Jan Beulich [Fri, 24 May 2024 10:23:22 +0000 (12:23 +0200)]
gas: extend \+ support to .irp / .irpc
PR gas/31752
These are effectively macro-like, without any separate macro definition.
They already support \@, so they would better also support \+. This
allows, where desired, to get away without maintaining an explicit count
variable in source code.
With this the recently introduced testcase doesn't need any xfails
anymore.
Jan Beulich [Fri, 24 May 2024 10:22:54 +0000 (12:22 +0200)]
gas: adjust handling of quotes for .irpc
The present handling of inner double quotes can lead to very strange
diagnostics. Follow one of the two possible interpretations of the doc:
@dots{} referring to possibly multiple white space separated
@var{values}, each of which may be quoted. The original implementation,
prior to 465e5617233f ("PR gas/3856"), hints at the other possible
interpretation: When quoted there's only a single @var{values}, with
inner quotes taken as ordinary characters. That, however, seems overall
less useful to me.
While touching the documentation, mirror the (inverse) spelling
correction (@section line inconsistent with actual description) to .irp
as well.
Jan Beulich [Fri, 24 May 2024 10:21:57 +0000 (12:21 +0200)]
x86: simplify VexVVVV_SRC2 handling for the XOP case
As already suggested during review, rather than having an extra
conditional in build_modrm_byte() (a code path used for quite a few
more insns, including even certain GPR ones), adjust the attribute in
the installed template to properly describe things with operands
swapped.
These run after template matching. Therefore operands are already known
to match the template in use. With the loop bodies skipping anything not
a GPR in the actual operands, there's therefore no need to check the
template's operand type for permitting Reg or Accum.
At the same time bring the three functions in sync for the "byte" part
of the logic, as far as checking the template for other sizes (qword
specifically) goes. Plus drop a stale comment from check_qword_reg(),
when all three are now behaving the same in this regard.
Jan Beulich [Fri, 24 May 2024 09:50:38 +0000 (11:50 +0200)]
x86: correct VCVT{,U}SI2SD
Properly reject inappropriate suffixes (No_lSuf / No_qSuf mistakenly
omitted by cf665fee1d6c ["x86: re-work AVX512 embedded rounding / SAE"]),
to avoid emitting bad or arbitrarily guessed instructions. Interestingly
check_{long,qword}_suffix() don't help here, which perhaps is another
indication that the way they work right now isn't quite appropriate.
Sadly correcting just the templates breaks operand ambiguity detection,
since so far that worked from a single template permitting more than one
suffix. Here we have ambiguity though which can now be noticed only when
taking all (matching) templates together. Therefore we need to determine
further matching templates (see code comments for constraints), to then
accumulate permitted suffixes across all of them.
Tom de Vries [Fri, 24 May 2024 07:36:52 +0000 (09:36 +0200)]
[gdb/testsuite] Add PR26286 kfail in gdb.threads/attach-many-short-lived-threads.exp
When running test-case gdb.threads/attach-many-short-lived-threads.exp, I run
regularly into PR26286:
...
(gdb) continue^M
Continuing.^M
[LWP ... exited]^M
...
[LWP ... exited]^M
^M
Program terminated with signal SIGTRAP, Trace/breakpoint trap.^M
The program no longer exists.^M
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: \
break at break_fn: 1
...
Add a kfail for this, such that we have:
...
(gdb) KFAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: \
break at break_fn: 1 (PRMS: threads/26286)
...
Reviewed-By: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested on x86_64-linux.
Felix Willgerodt [Tue, 21 May 2024 07:20:39 +0000 (09:20 +0200)]
gdb, testsuite: Fix return value in gdb.base/foll-fork.exp
In a remote testing setup, I saw this error:
~~~
(gdb) FAIL: gdb.base/foll-fork.exp: check_fork_catchpoints: runto: run to main
ERROR: tcl error sourcing gdb/gdb/testsuite/gdb.base/foll-fork.exp.
