Jim Blandy [Wed, 28 Jan 2004 04:02:52 +0000 (04:02 +0000)]
Clean up misapplied patch:
* dwarf2read.c (determine_prefix): Change one of the two forward
declarations for 'determine_prefix_aux' to a declaration for this.
(read_func_scope): Use cu->language, not cu_language. Pass 'cu'
argument to 'die_specification'.
Andrew Cagney [Wed, 28 Jan 2004 01:39:51 +0000 (01:39 +0000)]
2004-01-27 Paul N. Hilfinger <hilfinger@gnat.com>
* breakpoint.c (breakpoint_re_set_one): Set b->cond, b->val, and
b->exp to NULL after freeing so that error during re-parsing or
evaluation of expressions associated with breakpoint don't
eventually lead to re-freeing of storage.
Committed by Andrew Cagney.
Elena Zannoni [Tue, 27 Jan 2004 22:25:15 +0000 (22:25 +0000)]
2004-01-27 Elena Zannoni <ezannoni@redhat.com>
Merge in official patches to readline-4.3 from
ftp://ftp.cwru.edu/pub/bash/readline-4.3-patches:
NOTE: Patch-ID readline-43-004 was already applied (see below).
* bind.c (rl_generic_bind): Pressing certain key sequences
causes an infinite loop in _rl_dispatch_subseq with the `key' argument
set to 256. This eventually causes bash to exceed the stack size
limit and crash with a segmentation violation.
Patch-ID: readline43-001.
* readline.c (_rl_dispatch_subseq): Repeating an edit in
vi-mode with `.' does not work.
Patch-ID: readline43-002.
* mbutil.c (_rl_get_char_len, _rl_compare_chars,
_rl_adjust_point): When in a locale with multibyte characters, the
readline display updater will occasionally cause a
segmentation fault when attempting to compute the length of the first
multibyte character on the line.
Patch-ID: readline43-003.
* vi_mode.c (_rl_vi_change_mbchar_case): Using the vi editing
mode's case-changing commands in a locale with multibyte characters
will cause garbage characters to be inserted into the editing buffer.
Patch-ID: readline43-005.
(dwarf_attr): Renamed to dwarf2_attr. Add CU argument.
(set_cu_language, die_is_declaration, die_specification)
(determine_prefix, determin_prefix_aux, class_name, namespace_name)
(dwarf2_linkage_name, dwarf2_name, dwarf2_extension)
(dwarf2_get_ref_die_offset, dwarf2_fundamental_type)
(initialize_cu_func_list, add_to_cu_func_list): Add CU argument.
(dwarf2_build_psymtabs_hard): Add local baseaddr. Initialize
cu.list_in_scope. Don't initialize cu_header_offset.
(add_partial_symbol): Add local baseaddr.
(psymtab_to_symtab_1): Add local baseaddr. Use
objfile->section_offsets for consistency. Don't initialize
cu_header_offset; do initialize cu.header.offset and
cu.list_in_scope.
(read_file_scope, read_func_scope, read_lexical_block_scope)
(dwarf_decode_lines, new_symbol): Add local baseaddr.
-#if 0
-/* These aren't used; I don't konw what they were for. */
-/* Set a breakpoint at the catch clause for NAME. */
-static int
-catch_breakpoint (char *name)
-{
-}
-
-static int
-disable_catch_breakpoint (void)
-{
-}
-
-static int
-delete_catch_breakpoint (void)
-{
-}
-
-static int
-enable_catch_breakpoint (void)
-{
-}
-#endif /* 0 */
-
static void
ep_skip_leading_whitespace (char **s)
{
@@ -6482,30 +6455,6 @@
b->thread = -1;
return b;
}
-
-#if 0
-/* These aren't used; I don't know what they were for. */
-/* Disable breakpoints on all catch clauses described in ARGS. */
-static void
-disable_catch (char *args)
-{
- /* Map the disable command to catch clauses described in ARGS. */
-}
-
-/* Enable breakpoints on all catch clauses described in ARGS. */
-static void
-enable_catch (char *args)
-{
- /* Map the disable command to catch clauses described in ARGS. */
-}
-
-/* Delete breakpoints on all catch clauses in the active scope. */
-static void
-delete_catch (char *args)
-{
- /* Map the delete command to catch clauses described in ARGS. */
-}
-#endif /* 0 */
static void
catch_command (char *arg, int from_tty)
Nick Clifton [Mon, 26 Jan 2004 18:09:30 +0000 (18:09 +0000)]
(EXTERN_FORCE_RELOC): Handle m68k-uclinux specially, like m68k-elf.
(RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead of hard-coded test for
TARGET_OS=elf.
Mark Kettenis [Sun, 25 Jan 2004 12:10:55 +0000 (12:10 +0000)]
* sparc-tdep.c (sparc_regset_from_core_section): Check whether
SECT_SIZE is large enough, not wheter it's exactly the right size.
(sparc32_gdbarch_init): Initialize TDEP->sizeof_gregset and
TDEP->fpregset to zero.
Mark Kettenis [Sun, 25 Jan 2004 12:03:36 +0000 (12:03 +0000)]
* sparcnbsd-tdep.c (sparc32nbsd_supply_gregset): Also sipply the
floating-point registers for traditional NetBSD core files.
(sparc32nbsd_init_abi): Initialize TDEP->sizeof_gregset and
TDEP->sizeof_fpregset here.
Mark Kettenis [Sun, 25 Jan 2004 11:46:45 +0000 (11:46 +0000)]
* sparc-tdep.h (sparc32nbsd_sigcontext_saved_regs): New prototype.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): New
function with code split out from
sparc32nbsd_sigcontext_frame_cache.
(sparc32nbsd_sigcontext_frame_cache): Use
sparc32nbsd_sigcontext_saved_regs.
(_initialize_sparc32nbsd_tdep): Don't register OS ABI handler for
OpenBSD.
* sparcobsd-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add sparcobsd-tdep.c.
(sparcobsd-tdep.o): New dependency.
* configure.tgt (sparc-*-openbsd*): Set gdb_target to obsd.
* config/sparc/obsd.mt: New file.
Chris Demetriou [Sun, 25 Jan 2004 06:01:03 +0000 (06:01 +0000)]
2004-01-24 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (hilo_interlocks): Change definition
so that MIPS32, MIPS64 and later ISAs are included, along with
the already-included machines. Update comments.
Chris Demetriou [Sun, 25 Jan 2004 03:01:42 +0000 (03:01 +0000)]
2004-01-24 Chris Demetriou <cgd@broadcom.com>
* gas/mips/relax-swap1.s: Add extra space at end, so the
disassembly will consistently have "..." at its end.
* gas/mips/relax-swap2.s: Likewise.
* gas/mips/relax-swap1-mips2.d: Expect "..." at end of disassembly.
Mark Kettenis [Sat, 24 Jan 2004 22:18:22 +0000 (22:18 +0000)]
* sparc64-tdep.h (stryct_frame_info, struct trad_frame_saved_reg):
Add opaque declarations.
(sparc64nbsd_sigcontext_saved_regs): New prototype.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): New
function with code split out from
sparc64nbsd_sigcontext_frame_cache.
(sparc64nbsd_sigcontext_frame_cache): Use
sparc64nbsd_sigcontext_saved_regs.
(_initialize_sparc64nbsd_tdep): Don't register OS ABI handler for
OpenBSD.
* sparc64obsd-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add sparc64obsd-tdep.c.
(sparc64obsd-tdep.o): New dependency.
* configure.tgt (sparc64-*-openbsd*): Set gdb_target to obsd64 and
gdb_osabi to GDB_OSABI_OPENBSD_ELF.
* config/sparc/obsd64.mt: New file.
Michael Chastain [Sat, 24 Jan 2004 21:59:03 +0000 (21:59 +0000)]
2004-01-24 Michael Chastain <mec.gnu@mindspring.com>
* lib/compiler.c: Add hp_cc_compiler and hp_aCC_compiler.
* lib/compiler.cc: Likewise.
* lib/gdb.exp (get_compiler_info): Always call gdb_compile to
get the right preprocessor. Eval the output directly. Remove
special tests for hp_cc_compiler and hp_aCC_compiler. Remove
hp_f77_compiler and hp_f90_compiler completely.
