sync_wp_offset()
The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Fri, 7 Nov 2025 06:38:42 +0000 (15:38 +0900)]
block: improve blk_zone_wp_offset()
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: don't return 1 for the fallback case in blkdev_get_zone_info
blkdev_do_report_zones returns the number of reported zones, but
blkdev_get_zone_info returns 0 or an errno. Translate to the expected
return value in blkdev_report_zone_fallback.
Fixes: b037d41762fd ("block: introduce blkdev_get_zone_info()") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 14 Oct 2025 15:04:56 +0000 (08:04 -0700)]
nvme: remove virtual boundary for sgl capable devices
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.
Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 14 Oct 2025 15:04:55 +0000 (08:04 -0700)]
block: accumulate memory segment gaps per bio
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cong Zhang [Tue, 21 Oct 2025 11:07:56 +0000 (19:07 +0800)]
virtio_blk: NULL out vqs to avoid double free on failed resume
The vblk->vqs releases during freeze. If resume fails before vblk->vqs
is allocated, later freeze/remove may attempt to free vqs again.
Set vblk->vqs to NULL after freeing to avoid double free.
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:47 +0000 (17:54 -0800)]
null_blk: allow byte aligned memory offsets
Allowing byte aligned memory provides a nice testing ground for
direct-io.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:46 +0000 (17:54 -0800)]
null_blk: single kmap per bio segment
Rather than kmap the the request bio segment for each sector, do
the mapping just once.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:45 +0000 (17:54 -0800)]
null_blk: consistently use blk_status_t
No need to mix errno and blk_status_t error types. Just use the standard
block layer type.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:44 +0000 (17:54 -0800)]
null_blk: simplify copy_from_nullb
It always returns success, so the code that saves the errors status, but
proceeds without checking it looks a bit odd. Clean this up.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_advance_io_iter() and ublk_copy_io_pages() currently open-code the
iteration over the request's bvecs. Switch to the rq_for_each_segment()
macro provided by blk-mq to avoid reaching into the bio internals and
simplify the code.
Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_copy_user_pages()/ublk_copy_io_pages() currently uses
iov_iter_get_pages2() to extract the pages from the iov_iter and
memcpy()s between the bvec_iter and the iov_iter's pages one at a time.
Switch to using copy_to_iter()/copy_from_iter() instead. This avoids the
user page reference count increments and decrements and needing to split
the memcpy() at user page boundaries. It also simplifies the code
considerably.
Ming reports a 40% throughput improvement when issuing I/O to the
selftests null ublk server with zero-copy disabled.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: fix cached zone reporting after zone append was used
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4ab7 ("block: introduce blkdev_report_zones_cached()") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: don't leak disk->zones_cond for !disk_need_zone_resources
disk->zones_cond is allocated for all zoned devices, but
disk_free_zone_resources skips it when the zone write plug hash is not
allocated, leaking the allocation for non-mq devices that don't emulate
zone append. This is reported by kmemleak-enabled xfstests for various
tests that use simple device mapper targets.
Fix this by moving all code that requires writes plugs from
disk_free_zone_resources into disk_destroy_zone_wplugs_hash_table
and executing the rest of the code, including the disk->zones_cond
freeing unconditionally.
Fixes: 6e945ffb6555 ("block: use zone condition to determine conventional zones") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 5 Nov 2025 15:07:41 +0000 (08:07 -0700)]
Merge branch 'cached-zones' into for-6.19/block
This patch series implements a cached report zones using information
from the block layer zone write plugs and a new zone condition tracking.
This avoids having to execute slow report zones commands on the device
when for instance mounting file systems, which can significantly speed
things up, especially in setups with multiple SMR HDDs (e.g. a BTRFS
RAID volume).
The first patch improves handling of zone management commands. Patch 2
fixes zone resource updates and the following 3 patches cleanup the zone
code in preparation for introducing cached zone report support.