ERROR: expected boolean value but got ""
while executing
"if { ![check_fork_catchpoints] } {
untested "follow-fork not supported"
return
}"
(file "gdb/gdb/testsuite/gdb.base/foll-fork.exp" line 434)
invoked from within
"source gdb/gdb/testsuite/gdb.base/foll-fork.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source gdb/gdb/testsuite/gdb.base/foll-fork.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
Remote debugging from host 172.0.1.3, port 37766
Killing process(es): 1171
Quit
~~~
The actual reason for this were some connection problems. Though the
function check_fork_catchpoints shouldn't return an empty string, especially
as it promises to always return 0 or 1. Fix that.
gdb/testsuite: Restore libc_has_debug_info's less strict behaviour
The code that was factored out from gdb.base/relativedebug.exp assumed that
libc has debug info and only determined that it doesn't if it saw a specific
message from GDB to that effect. In the process of factoring it into a
require predicate, I made it stricter by trying to make a specific
determination of whether or not debug info is available.
Pedro noticed that "It'll disable the testcase on systems that link with
their libc statically (even if has debug info), or systems that name their
libc something else." Which is something I hadn't considered.
This patch returns libc_has_debug_info to the original behaviour.
Also, remove a verbose message that is redundant with the $message
variable.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31700 Approved-By: Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 17 May 2024 14:55:46 +0000 (08:55 -0600)]
Default dwarf_synchronous to true
Unfortunately the background DWARF reading series introduced a number
of races, as repored by thread sanitizer. This patch changes gdb to
disable this feature for the time being -- in particular for the gdb
15 release.
I've filed a bug and linked all the known races to it. Once those are
fixed we can re-enable this feature by default.
Cui, Lili [Wed, 22 May 2024 08:15:47 +0000 (16:15 +0800)]
Support APX zero-upper
This patch is to enable ZU for IMUL (opcodes 0x69 and 0x6B) and SETcc.
Since the spec only recommends one form of setzu, I won't be adding
set<cc>reg32/reg64 support in this patch.
gas/ChangeLog:
* config/tc-i386.c (build_apx_evex_prefix): Handle ZU.
* testsuite/gas/i386/x86-64.exp: Added new tests for ZU.
* testsuite/gas/i386/x86-64.exp: Added new tests for ZU.
* testsuite/gas/i386/x86-64-apx-zu-intel.d: New test.
* testsuite/gas/i386/x86-64-apx-zu-inval.l: Ditto.
* testsuite/gas/i386/x86-64-apx-zu-inval.s: Ditto.
* testsuite/gas/i386/x86-64-apx-zu.d: Ditto.
* testsuite/gas/i386/x86-64-apx-zu.s: Ditto.
opcodes/ChangeLog:
* i386-dis-evex-prefix.h: Handle PREFIX_EVEX_MAP4_40 ~
PREFIX_EVEX_MAP4_4F.
* i386-dis-evex.h: Ditto.
* i386-dis.c (struct dis386): Add new micro 'ZU'.
(putop): Handle %ZU.
* i386-gen.c: Added ZU.
* i386-opc.h: Ditto.
* i386-opc.tbl: Added new templates to support ZU.
Indu Bhagat [Tue, 21 May 2024 19:59:55 +0000 (12:59 -0700)]
gas: ginsn: remove unnecessary buffer allocation and free
A previous commit 80ec235 fixed the memory leaks, but brought to light
that the code should ideally make consistent use of snprintf and not
allocate/free more buffers than necessary.
gas/
* ginsn.c (ginsn_dst_print): Use snprintf consistently.
- /* The hyphenated form is preferred for disassembly if there are
- more than two registers in the list, and the register numbers
are monotonically increasing in increments of one. */
+ /* The hyphenated form is preferred for disassembly if there is
+ more than one register in the list, and the register numbers
are monotonically increasing in increments of one. */
Tom Tromey [Tue, 21 May 2024 11:13:18 +0000 (05:13 -0600)]
Clarify documentation for pretty_printer.child
An Ada pretty-printer had a bug where its 'child' method returned a
gdb.Value rather than a tuple. Kévin suggested that the documentation
for this method could be improved to clarify this.
