Documentation: qat: update sysfs-driver-qat for GEN6 devices
Reorganize and expand documentation for service configurations. This
reworks the `cfg_services` section by removing explicit service
combinations (e.g., asym;sym, sym;asym) and clarifying that multiple
services can be configured in any order.
Update the documentation to reflect that the attribute previously limited
to qat_4xxx devices is also applicable to qat_6xxx devices.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: qat - add support for decompression service to GEN6 devices
Add support to configure decompression as a separate service for QAT GEN6
devices. A new arbiter configuration has been added to map the hardware
decompression threads to all ring pairs.
The decompression service is enabled via sysfs by writing "decomp" to
"/sys/bus/pci/devices/<BDF>/qat/cfg_services".
The decompression service is not supported on QAT GEN2 and GEN4 devices,
and attempting it results in an invalid write error. The existing
compression service for QAT GEN2 and GEN4 devices remains unchanged and
supports both compression and decompression operations on the same ring
pair.
crypto: qat - fix state restore for banks with exceptions
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com> Fixes: bbfdde7d195f ("crypto: qat - add bank save and restore flows") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ahsan Atta [Wed, 4 Jun 2025 08:23:43 +0000 (09:23 +0100)]
crypto: qat - allow enabling VFs in the absence of IOMMU
The commit ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs") Signed-off-by: Ahsan Atta <ahsan.atta@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Michal Witwicki <michal.witwicki@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Amit Singh Tomar [Wed, 28 May 2025 14:59:41 +0000 (20:29 +0530)]
crypto: octeontx2 - get engine group number for asymmetric engine
Cryptographic Accelerator Unit (CPT) support different engine groups, one
for asymmetric algorithms (only AE engines in this group), one for the
most common symmetric algorithms (all SE and all IE engines in this group),
and one for other symmetric algorithms (only SE engines in this group).
For symmetric engine (SE), we obtain the group number using
"MBOX_MSG_GET_ENG_GRP_NUM" mailbox. Let's follow a similar approach to
determine the group number for asymmetric engine (AE).
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Amit Singh Tomar [Wed, 28 May 2025 14:59:40 +0000 (20:29 +0530)]
crypto: octeontx2 - Rework how engine group number is obtained
By default, otx2_cpt_get_kcrypto_eng_grp_num() returns the engine group
number of SE engine type. Add an engine type parameter to support
retrieving the engine group number for different engine types.
Since otx2_cpt_get_kcrypto_eng_grp_num() always returns the kernel crypto
engine group number, rename it to otx2_cpt_get_eng_grp_num().
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 24 May 2025 12:32:20 +0000 (20:32 +0800)]
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Fri, 23 May 2025 12:28:56 +0000 (20:28 +0800)]
crypto: s390/sha3 - Use cpu byte-order when exporting
The sha3 partial hash on s390 is in little-endian just like the
final hash. However the generic implementation produces native
or big-endian partial hashes.
Make s390 sha3 conform to that by doing the byte-swap on export
and import.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com> Fixes: 6f90ba706551 ("crypto: s390/sha3 - Use API partial block handling") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bharat Bhushan [Thu, 22 May 2025 10:06:27 +0000 (15:36 +0530)]
crypto: octeontx2 - Fix address alignment on CN10KB and CN10KA-B0
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Bharat Bhushan [Thu, 22 May 2025 10:06:26 +0000 (15:36 +0530)]
crypto: octeontx2 - Fix address alignment on CN10K A0/A1 and OcteonTX2
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Bharat Bhushan [Thu, 22 May 2025 10:06:25 +0000 (15:36 +0530)]
crypto: octeontx2 - Fix address alignment issue on ucode loading
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Completion address should be 32-Byte alignment when loading
microcode.
crypto: qat - use unmanaged allocation for dc_data
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2") Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Vegard Nossum [Wed, 21 May 2025 12:55:19 +0000 (14:55 +0200)]
crypto: testmgr - desupport SHA-1 for FIPS 140
The sunset period of SHA-1 is approaching [1] and FIPS 140 certificates
have a validity of 5 years. Any distros starting FIPS certification for
their kernels now would therefore most likely end up on the NIST
Cryptographic Module Validation Program "historical" list before their
certification expires.
While SHA-1 is technically still allowed until Dec. 31, 2030, it is
heavily discouraged by NIST and it makes sense to set .fips_allowed to
0 now for any crypto algorithms that reference it in order to avoid any
costly surprises down the line.
