Al Viro [Wed, 15 Jan 2025 02:50:02 +0000 (02:50 +0000)]
ntsync: fix a file reference leak in drivers/misc/ntsync.c
struct ntsync_obj contains a reference to struct file
and that reference contributes to refcount - ntsync_alloc_obj()
grabs it. Normally the object is destroyed (and reference
to obj->file dropped) in ntsync_obj_release(). However, in
case of ntsync_obj_get_fd() failure the object is destroyed
directly by its creator.
That case should also drop obj->file; plain kfree(obj)
is not enough there - it ends up leaking struct file * reference.
Take that logics into a helper (ntsync_free_obj()) and
use it in both codepaths that destroy ntsync_obj instances.
Fixes: b46271ec40a05 "ntsync: Introduce NTSYNC_IOC_CREATE_SEM" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20250115025002.GA1977892@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Costa Shulyupin [Mon, 13 Jan 2025 08:55:47 +0000 (10:55 +0200)]
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
For all bitmap declarations like
DECLARE_BITMAP(x, y);
ctags generates multiple DECLARE_BITMAP tags for each usage
because it doesn't expand the DECLARE_BITMAP macro.
Configure ctags to skip generating tags for DECLARE_BITMAP in such cases.
The #define DECLARE_BITMAP itself and declared bitmaps are
tagged correctly.
Merge tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Pull interconnect changes from Georgi:
interconnect changes for 6.14
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
interconnect: qcom: Add interconnect provider driver for SM8750
dt-bindings: interconnect: add interconnect bindings for SM8750
Merge tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Merge from Jonathan:
IIO: 2nd set of fixes for the 6.13 cycle.
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
* tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
iio: light: as73211: fix channel handling in only-color triggered buffer
dt-bindings: iio: dac: ad5791: ldac gpio is active low
iio: hid-sensor-prox: Fix invalid read_raw for attention
iio: adc: ad7606: Fix hardcoded offset in the ADC channels
Document QCS615 BWMONs, which includes one BWMONv4 instance for CPU to
LLCC path bandwidth monitoring and one BWMONv5 instance for LLCC to DDR
path bandwidth monitoring.
Randy Dunlap [Sat, 11 Jan 2025 06:32:30 +0000 (22:32 -0800)]
memstick: core: fix kernel-doc notation
Use the correct kernel-doc format for function parameters (':'
instead of '-') to eliminate kernel-doc warnings.
Add some "Returns:" notations to functions.
memstick.c:206: warning: Function parameter or struct member 'host' not described in 'memstick_detect_change'
memstick.c:222: warning: Function parameter or struct member 'host' not described in 'memstick_next_req'
memstick.c:222: warning: Function parameter or struct member 'mrq' not described in 'memstick_next_req'
memstick.c:248: warning: Function parameter or struct member 'host' not described in 'memstick_new_req'
memstick.c:265: warning: Function parameter or struct member 'mrq' not described in 'memstick_init_req_sg'
memstick.c:265: warning: Function parameter or struct member 'tpc' not described in 'memstick_init_req_sg'
memstick.c:265: warning: Function parameter or struct member 'sg' not described in 'memstick_init_req_sg'
memstick.c:295: warning: Function parameter or struct member 'mrq' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'tpc' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'buf' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'length' not described in 'memstick_init_req'
memstick.c:366: warning: Function parameter or struct member 'card' not described in 'memstick_set_rw_addr'
memstick.c:513: warning: Function parameter or struct member 'host' not described in 'memstick_add_host'
memstick.c:549: warning: Function parameter or struct member 'host' not described in 'memstick_remove_host'
memstick.c:571: warning: Function parameter or struct member 'host' not described in 'memstick_free_host'
memstick.c:582: warning: Function parameter or struct member 'host' not described in 'memstick_suspend_host'
memstick.c:594: warning: Function parameter or struct member 'host' not described in 'memstick_resume_host'
Randy Dunlap [Sat, 11 Jan 2025 06:28:51 +0000 (22:28 -0800)]
intel_th: core: fix kernel-doc warnings
Correct the function parameters based on a previous code patch to
eliminate kernel-doc warnings.
drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'drvdata' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'ndevres' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Excess function parameter 'irq' description in 'intel_th_alloc'
Fixes: 62a593022c32 ("intel_th: Communicate IRQ via resource") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20250111062851.910530-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Llamas [Fri, 10 Jan 2025 17:50:50 +0000 (17:50 +0000)]
binder: log transaction code on failure
When a transaction fails, log the 'tr->code' to help indentify the
problematic userspace call path. This additional information will
simplify debugging efforts.