Reviewed-By: Kévin Le Gouguec <legouguec@adacore.com> Approved-By: Eli Zaretskii <eliz@gnu.org>
Nick Alcock [Mon, 20 May 2024 13:31:03 +0000 (14:31 +0100)]
include, libctf: improve documentation
Some review comments came in after I pushed the last lot of ctf-api.h
comment improvements. They were good, so I've incorporated them.
Mostly: better _next iterator usage info, better info on ctf_*open
functions, and better info on ctf_type_aname and ctf_type_name_raw.
Kévin Le Gouguec [Mon, 20 May 2024 15:22:50 +0000 (17:22 +0200)]
gdb: Fix Windows build after #include shuffle
Without this patch, the build chokes on:
../../src/gdb/windows-nat.c:384:21: error: field 'm_debug_event_pending' has incomplete type 'std::atomic<bool>'
384 | std::atomic<bool> m_debug_event_pending { false };
| ^~~~~~~~~~~~~~~~~~~~~
In file included from […gcc tree…]/include/c++/13.2.1/bits/shared_ptr_atomic.h:33,
from […gcc tree…]/include/c++/13.2.1/memory:81,
from ../../src/gdb/../gdbsupport/gdb_unique_ptr.h:23,
from ../../src/gdb/../gdbsupport/common-utils.h:26,
from ../../src/gdb/../gdbsupport/common-defs.h:199,
from ./../../src/gdb/defs.h:26,
from <command-line>:
[…gcc tree…]/include/c++/13.2.1/bits/atomic_base.h:174:12: note: declaration of 'struct std::atomic<bool>'
174 | struct atomic;
| ^~~~~~
make.exe[2]: *** [Makefile:1947: windows-nat.o] Error 1
Presumably windows-nat.c relied on objfiles.h including <atomic>,
which was undone in 2024-05-16 "gdb: remove unused includes in
objfiles.{c,h}" (f617661c110).
When running test-case gdb.testsuite/gdb-caching-proc-consistency.exp with
target board native-gdbserver, we run into:
...
(gdb) ERROR: tcl error sourcing gdb.testsuite/gdb-caching-proc-consistency.exp.
ERROR: gdbserver does not support attach 4827 without extended-remote
while executing
"error "gdbserver does not support $command without extended-remote""
(procedure "gdb_test_multiple" line 51)
invoked from within
"gdb_test_multiple "attach $test_pid" "can spawn for attach" {
-re -wrap "$attaching_re\r\n.*ptrace: Operation not permitted\\." {
# Not permitte..."
(procedure "gdb_real__can_spawn_for_attach_1" line 27)
invoked from within
"gdb_real__can_spawn_for_attach_1"
...
The problem is that:
- can_spawn_for_attach_1 is a helper function for can_spawn_for_attach,
designed to be called only from that function, and
- can_spawn_for_attach_1 is a gdb_caching_proc, and consequently
test-case gdb.testsuite/gdb-caching-proc-consistency.exp calls
can_spawn_for_attach_1 directly.
Fix this by copying the early-outs from can_spawn_for_attach to
can_spawn_for_attach_1.
Tested on x86_64-linux.
Reported-By: Simon Marchi <simark@simark.ca> Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
Sung-hun Kim [Mon, 13 May 2024 08:11:49 +0000 (17:11 +0900)]
RISC-V: PR31733, Change initial CFI operation from DW_CFA_def_cfa_register to DW_CFA_def_cfa
The DWARF specification (especially, DWARF4 and 5 [1,2]) states that
DW_CFA_def_cfa_register cannot be used as the first CFI operation.
It said DW_CFA_def_cfa_register as follows:
... This operation is valid only if the current CFA rule is defined
to use a register and offset.
So, DW_CFA_def_cfa_register can be used after that other definition
operation such as DW_CFA_def_cfa is called. However, the current gas
code emits DW_CFA_def_cfa_register as an initial CFI operation for RISCV.
