Philipp Zabel [Fri, 27 Jun 2025 11:45:41 +0000 (13:45 +0200)]
drm/mipi-dsi: Drop MIPI_DSI_MODE_VSYNC_FLUSH flag
Drop the unused MIPI_DSI_MODE_VSYNC_FLUSH flag. Whether or not a display
FIFO flush on vsync is required to avoid sending garbage to the panel is
not a property of the DSI link, but of the integration between display
controller and DSI host bridge.
Philipp Zabel [Fri, 27 Jun 2025 11:45:38 +0000 (13:45 +0200)]
drm/bridge: samsung-dsim: Always flush display FIFO on vsync pulse
Always flush the display FIFO on vsync pulse, even if not explicitly
requested by the panel via MIPI_DSI_MODE_VSYNC_FLUSH mode_flag.
The display FIFO should be empty at vsync. Flushing it at vsync pulses
helps to remove garbage that may have entered the FIFO during startup
(if synchronisation between upstream display controller and Samsung DSIM
is lacking) and that may persist in form of last frame's leftovers on
subsequent frames. Flushing the display FIFO if it is already empty
should have no effect.
This will allow to remove the MIPI_DSI_MODE_VSYNC_FLUSH flag, which is
only used by the Samsung DSIM bridge driver. Arguably this flag doesn't
belong in the panel configuration at all: flushing the display FIFO on
vsync is a workaround for issues with the integration between display
controller and DSI bridge, not a property of the DSI link between bridge
and panel. No panel actually has a requirement to receive garbage or old
frame content after vsync.
I wonder if host controller FIFO resets are mentioned by the MIPI DSI
specification at all. This patch is based on the assumption that the
MIPI_DSI_MODE_VSYNC_FLUSH flag only exists because the DSIM_MFLUSH_VS
bit happens to be located in the same register as the bits controlling
the DSI mode.
Steven Price [Mon, 30 Jun 2025 14:07:02 +0000 (15:07 +0100)]
drm/panthor: Wait for _READY register when powering on
panthor_gpu_block_power_on() takes a register offset (rdy_reg) for the
purpose of waiting for the power transition to complete. However, a
copy/paste error converting to use the new 64 register functions
switched it to using the pwrtrans_reg register instead. Fix the function
to use the correct register.
Fixes: 4d230aa209ed ("drm/panthor: Add 64-bit and poll register accessors") Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/r/20250630140704.432409-1-steven.price@arm.com
Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC
flags. Those are used by various bridges(e.g. dw-mipi-dsi) in the
pipeline to correctly configure its sync signals polarity.
Andy Yan [Mon, 16 Jun 2025 07:05:17 +0000 (15:05 +0800)]
drivers/panel: raydium-rm67200: Make reset-gpio optional
Although the datasheet of the panel module describes that it has a
reset pin, in the actual hardware design, we often use an RC circuit
to control the reset, and rarely use GPIO to control the reset. This
is the way it is done on our numerous development boards (such as
RK3568/RK3576 EVB).
Andy Yan [Mon, 16 Jun 2025 07:05:16 +0000 (15:05 +0800)]
dt-bindings: display: panel: Make reset-gpio as optional for Raydium RM67200
Although the datasheet of the panel module describes that it has a
reset pin, in the actual hardware design, we often use an RC circuit
to control the reset, and rarely use GPIO to control the reset. This
is the way it is done on our numerous development boards (such as RK3568,
RK3576 EVB).
So make the reset-gpio optional.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250616070536.670519-1-andyshrk@163.com
Philipp Stanner [Thu, 5 Jun 2025 13:41:55 +0000 (15:41 +0200)]
drm/sched/tests: Make timedout_job callback a better role model
Since the drm_mock_scheduler does not have real users in userspace, nor
does it have real hardware or firmware rings, it's not necessary to
signal timedout fences nor free jobs - from a functional standpoint.
Still, the dma_fence framework establishes the hard rule that all fences
must always get signaled.
The unit tests, moreover, should as much as possible represent the
intended usage of the scheduler API.
Furthermore, this later enables simplifying the mock scheduler's
teardown code path.
Make sure timed out hardware fences get signaled with the appropriate
error code.