Cc: Steven Moreland <smoreland@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250110175051.2656975-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 12 Jan 2025 22:34:00 +0000 (14:34 -0800)]
Merge tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
Linus Torvalds [Sun, 12 Jan 2025 22:26:31 +0000 (14:26 -0800)]
Merge tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are some small driver core and debugfs fixes that resolve some
reported problems:
- debugfs runtime error reporting fixes
- topology cpumask race-condition fix
- MAINTAINERS file email update
All of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
fs: debugfs: fix open proxy for unsafe files
MAINTAINERS: align Danilo's maintainer entries
topology: Keep the cpumask unchanged when printing cpumap
debugfs: fix missing mutex_destroy() in short_fops case
fs: debugfs: differentiate short fops with proxy ops
Linus Torvalds [Sun, 12 Jan 2025 22:22:13 +0000 (14:22 -0800)]
Merge tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes that resolve some reported
issues and have been in my tree for too long due to the holiday break.
They resolve the following issues:
- lots of gpib build-time fixes as reported by testers and 0-day
- gpib logical fixes
- mailmap fix
All of these have been in linux-next for a while, with no reported
issues other than the duplicated change"
* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: mite: remove unused global functions
staging: gpib: refer to correct config symbol in tnt4882 Makefile
mailmap: update Bingwu Zhang's email address
staging: gpib: fix address space mixup
staging: gpib: use ioport_map
staging: gpib: fix pcmcia dependencies
staging: gpib: add module author and description fields
staging: gpib: fix Makefiles
staging: gpib: make global 'usec_diff' functions static
staging: gpib: Modify mismatched function name
staging: gpib: Add lower bound check for secondary address
staging: gpib: Fix erroneous removal of blank before newline
Linus Torvalds [Sun, 12 Jan 2025 21:27:15 +0000 (13:27 -0800)]
Merge tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes tree. They resolve some
reported issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix
All have been in my tree and linux-next for three weeks now, with no
reported issues"
* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: use port lock wrappers for break control
serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
tty: serial: 8250: Fix another runtime PM usage counter underflow
Linus Torvalds [Sun, 12 Jan 2025 21:09:00 +0000 (13:09 -0800)]
Merge tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
usb-storage: Add max sectors quirk for Nokia 208
usb: gadget: midi2: Reverse-select at the right place
usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
USB: core: Disable LPM only for non-suspended ports
usb: fix reference leak in usb_new_device()
usb: typec: tcpci: fix NULL pointer issue on shared irq case
usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
usb: typec: ucsi: Set orientation as none when connector is unplugged
usb: gadget: configfs: Ignore trailing LF for user strings to cdev
USB: usblp: return error when setting unsupported protocol
usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
usb: dwc3-am62: Disable autosuspend during remove
usb: dwc3: gadget: fix writing NYET threshold
Linus Torvalds [Sun, 12 Jan 2025 20:04:53 +0000 (12:04 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Linus Torvalds [Sun, 12 Jan 2025 19:55:48 +0000 (11:55 -0800)]
Merge tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Check whether shadow stack is active before using the ptrace regset
getter
- Remove a wrong BUG_ON in the early static call code which breaks Xen
PVH when booting as dom0
* tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Ensure shadow stack is active before "getting" registers
x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
Clear reset status flag, to keep error status register
clean after reset (ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the
"Error Status Register" was dirty (0x01). It is important
to clear this bit, so if there is any reset event over normal
working mode, it is possible to detect it.
Fix ad3541/2r voltage ranges to be as per ad3542r datasheet,
rev. C, table 38 (page 57).
The wrong ad354xr ranges was generating erroneous Vpp output.
In more details:
- fix wrong number of ranges, they are 5 ranges, not 6,
- remove non-existent 0-3V range,
- adjust order, since ad3552r_find_range() get a wrong index,
producing a wrong Vpp as output.
Retested all the ranges on real hardware, EVALAD3542RFMCZ:
adi,output-range-microvolt (fdt):
<(000000) (2500000)>; ok (Rfbx1, switch 10)
<(000000) (5000000)>; ok (Rfbx1, switch 10)
<(000000) (10000000)>; ok (Rfbx1, switch 10)
<(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5)
<(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5)
Dan Carpenter [Wed, 8 Jan 2025 09:37:22 +0000 (12:37 +0300)]
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
The bme680_read_temp() function takes a pointer to s16 but we're passing
an int pointer to it. This will not work on big endian systems and it
also means that the other 16 bits are uninitialized.
Pass an s16 type variable.
Fixes: f51171ce2236 ("iio: chemical: bme680: Add SCALE and RAW channels") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/4addb68c-853a-49fc-8d40-739e78db5fa1@stanley.mountain Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Pull IIO updaate from Jonathan:
IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.
There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:
adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
but with lower sampling rates and no configuration registers.
Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
compatible with fxls8962af but with different device IDs which are used in
presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
the counter functionality in this driver as that is handled by the
counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.
Driver drop
===========
rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
Matti had done all the work to get a driver upstream.
Features
========
adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
more platforms that don't obey prior (non general) assumptions on
how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
higher speeds.
- Add regmap cache to reduce access to device.
Cleanup and minor fixes
=======================
cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
Includes a few cleanups where this unsigned and it should have been
signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
and iio_read_channel_label() are page sized and page aligned.
