Rearrange gdb/configure.nat to make it simpler and less redundant
The previous commit introduced gdb/configure.nat, but it was just a
copy-and-past (with the necessary adjustments) from the files under
gdb/config/. We can do better than that.
Instead of using one big 'case' statement that matches the
${gdb_host_cpu} and then match each ${gdb_host}, it is possible to
remove a lof of redundancy by matching the most common ${gdb_host}'s
first, setting the common variables for each, and then proceed to
matching specific ${gdb_host}'s and ${gdb_host_cpu}'s. In other
words, reverse the order of the 'case's and take advantage of the fact
that a lot of parameters are the same for each host.
This commit was tested on x86_64 without regressions.
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
Pedro Alves [Fri, 5 May 2017 00:03:28 +0000 (01:03 +0100)]
gdb: Disable -Werror for -Wmaybe-uninitialized
Newer GCCs are triggering false-positive -Wmaybe-uninitialized
warnings around code that uses gdb::optional:
https://sourceware.org/ml/gdb-patches/2017-05/msg00118.html
Using std::optional wouldn't help, it triggers the same warnings:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635
Initializing the variables to quiet the warning would defeat the
purpose of gdb::optional. Making the optional ctor memset its storage
would be a pessimization. Wrapping gdb::optional's internals with
"#pragma GCC diagnostic push/ignored/pop" doesn't work, we'd have to
wrap uses of gdb::optional instead, which I think would get unwieldy
and ugly as we start using gdb::optional more and more.
The -Wmaybe-uninitialized warning is documented as producing false
positives (unlike -Wuninialized), so until we find a better
workaround, disable -Werror for this warning. You'll still see the
warning when building gdb, but it won't cause a build failure.
Tested by building with gcc 4.8.5, 5.3.1, and gcc trunk (20170428).
gdb/ChangeLog:
2017-05-05 Pedro Alves <palves@redhat.com>
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
Pedro Alves [Thu, 4 May 2017 13:43:34 +0000 (14:43 +0100)]
make_cleanup_restore_current_thread: Look up thread earlier
The unconditional is_stopped call already asserts that the thread exists.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* thread.c (make_cleanup_restore_current_thread): Move
find_thread_ptid call before the is_stopped call. Assert that the
thread is found. Replace is_stopped call by checking the thread's
state directly. Remove unnecessary NULL-thread check.
This plugs a leak introduced in the previous change to
get_core_register_section, which removed an xfree call that is
actually necessary because the 'section_name' local is static.
From [1] it looks like the reason the variable was made static to
begin with, was just "laziness" to avoid having to think about freeing
it on every function return path:
The easiest to fix that nowadays is to use a std::string.
I don't see a need to xstrdup the section name in the single-threaded
case though, and also there's more than one place that computes a
multi-threaded section name in the same way. So put the section name
computation in a wrapper class with state.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* corelow.c (thread_section_name): New class.
(get_core_register_section, get_core_siginfo): Use it.
Fix PR21404 - assertion fail when calculating symbol size
Fix a host of problems related to adjustment of
symbol values and sizes when relaxing for avr.
1. Adjust symbol size first before adjusting symbol
value. Otherwise, a symbol whose value just got adjusted to the
relaxed address also ends up getting resized. See pr21404-1.s.
2. Reduce symbol sizes only if their span is below an
alignment boundary. Otherwise, the size gets decremented once when the
actual instruction is relaxed and padding bytes are added, and again
when the padding bytes are deleted (if padding ends up being unnecessary).
pr21404-2.s addresses that, and this bug is really the root cause of PR21404.
3. Adjust all symbol values before an alignment boundary.
Previous code did not adjust symbol values if they fell in the
would-be padded area, resulting in incorrect symbol values in some
cases (see pr21404-3.s).
4. Increase symbol sizes if alignment directives require so.
As pr21404-4.s shows
.global nonzero_sym
L1:
jmp L1
nonzero_sym:
nop
nop
.p2align 2
.size nonzero_sym, .-nonzero_sym
The two nops satisfy the 4 byte alignment at assembly time and
therefore the size of nonzero_sym is 4. Relaxation shortens
the 4 byte jmp to a 2 byte rjmp, and to satisfy 4 byte alignment
the code places 2 extra padding bytes after the nops, increasing
nonzero_sym's size by 2. This wasn't handled before.
If the assembly code does not have any align directives, then the
boundary is the section size, and symbol values and sizes == boundary
should also get adjusted. To handle that case, add a did_pad variable
and use that to determine whether it should use < boundary or <= boundary.
