The vsock flags can be set during the connect() setup logic, when
initializing the vsock address data structure variable. Then the vsock
transport is assigned, also considering this flags field.
The vsock transport is also assigned on the (listen) receive path. The
flags field needs to be set considering the use case.
Set the value of the vsock flags of the remote address to the one
targeted for packets forwarding to the host, if the following conditions
are met:
* The source CID of the packet is higher than VMADDR_CID_HOST.
* The destination CID of the packet is higher than VMADDR_CID_HOST.
Changelog
v3 -> v4
* No changes.
v2 -> v3
* No changes.
v1 -> v2
* Set the vsock flag on the receive path in the vsock transport
assignment logic.
* Use bitwise operator for the vsock flag setup.
* Use the updated "VMADDR_FLAG_TO_HOST" flag naming.
Add VMADDR_FLAG_TO_HOST vsock flag that is used to setup a vsock
connection where all the packets are forwarded to the host.
Then, using this type of vsock channel, vsock communication between
sibling VMs can be built on top of it.
Changelog
v3 -> v4
* Update the "VMADDR_FLAG_TO_HOST" value, as the size of the field has
been updated to 1 byte.
v2 -> v3
* Update comments to mention when the flag is set in the connect and
listen paths.
v1 -> v2
* New patch in v2, it was split from the first patch in the series.
* Remove the default value for the vsock flags field.
* Update the naming for the vsock flag to "VMADDR_FLAG_TO_HOST".
vsock enables communication between virtual machines and the host they
are running on. With the multi transport support (guest->host and
host->guest), nested VMs can also use vsock channels for communication.
In addition to this, by default, all the vsock packets are forwarded to
the host, if no host->guest transport is loaded. This behavior can be
implicitly used for enabling vsock communication between sibling VMs.
Add a flags field in the vsock address data structure that can be used
to explicitly mark the vsock connection as being targeted for a certain
type of communication. This way, can distinguish between different use
cases such as nested VMs and sibling VMs.
This field can be set when initializing the vsock address variable used
for the connect() call.
Changelog
v3 -> v4
* Update the size of "svm_flags" field to be 1 byte instead of 2 bytes.
v2 -> v3
* Add "svm_flags" as a new field, not reusing "svm_reserved1".
v1 -> v2
* Update the field name to "svm_flags".
* Split the current patch in 2 patches.
Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure") Reported-by: syzbot+d333febcf8f4bc5f6110@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=27169a847a70550d17be Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech> Link: https://patch.msgid.link/20250702014350.692213-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b934526 ("parallel lookups machinery, part 4 (and last)") Reported-by: NeilBrown <neilb@brown.name> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann reports that uprobes can be used destructively when used in the
middle of an instruction. The kernel only verifies there is a valid
instruction at the requested offset, but due to variable instruction
length cannot determine if this is an instruction as seen by the
intended execution stream.
Additionally, Mark Rutland notes that on architectures that mix data
in the text segment (like arm64), a similar things can be done if the
data word is 'mistaken' for an instruction.
When USRC=0, there is underrun issue for the non-ideal ratio mode;
according to the reference mannual, the internal measured ratio can be
used with USRC=1 and IDRC=0.
Fixes: d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20250625020504.2728161-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If there's support for another console device (such as a TTY serial),
the kernel occasionally panics during boot. The panic message and a
relevant snippet of the call stack is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000
Call trace:
drm_crtc_handle_vblank+0x10/0x30 (P)
decon_irq_handler+0x88/0xb4
[...]
Otherwise, the panics don't happen. This indicates that it's some sort
of race condition.
Add a check to validate if the drm device can handle vblanks before
calling drm_crtc_handle_vblank() to avoid this.
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with older versions of clang (15 through 17) show an
instance of -Wframe-larger-than (which breaks the build with
CONFIG_WERROR=y):
This comes from aes_decipher() being inlined in rtw_aes_decrypt().
Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher()
also uses a decent amount of stack, just under the limit of 2048:
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
-Rpass-analysis=stack-frame-layout only shows one large structure on the
stack, which is the ctx variable inlined from aes128k128d(). A good
number of the other variables come from the additional checks of
fortified string routines, which are present in memset(), which both
aes_cipher() and aes_decipher() use to initialize some temporary
buffers. In this case, since the size is known at compile time, these
additional checks should not result in any code generation changes but
allmodconfig has several sanitizers enabled, which may make it harder
for the compiler to eliminate the compile time checks and the variables
that come about from them.
The memset() calls are just initializing these buffers to zero, so use
'= {}' instead, which is used all over the kernel and does the exact
same thing as memset() without the fortify checks, which drops the stack
usage of these functions by a few hundred kilobytes.
If we fail to commit an entity, we need to restore the
UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the
control cache and the device would be out of sync.
Cc: stable@kernel.org Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events") Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/linux-media/fe845e04-9fde-46ee-9763-a6f00867929a@redhat.com/ Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-3-de993ed9823b@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel occasionally crashes in cpumask_clear_cpu(), which is called
within exit_round_robin(), because when executing clear_bit(nr, addr) with
nr set to 0xffffffff, the address calculation may cause misalignment within
the memory, leading to access to an invalid memory address.