Suraj Kandpal [Fri, 20 Jun 2025 06:34:45 +0000 (12:04 +0530)]
drm/i915/backlight: Use drm_edp_backlight_enable
Use drm dp helper to enable backlight now that it has been modified
to set PANEL_LUMINANCE_CONTROL_ENABLE bit based on if capability
supports it and the driver wants it. Remove the dead code.
Suraj Kandpal [Fri, 20 Jun 2025 06:34:41 +0000 (12:04 +0530)]
drm/dp: Change argument type of drm_edp_backlight_enable
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
Suraj Kandpal [Fri, 20 Jun 2025 06:34:40 +0000 (12:04 +0530)]
drm/dp: Modify drm_edp_backlight_set_level
Modify drm_edp_backlight_set_level to be able to set the value
for register in DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We multiply
the level with 1000 since we get the value in Nits and the
register accepts it in milliNits.
Suraj Kandpal [Fri, 20 Jun 2025 06:34:38 +0000 (12:04 +0530)]
drm/dp: Modify drm_edp_probe_state
Modify drm_edp_probe_state to read current level from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We divide it by
1000 since the value in this register is in millinits.
Suraj Kandpal [Fri, 20 Jun 2025 06:34:36 +0000 (12:04 +0530)]
drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
dt-bindings: display: vop2: Add optional PLL clock property for rk3576
As with the RK3588 SoC, RK3576 also allows the use of HDMI PHY PLL as an
alternative and more accurate pixel clock source for VOP2.
Document the optional PLL clock property.
Moreover, given that this is part of a series intended to address some
recent display problems, provide the appropriate tags to facilitate
backporting.
MAINTAINERS: Add missing sysfb files to firmware framebuffers entry
The commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") moved the sysfb*.c source files from arch/x86
to drivers/firmware, because the logic wasn't x86 specific and could
be used by other architectures.
But the drivers/firmware path is not listed in MAINTAINERS, which led
to the files being orphaned and scripts/get_maintainer.pl not listing
a mailing list to Cc anymore.
Now that we have an entry for all the firmware-provided framebuffer code,
add the missing sysfb files to make sure correct folks and list is Cc'ed.
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/lkml/aF53djlieUNF_-aV@smile.fi.intel.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250627113328.2703491-1-javierm@redhat.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Jacopo Mondi [Mon, 26 Feb 2024 13:25:43 +0000 (14:25 +0100)]
drm/fourcc: Add RGB161616 and BGR161616 formats
Add FourCC definitions for the 48-bit RGB/BGR formats to the
DRM/KMS uapi.
The format will be used by the Raspberry Pi PiSP Back End,
supported by a V4L2 driver in kernel space and by libcamera in
userspace, which uses the DRM FourCC identifiers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Link: https://lore.kernel.org/r/20240226132544.82817-1-jacopo.mondi@ideasonboard.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
drm/format-helper: Split off byte swapping from drm_fb_xrgb8888_to_rgb565()
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Rob Clark [Wed, 25 Jun 2025 17:37:11 +0000 (10:37 -0700)]
drm/fourcc: Add 32b float formats
Add 1, 2, 3, and 4 component 32b float formats, so that buffers with
these formats can be imported/exported with fourcc+modifier, and/or
created by gbm.
These correspond to PIPE_FORMAT_{R32,R32G32,R32G32B32,R32G32B32A32}_FLOAT
in mesa.
Rob Clark [Wed, 25 Jun 2025 17:37:10 +0000 (10:37 -0700)]
drm/fourcc: Add missing half-float formats
Not something that is likely to be scanned out, but GPUs usually support
half-float formats with 1, 2, or possibly 3 components, and it is useful
to be able to import/export them with a valid fourcc, and/or use gbm to
create them.
These correspond to PIPE_FORMAT_{R16,R16G16,R16G16B16}_FLOAT in mesa.
Thomas Hellström [Mon, 23 Jun 2025 15:53:13 +0000 (17:53 +0200)]
drm/ttm, drm_xe, Implement ttm_lru_walk_for_evict() using the guarded LRU iteration
To avoid duplicating the tricky bo locking implementation,
Implement ttm_lru_walk_for_evict() using the guarded bo LRU iteration.