Acked-by: Stephan Mueller <smueller@chronox.de> Cc: Marcus Meissner <meissner@suse.de> Cc: Jarod Wilson <jarod@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: John Haxby <john.haxby@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ccp - Add missing bootloader info reg for pspv6
The bootloader info reg for pspv6 is the same as pspv4 and pspv5.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ovidiu Panait [Mon, 19 May 2025 15:13:48 +0000 (18:13 +0300)]
crypto: sun8i-ce - fix nents passed to dma_unmap_sg()
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
Herbert Xu [Tue, 13 May 2025 06:04:11 +0000 (14:04 +0800)]
crypto: aspeed/hash - Fix potential overflow in dma_prepare_sg
The mapped SG lists are written to hash_engine->ahash_src_addr which
has the size ASPEED_HASH_SRC_DMA_BUF_LEN. Since scatterlists are
not bound in size, make sure that size is not exceeded.
If the mapped SG list is larger than the buffer, simply iterate
over it as is done in the dma_prepare case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Tue, 13 May 2025 06:04:06 +0000 (14:04 +0800)]
crypto: aspeed/hash - Add fallback
If a hash request fails due to a DMA mapping error, or if it is too
large to fit in the the driver buffer, use a fallback to do the hash
rather than failing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Tue, 13 May 2025 06:03:57 +0000 (14:03 +0800)]
crypto: aspeed/hash - Move sham_final call into sham_update
The only time when sham_final needs to be called in sham_finup
is when the finup request fits into the partial block. Move this
special handling into sham_update.
The comment about releaseing resources is non-sense. The Crypto
API does not mandate the use of final so the user could always go
away after an update and never come back. Therefore the driver
must not hold any resources after an update call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hmac implementation in aspeed simply duplicates what the new
ahash hmac template already does, namely construct ipad and opad
by hand and then adding them to the hash before feeding it to the
engine.
Remove them and just use the generic ahash hmac template.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Wed, 4 Jun 2025 09:54:41 +0000 (17:54 +0800)]
crypto: ahash - Add support for drivers with no fallback
Some drivers cannot have a fallback, e.g., because the key is held
in hardware. Allow these to be used with ahash by adding the bit
CRYPTO_ALG_NO_FALLBACK.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Eric Biggers [Tue, 10 Jun 2025 19:16:00 +0000 (12:16 -0700)]
crypto: hkdf - move to late_initcall
The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.
Fixes: ef93f1562803 ("Revert "crypto: run initcalls for generic implementations earlier"") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sun, 8 Jun 2025 18:33:00 +0000 (11:33 -0700)]
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Linus Torvalds [Sun, 8 Jun 2025 18:27:20 +0000 (11:27 -0700)]
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Zhang Rui [Fri, 30 May 2025 00:09:28 +0000 (08:09 +0800)]
tools/power turbostat: Avoid probing the same perf counters
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Sat, 17 May 2025 09:44:50 +0000 (17:44 +0800)]
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: Add Android support for MSR device handling
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sun, 8 Jun 2025 18:07:33 +0000 (11:07 -0700)]
Merge tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Linus Torvalds [Sun, 8 Jun 2025 18:02:53 +0000 (11:02 -0700)]
Merge tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Linus Torvalds [Sun, 8 Jun 2025 17:35:12 +0000 (10:35 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Linus Torvalds [Sun, 8 Jun 2025 17:20:21 +0000 (10:20 -0700)]
Merge tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Linus Torvalds [Sun, 8 Jun 2025 15:19:01 +0000 (08:19 -0700)]
Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Linus Torvalds [Sat, 7 Jun 2025 17:05:35 +0000 (10:05 -0700)]
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Linus Torvalds [Sat, 7 Jun 2025 17:00:03 +0000 (10:00 -0700)]
Merge tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Linus Torvalds [Sat, 7 Jun 2025 16:56:18 +0000 (09:56 -0700)]
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
Linus Torvalds [Sat, 7 Jun 2025 16:40:08 +0000 (09:40 -0700)]
Merge tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Linus Torvalds [Sat, 7 Jun 2025 14:24:07 +0000 (07:24 -0700)]
Merge tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
Mike Rapoport [Sat, 17 May 2025 09:30:48 +0000 (12:30 +0300)]
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/ Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Thomas Huth [Fri, 14 Mar 2025 07:10:03 +0000 (08:10 +0100)]
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Al Viro [Wed, 4 Jun 2025 16:27:08 +0000 (12:27 -0400)]
do_change_type(): refuse to operate on unmounted/not ours mounts
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 2 Jun 2025 00:11:06 +0000 (20:11 -0400)]
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org> Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 7 Jun 2025 05:06:57 +0000 (22:06 -0700)]
Merge tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
Linus Torvalds [Sat, 7 Jun 2025 04:45:45 +0000 (21:45 -0700)]
Merge tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
Al Viro [Fri, 6 Jun 2025 22:31:03 +0000 (18:31 -0400)]
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
... and fix the breakage in anon-to-anon case. There are two cases
acceptable for do_move_mount() and mixing checks for those is making
things hard to follow.
