* configure.in: Set libtool_enable_shared rather than
libtool_shared. Remove diversion hack.
* configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
* configure.in: Set libtool_enable_shared rather than
libtool_shared. Remove diversion hack.
* configure, Makefile.in, doc/Makefile.in, aclocal.m4: Rebuild
with new libtool.
* peicode.h (pe_print_idata): Check for import of ordinal rather
than name.
(pe_print_edata): If there is no .edata section, look for the
export data in some other section.
Doug Evans [Wed, 4 Feb 1998 01:16:11 +0000 (01:16 +0000)]
* cgen.h (CGEN_INSN_MAX_ATTRS): Renamed from CGEN_MAX_INSN_ATTRS.
(CGEN_HW_ENTRY): Move `next' entry to end of struct.
(CGEN_KEYWORD_MAX_ATTRS): Renamed from CGEN_MAX_KEYWORD_ATTRS.
(CGEN_OPERAND_MAX_ATTRS): Renamed from CGEN_MAX_OPERAND_ATTRS.
Tue Feb 3 14:25:25 1998 Brent Baccala <baccala@freesoft.org>
* symtab.c (symtab_finalize): Prefer function symbols over line
symbols.
(dbg_sym_lookup): Correct debugging messages.
* gprof.c (main): --sum implies --line.
* cg_print.c (cg_print): When doing line by line profiling, don't
use a non-function as a main listing item.
* call_graph.c (cg_tally): When using line by line profiling, use
the function symbol as the child.
* symtab.h (NBBS): Define.
(Sym): Add bb_addr and bb_calls fields.
* basic_blocks.c (bb_read_rec): Save multiple basic blocks per
symbol.
(bb_write_blocks): Adjust for multiple basic blocks per symbol.
(print_exec_counts): Don't check whether a symbol is the start of
a basic block. Print all basic blocks for a symbol.
(annotate_with_count): Rewrite to print all basic block counts and
to pay attention to width argument.
(print_annotated_source): Don't check whether symbol is the start
of a basic block.
Tue Feb 3 14:25:25 1998 Brent Baccala <baccala@freesoft.org>
Make it possible to build a cross gprof, although a few cases are
still not handled:
* configure.in: Don't set MY_TARGET.
* gprof.h: Don't include MACHINE_H. Don't define FOPEN_RB or
FOPEN_WB; just get them from sysdep.h.
* core.h (min_insn_size, offset_to_code): Declare.
* core.c (MIN_INSN_SIZE): Don't define.
(min_insn_size, offset_to_code): New variables.
(core_init): Initialize min_insn_size and offset_to_code.
(find_call): New function.
(core_create_line_syms): Don't use min_dist. Set is_static in
pass 2.
* hist.c (UNITS_TO_CODE): Define.
* gprof.c (default_excluded_list): Add "__mcount_internal".
* gmon.h: Change TARGET_alpha to __alpha__.
* hertz.h: Ifdef MACH, define hertz as HZ.
* alpha.c (alpha_Instruction): Rename from Instruction. Change
all references.
(alpha_find_call): Rename from find_call.
* alpha.h: Remove.
* dummy.c, dummy.h: Remove.
* i386.c (i386_iscall): Rename from iscall. Change all
references. Check for call instruction, not jump or lcall.
(i386_find_call): Rename from find_call. Correct for VMA.
Correct call destination computation. Don't dereference symbol if
it is NULL.
* i386.h: Remove.
* ns532.c, ns532.h: Remove.
* sparc.c (CALL): Define.
(sparc_find_call): Rename from find_call.
* sparc.h: Remove.
* tahoe.c: Include cg_arcs.h, core.h, hist.h, and symtab.h. Don't
include time_host.h.
(CALLF, PC): Define.
(enum tahoe_opermodes, tahoe_operandenum): Define. Rename all
references to opermodes or operandenum to these.
(tahoe_operandmode): Rename from operandmode. Call abort if
switch does not return.
(tahoe_operandname): Rename from operandname. Call abort if
switch does not return.
(tahoe_operandlength): Rename from operandlength. Call abort if
switch does not return.
(tahoe_reladdr): Rename from reladdr.
(tahoe_find_call): Rename from find_call. Use core_text_space
rather than textspace.
* tahoe.h: Remove.
* vax.c (CALLS, PC): Define.
(enum opermodes, operandenum, struct modebyte): Define.
(vax_operandmode): Rename from operandmode. Call abort if switch
does not return.
(vax_operandname): Rename from operandname. Call abort if switch
does not return.
(vax_operandlength): Rename from operandlength. Call abort if
switch does not return.
(vax_reladdr): Rename from reladdr.
(vax_find_call): Rename from find_call.
* vax.h: Remove.
* Makefile.am (AUTOMAKE_OPTIONS): Set to cygnus.
(MY_TARGET): Remove.
