Andreas Jaeger [Mon, 9 Jul 2001 14:22:11 +0000 (14:22 +0000)]
2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
(OP_J): Use bfd_vma for mask to work properly with 64 bits.
(op_address,op_riprel): Use bfd_vma to handle 64 bits.
Eli Zaretskii [Sun, 8 Jul 2001 10:28:20 +0000 (10:28 +0000)]
* go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
(read_memory_region, get_descriptor, display_descriptor)
(go32_sldt, go32_sgdt, go32_sidt): New functions.
(top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
away `disable' from dos.h, since breakpoint.h defines an enum
member of the same name, and GCC 2.7.2 barfs.
(_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
dos-gdt, and dos-idt, all of them in the "info" class
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (&tmp, raw, FPU_REG_RAW_SIZE);
! memset (&tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
--- 163,184 ----
DOUBLEST value;
int len = TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT;
char *tmp = alloca (len);
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (tmp, raw, FPU_REG_RAW_SIZE);
! memset (tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
Mark Kettenis [Fri, 6 Jul 2001 22:31:47 +0000 (22:31 +0000)]
* lin-lwp.c (count_events_callback): Fix formatting. Turn check
commented with "paranoia" into gdb_assert.
(select_event_lwp_callback): Likewise.
(cancel_breakpoints_callback): Bail out early if LP is the event
LWP. Add comment about backup up breakpoints. Fix formatting and
debug message.
(select_event_lwp): Make solely repsonsible for switching event
LWP. Fix formatting and remove bogus "ERROR" debug message.
Don't backup breakpoints from here.
(lin_lwp_wait): Don't touch LP->status, let select_event_lwp
handle that. Only call select_event_lwp if we're not waiting for
a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
John Healy [Fri, 6 Jul 2001 19:09:23 +0000 (19:09 +0000)]
2001-07-06 John Healy <jhealy@redhat.com>
* cgen.c (gas_cgen_save_fixups): Modified to allow more than one
set of fixups to be stored.
(gas_cgen_restore_fixups): Modified to allow the fixup chain to be
restored to be chosen from any that are saved.
(gas_cgen_swap_fixups): Modified to allow the current set of
fixups to be swapped with any other set that has been saved.
(gas_cgen_initialize_saved_fixups_array): New routine.
* cgen.h: Modifed prototypes for gas_cgen_save_fixups,
gas_cgen_restore_fixups, and gas_cgen_swap_fixups. Added definitions
or MAX_SAVED_FIXUP_CHAINS.
* config/tc-m32r.c (assemble_two_insns): Changed calls to fixup
store, swap and restore fuctions to reflect the new interface.
Michael Snyder [Fri, 6 Jul 2001 19:06:24 +0000 (19:06 +0000)]
2001-06-12 Michael Snyder <msnyder@redhat.com>
* lin-lwp.c: Prevent thread starvation by using a monte carlo
method to choose which of several event threads to handle next.
(stop_wait_callback): Defer pushback of breakpoint events until
later; add SIGTRAP events to the queue of unhandled events.
Keep calling waitpid until SIGSTOP retrieved. If more than one
non-SIGSTOP event is retrieved, push them back onto the process
queue using kill.
(count_events_callback, select_singlestep_lwp_callback,
select_event_lwp_callback, cancel_breakpoints_callback,
select_event_lwp): New functions. Implement monte carlo method
for selecting which of several SIGTRAP threads to handle next.
Push back the breakpoint event for all threads other than the
selected one.
(lin_lwp_wait): Call select_event_lwp to decide which of several
sigtrapped lwps to handle next.
(resume_callback): Disable code that attempts to handle
step_resume breakpoints. Let core gdb handle this.
Jim Blandy [Fri, 6 Jul 2001 14:44:19 +0000 (14:44 +0000)]
* gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
* gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
(build_gdbtypes): Initialize it.
(_initialize_gdbtypes): Swap it.
Jim Wilson [Fri, 6 Jul 2001 07:32:42 +0000 (07:32 +0000)]
32-bit unwind data for ia64-hpux, from Steve Ellcey
* config/tc-ia64.c (special_section): Add SPECIAL_SECTION_INIT_ARRAY
and SPECIAL_SECTION_FINI_ARRAY.
(special_section_name): Add .init_array and .fini_array.
(md_pseudo_table): Add init_array and fini_array.
(md): Add pointer_size and pointer_size_shift fields.
(setup_unwind_header): New static function.
(output_unw_records): Modify to use setup_unwind_header.
(generate_unwind_image, dot_endp): Modify to use md.pointer_size and
md.pointer_size_shift.
(md_begin): Initialize md.pointer_size and md.pointer_size_shift.
Jim Blandy [Thu, 5 Jul 2001 21:27:08 +0000 (21:27 +0000)]
* d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
d10v_write_sp, d10v_write_fp, d10v_read_fp,
d10v_push_return_address): Call the functions d10v_make_daddr,
d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
D10V_CONVERT_DADDR_TO_RAW.
Nick Clifton [Thu, 5 Jul 2001 10:52:25 +0000 (10:52 +0000)]
For sections containing uninitialised data, only set their size to s_paddr
if this does not reset their size to zero. MS's latest compilers will set
s_paddr to zero.
Andrew Cagney [Wed, 4 Jul 2001 20:52:14 +0000 (20:52 +0000)]
* gdbint.texinfo (Target Architecture Definition): GDBARCH is a C
structure and not macros.
(Host Definition): Document that much of this chapter is obsolete.
(Target Architecture Definition): Update list of files that make
up a target architecture.
(Coding): Update.
Jim Blandy [Wed, 4 Jul 2001 16:08:20 +0000 (16:08 +0000)]
* dwarf2read.c (struct partial_die_info): New member: has_pc_info.
(read_partial_die): Delete fourth argument; we return this info in
the struct partial_die_info object itself now.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
has_pc_info field of the partial die struct, rather than passing a
variable by reference to read_partial_die.
Jim Blandy [Wed, 4 Jul 2001 16:00:08 +0000 (16:00 +0000)]
* dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
code in loop condition. This seemed to be trying to round
info_ptr up to the next four-byte boundary, but that's not what it
actually did. If we discover the problem the old code was really
trying to address, we can fix it properly.
[gas]
* config/tc-mips.c (md_apply_fix): Prevent addend from becoming zero
if it's expected to be non-zero.
[gas/testsuite]
* gas/mips/elf-rel3.s: Add zero word to end of file.
Michael Snyder [Tue, 3 Jul 2001 21:01:59 +0000 (21:01 +0000)]
2001-06-29 Ken Whaley <ken@believe.com>
* thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
to TD_THR_UNKNOWN when looking for defunct zombie threads.
(thread_db_thread_alive): Ditto.
(find_new_threads_callback): Ditto.
projects / thirdparty / binutils-gdb.git / log
