Israel Batista [Wed, 29 Oct 2025 19:56:28 +0000 (19:56 +0000)]
mm: convert memory block states (MEM_*) macros to enum
Patch series "mm: Convert memory block states (MEM_*) macros to enums", v2.
The MEM_* constants indicating the state of a memory block are currently
defined as macros, meaning their definitions will be omitted from the
debuginfo on most kernel builds. This makes it harder for debuggers to
correctly map the block state at runtime, which can be quite useful when
analysing errors related to memory hot plugging and unplugging with tools
such as drgn.
Converting the constants to an enum ensures the correct information is
emitted by the compiler and available for the debugger, without needing to
hard-code them into the debugger and track their changes.
This patch series aims to replace the current macros with a newly created
enum named memory_block_state, while also taking advantage of the compile
time guarantees that we get when using enums.
The first patch does the conversion of the macros to an enum, while the
2nd and 3rd patches use this enum to clean up some type declarations and
make sure that only valid values are used.
This patch (of 3):
Converting the MEM_* constants from macros to an enum ensures that their
values will be correctly emitted in the debug symbols, making it easier to
trace the meaning of each value when debugging with tools such as drgn,
without the need to hard-code the values.
Since the values are mutually exclusive and they are not exposed directly
to userspace, I also dropped the misleading pattern (1<<X) that made it
look like they were combinable flags.
Baoquan He [Tue, 28 Oct 2025 03:43:08 +0000 (11:43 +0800)]
mm/swap: select swap device with default priority round robin
Swap devices are assumed to have similar accessing speed when swapon if no
priority is specified. It's unfair and doesn't make sense just because
one swap device is swapped on firstly, its priority will be higher than
the one swapped on later.
Here, set all swap devicess to have priority '-1' by default. With this
change, swap device with default priority will be selected round robin
when swapping out. This can improve the swapping efficiency a lot among
multiple swap devices with default priority.
Below are swapon output during the processes when high pressure
vm-scability test is being taken:
1) This is pre-commit a2468cc9bfdf, swap device is selectd one by one by
priority from high to low when one swap device is exhausted:
------------------------------------
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
2) This is behaviour with commit a2468cc9bfdf, on node, swap device
sharing the same node id is selected firstly until exhausted; while
on node no swap device sharing the node id it selects the one with
highest priority until exhaustd:
------------------------------------
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
3) After this patch applied, swap devices with default priority are selectd
round robin:
------------------------------------
[root@hp-dl385g10-03 block]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 6.6G -1
/dev/zram1 partition 16G 6.6G -1
/dev/zram2 partition 16G 6.6G -1
/dev/zram3 partition 16G 6.6G -1
With the change, about 18% efficiency promotion relative to node based
way as below. (Surely, the pre-commit a2468cc9bfdf way is the worst.)
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
one by one: node based: round robin:
System time: 1087.38 s 637.92 s 526.74 s (lower is better)
Sum Throughput: 2036.55 MB/s 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 65.69 MB/s 114.40 MB/s 135.72 MB/s (high is better)
free latency: 15769409.48 us 10138455.99 us 6810119.01 us(lower is better)
Link: https://lkml.kernel.org/r/20251028034308.929550-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Barry Song <baohua@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baoquan He [Tue, 28 Oct 2025 03:43:07 +0000 (11:43 +0800)]
mm/swap: do not choose swap device according to numa node
Patch series "mm/swapfile.c: select swap devices of default priority round
robin", v5.
Currently, on system with multiple swap devices, swap allocation will
select one swap device according to priority. The swap device with the
highest priority will be chosen to allocate firstly.
People can specify a priority from 0 to 32767 when swapon a swap device,
or the system will set it from -2 then downwards by default. Meanwhile,
on NUMA system, the swap device with node_id will be considered first on
that NUMA node of the node_id.
In the current code, an array of plist, swap_avail_heads[nid], is used to
organize swap devices on each NUMA node. For each NUMA node, there is a
plist organizing all swap devices. The 'prio' value in the plist is the
negated value of the device's priority due to plist being sorted from low
to high. The swap device owning one node_id will be promoted to the front
position on that NUMA node, then other swap devices are put in order of
their default priority.
E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as
swap devices.
Current behaviour:
their priorities will be(note that -1 is skipped):
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 0B -2
/dev/zram1 partition 16G 0B -3
/dev/zram2 partition 16G 0B -4
/dev/zram3 partition 16G 0B -5
And their positions in the 8 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
zram1 -> zram0 -> zram2 -> zram3
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
zram2 -> zram0 -> zram1 -> zram3
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
zram3 -> zram0 -> zram1 -> zram2
prio:1 prio:2 prio:3 prio:4
swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:2 prio:3 prio:4 prio:5
The adjustment for swap device with node_id intended to decrease the
pressure of lock contention for one swap device by taking different swap
device on different node. The adjustment was introduced in commit a2468cc9bfdf ("swap: choose swap device according to numa node").
However, the adjustment is a little coarse-grained. On the node, the swap
device sharing the node's id will always be selected firstly by node's
CPUs until exhausted, then next one. And on other nodes where no swap
device shares its node id, swap device with priority '-2' will be selected
firstly until exhausted, then next with priority '-3'.
This is the swapon output during the process high pressure vm-scability
test is being taken. It's clearly showing zram0 is heavily exploited
until exhausted.
===================================
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
The node based strategy on selecting swap device is much better then the
old way one by one selecting swap device. However it is still
unreasonable because swap devices are assumed to have similar accessing
speed if no priority is specified when swapon. It's unfair and doesn't
make sense just because one swap device is swapped on firstly, its
priority will be higher than the one swapped on later.
So in this patchset, change is made to select the swap device round robin
if default priority. In code, the plist array swap_avail_heads[nid] is
replaced with a plist swap_avail_head which reverts commit a2468cc9bfdf.
Meanwhile, on top of the revert, further change is taken to make any
device w/o specified priority get the same default priority '-1'. Surely,
swap device with specified priority are always put foremost, this is not
impacted. If you care about their different accessing speed, then use
'swapon -p xx' to deploy priority for your swap devices.
New behaviour:
swap_avail_list: /* one global available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:1 prio:1 prio:1
This is the swapon output during the process high pressure vm-scability
being taken, all is selected round robin:
=======================================
[root@hp-dl385g10-03 linux]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 12.6G -1
/dev/zram1 partition 16G 12.6G -1
/dev/zram2 partition 16G 12.6G -1
/dev/zram3 partition 16G 12.6G -1
With the change, we can see about 18% efficiency promotion as below:
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
Before: After:
System time: 637.92 s 526.74 s (lower is better)
Sum Throughput: 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 114.40 MB/s 135.72 MB/s (higher is better)
free latency: 10138455.99 us 6810119.01 us (low is better)
This patch (of 2):
This reverts commit a2468cc9bfdf ("swap: choose swap device according to
numa node").
