Arnd Bergmann [Mon, 9 May 2022 21:46:17 +0000 (23:46 +0200)]
Merge tag 'imx-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.19:
- New board support: Engicam i.Core MX8M Plus SoM and EDIMM2.2 Starter
Kit, Toradex Verdin i.MX8M Plus devices, Data Modul i.MX8M Mini eDM SBC,
Verdin based MX8Menlo, 8MNANOD3L EVK, i.MX8M Plus Gateworks GW7400.
- Enable RTS-CTS on UART3 for imx8mm-beacon and imx8mn-beacon boards.
- Enable HS400-ES support for i.MX8MN and i.MX8MP uSDHC devices by
updating the compatible.
- A few updates on imx8mq-librem5 to increase boost regulation
current, add panel compatible for r4 ("Evergreen") revision and volume
buttons a wakeup source.
- Clean up vendor specific 'fsl,uart-has-rtscts' property by using
standard 'uart-has-rtscts'.
- Add GPC, GPU, MEDIAMIX, and HSIO power domains for i.MX8M Plus SoC.
- A series from Marcel Ziswiler to improve imx8mm-verdin support,
including cosmetic changes and functional improvements like SD1 sleep
pinctrl and fully validated IOMUX configuration.
- Add PWM polarity inversion support for i.MX8 SoCs.
- A couple of changes from Michael Walle to update PMIC output names and
min/max voltages for imx8mn-evk board.
- A series from Tim Harvey to improve imx8mm-venice boards, add missing
uart-has-rtscts property to UARTs, clock-names to pcie_phy, and
vdd_5p0 ADC channel.
- Add VPU codec devices for i.MX8QXP SoC.
- Other small and random changes.
* tag 'imx-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (65 commits)
arm64: dt: imx8mp: support pwm polarity inversion
arm64: dt: imx8mn: support pwm polarity inversion
arm64: dt: imx8mm: support pwm polarity inversion
arm64: dt: imx8mq: support pwm polarity inversion
arm64: dts: imx8mm-venice-gw7901: remove unnecessary cpu temp override
arm64: dts: imx8mm-venice-gw7902: add vdd_5p0 ADC channel
arm64: dts: imx8m*venice: add missing clock-names to pcie_phy
arm64: dts: imx8mm-venice-gw7902: fix pcie bindings
arm64: dts: freescale: reduce the interrup-map-mask
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3
arm64: dts: imx8mm: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC
arm64: dts: imx8mm: Disable USB2 OC on Data Modul i.MX8M Mini eDM SBC
arm64: dts: imx8mm: Add CPLD on MX8Menlo board
arm64: dts: imx8mq-kontron-pitx-imx8m: Use the standard 'uart-has-rtscts'
arm64: dts: imx8mp-verdin: Use the standard 'uart-has-rtscts'
arm64: dts: imx8mp: Add MEDIA_BLK_CTRL
arm64: dts: imx8mp: Add MEDIAMIX power domains
arm64: dts: imx8mp: add HSIO power-domains
arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
...
Arnd Bergmann [Mon, 9 May 2022 21:43:09 +0000 (23:43 +0200)]
Merge tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX ARM device tree update for 5.19:
- New board support: PHYTEC phyGATE-Tauri-S, TQ-Systems MBa6UL,
LS1021A IoT board, Toradex Iris and Aster carrier, i.MX7D SMEGW01,
i.MXRT1050 EVK, Bosch ACC board.
- A series from Alexander Stein to update i.MX51 based digi-connectcore
board, regarding to DMA of UART devices, PMIC voltages, USB
vbus-supply and usbphy.
- A series of changes from David Jander and Oleksij Rempel to remove
prototype specific deprecated code not used in production from
i.MX6Q/DL Vicut1 board, and unify Vicut1 and Victgo variants to reduce
maintaining overhead.
- Quite some changes from different people to update imx6ull-colibri board
on various aspects, touchscreen, device tree overlays, NAND BCH geometry,
GPIO line names, FEC phy-supply, etc.
- A couple of changes from Fabio Estevam to switch imx6dl-plybas and
imx6ul-kontron-n6x1x-s to use standard 'uart-has-rtscts' property.