Done this way because the callbacks are almost always only used
to fill sysfs attributes. The check covers the tiny percentage
of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
clearing the whole thing before writing rather than trying to
clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
account changes in gain and integration time.
Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.
* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
iio: adc: ad7625: Add ending newlines to error messages
iio: accel: adxl345: complete the list of defines
iio: accel: adxl345: add FIFO with watermark events
iio: accel: adxl345: initialize FIFO delay value for SPI
iio: accel: adxl345: introduce interrupt handling
iio: light: veml3235: fix scale to conform to ABI
iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
iio: light: veml3235: extend regmap to add cache
iio: light: veml3235: fix code style
dt-bindings: iio: accel: adxl345: add interrupt-names
dt-bindings: iio: accel: adxl345: make interrupts not a required property
dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
iio: adc: meson: fix voltage reference selection field name typo
iio: adc: rockchip: correct alignment of timestamp
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
...
Merge tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Pull extcon updates from Chanwoo:
Update extcon next for v6.14
Detailed description for this pull request:
- Fix null pointer check of memory allocation on extcon-rtk-type-c.c.
- Add EXTCON subsystem documentation including the detailed description/example.
- Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c.
* tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Documentation: extcon: add documentation for Extcon subsystem
extcon: realtek: fix NULL deref check in extcon_rtk_type_c_probe
Merge tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Pull coresight updates from Suzuki:
coresight: Updates for Linux v6.14
Coresight self-hosted tracing subsystem updates for v6.14 includes:
- Support for static traceid allocation for devices
- Support for impdef, static trace filtering in Qualcomm replicators
- Miscellaneous fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight-tpda: Optimize the function of reading element size
coresight: Add support for trace filtering by source
coresight: Add a helper to check if a device is source
dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
coresight: Fix dsb_mode_store() unsigned val is never less than zero
coresight: dummy: Add static trace id support for dummy source
coresight: Add support to get static id for system trace sources
dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
coresight: Drop atomics in connection refcounts
Coresight: Narrow down the matching range of tpdm
Paolo Bonzini [Sun, 12 Jan 2025 11:48:14 +0000 (12:48 +0100)]
Merge branch 'kvm-e500-check-writable-pfn' into HEAD
The new __kvm_faultin_pfn() function is upset by the fact that e500
KVM ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is passing NULL.
While a simple fix would be possible that simply allows writable to
be NULL, it is quite ugly to have e500 KVM ignore completely the host
permissions and map readonly host pages as guest-writable. Merge a more
complete fix and remove the VMA-based attempts at building huge shadow TLB
entries. Using a PTE lookup, similar to what is done for x86, is better
and works with remap_pfn_range() because it does not assume that VM_PFNMAP
areas are contiguous. Note that the same incorrect logic is there in
ARM's get_vma_page_shift() and RISC-V's kvm_riscv_gstage_ioremap().
Fortunately, for e500 most of the code is already there; it just has to
be changed to compute the range from find_linux_pte()'s output rather
than find_vma(). The new code works for both VM_PFNMAP and hugetlb
mappings, so the latter is removed.
Patches 2-5 were tested by the reporter, Christian Zigotzky. Since
the difference with v1 is minimal, I am going to send it to Linus
today.
Paolo Bonzini [Wed, 8 Jan 2025 15:49:50 +0000 (16:49 +0100)]
KVM: e500: perform hugepage check after looking up the PFN
e500 KVM tries to bypass __kvm_faultin_pfn() in order to map VM_PFNMAP
VMAs as huge pages. This is a Bad Idea because VM_PFNMAP VMAs could
become noncontiguous as a result of callsto remap_pfn_range().
Instead, use the already existing host PTE lookup to retrieve a
valid host-side mapping level after __kvm_faultin_pfn() has
returned. Then find the largest size that will satisfy the
guest's request while staying within a single host PTE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Jan 2025 15:14:55 +0000 (16:14 +0100)]
KVM: e500: map readonly host pages for read
The new __kvm_faultin_pfn() function is upset by the fact that e500 KVM
ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is nonchalantly passing NULL.
If the host page permissions do not include writability, the shadow
TLB entry is forcibly mapped read-only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Jan 2025 15:21:38 +0000 (16:21 +0100)]
KVM: e500: track host-writability of pages
Add the possibility of marking a page so that the UW and SW bits are
force-cleared. This is stored in the private info so that it persists
across multiple calls to kvmppc_e500_setup_stlbe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Jan 2025 15:19:28 +0000 (16:19 +0100)]
KVM: e500: use shadow TLB entry as witness for writability
kvmppc_e500_ref_setup is returning whether the guest TLB entry is writable,
which is than passed to kvm_release_faultin_page. This makes little sense
for two reasons: first, because the function sets up the private data for
the page and the return value feels like it has been bolted on the side;
second, because what really matters is whether the _shadow_ TLB entry is
writable. If it is not writable, the page can be released as non-dirty.