After this patch, the behaviour will change back to pre-commit a2468cc9bfdf. Means the priority will be set from -1 then downwards by
default, and when swapping, it will exhault swap device one by one
according to priority from high to low. This is preparation work for
later change.
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
Jiayuan Chen [Mon, 27 Oct 2025 14:18:17 +0000 (22:18 +0800)]
mm: vmstat: output reserved_highatomic and free_highatomic in zoneinfo
The nr_free_highatomic is a key factor in calculating watermarks as it
affects the free pages count. Adding this metric, along with
nr_reserved_highatomic, to /proc/zoneinfo facilitates easier diagnosis
memory watermark calculations and memory pressure states.
INVALID_PHYS_ADDR has very similar definitions across the code base.
Hence just move that inside header <liux/mm.h> for more generic usage.
Also drop the now redundant ones which are no longer required.
Harry Yoo [Fri, 24 Oct 2025 11:30:46 +0000 (20:30 +0900)]
MAINTAINERS: add include/linux/pgalloc.h to MM CORE section
Patch series "mm: MISC follow-up patches for linux/pgalloc.h", v2.
This is a follow-up patch series for the patch series named: "[PATCH V5
mm-hotfixes 0/3] mm, x86: fix crash due to missing page table sync and
make it harder to miss".
This patch (of 2):
Since include/linux/pgtable.h is already listed in the MM CORE section,
add it to the section as well to keep it maintained by the appropriate
maintainers.
Link: https://lkml.kernel.org/r/20251024113047.119058-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20251024113047.119058-2-harry.yoo@oracle.com Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:33 +0000 (18:25 -0700)]
selftests/damon/sysfs: add obsolete_target test
A new DAMON sysfs file for pin-point target removal, namely
obsolete_target, has been added. Add a test for the functionality. It
starts DAMON with three monitoring target processes, mark one in the
middle as obsolete, commit it, and confirm the internal DAMON status is
updated to remove the target in the middle.
Link: https://lkml.kernel.org/r/20251023012535.69625-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:32 +0000 (18:25 -0700)]
sysfs.py: extend assert_ctx_committed() for monitoring targets
assert_ctx_committed() is not asserting monitoring targets commitment,
since all existing callers of the function assume no target changes.
Extend it for future usage.
Link: https://lkml.kernel.org/r/20251023012535.69625-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A new field of damon_target for pin-point target removal, namely obsolete,
has newly been added. Extend drgn_dump_damon_status.py to dump it, for
easily writing a future DAMON selftests of it.
Link: https://lkml.kernel.org/r/20251023012535.69625-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:30 +0000 (18:25 -0700)]
selftests/damon/_damon_sysfs: support obsolete_target file
A DAMON sysfs file, namely obsolete_target, has been newly introduced.
Add a support of that file to _damon_sysfs.py so that DAMON selftests for
the file can be easily written.
Link: https://lkml.kernel.org/r/20251023012535.69625-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:27 +0000 (18:25 -0700)]
mm/damon/sysfs: implement obsolete_target file
There is no good way to remove DAMON targets in the middle of the existing
targets list. It restricts efficient and flexible DAMON use cases.
Improve the usability by implementing a new DAMON sysfs interface file,
namely obsolete_target, under each target directory. It is connected to
the obsolete field of parameters commit-source targets, so allows removing
arbitrary targets in the middle of existing targets list.
Note that the sysfs files are not automatically updated. For example,
let's suppose there are three targets in the running context, and a user
removes the third target using this feature. If the user writes 'commit'
to the kdamond 'state' file again, DAMON sysfs interface will again try to
remove the third target. But because there is no matching target in the
running context, the commit will fail. It is the user's responsibility to
understand resulting DAMON internal targets list change, and construct
sysfs files (using nr_targets and other sysfs files) to correctly
represent it.
Also note that this is arguably an improvement rather than a fix of broken
things.
Link: https://lkml.kernel.org/r/20251023012535.69625-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Bijan Tabatabai <bijan311@gmail.com> Closes: https://github.com/damonitor/damo/issues/36 Reviewed-by: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:26 +0000 (18:25 -0700)]
mm/damon/sysfs: test commit input against realistic destination
DAMON sysfs interface tests if given online parameters update request is
valid, by committing those using the DAMON kernel API, to a test-purpose
destination context. The test-purpose destination context is constructed
using damon_new_ctx(), so it has no target, no scheme.
If a source target has the obsolete field set, the test-purpose commit
will fail because damon_commit_targets() fails when there is a source
obsolete target that cannot find its matching destination target. DAMON
sysfs interface is not letting users set the field for now, so there is no
problem. However, the following commit will support that. Also there
could be similar future changes that making commit fails based on current
context structure.
Make the test purpose commit destination context similar to the current
running one, by committing the running one to the test purpose context,
before doing the real test-purpose commit.
Link: https://lkml.kernel.org/r/20251023012535.69625-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Thu, 23 Oct 2025 01:25:25 +0000 (18:25 -0700)]
mm/damon/core: add damon_target->obsolete for pin-point removal
Patch series "mm/damon: support pin-point targets removal".
DAMON maintains the targets in a list, and allows committing only an
entire list of targets having the new parameters. Targets having same
index on the lists are treated as matching source and destination
targets. If an existing target cannot find a matching one in the
sources list, the target is removed. This means that there is no way to
remove only a specific monitoring target in the middle of the current
targets list.
Such pin-point target removal is really needed in some use cases,
though. Monitoring access patterns on virtual address spaces of
processes that spawned from the same ancestor is one example. If a
process of the group is terminated, the user may want to remove the
matching DAMON target as soon as possible, to save in-kernel memory
usage for the unnecessary target data. The user may also want to do
that without turning DAMON off or removing unnecessary targets, to keep
the current monitoring results for other active processes.
Extend DAMON kernel API and sysfs ABI to support the pin-point removal
in the following way. For API, add a new damon_target field, namely
'obsolete'. If the field on parameters commit source target is set, it
means the matching destination target is obsolete. Then the parameters
commit logic removes the destination target from the existing targets
list. For sysfs ABI, add a new file under the target directory, namely
'obsolete_target'. It is connected with the 'obsolete' field of the
commit source targets, so internally using the new API.
Also add a selftest for the new feature. The related helper scripts for
manipulating the sysfs interface and dumping in-kernel DAMON status are
also extended for this. Note that the selftest part was initially
posted as an individual RFC series [1], but now merged into this one.
Bijan Tabatabai has originally reported this issue, and participated in
this solution design on a GitHub issue [1] for DAMON user-space tool.