(INCLUDES): Remove -DTARGET_$(MY_TARGET) and -DMACHINE_H=
\"$(MY_TARGET).h\".
(gprof_SOURCES): Add i386.c, alpha.c, vax.c, tahoe.c, sparc.c.
(gprof_DEPENDENCIES): Remove $(MY_TARGET).o.
(gprof_LDADD): Likewise.
(noinst_HEADERS): Remove alpha.h, i386.h, ns532.h, sparc.h,
tahoe.h, vax.h, dummy.h.
(EXTRA_DIST): Remove alpha.c, i386.c, ns532.c, sparc.c, tahoe.c,
vax.c, dummy.c.
($(OBJECTS)): Don't depend upon $(MY_TARGET).h.
($(MY_TARGET).o): Remove target.
(i386.o, alpha.o, vax.o, tahoe.o, sparc.o): New targets.
* configure, Makefile.in, aclocal.m4: Rebuild.
Andrew Cagney [Tue, 3 Feb 1998 05:39:15 +0000 (05:39 +0000)]
IGEN - Replace IMEM (IMEM_IMMED) macro with IMEM<insn-size> macro,
update v850, tic80 and mips simulators.
IGEN - Prepend prefix to more generated symbols and macros
(idecode_issue, instruction_word).
IGEN - Add -Wnowith option to supress warnings about word size
inflicts in input files.
MIPS - Clean up Makefile.in, m16.igen, m16.dc (new), m16run.c (new) so
that a mips16 simulator built using IGEN can be compiled.
Stan Shebs [Tue, 3 Feb 1998 01:21:29 +0000 (01:21 +0000)]
* gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
files, finish sorting of host vs target vs native macros, describe
some more of them.
* Makefile.am ($(srcdir)/bfd-in2.h): Add dummy command to force
make to reexamine the file timestamp.
($(srcdir)/libbfd.h, $(srcddir)/libcoff.h): Likewise.
Mon Feb 2 17:39:39 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
Mon Feb 2 12:39:05 1998 Geoff Keating <geoffk@ozemail.com.au>
* config/tc-ppc.c (md_apply_fix3): Change BFD_RELOC_HI16 and
BFD_RELOC_HI16_S to store the high bits of any value.
* config/tc-ppc.h (tc_fix_adjustable): Undo change of Fri Jun 27.
(TC_RELOC_RTSYM_LOC_FIXUP): Don't let the
assembler calculate relocations to any external symbol at all.
* config/tc-ppc.c (md_apply_fix3) [OBJ_ELF]: Correct bugs
involving generation of pc-relative relocs.
(md_pcrel_from_section) [OBJ_ELF]: The job this code used to do
has been moved to md_apply_fix3.
* config/tc-ppc.c (md_apply_fix3): Fix test for too-far branch.
(ppc_elf_suffix): Warn about 'identifier+constant@got' syntax,
which actually means (the address of identifier's GOT entry) +
constant, which is not particularly useful.
Jeff Law [Mon, 2 Feb 1998 04:43:07 +0000 (04:43 +0000)]
* gas/mips/4010.s: Pad test code out to a 16byte boundary.
* gas/mips/4010.d: Corresponding changes.
* gas/mips/4100.s: Pad test code out to a 16byte boundary.
* gas/mips/4100.d: Corresponding changes.
* gas/mips/4650.s: Pad test code out to a 16byte boundary.
* gas/mips/4650.d: Corresponding changes.
start-sanitize-r5900
* gas/mips/5900.s: Pad test code out to a 16byte boundary.
* gas/mips/5900.d: Corresponding changes.
end-sanitize-r5900
To make mips-ecoff happy, which apparently pads out the sections...
Andrew Cagney [Sat, 31 Jan 1998 06:23:41 +0000 (06:23 +0000)]
igen: Fix SMP simulator generator support.
Use the bfd-processor name in the sim-engine switch.
Add nr_cpus argument to sim_engine_run.
tic80, v850, d30v, mips, common:
Update
mips: Fill in bfd-processor field of model records so that
they match ../bfd/archures.
Geoffrey Noer [Sat, 31 Jan 1998 01:23:12 +0000 (01:23 +0000)]
Fri Jan 30 17:18:32 1998 Geoffrey Noer <noer@cygnus.com>
* configure.in: Remove expect from noconfigdirs when target
is cygwin32. OK to build expect and dejagnu with Canadian
Cross.
Doug Evans [Sat, 31 Jan 1998 00:11:35 +0000 (00:11 +0000)]
* elf32-mips.c (elf_mips_dvp_11_pcrel_howto): Set pcrel_offset=true
and partial_inplace=false.
(mips_elf_relocate_section): Recognize R_MIPS_DVP_11_PCREL.
