Junio C Hamano [Thu, 30 Jan 2020 22:17:08 +0000 (14:17 -0800)]
Merge branch 'ds/graph-horizontal-edges'
Rendering by "git log --graph" of ancestry lines leading to a merge
commit were made suboptimal to waste vertical space a bit with a
recent update, which has been corrected.
* ds/graph-horizontal-edges:
graph: fix collapse of multiple edges
graph: add test to demonstrate horizontal line bug
Junio C Hamano [Thu, 30 Jan 2020 22:17:08 +0000 (14:17 -0800)]
Merge branch 'ds/sparse-cone'
The code recently added in this release to move to the entry beyond
the ones in the same directory in the index in the sparse-cone mode
did not count the number of entries to skip over incorrectly, which
has been corrected.
Denton Liu [Tue, 14 Jan 2020 02:49:38 +0000 (21:49 -0500)]
.mailmap: fix erroneous authorship for Johannes Schindelin
In 49e268e23e (mingw: safeguard better against backslashes in file
names, 2020-01-09), the commit author is listed as
"Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>", which
is erroneous. Fix the authorship by mapping the erroneous authorship to
his canonical authorship information.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 22 Jan 2020 23:07:31 +0000 (15:07 -0800)]
Merge branch 'es/unpack-trees-oob-fix'
The code that tries to skip over the entries for the paths in a
single directory using the cache-tree was not careful enough
against corrupt index file.
* es/unpack-trees-oob-fix:
unpack-trees: watch for out-of-range index position
Junio C Hamano [Wed, 22 Jan 2020 23:07:30 +0000 (15:07 -0800)]
Merge branch 'jt/sha1-file-remove-oi-skip-cached'
has_object_file() said "no" given an object registered to the
system via pretend_object_file(), making it inconsistent with
read_object_file(), causing lazy fetch to attempt fetching an
empty tree from promisor remotes.
Junio C Hamano [Wed, 22 Jan 2020 23:07:30 +0000 (15:07 -0800)]
Merge branch 'hw/commit-advise-while-rejecting'
"git commit" gives output similar to "git status" when there is
nothing to commit, but without honoring the advise.statusHints
configuration variable, which has been corrected.
* hw/commit-advise-while-rejecting:
commit: honor advice.statusHints when rejecting an empty commit
gpg-interface: add minTrustLevel as a configuration option
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
Derrick Stolee [Wed, 8 Jan 2020 04:27:55 +0000 (04:27 +0000)]
graph: fix collapse of multiple edges
This fix resolves the previously-added test_expect_failure in
t4215-log-skewed-merges.sh.
The issue lies in the "else" condition while updating the mapping
inside graph_output_collapsing_line(). In 0f0f389f (graph: tidy up
display of left-skewed merges, 2019-10-15), the output of left-
skewed merges was changed to allow an immediate horizontal edge in
the first parent, output by graph_output_post_merge_line() instead
of by graph_output_collapsing_line(). This condensed the first line
behavior as follows:
However, a very subtle issue arose when the second and third parent
edges are collapsed in later steps. The second parent edge is now
immediately adjacent to a vertical edge. This means that the
condition
} else if (graph->mapping[i - 1] < 0) {
in graph_output_collapsing_line() evaluates as false. The block for
this condition was the only place where we connected the target
column with the current position with horizontal edge markers.
In this case, the final "else" block is run, and the edge is marked
as horizontal, but did not back-fill the blank columns between the
target and the current edge. Since the second parent edge is marked
as horizontal, the third parent edge is not marked as horizontal.
This causes the output to continue as follows:
Derrick Stolee [Wed, 8 Jan 2020 04:27:54 +0000 (04:27 +0000)]
graph: add test to demonstrate horizontal line bug
A previous test in t4215-log-skewed-merges.sh was added to demonstrate
exactly the topology of a reported failure in "git log --graph". While
investigating the fix, we realized that multiple edges that could
collapse with horizontal lines were not doing so.
The behavior changed logically in 479db18b ("graph: smooth appearance
of collapsing edges on commit lines", 2019-10-15), but was actually
broken due to an assert() bug in 458152cc ("graph: example of graph
output that can be simplified", 2019-10-15). A future change could
modify this behavior to do the following instead:
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the next patch, I also noticed that quotes testing via
`"\"file\\101.t\""` was somewhat incorrect: I escaped `\` one time while
I had to escape it two times! Tests still worked due to `"` being
preserved which in turn prevented pathspec from matching files.
