ebotcazou [Wed, 9 Jan 2019 14:34:20 +0000 (14:34 +0000)]
PR target/84010
* config/sparc/sparc.c (sparc_legitimize_tls_address): Only use Pmode
consistently in TLS address generation and adjust code to the renaming
of patterns. Mark calls to __tls_get_addr as const.
* config/sparc/sparc.md (tgd_hi22): Turn into...
(tgd_hi22<P:mode>): ...this and use Pmode throughout.
(tgd_lo10): Turn into...
(tgd_lo10<P:mode>): ...this and use Pmode throughout.
(tgd_add32): Merge into...
(tgd_add64): Likewise.
(tgd_add<P:mode>): ...this and use Pmode throughout.
(tldm_hi22): Turn into...
(tldm_hi22<P:mode>): ...this and use Pmode throughout.
(tldm_lo10): Turn into...
(tldm_lo10<P:mode>): ...this and use Pmode throughout.
(tldm_add32): Merge into...
(tldm_add64): Likewise.
(tldm_add<P:mode>): ...this and use Pmode throughout.
(tldm_call32): Merge into...
(tldm_call64): Likewise.
(tldm_call<P:mode>): ...this and use Pmode throughout.
(tldo_hix22): Turn into...
(tldo_hix22<P:mode>): ...this and use Pmode throughout.
(tldo_lox10): Turn into...
(tldo_lox10<P:mode>): ...this and use Pmode throughout.
(tldo_add32): Merge into...
(tldo_add64): Likewise.
(tldo_add<P:mode>): ...this and use Pmode throughout.
(tie_hi22): Turn into...
(tie_hi22<P:mode>): ...this and use Pmode throughout.
(tie_lo10): Turn into...
(tie_lo10<P:mode>): ...this and use Pmode throughout.
(tie_ld64): Use DImode throughout.
(tie_add32): Merge into...
(tie_add64): Likewise.
(tie_add<P:mode>): ...this and use Pmode throughout.
(tle_hix22_sp32): Merge into...
(tle_hix22_sp64): Likewise.
(tle_hix22<P:mode>): ...this and use Pmode throughout.
(tle_lox22_sp32): Merge into...
(tle_lox22_sp64): Likewise.
(tle_lox22<P:mode>): ...this and use Pmode throughout.
(*tldo_ldub_sp32): Merge into...
(*tldo_ldub_sp64): Likewise.
(*tldo_ldub<P:mode>): ...this and use Pmode throughout.
(*tldo_ldub1_sp32): Merge into...
(*tldo_ldub1_sp64): Likewise.
(*tldo_ldub1<P:mode>): ...this and use Pmode throughout.
(*tldo_ldub2_sp32): Merge into...
(*tldo_ldub2_sp64): Likewise.
(*tldo_ldub2<P:mode>): ...this and use Pmode throughout.
(*tldo_ldsb1_sp32): Merge into...
(*tldo_ldsb1_sp64): Likewise.
(*tldo_ldsb1<P:mode>): ...this and use Pmode throughout.
(*tldo_ldsb2_sp32): Merge into...
(*tldo_ldsb2_sp64): Likewise.
(*tldo_ldsb2<P:mode>): ...this and use Pmode throughout.
(*tldo_ldub3_sp64): Use DImode throughout.
(*tldo_ldsb3_sp64): Likewise.
(*tldo_lduh_sp32): Merge into...
(*tldo_lduh_sp64): Likewise.
(*tldo_lduh<P:mode>): ...this and use Pmode throughout.
(*tldo_lduh1_sp32): Merge into...
(*tldo_lduh1_sp64): Likewise.
(*tldo_lduh1<P:mode>): ...this and use Pmode throughout.
(*tldo_ldsh1_sp32): Merge into...
(*tldo_ldsh1_sp64): Likewise.
(*tldo_ldsh1<P:mode>): ...this and use Pmode throughout.
(*tldo_lduh2_sp64): Use DImode throughout.
(*tldo_ldsh2_sp64): Likewise.
(*tldo_lduw_sp32): Merge into...
(*tldo_lduw_sp64): Likewise.
(*tldo_lduw<P:mode>): ...this and use Pmode throughout.
(*tldo_lduw1_sp64): Use DImode throughout.
(*tldo_ldsw1_sp64): Likewise.
(*tldo_ldx_sp64): Likewise.
(*tldo_stb_sp32): Merge into...
(*tldo_stb_sp64): Likewise.
(*tldo_stb<P:mode>): ...this and use Pmode throughout.
(*tldo_sth_sp32): Merge into...
(*tldo_sth_sp64): Likewise.
(*tldo_sth<P:mode>): ...this and use Pmode throughout.
(*tldo_stw_sp32): Merge into...
(*tldo_stw_sp64): Likewise.
(*tldo_stw<P:mode>): ...this and use Pmode throughout.
(*tldo_stx_sp64): Use DImode throughout.
sudi [Wed, 9 Jan 2019 14:32:06 +0000 (14:32 +0000)]
[AArch64, 6/6] Enable BTI: Add configure option.
This patch is part of a series that enables ARMv8.5-A in GCC and
adds Branch Target Identification Mechanism.
This patch is adding a new configure option for enabling BTI and
Return Address Signing by default.
*** gcc/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64.c (aarch64_override_options): Add case to
check configure option to set BTI and Return Address Signing.
* configure.ac: Add --enable-standard-branch-protection and
--disable-standard-branch-protection.
* configure: Regenerated.
* doc/install.texi: Document the same.
*** gcc/testsuite/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* gcc.target/aarch64/bti-1.c: Update test to not add command line
option when configure with bti.
* gcc.target/aarch64/bti-2.c: Likewise.
* lib/target-supports.exp
(check_effective_target_default_branch_protection):
Add configure check for --enable-standard-branch-protection.
sudi [Wed, 9 Jan 2019 14:21:22 +0000 (14:21 +0000)]
[AArch64, 5/6] Enable BTI : Add new pass for BTI.
This patch is part of a series that enables ARMv8.5-A in GCC and
adds Branch Target Identification Mechanism.
This patch adds a new pass called "bti" which is triggered by the command
line argument -mbranch-protection whenever "bti" is turned on.
The pass iterates through the instructions and adds appropriated BTI
instructions based on the following:
* Add a new "BTI C" at the beginning of a function, unless its already
protected by a "PACIASP". We exempt the functions that are only called
directly.
* Add a new "BTI J" for every target of an indirect jump, jump table
targets, non-local goto targets or labels that might be referenced by
variables, constant pools, etc (NOTE_INSN_DELETED_LABEL).
