[why]
Flickering observed. Regression search pointed to this being
the offending commit.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Tue, 21 Nov 2023 03:06:51 +0000 (11:06 +0800)]
drm/amdgpu: fix memory overflow in the IB test
Fix a memory overflow issue in the gfx IB test
for some ASICs. At least 20 bytes are needed for
the IB test packet.
v2: correct code indentation errors. (Christian)
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Li Ma [Tue, 21 Nov 2023 08:54:59 +0000 (16:54 +0800)]
drm/amdgpu: add init_registers for nbio v7.11
enable init_registers callback func for nbio v7.11.
Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 9 Nov 2023 15:50:30 +0000 (10:50 -0500)]
drm/amd/display: Enable SubVP on 1080p60 displays
[Description]
- Previously SubVP would never be selected on 1080p60 displays because
it has too much vactive margin. However, implement a change to allow
it like how 1440p60 is allowed.
- Add a new struct such that we have a list of allowed modes for
enabling subvp with vactive margin (currently 1080p60 and 1440p60)
- Also ensure to block drr + vblank cases to prevent unexpected
enablement of new display configs
- Update SW cursor fallback for these new potential cases as well
Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Chan [Tue, 31 Oct 2023 02:09:02 +0000 (10:09 +0800)]
drm/amd/display: Disable Timing sync check in Full-Screen Video Case
[why]
If Panel max link off frame count is low, it will cause low residency
for Replay, then Disabled timing sync check in Full screen Video Case.
Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Mon, 7 Aug 2023 07:34:39 +0000 (15:34 +0800)]
drm/amd/display: adjust flow for deallocation mst payload
[Why]
MST relevant variables are maintained at drm side. As the result, we
still have to call drm_dp_remove_payload_part2() to update the relevant
values regardless the link is under mst mode or not. We used to have a
workaround patch to tackle this: commit 3d8fcc6740c9 ("drm/amd/display:
Extract temp drm mst deallocation wa into its own function")
Now it's time to remove the workaround and adjust the flow.
[How]
During deallocate_mst_payload(), source actually doesn't send out
ALLOCATE_PAYLOAD at the end as like the flow in allocate_mst_payload().
Call function dm_helpers_dp_mst_send_payload_allocation() at the end of
deallocate_mst_payload() is a bit confusing.
Separate dm_helpers_dp_mst_send_payload_allocation() into 2 functions.
Have a new function dm_helpers_dp_mst_update_mst_mgr_for_deallocation()
to replace dm_helpers_dp_mst_send_payload_allocation() for payload
deallocation.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Remove the brightness cache in DC. It uses a single value to represent
the brightness for both SDR and HDR mode. This leads to flash in HDR
on/off. It also unconditionally programs brightness as in HDR mode. This
may introduce garbage on SDR mode in miniLED panel.
[How]
Simplify the initialization flow by removing the DC cache and taking
what panel has as default. Expand the mechanism for PWM to DPCD Aux to
restore cached brightness value generally.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Camille Cho <camille.cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sending certain Frameupdate number for Replay Power Evaluation
Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 8 Nov 2023 22:16:28 +0000 (17:16 -0500)]
drm/amd/display: Increase num voltage states to 40
[Description]
If during driver init stage there are greater than 20
intermediary voltage states while constructing the SOC
BB we could hit issues because we will index outside of the
clock_limits array and start overwriting data. Increase the
total number of states to 40 to avoid this issue.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Fri, 27 Oct 2023 18:12:51 +0000 (14:12 -0400)]
drm/amd/display: Do not read DPREFCLK spread info from LUT on DCN35
[WHY]
Currently DCN35 does not spread DPREFCLK
[HOW]
Remove hardcoded table with nonzero caps
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Max Tseng [Tue, 7 Nov 2023 07:00:03 +0000 (15:00 +0800)]
drm/amd/display: replay: generalize the send command function usage
Augment the function to allow send different format data in different
use case.
Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 7 Nov 2023 22:01:49 +0000 (17:01 -0500)]
drm/amd/display: Use DRAM speed from validation for dummy p-state
[Description]
When choosing which dummy p-state latency to use, we
need to use the DRAM speed from validation. The DRAMSpeed
DML variable can change because we use different input
params to DML when populating watermarks set B.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Feed SR and Z8 watermarks into DML2 for DCN35
[Why]
We've updated the table but the values aren't being reflected in DML2
calculation.
[How]
Pass them into the bbox overrides.
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Sierra [Mon, 20 Nov 2023 17:31:32 +0000 (11:31 -0600)]
drm/amdgpu: Force order between a read and write to the same address
Setting register to force ordering to prevent read/write or write/read
hazards for un-cached modes.
Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 20 Nov 2023 02:14:21 +0000 (10:14 +0800)]
drm/amdgpu: Do not issue gpu reset from nbio v7_9 bif interrupt
In nbio v7_9, host driver should not issu gpu reset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add Z8 watermarks for DML2 bbox overrides
[Why]
We can override SR watermarks but not Z8 ones.
[How]
Add new parameters for Z8 matching the SR ones and feed them into the
states.
These also weren't being applied to every state, so make sure that
we loop over and update all SOC states if given an override.
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 2 Nov 2023 19:02:42 +0000 (15:02 -0400)]
drm/amd/display: always use mpc factor of 2 for stereo timings
[why]
In the new pipe resource management logic, the special handling for
stereo timings is missing.
This commit implements the same stereo timings handling as old
pipe resource management code.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Tue, 1 Aug 2023 14:37:41 +0000 (10:37 -0400)]
drm/amdgpu: optimize RLC powerdown notification on Vangogh
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 20 Nov 2023 03:04:45 +0000 (11:04 +0800)]
drm/amdgpu: Retire query/reset_ras_err_status from gfx_v9_4_3
Not needed anymore.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 6 Nov 2023 21:47:19 +0000 (16:47 -0500)]
drm/amd/display: fix a pipe mapping error in dcn32_fpu
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ian Chen [Mon, 6 Nov 2023 07:46:19 +0000 (15:46 +0800)]
drm/amd/display: add skip_implict_edp_power_control flag for dce110
If the link requests to skip implicit eDP power control, we should honor
that request.
Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update to the new values per HW team request. Affects both stutter
and z8.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Yat Sin [Fri, 17 Nov 2023 05:16:59 +0000 (05:16 +0000)]
drm/amdkfd: Copy HW exception data to user event
Fixes issue where user events of type KFD_EVENT_TYPE_HW_EXCEPTION do not
have valid data
Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add z-state support policy for dcn35
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Mon, 6 Nov 2023 16:20:15 +0000 (11:20 -0500)]
drm/amd/display: Include udelay when waiting for INBOX0 ACK
When waiting for the ACK for INBOX0 message,
we have to ensure to include the udelay
for proper wait time
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove redundant DRM device struct in amdgpu_dm_, mst_types.c
Declaration of 'struct drm_device *dev' is redundant, as
'connector->dev' & 'dev_get_drvdata(kdev)' can be directly passed to
'drm_to_adev', without any intermediate DRM device 'dev' variable
Cc: Roman Li <roman.li@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add function parameter 'xcc_mask' not described in 'amdgpu_vm_flush_compute_tlb'
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1373: warning: Function parameter or member 'xcc_mask' not described in 'amdgpu_vm_flush_compute_tlb'
Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 9 Nov 2023 03:37:18 +0000 (11:37 +0800)]
drm/amdgpu: add amdgpu runpm usage trace for separate funcs
Add trace for amdgpu runpm separate funcs usage and this will
help debugging on the case of runpm usage missed to dereference.
In the normal case the runpm usage count referred by one kind
of functionality pairwise and usage should be changed from 1 to 0,
otherwise there will be an issue in the amdgpu runpm usage
dereference.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shiwu Zhang [Tue, 31 Oct 2023 04:32:54 +0000 (12:32 +0800)]
drm/amdgpu: expose the connected port num info through sysfs
By catting the xgmi_port_num sysfs node, it prints out the info in the
format of <src node id>:<src port num> -> <dst node id>:<dst port num>
for one xgmi link.
For example, in case of 4 sockets fully and evenly connected setup, it
would be like as below for the first node in the hive.
01:02 -> 02:03
01:03 -> 02:02
01:07 -> 03:04
01:04 -> 03:07
01:06 -> 04:05
01:05 -> 04:06
Based on the fact that there is two xgmi links between each socket pair,
"01:02 -> 02:03" means that the current socket in question use the port 2
to connect with port 3 of the second node in the hive and so on.