- A couple of patches from Li Yang to update IFC device compatible and
node name for LayerScape SoCs.
- Disable USB host to work around boot issue on imx6qdl-udoo board.
- A series from Max Krummenacher to update Colibri i.MX6DL device trees,
drop dedicated v1.1 DT, disable add-on accessories, cleanups, etc.
- Various random and small updates on i.MX28 and i.MX6 boards.
* tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
ARM: dts: imx6ull-colibri: improve pinctrl node names
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
ARM: dts: imx6ull-colibri: add/update some comments
ARM: dts: imx6ull-colibri: fix nand bch geometry
ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
ARM: dts: imx6ull-colibri: add gpio-line-names
ARM: dts: imx6ull-colibri: update device trees to support overlays
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
ARM: dts: imx6ull-colibri: add touchscreen device nodes
ARM: dts: imx6ull-colibri: add phy-supply to fec
ARM: dts: imx6ull-colibri: change touch i2c parameters
ARM: dts: imx6ull-colibri: use pull-down for adc pins
ARM: dts: Add bosch acc board
ARM: dts: imx: Add i.MXRT1050-EVK support
ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
ARM: dts: imx27: use new 'dma-channels' property
ARM: dts: imx6qdl-phytec: Add LED labels
ARM: dts: ls1021a: reduce the interrupt-map-mask
...
Arnd Bergmann [Mon, 9 May 2022 21:26:14 +0000 (23:26 +0200)]
Merge tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.19
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
* tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits)
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
arm64: dts: qcom: sc7280: eDP for herobrine boards
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller
arm64: dts: qcom: sm8350-duo2: enable battery charger
arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
arm64: dts: qcom: pm8350c: Add pwm support
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7180: Remove ipa interconnect node
arm64: dts: qcom: sc7280-idp: Enable GPI DMAs
arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels
arm64: dts: qcom: sc7280: Add GPI DMAengines
arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)
arm64: dts: qcom: db845c: Add support for MCP2517FD
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd
arm64: dts: qcom: sm8250: camss: Add CCI definitions
...
Arnd Bergmann [Mon, 9 May 2022 21:21:54 +0000 (23:21 +0200)]
Merge tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DT updates for v5.19
This contains a long overdue overhaul of the MSM8974 DeviceTrees,
aligning the style, structure and naming with what we've learned since
the introduction of this platform.
On top of this the Sony Rhine platform gained I2C masters, NFC and
pstore support and the Fairphone 2 gained touchscreen support.
For the new SDX65 platform reserved-memory nodes, rpmpd, SPMI, CPU
clocks, SDHCI controller, SMMU and TCSR mutex was added. As was the
initial DeviceTree for the related PMX65 PMIC.
MSM8226 gained VADC and RTC support and support for the ASUS ZenWatch 2
was added.
* tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocs
ARM: dts: qcom: msm8974-FP2: Configure charger
ARM: dts: qcom: msm8974-FP2: Add support for touchscreen
ARM: dts: qcom: sdx55: Remove ipa interconnect node
ARM: dts: qcom: msm8974: Add missing license headers
ARM: dts: qcom: msm8974-FP2: Add mmc* aliases
ARM: dts: qcom: msm8974-FP2: We're msm8974pro
ARM: dts: qcom-msm8974*: Remove unnecessary include
ARM: dts: qcom-msm8974-rhine: Add pstore node
ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts
ARM: dts: qcom-msm8974*: Clean up old GPIO declarations
ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI
ARM: dts: qcom-msm8974*: Enable IMEM unconditionally
ARM: dts: qcom-msm8974: Sort and clean up nodes
ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device
ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames
ARM: dts: qcom-msm8974pro: Use &labels
ARM: dts: qcom-msm8974-castor: Use &labels
ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs
ARM: dts: qcom-msm8974-klte: Use &labels
...
Arnd Bergmann [Mon, 9 May 2022 12:32:56 +0000 (14:32 +0200)]
Merge tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.19:
- Various board compatible additions to fsl.yaml.
- Update fsl-imx-dma bindings to deprecate '#dma-channels' and
'#dma-requests'.