To facilitate this, support ticketlocking from the guarded bo LRU
iteration.
v2:
- Clean up some static function interfaces (Christian König)
- Fix Handling -EALREADY from ticketlocking in the loop by
skipping to the next item. (Intel CI)
Thomas Hellström [Mon, 23 Jun 2025 15:53:12 +0000 (17:53 +0200)]
drm/ttm, drm/xe: Modify the struct ttm_bo_lru_walk_cursor initialization
Instead of the struct ttm_operation_ctx, Pass a struct ttm_lru_walk_arg
to enable us to easily extend the walk functionality, and to
implement ttm_lru_walk_for_evict() using the guarded LRU iteration.
drm/bridge: ti-sn65dsi86: remove unnecessary GPIO line direction check
As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input
lines"), the GPIO core makes sure values cannot be set on input lines.
Remove the unnecessary check.
Luca Ceresoli [Fri, 20 Jun 2025 15:59:55 +0000 (17:59 +0200)]
drm/bridge: add warning for bridges not using devm_drm_bridge_alloc()
To the best of my knowledge, all drivers in the mainline kernel adding a
DRM bridge are now converted to using devm_drm_bridge_alloc() for
allocation and initialization. Among others this ensures initialization of
the bridge refcount, allowing dynamic allocation lifetime.
devm_drm_bridge_alloc() is now mandatory for all new bridges. Code using
the old pattern ([devm_]kzalloc + filling the struct fields +
drm_bridge_add) is not allowed anymore.
Any drivers that might have been missed during the conversion, patches in
flight towards mainline and out-of-tre drivers still using the old pattern
will already be caught by a warning looking like:
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 2 PID: 83 at lib/refcount.c:25 refcount_warn_saturate+0x120/0x148
[...]
Call trace:
refcount_warn_saturate+0x120/0x148 (P)
drm_bridge_get.part.0+0x70/0x98 [drm]
drm_bridge_add+0x34/0x108 [drm]
sn65dsi83_probe+0x200/0x480 [ti_sn65dsi83]
[...]
This warning comes from the refcount code and happens because
drm_bridge_add() is increasing the refcount, which is uninitialized and
thus initially zero.
Having a warning and the corresponding stack trace is surely useful, but
the warning text does not clarify the root problem nor how to fix it.
Add a DRM_WARN() just before increasing the refcount, so the log will be
much more readable:
[drm] DRM bridge corrupted or not allocated by devm_drm_bridge_alloc()
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
[...etc...]
A DRM_WARN is used because drm_warn and drm_WARN require a struct
drm_device pointer which is not yet available when adding a bridge.
Do not print the dev_name() in the warning because struct drm_bridge has no
pointer to the struct device. The affected driver should be easy to catch
based on the following stack trace however.
Aradhya Bhatia [Wed, 28 May 2025 12:25:44 +0000 (17:55 +0530)]
drm/tidss: Add OLDI bridge support
The AM62x and AM62Px SoCs feature 2 OLDI TXes each, which makes it
possible to connect them in dual-link or cloned single-link OLDI display
modes. The current OLDI support in tidss_dispc.c can only support for
a single OLDI TX, connected to a VP and doesn't really support
configuration of OLDIs in the other modes. The current OLDI support in
tidss_dispc.c also works on the principle that the OLDI output can only
be served by one, and only one, DSS video-port. This isn't the case in
the AM62Px SoC, where there are 2 DSS controllers present that share the
OLDI TXes.
Having their own devicetree and their own bridge entity will help
support the various display modes and sharing possiblilities of the OLDI
hardware.
For all these reasons, add support for the OLDI TXes as DRM bridges.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Tested-by: Michael Walle <mwalle@kernel.org> # on am67a Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250528122544.817829-5-aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Aradhya Bhatia [Wed, 28 May 2025 12:25:43 +0000 (17:55 +0530)]
drm/tidss: Mark AM65x OLDI code separately
The dss dt schema and the tidss driver have kept the single-link OLDI in
AM65x integrated with the parent video-port (VP) from DSS (as the OLDI
configuration happens from the source VP only).
To help configure the dual-lvds modes that the OLDI has to offer in
devices AM62x and later, a new OLDI bridge driver will be introduced.
Mark the existing OLDI code separately by renaming all the current OLDI
identifiers with the 'AM65X_' prefix in tidss driver, to help
distinguish from the upcoming OLDI bridge driver.