Since we have already changed the use of indirect tail calls to only x16 and
x17, we do not have to use "BTI JC".
(check patch 3/6).
*** gcc/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* config.gcc (aarch64*-*-*): Add aarch64-bti-insert.o.
* gcc/config/aarch64/aarch64.h: Update comment for TRAMPOLINE_SIZE.
* config/aarch64/aarch64.c (aarch64_asm_trampoline_template): Update
if bti is enabled.
* config/aarch64/aarch64-bti-insert.c: New file.
* config/aarch64/aarch64-passes.def (INSERT_PASS_BEFORE): Insert bti
pass.
* config/aarch64/aarch64-protos.h (make_pass_insert_bti): Declare the
new bti pass.
* config/aarch64/aarch64.md (unspecv): Add UNSPECV_BTI_NOARG,
UNSPECV_BTI_C, UNSPECV_BTI_J and UNSPECV_BTI_JC.
(bti_noarg, bti_j, bti_c, bti_jc): New define_insns.
* config/aarch64/t-aarch64: Add rule for aarch64-bti-insert.o.
*** gcc/testsuite/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* gcc.target/aarch64/bti-1.c: New test.
* gcc.target/aarch64/bti-2.c: New test.
* gcc.target/aarch64/bti-3.c: New test.
* lib/target-supports.exp
(check_effective_target_aarch64_bti_hw): Add new check for BTI hw.
sudi [Wed, 9 Jan 2019 14:14:28 +0000 (14:14 +0000)]
[AArch64, 4/6] Enable BTI: Add new <type> to -mbranch-protection.
This patch is part of a series that enables ARMv8.5-A in GCC and
adds Branch Target Identification Mechanism.
This pass updates the CLI of -mbranch-protection to add "bti" as a new
type of branch protection and also add it its definition of "none" and
"standard". The option does not really do anything functional.
The functional changes are in the next patch. I am initializing the target
variable aarch64_enable_bti to 2 since I am also adding a configure option
in a later patch and a value different from 0 and 1 would help identify if its
already been updated.
*** gcc/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_bti_enabled): Declare.
* config/aarch64/aarch64.c (aarch64_handle_no_branch_protection):
Disable bti for -mbranch-protection=none.
(aarch64_handle_standard_branch_protection): Enable bti for
-mbranch-protection=standard.
(aarch64_handle_bti_protection): Enable bti for "bti" in the string to
-mbranch-protection.
(aarch64_bti_enabled): Check if bti is enabled.
* config/aarch64/aarch64.opt: Declare target variable.
* doc/invoke.texi: Add bti to the -mbranch-protection documentation.
sudi [Wed, 9 Jan 2019 14:10:58 +0000 (14:10 +0000)]
[AArch64, 3/6] Restrict indirect tail calls to x16 and x17
This patch is part of a series that enables ARMv8.5-A in GCC and
adds Branch Target Identification Mechanism.
This patch changes the registers that are allowed for indirect tail calls.
We are choosing to restrict these to only x16 or x17.
Indirect tail calls are special in a way that they convert a call statement
(BLR instruction) to a jump statement (BR instruction). For the best possible
use of Branch Target Identification Mechanism, we would like to place a
"BTI C" (call) at the beginning of the function which is only
compatible with BLRs and BR X16/X17. In order to make indirect tail calls
compatible with this scenario, we are restricting the TAILCALL_ADDR_REGS.
In order to use x16/x17 for this purpose, we also had to change the use
of these registers in the epilogue/prologue handling. For this purpose
we are now using x12 and x13 named as EP0_REGNUM and EP1_REGNUM as
scratch registers for epilogue and prologue.
*** gcc/ChangeLog***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64.c (aarch64_expand_prologue): Use new
epilogue/prologue scratch registers EP0_REGNUM and EP1_REGNUM.
(aarch64_expand_epilogue): Likewise.
(aarch64_output_mi_thunk): Likewise
* config/aarch64/aarch64.h (REG_CLASS_CONTENTS): Change
TAILCALL_ADDR_REGS to x16 and x17.
* config/aarch64/aarch64.md: Define EP0_REGNUM and EP1_REGNUM.
*** gcc/testsuite/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* gcc.target/aarch64/test_frame_17.c: Update to check for EP0_REGNUM
instead of IP0_REGNUM and add test case.
sudi [Wed, 9 Jan 2019 14:08:01 +0000 (14:08 +0000)]
[AArch64, 2/6] Add new arch command line feaures from ARMv8.5-A
This patch is part of a series that enables ARMv8.5-A in GCC and
adds Branch Target Identification Mechanism.
This patch add all the command line feature that are added by ARMv8.5.
Optional extensions to armv8.5-a:
+rng : Random number Generation Instructions.
+memtag : Memory Tagging Extension.
ARMv8.5-A features that are optional to older arch:
+sb : Speculation barrier instruction.
+ssbs: Speculative Store Bypass Safe instruction.
+predres: Execution and Data Prediction Restriction instructions.
All of the above only effect the assembler and have already gone in the
trunk of binutils.
*** gcc/ChangeLog ***
2018-01-09 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64-option-extensions.def: Define
AARCH64_OPT_EXTENSION for memtag, rng, sb, ssbs and predres.
* gcc/config/aarch64/aarch64.h (AARCH64_FL_RNG): New.
(AARCH64_FL_MEMTAG, ARCH64_FL_SB, AARCH64_FL_SSBS): New.
(AARCH64_FL_PREDRES): New.
(AARCH64_FL_FOR_ARCH8_5): Add AARCH64_FL_SB, AARCH64_FL_SSBS and
AARCH64_FL_PREDRES by default.
* gcc/doc/invoke.texi: Document rng, memtag, sb, ssbs and predres.
* gcc.target/aarch64/sve/copysign_1.c: New test for SVE vectorized
copysign.
* gcc.target/aarch64/sve/copysign_1_run.c: Likewise.
* gcc.target/aarch64/sve/xorsign_1.c: New test for SVE vectorized
xorsign.
* gcc.target/aarch64/sve/xorsign_1_run.c: Likewise.
redi [Wed, 9 Jan 2019 10:46:52 +0000 (10:46 +0000)]
Fix failing prettyprinter test
The failure for "p2" went unnoticed due to the pre-existing failures for
variables with similar names, like "p" and "q". This fixes the failure,
and gives the filesystem::path variables better names.
* testsuite/libstdc++-prettyprinters/cxx17.cc: Fix expected output
for filesystem::path. Give variables more distinctive names.