In the libgcc, the unwinding function does not care about it, so it can
unwind the call stack. However, on the third party library such as
libunwindstack in Android, it causes a fatal error.
This patch changes the initial CFI operation to DW_CFA_def_cfa with
offset 0. It works as same as the previous one, but it does not have
any limitation so it satisfies the DWARF spec. This change resolves
the compatibility issue while preserving the original behaviour.
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com> Reviewed-By: Andrew Burgess <aburgess@redhat.com> Approved-By: Nelson Chu <nelson@rivosinc.com>
gas/
PR 31733
config/tc-riscv.c (riscv_cfi_frame_initial_instructions): Use
DW_CFA_def_cfa rather than DW_CFA_def_cfa_register.
Historically, we have used several APIs (perfctr, libcpc, perf_event_open) for profiling.
For each hardware we have several tables of hardware counters.
Some information is duplicated in these tables.
Some of the information is no longer used.
I did not touch the existing hwc tables.
I added a new hwc table for an AMD Zen3 machine.
ChangeLog
2024-05-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
PR gprofng/31123
* common/core_pcbe.c (core_pcbe_get_events): Add new argument.
* common/hwc_cpus.h: New constants for AMD hardware.
* common/hwcdrv.c: Add new argument to hwcdrv_get_descriptions.
Clean up the code.
* common/hwcdrv.h: Likewise.
* common/hwcfuncs.c (hwcdrv_get_descriptions): Add new argument.
* common/hwctable.c: Add the hwc table for AMD Zen3.
* src/hwc_amd_zen3.h: New file.
* common/opteron_pcbe.c: Add new argument to opt_pcbe_get_events.
* src/collctrl.cc: Remove unused variable.
* src/collctrl.h: Likewise.
interface with libcpc was used on Solaris.
gprofng doesn't support profiling on Solaris.
I removed this old code and other unused macros and variables.
gprofng/ChangeLog
2024-04-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
Tom Tromey [Tue, 16 Aug 2022 17:40:15 +0000 (11:40 -0600)]
Remove gdb_stdtargerr
This patch removes gdb_stdtargerr. There doesn't seem to be a need
for this -- it is always the same as stdtarg, and (I believe) has been
for many years.
Tom Tromey [Tue, 16 Aug 2022 15:31:33 +0000 (09:31 -0600)]
Don't allow new-ui to start the TUI
The TUI can't really work properly with new-ui, at least not as
currently written. This patch changes new-ui to reject an attempt.
Attempting to make a DAP ui this way is also now rejected.
Regression tested on x86-64 Fedora 38.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29273 Approved-By: Andrew Burgess <aburgess@redhat.com>
Dmitry.Neverov [Mon, 6 May 2024 15:09:17 +0000 (17:09 +0200)]
gdb/symtab: check name matches before expanding a CU
The added check fixes the case when an unqualified lookup
name without template arguments causes expansion of many CUs
which contain the name with template arguments.
This is similar to what dw2_expand_symtabs_matching_symbol does
before expanding the CU.
In the referenced issue the lookup name was wxObjectDataPtr and many
CUs had names like wxObjectDataPtr<wxBitmapBundleImpl>. This caused
their expansion and the lookup took around a minute. The added check
helps to avoid the expansion and makes the symbol lookup to return in
a second or so.
Nick Alcock [Fri, 26 Apr 2024 17:19:15 +0000 (18:19 +0100)]
libctf: fix leak of entire dict when dict opening fails
Ever since commit 1fa7a0c24e78e7f ("libctf: sort out potential refcount
loops") ctf_dict_close has only freed anything if the refcount on entry
to the function is precisely 1. >1 obviously just decrements the
refcount, but the linker machinery can sometimes cause freeing to recurse
from a dict to another dict and then back to the first dict again, so
we interpret a refcount of 0 as an indication that this is a recursive call
and we should just return, because a caller is already freeing this dict.
Unfortunately there is one situation in which this is not true: the bad:
codepath in ctf_bufopen entered when opening fails. Because the refcount is
bumped only at the very end of ctf_bufopen, any failure causes
ctf_dict_close to be entered with a refcount of zero, and it frees nothing
and we leak the entire dict.