Aradhya Bhatia [Wed, 28 May 2025 12:25:42 +0000 (17:55 +0530)]
dt-bindings: display: ti: Add schema for AM625 OLDI Transmitter
The OLDI transmitters (TXes) do not have registers of their own, and are
dependent on the source video-ports (VPs) from the DSS to provide
configuration data. This hardware doesn't directly sit on the internal
bus of the SoC, but does so via the DSS. Hence, the OLDI TXes are
supposed to be child nodes under the DSS, and not independent devices.
Two of the OLDI TXes can function in tandem to output dual-link OLDI
output, or cloned single-link outputs. In these cases, one OLDI will be
the primary OLDI, and the other one, a companion. The following diagram
represents such a configuration.
The DSS in AM625 SoC has a configuration like the one above. The AM625
DSS VP1 (port@0) can connect and control 2 OLDI TXes, to use them in
dual-link or cloned single-link OLDI modes. It is only the VP1 that can
connect to either OLDI TXes for the AM625 DSS, and not the VP2.
Alternatively, on some future TI SoCs, along with the above
configuration, the OLDI TX can _also_ connect to separate video sources,
making them work entirely independent of each other. In this case,
neither of the OLDIs are "companion" or "secondary" OLDIs, and nor do
they require one. They both are independent and primary OLDIs. The
following diagram represents such a configuration.
Note that depending on the mux configuration, the OLDIs can either be
working together in tandem - sourced by VP1, OR, they could be working
independently sourced by VP1 and VP3 respectively.
The idea is to support all the configurations with this OLDI TX schema.
The OLDI functionality is further supported by a system-control module,
which contains a few registers to control OLDI IO power and other
electrical characteristics of the IO lanes.
Add devicetree binding schema for the OLDI TXes to support various
configurations, and extend their support to the AM625 DSS.
Vignesh Raman [Mon, 23 Jun 2025 08:50:27 +0000 (14:20 +0530)]
drm/ci: Add jobs to validate devicetrees
Add jobs to run dt_binding_check and dtbs_check. If warnings are seen,
exit with a non-zero error code while configuring them as warning in
the GitLab CI pipeline.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Helen Koike <helen.fornazier@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250623085033.39680-2-vignesh.raman@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a new gpu node in mt8370.dtsi to enable support for the
ARM Mali G57 MC2 GPU (Valhall-JM) found on the MT8370 SoC, using the
Panfrost driver.
On a Mediatek Genio 510 EVK board, the panfrost driver probed with the
following message:
```
panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, issues: 00000003, 80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x5 l2_present=0x1
[drm] Initialized panfrost 1.3.0 for 13000000.gpu on minor 0
```
drm/panfrost: Add support for Mali on the MT8370 SoC
Add a compatible for the MediaTek MT8370 SoC, with an integrated ARM
Mali G57 MC2 GPU (Valhall-JM, dual core), with new platform data for
its support in the panfrost driver.
It uses the same data as MT8186 for the power management features to
describe power supplies, pm_domains and enablement (one regulator, two
power domains) but also sets the FORCE_AARCH64_PGTABLE flag in the GPU
configuration quirks bitfield to enable AARCH64 4K page table format
mode.
As MT8186 and MT8370 SoC have different GPU architecture (Mali G52 2EE
MC2 for MT8186), making them not compatible, and this mode is only
enabled for Mediatek SoC that are Mali G57 based (compatible with
mediatek,mali-mt8188 or mediatek,mali-8192), having specific platform
data allows to set this flag for MT8370 without modifying MT8186
configuration and behaviour.
Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-4-2833888cb1d3@collabora.com
drm/panfrost: Commonize Mediatek power domain array definitions
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses several different power domains arrays according to
GPU core number present in the SoC:
- mediatek_mt8186_pm_domains (2 cores)
- mediatek_mt8183_pm_domains (3 cores)
- mediatek_mt8192_pm_domains (5 cores)
As they all are fixed arrays, starting with the same entries and the
platform data also has a power domains array length field
(num_pm_domains), they can be replaced by a single array, containing
all entries, if the num_pm_domains field of the platform data is also
set to the matching core number.