Ian Lance Taylor [Sat, 31 Jan 1998 00:11:33 +0000 (00:11 +0000)]
Fri Jan 30 19:07:07 1998 Geoff Keating <geoffk@ozemail.com.au>
* elf32-ppc.c (ppc_elf_create_dynamic_sections): New procedure
to create .dynsbss and .rela.sbss sections.
(ppc_elf_adjust_dynamic_symbol): Put space for small data to be
copied from dynamic objects into .sbss.
(ppc_elf_size_dynamic_sections): Strip .rela.sbss if we don't
use it. Correct typo of .rela.sdata2.
(ppc_elf_finish_dynamic_symbol): Generate reloc to where we
put the data, which may now be in .sbss.
(ppc_elf_relocate_section): A SDAREL16 reloc can be in dynsbss.
(elf_backend_create_dynamic_sections): Define as
ppc_elf_create_dynamic_sections.
* elf32-ppc.c (ppc_elf_check_relocs): Don't emit R_PPC_REL* relocs
against _GLOBAL_OFFSET_TABLE_.
(ppc_elf_relocate_section): Don't emit R_PPC_REL32 relocs in
shared libraries which refer to local symbols. Make sure that the
test for allocating space for a reloc in a shared object is the
same as the test for emitting a reloc.
Ian Carmichael [Fri, 30 Jan 1998 22:42:04 +0000 (22:42 +0000)]
* dvp-opc.c, a bunch of little change to the instruction table to make
* it consistent with the SCE asmvu assembler (and inconsistent with the
* spec).
David Taylor [Fri, 30 Jan 1998 20:33:43 +0000 (20:33 +0000)]
Changes by Peter.Schauer to fix gdb/13521 -- gdb step command fails to step
from a function in one dynamically linked library into a function in another
dynamically linked library.
Ian Lance Taylor [Thu, 29 Jan 1998 21:31:11 +0000 (21:31 +0000)]
Thu Jan 29 16:24:04 1998 Mumit Khan <khan@xraylith.wisc.edu>
* dlltool.c: Define exit status macros for _WIN32 but not
__CYGWIN32__.
(gen_lib_file): Check for exit status of unlink.
* resrc.c: Define popen and pclose if _WIN32 but not
__CYGWIN32__.
Ian Lance Taylor [Thu, 29 Jan 1998 21:11:10 +0000 (21:11 +0000)]
Thu Jan 29 16:04:21 1998 Mumit Khan <khan@xraylith.wisc.edu>
* ldfile.c (slash): Set to backslash if _WIN32 but not
__CYGWIN32__.
(ldfile_open_file_search): If __MSDOS__ or _WIN32, accept a
leading backslash or a leading x: as an absolute path.
(ldfile_find_command_file): Use slash rather than / when
generating name to try.
* lexsup.c (PATH_SEPARATOR): Define.
(set_default_dirlist): Use PATH_SEPARATOR rather than ':'.
Doug Evans [Thu, 29 Jan 1998 21:03:41 +0000 (21:03 +0000)]
* Makefile.in (M32RX_OBJS): Comment out until m32rx port working.
* arch.h (HAVE_CPU_M32R{,X}): Delete, moved to m32r-opc.h.
* arch.c (machs): Check ifdef HAVE_CPU_FOO for each entry.
Ian Lance Taylor [Thu, 29 Jan 1998 20:58:49 +0000 (20:58 +0000)]
Thu Jan 29 15:55:35 1998 J.J. van der Heijden <J.J.vanderHeijden@student.utwente.nl>
* config.bfd (i[3456]-*-mingw32*): New target.
* acinclude.m4 (BFD_BINARY_OPEN): Check for mingw32.
* aclocal.m4, configure: Rebuild.
Ian Lance Taylor [Thu, 29 Jan 1998 19:48:18 +0000 (19:48 +0000)]
Thu Jan 29 14:42:44 1998 Pat Rankin <rankin@eql.caltech.edu>
* Makefile.am (CONFIG_OBJS): New variable, containing part of old
OBJS variable.
(GENERIC_OBJS): New variable, with the rest of the old OBJS
variable.
(OBJS): Now just $(CONFIG_OBJS) and $(GENERIC_OBJS).
($(srcdir)/make-gas.com): Rename from make-gas.com.
(stamp-mk.com): Replace $(OBJS) with $(GENERIC_OBJS).
(EXTRA_DIST): Define.
* vmsconf.sh: Handle {targ-cpu, obj-format, atof-targ} modules
explicitly rather than via the list of object files.
(gcc-as.opt): New file created when make-gas.com is run.
* config-gas.com: Create {targ-cpu.h, obj-format.h, targ-env.h,
itbl-cpu.h} to #include appropriate file rather than copying that
file.
* config/vms-conf.h: Synchronize with current config.in.
* Makefile.in: Rebuild.
projects / thirdparty / binutils-gdb.git / log