The solution is to bump the refcount to 1 right before freeing... but this
codepath is clearly delicate enough that we need to properly validate it,
so we add a test that uses malloc interposition to count allocations and
frees, creates a dict, writes it out, intentionally corrupts it (by setting
a bunch of bytes after the header to a value high enough that it is
definitely not a valid CTF type kind), then tries to open it again and
counts the malloc/free pairs to make sure they're matched. (Test run only
on *-linux-gnu, because malloc interposition is not a thing you can rely
upon working everywhere, and this test is not arch-dependent so if it
passes on one arch it can be assumed to pass on all of them.)
libctf/
* ctf-open.c (ctf_bufopen): Bump the refcount on failure.
* testsuite/libctf-regression/open-error-free.*: New test.
Nick Alcock [Fri, 26 Apr 2024 17:16:49 +0000 (18:16 +0100)]
libctf: test: add wrapper
This .lk option lets you run the lookup program via a wrapper executable.
For example, to run under valgrind and check for leaks (albeit noisily
because of the libtool shell script wrapper):
Nick Alcock [Fri, 26 Apr 2024 17:10:00 +0000 (18:10 +0100)]
libctf: ctf_archive_iter: fix tiny leak
If iteration fails because opening a dict has failed, ctf_archive_next does
not destroy the iterator, so the caller can keep going and try to open other
dicts further into the archive. ctf_archive_iter just returns, though, so
it should free the iterator rather than leaking it.
libctf/
* ctf-archive.c (ctf_archive_iter): Don't leak the iterator on
failure.
Nick Alcock [Fri, 26 Apr 2024 17:09:38 +0000 (18:09 +0100)]
libctf: failure to open parent dicts that exist should be an error
CTF archive member opening (via ctf_arc_open_by_name, ctf_archive_iter, et
al) attempts to be helpful and auto-open and import any needed parent dict
in the same archive. But if this fails, the error is not reported but
simply discarded, and you silently get back a dict with no parent, that
*you* suddenly have to remember to import.
This is not helpful behaviour: if the parent is corrupted or we run out of
memory or something, the caller is going to want to know! Split it in two:
if the dict cites a parent that doesn't exist at all (a lot of historic
dicts name "PARENT" as their parent, even when they're not even children, or
perhaps the parent dict is stored separately and you plan to manually
associate it), we skip it as now, but if the import fails with an actual
error other than ECTF_ARNNAME, return the error and fail the open.
libctf/
* ctf-archive.c (ctf_arc_import_parent): Return failure if
parent opening fails for reasons other thnn nonexistence.
(ctf_dict_open_sections): Adjust.
Set DWARF2_CIE_DATA_ALIGNMENT (data alignment factors) to -8.
It helps to save space.
Data Alignment Factor
A signed LEB128 encoded value that is factored out of all offset
instructions that are associated with this CIE or its FDEs. This value
shall be multiplied by the register offset argument of an offset
instruction to obtain the new offset value.
Tom de Vries [Thu, 16 May 2024 20:28:07 +0000 (22:28 +0200)]
[gdb/testsuite] Add missing terminator in Dwarf::_macro_unit
When printing complaints with one of the execs from test-case
gdb.dwarf2/macro-source-path.exp, we run into:
...
$ gdb -q -batch \
-iex "set complaints 100" \
macro-source-path-clang14-dw4-absolute-cwd-32 \
-ex "p main"
During symbol reading: debug info runs off end of .debug_macro section \
[in module macro-source-path-clang14-dw4-absolute-cwd-32]
$1 = {int ()} 0x4004b7 <main>
...
and readelf complains more specifically:
...
Contents of the .debug_macro section:
The 'univeral_compile_options' in gdb.exp file only verifies the support
of '-fdiagnostics-color=never' for the "C" source file. So while running
tests with assembly source file (.s), many of them are not able to run
on icx/clang compilers because '-fdiagnostics-color=never' option is not
supported. This problem is not seen for the ".S" assembly source files so
these files are not handled separately. After this change, this function
is split into multiple functions to check the support for different type
of sources individually.