The IBM128 long double format isn't foldable in constant expressions, so
conditionally skip the std::complex<long double> cases when they'll
fail.
PR libstdc++/88204
* testsuite/26_numerics/complex/operators/more_constexpr.cc: Do not
test std::complex<long double> if long double format is IBM128.
* testsuite/26_numerics/complex/requirements/more_constexpr.cc:
Likewise.
vries [Wed, 9 Jan 2019 00:07:55 +0000 (00:07 +0000)]
[libgomp, testsuite, openacc] Don't use const int for dimensions
Const int is handled differently at -O0 for -xc and -xc++, which can cause noise
in testsuite/libgomp.oacc-c-c++-common test-cases (which are both run for c and
c++) if const int is used for launch dimensions.
vries [Wed, 9 Jan 2019 00:07:45 +0000 (00:07 +0000)]
[nvptx, libgomp] Don't launch with num_workers == 0
When using a compiler build with:
...
+#define PTX_DEFAULT_VECTOR_LENGTH PTX_CTA_SIZE
+#define PTX_MAX_VECTOR_LENGTH PTX_CTA_SIZE
...
and running the libgomp testsuite, we run into an execution failure in
parallel-loop-1.c, due to a cuda launch failure:
...
nvptx_exec: kernel f6_none_none$_omp_fn$0: launch gangs=480, workers=0, \
vectors=1024
libgomp: cuLaunchKernel error: invalid argument
...
because workers == 0.
The workers variable is set to 0 here in nvptx_exec:
...
workers = blocks / actual_vectors;
...
because actual_vectors is 1024, and blocks is 768:
...
cuOccupancyMaxPotentialBlockSize: grid = 10, block = 768
...
Fix this by ensuring that workers is at least one.
2019-01-09 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (nvptx_exec): Make sure to launch with at least
one worker.
ian [Wed, 9 Jan 2019 00:05:12 +0000 (00:05 +0000)]
compiler: use int type for len & cap in slice value
Slice value expression has backend type a struct of a pointer and
two ints. Make sure the len and cap are converted to int when
creating slice value expression.
redi [Tue, 8 Jan 2019 23:15:49 +0000 (23:15 +0000)]
Pretty printer test fixes and improvements
Test that StdUniquePtrPrinter correctly prints std::unique_ptr objects
using the old layout, prior to the PR libstdc++/77990 changes.
The printer test for a valueless std::variant started to fail because
the PR libstdc++/87431 fix meant it no longer became valueless. Change
the test to use a type that is not trivially copyable, so that the
exception causes it to become valueless.
* testsuite/libstdc++-prettyprinters/compat.cc: Test printer support
for old std::unique_ptr layout.
* testsuite/libstdc++-prettyprinters/cxx17.cc: Fix std::variant test
to become valueless. Add filesystem::path tests.
redi [Tue, 8 Jan 2019 23:00:46 +0000 (23:00 +0000)]
PR libstdc++/87855 fix optional for types with non-trivial copy/move
When the contained value is not trivially copy (or move) constructible
the union's copy (or move) constructor will be deleted, and so the
_Optional_payload delegating constructors are invalid. G++ fails to
diagnose this because it incorrectly performs copy elision in the
delegating constructors. Clang does diagnose it (llvm.org/PR40245).
The solution is to avoid performing any copy (or move) when the
contained value's copy (or move) constructor isn't trivial. Instead the
contained value can be constructed by calling _M_construct. This is OK,
because the relevant constructor doesn't need to be constexpr when the
contained value isn't trivially copy (or move) constructible.
Additionally, this patch removes a lot of code duplication in the
_Optional_payload partial specializations and the _Optional_base partial
specialization, by hoisting it into common base classes.
The Python pretty printer for std::optional needs to be adjusted to
support the new layout. Retain support for the old layout, and add a
test to verify that the support still works.
PR libstdc++/87855
* include/std/optional (_Optional_payload_base): New class template
for common code hoisted from _Optional_payload specializations. Use
a template for the union, to allow a partial specialization for
types with non-trivial destructors. Add constructors for in-place
initialization to the union.
(_Optional_payload(bool, const _Optional_payload&)): Use _M_construct
to perform non-trivial copy construction, instead of relying on
non-standard copy elision in a delegating constructor.
(_Optional_payload(bool, _Optional_payload&&)): Likewise for
non-trivial move construction.
(_Optional_payload): Derive from _Optional_payload_base and use it
for everything except the non-trivial assignment operators, which are
defined as needed.
(_Optional_payload<false, C, M>): Derive from the specialization
_Optional_payload<true, false, false> and add a destructor.
(_Optional_base_impl::_M_destruct, _Optional_base_impl::_M_reset):
Forward to corresponding members of _Optional_payload.
(_Optional_base_impl::_M_is_engaged, _Optional_base_impl::_M_get):
Hoist common members from _Optional_base.
(_Optional_base): Make all members and base class public.
(_Optional_base::_M_get, _Optional_base::_M_is_engaged): Move to
_Optional_base_impl.
* python/libstdcxx/v6/printers.py (StdExpOptionalPrinter): Add
support for new std::optional layout.
* testsuite/libstdc++-prettyprinters/compat.cc: New test.
janus [Tue, 8 Jan 2019 19:29:01 +0000 (19:29 +0000)]
2019-01-08 Janus Weil <janus@gcc.gnu.org>
PR fortran/88047
* class.c (gfc_find_vtab): For polymorphic typespecs, the components of
the class container may not be available (in case of invalid code).
2019-01-08 Janus Weil <janus@gcc.gnu.org>
PR fortran/88047
* gfortran.dg/class_69.f90: New test case.
mpolacek [Tue, 8 Jan 2019 17:37:51 +0000 (17:37 +0000)]
PR c++/88548 - this accepted in static member functions.
* parser.c (cp_debug_parser): Adjust printing of
local_variables_forbidden_p.
(cp_parser_new): Set local_variables_forbidden_p to 0 rather than false.
(cp_parser_primary_expression): When checking
local_variables_forbidden_p, use THIS_FORBIDDEN or
LOCAL_VARS_FORBIDDEN.
(cp_parser_lambda_body): Update the type of
local_variables_forbidden_p. Set it to 0 rather than false.
(cp_parser_condition): Adjust call to cp_parser_declarator.
(cp_parser_explicit_instantiation): Likewise.
(cp_parser_init_declarator): Likewise.
(cp_parser_declarator): New parameter. Use it.