This patch (of 9):
DAMON's monitoring targets parameters update function,
damon_commit_targets(), is not providing a way to remove a target in the
middle of the existing targets list. Extend the API by adding a field to
struct damon_target. If the field of a damon_commit_targets() source
target is set, it indicates the matching target on the existing targets
list is obsolete. damon_commit_targets() understands that and removes
those from the list, while respecting the index based matching for other
non-obsolete targets.
Link: https://lkml.kernel.org/r/20251023012535.69625-1-sj@kernel.org Link: https://lkml.kernel.org/r/20251023012535.69625-2-sj@kernel.org Link: https://github.com/damonitor/damo/issues/36 Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Bijan Tabatabai <bijan311@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry Ilvokhin [Thu, 23 Oct 2025 18:12:02 +0000 (18:12 +0000)]
mm: shmem/tmpfs hugepage defaults config choice
Allow to override defaults for shemem and tmpfs at config time. This is
consistent with how transparent hugepages can be configured.
Same results can be achieved with the existing
'transparent_hugepage_shmem' and 'transparent_hugepage_tmpfs' settings in
the kernel command line, but it is more convenient to define basic
settings at config time instead of changing kernel command line later.
Defaults for shmem and tmpfs were not changed. They are remained the same
as before: 'never' for both cases. Options 'deny' and 'force' are omitted
intentionally since these are special values and supposed to be used for
emergencies or testing and are not expected to be permanent ones.
Primary motivation for adding config option is to enable policy
enforcement at build time. In large-scale production environments (Meta's
for example), the kernel configuration is often maintained centrally close
to the kernel code itself and owned by the kernel engineers, while boot
parameters are managed independently (e.g. by provisioning systems). In
such setups, the kernel build defines the supported and expected behavior
in a single place, but there is no reliable or uniform control over the
kernel command line options.
A build-time default allows kernel integrators to enforce a predictable
hugepage policy for shmem/tmpfs on a base layer, ensuring reproducible
behavior and avoiding configuration drift caused by possible boot-time
differences.
In short, primary benefit is mostly operational: it provides a way to
codify preferred policy in the kernel configuration, which is versioned,
reviewed, and tested as part of the kernel build process, rather than
depending on potentially variable boot parameters.
[d@ilvokhin.com: v2] Link: https://lkml.kernel.org/r/aQECPpjd-fU_TC79@shell.ilvokhin.com Link: https://lkml.kernel.org/r/aPpv8sAa2sYgNu3L@shell.ilvokhin.com Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 26 Oct 2025 18:22:13 +0000 (11:22 -0700)]
Docs/admin-guide/mm/damon/stat: document negative idle time
Commit a983a26d5298 ("mm/damon/stat: expose negative idle time")
introduced the negative idle time feature for DAMON_STAT. But it is not
documented. Document it on the usage document.
Link: https://lkml.kernel.org/r/20251026182216.118200-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit cc7ceb1d14b0 ("mm/damon/stat: expose the current tuned aggregation
interval"), has introduced 'aggr_interval_us' parameter for DAMON_STAT.
But the new parameter is not yet documented. Document it on the usage
document for the module.
Link: https://lkml.kernel.org/r/20251026182216.118200-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2e0fe9245d6b ("mm/damon/lru_sort: support addr_unit for
DAMON_LRU_SORT") introduced the 'addr_unit' parameter for DAMON_LRU_SORT.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 7db551fcfb2a ("mm/damon/reclaim: support addr_unit for
DAMON_RECLAIM") introduced the 'addr_unit' parameter for DAMON_RECLAIM.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 26 Oct 2025 18:22:09 +0000 (11:22 -0700)]
Docs/admin-guide/mm/damon/usage: document empty target regions commit behavior
Committing a monitoring target with empty target regions is for keeping
the current monitoring results. This behavior was introduced by commit 973233600676 ("mm/damon/sysfs: update monitoring target regions for online
input commit"). The behavior is not documented, though. Update the usage
document for clarifying this behavior.
Link: https://lkml.kernel.org/r/20251026182216.118200-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 26 Oct 2025 18:22:07 +0000 (11:22 -0700)]
Docs/mm/damon/design: fix wrong link to intervals goal section
Commit b243d666d107 ("Docs/admin-guide/mm/damon/usage: add intervals_goal
directory on the hierarchy") mistakenly added a wrong reference for
intervals goal usage documentation on the design document. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 26 Oct 2025 18:22:06 +0000 (11:22 -0700)]
mm/damon/core: fix wrong comment of damon_call() return timing
Patch series "mm/damon: misc documentation fixups".
First three patches fix up issues in the documents, including wrong
explanation of a behavior, wrong link, and a contextual typo. Following
five patches update documents for not yet documented features and
behaviors.
This patch (of 8):
damon_call() works asynchronously and synchronously for repeat and
non-repeat mode requests, respectively. The comment about the behavior is
wrong, though. Fix it.
The wrong comment was introduced together with the repeat mode, by commit 43df7676e550 ("mm/damon/core: introduce repeat mode damon_call()").
Link: https://lkml.kernel.org/r/20251026182216.118200-1-sj@kernel.org Link: https://lkml.kernel.org/r/20251026182216.118200-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 23 Oct 2025 18:00:43 +0000 (02:00 +0800)]
mm, swap: remove redundant argument for isolating a cluster
The order argument was introduced by an intermediate commit and was then
never used, just remove it.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-5-a709469052e7@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 23 Oct 2025 18:00:42 +0000 (02:00 +0800)]
mm/migrate, swap: drop usage of folio_index
This helper was used when swap cache was mixed with page cache. Now they
are completely separate from each other, access to the swap cache is all
wrapped by the swap_cache_* helpers, which expect the folio's swap entry
as a parameter.
This helper is no longer used, remove the last redundant user and drop it.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-4-a709469052e7@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 23 Oct 2025 18:00:41 +0000 (02:00 +0800)]
mm, swap: cleanup swap entry allocation parameter
We no longer need this GFP parameter after commit 8578e0c00dcf ("mm, swap:
use the swap table for the swap cache and switch API"). Before that
commit the GFP parameter is already almost identical for all callers, so
nothing changed by that commit. Swap table just moved the GFP to lower
layer and make it more defined and changes depend on atomic or sleep
allocation.
Now this parameter is no longer used, just remove it. No behavior change.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-3-a709469052e7@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 23 Oct 2025 18:00:40 +0000 (02:00 +0800)]
mm, swap: rename helper for setup bad slots
The name inc_cluster_info_page is very confusing, as this helper is only
used during swapon to mark bad slots. Rename it properly and turn the
VM_BUG_ON in it into WARN_ON to expose more potential issues. Swapon is a
cold path, so adding more checks should be a good idea.
