libsframe: Add test for PLT0 and PLTN with only one FRE each
On s390x the PLT0 and PLTN entries are described with one SFrame FRE
each. Add a test case for this particularity.
libsframe/testsuite/
* libsframe.find/find.exp (plt-findfre-2): Add new test.
* libsframe.find/plt-findfre-2.c: New test for PLT0 and PLTN
with only one FRE each.
* libsframe.find/local.mk (plt-findfre-2): Add new test.
s390: Add SFrame stack trace information for .plt section
Enable SFrame stack tracing through PLT entries. Based on x86-64.
On s390x both PLT0 and PLTn entries are 32-bytes in size. Their code
neither alters the stack pointer (SP), frame pointer (FP), nor return
address (RA) registers. Therefore the PLT0 can be represented using
a SFrame FDE of type PCINC with a single SFrame FRE and the PLTn can
be represented using a SFrame FDE of type PCMASK, with a repetition
block size of 32 (PLTn size), and a single SFrame FRE.
Note that as both the PLT0 entry and the PLTn entries have equal size
and could both be represented using the identical SFrame FRE, the whole
.plt section on s390x could be represented using a single SFrame FDE of
type PCMASK, with a repetition block size of 32 (PLT0 and PLTn size),
and a single SFrame FRE. Keep the x86-64 logic with separate SFrame
FDEs for PLT0 and PLTn, to ease potential generalization of the .sframe
for .plt generation logic among architectures.
bfd/
* elf64-s390.c: Include sframe.h and sframe-api.h.
(PLT_SFRAME_FDE_START_OFFSET, SFRAME_PLT0_MAX_NUM_FRES,
SFRAME_PLTN_MAX_NUM_FRES, elf_s390x_sframe_plt_fre,
elf_s390x_sframe_plt): New .sframe template for .plt section.
(elf_s390_link_hash_table): Add plt_cfe_ctx, plt_sframe, and
sframe_plt fields.
(_bfd_s390_elf_create_sframe_plt): New function. Fill in
.sframe section for .plt section.
(_bfd_s390_elf_write_sframe_plt): New function. Write .sframe
section.
(elf_s390_create_dynamic_sections): Create .sframe section for
.plt section.
(elf_s390_late_size_sections): Call
_bfd_s390_elf_create_sframe_plt and
_bfd_s390_elf_write_sframe_plt.
(elf_s390_finish_dynamic_sections): Write .plt section start
into .sframe FDE covering .plt section. Call
_bfd_elf_merge_section_sframe on htab->plt_sframe.
ld/
* NEWS: Add news entry.
ld/testsuite/
* ld-s390/s390.exp: Add new test.
* ld-s390/sframe-plt-1.d: New linker-generated .sframe for .plt
test.
* ld-s390/sframe-simple-1.d: Adjust expected test output due to
linker-generated .sframe for .plt.
If an architecture uses both SFrame RA and FP tracking SFrame assumes
that the RA offset is the 2nd offset and the FP offset is the 3rd offset
following a SFrame FRE. An architecture does not necessarily need to
save both on the stack (or in register) at the same time or even at all.
SFrame cannot represent FP without RA saved on stack (or in a register),
since it cannot distinguish whether the 2nd offset is the RA or FP
offset.
For s390x use an invalid SFrame RA offset from CFA value of zero as
padding to represent the FP being saved when the RA is not saved. This
aligns with the existing invalid SFrame fixed RA offset from CFA value
of zero. In a stack tracer this then also naturally falls into place,
as it can skip restoring the RA in the topmost frame, if both the fixed
RA offset (from SFrame header) and the RA offset (from FDE) are zero,
without any need to test architecture-specific flags.
include/
* sframe.h (SFRAME_FRE_RA_OFFSET_INVALID): New define. Used as
padding offset.
* sframe-api.h (sframe_fre_get_ra_offset): Add comment that for
s390x an offset value of SFRAME_FRE_RA_OFFSET_INVALID indicates
that the RA is not saved.
gas/
* gen-sframe.c (get_fre_num_offsets): For s390x account padding
RA offset, if FP without RA saved.
(sframe_get_fre_offset_size): Likewise.
(output_sframe_row_entry): For s390x write a padding RA offset,
if FP without RA needs to be represented.
(sframe_do_fde): Enable FP without RA saved to be represented
on s390x.
libsframe/
* sframe.c (sframe_fre_get_ra_offset): Add comment that for
s390x an offset value of SFRAME_FRE_RA_OFFSET_INVALID indicates
that the RA is not saved.
* sframe-dump.c (dump_sframe_func_with_fres): Treat invalid
RA offsets as if they were undefined. Display them as "U"
to distinguish them.
* doc/sframe-spec.texi (s390x): Document s390x-specific use of
SFRAME_FRE_RA_OFFSET_INVALID to represent FP without RA saved.
GCC on s390x, when in a leaf function, can be observed to save the
frame pointer (FP) and/or return address (RA) register in a floating-
point registers (FPR) instead of on the stack. This is declared using
the following CFI directive:
.cfi_register <fp/ra-regnum>, <fpr-regnum>
SFrame cannot represent the FP and/or RA being saved in another
register. It does only track the CFA base register (SP/FP), CFA offset
from CFA base register, and FP and RA save area offsets from CFA.
On s390x the FP and/or RA are only saved in another FPR when in a leaf
function. That is a function that does not call any other function.
Therefore it can ever only be the topmost function in a call chain.
An unwinder by default has access to all registers of the function that
is the topmost on the call stack. Therefore no further information
is required to restore FP/RA from the FPR.
Represent FP/RA saved in another register on s390x, by encoding the
DWARF register number shifted by one to the left with the least-
significant bit set in the offset as follows:
offset = (regnum << 1) | 1
The use of the least-significant bit of the offset as indication is
possible, as the stack pointer (SP), the CFA, and any register save
area slots are 8-byte aligned according to the s390x ELF ABI:
- The stack pointer (SP) "shall maintain an 8-byte alignment". [1]
- The CFA is defined as SP at call site +160. [2]
- Pointers and 8-byte integers, such as general register values, must
be 8-byte aligned. [3]
SFrame FP and RA stack offsets must therefore always be a multiple of
8 on s390x. Note that for the same reason the DWARF data alignment
factor is -8 on s390x (see DWARF2_CIE_DATA_ALIGNMENT).
Add s390x-specific SFrame (error) tests for FP/RA saved in FPRs in leaf
function.
include/
* sframe.h (SFRAME_V2_S390X_OFFSET_IS_REGNUM): New s390x-
specific macro to test whether an SFrame FP/RA offset is a DWARF
register number.
(SFRAME_V2_S390X_OFFSET_ENCODE_REGNUM): New s390x-specific macro
to encode a DWARF register number into an SFrame FP/RA offset.
(SFRAME_V2_S390X_OFFSET_DECODE_REGNUM): New s390x-specific macro
to decode an SFrame FP/RA offset into a DWARF register number.
* sframe-api.h (sframe_fre_get_fp_offset,
sframe_fre_get_fp_offset): Add comment that for s390x the offset
may be an encoded register number.
gas/
* gen-sframe.c (s390_sframe_xlate_do_register): New S390-
specific function. Uses SFRAME_V2_S390X_OFFSET_ENCODE_REGNUM to
represent FP/RA saved in another register on s390x.