Shift from using tlbe_is_writable(gtlbe) to doing the same check on
the shadow TLB entry.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 12 Jan 2025 09:34:44 +0000 (10:34 +0100)]
KVM: e500: always restore irqs
If find_linux_pte fails, IRQs will not be restored. This is unlikely
to happen in practice since it would have been reported as hanging
hosts, but it should of course be fixed anyway.
Cc: stable@vger.kernel.org Reported-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sun, 12 Jan 2025 04:34:12 +0000 (20:34 -0800)]
Merge tag 'probes-fixes-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Fix to free trace_kprobe objects at a failure path in
__trace_kprobe_create() function. This fixes a memory leak"
* tag 'probes-fixes-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix to free objects when failed to copy a symbol
Linus Torvalds [Sat, 11 Jan 2025 19:42:48 +0000 (11:42 -0800)]
Merge tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to fix error handling in drivetemp driver"
* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
Linus Torvalds [Sat, 11 Jan 2025 18:59:43 +0000 (10:59 -0800)]
Merge tag 'io_uring-6.13-20250111' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for multishot timeout updates only using the updated value for
the first invocation, not subsequent ones
- Silence a false positive lockdep warning
- Fix the eventfd signaling and putting RCU logic
- Fix fault injected SQPOLL setup not clearing the task pointer in the
error path
- Fix local task_work looking at the SQPOLL thread rather than just
signaling the safe variant. Again one of those theoretical issues,
which should be closed up none the less.
* tag 'io_uring-6.13-20250111' of git://git.kernel.dk/linux:
io_uring: don't touch sqd->thread off tw add
io_uring/sqpoll: zero sqd->thread on tctx errors
io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period
io_uring: silence false positive warnings
io_uring/timeout: fix multishot updates
Linus Torvalds [Sat, 11 Jan 2025 18:49:50 +0000 (10:49 -0800)]
Merge tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
- fix unneeded session setup retry due to stale password e.g. for DFS
automounts
* tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: sync the root session and superblock context passwords before automounting
Linus Torvalds [Sat, 11 Jan 2025 18:42:05 +0000 (10:42 -0800)]
Merge tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Over the Christmas break a couple of devicetree fixes came in for
Rockchips, Qualcomm and NXP/i.MX. These add some missing board
specific properties, address build time warnings,
The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes
get reverted for now.
Aside from the devicetree fixes, there is One build fix for the stm32
firewall driver, and a defconfig change to enable SPDIF support for
i.MX"
* tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firewall: remove misplaced semicolon from stm32_firewall_get_firewall
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: qcom: sa8775p: fix the secure device bootup issue
Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers"
Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"
arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a
Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"
ARM: dts: imxrt1050: Fix clocks for mmc
ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF
arm64: dts: imx95: correct the address length of netcmix_blk_ctrl
arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
smb: client: sync the root session and superblock context passwords before automounting
In some cases, when password2 becomes the working password, the
client swaps the two password fields in the root session struct, but
not in the smb3_fs_context struct in cifs_sb. DFS automounts inherit
fs context from their parent mounts. Therefore, they might end up
getting the passwords in the stale order.
The automount should succeed, because the mount function will end up
retrying with the actual password anyway. But to reduce these
unnecessary session setup retries for automounts, we can sync the
parent context's passwords with the root session's passwords before
duplicating it to the child's fs context.
Cc: stable@vger.kernel.org Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Fri, 10 Jan 2025 23:11:58 +0000 (15:11 -0800)]
Merge tag 'sched_ext-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix corner case bug where ops.dispatch() couldn't extend the
execution of the current task if SCX_OPS_ENQ_LAST is set.
- Fix ops.cpu_release() not being called when a SCX task is preempted
by a higher priority sched class task.
- Fix buitin idle mask being incorrectly left as busy after an idle CPU
is picked and kicked.
- scx_ops_bypass() was unnecessarily using rq_lock() which comes with
rq pinning related sanity checks which could trigger spuriously.
Switch to raw_spin_rq_lock().
* tag 'sched_ext-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Refresh idle masks during idle-to-idle transitions
sched_ext: switch class when preempted by higher priority scheduler
sched_ext: Replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass()
sched_ext: keep running prev when prev->scx.slice != 0
Linus Torvalds [Fri, 10 Jan 2025 23:03:02 +0000 (15:03 -0800)]
Merge tag 'cgroup-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Cpuset fixes:
- Fix isolated CPUs leaking into sched domains
- Remove now unnecessary kernfs active break which can trigger a
warning
- Comment updates"
* tag 'cgroup-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: remove kernfs active break
cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains
cgroup/cpuset: Remove stale text
Linus Torvalds [Fri, 10 Jan 2025 22:41:46 +0000 (14:41 -0800)]
Merge tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add two more ACPI IRQ override quirks and update the code using them
to avoid unnecessary overhead (Hans de Goede)"
* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: acpi_dev_irq_override(): Check DMI match last
ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
Andrea Righi [Fri, 10 Jan 2025 22:16:31 +0000 (23:16 +0100)]
sched_ext: idle: Refresh idle masks during idle-to-idle transitions
With the consolidation of put_prev_task/set_next_task(), see
commit 436f3eed5c69 ("sched: Combine the last put_prev_task() and the
first set_next_task()"), we are now skipping the transition between
these two functions when the previous and the next tasks are the same.