- Add bindings for i.MX8MP HDMI and media block control.
- Add vendor prefix for Storopack.
* tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add bosch acc board
dt-bindings: arm: fsl: Add Storopack i.MX7D SMEGW01 board
dt-bindings: vendor-prefixes: Add prefix for Storopack
dt-bindings: dmaengine: fsl-imx: deprecate '#dma-channels' and '#dma-requests'
dt-bindings: arm: fsl: add toradex,colibri-imx6ull
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
dt-bindings: arm: fsl: add ls1021a-iot board
dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
dt-bindings: arm: Add i.MX8M Plus Gateworks GW74xx board
dt-bindings: arm: fsl: add IMX8MN DDR3L eval board
dt-bindings: arm: fsl: Add carriers for toradex,colibri-imx6dl
dt-bindings: arm: fsl: imx6dl-colibri: Drop dedicated v1.1 bindings
dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
dt-bindings: arm: Add i.MX53 based Menlo board comment
dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
dt-bindings: arm: fsl: add TQ Systems boards based on i.MX6UL(L)
dt-bindings: arm: Add Data Modul i.MX8M Mini eDM SBC
dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
Arnd Bergmann [Mon, 9 May 2022 12:19:13 +0000 (14:19 +0200)]
Merge tag 'ti-k3-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v5.19
New Features:
J721e:
* Enable DSS, DP, HDMI on J721e EVM and SK
AM62:
* MCAN, MCU GPIO, ECAP APWM, DMA, Etherent and several peripheral on AM62 SK EVM
AM64:
* Enable Wireless LAN support
Arnd Bergmann [Mon, 9 May 2022 12:12:12 +0000 (14:12 +0200)]
Merge tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
Keystone2 device tree updates for v5.19
* Cleanups for SPI NOR / flash
* tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: dts: keystone: Fix missing fallback and case in SPI NOR node compatible
ARM: dts: keystone: Align SPI NOR node name with dtschema
Marcel Ziswiler [Fri, 6 May 2022 13:24:15 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
The gpio-keys define module level wake-up pin functionality. Move it
from the carrier board dts file to the Som dtsi file.
While at it, also re-order the properties in the gpio-keys node
alphabetically and rename to sub-node from power to wakeup.
Add GPIO line names on module-level. Those are all GPIOs that a user
might use on his custom carrier board. If more meaningful names are
available on the carrier board, the user can overwrite the line names
in the carrier board-level device tree.
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
Due to many carrier boards pulling the usdhc1 signals up to 3.3 volt we
need to disable 1.8 volt signaling. Adding the no-1-8-v property
basically disables UHS-I modes by default.
Also pull-up the command and data lines to the +V3.3_1.8_SD rail and
set them to the 200 MHz speed grade (e.g. pinmux bits 7-6: meaning 11
SPEED_3_max_200MHz).
Explicitly specify a bus-width of <4> in the module-level device tree
include file and drop the no-1-8-v property from the carrier boards
device trees.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move all Atmel nodes from the board-level into the main module-level
device tree and prepare the device trees for use with Atmel MXT device
tree overlays. Also, add required pinmux groups.
The common scheme for pin groups in touch screen overlays is as follows:
- pinctrl_atmel_conn - SODIMM 106/107 pins for INT/RST signals (default)
- pinctrl_atmel_adap - SODIMM 28/30 pins for INT/RST signals.
This adds the proper phy-supply to the FEC. This supply is actually
switched by a clock that is now properly stated. This has the advantage
to add a delay for that particular regulator which is needed.
ARM: dts: imx6ull-colibri: use pull-down for adc pins
Disable the keeper and enable a 100k pull-down on the ADC pins as per
the following note in section 13.2 of the i.MX 6ULL Application
Processor Reference Manual, Rev. 1, 11/2017 [1]:
The keeper causes an undesired jump behavior in ADC. To avoid the
problem, disable keeper before starting ADC.
Arnd Bergmann [Fri, 6 May 2022 20:39:39 +0000 (22:39 +0200)]
Merge tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.19-rc1
This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.
* tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add missing DFLL reset on Tegra210
arm64: tegra: Add memory controller channels
arm64: tegra: Enable ASRC on various platforms
arm64: tegra: Add ASRC device on Tegra186 and later
arm64: tegra: Update PWM fan node name
arm64: tegra: Add node for Tegra234 CCPLEX cluster
arm64: tegra: Add QSPI controllers on Tegra234
arm64: tegra: Update SDMMC1/3 clock source for Tegra194
Arnd Bergmann [Fri, 6 May 2022 20:38:43 +0000 (22:38 +0200)]
Merge tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.19-rc1
Updates the memory controller bindings to properly validate the number
of entries in the reg and reg-names properties.
* tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Update validation for reg and reg-names
Arnd Bergmann [Fri, 6 May 2022 20:36:15 +0000 (22:36 +0200)]
Merge tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.19 (take two)
- Document support for the R-Car V4H SoC and the White Hawk
development board stack,
- Document support for the RZ/V2M SoC and the RZ/V2M Evaluation Kit
Board,
- Document SPI Multi I/O Bus Controller (RPC-IF) support for RZ/G2UL,
- Miscellaneous fixes and improvements.
* tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Move renesas,rzg2l-sysc from arm to soc
dt-bindings: memory: renesas,rpc-if: Document RZ/G2UL SoC
dt-bindings: arm: renesas: Document Renesas RZ/V2M SoC and EVK board
dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings
dt-bindings: reset: renesas,rst: Document r8a779g0 reset module
dt-bindings: arm: renesas: Document R-Car V4H White Hawk DT bindings
Arnd Bergmann [Fri, 6 May 2022 20:30:58 +0000 (22:30 +0200)]
Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19 (take two)
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
ARM: dts: r9a06g032: Add USB PHY DT support
ARM: dts: r9a06g032: Add internal PCI bridge node
ARM: dts: r9a06g032: Describe the RTC
arm64: dts: renesas: Add interrupt-names to CANFD nodes
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g054: Fix external clk node names
arm64: dts: renesas: r9a07g044: Fix external clk node names
ARM: dts: r9a06g032: Fix the NAND controller node
ARM: dts: r9a06g032: Fill the UART DMA properties
ARM: dts: r9a06g032: Describe the DMA router
ARM: dts: r9a06g032: Add the two DMA nodes
arm64: dts: renesas: Remove empty rgb output endpoints
...
Arnd Bergmann [Fri, 6 May 2022 20:23:41 +0000 (22:23 +0200)]
Merge tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19, part two
Align SPI NOR node names to DT schema and drop unused/undocumented
dma-channels/dma-requests.
* tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
ARM: dts: marvell: align SPI NOR node name with dtschema
ARM: dts: omap: align SPI NOR node name with dtschema
ARM: dts: nuvoton: align SPI NOR node name with dtschema
Arnd Bergmann [Fri, 6 May 2022 20:12:37 +0000 (22:12 +0200)]
Merge tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM64 DTS for v5.19
Align SPI NOR node names and freq-table-hz to DT schema. Drop
unused/undocumented dma-channels/dma-requests.
* tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: broadcom: drop useless 'dma-channels/requests' properties
arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties
arm64: dts: marvell: align SPI NOR node name with dtschema
arm64: dts: microchip: align SPI NOR node name with dtschema
arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS
Giulio Benetti [Tue, 11 Jan 2022 21:54:14 +0000 (16:54 -0500)]
ARM: dts: imx: Add i.MXRT1050-EVK support
The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 core.
The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
USB 2.0 OTG.
This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC
Phil Edworthy [Wed, 4 May 2022 09:44:56 +0000 (10:44 +0100)]
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
Details of the SoC can be found here:
https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-cortex-a-mpus/rzv2m-dual-cortex-a53-lpddr4x32bit-ai-accelerator-isp-4k-video-codec-4k-camera-input-fhd-display-output
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence update the compatible properties in various device nodes
to include family-specific compatible values for R-Car Gen4 instead of
R-Car Gen3:
- DMAC,
- (H)SCIF,
- I2C,
- IPMMU,
- WDT.
arm64: dts: renesas: Add interrupt-names to CANFD nodes
The Renesas R-Car CAN-FD Controller on R-Car Gen3 and RZ/G2 SoCs has two
interrupts. Add interrupt-names properties to all CAN-FD device nodes
to identify the individual interrupts, so we can make this property a
required property in the DT bindings.