v2: print out the src/dst node id for each xgmi link (lijo)
v3: replace the current_node++ with +1 to align with dst node (le)
and use the dev_err instead of pr_err (lijo)
v4: fix checkpatch warning (alex)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 6 Nov 2023 01:22:06 +0000 (20:22 -0500)]
drm/amd/display: Promote DC to 3.2.260
- Add missing chips for HDCP
- Add new command to disable replay timing resync
- Fix encoder disable logic
- Enable DSC Flag in MST Mode Validation
- Change the DMCUB mailbox memory location from FB to inbox
- Add disable timeout option
- Negate IPS allow and commit bits
- Enable DCN clock gating for DCN35
- Prefer currently used OTG master when acquiring free pipe
- Try to acquire a free OTG master not used in cur ctx first
- Clear dpcd_sink_ext_caps if not set
- Enable fast plane updates on DCN3.2 and above
- Add null checks for 8K60 lightup
- Refactor resource into component directory
- Fix DSC not Enabled on Direct MST Sink
- Guard against invalid RPTR/WPTR being set
- Enable CM low mem power optimization
- Fix a debugfs null pointer error
Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Exclude dGPUs in eGPU enclosures from DPM quirks
The PCIe speed capabilities advertised by a USB4 or TBT3 link are
limited to PCIe gen 1 per the USB4 spec. In reality the speed will
change dynamically based on fabric conditions and other traffic.
DPM is disabled when dGPUs are connected directly to Intel hosts
since the PCIe root port isn't able to handle dynamic speed
switching.
As this limitation is specifically for PCIe root ports in the SoC,
don't apply it when connected to an eGPU enclosure connected to an
Intel host.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2885 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Use the first non-dGPU PCI device for BW limits
When bandwidth limits are looked up using pcie_bandwidth_available()
virtual links such as USB4 are analyzed which might not represent the
real speed. Furthermore devices may change speeds autonomously which
may introduce conditional variation to the results reported in the
status registers.
Instead look at the capabilities of first PCI device outside of
dGPU to decide upper limits that the dGPU will work at.
For eGPU this effectively means that it will use the speed of the link
partner.
Anthony Koo [Sat, 4 Nov 2023 05:53:13 +0000 (01:53 -0400)]
drm/amd/display: Add new command to disable replay timing resync
[WHY & HOW]
Add new command to disable replay timing resync
Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Mon, 30 Oct 2023 20:23:08 +0000 (16:23 -0400)]
drm/amd/display: Enable DSC Flag in MST Mode Validation
[WHY & HOW]
When dsc is possible, MST mode validation includes:
1. if maximum dsc compression cannot fit into end to end bw, mode pruned
2. if native bw cannot fit into end to end bw, try to enabled dsc to see
whether a feasible dsc config can be found
3. if native bw can fit into end to end bw, mode supported
Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Tue, 31 Oct 2023 20:57:36 +0000 (16:57 -0400)]
drm/amd/display: Add disable timeout option
[WHY]
Driver continues running whenever there is
is timeout from smu or dmcub.
It is difficult to track failure state
when dcn, dc or dmcub changes on root failure.
[HOW]
Add disable_timeout option to halt driver
whenever there is a failure in response.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Thu, 12 Oct 2023 16:55:47 +0000 (12:55 -0400)]
drm/amd/display: Enable DCN clock gating for DCN35
[WHY & HOW]
Enable DCN clock gating for DCN35.
Disable DTBCLK gate before link training
and re-enable afterwards
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 30 Oct 2023 19:21:12 +0000 (15:21 -0400)]
drm/amd/display: Prefer currently used OTG master when acquiring free pipe
[WHY & HOW]
When acquiring an OTG master pipe we should prefer currently enabled OTG
master pipes first. If there are no free pipes used as current OTG
master pipe then we will try to acquire a currently unused free pipe as
new OTG master instead of tearing down current secondary pipes from ODM
or MPC combine.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 20 Oct 2023 20:26:19 +0000 (16:26 -0400)]
drm/amd/display: Try to acquire a free OTG master not used in cur ctx first
[WHY & HOW]
The current otg master pipe allocation logic is not optimized based
current resource context. We should try to acquire a free OTG master not
used in cur cts first to avoid unnecessary pipe switch from current
state.
Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mounika Adhuri [Fri, 6 Oct 2023 09:35:42 +0000 (15:05 +0530)]
drm/amd/display: Refactor resource into component directory
[WHY]
Move all resource files to unique folder resource.
[HOW]
Created resource folder in dc, moved the
dcnxx_resource.c and dcnxx_resource.h files into
corresponding new folders inside the resource and
made appropriate changes for compilation in Makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Thu, 9 Nov 2023 21:42:32 +0000 (16:42 -0500)]
drm/amd/display: add a debugfs interface for the DMUB trace mask
For features that are implemented primarily in DMUB (e.g. PSR), it is
useful to be able to trace them at a DMUB level from the kernel,
especially when debugging issues. So, introduce a debugfs interface that
is able to read and set the DMUB trace mask dynamically at runtime and
document how to use it.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yihan Zhu [Mon, 30 Oct 2023 17:29:51 +0000 (13:29 -0400)]
drm/amd/display: Enable CM low mem power optimization
[WHY & HOW]
MPC MCM low mem power optimization still causes color distortion on
first SCE enablement, only forces light sleep for it.