As a result, the scx idle state of a CPU is updated only when
transitioning to or from the idle thread. While this is generally
correct, it can lead to uneven and inefficient core utilization in
certain scenarios [1].
A typical scenario involves proactive wake-ups: scx_bpf_pick_idle_cpu()
selects and marks an idle CPU as busy, followed by a wake-up via
scx_bpf_kick_cpu(), without dispatching any tasks. In this case, the CPU
continues running the idle thread, returns to idle, but remains marked
as busy, preventing it from being selected again as an idle CPU (until a
task eventually runs on it and releases the CPU).
For example, running a workload that uses 20% of each CPU, combined with
an scx scheduler using proactive wake-ups, results in the following core
utilization:
CPU 0: 25.7%
CPU 1: 29.3%
CPU 2: 26.5%
CPU 3: 25.5%
CPU 4: 0.0%
CPU 5: 25.5%
CPU 6: 0.0%
CPU 7: 10.5%
To address this, refresh the idle state also in pick_task_idle(), during
idle-to-idle transitions, but only trigger ops.update_idle() on actual
state changes to prevent unnecessary updates to the scx scheduler and
maintain balanced state transitions.
With this change in place, the core utilization in the previous example
becomes the following:
CPU 0: 18.8%
CPU 1: 19.4%
CPU 2: 18.0%
CPU 3: 18.7%
CPU 4: 19.3%
CPU 5: 18.9%
CPU 6: 18.7%
CPU 7: 19.3%
[1] https://github.com/sched-ext/scx/pull/1139
Fixes: 7c65ae81ea86 ("sched_ext: Don't call put_prev_task_scx() before picking the next task") Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Pavel Begunkov [Fri, 10 Jan 2025 20:36:45 +0000 (20:36 +0000)]
io_uring: don't touch sqd->thread off tw add
With IORING_SETUP_SQPOLL all requests are created by the SQPOLL task,
which means that req->task should always match sqd->thread. Since
accesses to sqd->thread should be separately protected, use req->task
in io_req_normal_work_add() instead.
Note, in the eyes of io_req_normal_work_add(), the SQPOLL task struct
is always pinned and alive, and sqd->thread can either be the task or
NULL. It's only problematic if the compiler decides to reload the value
after the null check, which is not so likely.
Cc: stable@vger.kernel.org Cc: Bui Quang Minh <minhquangbui99@gmail.com> Reported-by: lizetao <lizetao1@huawei.com> Fixes: 78f9b61bd8e54 ("io_uring: wake SQPOLL task when task_work is added to an empty queue") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1cbbe72cf32c45a8fee96026463024cd8564a7d7.1736541357.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 10 Jan 2025 14:31:23 +0000 (14:31 +0000)]
io_uring/sqpoll: zero sqd->thread on tctx errors
Syzkeller reports:
BUG: KASAN: slab-use-after-free in thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
Read of size 8 at addr ffff88803578c510 by task syz.2.3223/27552
Call Trace:
<TASK>
...
kasan_report+0x143/0x180 mm/kasan/report.c:602
thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
thread_group_cputime_adjusted+0xa6/0x340 kernel/sched/cputime.c:639
getrusage+0x1000/0x1340 kernel/sys.c:1863
io_uring_show_fdinfo+0xdfe/0x1770 io_uring/fdinfo.c:197
seq_show+0x608/0x770 fs/proc/fd.c:68
...
That's due to sqd->task not being cleared properly in cases where
SQPOLL task tctx setup fails, which can essentially only happen with
fault injection to insert allocation errors.
Linus Torvalds [Fri, 10 Jan 2025 20:35:46 +0000 (12:35 -0800)]
Merge tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
- avoid initializing out of bounds pages on sparse vmemmap systems with
a gap at the start of their physical memory map
- fix backtracing through exceptions
- _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y
- local labels in entry.S are now marked with ".L", which prevents them
from trashing backtraces
- a handful of fixes for SBI-based performance counters
* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
riscv: use local label names instead of global ones in assembly
riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
riscv: stacktrace: fix backtracing through exceptions
riscv: mm: Fix the out of bound issue of vmemmap address
cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
riscv: kprobes: Fix incorrect address calculation
riscv: Fix sleeping in invalid context in die()
riscv: module: remove relocation_head rel_entry member allocation
riscv: selftests: Fix warnings pointer masking test
Imran Khan [Thu, 9 Jan 2025 23:27:11 +0000 (10:27 +1100)]
workqueue: warn if delayed_work is queued to an offlined cpu.
delayed_work submitted to an offlined cpu, will not get executed,
after the specified delay if the cpu remains offline. If the cpu
never comes online the work will never get executed.
checking for online cpu in __queue_delayed_work, does not sound
like a good idea because to do this reliably we need hotplug lock
and since work may be submitted from atomic contexts, we would
have to use cpus_read_trylock. But if trylock fails we would queue
the work on any cpu and this may not be optimal because our intended
cpu might still be online.