Also get rid of reloc_toaddr, which is now redundant. toaddr is now not
adjusted to handle the above case - the newly added
did_pad variable does the job.
pr21404-{5,6,7,8} are the same testcases written for local symbols, as
the code handles them slightly differently.
Implement the relaxation of MIPS16 PC-relative synthetic LA, DLA, LW and
LD instructions to an equivalent sequence of instructions produced where
the address operand requested is out of range, absolute or requires
linker relocation, for ABIs that use 32-bit addressing and non-PIC code.
The sequence generated uses the register specified for the destination
operand as a temporary and begins with LI to load the high 16-bit part
of the address, then continues with SLL by 16 bits to move that part
into place and finally completes with a suitable operation corresponding
to the synthetic instruction used, one of: 2-argument ADDIU, 2-argument
DADDIU, absolute LW, and absolute LD respectively, providing the low
16-bit part of the address. All instructions use the extended encoding.
As a special exception accept absolute addresses for relaxation even in
PIC code.
For example:
la $2, 0x12345678
produces code as:
li $2, 0x1234
sll $2, $2, 16
addiu $2, 0x5678
would.
Where linker relocation is required emit an R_MIPS16_HI16 relocation on
the initial LI instruction and an R_MIPS16_LO16 relocation on the final
operation.
For example (where `foo' is not local):
lw $3, foo
produces code as:
li $3, %hi(foo)
sll $3, $3, 16
lw $3, %lo(foo)($3)
would.
Emit assembly warnings as appropriate where this new relaxation triggers
in the `nomacro' mode or for an instruction manually placed in a branch
delay slot in the `noreorder' mode. Refrain from relaxation where an
explicit instruction size suffix has been used and in the `noautoextend'
mode.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
`nomacro' flags.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
New macros.
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
(RELAX_MIPS16_CLEAR_MACRO): New macros.
(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
(mips16_macro_frag): New function.
(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Keith Seitz [Wed, 3 May 2017 19:41:09 +0000 (12:41 -0700)]
Make sure malloc is linked into gdb.cp/oranking.cc.
On some platforms, e.g., arm-eabi-none, we need to make certain that
malloc is linked into the program because the test suite uses function
calls requiring malloc:
(gdb) p foo101("abc")
evaluation of this expression requires the program to have a function "malloc".
gdb/testsuite/ChangeLog
* gdb.cp/oranking.cc (dummy): New function to grab malloc.
(main): Call it.
Simon Marchi [Wed, 3 May 2017 13:21:27 +0000 (09:21 -0400)]
gdbarch.sh: Remove commented out TARGET_CHAR_BIT definition
As Pedro commented on the patch "Change field separator in gdbarch.sh",
this commented out definition is probably not useful and should be
removed. It has been commented out for basically forever, and it
probably serves the same intent as addressable_memory_unit_size.
gdb/ChangeLog:
* gdbarch.sh: Remove commented out definition of
TARGET_CHAR_BIT.
* gdbarch.h: Re-generate.
On commit be628ab814f1c90e185d7482d27aa8a991ab5837, both
common/common.m4 was modified in order to check for the presence of
'termios.h', 'termio.h' and 'sgtty.h'. However, I forgot to
regenerate both gdb/configure and gdb/gdbserver/configure. This
commit does that.
MIPS16/GAS: Fix absolute references with PC-relative synthetic instructions
Complement commit 88a7ef168927 ("MIPS16/GAS: Restore unsupported
relocation diagnostics") and also propagate constant expressions, either
already reduced from absolute symbol references or created from literals
in the first place, used as a PC-relative operand with the MIPS16 LA,
LW, DLA and LD synthetic instructions to relaxation, matching the way
forward absolute symbol references have been handled as from the commit
referred and letting relaxation produce any necessary relocations, if
possible, for the absolute value requested to be reproduced at the run
time.
Call `symbol_append' for any expression symbol created for the purpose
of MIPS16 relaxation as with constant expressions now propagated from
earlier on such symbols may make it through and have R_MIPS16_PC16_S1
relocations emitted against, and therefore need to appear in the symbol
table produced.
gas/
* config/tc-mips.c (append_insn): Call `symbol_append' for any
expression symbol created for MIPS16 relaxation.
(match_mips16_insn): Don't encode a constant value as an
immediate with a PC-relative operand.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute-1.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32-1.d:
New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64-1.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
H.J. Lu [Tue, 2 May 2017 23:00:49 +0000 (16:00 -0700)]
x86: Add -Wl,--no-as-needed to some TLS tests
* testsuite/ld-i386/tls.exp: Add -Wl,--no-as-needed to
"TLS without PLT (1)" and "TLS without PLT (3)".