(sframe_xlate_do_register): Invoke s390_sframe_xlate_do_register
on s390x.
libsframe/
* sframe.c (sframe_fre_get_fp_offset, sframe_fre_get_fp_offset):
Add comment that for s390x the offset may be an encoded register
number.
* sframe-dump.c (is_sframe_abi_arch_s390x): New helper to test
whether ABI/arch is s390x.
(dump_sframe_func_with_fres): Use
SFRAME_V2_S390X_OFFSET_IS_REGNUM and
SFRAME_V2_S390X_OFFSET_DECODE_REGNUM to dump FP/RA saved in
another register on s390x.
* doc/sframe-spec.texi (s390x): Document s390x-specific
representation of FP/RA saved in another register.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe.exp: Update s390x-specific SFrame
(error) tests.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-2.s: Rename
to ...
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-2.d:
Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-1.s: This. Test
no longer triggers a warning, as SFrame can represent FP and RA
saved in registers.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-1.d: Test
now triggers a different warning, as SFrame can represent FP and
RA saved in registers, but not FP without RA saved in register.
s390: Initial support to generate .sframe from CFI directives in assembler
This introduces initial support to generate .sframe from CFI directives
in assembler on s390 64-bit (s390x). Due to SFrame V2 format
limitations it has the following limitations, some of them getting
addressed by subsequent patches, which cause generation of SFrame FDE
to be skipped:
- SFrame FP/RA tracking only supports register contents being saved on
the stack (i.e. .cfi_offset). It does not support FP/RA register
contents being saved in other registers (i.e. .cfi_register). GCC on
s390x can be observed to save the FP/RA register contents in floating-
point registers, but only in leaf functions.
This issue is detailed further and resolved in the subsequent commit
"s390: Represent FP/RA saved in register in SFrame".
- SFrame FP/RA tracking cannot represent FP without RA saved. This is
because the format assumes SFrame FDE offset2 to be the RA offset, if
there are two offsets, and offset3 to be the FP offset, if there are
three offsets. There is no mean to distinguish whether offset2 is the
RA or FP offset, if there are only two offsets.
This issue is detailed further and resolved in the subsequent commit
"s390: Represent FP without RA saved in SFrame".
- SFrame assumes a dedicated FP register number. The s390x ELF ABI [1]
does only designate register 11 as preferred FP register number. In
general GCC and Clang on s390x use register 11 as frame pointer.
GCC on s390x can be observed to use register 14 as frame pointer in
the stack clash protector in the function prologue.
glibc on s390x contains hand-written assembler code that uses
register 12 as frame pointer.
This s390x support is largely based on the AArch64 support from commit b52c4ee46657 ("gas: generate .sframe from CFI directives").
The SFrame ABI/arch identifier SFRAME_ABI_S390X_ENDIAN_BIG is introduced
for s390x and added to the SFrame format specification.
The s390x ELF ABI [1] specifies the following C calling conventions for
s390x architecture:
- Register 15 is the stack pointer (SP).
- Register 14 contains the return address (RA) at function entry.
- There is no dedicated frame pointer register. Register 11 is the
preferred frame pointer (FP). [2] GCC and Clang in general use
register 11 as frame pointer.
- The CFA is defined as SP at call site +160. [3] The SP at call site
can therefore be derived from the CFA using a SP value offset from CFA
of -160.
The s390x ELF ABI [1] does not assign any standard save slot to each
register in the register save area of a stack frame. Neither the
return address (RA, r14) nor preferred frame pointer (FP, r11)
necessarily need to be saved. Therefore SFrame RA and FP tracking is
used.
Support for SFrame on s390 is only enabled for the 64-bit s390x ELF ABI
(z/Architecture with 64-bit addressing mode). It is disabled for the
32-bit s390 ELF ABI (ESA/390 or z/Architecture with 32-bit addressing
mode).
s390x-specific SFrame assembler and linker tests are added, including
error tests for use of a non-preferred frame pointer (FP) register and
specification of a non-default return address (RA) register.
[1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases
[2]: s390x ELF ABI, commit f00421825979 ("Add information about the frame
pointer register"),
https://github.com/IBM/s390x-abi/commit/f00421825979
[3]: s390x ELF ABI, commit 4e38ad9c8a88 ("Document the CFA"),
https://github.com/IBM/s390x-abi/commit/4e38ad9c8a88
include/
* sframe.h: Add reference to s390x architecture in comments.
(SFRAME_ABI_S390X_ENDIAN_BIG): Define SFrame ABI/arch identifier
for s390x.
(SFRAME_S390X_SP_VAL_OFFSET): Define s390x-specific SP value
offset from CFA.
libsframe/
* sframe.c (need_swapping): Add SFRAME_ABI_S390X_ENDIAN_BIG.
* doc/sframe-spec.texi (SFRAME_ABI_S390X_ENDIAN_BIG, s390x,
SFRAME_S390X_SP_VAL_OFFSET): Document SFrame ABI/arch identifier
for s390x, add references to s390x architecture, and document
s390x-specifics, such as the SP value offset from CFA of -160.
gas/
* config/tc-s390.h: s390x support to generate .sframe from CFI
directives in assembler.
(support_sframe_p): Define.
(SFRAME_CFA_SP_REG, SFRAME_CFA_FP_REG, SFRAME_CFA_RA_REG):
Define.
(sframe_ra_tracking_p): Define.
(sframe_cfa_ra_offset): Define.
(sframe_get_abi_arch): Define.
* config/tc-s390.c: s390x support to generate .sframe from CFI
directives in assembler.
(s390_sframe_cfa_sp_reg, s390_sframe_cfa_fp_reg,
s390_sframe_cfa_ra_reg): New. Initialize to DWARF register
numbers of stack pointer (SP, r15), preferred frame pointer
(FP, r11), and return address (RA, r14) registers.
(s390_support_sframe_p): New function. Return true if s390x.
(s390_sframe_ra_tracking_p): New function. Return true.
(s390_sframe_cfa_ra_offset): New function. Return
SFRAME_CFA_FIXED_RA_INVALID.
(s390_sframe_get_abi_arch): New function. Return
SFRAME_ABI_S390X_ENDIAN_BIG if s390x, otherwise zero.
* gen-sframe.c: Add reference to s390x architecture in comments.
(sframe_xlate_do_val_offset): Add support for s390x-specific
SFRAME_S390X_SP_VAL_OFFSET.
* NEWS: Add news entry.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe.exp: Enable common SFrame tests for
s390x. Add s390x-specific SFrame (error) tests.
* gas/cfi-sframe/cfi-sframe-s390x-1.d: New s390x-specific SFrame
test.
* gas/cfi-sframe/cfi-sframe-s390x-1.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-2.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-err-1.d: New s390x-specific
SFrame error test that uses a non-default frame-pointer register
as CFA base register.
* gas/cfi-sframe/cfi-sframe-s390x-err-1.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-err-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-err-2.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-err-3.d: New s390x-specific
SFrame error test that uses a non-default return address
register.
* gas/cfi-sframe/cfi-sframe-s390x-err-3.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-offset-1.d: New s390x-
specific SFrame test that saves RA and FP individually on the
stack.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-offset-1.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-offset-err-1.d: New
s390x-specific SFrame error test that saves FP and RA
individually, to trigger FP without RA saved.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-offset-err-1.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-1.d: New
s390x-specific SFrame error test that saves FP and RA
individually in registers.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-1.s:
Likewise.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-2.d: New
s390x-specific SFrame error test that saves RA and FP
individually in registers.