No feature change except new WARN_ON.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-2-a709469052e7@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 23 Oct 2025 18:34:11 +0000 (02:34 +0800)]
mm, swap: do not perform synchronous discard during allocation
Patch series "mm, swap: misc cleanup and bugfix", v2.
A few cleanups and a bugfix that are either suitable after the swap table
phase I or found during code review.
Patch 1 is a bugfix and needs to be included in the stable branch, the
rest have no behavioral change.
This patch (of 5):
Since commit 1b7e90020eb77 ("mm, swap: use percpu cluster as allocation
fast path"), swap allocation is protected by a local lock, which means we
can't do any sleeping calls during allocation.
However, the discard routine is not taken well care of. When the swap
allocator failed to find any usable cluster, it would look at the pending
discard cluster and try to issue some blocking discards. It may not
necessarily sleep, but the cond_resched at the bio layer indicates this is
wrong when combined with a local lock. And the bio GFP flag used for
discard bio is also wrong (not atomic).
It's arguable whether this synchronous discard is helpful at all. In most
cases, the async discard is good enough. And the swap allocator is doing
very differently at organizing the clusters since the recent change, so it
is very rare to see discard clusters piling up.
So far, no issues have been observed or reported with typical SSD setups
under months of high pressure. This issue was found during my code
review. But by hacking the kernel a bit: adding a mdelay(500) in the
async discard path, this issue will be observable with WARNING triggered
by the wrong GFP and cond_resched in the bio layer for debug builds.
So now let's apply a hotfix for this issue: remove the synchronous discard
in the swap allocation path. And when order 0 is failing with all cluster
list drained on all swap devices, try to do a discard following the swap
device priority list. If any discards released some cluster, try the
allocation again. This way, we can still avoid OOM due to swap failure if
the hardware is very slow and memory pressure is extremely high.
This may cause more fragmentation issues if the discarding hardware is
really slow. Ideally, we want to discard pending clusters before
continuing to iterate the fragment cluster lists. This can be implemented
in a cleaner way if we clean up the device list iteration part first.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-0-a709469052e7@tencent.com Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-1-c5b0e1092927@tencent.com Fixes: 1b7e90020eb7 ("mm, swap: use percpu cluster as allocation fast path") Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Tue, 21 Oct 2025 21:21:42 +0000 (21:21 +0000)]
mm/huge_memory: optimize old_order derivation during folio splitting
Folio splitting requires both the folio's original order (@old_order) and
the new target order (@split_order).
In the current implementation, @old_order is repeatedly retrieved using
folio_order().
However, for every iteration after the first, the folio being split is the
result of the previous split, meaning its order is already known to be
equal to the previous iteration's @split_order.
This commit optimizes the logic:
* Instead of calling folio_order(), we now set @old_order directly to
the value of @split_order from the previous iteration.
This change avoids unnecessary function calls and simplifies the loop
setup.
Also it removes a check for non-existent case, since for uniform splitting
we only do split when @split_order == @new_order.
Link: https://lkml.kernel.org/r/20251021212142.25766-5-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: wang lian <lianux.mm@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Tue, 21 Oct 2025 21:21:41 +0000 (21:21 +0000)]
mm/huge_memory: optimize and simplify folio stat update after split
The loop executed after a successful folio split currently has two
combined responsibilities:
* updating statistics for the new folios
* determining the folio for the next split iteration.
This commit refactors the logic to directly calculate and update folio
statistics, eliminating the need for the iteration step.
We can do this because all necessary information is already available:
* All resulting new folios have the same order, which is @split_order.
* The exact number of new folios can be calculated directly using
@old_order and @split_order.
* The folio for the subsequent split is simply the one containing
@split_at.
By leveraging this knowledge, we can achieve the stat update more cleanly
and efficiently without the looping logic.
Link: https://lkml.kernel.org/r/20251021212142.25766-4-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: wang lian <lianux.mm@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Tue, 21 Oct 2025 21:21:40 +0000 (21:21 +0000)]
mm/huge_memory: update folio stat after successful split
The current implementation complicates this process:
* It iterates over the resulting new folios.
* It uses a flag (@stop_split) to conditionally skip updating the stat
for the folio at @split_at during the loop.
* It then attempts to update the skipped stat on a subsequent failure
path.
This logic is unnecessarily hard to follow.
This commit refactors the code to update the folio statistics only after a
successful split. This makes the logic much cleaner and sets the stage
for further simplification of the stat-handling code.
Link: https://lkml.kernel.org/r/20251021212142.25766-3-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: wang lian <lianux.mm@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/huge_memory: cleanup __split_unmapped_folio()", v3.
This patch series cleans up and optimizes the internal logic of the
__split_unmapped_folio() function.
The goal is to improve clarity and efficiency by eliminating redundant
checks, caching stable attribute values, and simplifying the iteration
logic used for updating folio statistics.
These changes make the code easier to follow and maintain.
The split_huge_page_test selftest pass.
This patch (of 4):
During the execution of __split_unmapped_folio(), the folio's anon/!anon
attribute is invariant (not expected to change).
Therefore, it is safe and more efficient to retrieve this attribute once
at the start and reuse it throughout the function.
Lu Baolu [Wed, 22 Oct 2025 08:26:34 +0000 (16:26 +0800)]
iommu/sva: invalidate stale IOTLB entries for kernel address space
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-9-baolu.lu@linux.intel.com Link: https://lore.kernel.org/linux-iommu/04983c62-3b1d-40d4-93ae-34ca04b827e5@intel.com/ Co-developed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Jann Horn <jannh@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Wed, 22 Oct 2025 08:26:33 +0000 (16:26 +0800)]
mm: introduce deferred freeing for kernel page tables
This introduces a conditional asynchronous mechanism, enabled by
CONFIG_ASYNC_KERNEL_PGTABLE_FREE. When enabled, this mechanism defers the
freeing of pages that are used as page tables for kernel address mappings.
These pages are now queued to a work struct instead of being freed
immediately.
This deferred freeing allows for batch-freeing of page tables, providing a
safe context for performing a single expensive operation (TLB flush) for a
batch of kernel page tables instead of performing that expensive operation
for each page table.
Link: https://lkml.kernel.org/r/20251022082635.2462433-8-baolu.lu@linux.intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lu Baolu [Wed, 22 Oct 2025 08:26:32 +0000 (16:26 +0800)]
x86/mm: use pagetable_free()
The kernel's memory management subsystem provides a dedicated interface,
pagetable_free(), for freeing page table pages. Updates two call sites to
use pagetable_free() instead of the lower-level __free_page() or
free_pages(). This improves code consistency and clarity, and ensures the
correct freeing mechanism is used.