Biju Das [Sun, 1 May 2022 11:29:25 +0000 (12:29 +0100)]
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
Setup a thermal zone driven by SoC temperature sensor.
Create passive trip points and bind them to CPUFreq cooling
device that supports power extension.
Based on the work done by Dien Pham <dien.pham.ry@renesas.com>
and others for r8a77990 SoC.
Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.
Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.
UART 0 to 2 do not have DMA support, while UART 3 to 7 do.
Fill the "dmas" and "dma-names" properties for each of these nodes.
Please mind that these nodes go through the dmamux node which will
redirect the requests to the right DMA controller. The first 4 cells of
the "dmas" properties will be transferred as-is to the DMA
controllers. The last 2 cells are consumed by the dmamux. Which means
cell 0 and 4 are almost redundant, one giving the controller request ID
and the other the dmamux channel which is a 1:1 translation of the
request IDs, shifted by 16 when pointing to the second DMA controller.
Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty rgb output endpoints
from SoC dtsi files, and declare them in the board dts instead.
Endpoints node must have a remote-endpoint property, as endpoints only
exist to model a link between ports. Drop the empty lvds endpoints from
SoC dtsi files, they should be instead declared in the board dts or in
overlays.
Biju Das [Fri, 29 Apr 2022 07:24:00 +0000 (08:24 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Enable USB2.0 support
Enable USB2.0 Host/Device support on RZ/G2UL SMARC EVK by
adding usb{0,1} pincontrol entries to the soc-pinctrl dtsi
and deleting the nodes which disabled it.
Biju Das [Fri, 29 Apr 2022 07:23:58 +0000 (08:23 +0100)]
arm64: dts: renesas: rzg2l-smarc: Move ssi0 and cpu sound_dai nodes from common dtsi
On RZ/G2{L,LC} SoM module, the wm8978 audio codec is connected to ssi0,
whereas on RZ/G2UL it is connected to ssi1. So move ssi0 and cpu
sound_dai nodes from common dtsi to board specific dtsi.
Stephen Boyd [Wed, 27 Apr 2022 02:03:39 +0000 (19:03 -0700)]
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
The SoC is always present on sc7180-trogdor.dtsi and thus we should
include it in the "generic" dtsi file for trogdor. Previously we had
removed it from there because we had to do the spi6/spi0 swizzle, so
each trogdor variant board had to include sc7180.dtsi and then
sc7180-trogdor.dtsi so that the latter dtsi file could modify the right
spi bus for EC and H1 properties that are common to all trogdor boards.
Now that we're done with that we can replace sc7180.dtsi includes with
sc7180-trogdor.dtsi and include sc7180.dtsi in sc7180-trogdor.dtsi as
was originally intended. We still need to include sc7180-trogdor.dtsi
before the bridge dtsi files though because those rely on the panel
label.
Cc: "Joseph S. Barrera III" <joebar@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427020339.360855-4-swboyd@chromium.org
We had to do this spi0/spi6 flip-flop on trogdor-r0 because the spi
buses got swizzled between r0 and r1. The swizzle stopped after r1, but
we kept this around to support either hardware possibility and to keep
trogdor-r0 working.
trogdor-r0 isn't supported upstream, so this swizzle is not doing
anything besides making a pattern that others tryt to copy for the EC and
H1 nodes. Let's remove it and simplify the dts files.
Cc: "Joseph S. Barrera III" <joebar@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427020339.360855-3-swboyd@chromium.org
Trogdor boards with a detachable keyboard don't have a trackpad over
i2c. Instead the trackpad is on the detachable keyboard base. Let's move
the enabling of the trackpad i2c bus out of the base sc7180-trogdor.dtsi
file so that each trogdor board that is detachable, of which there are
many, doesn't have to disable the trackpad bus.