* gas/cfi-sframe/cfi-sframe-s390x-fpra-register-err-2.s:
Likewise.
Generating the linker dump test list using file globbing makes it
difficult to exclude specific tests under certain circumstances. List
them explicitly instead. This enables to add tests in the future that
can be excluded. While at it reorganize how s390 linker tests get
run for s390x.
ld/testsuite/
* ld-s390/s390.exp: Reorganize and explicitly list linker dump
tests.
sframe: Ignore section padding when converting endianness
The .sframe section may have a trailing padding due to the architecture-
specific default section alignment. Do not treat this padding as error
when converting between target and host endianness.
This can be observed when building Binutils with SFrame s390x support on
x86-64 for s390x using configure option "--target=s390x-ibm-linux-gnu"
and running the GAS test suite.
While at it reuse the determined SFrame section header size.
Alan Modra [Thu, 10 Jul 2025 21:25:43 +0000 (06:55 +0930)]
AM_PO_SUBDIRS
Swap AM_PO_SUBDIRS and ZW_GNU_GETTEXT_SISTER_DIR lines in
*/configure.ac. ZW_GNU_GETTEXT_SISTER_DIR indirectly invokes
AC_REQUIRE(AM_PO_SUBDIRS) so results in AM_PO_SUBDIRS being emitted
before ZW_GNU_GETTEXT_SISTER_DIR if it hasn't already been invoked.
Alan Modra [Thu, 10 Jul 2025 01:45:16 +0000 (11:15 +0930)]
gas v850 md_convert_frag
The v850 md_convert_frag function oddly calls subseg_change twice
(commit 1cd986c58543). Neither call is needed, because that is done
in size_seg.
Convert the fr_opcode fixup field back (to an opindex, not fx_r_type)
using a cast rather than a union, since we used casts when setting up
those values. I guess the union was added to silence compiler
warnings about wrong-size casts, but unfortunately results in the
wrong value being retrieved on big-endian hosts.
Change "buffer" to a char* as there is no need to make it an
unsigned char*, and that way requires fewer casts. Finally, fix
formatting and use uintptr_t when make the rs_machine_dependent frags.
Remove subseg_change calls from cr16, crx, mn10200, mn10300, and sh
md_convert_frag too.
Alan Modra [Wed, 9 Jul 2025 08:45:10 +0000 (18:15 +0930)]
union alpha_macro_arg
Rename the old enum alpha_macro_arg to alpha_macro_argset, and create
a union alpha_macro_arg to use in all the alpha_macro.emit functions.
This avoids intptr_t casts on retrieving index values and void* casts
on storing them in the alpha_macros array.
Nelson Chu [Wed, 9 Jul 2025 04:53:41 +0000 (12:53 +0800)]
RISC-V: Fixed wrong imply result for zce when -march=rv32id_zce
The entry of "zce imply zcf" needs check_implicit_for_zcf, so it needs to be
placed after the entries of "whatever imply f". Otherwise the implicit zcf
may be missed. Also merge the march-implu-zce* testcases into imply testcases.
Nelson Chu [Wed, 9 Jul 2025 04:53:40 +0000 (12:53 +0800)]
RISC-V: Clarify the imply rule of c
This also fix the imply result for .option rvc.
Imply zcf when c and f and rv32
Imply zcd when c and d
Imply zca when c
Changed INSN_CLASS_C to INSN_CLASS_ZCA
Changed INSN_CLASS_F_AND_C to INSN_CLASS_ZCF
Changed INSN_CLASS_D_AND_C to INSN_CLASS_ZCD
Changed INSN_CLASS_ZIHINTNTL_AND_C to INSN_CLASS_ZIHINTNTL_AND_ZCA
The intention of creating an abstraction like
SFRAME_V2_GNU_AS_LD_ENCODING_FLAGS is to address the concern that there
should be a central place to enforce harmonious flags between GNU as and
ld. At the moment, the only flag that needs to be enforced is
SFRAME_F_FDE_FUNC_START_PCREL.
sframe.h and sframe-api.h are installed headers by libsframe for the
specification and implementation respectively. Adding a definition like
SFRAME_V2_GNU_AS_LD_ENCODING_FLAGS does not fit in either. Create a
new internal header instead to keep the definition uncoupled from
sframe.h and sframe-api.h. Rename the previously added
SFRAME_F_LD_MUSTHAVE_FLAGS to define the new
SFRAME_V2_GNU_AS_LD_ENCODING_FLAGS.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Use the new
internal header and SFRAME_V2_GNU_AS_LD_ENCODING_FLAGS.
gas/
* gen-sframe.c (output_sframe_internal): Likewise.
include/
* sframe-api.h (SFRAME_F_LD_MUSTHAVE_FLAGS): Move from..
* sframe-internal.h: ..to here. New file.
Alan Modra [Tue, 8 Jul 2025 23:44:06 +0000 (09:14 +0930)]
Merge init_private_section_data with copy_private_section_data
init_private_section_data is used by the linker and is a special case
of copy_private_section_data that copies a reduced set of section data
from input to output. Merge the two functions, adding a link_info
param to copy_private_section_data and remove init_private_section_data.
Alan Modra [Tue, 8 Jul 2025 23:43:14 +0000 (09:13 +0930)]
gas standardise md_section_align
The point here is that when valueT is 64 bits and int is 32 bits,
1 << align doesn't work for shifts larger than the size of int. (Not
that anyone is likely to use such large alignments in real code.)
Alan Modra [Tue, 8 Jul 2025 23:42:20 +0000 (09:12 +0930)]
gas char/unsigned char casts
This patch removes many unneeded casts to char or unsigned char. It's
worth noting that safe-ctype.h macros ISDIGIT and the like cope with
either signed or unsigned char.
In some cases a cast to unsigned char is replaced by anding with 0xff,
which accomplishes the same thing but doesn't rely on char being eight
bits. The patch also removes pointer casts, and a few unsigned char
pointer variables.
Alan Modra [Tue, 8 Jul 2025 23:39:23 +0000 (09:09 +0930)]
gas alpha sign extension macros
Use standard sign extend and range checking using unsigned
expressions that don't rely on implementation defined right shifts or
size of short and int.
Alan Modra [Tue, 8 Jul 2025 23:35:12 +0000 (09:05 +0930)]
gas md_number_to_chars
Calls to md_number_to_chars don't need to cast their value arg (*).
Remove those casts. avr_output_property_recode made a call to
md_number_to_chars with size of 1. Simplify that. tc-bpf.c
md_convert_frag used write_insn_bytes that simply copied input to
output. Dispense with that nonsense, and similarly in a couple of
other places where md_number_to_chars was called with size 1.
*) unless the value arg is an expression that needs a cast, eg. tic54x
emit_insn where the shift left could trigger signed overflow UB
without a cast.
Alan Modra [Tue, 8 Jul 2025 23:33:45 +0000 (09:03 +0930)]
gas various other void* casts
This removes assorted unneeded casts of void* pointers, and casts when
passing args to void* parameters or storing to void* pointers. The
patch also changes obj-coff.c stack_push to take a void* parameter,
and replaces an odd memcpy in tc-metag.c find_insn_templates with a
simple assignment.