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to
to "TLS without PLT (3)".
The use of ra instead of t1 for address construction provides an
opportunity for a microarchitecture to elide the write of the
destination address, and instead read the target address as an
immediate spread across the fused auipc+jalr pair. The link
register ra in the jalr overwrites the target address temporary.
2017-05-01 Michael Clark <michaeljclark@mac.com>
* riscv-opc.c (riscv_opcodes) <call>: Use RA not T1 as a temporary
register.
Palmer Dabbelt [Mon, 1 May 2017 17:26:32 +0000 (10:26 -0700)]
RISC-V: Allow 32-bit BFD to handle 64-bit objects
We've been telling people that the riscv32-* and riscv64-* toolchains
are exactly the same, but it turns out we were lying: the riscv32-* BFD
doesn't handle 64-bit objects. This fixes that difference, so the ports
are actually the same.
Simon Marchi [Tue, 2 May 2017 17:30:07 +0000 (13:30 -0400)]
Change return type of gdbarch_software_single_step to vector<CORE_ADDR>
This is a relatively straightforward patch that changes
gdbarch_software_single_step so it returns an std::vector<CORE_ADDR>
instead of a VEC (CORE_ADDR).
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to
software_single_step change of return type to
std::vector<CORE_ADDR>.
* linux-low.c (install_software_single_step_breakpoints):
Likewise.
* linux-low.h (install_software_single_step_breakpoints):
Likewise.
Simon Marchi [Tue, 2 May 2017 17:30:07 +0000 (13:30 -0400)]
Change field separator in gdbarch.sh
The fields in the description of the gdbarch interface are separated
using colons. That becomes a problem if we want to use things like
std::vector in it. This patch changes the field separator to use
semicolons instead.
I think there's very little chance we'll ever want to use a semicolon in
one of the fields, but if you think another character would be more
appropriate, let me know.
gdb/ChangeLog:
* gdbarch.sh: Use semi-colon as field separator instead of colon.
* gdbarch.h: Re-generate.
The commit to "Always descend into output section statements in
lang_do_assignments" meant that linker script symbols were not
bfd_link_hash_new when ld called bfd_elf_record_link_assignment.
This patch corrects that problem by testing h->non_elf instead.
PR 21384
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Test h->non_elf
rather than h->root.type == bfd_link_hash_new.
(bfd_elf_record_link_assignment): Similarly, call
bfd_elf_link_mark_dynamic_symbol when h->non_elf.
MIPS16/opcodes: Keep the LSB of PC-relative offsets in disassembly
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Introduce gdb.RecordGap class
As discussed here: https://sourceware.org/ml/gdb-patches/2017-04/msg00157.html
A gap is not an instruction and it should not pretend to be one.
gdb.Record.instruction_history is now a list of gdb.RecordInstruction and
gdb.RecordGap objects. This allows the user to deal with Gaps in the record
in a more sane way.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Use correct ptid in btrace recording
The user would always get the instruction_history and function_call_history
objects of the current thread, not the thread for which the gdb.Record object
was created.
The attached testcase fails without this patch and passes with the patch.
H.J. Lu [Mon, 1 May 2017 18:02:55 +0000 (11:02 -0700)]
x86: Run GNU2 TLS tests with working GNU2 TLS support
Check if GNU2 TLS really works before running GNU2 TLS tests.
* testsuite/ld-i386/tls.exp: Run GNU2 TLS tests only if there
is working GNU2 TLS support.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp (check_gnu2_tls_available): New proc.
Alan Modra [Sat, 29 Apr 2017 05:18:16 +0000 (14:48 +0930)]
PR21432, buffer overflow in perform_relocation
The existing reloc offset range tests didn't catch small negative
offsets less than the size of the reloc field.
PR 21432
* reloc.c (reloc_offset_in_range): New function.
(bfd_perform_relocation, bfd_install_relocation): Use it.
(_bfd_final_link_relocate): Likewise.
Make environ.exp run on all platforms (and create info-program.exp)
This has been on my TODO list for a while. There's a really old bug
about this (PR testsuite/8595), and there was no reason for
environ.exp to be specific for hppa* targets. So this patch removes
this constraint, modernizes the testcase, and cleans up some things.
Most of the tests remained, and some were rewritten (especially the
one that checks if "show environment" works, which is something kind
of hard to do).