Cc: "Joseph S. Barrera III" <joebar@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427020339.360855-2-swboyd@chromium.org
Douglas Anderson [Tue, 26 Apr 2022 19:41:03 +0000 (12:41 -0700)]
arm64: dts: qcom: sc7280: eDP for herobrine boards
Add eDP support to herobrine boards, splitting up amongst the
different files as makes sense. Rationale for the current split of
things:
* The eDP connector itself is on qcard. However, not all devices with
a qcard will use an eDP panel. Some might use MIPI and, presumably,
someone could build a device with qcard that had no display at all.
* The qcard provides a PWM for backlight that goes to the eDP
connector. This PWM is also provided to the board and it's expected
that it would be used as the backlight PWM even for herobrine
devices with MIPI displays.
* It's currently assumed that all herobrine boards will have some sort
of display, either MIPI or eDP (but not both).
* We will assume herobrine-rev1 has eDP. The schematics allow for a
MIPI panel to be hooked up but, aside from some testing, nobody is
doing this and most boards don't have all the parts stuffed for
it. The two panels would also share a PWM for backlight, which is
weird.
* herobrine-villager and herobrine-hoglin (crd) also have eDP.
* herobrine-hoglin (crd) has slightly different regulator setup for
the backlight. It's expected that this is unique to this board. See
comments in the dts file.
* There are some regulators that are defined in the qcard schematic
but provided by the board like "vreg_edp_bl" and
"vreg_edp_3p3". While we could put references to these regulators
straight in the qcard.dtsi file, this would force someone using
qcard that didn't provide those regulators to provide a dummy or do
an ugly /delete-node/. Instead, we'll add references in
herobrine.dtsi.
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
Fix the issues seen with ethernet traffic getting stalled on SA8155p-ADP
board with default (or larger) mtu size of 1500 bytes, by disabling
multiple Tx and Rx queues for the stmmac IP block.
With the single queue setup, the ethernet traffic is stable,
wget / curl can work well on the board and no ethernet stall is
observed even when longer netperf / iperf3 test are run. Also
a performance of ~940 Mbits/sec is observed on the 1G link, so
there is no observable degradation in performance as well.
Rahul T R [Thu, 5 May 2022 09:07:09 +0000 (14:37 +0530)]
arm64: dts: ti: k3-j721e-sk: Enable HDMI
Add node for dvi bridge and the endpoint nodes to
describe connection from
DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector.
Also add the required pinmux for HDMI hotplug and
powerdown
Arnd Bergmann [Thu, 5 May 2022 14:48:55 +0000 (16:48 +0200)]
Merge tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:
- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
BCM283x (Raspberry Pi 1/2/3) platforms
- Kuldeep fixes the PL022 SPI controller clock names to conform to the
binding
- Rafal updates the various BCM5301X (Northstar) Device Tree include
files to be dtsschema conforming for pinctrl, NAND
- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
properties of the Ethernet switch DT node, populates the correct PHY
interface for port 5 of the switch, adds support for fetching the MAC
address from the NVMEM provider and finally disables gmac0 on that
device which is unused
- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
line names conforming to the printed circuit board layout
- Krzysztof updates various Broadcom DTS files to have a conforming SPI
nor Device Tree node
- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
wireless routers based on the BCM4708 SoC
- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
a basic DTS to boot upstream Linux on such a system
* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
ARM: dts: add dts files for bcmbca soc 47622
dt-bindings: arm: add bcmbca device tree binding document
ARM: dts: bcm283x: Align ETH_CLK GPIO line name
ARM: dts: bcm283x: Remove gpio line name NC
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
ARM: dts: broadcom: align SPI NOR node name with dtschema
dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
dt-bindings: arm: bcm: create new description for BCM53016
dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
ARM: dts: BCM5301X: Fix DTC warning for NAND node
ARM: dts: BCM5301X: Update pin controller node name
...
Arnd Bergmann [Thu, 5 May 2022 14:45:50 +0000 (16:45 +0200)]
Merge tag 'juno-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
Arm FVP/Juno device tree updates for v5.19
The main and bulk of the change is the addition of new platform
Arm corstone1000(both FVP and FPGA versions). Also, there are
addition of Coresight Cross Trigger Interface(CTI) support on Juno,
fix for incorrect SCMI power domain IDs, addition of virtio-rng
on FVP which is default disabled as it works only on latest versions
of the FVP model.