Alan Modra [Tue, 8 Jul 2025 23:33:08 +0000 (09:03 +0930)]
gas various other const pointer changes
This removes a bunch of casts involving const pointers, in some cases
by making variables const pointers so a cast is not needed. In a
couple of places the cast hid errors with "&array" written rather than
"array", see iq2000_macro_defs and s_pru_align. tc-xgate.c cmp_opcode
is changed to be the standard qsort predicate to avoid a function
cast.
Alan Modra [Tue, 8 Jul 2025 23:32:05 +0000 (09:02 +0930)]
gas bfd_put and bfd_get arg casts
bfd_{h_,}put_* and bfd_{h_,}get_* have "void *" pointer params
nowadays. We don't need casts on their pointer args. We also don't
need to cast values passed to bfd_put.
Alan Modra [Tue, 8 Jul 2025 23:29:10 +0000 (08:59 +0930)]
gas NULL casts
This removes many unnecessary NULL casts. I'm also adding a few arg
casts in concat calls, to make the code consistent. Advice from quite
a few years ago was that it's better to use the exact type for args
corresponding to function ellipses, in case NULL is defined as plain
0. (I think that happened with some early 64-bit systems. Plain NULL
ought to be OK nowadays.)
Alan Modra [Tue, 8 Jul 2025 23:28:11 +0000 (08:58 +0930)]
gas bfd_reloc_code_real_type
Enumeration constants are integer types, so there should be no need to
cast such constants to int in expressions. (Perhaps some older gccs
warned, I checked back to gcc-4.5.) Remove some of those unnecessary
casts. Also remove unnecessary casts to bfd_reloc_code_real_type.
Alan Modra [Tue, 8 Jul 2025 23:24:56 +0000 (08:54 +0930)]
gas frag_var
Many frag_var calls have unnecessary casts on arguments, no doubt from
the days when binutils was written for K&R C. (ie. functions were not
prototyped so you needed to cast anything that didn't match the
expected type after default promotions, as you still do for args
matching a function ellipsis.) Remove those casts.
Alan Modra [Tue, 8 Jul 2025 23:24:24 +0000 (08:54 +0930)]
gas pointer to int and vice versa
Use "intptr_t" or "uintptr_t" for these conversions, not "long" which
is wrong on LLP64 systems, or "size_t" which is better but still not
the correct type.
* config/tc-alpha.c (emit_ldXu, emit_ldX, emit_uldXu, emit_uldX),
(emit_stX, emit_ustX, emit_sextX): Use correct type when
converting vlgsize pointer to in. Use "int" rather than
"long" for result.
* config/tc-ia64.c (generate_unwind_image): Use intptr_t cast
when passing personality_routine to frag_var.
* config/tc-ppc.c (ppc_frob_symbol <coff>): Use uintptr_t cast
when converting symbol pointer to valueT.
* config/tc-v850.c (md_assemble): Use intptr_t cast when
loading integer opindex.
Use bfd_follow_gnu_debuglink() and bfd_follow_gnu_debugaltlink() to find files
with debug info.
If necessary, gprofng-archive copies these files to EXP/archives.
For each executable, gprofng creates the Elf class twice.
One of them was a memory leak.
Fixed this by adding a new argument to Stabs::Stabs().
gprofng/ChangeLog
2025-07-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
PR 32147
PR 30194
* src/Disasm.cc (get_funcname_in_plt): Use the executable file instead
of the debug information file.
* src/Dwarf.h: Define debug_alt_strSec.
* src/DwarfLib.cc: Add support for DW_FORM_GNU_ref_alt,
DW_FORM_GNU_strp_alt.
* src/Elf.h (find_gnu_debug_files, get_dwr_section): New functions.
* src/Elf.cc: Likewise.
* src/Experiment.cc (copy_file): Add the const qualifier.
* src/Experiment.h: Likewise.
* src/LoadObject.cc (get_elf, openDebugInfo): Find files with debug info.
* src/LoadObject.h: Remove unused variables.
* src/Module.cc: Remove an argument in openDebugInfo().
* src/Stabs.cc (Stabs::Stabs): Add the Elf* argument.
* src/Stabs.h: Likewise.
* src/gp-archive.cc: Archive files with debug info.
* src/gp-archive.h (archive_file): New function.
Tom Tromey [Tue, 8 Jul 2025 14:52:59 +0000 (08:52 -0600)]
Fix wchar.exp test case per review
A recent patch of mine modified wchar.exp, but I failed to notice one
part of the review. This patch updates the code to conform to the
review comments.
Mark Goncharov [Tue, 1 Jul 2025 05:57:51 +0000 (08:57 +0300)]
RISC-V: Fix libpath_suffix selection for ldscript
When building a cross-compiler ld for RISC-V Linux systems, you can specify
target=riscv64*-linux* to create a linker that supports both 32-bit
(-march=rv32*) and 64-bit (-march=rv64*) architectures. The specified -march
value populates the EMULATION_NAME variable, which determines the default
linker script selection. For proper riscv64 target support, the build process
must prepare both elf32lriscv* and elf64lriscv* linker scripts. These should
align with the standard RISC-V Linux sysroot directory structure.
Signed-off-by: Mark Goncharov <mark.goncharov@syntacore.com>
WANG Xuerui [Sun, 6 Jul 2025 01:06:20 +0000 (09:06 +0800)]
LoongArch: Allow to relax instructions into NOPs after handling alignment
Right now, LoongArch linker relaxation is 2-pass, since after alignment
is done, byte deletion can no longer happen. However, as the alignment
pass also shrinks text sections, new relaxation chances may well be
created after alignment is done. Although at this point we can no longer
delete unused instructions without disturbing alignment, we can still
replace them with NOPs; popular LoongArch micro-architectures can
eliminate NOPs during execution, so we can expect a (very) slight
performance improvement from those late-created relaxation chances.
To achieve this, the number of relax passes is raised to 3 for
LoongArch, and every relaxation handler except loongarch_relax_align is
migrated to a new helper loongarch_relax_delete_or_nop, that either
deletes bytes or fills the bytes to be "deleted" with NOPs, depending on
whether the containing section already has undergone alignment. Also,
since no byte can be deleted during this relax pass, in the pass the
pending_delete_ops structure is no longer allocated, and
loongarch_calc_relaxed_addr(x) degrades to the trivial "return x" in
this case.
In addition, previously when calculating distances to symbols, an
extra segment alignment must be considered, because alignment may
increase distance between sites. However in the newly added 3rd pass
code size can no longer increase for "closed" sections, so we can skip
the adjustment for them to allow for a few more relaxation chances.
A simple way to roughly measure this change's effectiveness is to check
how many pcalau12i + addi.d pairs are relaxed into pcaddi's. Taking a
Firefox 140.0.2 test build of mine as an example:
Before: 47842 pcaddi's in libxul.so
After: 48089
This is a 0.5% increase, which is kind of acceptable for a peephole
optimization like this; of which 9 are due to the "relax"ed symbol
distance treatment.
ld: bfd: sframe: Update section size also for relocatable links
For relocatable links the output .sframe section size may be wrong.