One case is move of a subtree in caller's namespace.
* source and destination must be in caller's namespace
* source must be detachable from parent
Another is moving the entire anon namespace elsewhere
* source must be the root of anon namespace
* target must either in caller's namespace or in a suitable
anon namespace (see may_use_mount() for details).
* target must not be in the same namespace as source.
It's really easier to follow if tests are *not* mixed together...
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 3b5260d12b1f ("Don't propagate mounts into detached trees") Reported-by: Allison Karlitskaya <lis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs: allow clone_private_mount() for a path on real rootfs
Mounting overlayfs with a directory on real rootfs (initramfs)
as upperdir has failed with following message since commit db04662e2f4f ("fs: allow detached mounts in clone_private_mount()").
[ 4.080134] overlayfs: failed to clone upperpath
Overlayfs mount uses clone_private_mount() to create internal mount
for the underlying layers.
The commit made clone_private_mount() reject real rootfs because
it does not have a parent mount and is in the initial mount namespace,
that is not an anonymous mount namespace.
This issue can be fixed by modifying the permission check
of clone_private_mount() following [1].
Al Viro [Tue, 3 Jun 2025 21:57:27 +0000 (17:57 -0400)]
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
9ffb14ef61ba "move_mount: allow to add a mount into an existing group"
breaks assertions on ->mnt_share/->mnt_slave. For once, the data structures
in question are actually documented.
Documentation/filesystem/sharedsubtree.rst:
All vfsmounts in a peer group have the same ->mnt_master. If it is
non-NULL, they form a contiguous (ordered) segment of slave list.
do_set_group() puts a mount into the same place in propagation graph
as the old one. As the result, if old mount gets events from somewhere
and is not a pure event sink, new one needs to be placed next to the
old one in the slave list the old one's on. If it is a pure event
sink, we only need to make sure the new one doesn't end up in the
middle of some peer group.
"move_mount: allow to add a mount into an existing group" ends up putting
the new one in the beginning of list; that's definitely not going to be
in the middle of anything, so that's fine for case when old is not marked
shared. In case when old one _is_ marked shared (i.e. is not a pure event
sink), that breaks the assumptions of propagation graph iterators.
Put the new mount next to the old one on the list - that does the right thing
in "old is marked shared" case and is just as correct as the current behaviour
if old is not marked shared (kudos to Pavel for pointing that out - my original
suggested fix changed behaviour in the "nor marked" case, which complicated
things for no good reason).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 9ffb14ef61ba ("move_mount: allow to add a mount into an existing group") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 4 May 2025 17:28:37 +0000 (13:28 -0400)]
finish_automount(): don't leak MNT_LOCKED from parent to child
Intention for MNT_LOCKED had always been to protect the internal
mountpoints within a subtree that got copied across the userns boundary,
not the mountpoint that tree got attached to - after all, it _was_
exposed before the copying.
For roots of secondary copies that is enforced in attach_recursive_mnt() -
MNT_LOCKED is explicitly stripped for those. For the root of primary
copy we are almost always guaranteed that MNT_LOCKED won't be there,
so attach_recursive_mnt() doesn't bother. Unfortunately, one call
chain got overlooked - triggering e.g. NFS referral will have the
submount inherit the public flags from parent; that's fine for such
things as read-only, nosuid, etc., but not for MNT_LOCKED.
This is particularly pointless since the mount attached by finish_automount()
is usually expirable, which makes any protection granted by MNT_LOCKED
null and void; just wait for a while and that mount will go away on its own.