Link: https://lkml.kernel.org/r/20251022082635.2462433-7-baolu.lu@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Wed, 22 Oct 2025 08:26:30 +0000 (16:26 +0800)]
x86/mm: use 'ptdesc' when freeing PMD pages
There are a billion ways to refer to a physical memory address. One of
the x86 PMD freeing code location chooses to use a 'pte_t *' to point to a
PMD page and then call a PTE-specific freeing function for it. That's a
bit wonky.
Just use a 'struct ptdesc *' instead. Its entire purpose is to refer to
page table pages. It also means being able to remove an explicit cast.
Right now, pte_free_kernel() is a one-liner that calls
pagetable_dtor_free(). Effectively, all this patch does is remove one
superfluous __pa(__va(paddr)) conversion and then call
pagetable_dtor_free() directly instead of through a helper.
Link: https://lkml.kernel.org/r/20251022082635.2462433-5-baolu.lu@linux.intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Wed, 22 Oct 2025 08:26:29 +0000 (16:26 +0800)]
mm: actually mark kernel page table pages
Now that the API is in place, mark kernel page table pages just after they
are allocated. Unmark them just before they are freed.
Note: Unconditionally clearing the 'kernel' marking (via
ptdesc_clear_kernel()) would be functionally identical to what is here.
But having the if() makes it logically clear that this function can be
used for kernel and non-kernel page tables.
Link: https://lkml.kernel.org/r/20251022082635.2462433-4-baolu.lu@linux.intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Wed, 22 Oct 2025 08:26:28 +0000 (16:26 +0800)]
mm: add a ptdesc flag to mark kernel page tables
The page tables used to map the kernel and userspace often have very
different handling rules. There are frequently *_kernel() variants of
functions just for kernel page tables. That's not great and has lead to
code duplication.
Instead of having completely separate call paths, allow a 'ptdesc' to be
marked as being for kernel mappings. Introduce helpers to set and clear
this status.
Note: this uses the PG_referenced bit. Page flags are a great fit for
this since it is truly a single bit of information. Use PG_referenced
itself because it's a fairly benign flag (as opposed to things like
PG_lock). It's also (according to Willy) unlikely to go away any time
soon.
PG_referenced is not in PAGE_FLAGS_CHECK_AT_FREE. It does not need to be
cleared before freeing the page, and pages coming out of the allocator
should have it cleared. Regardless, introduce an API to clear it anyway.
Having symmetry in the API makes it easier to change the underlying
implementation later, like if there was a need to move to a
PAGE_FLAGS_CHECK_AT_FREE bit.
Link: https://lkml.kernel.org/r/20251022082635.2462433-3-baolu.lu@linux.intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lu Baolu [Wed, 22 Oct 2025 08:26:27 +0000 (16:26 +0800)]
iommu: disable SVA when CONFIG_X86 is set
Patch series "Fix stale IOTLB entries for kernel address space", v7.
This proposes a fix for a security vulnerability related to IOMMU Shared
Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel
page table entries. When a kernel page table page is freed and
reallocated for another purpose, the IOMMU might still hold stale,
incorrect entries. This can be exploited to cause a use-after-free or
write-after-free condition, potentially leading to privilege escalation or
data corruption.
This solution introduces a deferred freeing mechanism for kernel page
table pages, which provides a safe window to notify the IOMMU to
invalidate its caches before the page is reused.
This patch (of 8):
In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware
shares and walks the CPU's page tables. The x86 architecture maps the
kernel's virtual address space into the upper portion of every process's
page table. Consequently, in an SVA context, the IOMMU hardware can walk
and cache kernel page table entries.
The Linux kernel currently lacks a notification mechanism for kernel page
table changes, specifically when page table pages are freed and reused.
The IOMMU driver is only notified of changes to user virtual address
mappings. This can cause the IOMMU's internal caches to retain stale
entries for kernel VA.
Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when
kernel page table pages are freed and later reallocated. The IOMMU could
misinterpret the new data as valid page table entries. The IOMMU might
then walk into attacker-controlled memory, leading to arbitrary physical
memory DMA access or privilege escalation. This is also a
Write-After-Free issue, as the IOMMU will potentially continue to write
Accessed and Dirty bits to the freed memory while attempting to walk the
stale page tables.
Currently, SVA contexts are unprivileged and cannot access kernel
mappings. However, the IOMMU will still walk kernel-only page tables all
the way down to the leaf entries, where it realizes the mapping is for the
kernel and errors out. This means the IOMMU still caches these
intermediate page table entries, making the described vulnerability a real
concern.
Disable SVA on x86 architecture until the IOMMU can receive notification
to flush the paging cache before freeing the CPU kernel page table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-1-baolu.lu@linux.intel.com Link: https://lkml.kernel.org/r/20251022082635.2462433-2-baolu.lu@linux.intel.com Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yi Lai <yi1.lai@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Tue, 21 Oct 2025 23:44:25 +0000 (16:44 -0700)]
memcg: manually uninline __memcg_memory_event
__memcg_memory_event() has been unnecessarily marked inline even when it
is not really performance critical. It is usually called to track extreme
conditions. Over the time, it has evolved to include more functionality
and inlining it is causing more harm.
Before the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35645 10574 4192 50411 c4eb mm/memcontrol.o
54738 1658 0 56396 dc4c net/ipv4/tcp_input.o
34644 1065 0 35709 8b7d net/ipv4/tcp_output.o
After the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35137 10446 4192 49775 c26f mm/memcontrol.o
54322 1562 0 55884 da4c net/ipv4/tcp_input.o
34492 1017 0 35509 8ab5 net/ipv4/tcp_output.o
[akpm@linux-foundation.org: use EXPORT_SYMBOL_GPL for __memcg_memory_event, per Michal and Christoph] Link: https://lkml.kernel.org/r/20251021234425.1885471-1-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/vmalloc: request large order pages from buddy allocator
Sometimes, vm_area_alloc_pages() will want many pages from the buddy
allocator. Rather than making requests to the buddy allocator for at most
100 pages at a time, we can eagerly request large order pages a smaller
number of times.
We still split the large order pages down to order-0 as the rest of the
vmalloc code (and some callers) depend on it. We still defer to the bulk
allocator and fallback path in case of order-0 pages or failure.
Running 1000 iterations of allocations on a small 4GB system finds:
1000 2mb allocations:
[Baseline] [This patch]
real 46.310s real 0m34.582
user 0.001s user 0.006s
sys 46.058s sys 0m34.365s
10000 200kb allocations:
[Baseline] [This patch]
real 56.104s real 0m43.696
user 0.001s user 0.003s
sys 55.375s sys 0m42.995s
mm: remove reference to destructor in comment in calculate_sizes()
The commit that removed support for destructors from kmem_cache_alloc()
never removed the comment regarding destructors in the explanation of the
possible relocation of the free pointer in calculate_sizes().