This can be observed when dumping the SFrame information from the x86-64
sframe-reloc-1 test:
When running the x86-64 test cross build on a big-endian system, such
as s390x, objdump and readelf fail to dump the SFrame information with
the following error message:
Error: SFrame decode failure: Buffer does not contain SFrame data.
This is because the following check in flip_sframe() fails, which gets
only invoked if the endianness of the SFrame data is different from the
host system one:
/* All FDEs and FREs must have been endian flipped by now. */
if ((j != ihp->sfh_num_fres) || (bytes_flipped != (buf_size - hdrsz)))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While at it, remove the incorrect code comment. There is no
relationship between "do not update size" and the fact that the
"contents have not been relocated".
bfd/
* elf-sframe.c (_bfd_elf_write_section_sframe): Update section
size also for relocatable links.
NEWS: sframe: mention new semantics for SFrame FDE function start addr
The SFrame FDE's function start address is always emitted as follows by
GAS and ld: it is the offset of the start PC of the respective function
from the FDE field itself.
GAS and ld will emit a flag SFRAME_F_FDE_FUNC_START_PCREL set to 1
when emitting the field in this encoding.
* binutils/NEWS: Announce the change of encoding for SFrame FDE
func start addr field.
* gas/NEWS: Announce the emission of new flag
SFRAME_F_FDE_FUNC_START_PCREL.
* ld/NEWS: Likewise. Relocatable links are now fixed.
ld: bfd: sframe: fix incorrect r_offset in RELA entries
PR/32666 Incorrect .rela.sframe when using ld -r
Input SFrame sections are merged using _bfd_elf_merge_section_sframe (),
which clubs all SFrame FDEs together in one blob and all SFrame FREs in
another. This, of course, means the offset of an SFrame FDE in the output
section cannot be simply derived from the output_offset of the sections.
Fix this by providing _bfd_elf_sframe_section_offset () which returns
the new offset of the SFrame FDE in the merged SFrame section.
Unlike EH_Frame sections, which also use the _bfd_elf_section_offset (),
to update the r_offset, SFrame sections have distinct merging semantics.
In case of SFrame, the SFrame FDE will not simply sit at location
"sec->output_offset + offset of SFrame FDE in sec". Recall that information
layout in an SFrame section is as follows:
SFrame Header
SFrame FDE 1
SFrame FDE 2
...
SFrame FDEn
SFrame FREs (Frame Row Entries)
Note how the SFrame FDEs and SFrame FREs are clubber together in groups
of their own.
Next, also note how the elf_link_input_bfd () does a:
irela->r_offset += o->output_offset;
This, however, needs to be avoided for SFrame sections because the
placement of all FDEs is at the beginning of the section. So, rather than
conditionalizing this as follows:
if (o->sec_info_type != SEC_INFO_TYPE_SFRAME)
irela->r_offset += o->output_offset;
the implementation in _bfd_elf_sframe_section_offset () does a reverse
adjustment, so that the generic parts of the linking process in
elf_link_input_bfd () are not made to do SFrame specific adjustments.
Add a new enum to track the current state of the SFrame input section
during the linking process (SFRAME_SEC_DECODED, SFRAME_SEC_MERGED) for
each input SFrame section. This is then used to assert an assumption
that _bfd_elf_sframe_section_offset () is being used on an input SFrame
sections which have not been merged (via
_bfd_elf_merge_section_sframe ()) yet.
bfd/
* elf-bfd.h: New declaration.
* elf-sframe.c (_bfd_elf_sframe_section_offset): New definition.
* elf.c (_bfd_elf_section_offset): Adjust offset if SFrame
section.
ld/testsuite/
* ld-x86-64/x86-64.exp: New test.
* ld-x86-64/sframe-reloc-1.d: New test.
bfd: gas: ld: libsframe: adopt new encoding for FDE func start addr field
This patch convenes a set of changes in bfd, gas, ld, libsframe towards
moving to the new encoding for the 'sfde_func_start_address' field in
SFrame FDE.
First, gas must now mark all SFrame sections with the new flag
SFRAME_F_FDE_FUNC_START_PCREL. gas was already emitting the field
in the said encoding.
* gas/gen-sframe.c (output_sframe_internal): Emit the flag
SFRAME_F_FDE_FUNC_START_PCREL.
Similarly for ld, adopt the new semantics of sfde_func_start_address
consistently. This means:
- When merging SFrame sections, check that all input SFrame sections
have the SFRAME_F_FDE_FUNC_START_PCREL flag set. If the check
fails, ld errors out.
- When merging SFrame sections, keep even the in-memory contents of
the FDE function start address (buffer passed to libsframe
sframe_encoder_write () for writing out) encoded in the new
semantics. While it is, in theory, possible that instead of doing this
change here, we adjust the value of sfde_func_start_address at the final
write (sframe_encoder_write) time. But latter is not favorable for
maintenanance and may be generally confusing for developers.
- When creating SFrame for PLT entries, emit flag
SFRAME_F_FDE_FUNC_START_PCREL.
include/
* sframe-api.h (SFRAME_F_LD_MUSTHAVE_FLAGS): New definition.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Check for flag
combinatation SFRAME_F_LD_MUSTHAVE_FLAGS set for all input and
output SFrame sections. If not, error out. Also, adopt the new
semantics of function start address encoding.
* bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Emit flag
SFRAME_F_FDE_FUNC_START_PCREL.
Next, for dumping SFrame sections, now that we are emitting the same
encoding in GAS, non-relocatable and relocatable SFrame links, it is the
time to set relocate to TRUE in debug_displays[].
binutils/
* dwarf.c (struct dwarf_section_display): Allow sframe sections
to now be relocated.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Update the
test. Relocatable SFrame sections now display non-zero value
(appropriate function start address).
Now, as the SFrame sections on-disk and in-memory use the new semantics of
sfde_func_start_address encoding (i.e., function start address is the
offset from the sfde_func_start_address field to the start PC), the
calculation to make it human readable (i.e., relatable to the addresses
in .text sections) needs adjustment.
libsframe/
* sframe-dump.c (dump_sframe_func_with_fres): Adjust the
function start address for dumping.
Now that both the emission of the new encoding, and the relocation of
sections before dumping them is in place, it is time to adjust the
testcases.
Naturally, the change of semantics for 'SFrame FDE function start address'
has consequences on the implementation in libsframe. As per the new
semantics:
- Function start address in the SFrame FDE (sfde_func_start_address)
is an offset from the FDE function start address field to the start
PC of the associated function.
Note that, the libsframe library brings the SFrame section contents into
its own memory to create a sframe_decoder_ctx object via sframe_decode
(). Many internal and user-interfacing APIs then may use
sframe_decoder_ctx object to interact and fulfill the work.
In context of changing semantics for sfde_func_start_address, following
relevant examples may help understand the impact:
- sframe_find_fre () finds a the SFrame stack trace data (SFrame FRE)
given a lookup offset (offset of lookup_pc from the start of SFrame
section). Now that the sfde_func_start_address includes the
distance from the sfde_func_start_address field to the start of
SFrame section itself, the comparison checks of
sfde_func_start_address with the incoming lookup offset need
adjustment.
- Some internal functions (sframe_get_funcdesc_with_addr_internal ()
finds SFrame FDE by using binary seach comparing
sfde_func_start_address fields, etc.) need adjustments.