Include MNT_LOCKED into the set of flags to be ignored by do_add_mount() - it
really is an internal flag.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 1 Jun 2025 18:02:26 +0000 (14:02 -0400)]
path_overmount(): avoid false negatives
Holding namespace_sem is enough to make sure that result remains valid.
It is *not* enough to avoid false negatives from __lookup_mnt(). Mounts
can be unhashed outside of namespace_sem (stuck children getting detached
on final mntput() of lazy-umounted mount) and having an unrelated mount
removed from the hash chain while we traverse it may end up with false
negative from __lookup_mnt(). We need to sample and recheck the seqlock
component of mount_lock...
Bug predates the introduction of path_overmount() - it had come from
the code in finish_automount() that got abstracted into that helper.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 26df6034fdb2 ("fix automount/automount race properly") Fixes: 6ac392815628 ("fs: allow to mount beneath top mount") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Add backlight power control support
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
Linus Torvalds [Sat, 7 Jun 2025 01:02:37 +0000 (18:02 -0700)]
Merge tag 's390-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add missing select CRYPTO_ENGINE to CRYPTO_PAES_S390
- Fix secure storage access exception handling when fault handling is
disabled
* tag 's390-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix in_atomic() handling in do_secure_storage_access()
s390/crypto: Select crypto engine in Kconfig when PAES is chosen
Linus Torvalds [Sat, 7 Jun 2025 00:56:19 +0000 (17:56 -0700)]
Merge tag 'ceph-for-6.16-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- a one-liner that leads to a startling (but also very much rational)
performance improvement in cases where an IMA policy with rules that
are based on fsmagic matching is enforced
- an encryption-related fixup that addresses generic/397 and other
fstest failures
- a couple of cleanups in CephFS
* tag 'ceph-for-6.16-rc1' of https://github.com/ceph/ceph-client:
ceph: fix variable dereferenced before check in ceph_umount_begin()
ceph: set superblock s_magic for IMA fsmagic matching
ceph: cleanup hardcoded constants of file handle size
ceph: fix possible integer overflow in ceph_zero_objects()
ceph: avoid kernel BUG for encrypted inode with unaligned file size
Linus Torvalds [Sat, 7 Jun 2025 00:54:09 +0000 (17:54 -0700)]
Merge tag 'ovl-update-v2-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a regression in getting the path of an open file (e.g. in
/proc/PID/maps) for a nested overlayfs setup (André Almeida)
- Support data-only layers and verity in a user namespace (unprivileged
composefs use case)
- Fix a gcc warning (Kees)
- Cleanups
* tag 'ovl-update-v2-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Annotate struct ovl_entry with __counted_by()
ovl: Replace offsetof() with struct_size() in ovl_stack_free()
ovl: Replace offsetof() with struct_size() in ovl_cache_entry_new()
ovl: Check for NULL d_inode() in ovl_dentry_upper()
ovl: Use str_on_off() helper in ovl_show_options()
ovl: don't require "metacopy=on" for "verity"
ovl: relax redirect/metacopy requirements for lower -> data redirect
ovl: make redirect/metacopy rejection consistent
ovl: Fix nested backing file paths
Steven Rostedt [Thu, 5 Jun 2025 20:21:06 +0000 (16:21 -0400)]
tracing: PM: Remove unused clock events
The events clock_enable, clock_disable, and clock_set_rate were added back
in 2010. In 2011 they were used by the arm architecture but removed in
2013. These events add around 7K of memory which was wasted for the last 12
years.
Remove them.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kajetan Puchalski <kajetan.puchalski@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/20250605162106.1a459dad@gandalf.local.home Fixes: 74704ac6ea402 ("tracing, perf: Add more power related events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Dmitry Antipov [Fri, 6 Jun 2025 11:22:42 +0000 (14:22 +0300)]
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
Enlarge the critical section in ring_buffer_subbuf_order_set() to
ensure that error handling takes place with per-buffer mutex held,
thus preventing list corruption and other concurrency-related issues.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Link: https://lore.kernel.org/20250606112242.1510605-1-dmantipov@yandex.ru Reported-by: syzbot+05d673e83ec640f0ced9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=05d673e83ec640f0ced9 Fixes: f9b94daa542a8 ("ring-buffer: Set new size of the ring buffer sub page") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
projects / thirdparty / kernel / stable.git / log