Fix this by using here-doc instead.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: add tests for error conditions with --pathspec-from-file
Also move some old tests into the new tests: it doesn't seem reasonable
to have individual error condition tests.
Old test for `git commit` was corrected, previously it was instructed
to use stdin but wasn't provided with any stdin. While this works at
the moment, it's not exactly perfect.
Old tests for `git reset` were improved to test for a specific error
message.
Suggested-By: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: safeguard better against backslashes in file names
In 224c7d70fa1 (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clear_ce_flags_dir() method processes the cache entries within
a common directory. The returned int is the number of cache entries
processed by that directory. When using the sparse-checkout feature
in cone mode, we can skip the pattern matching for entries in the
directories that are entirely included or entirely excluded.
eb42feca (unpack-trees: hash less in cone mode, 2019-11-21)
introduced this performance feature. The old mechanism relied on
the counts returned by calling clear_ce_flags_1(), but the new
mechanism calculated the number of rows by subtracting "cache_end"
from "cache" to find the size of the range. However, the equation
is wrong because it divides by sizeof(struct cache_entry *). This
is not how pointer arithmetic works!
A coverity build of Git for Windows in preparation for the 2.25.0
release found this issue with the warning, "Pointer differences,
such as cache_end - cache, are automatically scaled down by the
size (8 bytes) of the pointed-to type (struct cache_entry *).
Most likely, the division by sizeof(struct cache_entry *) is
extraneous and should be eliminated." This warning is correct.
This leaves us with the question "how did this even work?" The
problem that occurs with this incorrect pointer arithmetic is
a performance-only bug, and a very slight one at that. Since
the entry count returned by clear_ce_flags_dir() is reduced by
a factor of 8, the loop in clear_ce_flags_1() will re-process
entries from those directories.
By inserting global counters into unpack-tree.c and tracing
them with trace2_data_intmax() (in a private change, for
testing), I was able to see count how many times the loop inside
clear_ce_flags_1() processed an entry and how many times
clear_ce_flags_dir() was called. Each of these are reduced by at
least a factor of 8 with the current change. A factor larger
than 8 happens when multiple levels of directories are repeated.
Specifically, in the Linux kernel repo, the command
git sparse-checkout set LICENSES
restricts the working directory to only the files at root and
in the LICENSES directory. Here are the measured counts:
While these are dramatic counts, the time spent in
clear_ce_flags_1() is under one millisecond in each case, so
the improvement is not measurable as an end-to-end time.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Wed, 8 Jan 2020 20:08:44 +0000 (21:08 +0100)]
config/advice.txt: fix description list separator
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Jan 2020 20:44:12 +0000 (12:44 -0800)]
Merge branch 'ds/graph-assert-fix'
Since recent updates to the log graph rendering code, drawing
certain merges started triggering an assert on a condition that
would no longer hold true, which has been corrected.
* ds/graph-assert-fix:
graph: fix lack of color in horizontal lines
graph: drop assert() for merge with two collapsing parents
Junio C Hamano [Wed, 8 Jan 2020 19:17:16 +0000 (11:17 -0800)]
Merge https://github.com/prati0100/git-gui
* https://github.com/prati0100/git-gui:
git-gui: allow opening currently selected file in default app
git-gui: allow closing console window with Escape
git gui: fix branch name encoding error
git-gui: revert untracked files by deleting them
git-gui: update status bar to track operations
git-gui: consolidate naming conventions
Derrick Stolee [Tue, 7 Jan 2020 21:27:02 +0000 (21:27 +0000)]
graph: fix lack of color in horizontal lines
In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net> Reported-by: Bradley Smith <brad@brad-smith.co.uk> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 8 Jan 2020 07:10:09 +0000 (02:10 -0500)]
transport: don't flush when disconnecting stateless-rpc helper
Since ba227857d2 (Reduce the number of connects when fetching,
2008-02-04), when we disconnect a git transport, we send a final flush
packet. This cleanly tells the other side that we're done, and avoids
the other side complaining "the remote end hung up unexpectedly" (though
we'd only see that for transports that pass along the server stderr,
like ssh or local-host).