From patch 6 to 13, cached report zones is implemented and made
available to users with a new ioctl() command.
Finally, patches 14 and 15 introduce the use of cached report zones in
the mount operation of XFS and BTRFS.
Link: https://lore.kernel.org/linux-block/20251104212249.1075412-1-dlemoal@kernel.org/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* cached-zones:
xfs: use blkdev_report_zones_cached()
btrfs: use blkdev_report_zones_cached()
block: add zone write plug condition to debugfs zone_wplugs
block: improve zone_wplugs debugfs attribute output
block: introduce BLKREPORTZONESV2 ioctl
block: introduce blkdev_report_zones_cached()
block: introduce blkdev_get_zone_info()
block: refactor blkdev_report_zones() code
block: track zone conditions
block: use zone condition to determine conventional zones
block: reorganize struct blk_zone_wplug
block: introduce disk_report_zone()
block: cleanup blkdev_report_zones()
block: freeze queue when updating zone resources
block: handle zone management operations completions
Damien Le Moal [Tue, 4 Nov 2025 21:22:49 +0000 (06:22 +0900)]
xfs: use blkdev_report_zones_cached()
Modify xfs_mount_zones() to replace the call to blkdev_report_zones()
with blkdev_report_zones_cached() to speed-up mount operations.
Since this causes xfs_zone_validate_seq() to see zones with the
BLK_ZONE_COND_ACTIVE condition, this function is also modified to acept
this condition as valid.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 2s compared to over 4.7s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:48 +0000 (06:22 +0900)]
btrfs: use blkdev_report_zones_cached()
Modify btrfs_get_dev_zones() and btrfs_sb_log_location_bdev() to replace
the call to blkdev_report_zones() with blkdev_report_zones_cached() to
speed-up mount operations. btrfs_get_dev_zone_info() is also modified to
take into account the BLK_ZONE_COND_ACTIVE condition, which is
equivalent to either BLK_ZONE_COND_IMP_OPEN, BLK_ZONE_COND_EXP_OPEN or
BLK_ZONE_COND_CLOSED.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 100ms compared to over 1.8s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:47 +0000 (06:22 +0900)]
block: add zone write plug condition to debugfs zone_wplugs
Modify queue_zone_wplug_show() to include the condition of a zone write
plug to the zone_wplugs debugfs attribute of a zoned block device.
To improve readability and ease of use, rather than the zone condition
raw value, the zone condition name is given using blk_zone_cond_str().
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the output of the zone_wplugs debugfs attribute file more easily
readable by adding the name of the zone write plugs fields in the
output.
No functional changes.
Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:45 +0000 (06:22 +0900)]
block: introduce BLKREPORTZONESV2 ioctl
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:44 +0000 (06:22 +0900)]
block: introduce blkdev_report_zones_cached()
Introduce the function blkdev_report_zones_cached() to provide a fast
report zone built using the blkdev_get_zone_info() function, which gets
zone information from a disk zones_cond array or zone write plugs.
For a large capacity SMR drive, such fast report zone can be completed
in a few milliseconds compared to several seconds completion times
when the report zone is obtained from the device.
The zone report is built in the same manner as with the regular
blkdev_report_zones() function, that is, the first zone reported is the
one containing the specified start sector and the report is limited to
the specified number of zones (nr_zones argument). The information for
each zone in the report is obtained using blkdev_get_zone_info().
For zoned devices that do not use zone write plug resources,
using blkdev_get_zone_info() is inefficient as the zone report would
be very slow, generated one zone at a time. To avoid this,
blkdev_report_zones_cached() falls back to calling
blkdev_do_report_zones() to execute a regular zone report. In this case,
the .report_active field of struct blk_report_zones_args is set to true
to report zone conditions using the BLK_ZONE_COND_ACTIVE condition in
place of the implicit open, explicit open and closed conditions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:43 +0000 (06:22 +0900)]
block: introduce blkdev_get_zone_info()
Introduce the function blkdev_get_zone_info() to obtain a single zone
information from cached zone data, that is, either from the zone write
plug for the target zone if it exists and from the disk zones_cond
array otherwise.