Link: https://lkml.kernel.org/r/20251021110004.2209008-1-william.kucharski@oracle.com Fixes: 20c2df83d25c ("mm: Remove slab destructors from kmem_cache_create().") Signed-off-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Christoph Lameter (Ampere) <cl@gentwo.org> Acked-by: SeongJae Park <sj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Leon Hwang [Tue, 21 Oct 2025 13:44:31 +0000 (21:44 +0800)]
mm/khugepaged: factor out common logic in [scan,alloc]_sleep_millisecs_store()
Both scan_sleep_millisecs_store() and alloc_sleep_millisecs_store()
perform the same operations: parse the input value, update their
respective sleep interval, reset khugepaged_sleep_expire, and wake up the
khugepaged thread.
Factor out this duplicated logic into a helper function
__sleep_millisecs_store(), and simplify both store functions.
No functional change intended.
Link: https://lkml.kernel.org/r/20251021134431.26488-1-leon.hwang@linux.dev Signed-off-by: Leon Hwang <leon.hwang@linux.dev> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lance Yang <lance.yang@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Nico Pache <npache@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Swaraj Gaikwad [Tue, 21 Oct 2025 21:53:24 +0000 (21:53 +0000)]
mm/damon/sysfs: remove misleading todo comment in nid_show()
The TODO comment in nid_show() suggested returning an error if the goal
was not using nid. However, this comment was found to be inaccurate and
misleading.This patch removes the TODO comment without changing any
existing behavior.
This change follows feedback from SJ who pointed out [1] that wiring-order
independence is expected and the function should simply show the last set
value. and [2] checkpatch.pl complain about number of chars per line
No functional code changes were made.
Tested with KUnit:
- Built kernel with KUnit and DAMON sysfs tests enabled.
- Executed KUnit tests:
./tools/testing/kunit/kunit.py run --kunitconfig ./mm/damon/tests/
- All 25 tests passed, including damon_sysfs_test_add_targets.
mm/vmalloc: use kmalloc_array() instead of kmalloc()
The number of NUMA nodes (nr_node_ids) is bounded, so overflow is not a
practical concern here. However, using kmalloc_array() better reflects
the intent to allocate an array of unsigned ints, and improves consistency
with other NUMA-related allocations.
No functional change intended.
Link: https://lkml.kernel.org/r/20251018201207.27441-1-mehdi.benhadjkhelifa@gmail.com Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Khalid Aziz <khalid@kernel.org> Cc: David Hunter <david.hunter.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:32 +0000 (13:11 +0100)]
mm: update resctl to use mmap_prepare
Make use of the ability to specify a remap action within mmap_prepare to
update the resctl pseudo-lock to use mmap_prepare in favour of the
deprecated mmap hook.
Link: https://lkml.kernel.org/r/95b28b066f37ca25f56fa9460a9367f1a866f88b.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:31 +0000 (13:11 +0100)]
mm: update mem char driver to use mmap_prepare
Update the mem char driver (backing /dev/mem and /dev/zero) to use
f_op->mmap_prepare hook rather than the deprecated f_op->mmap.
The /dev/zero implementation has a very unique and rather concerning
characteristic in that it converts MAP_PRIVATE mmap() mappings anonymous
when they are, in fact, not.
The new f_op->mmap_prepare() can support this, but rather than introducing
a helper function to perform this hack (and risk introducing other users),
utilise the success hook to do so.
We utilise the newly introduced shmem_zero_setup_desc() to allow for the
shared mapping case via an f_op->mmap_prepare() hook.
We also use the desc->action_error_hook to filter the remap error to
-EAGAIN to keep behaviour consistent.
Link: https://lkml.kernel.org/r/48f60764d7a6901819d1af778fa33b775d2e8c77.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:29 +0000 (13:11 +0100)]
mm/hugetlbfs: update hugetlbfs to use mmap_prepare
Since we can now perform actions after the VMA is established via
mmap_prepare, use desc->action_success_hook to set up the hugetlb lock
once the VMA is setup.
We also make changes throughout hugetlbfs to make this possible.
Note that we must hide newly established hugetlb VMAs from the rmap until
the operation is entirely complete as we establish a hugetlb lock during
VMA setup that can be raced by rmap users.
Link: https://lkml.kernel.org/r/b1afa16d3cfa585a03df9ae215ae9f905b3f0ed7.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:28 +0000 (13:11 +0100)]
doc: update porting, vfs documentation for mmap_prepare actions
Now we have introduced the ability to specify that actions should be taken
after a VMA is established via the vm_area_desc->action field as specified
in mmap_prepare, update both the VFS documentation and the porting guide
to describe this.
Link: https://lkml.kernel.org/r/472ce3da7662ed1065cc299d14bffb70b1a845e7.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:27 +0000 (13:11 +0100)]
mm: add ability to take further action in vm_area_desc
Some drivers/filesystems need to perform additional tasks after the VMA is
set up. This is typically in the form of pre-population.
The forms of pre-population most likely to be performed are a PFN remap
or the insertion of normal folios and PFNs into a mixed map.
We start by implementing the PFN remap functionality, ensuring that we
perform the appropriate actions at the appropriate time - that is setting
flags at the point of .mmap_prepare, and performing the actual remap at the
point at which the VMA is fully established.
This prevents the driver from doing anything too crazy with a VMA at any
stage, and we retain complete control over how the mm functionality is
applied.
Unfortunately callers still do often require some kind of custom action,
so we add an optional success/error _hook to allow the caller to do
something after the action has succeeded or failed.
This is done at the point when the VMA has already been established, so
the harm that can be done is limited.
The error hook can be used to filter errors if necessary.
There may be cases in which the caller absolutely must hold the file rmap
lock until the operation is entirely complete. It is an edge case, but
certainly the hugetlbfs mmap hook requires it.
To accommodate this, we add the hide_from_rmap_until_complete flag to the
mmap_action type. In this case, if a new VMA is allocated, we will hold the
file rmap lock until the operation is entirely completed (including any
success/error hooks).
Note that we do not need to update __compat_vma_mmap() to accommodate this
flag, as this function will be invoked from an .mmap handler whose VMA is
not yet visible, so we implicitly hide it from the rmap.
If any error arises on these final actions, we simply unmap the VMA
altogether.
Also update the stacked filesystem compatibility layer to utilise the
action behaviour, and update the VMA tests accordingly.
While we're here, rename __compat_vma_mmap_prepare() to __compat_vma_mmap()
as we are now performing actions invoked by the mmap_prepare in addition to
just the mmap_prepare hook.