(cp_parser_direct_declarator): New parameter. Use it to set
local_variables_forbidden_p. Adjust call to cp_parser_declarator.
(cp_parser_type_id_1): Adjust call to cp_parser_declarator.
(cp_parser_parameter_declaration): Likewise.
(cp_parser_default_argument): Update the type of
local_variables_forbidden_p. Set it to LOCAL_VARS_AND_THIS_FORBIDDEN
rather than true.
(cp_parser_member_declaration): Tell cp_parser_declarator if we saw
'static' or 'friend'.
(cp_parser_exception_declaration): Adjust call to cp_parser_declarator.
(cp_parser_late_parsing_default_args): Update the type of
local_variables_forbidden_p. Set it to LOCAL_VARS_AND_THIS_FORBIDDEN
rather than true.
(cp_parser_cache_defarg): Adjust call to cp_parser_declarator.
(cp_parser_objc_class_ivars): Likewise.
(cp_parser_objc_struct_declaration): Likewise.
(cp_parser_omp_for_loop_init): Likewise.
* parser.h (cp_parser): Change the type of local_variables_forbidden_p
to unsigned char.
(LOCAL_VARS_FORBIDDEN, LOCAL_VARS_AND_THIS_FORBIDDEN, THIS_FORBIDDEN):
Define.
marxin [Tue, 8 Jan 2019 14:45:28 +0000 (14:45 +0000)]
Use proper type in linear transformation in tree-switch-conversion (PR tree-optimization/88753).
2019-01-08 Martin Liska <mliska@suse.cz>
PR tree-optimization/88753
* tree-switch-conversion.c (switch_conversion::build_one_array):
Come up with local variable constructor. Convert first to
type of constructor values.
2019-01-08 Martin Liska <mliska@suse.cz>
PR tree-optimization/88753
* gcc.dg/tree-ssa/pr88753.c: New test.
redi [Tue, 8 Jan 2019 13:25:19 +0000 (13:25 +0000)]
PR libstdc++/88066 use <> for includes not ""
Using #include "..." to include a header in the same directory fails if
the user compiles with -I-, so always use something like <bits/...> for
internal headers.
I haven't added tests for this, because dg-options adds options to the
end, and the position of -I- matters (if it's at the end then the tests
won't find any headers in the build tree, as they're specified by -I
options earlier in the flags). It's been manually tested though.
PR libstdc++/88066
* include/bits/locale_conv.h: Use <> for includes not "".
* include/ext/random: Likewise.
* include/ext/vstring.h: Likewise.
rguenth [Tue, 8 Jan 2019 13:05:47 +0000 (13:05 +0000)]
2019-01-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/86554
* tree-ssa-sccvn.c (eliminate_dom_walker, rpo_elim,
rpo_avail): Move earlier.
(visit_nary_op): When value-numbering to expressions
with different overflow behavior make sure there's an
available expression on the path.
* gcc.dg/torture/pr86554-1.c: New testcase.
* gcc.dg/torture/pr86554-2.c: Likewise.
redi [Tue, 8 Jan 2019 10:18:54 +0000 (10:18 +0000)]
PR libstdc++/88749 fix build failure in src/filesystem/ops.cc
PR libstdc++/88749
* src/filesystem/ops.cc (last_write_time): Fix preprocessor condition
to match the one that controls whether utimbuf and utime are declared.
pmderodat [Tue, 8 Jan 2019 09:52:32 +0000 (09:52 +0000)]
[Ada] Revert recent changes in the generation of deps in ali files
Following the discovery of regressions in GPRbuild, this reverts both
r263100 and r264608:
2019-01-08 Justin Squirek <squirek@adacore.com>
Revert:
2018-07-31 Justin Squirek <squirek@adacore.com>
gcc/ada/
* lib-writ.adb (Write_With_Lines): Modfiy the generation
of dependencies within ali files so that source unit
bodies are properly listed even if said bodies are
missing. Perform legacy behavior in GNATprove mode.
* lib-writ.ads: Modify documentation to reflect current
behavior.
and:
2018-09-26 Justin Squirek <squirek@adacore.com>
gcc/ada/
* lib-writ.adb, lib-writ.ads (Write_With_Lines): Add
documentation and an extra conditional check for RCI
units so that generated ali files will list the spec
only instead of a body when a body is not found.
iains [Tue, 8 Jan 2019 09:26:29 +0000 (09:26 +0000)]
teststuite - avoid parts of builtin-has-attribute tests requireing alias support.
2019-01-08 Iain Sandoe <iain@sandoe.co.uk>
gcc/testsuite/
* c-c++-common/builtin-has-attribute-3.c: Skip tests requiring symbol
alias support.
* c-c++-common/builtin-has-attribute-4.c: Likewise.
Append match for warning that ‘protected’ attribute is not supported.
jakub [Tue, 8 Jan 2019 08:57:58 +0000 (08:57 +0000)]
PR c++/88554
* decl.c (finish_function): For -Wreturn-type don't add a return *this;
fixit hint if current_class_ref is NULL. Use a single if instead of
two nested ones.
dmalcolm [Tue, 8 Jan 2019 01:39:09 +0000 (01:39 +0000)]
Fix jit test case (PR jit/88747)
Amongst other changes, r266077 updated value_range_base::dump so
that it additionally prints the type. This broke an assertion within
the jit testsuite, in jit.dg/test-sum-of-squares.c, which was checking
for:
": [-INF, n_"
but was now getting:
": signed int [-INF, n_"
The test is merely intended as a simple verification that we can read
dump files via gcc_jit_context_enable_dump.
This patch loosens the requirements on the dump so that it should work
with either version of value_range_base::dump.
amodra [Mon, 7 Jan 2019 22:54:40 +0000 (22:54 +0000)]
genattrtab bit-rot, and if_then_else in values
This patch started off just by adding if_then_else support in
write_attr_value to be able to write a saner expression for powerpc
tls_gdld_nomark length. Then I noticed bit-rot in functions used to
calculate insn_default_length, insn_min_length, and length_unit_log
(which are used by the shorten_branches pass). These functions
don't handle a const_int length value and return an "unknown" status
that isn't used, or in the case of or_attr_value, doesn't need to be
used. min_attr_value also attempts to return INT_MAX for the
unhandled rtl case, but this can get lost in recursive calls. I fixed
that problem by returning INT_MIN instead, and translating that to
INT_MAX in the only caller of min_attr_value.
PR target/88614
* genattrtab.c (max_attr_value, min_attr_value, or_attr_value):
Delete "unknownp" parameter. Adjust callers. Handle
CONST_INT, PLUS, MINUS, and MULT.