- sframe_encoder_write () sorts the SFrame FDEs before writing out
the SFrame data. Sorting of SFrame FDE via the internal function
sframe_sort_funcdesc() needs adjustments: the new encoding of
sfde_func_start_address means the distances are not from the same
anchor, so cannot be sorted directly.
This patch takes the approach of adding a new internal function:
- sframe_decoder_get_secrel_func_start_addr (): This function returns
the offset of the start PC of the function from the start of SFrame
section, i.e., it gives a section-relative offset.
As the sframe_decoder_get_secrel_func_start_addr () API needs the value
of the function index in the FDE list, another internal API needs
sframe_fre_check_range_p () adjustments too.
Sorting the FDEs (via sframe_sort_funcdesc ()) is done by first bringing
all offsets in sfde_func_start_address relative to start of SFrame
section, followed by sorting, and then readjusting the offsets accroding
to the new position in the FDE list.
libsframe/
* sframe.c (sframe_decoder_get_secrel_func_start_addr): New
static function.
(sframe_fre_check_range_p): Adjust the interface a bit.
(sframe_get_funcdesc_with_addr_internal): Use
sframe_decoder_get_secrel_func_start_addr () when comparing
sfde_func_start_address with user input offset.
(sframe_find_fre): Adopt the new semantics.
(sframe_sort_funcdesc): Likewise.
For the libsframe testsuite, use the new encoding for FDE func start
addr: distance between the FDE sfde_func_start_address field and the
start PC of the function itself.
Use SFRAME_F_FDE_FUNC_START_PCREL flag, though the sframe_encode ()
interface in libsframe applies no sanity checks for the encoding itself.
libsframe/testsuite/
* libsframe.find/findfre-1.c: Adjust to use the new
SFRAME_F_FDE_FUNC_START_PCREL specific encoding.
* libsframe.find/findfunc-1.c: Likewise.
* libsframe.find/plt-findfre-1.c: Likewise.
* libsframe/testsuite/libsframe.decode/DATA2: Update data file
due to usage of new SFRAME_F_FDE_FUNC_START_PCREL flag.
* libsframe/testsuite/libsframe.encode/encode-1.c: Use flag
SFRAME_F_FDE_FUNC_START_PCREL.
objdump, readelf: sframe: apply relocations before textual dump
PR libsframe/32589 - function start address is zero in SFrame section dump
Currently, readelf and objdump display the SFrame sections in ET_REL
object files with function start addresses of each function as 0. This
makes it difficult to correlate SFrame stack trace information with the
individual functions in the object file.
For objdump, use the dump_dwarf () interface to dump SFrame section.
Similarly, for readelf, use the display_debug_section () interface to
dump SFrame section. These existing interfaces (for DWARF debug
sections) already support relocating the section contents before
dumping, so lets use them for SFrame sections as well.
When adding a new entry for SFrame in debug_option_table[], use char
'nil' and the option name of "sframe-internal-only". This is done so
that there is no additional (unnecessary) user-exposed ways of dumping
SFrame sections. Additionally, we explicitly disallow the
"sframe-internal-only" from external/user input in --dwarf (objdump).
Similarly, "sframe-internal-only" is explicitly matched and disallowed
from --debug-dump (readelf).
For objdump and readelf, we continue to keep the same error messaging as
earlier:
$ objdump --sframe=sframe bubble_sort.o
...
No sframe section present
$ objdump --sframe=.sfram bubble_sort.o
...
No .sfram section present
$ objdump --sframe=sframe-internal-only sort
...
No sframe-internal-only section present
Similarly for readelf:
$ readelf --sframe= bubble_sort.o
readelf: Error: Section name must be provided
$ readelf --sframe=.sfram bubble_sort.o
readelf: Warning: Section '.sfram' was not dumped because it does not exist
$ readelf --sframe=sframe bubble_sort.o
readelf: Warning: Section 'sframe' was not dumped because it does not exist
PS: Note how this patch adds a new entry to debug_displays[] with a
relocate value set to FALSE. This will be set to TRUE in a subsequent
patch ("bfd: gas: ld: libsframe: emit func start addr field as an offset
from FDE") when fixes are made to emit the value of the
'sfde_func_start_address' field in the new encoding
SFRAME_F_FDE_FUNC_START_PCREL across gas and ld.
binutils/
* dwarf.c (display_sframe): New definition.
(dwarf_select_sections_all): Enable SFrame section too.
(struct dwarf_section_display): Add entry for SFrame section.
* dwarf.h (enum dwarf_section_display_enum): Add enumerator for
SFrame.
* objdump.c (dump_section_sframe): Remove.
(dump_sframe_section): Add new definition.
(dump_bfd): Use dump_sframe_section.
* binutils/readelf.c (dump_section_as_sframe): Remove.
include: sframe: doc: define new flag SFRAME_F_FDE_FUNC_START_PCREL
Add a new flag SFRAME_F_FDE_FUNC_START_PCREL to SFrame stack trace
format. If set, this flag indicates that the function start address
field (sfde_func_start_address) is the offset to the function start
address from the SFrame FDE function start address field itself.
Such an encoding is friendlier to the exisitng PC-REL relocations
available in the ABIs supported in SFrame: AMD64 (R_X86_64_PC32) and
AArch64 (R_AARCH64_PREL32). In subsequent patches, we will make the
implementation in gas and ld to both:
- emit the values in the same (above-mentioned) encoding uniformly.
- set the flag SFRAME_F_FDE_FUNC_START_PCREL in the SFrame header
for consumers to be able to distinguish.
Define SFRAME_V2_F_ALL_FLAGS in sframe.h to help keep the implementation
less error-prone by keeping a set of all defined flags at a central
place. Adjust the check in sframe_header_sanity_check_p () to use the
SFRAME_V2_F_ALL_FLAGS instead.
Add documentation for SFRAME_F_FDE_FUNC_START_PCREL. Update the
documentation about the encoding of the sfde_func_start_address field.
Also, update the section "Changes from Version 1 to Version 2" to
include the specification of the new flag SFRAME_F_FDE_FUNC_START_PCREL
as an erratum to the SFrame Version 2 specification.
include/
* sframe.h (SFRAME_F_FDE_FUNC_START_PCREL): New definition.
(SFRAME_V2_F_ALL_FLAGS): Likewise.
libsframe/
* sframe-dump.c (dump_sframe_header_flags): Update to include
the new flag SFRAME_F_FDE_FUNC_START_PCREL.
* sframe.c (sframe_header_sanity_check_p): Use
SFRAME_V2_F_ALL_FLAGS.
libsframe/doc/
* sframe-spec.texi: Add details about the new flag. Also update
the defails about the sfde_func_start_address encoding.
include: libsframe: add APIs for offsetof FDE func start addr field
These APIs will be later used by the linker to arrange SFrame FDEs in
the output SFrame section.
include/
* sframe-api.h (sframe_decoder_get_offsetof_fde_start_addr): New
declaration.
(sframe_encoder_get_offsetof_fde_start_addr): Likewise.
libsframe/
* libsframe.ver: List the new APIs.
* sframe.c (sframe_decoder_get_offsetof_fde_start_addr): New
definition.