(gdb_preprocess): Delete.
(get_compiler): Delete.
Mark Kettenis [Sat, 24 Jan 2004 20:55:41 +0000 (20:55 +0000)]
* sparcnbsd-tdep.c (GDB_OSABI_NETBSD_CORE): Define, based on the
value of GDB_OSABI_DEFAULT.
(sparcnbsd_core_osabi_sniffer): Return GDB_OSABI_NETBSD_CORE
instead of GDB_OSABI_NETBSD_AOUT.
* gdb.cp/rtti.exp: Don't include full path in ${srcfile}. Add
test for cp_lookup_transparent_type.
* gdb.cp/rtti1.cc: Update copyright. Add n2::func and refer_to;
call them.
David Carlton [Fri, 23 Jan 2004 22:41:28 +0000 (22:41 +0000)]
2004-01-23 David Carlton <carlton@kealia.com>
Patch for PR c++/1520:
* dwarf2read.c (read_func_scope): Set processing_current_prefix
properly if we have a specification die.
(determine_prefix_aux): Rename from determine_prefix.
(determine_prefix): Like the old determine_prefix, but never
returns NULL.
* config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
(RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
(RELAX_USE_SECOND): Bump to 0x10000.
(RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
(mips_macro_warning): New variable.
(md_assemble): Wrap macro expansion in macro_start() and macro_end().
(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
(relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
of RELAX_ENCODE.
(append_insn): Update mips_macro_warning.sizes.
(macro_start, macro_warning, macro_end): New functions.
(macro_build): Don't emit warnings here.
(macro_build_lui, md_estimate_size_before_relax): ...or here.
(md_convert_frag): Check for cases where one macro alternative
needs a warning and the other doesn't. Emit a warning if the
longer sequence was chosen.
* config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
* config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
the first sequence, the size of the second sequence, and a flag
that says whether we should warn.
(RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
(RELAX_FIRST, RELAX_SECOND): New.
(mips_relax): New variable.
(relax_close_frag, relax_start, relax_switch, relax_end): New fns.
(append_insn): Remove "place" argument. Use mips_relax.sequence
rather than "place" to check whether we're expanding the second
alternative of a relaxable macro. Remove redundant check for
branch relaxation. If generating a normal insn, and there
is not enough room in the current frag, call relax_close_frag()
to close it. Update mips_relax.sizes[]. Emit fixups for the
second version of a relaxable macro. Record the first relaxable
fixup in mips_relax. Remove tc_gen_reloc workaround.
(macro_build): Remove all uses of "place". Use mips_relax.sequence
in the same way as in append_insn.
(mips16_macro_build): Remove "place" argument.
(macro_build_lui): As for macro_build. Don't drop the add_symbol
when generating the second version of a relaxable macro.
(load_got_offset, add_got_offset): New functions.
(load_address, macro): Use new relaxation machinery. Remove
tc_gen_reloc workarounds.
(md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
version of a relaxable macro is needed. Return -RELAX_SECOND if the
first version is needed.
(tc_gen_reloc): Remove relaxation handling.
(md_convert_frag): Go through the fixups for a relaxable macro and
mark those that belong to the unneeded alternative as done. If the
second alternative is needed, adjust the fixup addresses to account
for the deleted first alternative.
testsuite/
* gas/mips/elf-rel19.[sd]: New test.
* gas/mips/mips.exp: Run it.
David Carlton [Thu, 22 Jan 2004 19:56:54 +0000 (19:56 +0000)]
2004-01-22 David Carlton <carlton@kealia.com>
* dwarf2read.c (psymtab_to_symtab_1): Calculate lowpc, highpc via
get_scope_pc_bounds.
(read_file_scope): Ditto.
(get_scope_pc_bounds): New function, produced by extracting code
from the above two functions, consolidating it, and adding support
for DW_TAG_namespace.
Eli Zaretskii [Wed, 21 Jan 2004 18:46:23 +0000 (18:46 +0000)]
* utils.c (init_page_info): Move declarations of `rows' and
`cols' before the __GO32__-specific code. Move the closing brace
outside the #ifdef __GO32__..#endif block.
[__GO32__]: Use `rows' and `cols' to avoid compiler warnings.