(attr_value_aligned): Renamed from or_attr_value.
(min_attr_value): Return INT_MIN for unhandled rtl case..
(min_fn): ..and translate to INT_MAX here.
(write_length_unit_log): Modify to cope without "unknown".
(write_attr_value): Handle IF_THEN_ELSE.
jsm28 [Mon, 7 Jan 2019 22:39:43 +0000 (22:39 +0000)]
Fix diagnostics for never-defined inline and nested functions (PR c/88720, PR c/88726).
Bugs 88720 and 88726 report issues where a function is declared inline
in an inner scope, resulting in spurious diagnostics about it being
declared but never defined when that scope is left (possibly in some
cases also wrongly referring to the function as a nested function).
These are regressions that were introduced with the support for C99
inline semantics in 4.3 (they don't appear with 4.2; it's possible
some aspects of the bugs might have been introduced later than 4.3).
For the case of functions being wrongly referred to as nested,
DECL_EXTERNAL was not the right condition for a function being
non-nested; TREE_PUBLIC is appropriate for the case of non-nested
functions with external linkage, while !b->nested means this is the
outermost scope in which the function was declared and so avoids
catching the case of a file-scope static being redeclared inline
inside a function.
For the non-nested, external-linkage case, the code attempts to avoid
duplicate diagnostics by diagnosing only when scope != external_scope,
but actually scope == external_scope is more appropriate, as it's only
when the file and external scopes are popped that the code can
actually tell whether a function ended up being defined, and all such
functions will appear in the (GCC-internal) external scope.
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
PR c/88720
PR c/88726
gcc/c:
* c-decl.c (pop_scope): Use TREE_PUBLIC and b->nested to determine
whether a function is nested, not DECL_EXTERNAL. Diagnose inline
functions declared but never defined only for external scope, not
for other scopes.
gcc/testsuite:
* gcc.dg/inline-40.c, gcc.dg/inline-41.c: New tests.
ian [Mon, 7 Jan 2019 22:07:26 +0000 (22:07 +0000)]
runtime: in doscanstackswitch, set gp->m before gogo
This is following CL 156038. doscanstackswitch uses the same
mechanism of switching goroutines as getTraceback, and so has
the same problem as described in issue golang/go#29448. This CL
applies the same fix.
ian [Mon, 7 Jan 2019 21:44:06 +0000 (21:44 +0000)]
compiler: move slice construction to callers of makeslice
This is the gccgo version of https://golang.org/cl/141822:
Only return a pointer p to the new slices backing array from makeslice.
Makeslice callers then construct sliceheader{p, len, cap} explictly
instead of makeslice returning the slice.
This change caused the GCC backend to break the runtime/pprof test by
merging together the identical functions allocateReflectTransient and
allocateTransient2M. This caused the traceback to be other than
expected. Fix that by making the functions not identical.
This is a step toward updating libgo to the Go1.12beta1 release.
ian [Mon, 7 Jan 2019 20:12:39 +0000 (20:12 +0000)]
runtime: in getTraceback, set gp->m before gogo
Currently, when collecting a traceback for another goroutine,
getTraceback calls gogo(gp) switching to gp, which will resume in
mcall, which will call gtraceback, which will set up gp->m. There
is a gap between setting the current running g to gp and setting
gp->m. If a profiling signal arrives in between, sigtramp will
see a non-nil gp with a nil m, and will seg fault. Fix this by
setting up gp->m first.
rsandifo [Mon, 7 Jan 2019 18:53:44 +0000 (18:53 +0000)]
Fix IFN_MASK_STORE handling of IFN_GOMP_SIMD_LANE
The IFN_GOMP_SIMD_LANE handling in vectorizable_store tries to use MEM_REF
offsets to maintain pointer disambiguation info. This patch makes sure
that we don't try to do the same optimisation for IFN_MASK_STOREs, which
have no similar offset argument.
The patch fixes libgomp.c-c++-common/pr66199-*.c for SVE. Previously
we had an ncopies==2 store and stored both halves to the same address.
2019-01-07 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-stmts.c (vectorizable_store): Don't use the dataref_offset
optimization for masked stores.
edlinger [Mon, 7 Jan 2019 17:08:51 +0000 (17:08 +0000)]
PR c++/88261
PR c++/69338
PR c++/69696
PR c++/69697
* cp-tree.h (LOOKUP_ALLOW_FLEXARRAY_INIT): New flag value.
* typeck2.c (digest_init_r): Raise an error for non-static
initialization of a flexible array member.
(process_init_constructor, massage_init_elt,
process_init_constructor_array, process_init_constructor_record,
process_init_constructor_union, process_init_constructor): Add the
flags parameter and pass it thru.
(store_init_value): Pass LOOKUP_ALLOW_FLEXARRAY_INIT parameter to
digest_init_flags for static decls.
was out-of-sync with the new flat loop structure. Now that all that
reversing is gone, we can just use the result of duplicate_and_interleave
directly.
The other cases shouldn't be affected by postponing the insertion
of ctor_seq, since gimple_build* appends to the seq without clearing
it first (unlike some of the gimplify routines).
The ICE is already covered by gcc.dg/vect/pr63379.c.
2019-01-07 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR middle-end/88567
* tree-vect-loop.c (get_initial_defs_for_reduction): Pass the
output vector directly to duplicate_and_interleave instead of
going through a temporary. Postpone insertion of ctor_seq to
the end of the loop.
redi [Mon, 7 Jan 2019 14:58:44 +0000 (14:58 +0000)]
PR libstdc++/87787 avoid undefined null args to memcpy and memmove
The C++ char_traits and ctype APIs do not disallow null pointer
arguments, so we need explicit checks to ensure we don't forward null
pointers to memcpy or memmove.
PR libstdc++/87787
* include/bits/char_traits.h (char_traits::move): Do not pass null
pointers to memmove.
* include/bits/locale_facets.h
(ctype<char>::widen(const char*, const char*, char*)): Do not
pass null pointers to memcpy.
(ctype<char>::narrow(const char*, const char*, char, char*)):
Likewise.
(ctype<char>::do_widen(const char*, const char*, char*)):
Likewise.