But when we've initiated a v2 stateless-connect session over a transport
helper, there's no point in sending this flush packet. Each operation
we've performed is self-contained, and the other side is fine with us
hanging up between operations.
But much worse, by sending the flush packet we may cause the helper to
issue an entirely new request _just_ to send the flush packet. So we can
incur an extra network request just to say "by the way, we have nothing
more to send".
Let's drop this extra flush packet. As the test shows, this reduces the
number of POSTs required for a v2 ls-remote over http from 2 to 1.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emily Shaffer [Wed, 8 Jan 2020 02:31:27 +0000 (18:31 -0800)]
unpack-trees: watch for out-of-range index position
It's possible in a case where the index file contains a tree extension
but no blobs within that tree exist for index_pos_by_traverse_info() to
segfault. If the name_entry passed into index_pos_by_traverse_info() has
no blobs inside, AND is alphabetically later than all blobs currently in
the index file, index_pos_by_traverse_info() will segfault. For example,
an index file which looks something like this:
aaa#0
bbb/aaa#0
[Extensions]
TREE: zzz
In this example, 'index_name_pos(..., "zzz/", ...)' will return '-4',
indicating that "zzz/" could be inserted at position 3. However, when
the checks which ensure that the insertion position of "zzz/" look for a
blob at that position beginning with "zzz/", the index cache is accessed
out of range, causing a segfault.
This kind of index state is not typically generated during user
operations, and is in fact an edge case of the state being checked for
in the conditional where it was added. However, since the entry for the
BUG() line is ambiguous, tell some additional context to help Git
developers debug the failure later. When we know the name of the dir we
were trying to look up, it becomes possible to examine the index file
in a hex util to determine what went wrong; the position gives a hint
about where to start looking.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 8 Jan 2020 11:43:44 +0000 (06:43 -0500)]
restore: invalidate cache-tree when removing entries with --staged
When "git restore --staged <path>" removes a path that's in the index,
it marks the entry with CE_REMOVE, but we don't do anything to
invalidate the cache-tree. In the non-staged case, we end up in
checkout_worktree(), which calls remove_marked_cache_entries(). That
actually drops the entries from the index, as well as invalidating the
cache-tree and untracked-cache.
But with --staged, we never call checkout_worktree(), and the CE_REMOVE
entries remain. Interestingly, they are dropped when we write out the
index, but that means the resulting index is inconsistent: its
cache-tree will not match the actual entries, and running "git commit"
immediately after will create the wrong tree.
We can solve this by calling remove_marked_cache_entries() ourselves
before writing out the index. Note that we can't just hoist it out of
checkout_worktree(); that function needs to iterate over the CE_REMOVE
entries (to drop their matching worktree files) before removing them.
One curiosity about the test: without this patch, it actually triggers a
BUG() when running git-restore:
BUG: cache-tree.c:810: new1 with flags 0x4420000 should not be in cache-tree
But in the original problem report, which used a similar recipe,
git-restore actually creates the bogus index (and the commit is created
with the wrong tree). I'm not sure why the test here behaves differently
than my out-of-suite reproduction, but what's here should catch either
symptom (and the fix corrects both cases).
Reported-by: Torsten Krah <krah.tm@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Heba Waly [Wed, 8 Jan 2020 00:31:36 +0000 (00:31 +0000)]
doc/gitcore-tutorial: fix prose to match example command
In 328c6cb853 (doc: promote "git switch", 2019-03-29), an example
was changed to use "git switch" rather than "git checkout" but an
instance of "git checkout" in the explanatory text preceding the
example was overlooked. Fix this oversight.
Signed-off-by: Heba Waly <heba.waly@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command: avoid undefined behavior in exists_in_PATH
In this function, we free the pointer we get from locate_in_PATH and
then check whether it's NULL. However, this is undefined behavior if
the pointer is non-NULL, since the C standard no longer permits us to
use a valid pointer after freeing it.
The only case in which the C standard would permit this to be defined
behavior is if r were NULL, since it states that in such a case "no
action occurs" as a result of calling free.
It's easy to suggest that this is not likely to be a problem, but we
know that GCC does aggressively exploit the fact that undefined
behavior can never occur to optimize and rewrite code, even when that's
contrary to the expectations of the programmer. It is, in fact, very
common for it to omit NULL pointer checks, just as we have here.