Before this change, in the case of clang and ICX compiler, this error is
shown for assembly source files (.s):
Simon Marchi [Thu, 16 May 2024 16:55:01 +0000 (12:55 -0400)]
gdb: define type aliases for `fork_inferior()` callbacks
The `fork_inferior()` function accepts multiple callbacks, making its
signature a bit hard to read. Define some type aliases to make it a bit
clearer. Use function view for all, while at it.
Change-Id: Ide8d1fa533d0c5eaf3249860f8c0d339baa09bce Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Thu, 16 May 2024 16:35:53 +0000 (12:35 -0400)]
gdb: initialize packet_result::m_textual_err_msg
When building GDB with -O2 and --enable-ubsan, I get some random errors
in the packet_result self test:
/home/smarchi/src/binutils-gdb/gdb/remote.c:161:7: runtime error: load of value 92, which is not a valid value for type 'bool'
This happens because packet_result::m_textual_err_msg is uninitialized
when using the second constructor. When such a packet_result object
gets copied, an invalid value for m_textual_err_msg (a bool field) is
loaded, which triggers ubsan.
Avoid this by initializing m_textual_err_msg.
Change-Id: I3ce44816bb0bfc6e442067292f993e5c17301b85 Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Wed, 15 May 2024 17:13:27 +0000 (13:13 -0400)]
gdb: move lm_info to solib in dsbt_current_sos
Commit 8971d2788e79 ("gdb: link so_list using intrusive_list")
mistakenly removed the line that moves the lm_info unique pointer to
sop->lm_info, probably due to a bad conflict resolution. Restore that
line.
Unfortunately, this code is only used for TI C66, which is not widely
tested (if used at all).
Change-Id: I9f64eb4430c324bc93ddb4bd00d820dee34adfbb Approved-By: Tom Tromey <tom@tromey.com>
aarch64: fp8 convert and scale - add sme2 insn variants
Add the SME2 variant of the FP8 convert and scale
instructions, enabled at assembly-time using the `+sme2+fp8'
architectural extension flag. More specifically, support is
added for the following instructions:
Multi-vector floating-point convert from FP8 to
BFloat16 (in-order):
-----------------------------------------------
aarch64: fp8 convert and scale - add sve2 insn variants
Add the SVE2 variant of the FP8 convert and scale instructions,
enabled at assembly-time using the `+sve2+fp8' architectural
extension flag. More specifically, support is added for the
following instructions:
FP8 convert to BFloat16 (bottom/top):
-------------------------------------
aarch64: fp8 convert and scale - Add advsimd insn variants
Add the advanced SIMD variant of the FP8 convert and scale
instructions, enabled at assembly-time using the `+fp8'
architectural extension flag. More specifically, support is
added for the following instructions:
FP8 convert to BFloat16 (vector):
---------------------------------
Pedro Alves [Tue, 14 May 2024 14:43:41 +0000 (15:43 +0100)]
Stop 'configure --enable-threading' if std::thread doesn't work
Currently, if you configure gdb with explicit --enable-threading, but
then configure detects std::thread does not work, configure silently
disables threading support and continues configuring.
This patch makes that scenario cause a configuration error, like so:
Richard Earnshaw [Wed, 15 May 2024 15:06:28 +0000 (16:06 +0100)]
arm: remove incorrect handling of FP bignums in move_or_literal_pool
This hunk of code in move_or_literal_pool just looks wrong, but I
can't find a testcase that will tickle it to prove it. It looks a bit
like it was intended to catch cases where a bignum contained a
floating-point value, but there were a number of problems with it.
- It tested X_add_number == -1, but an FP bignum is indicated by any
value <= 0.
- It converted the floating-point value to extended precision, but
that's not used on Arm beyond the legacy FPA code. No attempt was
made to match the FP value to the intended memory/mov operation.