As a bonus, I'm adding a separated info-program.exp file containing
all the tests related to "info program" that were present on
environ.exp.
PR testsuite/8595
* gdb.base/environ.exp: Make test available in all architectures.
Move bits related to "info program" testing to
gdb.base/info-program.exp. Rewrite tests to use the two new
procedures mentione below.
(test_set_show_env_var) New procedure.
(test_set_show_env_var_equal): Likewise.
* gdb.base/info-program.exp: New file.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Use tag dispatch regcache ctor in regcache_dup
This patch adds a tag dispatch ctor to create read-only regcache from
a write-through regcache, also this patch deletes copy ctor and
assignment operator.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* regcache.c (regcache::regcache): New tag dispatch ctor.
(do_cooked_read): Moved above.
(regcache_dup): Use the tag dispatch ctor..
* regcache.h (regcache): Declare ctor, delete copy ctor and
assignment operator, remove friend regcache_dup.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Simplify regcache_dup
regcache_dup, in fact, is to create a readonly regcache from a
non-readonly regcache. This patch adds an assert that src is not
readonly.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_dup): Assert !src->m_readonly_p and
call method save instead of regcache_cpy.
* regcache.h (struct regcache): Make regcache_dup a friend.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Class-fy regcache
This patch moves regcache declaration to regcache.h, and converts
regcache apis to member functions, for example, regcache_invalidate
is changed to regcache::invalidate.
This patch also add "m_" prefix to these private fields.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (struct regcache): Move to regcache.h
(regcache::arch): New method.
(regcache_get_ptid): Update.
(get_regcache_arch): Call arch method.
(get_regcache_aspace): Call method aspace.
(register_buffer): Change it to method.
(regcache_save): Change it to regcache::save.
(regcache_restore): Likewise.
(regcache_cpy_no_passthrough): Remove the declaration.
(regcache_cpy): Call methods restore and cpy_no_passthrough.
(regcache_cpy_no_passthrough): Change it to method
cpy_no_passthrough.
(regcache_register_status): Change it to method
get_register_status.
(regcache_invalidate): Change it to method invalidate.
(regcache_thread_ptid_changed): Use methods ptid and set_ptid.
(regcache_raw_update): Change it to method raw_update.
(regcache_raw_read): Likewise.
(regcache_raw_read_signed): Likewise.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_write_signed): Likewise.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_read): Likewise.
(regcache_cooked_read_value): Likewise.
(regcache_cooked_read_signed): Likewise.
(regcache_cooked_read_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
(regcache_raw_set_cached_value): Likewise.
(regcache_raw_write): Likewise.
(regcache_cooked_write): Likewise.
(regcache_xfer_part): Likewise.
(regcache_raw_read_part): Likewise.
(regcache_raw_write_part): Likewise.
(regcache_cooked_read_part): Likewise.
(regcache_cooked_write_part): Likewise.
(regcache_raw_supply): Likewise.
(regcache_raw_collect): Likewise.
(regcache_transfer_regset): Likewise.
(regcache_supply_regset): Likewise.
(regcache_collect_regset): Likewise.
(regcache_debug_print_register): Likewise.
(enum regcache_dump_what): Move it to regcache.h.
(regcache_dump): Change it to method dump.
* regcache.h (enum regcache_dump_what): New.
(class regcache): New.
* target.c (target_fetch_registers): Call method
debug_print_register.
(target_store_registers): Likewise.
Simon Marchi [Fri, 28 Apr 2017 21:16:16 +0000 (17:16 -0400)]
Class-ify lm_info_target
This patch makes lm_info_target a "real" class. It adds a destructor,
uses std::string, initializes the fields and replaces XCNEW/xfree with
new/delete.
gdb/ChangeLog:
* solib-target.c (struct lm_info_target): Add destructor,
initialize fields.
<name>: Change type to std::string.
(library_list_start_library): Allocate lm_info_target with new.
(solib_target_free_library_list): Free lm_info_target with
delete.
(solib_target_current_sos): Adapt to std::string.
(solib_target_free_so): Free lm_info_target with delete.
Simon Marchi [Fri, 28 Apr 2017 21:16:14 +0000 (17:16 -0400)]
Class-ify lm_info_aix
This patch makes lm_info_aix a "real" class. It uses std::string,
initializes fields in-class and replaces XCNEW/xfree with new/delete.
The solib_aix_new_lm_info can be replaced by using the default copy
constructor.
gdb/ChangeLog:
* solib-aix.c (struct lm_info_aix): Initialize fields in-class.