(sframe_encoder_get_offsetof_fde_start_addr): Likewise.
libsframe: refactor code for dumping section flags
To prepare code for accommodating new flag additions easily as the
format evolves.
libsframe/
* sframe-dump.c (SFRAME_HEADER_FLAGS_STR_MAX_LEN): Remove.
(dump_sframe_header_flags): .. to here. New definition.
(PRINT_FLAG): New definition.
(dump_sframe_header): Move some implementation from here ..
include: libsframe: add APIs for SFrame header flags
Add new APIs, one each for getting flags from the SFrame decoder and
SFrame encoder context objects respectively.
These will later be used by the linker to uniformly access the flags,
given the SFrame decoder and SFrame encoder objects.
Use the new API, where applicable, within libsframe.
include/
* sframe-api.h (sframe_decoder_get_flags): New declaration.
(sframe_encoder_get_flags): Likewise.
libsframe/
* libsframe.ver: List new APIs.
* sframe.c (sframe_decoder_get_flags): New definition.
(sframe_encoder_get_flags): Likewise.
(sframe_get_funcdesc_with_addr_internal): Use the new API.
(sframe_encoder_get_flags): Likewise.
(sframe_encoder_write_sframe): Likewise.
The patch corrects the mips16 and micromips rela tables to *not*
use _bfd_mips_elf_{hi,lo}16_reloc. These special functions are
inappropriate for RELA relocs where addends are in the reloc rather
than in the section contents. See corresponding rela R_MIPS howtos.
bfd/
* elf64-mips.c (mips16_elf64_howto_table_rela)
<R_MIPS16_HI16, R_MIPS16_LO16>: Use _bfd_mips_elf_generic_reloc
special_function.
(micromips_elf64_howto_table_rela)
<R_MICROMIPS_HI16, R_MICROMIPS_LO16>: Similarly.
* elfn32-mips.c: As for elf64-mips.c.
MIPS/BFD: Fix RELA handling of borrow in the generic linker
Fix an issue with `_bfd_mips_elf_generic_reloc' not taking into account
any borrow from the lower part in the handling of relocations of the
HI/LO kind and resulting in incorrect calculations made for RELA targets
in the generic used for non-ELF output such as S-records. This doesn't
trigger for REL targets because they call `_bfd_mips_elf_generic_reloc'
indirectly from `_bfd_mips_elf_lo16_reloc' so as to obtain a complete
32-bit addend from relocation pairs and in calculating the addend the
latter function uses a hack to work around the lack of borrow handling
in the former function.
The MIPS/ELF linker is unaffected as it uses its own calculations.
Correct the calculation of the relevant partial relocations made in
`_bfd_mips_elf_generic_reloc' then to take the borrow into account and
remove the hack from `_bfd_mips_elf_lo16_reloc' as no longer needed.
Add generic linker test cases accordingly expecting the same disassembly
from srec output produced as from ELF output produced by the MIPS/ELF
linker.
MIPS/testsuite: Expand GAS and LD HI/LO relocation coverage
Expand test coverage for HI/LO relocation handling and add conventional
MIPS and microMIPS GAS tests as well as conventional MIPS, microMIPS,
and MIPS16e2 LD tests, covering R_MIPS_HI16, R_MIPS_LO16, R_MIPS16_HI16,
R_MIPS16_LO16, R_MICROMIPS_HI16, and R_MICROMIPS_LO16 relocations, as
well as 64-bit R_MIPS_HIGHEST, R_MIPS_HIGHER, R_MICROMIPS_HIGHEST, and
R_MICROMIPS_HIGHER relocations.
Modify the linker script so as to retain the `.MIPS.abiflags' section so
as to disassemble MIPS16e2 code correctly, as MIPS16e2 ASE information
is only carried in that section and not in ELF file header's `e_flags'.
MIPS16e2 and microMIPS code requires at least the MIPS32r2 ISA (or the
MIPS64r2 one for the n32 and n64 ABIs), which is incompatible with the
`mips:5900' linker output architecture and causes link failures such as:
./ld-new: tmpdir/mips-hilo1.o: linking mips:isa32r2 module with previous mips:5900 modules
./ld-new: failed to merge target specific data of file tmpdir/mips-hilo1.o
Therefore exclude `mips*el-ps2-elf*' targets from microMIPS and MIPS16e2
LD testing.
MIPS/LD/testsuite: Switch mips16-hilo tests to new disassembly format
Switch the o32 and n32 mips16-hilo MIPS LD tests to the new disassembly
format, to reduce discrepancies in output in preparation to reuse for
generic linker tests.
Taking the first line of disassembly output as an example the difference
is:
for ELF and srec input respectively with the currently used older format
requested with `--prefix-addresses', but with the new disassembly format
it is exactly the same between the two input formats and no information
that we need is lost in the transition:
MIPS/LD/testsuite: Remove symbol table output from mips16-hilo tests
The o32 and n32 mips16-hilo MIPS LD tests request symbol table output
only to discard it in matching. The symbol table is not relevant to
these tests, so remove it from output requested and adjust matching
patterns accordingly.
MIPS/testsuite: Fix %hi usage across MIPS16 GAS/LD tests
Fix a couple of places in MIPS GAS and LD R_MIPS16_HI16/R_MIPS16_LO16
relocation tests where the %hi operator has been incorrectly used, but
the %lo operator is expected to complement the preceding %hi operation.
IRIX 6 emulations place external small common symbols in the regular
common section instead of the small common section. With mips16-hilo
test this leads to a different symbol assignment to memory locations
between o32 and n32 ABIs, as follows:
which in turn causes a testsuite regression. Since the specific mapping
of symbols does not matter for the scope of the test, reorder the small
common section ahead of SBSS, so that the `small_external_common' symbol
ends up in the same place regardless of whether via the regular common
section or the small common section. Adjust embedded addresses in the
disassembly expected accordingly, removing the regression concerned:
mips-sgi-irix6 -FAIL: R_MIPS16_HI16 and R_MIPS16_LO16 relocs n32
mips64el-ps2-elf -FAIL: R_MIPS16_HI16 and R_MIPS16_LO16 relocs n32
MIPS/LD/testsuite: Unify o32/n32 mips16-hilo test output
The mips16-hilo MIPS LD test case is supposed to produce the same final
linked output regardless of whether the o32 or n32 ABI has been chosen
for assembly. Reuse o32 output for the n32 test then.
Alan Modra [Sat, 5 Jul 2025 08:57:36 +0000 (18:27 +0930)]
gas pending_bundle_size assert
oss-fuzz managed to trigger this assert, by assembling directives in
the absolute section. Avoid this using similar code to that in
frags.c:frag_new (commit 2dc2dfa7d7a5).
Tom de Vries [Sat, 5 Jul 2025 11:29:53 +0000 (13:29 +0200)]
[gdb/tdep] Fix selftest scoped_mmap on freebsd
On x86_64-freebsd, I run into:
...
$ gdb -q -batch -ex "maint selftest scoped_mmap"
Running selftest scoped_mmap.
Self test failed: self-test failed at scoped_mmap-selftests.c:50
Failures:
scoped_mmap
Ran 1 unit tests, 1 failed
...
The problem is that this call:
...
::scoped_mmap smmap (nullptr, sysconf (_SC_PAGESIZE), PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
...
returns MAP_FAILED and sets errno to EINVAL because the argument fd == 0.
