Bob Wilson [Tue, 21 Mar 2006 20:34:38 +0000 (20:34 +0000)]
* config/tc-xtensa.c (enforce_three_byte_loop_align): New flag.
(xtensa_setup_hw_workarounds): Set this new flag for older hardware.
(get_loop_align_size): New.
(xtensa_end): Skip xtensa_mark_narrow_branches when not aligning.
(xtensa_mark_zcl_first_insns): Prevent widening of first loop frag.
(get_text_align_power): Rewrite to handle inputs in the range 2-8.
(get_noop_aligned_address): Use get_loop_align_size.
(get_aligned_diff): Likewise.
Paul Brook [Mon, 20 Mar 2006 15:38:02 +0000 (15:38 +0000)]
2006-03-20 Paul Brook <paul@codesourcery.com>
gas/
* config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
(do_t_branch): Encode branches inside IT blocks as unconditional.
(do_t_cps): New function.
(do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
(opcode_lookup): Allow conditional suffixes on all instructions in
Thumb mode.
(md_assemble): Advance condexec state before checking for errors.
(insns): Use do_t_cps.
gas/testsuite/
* gas/arm/thumb2_bcond.d: New test.
* gas/arm/thumb2_bcond.s: New test.
* gas/arm/thumb2_it_bad.d: New test.
* gas/arm/thumb2_it_bad.l: New test.
* gas/arm/thumb2_it_bad.s: New test.
Dave Anglin [Mon, 20 Mar 2006 01:12:30 +0000 (01:12 +0000)]
* elf64-hppa.c (elf64_hppa_special_sections): Change flags for .tbss
section from SHF_PARISC_WEAKORDER to SHF_HP_TLS.
(elf_backend_special_sections): Remove #undef.
Alexandre Oliva [Fri, 17 Mar 2006 06:44:37 +0000 (06:44 +0000)]
bfd/ChangeLog:
* elf32-ppc.c (ppc_elf_relocate_section): Copy addend from
first relocation to the second when relaxing TLS GD to LE;
zero it out when relaxing to IE.
ld/testsuite/ChangeLog:
* ld-powerpc/tls32.s: Verify that +32768 @plt addend is
discarded.
Bernd Schmidt [Thu, 16 Mar 2006 19:09:25 +0000 (19:09 +0000)]
* gas/bfin/shift2.s: Add new tests.
* gas/bfin/shift.d: Match changed disassembler behaviour.
* gas/bfin/parallel2.d: Likewise.
* gas/bfin/shift2.d: Likewise; also match new tests.
* mips-linux-tdep.c: Include "floatformat.h".
(mips_linux_init_abi): Use 128-bit long double for N32 and N64.
(mips_n32n64_return_value): Support 128-bit long double.
(print_gp_register_row): Don't print spaces before ignored
or floating point registers.
* configure.ac: Remove checks for prfpregset_t.
* gdb_proc_service.h: New file.
* linux-i386-low.c, linux-x86-64-low.c, thread-db.c: Use the
new "gdb_proc_service.h".
* proc-service.c: Likewise.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t.
(ps_lgetfpregs, ps_lsetfpregs): Use a void* argument.
* Makefile.in (gdb_proc_service_h): Updated.
* configure, config.in: Regenerated.
Alan Modra [Wed, 15 Mar 2006 14:30:19 +0000 (14:30 +0000)]
* elf32-ppc.c (ppc_elf_check_relocs): REL24 and REL14 relocs
against __GLOBAL_OFFSET_TABLE__ need never be dynamic. Tweak
last change to REL32 relocs so that they are counted as
possibly dynamic as per REL24 and REL14.
bfd/
* elf32-mips.c (mips_elf_adjust_addend): New function, mostly split
out from...
(_bfd_mips_elf_relocate_section): ...here. Use it to adjust r_addend
for final links too.
ld/testsuite/
* ld-mips/emit-relocs-1a.s, ld-mips/emit-relocs-1b.s,
* ld-mips/emit-relocs-1.ld, ld-mips/emit-relocs-1.d: New test.
* ld-mips/mips-elf.exp: Run it.
DJ Delorie [Tue, 14 Mar 2006 03:34:28 +0000 (03:34 +0000)]
* mem.c (mem_put_byte): Hook simulated UART to stdout.
(mem_put_hi): Hook in simulated trace port.
(mem_get_byte): Hook in simulated uart control port.
* opc2c: Be more picky about matching special comments.
* r8c.opc (shift_op): Limit shift counts to -16..16.
(BMcnd): Map conditional codes.
* reg.c (condition_true): Mask condition code to 4 bits.
* syscalls.c: Include local syscall.h.
* syscall.h: New, copied from libgloss.
Ben Elliston [Mon, 13 Mar 2006 22:27:22 +0000 (22:27 +0000)]
* bucomm.c (display_target_list): Make local variable `a' to be of
type enum bfd_architecture. Thus no need to cast enums to int.
(display_info_table): Likewise.
Michael Snyder [Fri, 10 Mar 2006 20:15:42 +0000 (20:15 +0000)]
2006-03-09 Michael Snyder <msnyder@redhat.com>
* linux-nat.c (kill_inferior): Just call target_mourn_inferior
instead of getting tricky for the multi-fork case.
* linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid
for each fork, and then use init_fork_list to delete them.
Alan Modra [Fri, 10 Mar 2006 13:30:10 +0000 (13:30 +0000)]
* dwarf.c (process_extended_line_op): Remove pointer_size param.
Use length instead to determine address size.
(get_pointer_size_and_offset_of_comp_unit): Delete.
(display_debug_lines): Adjust for above.
(display_debug_aranges): Don't stop on finding two zeros.
(display_debug_frames): For warning, print offset not pointer.
Jim Blandy [Thu, 9 Mar 2006 21:42:31 +0000 (21:42 +0000)]
2006-03-07 Jim Blandy <jimb@red-bean.com>
* gdb.texinfo (Target Commands): Update text describing how to
specify a target. Refer to the detailed section on remote
debugging, not the brief mention.
Danny Smith [Thu, 9 Mar 2006 20:28:49 +0000 (20:28 +0000)]
* dlltool.c (add_stdcall_underscore): New flag.
(xlate): Also add underscore to stdcall symbol if
add_stdcall_underscore set.
(usage): Document --add-stdcall-underscore option.
(OPTION_ADD_STDCALL_UNDERSCORE): New define.
(long_options): Use it for --add-stdcall-underscore option.
(main): Handle it.
* doc/binutils.texi: Document --add-stdcall-underscore option
and differentiate from --add-underscore.
Alexandre Oliva [Thu, 9 Mar 2006 00:22:09 +0000 (00:22 +0000)]
gdb/ChangeLog:
* solib-svr4.c (svr4_current_sos): Move up initialization of
l_addr, such that it clearly covers all cases.
gdb/testsuite/ChangeLog:
* gdb.base/prelink.exp: Anchor tested-for regular expression
on gdb prompt.
projects / thirdparty / binutils-gdb.git / log