<filename, member_name>: Change type to std::string.
(solib_aix_new_lm_info, solib_aix_xfree_lm_info): Remove.
(library_list_start_library): Allocate lm_info_aix with new.
(solib_aix_free_library_list, solib_aix_free_so): Free with delete.
(solib_aix_current_sos): Adapt to std::string, copy lm_info_aix
with copy constructor.
Simon Marchi [Fri, 28 Apr 2017 21:16:13 +0000 (17:16 -0400)]
Make various lm_info implementations inherit from a base class
The lm_info structure is used to store target specific information about
mapped libraries. It is currently defined as an opaque type in solist.h
and a pointer to it is included in solist, the target-agnostic object
representing a loaded shared library. Multiple targets define their own
implementation of lm_info.
In anticipation of using C++ stuff (e.g. vector) in the lm_info objects,
we first need to avoid different definitions of classes with the same
name (which violates the one definition rule). This patch does it by
having a base class (lm_info_base) from which all the specific lm_info
derive. Each implementation is renamed to something that makes sense
(e.g. lm_info_aix for AIX). The next logical step would probably be to
derive directly from so_list, it's not really obvious, so I'll keep that
for another day.
One special case is the Neutrino (nto) support. It uses SVR4-style
libraries, but overrides some methods. To do that, it needed to have
its own copy of SVR4's lm_info structure in nto-tdep.c, because it was
just not possible to put it in solib-svr4.h and include that file. Over
time, that copy got out of sync, which is still the case today. I can
only assume that the lm_addr function in nto-tdep.c is broken right now.
The first field of the old lm_info was a pointer (gdb_byte *), whereas
in the new lm_info it's an address in the inferior (CORE_ADDR). Trying
to use that field today probably results in a crash. With this
refactor, it's now possible to put lm_info_svr4 in solib-svr4.h and just
include it. I have adapted the code in nto-tdep.c to that it builds,
but it's probably not correct. Since I don't have the knowledge nor
setup to try this on Neutrino, somebody else would have to fix it. But
I am confident that I am not making things worse than they already are.
Simon Marchi [Fri, 28 Apr 2017 21:16:12 +0000 (17:16 -0400)]
Standardize darwin's lm_info
Darwin's lm_info structure is used a little bit differently than the
other solib implementations. The other implementations first allocate
an so_list object, then instanciate their specific lm_info structure,
and assign it to so_list::lm_info.
The Darwin implementation allocates both at the same time
(darwin_so_list). This patch changes it to be like the others, so that
we'll be able to do some generalizations later.
gdb/ChangeLog:
* solib-darwin.c (struct darwin_so_list): Remove.
(darwin_current_sos): Allocate an so_list object instead of a
darwin_so_list, separately allocate an lm_info object.
(darwin_free_so): Free lm_info.
Nick Clifton [Fri, 28 Apr 2017 09:28:04 +0000 (10:28 +0100)]
Fix heap-buffer overflow bugs caused when dumping debug information from a corrupt binary.
PR binutils/21438
* dwarf.c (process_extended_line_op): Do not assume that the
string extracted from the section is NUL terminated.
(fetch_indirect_string): If the string retrieved from the section
is not NUL terminated, return an error message.
(fetch_indirect_line_string): Likewise.
(fetch_indexed_string): Likewise.
Keith Seitz [Thu, 27 Apr 2017 22:55:26 +0000 (15:55 -0700)]
Fix overload resolution involving rvalue references and cv qualifiers.
The following patch fixes several outstanding overload resolution problems
with rvalue references and cv qualifiers in the test suite. The tests for
these problems typically passed with one compiler version and failed with
another. This behavior occurs because of the ordering of the overloaded
functions in the debug info. So the first best match "won out" over the
a subsequent better match.
One of the bugs addressed by this patch is the failure of rank_one_type to
account for type equality of two overloads based on CV qualifiers. This was
leading directly to problems evaluating rvalue reference overload quality,
but it is also highlighted in gdb.cp/oranking.exp, where two test KFAIL as
a result of this shortcoming.
I found the overload resolution code committed with the rvalue reference
patch (f9aeb8d49) needlessly over-complicated, and I have greatly simplified
it. This fixes some KFAILing tests in gdb.exp/rvalue-ref-overload.exp.
* gdb.cp/oranking.cc (test15): New function.
(main): Call test15 and declare additional variables for testing.
* gdb.cp/oranking.exp: Remove kfail status for "p foo4(&a)" and
"p foo101('abc')" tests.