Link: https://lkml.kernel.org/r/2601199a7b2eaeadfcd8ab6e199c6d1706650c94.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:25 +0000 (13:11 +0100)]
mm: abstract io_remap_pfn_range() based on PFN
The only instances in which we customise this function are ones in which we
customise the PFN used.
Instances where architectures were not passing the pgprot value through
pgprot_decrypted() are ones where pgprot_decrypted() was a no-op anyway, so
we can simply always pass pgprot through this function.
Use this fact to simplify the use of io_remap_pfn_range(), by abstracting
the PFN via io_remap_pfn_range_pfn() and using this instead of providing a
general io_remap_pfn_range() function per-architecture.
Link: https://lkml.kernel.org/r/d086191bf431b58ce3b231b4f4f555d080f60327.1760959442.git.lorenzo.stoakes@oracle.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We need the ability to split PFN remap between updating the VMA and
performing the actual remap, in order to do away with the legacy f_op->mmap
hook.
To do so, update the PFN remap code to provide shared logic, and also make
remap_pfn_range_notrack() static, as its one user, io_mapping_map_user()
was removed in commit 9a4f90e24661 ("mm: remove mm/io-mapping.c").
Then, introduce remap_pfn_range_prepare(), which accepts VMA descriptor
and PFN parameters, and remap_pfn_range_complete() which accepts the same
parameters as remap_pfn_rangte().
remap_pfn_range_prepare() will set the cow vma->vm_pgoff if necessary, so
it must be supplied with a correct PFN to do so.
While we're here, also clean up the duplicated #ifdef
__HAVE_PFNMAP_TRACKING check and put into a single #ifdef/#else block.
We keep these internal to mm as they should only be used by internal
helpers.
Link: https://lkml.kernel.org/r/75b55de63249b3aa0fd5b3b08ed1d3ff19255d0d.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Pedro Falcato <pfalcato@suse.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:23 +0000 (13:11 +0100)]
mm/vma: rename __mmap_prepare() function to avoid confusion
Now we have the f_op->mmap_prepare() hook, having a static function called
__mmap_prepare() that has nothing to do with it is confusing, so rename
the function to __mmap_setup().
Link: https://lkml.kernel.org/r/d25a22c60ca0f04091697ef9cda0d72ce0cf8af3.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:21 +0000 (13:11 +0100)]
mm: add vma_desc_size(), vma_desc_pages() helpers
It's useful to be able to determine the size of a VMA descriptor range
used on f_op->mmap_prepare, expressed both in bytes and pages, so add
helpers for both and update code that could make use of it to do so.
Link: https://lkml.kernel.org/r/74ef338203c9ff08a9ace73a8f1f6116a79112a0.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 20 Oct 2025 12:11:18 +0000 (13:11 +0100)]
mm/shmem: update shmem to use mmap_prepare
Patch series "expand mmap_prepare functionality, port more users", v5.
Since commit c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file
callback"), The f_op->mmap hook has been deprecated in favour of
f_op->mmap_prepare.
This was introduced in order to make it possible for us to eventually
eliminate the f_op->mmap hook which is highly problematic as it allows
drivers and filesystems raw access to a VMA which is not yet correctly
initialised.
This hook also introduced complexity for the memory mapping operation, as
we must correctly unwind what we do should an error arises.
Overall this interface being so open has caused significant problems for
us, including security issues, it is important for us to simply eliminate
this as a source of problems.
Therefore this series continues what was established by extending the
functionality further to permit more drivers and filesystems to use
mmap_prepare.
We start by udpating some existing users who can use the mmap_prepare
functionality as-is.
We then introduce the concept of an mmap 'action', which a user, on
mmap_prepare, can request to be performed upon the VMA:
By setting the action in mmap_prepare, this allows us to dynamically
decide what to do next, so if a driver/filesystem needs to determine
whether to e.g. remap or use a mixed map, it can do so then change which
is done.
This significantly expands the capabilities of the mmap_prepare hook,
while maintaining as much control as possible in the mm logic.
We split [io_]remap_pfn_range*() functions which allow for PFN remap (a
typical mapping prepopulation operation) split between a prepare/complete
step, as well as io_mremap_pfn_range_prepare, complete for a similar
purpose.
From there we update various mm-adjacent logic to use this functionality
as a first set of changes.
We also add success and error hooks for post-action processing for e.g.
output debug log on success and filtering error codes.
This patch (of 15):
This simply assigns the vm_ops so is easily updated - do so.
Link: https://lkml.kernel.org/r/cover.1760959441.git.lorenzo.stoakes@oracle.com Link: https://lkml.kernel.org/r/7b93b1e89028e39507dac5ca01991e1374d5bbe8.1760959442.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: Chatre, Reinette <reinette.chatre@intel.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Quanmin Yan [Mon, 20 Oct 2025 13:01:25 +0000 (21:01 +0800)]
mm/damon/reclaim: use min_sz_region for core address alignment when setting regions
When setting regions in DAMON_RECLAIM, DAMON_MIN_REGION will be applied as
the core address alignment, and the monitoring target address ranges would
be aligned on DAMON_MIN_REGION * addr_unit. When users 1) set addr_unit
to a value larger than 1, and 2) set the monitoring target address range
as not aligned on DAMON_MIN_REGION * addr_unit, it will cause
DAMON_RECLAIM to operate on unexpectedly large physical address ranges.
For example, if the user sets the monitoring target address range to [4,
8) and addr_unit as 1024, the aimed monitoring target address range is [4
KiB, 8 KiB). Assuming DAMON_MIN_REGION is 4096, so resulting target
address range will be [0, 4096) in the DAMON core layer address system,
and [0, 4 MiB) in the physical address space, which is an unexpected
range.
To fix the issue, use min_sz_region for core address alignment when
setting regions.
Link: https://lkml.kernel.org/r/20251020130125.2875164-3-yanquanmin1@huawei.com Fixes: 7db551fcfb2a ("mm/damon/reclaim: support addr_unit for DAMON_RECLAIM") Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Quanmin Yan [Mon, 20 Oct 2025 13:01:24 +0000 (21:01 +0800)]
mm/damon: add a min_sz_region parameter to damon_set_region_biggest_system_ram_default()
Patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM", v2.
In DAMON_LRU_SORT and DAMON_RECLAIM, damon_set_regions() will apply
DAMON_MIN_REGION as the core address alignment, and the monitoring target
address ranges would be aligned on DAMON_MIN_REGION * addr_unit. When
users 1) set addr_unit to a value larger than 1, and 2) set the monitoring
target address range as not aligned on DAMON_MIN_REGION * addr_unit, it
will cause DAMON_LRU_SORT and DAMON_RECLAIM to operate on unexpectedly
large physical address ranges.