If MAP_ANONYMOUS is used, fd == -1 should be used on freebsd. On linux, fd is
ignored but -1 is recommended for portability.
Tom de Vries [Sat, 5 Jul 2025 11:29:53 +0000 (13:29 +0200)]
[gdb/tdep] Fix doc string of kvm pcb/proc command
On x86_64-freebsd, I ran into:
...
$ gdb -q -batch -ex "maint selftest help_doc_invariants"
Running selftest help_doc_invariants.
help doc broken invariant: command 'kvm pcb' help doc first line is not \
terminated with a '.' character
Self test failed: self-test failed at command-def-selftests.c:120
Andrew Burgess [Mon, 23 Jun 2025 15:32:28 +0000 (16:32 +0100)]
gdb: create gdb.sum/gdb.log summary after using check-all-boards
Use the contrib/dg-extract-results.sh script to create a gdb.sum and
gdb.log summary after running the check-all-boards make target.
Having the results from all the boards merged into a single file
isn't (maybe) the most useful, but it isn't a bad thing. However, the
great thing about merge the results is that the totals are also
merged.
The 'check-all-boards' recipe can then extract these totals, just as
we do for the normal 'check' recipe, this makes is much easier to
spot if there are any unexpected failures when using
'check-all-boards'.
Pietro Monteiro [Sat, 5 Jul 2025 01:13:13 +0000 (21:13 -0400)]
sim: configury: fix obsolete macros
Running `autoreconf -vf -Wall' in the sim directory shows errors about the use
of obsolete macros. This patch fix the issues with macros used or defined in
the sim directory. However, it doesn't fix all warnings. There's 1 autoconf
warning from `config/pkg.m4', and many automake warnings about target
shadowing. It cuts a lot of the noise down and makes an upgrade to
autoconf 2.71+ easier.
- Replace AC_CANONICAL_SYSTEM by AC_CANONICAL_TARGET
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fCANONICAL_005fSYSTEM-1997
- Replace AC_TRY_COMPILE by AC_COMPILE_IFELSE
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fTRY_005fCOMPILE-2203
- Replace AC_ERROR by AC_MSG_ERROR
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fERROR-2034
- Remove AC_TYPE_SIGNAL and replace `RETSIGTYPE' by `void' in the source
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fTYPE_005fSIGNAL-2213
- Remove AC_STRUCT_ST_BLKSIZE, it's already covered by a AC_CHECK_MEMBERS call
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fSTRUCT_005fST_005fBLKSIZE-2176
- Remove AC_STRUCT_ST_RDEV, it's already covered by a AC_CHECK_MEMBERS call
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Obsolete-Macros.html#index-AC_005fSTRUCT_005fST_005fRDEV-2180
- Remove AC_STRUCT_ST_BLOCKS. It is not obsolete, but it's already covered by a
AC_CHECK_MEMBERS call.
- Replace deprecated C macros HAVE_ST_${MEMBER} by HAVE_STRUCT_STAT_ST_${MEMBER}
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/
Particular-Structures.html#index-AC_005fSTRUCT_005fST_005fBLOCKS-693
Jan Beulich [Fri, 4 Jul 2025 08:42:18 +0000 (10:42 +0200)]
gas: introduce .errif and .warnif
Rather than having people resort to indirect means to issue a certain
kind of diagnostic conditionally upon an expression which can (or
should) only be evaluated when all sections were sized and all symbols
had their final values established, provide directives to directly
achieve this.
Jan Beulich [Fri, 4 Jul 2025 08:41:34 +0000 (10:41 +0200)]
gas: add a means to programmatically determine the assembler version
It has been more than once that I would have wanted to have a way to
know the gas version in assembly sources, perhaps for use with .if. Add
such a pre-defined symbol, introducing the common pattern GAS(<symbol>)
for any such symbols. The use of parentheses is to keep the risk of
collisions with users' symbols as low as possible. (Possible future
arch-specific symbols may want to use GAS(<arch>:<symbol>).)
Similarly permit determining whether the assembler is a released
version. The exact value probably isn't of much use, it's more the
defined-ness that one might care about. Yet the symbol needs to have
some value anyway.
While by default pre-defined symbols won't be emitted to the symbol
table, introduce -emit-local-absolute to allow requesting this. Re-
purpose flag_strip_local_absolute to become tristate, with a negative
value indicating to also emit pre-defined symbols.
Jan Beulich [Fri, 4 Jul 2025 08:40:31 +0000 (10:40 +0200)]
cris/testsuite: don't use --em=
Using such abbreviations is fine when written on an interactive command
line by a human. In scripts and alike, doing so risks colliding with
later option additions, as is about to occur for gas: Shortly there'll
be --emit-local-absolute.
Simon Marchi [Thu, 3 Jul 2025 17:37:41 +0000 (13:37 -0400)]
gdb/linux-nat: initialize lwp_info::syscall_state
When running gdb.base/foll-fork-syscall.exp with a GDB built with UBSan,
I get:
/home/simark/src/binutils-gdb/gdb/linux-nat.c:1906:28: runtime error: load of value 3200171710, which is not a valid value for type 'target_waitkind'
ERROR: GDB process no longer exists
GDB process exited with wait status 3026417 exp9 0 1
UNRESOLVED: gdb.base/foll-fork-syscall.exp: follow-fork-mode=child: detach-on-fork=on: test_catch_syscall: continue to breakpoint after fork
The error happens here:
#0 __sanitizer::Die () at /usr/src/debug/gcc/gcc/libsanitizer/sanitizer_common/sanitizer_termination.cpp:50
#1 0x00007ffff600d8dd in __ubsan::__ubsan_handle_load_invalid_value_abort (Data=<optimized out>, Val=<optimized out>) at /usr/src/debug/gcc/gcc/libsanitizer/ubsan/ubsan_handlers.cpp:551
#2 0x00005555636d37b6 in linux_handle_syscall_trap (lp=0x7cdff1eb1b00, stopping=0) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:1906
#3 0x00005555636e0991 in linux_nat_filter_event (lwpid=3030627, status=1407) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:3044
#4 0x00005555636e407f in linux_nat_wait_1 (ptid=..., ourstatus=0x7bfff0d6cf18, target_options=...) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:3381
#5 0x00005555636e7795 in linux_nat_target::wait (this=0x5555704d35e0 <the_amd64_linux_nat_target>, ptid=..., ourstatus=0x7bfff0d6cf18, target_options=...) at /home/simark/src/binutils-gdb/gdb/linux-nat.c:3607
#6 0x000055556378fad2 in thread_db_target::wait (this=0x55556af42980 <the_thread_db_target>, ptid=..., ourstatus=0x7bfff0d6cf18, options=...) at /home/simark/src/binutils-gdb/gdb/linux-thread-db.c:1398
#7 0x0000555564811327 in target_wait (ptid=..., status=0x7bfff0d6cf18, options=...) at /home/simark/src/binutils-gdb/gdb/target.c:2593
I believe the problem is that lwp_info::syscall_state is never
initialized. Fix that by initializing it with TARGET_WAITKIND_IGNORE.
This is the value we use elsewhere when resetting this field to mean
"not stopped at a syscall".
Change-Id: I5b76c63d1466d6e63448fced03305fd5ca8294eb Approved-By: Tom Tromey <tom@tromey.com>
projects / thirdparty / binutils-gdb.git / log