Since it's easy to fix, let's do so, and avoid a potential headache in
the future.
Noticed-by: Miriam R. <mirucam@gmail.com> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 7 Jan 2020 15:07:30 +0000 (15:07 +0000)]
string-list: note in docs that callers can specify sorting function
In commit 1959bf6430 (string_list API: document what "sorted" means,
2012-09-17), Documentation/technical/api-string-list.txt was updated to
specify that strcmp() was used for sorting. In commit 8dd5afc926
(string-list: allow case-insensitive string list, 2013-01-07), a cmp
member was added to struct string_list to allow callers to specify an
alternative comparison function, but api-string-list.txt was not
updated. In commit 4f665f2cf3 (string-list.h: move documentation from
Documentation/api/ into header, 2017-09-26), the now out-dated
api-string-list.txt documentation was moved into string-list.h. Update
the docs to reflect the configurability of sorting.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 7 Jan 2020 06:57:57 +0000 (06:57 +0000)]
unpack-trees: exit check_updates() early if updates are not wanted
check_updates() has a lot of code that repeatedly checks whether
o->update or o->dry_run are set. (Note that o->dry_run is a
near-synonym for !o->update, but not quite as per commit 2c9078d05bf2
("unpack-trees: add the dry_run flag to unpack_trees_options",
2011-05-25).) In fact, this function almost turns into a no-op whenever
the condition
!o->update || o->dry_run
is met. Simplify the code by checking this condition at the beginning
of the function, and when it is true, do the few things that are
relevant and return early.
There are a few things that make the conversion not quite obvious:
* The fact that check_updates() does not actually turn into a no-op
when updates are not wanted may be slightly surprising. However,
commit 33ecf7eb61 (Discard "deleted" cache entries after using them
to update the working tree, 2008-02-07) put the discarding of
unused cache entries in check_updates() so we still need to keep
the call to remove_marked_cache_entries(). It's possible this
call belongs in another function, but it is certainly needed as
tests will fail if it is removed.
* The original called remove_scheduled_dirs() unconditionally.
Technically, commit 7847892716 (unlink_entry(): introduce
schedule_dir_for_removal(), 2009-02-09) should have made that call
conditional, but it didn't matter in practice because
remove_scheduled_dirs() becomes a no-op when all the calls to
unlink_entry() are skipped. As such, we do not need to call it.
* When (o->dry_run && o->update), the original would have two calls
to git_attr_set_direction() surrounding a bunch of skipped updates.
These two calls to git_attr_set_direction() cancel each other out
and thus can be omitted when o->dry_run is true just as they
already are when !o->update.
* The code would previously call setup_collided_checkout_detection()
and report_collided_checkout() even when o->dry_run. However, this
was just an expensive no-op because
setup_collided_checkout_detection() merely cleared the CE_MATCHED
flag for each cache entry, and report_collided_checkout() reported
which ones had it set. Since a dry-run would skip all the
checkout_entry() calls, CE_MATCHED would never get set and thus
no collisions would be reported. Since we can't detect the
collisions anyway without doing updates, skipping the collisions
detection setup and reporting is an optimization.
* The code previously would call get_progress() and
display_progress() even when (!o->update || o->dry_run). This
served to show how long it took to skip all the updates, which is
somewhat useless. Since we are skipping the updates, we can skip
showing how long it takes to skip them.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Jan 2020 22:17:51 +0000 (14:17 -0800)]
Merge branch 'ds/commit-graph-set-size-mult'
The code to write split commit-graph file(s) upon fetching computed
bogus value for the parameter used in splitting the resulting
files, which has been corrected.
* ds/commit-graph-set-size-mult:
commit-graph: prefer default size_mult when given zero
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
Previously, the .editorconfig did not specify an indentation style for
text files. However, a quick look for indentation-like spacing suggest
that tabs are more common for documentation:
Note that there are a lot of files that indent list continuations (and
other things) with a single space -- if the first search was made
without the fixed quantifier the result would look very different.
However, the result does correspond with my anecdotal experience when
editing git documentation.