(ctype<char>::do_narrow(const char*, const char*, char, char*)):
Likewise.
rearnsha [Mon, 7 Jan 2019 14:49:00 +0000 (14:49 +0000)]
Investigating PR target/86891 revealed a number of issues with the way
the AArch64 backend was handing overflow detection patterns. Firstly,
expansion for signed and unsigned types is not the same as in one form
the overflow is detected via the C flag and in the other it is done
via the V flag in the PSR. Secondly, particular care has to be taken
when describing overflow of signed types: the comparison has to be
performed conceptually on a value that cannot overflow and compared to
a value that might have overflowed.
It became apparent that some of the patterns were simply unmatchable
(they collapse to NEG in the RTL rather than subtracting from zero)
and a number of patterns were overly restrictive in terms of the
immediate constants that they supported. I've tried to address all of
these issues as well.
gcc:
PR target/86891
* config/aarch64/aarch64.c (aarch64_expand_subvti): New parameter
unsigned_p. Handle signed and unsigned overflow correction as
required.
* config/aarch64/aarch64-protos.h (aarch64_expand_subvti): Update
prototype.
* config/aarch64/aarch64.md (addv<mode>4): Use aarch64_plus_operand
for operand 2.
(add<mode>3_compareV_imm): Make this callable for expanding.
(subv<GPI:mode>4): Use register_operand for operand 1. Use
aarch64_plus_operand for operand 2.
(subv<GPI:mode>_insn): New insn pattern.
(subv<GPI:mode>_imm): Likewise.
(negv<GPI:mode>3): New expand pattern.
(negv<GPI:mode>_insn): New insn pattern.
(negv<GPI:mode>_cmp_only): Likewise.
(cmpv<GPI:mode>_insn): Likewise.
(subvti4): Use register_operand for operand 1. Update call to
aarch64_expand_subvti.
(usubvti4): Likewise.
(negvti3): New expand pattern.
(negdi_carryout): New insn pattern.
(negvdi_carryinV): New insn pattern.
(sub<mode3>_compare1_imm): Delete named insn pattern, make anonymous
version the named version.
(peepholes to convert to sub<mode3>_compare1_imm): Adjust order of
operands.
(usub<GPI:mode>3_carryinC, usub<GPI:mode>3_carryinC_z1): New insn
patterns.
(usub<GPI:mode>3_carryinC_z2, usub<GPI:mode>3_carryinC): New insn
patterns.
(sub<mode>3_carryinCV, sub<mode>3_carryinCV_z1_z2): Delete.
(sub<mode>3_carryinCV_z1, sub<mode>3_carryinCV_z2): Delete.
(sub<mode>3_carryinCV): Delete.
(sub<GPI:mode>3_carryinV): New expand pattern.
sub<mode>3_carryinV, sub<mode>3_carryinV_z2): New insn patterns.
testsuite:
* gcc.target/aarch64/subs_compare_2.c: Make '#' immediate prefix
optional in scan pattern.
redi [Mon, 7 Jan 2019 12:46:40 +0000 (12:46 +0000)]
Update documentation for C++17 filesystem library
* doc/xml/manual/spine.xml: Update copyright years.
* doc/xml/manual/status_cxx2017.xml: Adjust note about -lstdc++fs.
* doc/xml/manual/using.xml: Remove requirement to link with -lstdc++fs
for C++17 filesystem library.
* doc/html/*: Regenerate.
redi [Mon, 7 Jan 2019 12:38:51 +0000 (12:38 +0000)]
Fix build for systems without POSIX truncate
Older versions of newlib do not provide truncate so add a configure
check for it, and provide a fallback definition.
There were also some missing exports in the linker script, which went
unnoticed because there are no tests for some functions. A new link-only
test checks that every filesystem operation function is defined by the
library.
* acinclude.m4 (GLIBCXX_CHECK_FILESYSTEM_DEPS): Check for truncate.
* config.h.in: Regenerate.
* config/abi/pre/gnu.ver: Order patterns for filesystem operations
alphabetically and add missing entries for copy_symlink,
hard_link_count, rename, and resize_file.
* configure: Regenerate.
* src/c++17/fs_ops.cc (resize_file): Remove #if so posix::truncate is
used unconditionally.
* src/filesystem/ops-common.h (__gnu_posix::truncate)
[!_GLIBCXX_HAVE_TRUNCATE]: Provide fallback definition that only
supports truncating to zero length.
* testsuite/27_io/filesystem/operations/all.cc: New test.
* testsuite/27_io/filesystem/operations/resize_file.cc: New test.
rsandifo [Mon, 7 Jan 2019 12:17:10 +0000 (12:17 +0000)]
[2/2] PR88598: Optimise reduc (bit_and)
This patch folds certain reductions of X & CST to X[I] & CST[I] if I is
the only nonzero element of CST. This includes the motivating case in
which CST[I] is -1.
We could do the same for REDUC_MAX on unsigned types, but I wasn't sure
that that special case was worth it.
2019-01-07 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR tree-optimization/88598
* tree.h (single_nonzero_element): Declare.
* tree.c (single_nonzero_element): New function.
* match.pd: Fold certain reductions of X & CST to X[I] & CST[I]
if I is the only nonzero element of CST.
which for -fno-signed-zeros -fno-signaling-nans can be simplified to:
vect__6.24_42 = vect__5.23_41 & { 0, -1, 0, 0 };
I deliberately didn't handle COMPLEX_CST or CONSTRUCTOR in
initializer_each_zero_or_onep since there are no current use cases.
The patch also makes (un)signed_type_for handle floating-point types.
I tried to audit all callers and the few that handle null returns would
be unaffected.
2019-01-07 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR tree-optimization/88598
* tree.h (initializer_each_zero_or_onep): Declare.
* tree.c (initializer_each_zero_or_onep): New function.
(signed_or_unsigned_type_for): Handle float types too.
(unsigned_type_for, signed_type_for): Update comments accordingly.
* match.pd: Fold x * { 0 or 1, 0 or 1, ...} to
x & { 0 or -1, 0 or -1, ... }.
vries [Mon, 7 Jan 2019 10:01:49 +0000 (10:01 +0000)]
[nvptx] Force vl32 if calling vector-partitionable routines
With PTX_MAX_VECTOR_LENGTH set to larger than PTX_WARP_SIZE, routines can be
called from offloading regions with vector-size set to larger than warp size.
OTOH, vector-partitionable routines assume warp-sized vector length.
Detect if we're calling a vector-partitionable routine from an offloading
region, and if so, fall back to warp-sized vector length in that region.
2019-01-07 Tom de Vries <tdevries@suse.de>
PR target/85486
* config/nvptx/nvptx.c (has_vector_partitionable_routine_calls_p): New
function.