So, create a generic power domain array (mediatek_pm_domains) and use
it in the mt8183(b), mt8186, mt8188 and mt8192 platform data instead.
drm/panfrost: Drop duplicated Mediatek supplies arrays
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses custom supplies array definitions
(mediatek_mt8192_supplies, mediatek_mt8183_b_supplies), that are the
same as default_supplies (used by default platform data).
So drop these duplicated definitions and use default_supplies instead.
Also, rename mediatek_mt8183_supplies to a more generic name too
(legacy_supplies).
dt-bindings: gpu: mali-bifrost: Add compatible for MT8370 SoC
Add a compatible for the MediaTek MT8370 SoC, with an
integrated ARM Mali G57 MC2 GPU (Valhall-JM, dual core).
None of the already existing SoC specific compatibles is usable as
fallback, as those either do not match the number of cores (and number
of power domains), or are for a different GPU architecture.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-1-2833888cb1d3@collabora.com
Luca Ceresoli [Wed, 28 May 2025 09:29:36 +0000 (11:29 +0200)]
drm/bridge: tc358767: convert to devm_drm_bridge_alloc() API
This is the new API for allocating DRM bridges.
Converting this driver is a bit complex because the drm_bridge funcs
pointer differs based on the bridge mode. So the current code does:
* tc_probe()
* devm_kzalloc() private struct embedding drm_bridge
* call tc_probe_bridge_endpoint() which
* parses DT description into struct fields
* computes the mode
* calls different bridge init functions based on the mode
* each sets a different bridge.funcs pointer
The new API expects the funcs pointer to be known at alloc time, which does
not fit in the current code structure.
Solve this by splitting tc_probe_bridge_endpoint() in two functions:
* tc_probe_get_mode(), computing the mode without needing the private
driver structure
* tc_probe_bridge_endpoint(), only initializing the endpoints
So now the mode is known before allocation and so
is the funcs pointer, while all other operations are still happening after
allocation, directly into the private struct data, as they used to.
The new code flow is:
* tc_probe()
* tc_probe_get_mode()
* parses DT description
* computes and returns the mode
* based onf the mode, pick the funcs pointer
* devm_drm_bridfge_alloc(..., funcs)
* call tc_probe_bridge_endpoint() which
* calls different bridge init functions based on the mode
* these don't set the funcs pointer, it was done by _alloc
This solution is chosen to minimize the changes in the driver logical code
flow. The drawback is we now iterate twice over the endpoints during probe.
drm/format-helper: Move drm_fb_build_fourcc_list() to sysfb helpers
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
drm/tests: Test drm_fb_build_fourcc_list() in separate test suite
Only sysfb drivers use drm_fb_build_fourcc_list(). The helper will
be moved from format helpers to sysfb helpers. Moving the related
tests to their own test suite.
v3:
- rename tests according to filename (José)
v2:
- rename filename to match tested code (Maxime)
drm/tests: Do not use drm_fb_blit() in format-helper tests
Export additional helpers from the format-helper library and open-code
drm_fb_blit() in tests. Prepares for the removal of drm_fb_blit(). Only
sysfb drivers use drm_fb_blit(). The function will soon be removed from
format helpers and be refactored within sysfb helpers.
Ian Forbes [Tue, 29 Apr 2025 20:34:27 +0000 (15:34 -0500)]
drm/vmwgfx: Fix Host-Backed userspace on Guest-Backed kernel
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com
Ian Forbes [Fri, 30 May 2025 18:35:09 +0000 (13:35 -0500)]
drm/vmwgfx: Implement dma_fence_ops properly
vmwgfx's fencing predates dma_fence and as a result dma_fence_ops was never
properly implemented, especially with respect to enabling signaling.
Because of this dma_fence callbacks don't work properly. This change
implements enable_signaling properly so that dma_fence callbacks now
work as expected.
It also removes vmwgfx's custom implementation of fence callbacks
and removes vmwgfx's custom dma_fence_ops::wait function which is no
longer necessary now that enable_signaling works.
Ian Forbes [Fri, 30 May 2025 18:35:08 +0000 (13:35 -0500)]
drm/vmwgfx: Update last_read_seqno under the fence lock
There was a possible race in vmw_update_seqno. Because of this race it
was possible for last_read_seqno to go backwards. Remove this function
and replace it with vmw_update_fences which now sets and returns the
last_read_seqno while holding the fence lock. This serialization via the
fence lock ensures that last_read_seqno is monotonic again.