This commit adds *.txt to .editorconfig as an extension that should be
indented with tabs.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Menzel [Fri, 3 Jan 2020 15:05:46 +0000 (16:05 +0100)]
am: document that Date: can appear as an in-body header
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 2 Jan 2020 16:14:14 +0000 (16:14 +0000)]
commit-graph: prefer default size_mult when given zero
In 50f26bd ("fetch: add fetch.writeCommitGraph config setting",
2019-09-02), the fetch builtin added the capability to write a
commit-graph using the "--split" feature. This feature creates
multiple commit-graph files, and those can merge based on a set
of "split options" including a size multiple. The default size
multiple is 2, which intends to provide a log_2 N depth of the
commit-graph chain where N is the number of commits.
However, I noticed during dogfooding that my commit-graph chains
were becoming quite large when left only to builds by 'git fetch'.
It turns out that in split_graph_merge_strategy(), we default the
size_mult variable to 2 except we override it with the context's
split_opts if they exist. In builtin/fetch.c, we create such a
split_opts, but do not populate it with values.
This problem is due to two failures:
1. It is unclear that we can add the flag COMMIT_GRAPH_WRITE_SPLIT
with a NULL split_opts.
2. If we have a non-NULL split_opts, then we override the default
values even if a zero value is given.
Correct both of these issues. First, do not override size_mult when
the options provide a zero value. Second, stop creating a split_opts
in the fetch builtin.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: only test index entries for backslashes, not tree entries
During a clone of a repository that contained a file with a backslash in
its name in the past, as of v2.24.1(2), Git for Windows prints errors
like this:
error: filename in tree entry contains backslash: '\'
The idea is to prevent Git from even trying to write files with
backslashes in their file names: while these characters are valid in
file names on other platforms, on Windows it is interpreted as directory
separator (which would obviously lead to ambiguities, e.g. when there is
a file `a\b` and there is also a file `a/b`).
Arguably, this is the wrong layer for that error: As long as the user
never checks out the files whose names contain backslashes, there should
not be any problem in the first place.
So let's loosen the requirements: we now leave tree entries with
backslashes in their file names alone, but we do require any entries
that are added to the Git index to contain no backslashes on Windows.
Note: just as before, the check is guarded by `core.protectNTFS` (to
allow overriding the check by toggling that config setting), and it
is _only_ performed on Windows, as the backslash is not a directory
separator elsewhere, even when writing to NTFS-formatted volumes.
An alternative approach would be to try to prevent creating files with
backslashes in their file names. However, that comes with its own set of
problems. For example, `git config -f C:\ProgramData\Git\config ...` is
a very valid way to specify a custom config location, and we obviously
do _not_ want to prevent that. Therefore, the approach chosen in this
patch would appear to be better.
This addresses https://github.com/git-for-windows/git/issues/2435
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 2 Jan 2020 20:16:30 +0000 (12:16 -0800)]
sha1-file: remove OBJECT_INFO_SKIP_CACHED
In a partial clone, if a user provides the hash of the empty tree ("git
mktree </dev/null" - for SHA-1, this is 4b825d...) to a command which
requires that that object be parsed, for example:
git diff-tree 4b825d <a non-empty tree>
then Git will lazily fetch the empty tree, unnecessarily, because
parsing of that object invokes repo_has_object_file(), which does not
special-case the empty tree.
Instead, teach repo_has_object_file() to consult find_cached_object()
(which handles the empty tree), thus bringing it in line with the rest
of the object-store-accessing functions. A cost is that
repo_has_object_file() will now need to oideq upon each invocation, but
that is trivial compared to the filesystem lookup or the pack index
search required anyway. (And if find_cached_object() needs to do more
because of previous invocations to pretend_object_file(), all the more
reason to be consistent in whether we present cached objects.)
As a historical note, the function now known as repo_read_object_file()
was taught the empty tree in 346245a1bb ("hard-code the empty tree
object", 2008-02-13), and the function now known as oid_object_info()
was taught the empty tree in c4d9986f5f ("sha1_object_info: examine
cached_object store too", 2011-02-07). repo_has_object_file() was never
updated, perhaps due to oversight. The flag OBJECT_INFO_SKIP_CACHED,
introduced later in dfdd4afcf9 ("sha1_file: teach
sha1_object_info_extended more flags", 2017-06-26) and used in e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags", 2017-06-26),
was introduced to preserve this difference in empty-tree handling, but
now it can be removed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 1 Jan 2020 05:20:57 +0000 (05:20 +0000)]
merge-recursive: remove unnecessary oid_eq function
Back when merge-recursive was first introduced in commit 6d297f8137
(Status update on merge-recursive in C, 2006-07-08), it created a
sha_eq() function. This function pre-dated the introduction of
hashcmp() to cache.h by about a month, but was switched over to using
hashcmp() as part of commit 9047ebbc22 (Split out merge_recursive() to
merge-recursive.c, 2008-08-12). In commit b4da9d62f9 (merge-recursive:
convert leaf functions to use struct object_id, 2016-06-24), sha_eq() was
renamed to oid_eq() and its hashcmp() call was switched to oideq().