(nvptx_goacc_validate_dims): Force vl32 if calling vector-partitionable
routines.
jakub [Mon, 7 Jan 2019 09:52:29 +0000 (09:52 +0000)]
* config/i386/sse.md (vec_extract<mode><ssehalfvecmodelower>): Use
V_256_512 iterator instead of V_512 and TARGET_AVX instead of
TARGET_AVX512F as condition.
jakub [Mon, 7 Jan 2019 09:51:46 +0000 (09:51 +0000)]
PR debug/88723
* dwarf2out.c (const_ok_for_output_1): Remove redundant call to
const_not_ok_for_debug_p target hook.
(mem_loc_descriptor) <case UNSPEC>: Only call const_ok_for_output_1
on UNSPEC and subexpressions thereof if all subexpressions of the
UNSPEC are CONSTANT_P.
jakub [Mon, 7 Jan 2019 08:49:08 +0000 (08:49 +0000)]
PR c++/85052
* tree-vect-generic.c: Include insn-config.h and recog.h.
(expand_vector_piecewise): Add defaulted ret_type argument,
if non-NULL, use that in preference to type for the result type.
(expand_vector_parallel): Formatting fix.
(do_vec_conversion, do_vec_narrowing_conversion,
expand_vector_conversion): New functions.
(expand_vector_operations_1): Call expand_vector_conversion
for VEC_CONVERT ifn calls.
* internal-fn.def (VEC_CONVERT): New internal function.
* internal-fn.c (expand_VEC_CONVERT): New function.
* fold-const-call.c (fold_const_vec_convert): New function.
(fold_const_call): Use it for CFN_VEC_CONVERT.
* doc/extend.texi (__builtin_convertvector): Document.
c-family/
* c-common.h (enum rid): Add RID_BUILTIN_CONVERTVECTOR.
(c_build_vec_convert): Declare.
* c-common.c (c_build_vec_convert): New function.
c/
* c-parser.c (c_parser_postfix_expression): Parse
__builtin_convertvector.
cp/
* cp-tree.h (cp_build_vec_convert): Declare.
* parser.c (cp_parser_postfix_expression): Parse
__builtin_convertvector.
* constexpr.c: Include fold-const-call.h.
(cxx_eval_internal_function): Handle IFN_VEC_CONVERT.
(potential_constant_expression_1): Likewise.
* semantics.c (cp_build_vec_convert): New function.
* pt.c (tsubst_copy_and_build): Handle CALL_EXPR to
IFN_VEC_CONVERT.
testsuite/
* c-c++-common/builtin-convertvector-1.c: New test.
* c-c++-common/torture/builtin-convertvector-1.c: New test.
* g++.dg/ext/builtin-convertvector-1.C: New test.
* g++.dg/cpp0x/constexpr-builtin4.C: New test.
vries [Mon, 7 Jan 2019 08:10:56 +0000 (08:10 +0000)]
[nvptx] Don't emit barriers for empty loops -- fix
When compiling an empty loop:
...
long long v1;
#pragma acc parallel num_gangs (640) num_workers(1) vector_length (128)
#pragma acc loop
for (v1 = 0; v1 < 20; v1 += 2)
;
...
the compiler emits two subsequent bar.syncs. This triggers some bug on my
quadro m1200 (I'm assuming in the ptxas/JIT compiler) that hangs the testcase.
This patch works around the bug by doing an optimization: we detect that this is
an empty loop (a forked immediately followed by a joining), and don't emit the
barriers.
The patch does not include the test-case yet, since vector_length (128) is not
yet supported at this point.
vries [Mon, 7 Jan 2019 08:10:47 +0000 (08:10 +0000)]
[nvptx] Add support for a per-worker broadcast buffer and barrier
Add support for a per-worker broadcast buffer and barrier, to be used for
openacc vector_length larger than warp-size.
2019-01-07 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (oacc_bcast_partition): Declare.
(nvptx_option_override): Init oacc_bcast_partition.
(nvptx_init_oacc_workers): New function.
(nvptx_declare_function_name): Call nvptx_init_oacc_workers.
(nvptx_needs_shared_bcast): New function.
(nvptx_find_par): Generalize to enable vectors to use shared-memory
to propagate state.
(nvptx_shared_propagate): Initialize vector bcast partition and
synchronization state.
(nvptx_single): Generalize to enable vectors to use shared-memory
to propagate state.
(nvptx_process_pars): Likewise.
(nvptx_set_current_function): Initialize oacc_broadcast_partition.
* config/nvptx/nvptx.h (struct machine_function): Add
bcast_partition and sync_bar members.
redi [Sun, 6 Jan 2019 22:34:37 +0000 (22:34 +0000)]
PR libstdc++/86756 Move rest of std::filesystem to libstdc++.so
Move std::filesystem directory iterators and operations from
libstdc++fs.a to main libstdc++ library. These components have many
dependencies on OS support, which is not available on all targets. Some
additional autoconf checks and conditional compilation is needed to
ensure the files will build for all targets. Previously this code was
not compiled without --enable-libstdcxx-filesystem-ts but the C++17
components should be available for all hosted builds.
The tests for these components no longer need to link to libstdc++fs.a,
but are not expected to pass on all targets. To avoid numerous failures
on targets which are not expected to pass the tests (due to missing OS
functionality) leave the dg-require-filesystem-ts directives in place
for now. This will ensure the tests only run for builds where the
filesystem-ts library is built, which presumably means some level of OS
support is present.
PR libstdc++/86756
* acinclude.m4 (GLIBCXX_CHECK_FILESYSTEM_DEPS): Check for utime and
lstat and define _GLIBCXX_USE_UTIME and _GLIBCXX_USE_LSTAT.
* config.h.in: Regenerate.
* config/abi/pre/gnu.ver (GLIBCXX_3.4.26): Export symbols for
remaining std::filesystem types and functions.
* configure: Regenerate.
* src/c++17/Makefile.am: Add C++17 filesystem sources.
* src/c++17/Makefile.in: Regenerate.
* src/c++17/cow-fs_dir.cc: Move src/filesystem/cow-std-dir.cc to
here, and change name of included file.
* src/c++17/cow-fs_ops.cc: Move src/filesystem/cow-std-ops.cc to
here, and change name of included file.
* src/c++17/fs_dir.cc: Move src/filesystem/std-dir.cc to here. Change
path to dir-common.h.
* src/c++17/fs_ops.cc: Move src/filesystem/std-ops.cc to here. Change
path to ops-common.h. Disable -Wunused-parameter warnings.
(internal_file_clock): Define unconditionally.