* gdb.cp/rvalue-ref-overloads.exp: Remove kfail status for
"lvalue reference overload" test.
* gdb.cp/rvalue-ref-params.exp: Remove kfail status for
"print value of f1 on Child&& in f2" test.
Simon Marchi [Thu, 27 Apr 2017 21:03:20 +0000 (17:03 -0400)]
Add missing incref when creating Inferior Python object
The test py-inferior.exp fails when using a debug build of Python 3.6. I don't
see it failing with my system's default Python, but it might be related to the
different memory allocation scheme used when doing a build with pydebug.
The issue is that we are missing a Py_INCREF in
inferior_to_inferior_object. The PyObject_New function initializes the
object with a refcount of 1. If we assume that this refcount
corresponds to the reference we are returning, then we are missing an
incref for the reference in the inferior data.
The counterpart for the incref that corresponds to the reference in the
inferior data is in py_free_inferior, in the form the gdbpy_ref instance.
Here's how I can get it to crash (with some debug output):
Current thread 0x00007f9cf1b68780 (most recent call first):
File "<string>", line 1 in <module>
[1] 408 abort (core dumped) ./gdb -nx -ex "set debug python 1"
After having created the inferiors object, their refcount is 1 (which
comes from PyObject_New), but it should be two. The gdb inferior object
has a reference and the "infs" list has a reference.
When invoking remove-inferiors, py_free_inferior gets called. It does
the decref that corresponds to the reference that the gdb inferior
object kept. At this moment, the refcount drops to 0 and the object
gets deallocated, even though the "infs" list still has a reference.
When we set "infs" to None, Python tries to decref the already zero
refcount and the assert triggers.
H.J. Lu [Thu, 27 Apr 2017 20:55:31 +0000 (13:55 -0700)]
x86: Create dynamic sections in create_dynamic_sections
This patch creates dynamic sections in i386/x86-64 create_dynamic_sections
instead of creating them on demend. Linker will strip them if they are
empty. It changes order in x86-64 .eh_frame section. The extra DW_CFA_nop
paddings is due to
H.J. Lu [Thu, 27 Apr 2017 16:07:23 +0000 (09:07 -0700)]
Change _bfd_elf_link_setup_gnu_properties to bfd *
Change setup_gnu_properties to return the first relocatable ELF input
with GNU properties so that a backend can make decision based on GNU
properties.
* elf-bfd.h (elf_backend_data): Change setup_gnu_properties
to return bfd *.
(_bfd_elf_link_setup_gnu_properties): Return bfd *.
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Return
the first relocatable ELF input with GNU properties.
Fix handling of XCOFF function auxiliary entries, in particular when
the xlc -qfuncsect or gcc -ffunction-sections compiler option is used
in AIX. Also handle C_WEAKEXT storage class.
* xcoffread.c (read_xcoff_symtab): Read correct function auxiliary
entry if xlc -qfuncsect or gcc -ffunction-sections compiler option
is used in AIX.
(read_xcoff_symtab): Handle C_WEAKEXT storage class.
(process_xcoff_symbol): Likewise.
(scan_xcoff_symtab): Likewise.
MIPS16/GAS: Factor out duplicate symbol value conversion code
Factor out and consolidate duplicate section-relative to PC-relative
symbol value conversion in `mips16_extended_frag' and `md_convert_frag'
used for MIPS16 relaxation, observing that the final calculation in the
latter function implies `stretch == 0'. Sanitize the formatting of code
moved.
gas/
* config/tc-mips.c (mips16_pcrel_val): New function, factored
out from...
(mips16_extended_frag): ... here.
(md_convert_frag): Use `mips16_pcrel_val' rather than repeated
code in MIPS16 relaxation, with `stretch' hardcoded to 0.
MIPS16/GAS: Rename the LONG_BRANCH relaxation flag
Following commit 177b4a6ad004 ("infinite loop in mips16 assembler
relaxation"), <https://sourceware.org/ml/binutils/2002-03/msg00345.html>
the LONG_BRANCH flag used in MIPS16 relaxation has lost its use for
branches. Complement commit 88a7ef168927 ("MIPS16/GAS: Restore
unsupported relocation diagnostics") then, which has removed the remains
of code deactivated by the former commit, and rename the flag to
ALWAYS_EXTENDED, more accurately reflecting its current use to select
the extended form of PC-relative ADDIU, DADDIU, LD and LW instructions.
projects / thirdparty / binutils-gdb.git / log
