Nick Clifton [Thu, 10 May 2012 13:42:03 +0000 (13:42 +0000)]
PR bootstrap/50461
* configure.ac (mpfr-dir): When using in-tree MPFR sources
allow for the fact that from release v3.1.0 of MPFR the source
files were moved into a src sub-directory.
* configure: Regenerate.
Joel Brobecker [Wed, 9 May 2012 14:29:02 +0000 (14:29 +0000)]
mips: Switch inferior function calls to ON_STACK method.
This patch switches the mips code to use the ON_STACK method
for function calls instead of AT_SYMBOL, which we want to remove.
gdb/ChangeLog:
* mips-tdep.c (mips_push_dummy_code): New function.
(mips_gdbarch_init): Set the gdbarch call_dummy_location to
ON_STACK and install mips_push_dummy_code as our gdbarch
push_dummy_code routine.
Eli Zaretskii [Tue, 8 May 2012 18:49:42 +0000 (18:49 +0000)]
Display the ">" prompt in interactive mode while reading canned
commands, even when the current interpreter is MI.
interps.c (interp_set_temp): New function.
interps.h (interp_set_temp): Add prototype.
cli/cli-script.c (restore_interp): New cleanup function.
(read_command_lines): Temporarily override the current interpreter
with CLI and arrange for restoring the original one.
* sh-linux-tdep.c: Include trad-frame.h and tramp-frame.h.
(sh_linux_sigtramp_cache): New function.
(sh_linux_sigreturn_init): New function.
(sh_linux_rt_sigreturn_init): New function.
(SH_MOVW,SH_TRAP,SH_OR_R0_R0): New symbols for instruction
patterns.
(SH_NR_SIGRETURN,SH_NR_RT_SIGRETURN): New symbols for sigreturn
syscall codes.
(sh_linux_sigreturn_tramp_frame): New tramp_frame definition.
(sh_linux_rt_sigreturn_tramp_frame): Likewise.
(sh_linux_init_abi): Add init calls to register new tramp_frame
definitions under 32-bit SH, update comments.
Jan Kratochvil [Sun, 6 May 2012 15:31:04 +0000 (15:31 +0000)]
gdb/
* auto-load.c (set_auto_load_safe_path): Reset AUTO_LOAD_SAFE_PATH
back to DEFAULT_AUTO_LOAD_SAFE_PATH if it is being set to "".
(show_auto_load_safe_path): Check any-directory by comparison with "/".
(add_auto_load_safe_path): Change the error message.
(_initialize_auto_load): Change the "safe-path" help text.
* configure: Regenerate
* configure.ac (--without-auto-load-safe-path): Set
WITH_AUTO_LOAD_SAFE_PATH to /.
gdb/doc/
* gdb.texinfo (Auto-loading safe path): Make 'directories'
for 'set auto-load safe-path' optional. Mention if it is omitted.
Change disabling security protection condition to "/", twice.
2012-05-06 Arnold Metselaar <arnold_m@operamail.com>
* gas/z80/jr-forwf.s: New file, adapted from z8k version.
* gas/z80/jr-backf.s: Likewise.
* gas/z80/djnz-backf.s: Likewise.
* gas/z80/ill_op: New file, with illegal operand.
* gas/z80/z80.exp: Run new tests.
2012-05-06 Arnold Metselaar <arnold_m@operamail.com>
* config/tc-z80.h(md_register_arithmetic): Define as 0.
* config/tc-z80.c(md_begin): Store register names in symbol table, prevents usage as ordinary symbol.
* config/tc-z80.c(contains_register): New function.
* config/tc-z80.c(parse_exp2): Removed.
* config/tc-z80.c(parse_exp_not_indexed): New function.
* config/tc-z80.c(parse_exp): Add code to recogize indexed addressing after parsing.
* config/tc-z80.c(emit_byte, emit_word): Use contains_register.
* config/tc-z80.c(emit_jp): Use parse_exp_not_indexed, simplify condition for jump to register.
* config/tc-z80.c(emit_call, emit_jr, emit_ex, emit_rst): Use parse_exp_not_indexed.
Alan Modra [Sat, 5 May 2012 03:05:32 +0000 (03:05 +0000)]
Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
and bfd_ind_section with their _ptr variants, or use corresponding
bfd_is_* macros.
Add two new methods global_block and static_block to gdb.Symtab
objects.
* NEWS (Python scripting): Add entry about the new methods.
* python/py-symtab.c (stpy_global_block): New function which
implements the gdb.Symtab.global_block() method.
(stpy_static_block): New function which implements the
gdb.Symtab.static_block() method.
(symtab_object_methods): Add entries for the two new methods.
* testsuite/gdb.python/py-symbol.exp: Add tests to test the new
methods gdb.Symtab.global_block() and gdb.Symtab.static_block().
* tessuite/gdb.python/py-symbol.c: Add new struct to help test
gdb.Symtab.static_block().
* doc/gdb.texinfo (Symbol Tables In Python): Add documentation
about the new methods global_block and static_block on
gdb.Symtab objects.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
* doc/gdb.texinfo (Blocks In Python): Add a note saying that
future improvements to GDB and its infrastructure can move
symbols across blocks within a symbol table.
Cary Coutant [Tue, 1 May 2012 22:43:54 +0000 (22:43 +0000)]
[Checking in missing files from previous commit.]
* testsuite/gdb_index_test_3.c: New test source file.
* testsuite/gdb_index_test_3.sh: New test source file.
Mark Wielaard [Tue, 1 May 2012 19:12:21 +0000 (19:12 +0000)]
gold: Handle DW_AT_high_pc as offset from DW_AT_low_pc in gdb-index.cc.
* dwarf_reader.cc (Dwarf_die::address_attribute): New function.
* dwarf_reader.h (Dwarf_die::address_attribute): Likewise.
* gdb-index.cc (Gdb_index_info_reader::record_cu_ranges): Handle
DW_AT_high_pc as offset from DW_AT_low_pc.
* testsuite/Makefile.am (gdb_index_test_3.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test_3.c: New test source file.
* testsuite/gdb_index_test_3.sh: New test source file.
Doug Evans [Tue, 1 May 2012 03:00:36 +0000 (03:00 +0000)]
* dwarf2read.c (init_cutu_and_read_dies): Renamed from
init_and_read_dies_worker. All callers updated.
(init_cu_and_read_dies, init_tu_and_read_dies): Delete. All calls
replaced with init_cutu_and_read_dies.
(load_partial_comp_unit): Pass 1 for use_existing_cu.
(find_partial_die): Remove FIXME. Don't free current CU.
testsuite/
* gdb.dwarf2/pr13961.S: New file.
* gdb.dwarf2/pr13961.exp: New file.
projects / thirdparty / binutils-gdb.git / log