Since I can't construct a viable testcase, I've just removed the existing
code and made the function error out in this case: this seems more sensible
than generating wrong code or trying to write something more complex that
can't be tested anyway.
Matthieu Longo [Tue, 27 Feb 2024 10:59:16 +0000 (10:59 +0000)]
aarch64: testsuite: reorder write and read to match macro order
This patch aims at grouping write and read for a same system register
one after another so that the diff for the macro replacement does not
generate too much noise.
Matthieu Longo [Tue, 27 Feb 2024 10:59:15 +0000 (10:59 +0000)]
aarch64: testsuite: use same regs for read and write tests
This patch aims at making easier to replacement of read and write
instructions to system registers by a macro that will use the same
registers for read and write.
Matthieu Longo [Tue, 27 Feb 2024 10:59:14 +0000 (10:59 +0000)]
aarch64: testsuite: replace instruction addresses by regex
This patch removes the instruction addresses from the objdump's expected
output (.d files). The intended benefit from this clean-up is to allow to
swap lines around more easilly, and removes the noise of patches that add,
remove or reorder instructions.
Tom de Vries [Wed, 15 May 2024 07:45:55 +0000 (09:45 +0200)]
[binutils/readelf] Fix handling of DW_MACRO_define_strx in dwo file
When printing a DW_MACRO_define_strx entry in a .debug_macro.dwo section, we
run into:
...
DW_MACRO_define_strx lineno : 0 macro : <no .debug_str_offsets section>
...
Fix this in display_debug_macro by passing the correct dwo argument to a
fetch_indexed_string call.
That works fine for readelf -w, with with readelf -wm we have:
...
DW_MACRO_define_strx lineno : 0 macro : <no .debug_str_offsets.dwo section>
...
Fix this in display_debug_macro by doing load_debug_section_with_follow for
str_dwo / str_index_dwo sections instead of str / str_index sections when
handling .debug_macro.dwo.
Tom de Vries [Wed, 15 May 2024 07:45:55 +0000 (09:45 +0200)]
[binutils/readelf] Fix printing of dwarf4 .debug_str_offsets.dwo
When compiling a hello world with dwarf4 split dwarf:
...
$ gcc -gdwarf-4 -gsplit-dwarf hello.c -save-temps -dA
...
we have in a-hello.s these three initial entries in .debug_str_offsets:
...
.section .debug_str_offsets.dwo,"e",@progbits
.4byte 0 // indexed string 0x0: short int
.4byte 0xa // indexed string 0x1: /home/vries/binutils
.4byte 0x1f // indexed string 0x2: main
...
but "readelf -ws a.out" starts at the third entry:
...
Contents of the .debug_str_offsets.dwo section (loaded from a-hello.dwo):
Length: 0x30
Index Offset [String]
0 00000000 main
...
This is a regression since commit 407115429b3 ("Modified changes for
split-dwarf and dwarf-5."), which introduced a variable
debug_str_offsets_hdr_len in display_debug_str_offsets.
Fix this by setting display_debug_str_offsets to 0 for the dwarf4 case.
Joseph Faulls [Tue, 14 May 2024 22:59:58 +0000 (06:59 +0800)]
RISC-V: Search for mapping symbols from the last one found
With previous behaviour, multiple mapping symbols within the same
function would result in all the mapping symbols being searched.
This could slow down disassembly dramatically.
Multiple mapping symbols within a function can be a result of encoding
instructions as data, like sometimes seen in random instruction
generators.
opcodes/ChangeLog:
* riscv-dis.c (riscv_search_mapping_symbol): Use last mapping
symbol if it exists.
Tom Tromey [Sat, 20 Apr 2024 22:33:37 +0000 (16:33 -0600)]
Add spaceship operator to cp-name-parser.y
While debugging gdb, I saw this:
During symbol reading: unexpected demangled name 'operator<=><std::chrono::_V2::system_clock, std::chrono::duration<long int>, std::chrono::duration<long int> >'
This happens because cp-name-parser.y does not handle the spaceship
operator. This patch implements this.
projects / thirdparty / binutils-gdb.git / log