[!_GLIBCXX_HAVE_SYS_STAT_H] (internal_file_clock::from_stat): Do not
define.
(do_copy_file, do_space): Move definitions to ops.common.h.
(copy, file_size, hard_link_count, last_write_time, space): Only
perform operation when _GLIBCXX_HAVE_SYS_STAT_H is defined, otherwise
report an error.
(last_write_time, read_symlink): Remove unused attributes from
parameters.
* src/filesystem/Makefile.am: Remove C++17 filesystem sources.
* src/filesystem/Makefile.in: Regenerate.
* src/filesystem/cow-std-dir.cc: Move to src/c++17/cow-fs_dir.cc.
* src/filesystem/cow-std-ops.cc: Move to src/c++17/cow-fs_ops.cc.
* src/filesystem/std-dir.cc: Move to src/c++17/fs_dir.cc.
* src/filesystem/std-ops.cc: Move to src/c++17/fs_ops.cc.
* src/filesystem/dir-common.h [!_GLIBCXX_HAVE_DIRENT_H]: Define
dummy types and functions instead of using #error.
* src/filesystem/dir.cc [!_GLIBCXX_HAVE_DIRENT_H]: Use #error.
* src/filesystem/ops-common.h [!_GLIBCXX_USE_LSTAT] (lstat): Define
in terms of stat.
[!_GLIBCXX_HAVE_UNISTD_H]: Define dummy types and functions.
(do_copy_file, do_space): Move definitions here from std-ops.cc.
* src/filesystem/ops.cc: Adjust calls to do_copy_file and do_space
to account for new namespace.
* testsuite/27_io/filesystem/directory_entry/86597.cc: Remove
-lstdc++fs from dg-options.
* testsuite/27_io/filesystem/directory_entry/lwg3171.cc: Likewise.
* testsuite/27_io/filesystem/file_status/1.cc: Likewise.
* testsuite/27_io/filesystem/filesystem_error/cons.cc: Likewise.
* testsuite/27_io/filesystem/filesystem_error/copy.cc: Likewise.
* testsuite/27_io/filesystem/iterators/directory_iterator.cc:
Likewise.
* testsuite/27_io/filesystem/iterators/pop.cc: Likewise.
* testsuite/27_io/filesystem/iterators/recursive_directory_iterator.cc:
Likewise.
* testsuite/27_io/filesystem/operations/absolute.cc: Likewise.
* testsuite/27_io/filesystem/operations/canonical.cc: Likewise.
* testsuite/27_io/filesystem/operations/copy.cc: Likewise.
* testsuite/27_io/filesystem/operations/copy_file.cc: Likewise.
* testsuite/27_io/filesystem/operations/create_directories.cc:
Likewise.
* testsuite/27_io/filesystem/operations/create_directory.cc: Likewise.
* testsuite/27_io/filesystem/operations/create_symlink.cc: Likewise.
* testsuite/27_io/filesystem/operations/current_path.cc: Likewise.
* testsuite/27_io/filesystem/operations/equivalent.cc: Likewise.
* testsuite/27_io/filesystem/operations/exists.cc: Likewise.
* testsuite/27_io/filesystem/operations/file_size.cc: Likewise.
* testsuite/27_io/filesystem/operations/is_empty.cc: Likewise.
* testsuite/27_io/filesystem/operations/last_write_time.cc: Likewise.
* testsuite/27_io/filesystem/operations/permissions.cc: Likewise.
* testsuite/27_io/filesystem/operations/proximate.cc: Likewise.
* testsuite/27_io/filesystem/operations/read_symlink.cc: Likewise.
* testsuite/27_io/filesystem/operations/relative.cc: Likewise.
* testsuite/27_io/filesystem/operations/remove.cc: Likewise.
* testsuite/27_io/filesystem/operations/remove_all.cc: Likewise.
* testsuite/27_io/filesystem/operations/space.cc: Likewise.
* testsuite/27_io/filesystem/operations/status.cc: Likewise.
* testsuite/27_io/filesystem/operations/symlink_status.cc: Likewise.
* testsuite/27_io/filesystem/operations/temp_directory_path.cc:
Likewise.
* testsuite/27_io/filesystem/operations/weakly_canonical.cc: Likewise.
redi [Sun, 6 Jan 2019 22:34:29 +0000 (22:34 +0000)]
PR libstdc++/86756 add std::filesystem::path to libstdc++.so
Move the C++17 std::filesystem::path definitions from the libstdc++fs.a
archive to the main libstdc++ library. The path classes do not depend on
any OS functions, so can be defined unconditionally on all targets
(rather than depending on --enable-libstdcxx-filesystem-ts). The tests
should pass on all targets too.
redi [Sun, 6 Jan 2019 20:52:34 +0000 (20:52 +0000)]
PR libstdc++/87431 fix regression introduced by r264574
The previous patch for PR 87431 assumed that initialing a scalar type
could not throw, but it can obtain its value via a conversion operator,
which could throw. This meant the variant could get into a valueless
state, but the valueless_by_exception() member function would always
return false.
This patch fixes it by changing the emplace members to have strong
exception safety when initializing a contained value of trivially
copyable type. The _M_valid() member gets a corresponding change to
always return true for trivially copyable types, not just scalar types.
Strong exception safety (i.e. never becoming valueless) is achieved by
only replacing the current contained value once any potentially throwing
operations have completed. If constructing the new contained value can
throw then a new std::variant object is constructed to hold it, and then
move-assigned to *this (which won't throw).
PR libstdc++/87431
* include/std/variant (_Variant_storage<true, _Types...>::_M_valid):
Check is_trivially_copyable instead of is_scalar.
(variant::emplace<N, Args>(Args&&...)): If construction of the new
contained value can throw and its type is trivially copyable then
construct into a temporary variant and move from it, to provide the
strong exception safety guarantee.
(variant::emplace<N, U, Args>(initializer_list<U>, Args&&...)):
Likewise.
* testsuite/20_util/variant/87431.cc: New test.
* testsuite/20_util/variant/run.cc: Adjust test so that throwing
conversion causes valueless state.
tkoenig [Sun, 6 Jan 2019 12:48:58 +0000 (12:48 +0000)]
2019-01-06 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/88658
* gfortran.h: Add macro gfc_real_4_kind
* simplify.c (simplify_min_max): Special case for the types of
AMAX0, AMIN0, MAX1 and MIN1, which actually change the types of
their arguments.
2019-01-06 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/88658
* gfortran.dg/min_max_type_2.f90: New test.
projects / thirdparty / gcc.git / log