Other miscellanous changes include dropping of useless
'dma-channels/requests' properties and updating virtio device
node names as per dtschema.
* tag 'juno-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Drop useless 'dma-channels/requests' properties
arm64: dts: fvp: Align virtio device node names with dtschema
arm64: dts: fvp: Add virtio-rng support
arm64: dts: Add Arm corstone1000 platform support
dt-bindings: Add Arm corstone1000 platform
arm64: dts: juno: add CTI entries to device tree
arm64: dts: juno: Fix SCMI power domain IDs for ETF and CS funnel
Arnd Bergmann [Thu, 5 May 2022 14:44:18 +0000 (16:44 +0200)]
Merge tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
dt-bindings: soc: renesas: Move renesas,rzg2l-sysc from arm to soc
The Renesas RZ/{G2L,V2L} System Controller (SYSC) DT binding is not
really a power-related DT binding, hence it does not belong under
Documentation/devicetree/bindings/power/.
Move it to Documentation/devicetree/bindings/soc/renesas/.
Document RZ/G2UL RPC-IF bindings. RZ/G2UL RPC-IF is identical to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-rpc-if" will be used as a fallback.
Markus Niebel [Mon, 2 May 2022 09:49:01 +0000 (11:49 +0200)]
arm64: dt: imx8mp: support pwm polarity inversion
The i.MX8M Plus has the same PWM IP as i.MX6 / i.MX7. This IP
and the driver supporting pwm polarity inversion. Switch CPU
device tree fragment to use 3 pwm-cells.
Tested on MBa8MPxL mainboard.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 2 May 2022 09:49:00 +0000 (11:49 +0200)]
arm64: dt: imx8mn: support pwm polarity inversion
The i.MX8M Nano has the same PWM IP as i.MX6 / i.MX7. This IP
and the driver supporting pwm polarity inversion. Switch CPU
device tree fragment to use 3 pwm-cells.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 2 May 2022 09:48:59 +0000 (11:48 +0200)]
arm64: dt: imx8mm: support pwm polarity inversion
The i.MX8M Mini has the same PWM IP as i.MX6 / i.MX7. This IP
and the driver supporting pwm polarity inversion. Switch CPU
device tree fragment to use 3 pwm-cells and correct board
device trees.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 2 May 2022 09:48:58 +0000 (11:48 +0200)]
arm64: dt: imx8mq: support pwm polarity inversion
The i.MX8MQ has the same PWM IP as i.MX6 / i.MX7. This IP and the driver
supporting pwm polarity inversion. Switch CPU device tree fragment to
use 3 pwm-cells and correct board device trees.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the pcie bindings to the correct dt bindings:
pcie_phy:
- use pcie0_refclk
- add required clock-names
pcie:
- remove pcie_phy clock as it comes from phy driver
Mark Brown [Sun, 1 May 2022 17:47:13 +0000 (18:47 +0100)]
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
Attempting to boot my Udoo Dual and Quad with mainline hangs during boot
after printing:
[ 3.270471] imx_usb 2184000.usb: No over current polarity defined
[ 3.922502] mxs_phy 20c9000.usbphy: Data pin can't make good contact.
[ 3.940097] imx_usb 2184200.usb: No over current polarity defined
where imx_usb 2184200.usb is usbh1 in the DT. Adding debug prints to the
code seems to show that we lock up at the first read in usbmisc_imx6q_init()
which in combination with the above logging about the USB controllers
suggests that we lock up on the first read in usbmisc_imx6q_init(). Looking
at some of the other i.MX6 boards and the warning messages that are being
printed suggests that there is bitrot in the DTS for the device so disable
it for now, with it disabled the board boots successfully. Clearly this is
not a real fix, but it does allow some use of the board with mainline.
Similar behaviour is seen all the way back as far as v4.19, I tried going
back to when the board was added but had toolchain issues. Vendor provided
binaries seem fine on the boards so it seems likely that the hardware is
fine and the issue is with some combination of the DT and kernel. This
should obviously be resolved properly but for now this at least allows
the kernel to boot with reduced functionality on these systems.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>