Since sequential zones that do not have a zone write plug are either
full, empty or in a bad state (read-only or offline), the zone write
pointer can be inferred from the zone condition cached in the disk
zones_cond array. For sequential zones that have a zone write plug, the
zone condition and zone write pointer are obtained from the condition
and write pointer offset managed with the zone write plug. This allows
obtaining the information for a zone much more quickly than having to
execute a report zones command on the device.
blkdev_get_zone_info() falls back to using a regular zone report if the
target zone is flagged as needing an update with the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag, or if the target device does not
use zone write plugs (i.e. a device mapper device). In this case, the
new function blkdev_report_zone_fallback() is used and the zone
condition is reported consistantly with the cahced report, that is, the
BLK_ZONE_COND_ACTIVE condition is used in place of the implicit open,
explicit open and closed conditions. This is achieved by adding the
.report_active field to struct blk_report_zones_args and by having
disk_report_zone() sets the correct zone condition if .report_active is
true.
In preparation for using blkdev_get_zone_info() in upcoming file systems
changes, also export this function as a GPL symbol.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:42 +0000 (06:22 +0900)]
block: refactor blkdev_report_zones() code
In preparation for implementing cached report zone, split the main part
of the code of blkdev_report_zones() into the helper function
blkdev_do_report_zones(), with this new helper taking as argument a
struct blk_report_zones_args pointer instead of a report callback
function and its private argument.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:41 +0000 (06:22 +0900)]
block: track zone conditions
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:40 +0000 (06:22 +0900)]
block: use zone condition to determine conventional zones
The conv_zones_bitmap field of struct gendisk is used to define a bitmap
to identify the conventional zones of a zoned block device. The bit for
a zone is set in this bitmap if the zone is a conventional one, that is,
if the zone type is BLK_ZONE_TYPE_CONVENTIONAL. For such zone, this
always corresponds to the zone condition BLK_ZONE_COND_NOT_WP.
In other words, conv_zones_bitmap tracks a single condition of the
zones of a zoned block device.
In preparation for tracking more zone conditions, change
conv_zones_bitmap into an array of zone conditions, using 1 byte per
zone. This increases the memory usage from 1 bit per zone to 1 byte per
zone, that is, from 16 KiB to about 100 KiB for a 30 TB SMR HDD with 256
MiB zones. This is a trade-off to allow fast cached report zones later
on top of this change.
Rename the conv_zones_bitmap field of struct gendisk to zones_cond. Add
a blk_revalidate_zone_cond() function to initialize the zones_cond array
of a disk during device scan and to update it on device revalidation.
Move the allocation of the zones_cond array to
disk_revalidate_zone_resources(), making sure that this array is always
allocated, even for devices that do not need zone write plugs (zone
resources), to ensure that bdev_zone_is_seq() can be re-implemented to
use the zone condition array in place of the conv zones bitmap.
Finally, the function bdev_zone_is_seq() is rewritten to use a test on
the condition of the target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:39 +0000 (06:22 +0900)]
block: reorganize struct blk_zone_wplug
Reorganize the fields of struct blk_zone_wplug to remove a hole after
the wp_offset field and avoid having the bio_work structure split
between 2 cache lines.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:38 +0000 (06:22 +0900)]
block: introduce disk_report_zone()
Commit b76b840fd933 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:37 +0000 (06:22 +0900)]
block: cleanup blkdev_report_zones()
The variable capacity is used only in one place and so can be removed
and get_capacity(disk) used directly instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:36 +0000 (06:22 +0900)]
block: freeze queue when updating zone resources
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b444a ("block: Prevent potential deadlock in blk_revalidate_disk_zones()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:35 +0000 (06:22 +0900)]
block: handle zone management operations completions
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
projects / thirdparty / linux.git / log