To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling
cpumask_clear_cpu() in exit_round_robin(), just as it is done in
round_robin_cpu().
Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Link: https://patch.msgid.link/20240825141352.25280-1-snishika@redhat.com
[ rjw: Subject edit, avoid updates to the same value ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deadlock can occur due to a recursive lock acquisition of
`cros_typec_altmode_data::mutex`.
The call chain is as follows:
1. cros_typec_altmode_work() acquires the mutex
2. typec_altmode_vdm() -> dp_altmode_vdm() ->
3. typec_altmode_exit() -> cros_typec_altmode_exit()
4. cros_typec_altmode_exit() attempts to acquire the mutex again
To prevent this, defer the `typec_altmode_exit()` call by scheduling
it rather than calling it directly from within the mutex-protected
context.
Flush dbc requests when dbc is stopped and transfer rings are freed.
Failure to flush them lead to leaking memory and dbc completing odd
requests after resuming from suspend, leading to error messages such as:
[ 95.344392] xhci_hcd 0000:00:0d.0: no matched request
When /dev/ttyDBC0 device is created then by default ECHO flag
is set for the terminal device. However if data arrives from
a peer before application using /dev/ttyDBC0 applies its set
of terminal flags then the arriving data will be echoed which
might not be desired behavior.
Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so
that we adhere to the reverse Christmas tree rule.
Also, in the next patch we are adding more variables and I didn't know
where to place them with the current ordering.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2def09ead4ad ("dpaa2-eth: fix xdp_rxq_info leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
DPAA2 MAC supports 1588 one step timestamping.
If this option is enabled then for each transmitted PTP event packet,
the 1588 SINGLE_STEP register is accessed to modify the following fields:
-offset of the correction field inside the PTP packet
-UDP checksum update bit, in case the PTP event packet has
UDP encapsulation
These values can change any time, because there may be multiple
PTP clients connected, that receive various 1588 frame types:
- L2 only frame
- UDP / Ipv4
- UDP / Ipv6
- other
The current implementation uses dpni_set_single_step_cfg to update the
SINLGE_STEP register.
Using an MC command on the Tx datapath for each transmitted 1588 message
introduces high delays, leading to low throughput and consequently to a
small number of supported PTP clients. Besides these, the nanosecond
correction field from the PTP packet will contain the high delay from the
driver which together with the originTimestamp will render timestamp
values that are unacceptable in a GM clock implementation.
This patch updates the Tx datapath for 1588 messages when single step
timestamp is enabled and provides direct access to SINGLE_STEP register,
eliminating the overhead caused by the dpni_set_single_step_cfg
MC command. MC version >= 10.32 implements this functionality.
If the MC version does not have support for returning the
single step register base address, the driver will use
dpni_set_single_step_cfg command for updates operations.
All the delay introduced by dpni_set_single_step_cfg
function will be eliminated (if MC version has support for returning the
base address of the single step register), improving the egress driver
performance for PTP packets when single step timestamping is enabled.
Before these changes the maximum throughput for 1588 messages with
single step hardware timestamp enabled was around 2000pps.
After the updates the throughput increased up to 32.82 Mbps / 46631.02 pps.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2def09ead4ad ("dpaa2-eth: fix xdp_rxq_info leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
dpni_get_single_step_cfg is an MC firmware command used for
retrieving the contents of SINGLE_STEP 1588 register available
in a DPMAC.
This patch adds a new version of this command that returns as an extra
argument the physical base address of the aforementioned register.
The address will be used to directly modify the contents of the
SINGLE_STEP register instead of invoking the MC command
dpni_set_single_step_cgf. The former approach introduced huge delays on
the TX datapath when one step PTP events were transmitted. This led to low
throughput and high latencies observed in the PTP correction field.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2def09ead4ad ("dpaa2-eth: fix xdp_rxq_info leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
Rename the dpaa2_eth_xdp_release_buf function into dpaa2_eth_recycle_buf
since in the next patches we'll be using the same recycle mechanism for
the normal stack path beside for XDP_DROP.
Also, rename the array which holds the buffers to be recycled so that it
does not have any reference to XDP.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2def09ead4ad ("dpaa2-eth: fix xdp_rxq_info leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
We are setting the parent directory's last_unlink_trans directly which
may result in a concurrent task starting to log the directory not see the
update and therefore can log the directory after we removed a child
directory which had a snapshot within instead of falling back to a
transaction commit. Replaying such a log tree would result in a mount
failure since we can't currently delete snapshots (and subvolumes) during
log replay. This is the type of failure described in commit 1ec9a1ae1e30
("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync").
Fix this by using btrfs_record_snapshot_destroy() which updates the
last_unlink_trans field while holding the inode's log_mutex lock.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case the removed directory had a snapshot that was deleted, we are
propagating its inode's last_unlink_trans to the parent directory after
we removed the entry from the parent directory. This leaves a small race
window where someone can log the parent directory after we removed the
entry and before we updated last_unlink_trans, and as a result if we ever
try to replay such a log tree, we will fail since we will attempt to
remove a snapshot during log replay, which is currently not possible and
results in the log replay (and mount) to fail. This is the type of failure
described in commit 1ec9a1ae1e30 ("Btrfs: fix unreplayable log after
snapshot delete + parent dir fsync").