André Almeida [Tue, 17 Jun 2025 12:49:49 +0000 (09:49 -0300)]
drm/amdgpu: Make use of drm_wedge_task_info
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
André Almeida [Tue, 17 Jun 2025 12:49:47 +0000 (09:49 -0300)]
drm/doc: Add a section about "Task information" for the wedge API
Add a section about "Task information" for the wedge API.
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-5-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
André Almeida [Tue, 17 Jun 2025 12:49:46 +0000 (09:49 -0300)]
drm: Create a task info option for wedge events
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
accel/ivpu: Add turbo flag to the DRM_IVPU_CMDQ_CREATE ioctl
Introduce a new parameter to the DRM_IVPU_CMDQ_CREATE ioctl,
enabling turbo mode for jobs submitted via the command queue.
Turbo mode allows jobs to run at higher frequencies,
potentially improving performance for demanding workloads.
Also adds the IVPU_TEST_MODE_TURBO_DISABLE flag to allow test
mode to explicitly disable turbo mode requested by the application.
The IVPU_TEST_MODE_TURBO mode has been renamed to
IVPU_TEST_MODE_TURBO_ENABLE for clarity and consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250605162001.1237789-1-maciej.falkowski@linux.intel.com
Add support for Wildcat Lake (WCL) CPUs.
Wildcat Lake contains NPU5 just like Panther Lake
hence the initial support is very simple and adds
only PCI IDs.
video: Make global edid_info depend on CONFIG_FIRMWARE_EDID
Protect global edid_info behind CONFIG_FIRMWARE_EDID and remove
the config tests for CONFIG_X86. Makes edid_info available iff
its option has been enabled.
video: Make CONFIG_FIRMWARE_EDID generally available
DRM drivers such as efidrm and vesadrm can export firmware EDID
data to userspace. Make the related option CONFIG_FIRMWARE_EDID
available without CONFIG_FB. Make it depend on X86, which is
currently the only architecture providing EDID information.
drivers/video/fbdev/via/via-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/via/via_i2c.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sis/sis_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used outside of their module. Some of
the symbols are not used anywhere, so remove the functions entirely.
Also remove the related, but unused, define SISFB_HAVE_MALLOC_NEW.
drivers/video/fbdev/omap2/omapfb/dss/dpi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/sdi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/apply.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/display.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/output.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/overlay.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/venc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/vrfb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcd_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcdc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/omapfb_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/g450_pll.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_DAC1064.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_Ti3026.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_accel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_base.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_g450.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_misc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_iplan2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_planar.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbcopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_ddc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_defio.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_io_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_sys_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcmap.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbmon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/modedb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/svgalib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/syscopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/macmodes.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sbuslib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/wmt_ge_rops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_mock_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_agp_backend.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_backup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_vm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_device.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_execbuf_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_pool.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_range_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_resource.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_tt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-10-tzimmermann@suse.de
drivers/gpu/drm/scheduler/sched_entity.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_fence.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-9-tzimmermann@suse.de
drivers/gpu/drm/drm_panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_backlight_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_orientation_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-8-tzimmermann@suse.de
drivers/gpu/drm/drm_gem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_framebuffer_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_ttm_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_vram_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-7-tzimmermann@suse.de
drivers/gpu/drm/display/drm_bridge_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_aux_bus.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_cec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_mst_topology.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_tunnel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dsc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_audio_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_notifier_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_scdc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-6-tzimmermann@suse.de
drivers/gpu/drm/clients/drm_client_setup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_event.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_modeset.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_shmem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_ttm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-5-tzimmermann@suse.de
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
drivers/gpu/drm/drm_atomic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_uapi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_auth.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_buddy.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_color_mgmt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_damage_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_debugfs_crc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_drv.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_edid.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_exec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_dma_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_file.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_flip_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_format_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpusvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpuvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_managed.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dbi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mode_config.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_lock.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_print.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_privacy_screen.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_self_refresh_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_simple_kms_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_suballoc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_syncobj.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vblank_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vma_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_writeback.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/lib/drm_random.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/tests/drm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-3-tzimmermann@suse.de
projects / thirdparty / linux.git / log