Putting a WARN_ON_ONCE for an already offlined cpu, will indicate users
of queue_delayed_work_on, if they are (wrongly) trying to queue
delayed_work on offlined cpu. Also indicate the problem of using
offlined cpu with queue_delayed_work_on, in its description.
Arnd Bergmann [Fri, 10 Jan 2025 17:20:46 +0000 (18:20 +0100)]
Merge tag 'v6.13-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixed card-detect on one board and some missing properties added.
* tag 'v6.13-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
Linus Torvalds [Fri, 10 Jan 2025 17:11:11 +0000 (09:11 -0800)]
Merge tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Linus Torvalds [Fri, 10 Jan 2025 17:04:27 +0000 (09:04 -0800)]
Merge tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Fix a missing lock while detaching a dquot buffer
- Fix failure on xfs_update_last_rtgroup_size for !XFS_RT
* tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: lock dquot buffer before detaching dquot from b_li_list
xfs: don't return an error from xfs_update_last_rtgroup_size for !XFS_RT
Linus Torvalds [Fri, 10 Jan 2025 16:14:22 +0000 (08:14 -0800)]
Merge tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
Linus Torvalds [Fri, 10 Jan 2025 16:05:32 +0000 (08:05 -0800)]
Merge tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for !REGULATOR and !OF configurations, adding
missing stubs"
* tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR
regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
Linus Torvalds [Fri, 10 Jan 2025 15:59:47 +0000 (07:59 -0800)]
Merge tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There's one small fix for real HW - gpio-loongson.
The rest concern two virtual testing drivers in which some issues were
recently found and addressed:
- fix resource leaks in error path in gpio-virtuser (and one
consistent memory leak triggered on every device removal))
- fix the use-case of having multiple con_ids in a lookup table in
gpio-virtuser which has never worked (despite being advertised)
- don't allow rmdir() on configfs directories when they are in use in
gpio-sim and gpio-virtuser
- fix register offsets in gpio-loongson-64"
* tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset
gpio: sim: lock up configfs that an instantiated device depends on
gpio: virtuser: lock up configfs that an instantiated device depends on
gpio: virtuser: fix handling of multiple conn_ids in lookup table
gpio: virtuser: fix missing lookup table cleanups
Ekansh Gupta [Fri, 10 Jan 2025 13:42:39 +0000 (13:42 +0000)]
misc: fastrpc: Fix copy buffer page size
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address.
Ekansh Gupta [Fri, 10 Jan 2025 13:42:38 +0000 (13:42 +0000)]
misc: fastrpc: Fix registered buffer page address
For registered buffers, fastrpc driver sends the buffer information
to remote subsystem. There is a problem with current implementation
where the page address is being sent with an offset leading to
improper buffer address on DSP. This is leads to functional failures
as DSP expects base address in page information and extracts offset
information from remote arguments. Mask the offset and pass the base
page address to DSP.
This issue is observed is a corner case when some buffer which is registered
with fastrpc framework is passed with some offset by user and then the DSP
implementation tried to read the data. As DSP expects base address and takes
care of offsetting with remote arguments, passing an offsetted address will
result in some unexpected data read in DSP.
All generic usecases usually pass the buffer as it is hence is problem is
not usually observed. If someone tries to pass offsetted buffer and then
tries to compare data at HLOS and DSP end, then the ambiguity will be observed.
misc: fastrpc: Deregister device nodes properly in error scenarios
During fastrpc_rpmsg_probe, if secure device node registration
succeeds but non-secure device node registration fails, the secure
device node deregister is not called during error cleanup. Add proper
exit paths to ensure proper cleanup in case of error.
nvmem: core: improve range check for nvmem_cell_write()
When __nvmem_cell_entry_write() is called for an nvmem cell that does
not need bit shifting, it requires that the len parameter exactly
matches the nvmem cell size. However, when the nvmem cell has a nonzero
bit_offset, it was skipping this check.
Accepting values of len larger than the cell size results in
nvmem_cell_prepare_write_buffer() trying to write past the end of a heap
buffer that it allocates. Add a check to avoid that problem and instead
return -EINVAL when len doesn't match the number of bits expected by the
nvmem cell when bit_offset is nonzero.
This check uses cell->nbits in order to allow providing the smaller size
to cells that are shifted into another byte by bit_offset. For example,
a cell with nbits=8 and nonzero bit_offset would have bytes=2 but should
accept a 1-byte write here, although no current callers depend on this.
Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Cc: stable@vger.kernel.org Signed-off-by: Jennifer Berringer <jberring@redhat.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230141901.263976-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Weiss [Mon, 30 Dec 2024 14:19:00 +0000 (14:19 +0000)]
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
Let the nvmem core know what size the SDAM is, most notably this fixes
the size of /sys/bus/nvmem/devices/spmi_sdam*/nvmem being '0' and makes
user space work with that file.
Sascha Hauer [Mon, 30 Dec 2024 14:18:59 +0000 (14:18 +0000)]
nvmem: imx-ocotp-ele: set word length to 1
The ELE hardware internally has a word length of 4. However, among other
things we store MAC addresses in the ELE OCOTP. With a length of 6 bytes
these are naturally unaligned to the word length. Therefore we must
support unaligned reads in reg_read() and indeed it works properly when
reg_read() is called via nvmem_reg_read(). Setting the word size to 4
has the only visible effect that doing unaligned reads from userspace
via bin_attr_nvmem_read() do not work because they are rejected by that
function.
Given that we have to abstract from word accesses to byte accesses in
the driver, set the word size to 1. This allows bytewise accesses from
userspace to be able to test what the driver has to support anyway.
This means the MAC addresses are stored in reverse byte order. We have
to swap the bytes before passing them to the upper layers. The storage
format is consistent to the one used on i.MX6 using imx-ocotp driver
which does the same byte swapping as introduced here.
With this patch the MAC address on my i.MX93 TQ board correctly reads as
00:d0:93:6b:27:b8 instead of b8:27:6b:93:d0:00.
Sascha Hauer [Mon, 30 Dec 2024 14:18:57 +0000 (14:18 +0000)]
nvmem: imx-ocotp-ele: fix reading from non zero offset
In imx_ocotp_reg_read() the offset comes in as bytes and not as words.
This means we have to divide offset by 4 to get to the correct word
offset.
Also the incoming offset might not be word aligned. In order to read
from the OCOTP the driver aligns down the previous word boundary and
reads from there. This means we have to skip this alignment offset from
the temporary buffer when copying the data to the output buffer.
Lukas Bulwahn [Fri, 10 Jan 2025 10:50:00 +0000 (11:50 +0100)]
pps: adjust references to actual name of uapi header file
Commit 86b525bed275 ("drivers pps: add PPS generators support") adds a file
entry in MAINTAINERS and a reference in the ioctl-number documentation
referring to the file pps-gen.h, whereas the file added in this commit is
named pps_gen.h.
Adjust the two references to the actual name of the uapi header file.
While at it, put the entry in MAINTAINERS at the right place for
alphabetical ordering.
Alyssa Ross [Thu, 9 Jan 2025 19:38:07 +0000 (20:38 +0100)]
VMCI: fix reference to ioctl-number.rst
There has never been an ioctl-number.h — this must have been a typo
for ioctl-number.txt (which later become ioctl-number.rst).
At the time this comment was written, the note didn't actually end up
appearing anywhere, but I fixed the omission from ioctl-number.rst in 0a8e4dc1d353 ("Documentation: ioctl: document 0x07 ioctl code").
David Reaver [Thu, 9 Jan 2025 03:59:02 +0000 (19:59 -0800)]
virtio: console: Replace deprecated kmap_atomic with kmap_local_page
kmap_atomic() is deprecated and should be replaced with kmap_local_page()
[1][2]. kmap_local_page() is faster in kernels with HIGHMEM enabled, can
take page faults, and allows preemption.
According to [2], this replacement is safe as long as the code between
kmap_atomic() and kunmap_atomic() does not implicitly depend on disabling
page faults or preemption. In this patch, the only thing happening between
mapping and unmapping the page is a memcpy, and I don't suspect it depends
on disabling page faults or preemption.
pps: clients: gpio: Bypass edge's direction check when not needed
In the IRQ handler, the GPIO's state is read to verify the direction of
the edge that triggered the interruption before generating the PPS event.
If a pulse is too short, the GPIO line can reach back its original state
before this verification and the PPS event is lost.
This check is needed when info->capture_clear is set because it needs
interruptions on both rising and falling edges. When info->capture_clear
is not set, interruption is triggered by one edge only so this check can
be omitted.
Add a warning if irq_handler is left without triggering any PPS event.
Bypass the edge's direction verification when info->capture_clear is not
set.
Sean Rhodes [Tue, 19 Nov 2024 08:58:15 +0000 (08:58 +0000)]
drivers/card_reader/rtsx_usb: Restore interrupt based detection
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
Ekansh Gupta [Fri, 10 Jan 2025 13:43:08 +0000 (13:43 +0000)]
misc: fastrpc: Rename tgid and pid to client_id
The information passed as request tgid and pid is actually the
client id of the process. This client id is used as an
identifier by DSP to identify the DSP PD corresponding to the
process. Currently process tgid is getting passed as the
identifier which is getting replaced by a custom client id.
Rename the data which uses this client id.
Ekansh Gupta [Fri, 10 Jan 2025 13:43:07 +0000 (13:43 +0000)]
misc: fastrpc: Add support for multiple PD from one process
Memory intensive applications(which requires more tha 4GB) that wants
to offload tasks to DSP might have to split the tasks to multiple
user PD to make the resources available.