oid_eq() is basically just a wrapper around oideq() that has some extra
checks to protect against NULL arguments or to allow short-circuiting if
one of the arguments is NULL. I don't know if any caller ever tried to
call with NULL arguments, but certainly none do now which means the
extra checks serve no purpose. (Also, if these checks were genuinely
useful, then they probably should be added to the main oideq() so all
callers could benefit from them.)
Reduce the cognitive overhead of having both oid_eq() and oideq(), by
getting rid of merge-recursive's special oid_eq() wrapper.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 31 Dec 2019 13:17:48 +0000 (13:17 +0000)]
sparse-checkout: use extern for global variables
When the core.sparseCheckoutCone config setting was added in 879321eb0b ("sparse-checkout: add 'cone' mode" 2019-11-21), the
variables storing the config values for core.sparseCheckout and
core.sparseCheckoutCone were rearranged in cache.h, but in doing
so the "extern" keyword was dropped.
While we are tending to drop the "extern" keyword for function
declarations, it is still necessary for global variables used
across multiple *.c files. The impact of not having the extern
keyword may be unpredictable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Zoli Szabó [Mon, 30 Dec 2019 15:56:59 +0000 (15:56 +0000)]
git-gui: allow opening currently selected file in default app
Many times there's the need to quickly open a source file (the one you're
looking at in Git GUI) in the predefined text editor / IDE. Of course,
the file can be searched for in your preferred file manager or directly
in the text editor, but having the option to directly open the current
file from Git GUI would be just faster. This change enables just that by:
- clicking the diff header path (which is now highlighted as a hyperlink)
- or diff header path context menu -> Open
Note: executable files will be run and not opened for editing.
Signed-off-by: Zoli Szabó <zoli.szabo@gmail.com> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Derrick Stolee [Mon, 30 Dec 2019 15:33:13 +0000 (15:33 +0000)]
sparse-checkout: document interactions with submodules
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 30 Dec 2019 15:33:12 +0000 (15:33 +0000)]
sparse-checkout: list directories in cone mode
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Mon, 30 Dec 2019 00:47:27 +0000 (08:47 +0800)]
Merge tag 'v2.25.0-rc0' into git-po-master
Git 2.25-rc0
* tag 'v2.25.0-rc0': (531 commits)
Git 2.25-rc0
sparse-checkout: improve OS ls compatibility
dir.c: use st_add3() for allocation size
dir: consolidate similar code in treat_directory()
dir: synchronize treat_leading_path() and read_directory_recursive()
dir: fix checks on common prefix directory
t4015: improve coverage of function context test
commit: forbid --pathspec-from-file --all
t3434: mark successful test as such
notes.h: fix typos in comment
t6030: don't create unused file
t5580: don't create unused file
t3501: don't create unused file
bisect--helper: convert `*_warning` char pointers to char arrays.
The sixth batch
fix-typo: consecutive-word duplications
Makefile: drop GEN_HDRS
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
...
Johannes Sixt [Sun, 22 Dec 2019 15:03:53 +0000 (16:03 +0100)]
t3008: find test-tool through path lookup
Do not use $GIT_BUILD_DIR without quotes; it may contain spaces and be
split into fields. But it is not necessary to access test-tool with an
absolute path in the first place as it can be found via path lookup.
Remove the explicit path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Thu, 26 Dec 2019 10:42:20 +0000 (10:42 +0000)]
packfile: replace lseek+read with pread
We already have pread emulation for portability, so there's
there's no reason to make two syscalls where one suffices.
Furthermore, readers of the packfile will be using mmap
(or pread to emulate mmap), anyways, so the file description
offset does not matter in this case.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