So fix this by propagating the last_unlink_trans to the parent directory
before we remove the entry from it.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Always enable vport loopback for both MPV devices on driver start.
Previously in some cases related to MPV RoCE, packets weren't correctly
executing loopback check at vport in FW, since it was disabled.
Due to complexity of identifying such cases for MPV always enable vport
loopback for both GVMIs when binding the slave to the master port.
Fixes: 0042f9e458a5 ("RDMA/mlx5: Enable vport loopback when user context or QP mandate") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, an interrupt can be triggered during a GPU reset, which can
lead to GPU hangs and NULL pointer dereference in an interrupt context
as shown in the following trace:
Before resetting the GPU, it's necessary to disable all interrupts and
deal with any interrupt handler still in-flight. Otherwise, the GPU might
reset with jobs still running, or yet, an interrupt could be handled
during the reset.
Cc: stable@vger.kernel.org Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Juan A. Suarez <jasuarez@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://lore.kernel.org/r/20250628224243.47599-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
We already have 'mrq->data' before calling these two functions, no
need to find it again via 'mrq->data' internally. Also remove local
data variable accordingly.
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0 Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.
To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1] Reported-by: Peter Williams <peter@newton.cx> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0 Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item()
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20250612101556.24829-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since termio interface is now obsolete, include/uapi/asm/ioctls.h
has some constant macros referring to "struct termio", this caused
build failure at userspace.
In file included from /usr/include/asm/ioctl.h:12,
from /usr/include/asm/ioctls.h:5,
from tst-ioctls.c:3:
tst-ioctls.c: In function 'get_TCGETA':
tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio'
12 | return TCGETA;
| ^~~~~~
Even though termios.h provides "struct termio", trying to juggle definitions around to
make it compile could introduce regressions. So better to open code it.
Reported-by: Tulio Magno <tuliom@ascii.art.br> Suggested-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Closes: https://lore.kernel.org/linuxppc-dev/8734dji5wl.fsf@ascii.art.br/ Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250517142237.156665-1-maddy@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it
doesn't indicate building on real X86 machines. There's
no MSR on UML though, so add a check for CONFIG_X86.
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()") Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 34a500caf48c ("rose: fix dangling neighbour pointers in rose_rt_device_down()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: John Daley <johndale@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/ Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061 Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion") Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a6a ("drm/exynos: convert clock_enable crtc callback to pipeline clock") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77ac4 ("pNFS: Avoid a live lock condition in pnfs_update_layout()") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer. This
fixes the crash below:
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/ Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors") Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com> Cc: Vishnu Dasa <vishnu.dasa@broadcom.com> Cc: Broadcom internal kernel review list Cc: Stefano Garzarella <sgarzare@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cmos_interrupt() can be called in a non-interrupt context, such as in
an ACPI event handler (which runs in an interrupt thread). Therefore,
usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() /
spin_unlock_irqrestore() instead.
Before a misguided
commit 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
the cmos_interrupt() function used spin_lock_irqsave(). That commit
changed it to spin_lock() and broke locking, which was partially fixed in
commit 13be2efc390a ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()")
That second commit did not take account of the ACPI fixed event handler
pathway, however. It introduced local_irq_disable() workarounds in
cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels
and are now unnecessary.
Add an explicit comment so that this change will not be reverted by
mistake.
Cc: stable@vger.kernel.org Fixes: 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/all/aDtJ92foPUYmGheF@debian.local/ Link: https://lore.kernel.org/r/20250607210608.14835-1-mat.jonczyk@o2.pl Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()") Cc: stable@vger.kernel.org Reported-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Currently when the pci-hyperv driver finishes probing and initializing the
PCI device, it sets the PCI_COMMAND_MEMORY bit; later when the PCI device
is registered to the core PCI subsystem, the core PCI driver's BAR detection
and initialization code toggles the bit multiple times, and each toggling of
the bit causes the hypervisor to unmap/map the virtual BARs from/to the
physical BARs, which can be slow if the BAR sizes are huge, e.g., a Linux VM
with 14 GPU devices has to spend more than 3 minutes on BAR detection and
initialization, causing a long boot time.
Reduce the boot time by not setting the PCI_COMMAND_MEMORY bit when we
register the PCI device (there is no need to have it set in the first place).
The bit stays off till the PCI device driver calls pci_enable_device().
With this change, the boot time of such a 14-GPU VM is reduced by almost
3 minutes.
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae450 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Cc: stable@vger.kernel.org Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com> Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support") Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Blamed commit missed that vcc_destroy_socket() calls
clip_push() with a NULL skb.
If clip_devs is NULL, clip_push() then crashes when reading
skb->truesize.
Fixes: 93a2014afbac ("atm: fix a UAF in lec_arp_clear_vccs()") Reported-by: syzbot+1316233c4c6803382a8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68556f59.a00a0220.137b3.004e.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v2.6.22+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 3ef5d16f50f8 ("PCI: cadence: Add MSI-X support to Endpoint driver") Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