For every call to DSP, fastrpc driver passes the process tgid which
works as an identifier for the DSP to enqueue the tasks to specific PD.
With current design, if any process opens device node more than once
and makes PD init request, same tgid will be passed to DSP which will
be considered a bad request and this will result in failure as the same
identifier cannot be used for multiple DSP PD.
Assign and pass a client ID to DSP which would be assigned during device
open and will be dependent on the index of session allocated for the PD.
This will allow the same process to open the device more than once and
spawn multiple dynamic PD for ease of processing.
Merge patch series "poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()"
Oleg Nesterov <oleg@redhat.com> says:
The waitqueue_active() helper can only be used if both waker and waiter
have memory barriers that pair with each other. But __pollwait() is
broken in this respect. Fix it.
* patches from https://lore.kernel.org/r/20250107162649.GA18886@redhat.com:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
Oleg Nesterov [Tue, 7 Jan 2025 16:27:36 +0000 (17:27 +0100)]
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
Now that poll_wait() provides a full barrier we can remove smp_mb() from
sock_poll_wait().
Also, the poll_does_not_wait() check before poll_wait() just adds the
unnecessary confusion, kill it. poll_wait() does the same "p && p->_qproc"
check.
Oleg Nesterov [Tue, 7 Jan 2025 16:27:24 +0000 (17:27 +0100)]
poll_wait: kill the obsolete wait_address check
This check is historical and no longer needed, wait_address is never NULL.
These days we rely on the poll_table->_qproc check. NULL if select/poll
is not going to sleep, or it already has a data to report, or all waiters
have already been registered after the 1st iteration.
However, poll_table *p can be NULL, see p9_fd_poll() for example, so we
can't remove the "p != NULL" check.
Oleg Nesterov [Tue, 7 Jan 2025 16:27:17 +0000 (17:27 +0100)]
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Gerhard Engleder [Sat, 14 Dec 2024 21:57:59 +0000 (22:57 +0100)]
misc: keba: Fix kernfs warning on module unload
Unloading the cp500 module leads to the following warning:
kernfs: can not remove 'eeprom', no directory
WARNING: CPU: 1 PID: 1610 at fs/kernfs/dir.c:1683 kernfs_remove_by_name_ns+0xb1/0xc0
The parent I2C device of the nvmem devices is freed before the nvmem
devices. The reference to the nvmem devices is put by devm after
cp500_remove(), but at this time the parent I2C device does not exist
anymore as the I2C controller and its devices have already been freed in
cp500_remove(). Thus, nvmem tries to remove an entry from an already
deleted directory.
Free nvmem devices before I2C controller auxiliary device.
uio: uio_dmem_genirq: check the return value of devm_kasprintf()
devm_kasprintf() can fail so check its return value and bail-out on no
memory.
Fixes: 52e2dc2ce2d8 ("uio: Convert a few more users to using %pOFn instead of device_node.name") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241202181703.28546-1-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Fri, 10 Jan 2025 07:58:14 +0000 (08:58 +0100)]
fs: debugfs: fix open proxy for unsafe files
In the previous commit referenced below, I had to split
the short fops handling into different proxy fops. This
necessitated knowing out-of-band whether or not the ops
are short or full, when attempting to convert from fops
to allocated fsdata.
Unfortunately, I only converted full_proxy_open() which
is used for the new full_proxy_open_regular() and
full_proxy_open_short(), but forgot about the call in
open_proxy_open(), used for debugfs_create_file_unsafe().
Fix that, it never has short fops.
Fixes: f8f25893a477 ("fs: debugfs: differentiate short fops with proxy ops") Reported-by: Suresh Kumar Kurmi <suresh.kumar.kurmi@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202501101055.bb8bf3e7-lkp@intel.com Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20250110085826.cd74f3b7a36b.I430c79c82ec3f954c2ff9665753bf6ac9e63eef8@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Thu, 9 Jan 2025 14:14:40 +0000 (15:14 +0100)]
uprobes: Fix race in uprobe_free_utask
Max Makarov reported kernel panic [1] in perf user callchain code.
The reason for that is the race between uprobe_free_utask and bpf
profiler code doing the perf user stack unwind and is triggered
within uprobe_free_utask function:
- after current->utask is freed and
- before current->utask is set to NULL
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
* tag '6.13-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Implement new SMB3 POSIX type
ksmbd: fix unexpectedly changed path in ksmbd_vfs_kern_path_locked
ksmbd: Remove unneeded if check in ksmbd_rdma_capable_netdev()
ksmbd: fix a missing return value check bug
tracing/kprobes: Fix to free objects when failed to copy a symbol
In __trace_kprobe_create(), if something fails it must goto error block
to free objects. But when strdup() a symbol, it returns without that.
Fix it to goto the error block to free objects correctly.
projects / thirdparty / linux.git / log