DPP low memory power optimization still needs this bit to save power.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Yihan Zhu <yihan.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Fri, 27 Oct 2023 19:59:48 +0000 (15:59 -0400)]
drm/amd/display: Fix a debugfs null pointer error
[WHY & HOW]
Check whether get_subvp_en() callback exists before calling it.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdkfd: Clear the VALU exception state in the trap handler
The trap handler could be entered with pending VALU exceptions, so
clear the exception state before issuing vector instructions.
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com> Tested-by: Lancelot Six <lancelot.six@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Refactor 'amdgpu_connector_dvi_detect' in amdgpu_connectors.c
Fixes the below:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
WARNING: Too many leading tabs - consider code refactoring
+ if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
WARNING: Too many leading tabs - consider code refactoring
+ if (!amdgpu_display_hpd_sense(adev, amdgpu_connector->hpd.hpd)) {
Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abhinav Singh [Fri, 3 Nov 2023 15:50:13 +0000 (21:20 +0530)]
drm/radeon: Fix warning using plain integer as NULL
sparse static analysis tools generate a warning with this message
"Using plain integer as NULL pointer". In this case this warning is
being shown because we are trying to intialize a pointer to NULL using
integer value 0.
Signed-off-by: Abhinav Singh <singhabhinav9051571833@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sam James [Sun, 5 Nov 2023 16:06:50 +0000 (16:06 +0000)]
amdgpu: Adjust kmalloc_array calls for new -Walloc-size
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
on various files in drivers/gpu/drm/amd/amdgpu like:
```
amdgpu_amdkfd_gfx_v8.c:241:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]'} with size ‘8’ [-Werror=alloc-size]
```
This is because each HQD_N_REGS is actually a uint32_t[2]. Move the * 2 to
the size argument so GCC sees we're allocating enough.
Originally did 'sizeof(uint32_t) * 2' for the size but a friend suggested
'sizeof(**dump)' better communicates the intent.
Felix Kuehling [Fri, 24 Feb 2023 23:22:32 +0000 (18:22 -0500)]
drm/amdkfd: Move TLB flushing logic into amdgpu
This will make it possible for amdgpu GEM ioctls to flush TLBs on compute
VMs.
This removes VMID-based TLB flushing and always uses PASID-based
flushing. This still works because it scans the VMID-PASID mapping
registers to find the right VMID. It's only slightly less efficient. This
is not a production use case.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 16 Mar 2022 22:46:56 +0000 (18:46 -0400)]
drm/amdgpu: update mappings not managed by KFD
When restoring after an eviction, use amdgpu_vm_handle_moved to update
BO VA mappings in KFD VMs that are not managed through the KFD API. This
should allow using the render node API to create more flexible memory
mappings in KFD VMs.
v2: rebase on drm_exec changes (Alex)
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Implement a new 64bit sequence memory driver
Developed a new driver which allocates a 64bit memory on
each request in sequence order. At the moment, user queue
fence memory is the main consumer of this seq64 driver.
v2: Worked on review comments from Christian for the following
modifications
- Move driver name from "semaphore" to "seq64"
- Remove unnecessary PT/PD mapping
- Move enable_mes check into init/fini functions.
v3: Worked on review comments from Christian
- drop enable_mes check
- use DECLARE_BITMAP for bit array
- added kerneldoc for seq64
v4: Worked on review comments from Christian
- Rename amdgpu_seq64_get name with amdgpu_seq64_alloc
v5: Worked on review comments from Christian
- Fix seq64 lockdep warning
- move fpriv->seq64_va check into amdgpu_seq64_unmap()
- make the function amdgpu_seq64_unmap() return as void.
- reserve the buffers as not interruptible.
v6: port to drm_exec (Alex)
v7: disable for now (Arun)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Nov 2023 20:40:00 +0000 (15:40 -0500)]
drm/amdgpu/gmc9: disable AGP aperture
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Nov 2023 20:38:54 +0000 (15:38 -0500)]
drm/amdgpu/gmc10: disable AGP aperture
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Nov 2023 20:34:19 +0000 (15:34 -0500)]
drm/amdgpu/gmc11: disable AGP aperture
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Nov 2023 20:31:00 +0000 (15:31 -0500)]
drm/amdgpu: add a module parameter to control the AGP aperture
Add a module parameter to control the AGP aperture. The AGP
aperture is an aperture in the GPU's internal address space
which provides direct non-paged access to the platform address
space. This access is non-snooped so only uncached memory
can be accessed.
Add a knob so that we can toggle this for debugging.
Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 14 Nov 2023 16:36:56 +0000 (11:36 -0500)]
drm/amdgpu/gmc11: fix logic typo in AGP check
Should be && rather than ||.
Fixes: b2e1cbe6281f ("drm/amdgpu/gmc11: disable AGP on GC 11.5") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DENTIST hangs when OTG is off and encoder is on. We were not
disabling the encoder properly when switching from extended mode to
external monitor only.
[HOW]
Disable the encoder using an existing enable/disable fifo helper instead
of enc35_stream_encoder_enable.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lewis Huang [Thu, 19 Oct 2023 09:22:21 +0000 (17:22 +0800)]
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Wed, 25 Oct 2023 23:07:21 +0000 (19:07 -0400)]
drm/amd/display: Negate IPS allow and commit bits
[WHY]
On s0i3, IPS mask isn't saved and restored.
It is reset to zero on exit.
If it is cleared unexpectedly, driver will
proceed operations while DCN is in IPS2 and
cause a hang.
[HOW]
Negate the bit logic. Default value of
zero indicates it is still in IPS2. Driver
must poll for the bit to assert.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Fri, 10 Nov 2023 07:45:39 +0000 (13:15 +0530)]
drm/amd/pm: Don't send unload message for reset
No need to notify about unload during reset. Also remove the FW version
check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Mon, 13 Nov 2023 06:34:55 +0000 (14:34 +0800)]
drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c
fix ras err_data null pointer issue in amdgpu_ras.c
Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Wed, 25 Oct 2023 02:53:35 +0000 (10:53 +0800)]
drm/amd/display: Clear dpcd_sink_ext_caps if not set
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tianci Yin [Wed, 1 Nov 2023 01:47:13 +0000 (09:47 +0800)]
drm/amd/display: Enable fast plane updates on DCN3.2 and above
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
José Pekkarinen [Tue, 14 Nov 2023 15:27:51 +0000 (17:27 +0200)]
drm/amd/display: fix NULL dereference
The following patch will fix a minor issue where a debug message is
referencing an struct that has just being checked whether is null or
not. This has been noticed by using coccinelle, in the following output:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced.
Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros") Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1") Link: https://github.com/fwupd/fwupd/issues/6327 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Muhammad Ahmed [Tue, 31 Oct 2023 20:03:21 +0000 (16:03 -0400)]
drm/amd/display: Add null checks for 8K60 lightup
[WHY & HOW]
Add some null checks to fix an issue where 8k60
tiled display fails to light up.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Tue, 14 Nov 2023 08:17:17 +0000 (16:17 +0800)]
drm/amd/pm: Fill pcie error counters for gpu v1_4
Fill PCIE error counters & instantaneous bandwidth
in gpu metrics v1_4 for smu v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Mon, 30 Oct 2023 19:14:02 +0000 (03:14 +0800)]
drm/amd/pm: Update metric table for smu v13_0_6
Update pmfw metric table to include pcie
instantaneous bandwidth & pcie error counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YuanShang [Tue, 31 Oct 2023 02:32:37 +0000 (10:32 +0800)]
drm/amdgpu: correct chunk_ptr to a pointer to chunk.
The variable "chunk_ptr" should be a pointer pointing
to a struct drm_amdgpu_cs_chunk instead of to a pointer
of that.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Mon, 23 Oct 2023 17:57:32 +0000 (13:57 -0400)]
drm/amd/display: Fix DSC not Enabled on Direct MST Sink
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Roman Li <roman.li@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Address member 'ring' not described in 'amdgpu_ vce, uvd_entity_init()'
Fixes the following:
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init'
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init'
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Wed, 4 Oct 2023 18:24:15 +0000 (14:24 -0400)]
drm/amdgpu: Do not program VF copy regs in mmhub v1.8 under SRIOV (v2)
MC_VM_AGP_* registers should not be programmed by guest driver.
v2: move early return outside of loop
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Samir Dhume <samir.dhume@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Guard against invalid RPTR/WPTR being set
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Miri Korenblit [Sun, 12 Nov 2023 14:36:20 +0000 (16:36 +0200)]
wifi: iwlwifi: fix system commands group ordering
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Linus Torvalds [Sun, 12 Nov 2023 19:05:31 +0000 (11:05 -0800)]
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
Linus Torvalds [Sun, 12 Nov 2023 18:58:08 +0000 (10:58 -0800)]
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
Linus Torvalds [Sun, 12 Nov 2023 01:17:22 +0000 (17:17 -0800)]
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
Linus Torvalds [Sat, 11 Nov 2023 00:35:04 +0000 (16:35 -0800)]
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
projects / thirdparty / linux.git / log