For example, if the user sets the monitoring target address range to [4,
8) and addr_unit as 1024, the aimed monitoring target address range is [4
KiB, 8 KiB). Assuming DAMON_MIN_REGION is 4096, so resulting target
address range will be [0, 4096) in the DAMON core layer address system,
and [0, 4 MiB) in the physical address space, which is an unexpected
range.
To fix the issue, add a min_sz_region parameter to
damon_set_region_biggest_system_ram_default() and use it when calling
damon_set_regions(), replacing the direct use of DAMON_MIN_REGION.
This patch (of 2):
In DAMON_LRU_SORT, damon_set_regions() will apply DAMON_MIN_REGION as the
core address alignment, and the monitoring target address ranges would be
aligned on DAMON_MIN_REGION * addr_unit. When users 1) set addr_unit to a
value larger than 1, and 2) set the monitoring target address range as not
aligned on DAMON_MIN_REGION * addr_unit, it will cause DAMON_LRU_SORT to
operate on unexpectedly large physical address ranges.
For example, if the user sets the monitoring target address range to [4,
8) and addr_unit as 1024, the aimed monitoring target address range is [4
KiB, 8 KiB). Assuming DAMON_MIN_REGION is 4096, so resulting target
address range will be [0, 4096) in the DAMON core layer address system,
and [0, 4 MiB) in the physical address space, which is an unexpected
range.
To fix the issue, add a min_sz_region parameter to
damon_set_region_biggest_system_ram_default() and use it when calling
damon_set_regions(), replacing the direct use of DAMON_MIN_REGION.
Lance Yang [Mon, 20 Oct 2025 15:11:11 +0000 (23:11 +0800)]
mm/khugepaged: guard is_zero_pfn() calls with pte_present()
A non-present entry, like a swap PTE, contains completely different data
(swap type and offset). pte_pfn() doesn't know this, so if we feed it a
non-present entry, it will spit out a junk PFN.
What if that junk PFN happens to match the zeropage's PFN by sheer chance?
While really unlikely, this would be really bad if it did.
So, let's fix this potential bug by ensuring all calls to is_zero_pfn() in
khugepaged.c are properly guarded by a pte_present() check.
Link: https://lkml.kernel.org/r/20251020151111.53561-1-lance.yang@linux.dev Signed-off-by: Lance Yang <lance.yang@linux.dev> Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Nico Pache <npache@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A new DAMON sysfs interface file, namely 'path' has been added under DAMOS
quota goal directory, for specifying the cgroup for
DAMOS_QUOTA_NODE_MEMCG_{USED,FREE}_BP metrics. Document it on the usage
document.
Add a variant of DAMOS_QUOTA_NODE_MEMCG_USED_BP, for the free memory
portion. The value of the metric is implemented as the entire memory of
the given NUMA node subtracted by the given cgroup's usage. So from a
perspective, "unused" could be a better term than "free". But arguably it
is not very clear what is better, so use the term "free".
SeongJae Park [Fri, 17 Oct 2025 21:26:57 +0000 (14:26 -0700)]
mm/damon/sysfs-schemes: support DAMOS_QUOTA_NODE_MEMCG_USED_BP
Add support of DAMOS_QUOTA_NODE_MEMCG_USED_BP. For this, extend quota
goal metric inputs for the new metric, and update DAMOS core layer request
construction logic to set the target cgroup, which is specified by the
user, via the 'path' file.
Implement the handling of the new DAMOS quota goal metric for per-memcg
per-node memory usage, namely DAMOS_QUOTA_NODE_MEMCG_USED_BP. The metric
value is calculated as the sum of active/inactive anon/file pages of the
given cgroup for a given NUMA node.
SeongJae Park [Fri, 17 Oct 2025 21:26:54 +0000 (14:26 -0700)]
mm/damon: add DAMOS quota goal type for per-memcg per-node memory usage
Define a new DAMOS quota auto-tuning target metric for per-cgroup per-node
memory usage. For specifying the cgroup of the interest, add a field,
namely memcg_id, to damos_quota_goal struct.
Note that this commit is only implementing the interface. The handling of
the interface (the metric value calculation) will be implemented in the
following commit.
SeongJae Park [Fri, 17 Oct 2025 21:26:53 +0000 (14:26 -0700)]
mm/damon: document damos_quota_goal->nid use case
Patch series "mm/damon: allow DAMOS auto-tuned for per-memcg per-node
memory usage".
Introduce two new DAMOS quota auto-tuning target metrics for per-cgroup
per-NUMA node memory utilization. Expected use cases are cgroup level
access-aware NUMA memory managements, such as memory tiering or proactive
reclamation on cgroup-based multi-tenant NUMA systems.
Background
==========
The aim-oriented aggressiveness auto-tuning feature of DAMOS is a highly
recommended way for modern DAMOS use cases. Using it, users can specify
what system status they want to achieve with what access-aware system
operations. For example, reclaim cold memory aiming for 0.5 percent of
memory pressure (proactive reclaim), or migrate hot and cold memory
between NUMA nodes having different speed (memory tiering). Then DAMOS
automatically adjusts the aggressiveness of the system operation (e.g.,
increase/decrease reclaim target coldness threshold) based on current
status of the system.
The use case is limited by the supported system status metrics for
specifying the target system status. Two new system metrics for per-node
memory usage ratio, namely DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP, were
recently added to extend the use cases for access-aware NUMA nodes
management, such as memory tiering. Those are expected to be useful for
not only memory tiering but also general access-aware inter-NUMA node page
migration, though.
Limitation
----------
The per-node memory usage based auto-tuning can be applied only
system-wide. For cgroups-based multi-tenant systems, it could arguably
harm the fairness. For example, a cgroup may use faster NUMA node memory
more than other cgroup, depending on their access pattern. If the user of
each cgroup are promised to get the same quality and amount of the system
resource, this can arguably be an unfair situation.
DAMOS supports cgroup level system operations via DAMOS filter. But the
quota auto-tuning system is not aware of cgroups.
New DAMOS Quota Tuning Metrics for Per-Cgroup Per-NUMA Memory Usage
===================================================================
To overcome the limitation, introduce two new DAMOS quota auto-tuning goal
metrics, namely DAMOS_QUOTA_NODE_MEMCG_{USED,FREE}_BP. Those can be
thought of as a variant of DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP that
extended for cgroups.
The two metrics specifies per-cgroup, per-node amount of used and unused
memory in ratio to the total memory of the node. For example, let's
assume a system has two NUMA nodes of size 100 GiB and 50 GiB. And two
cgroups are using 40 GiB and 60 GiB of node 0, 20 GiB and 10 GiB of node
1, respectively, as illustrated by the below table.
node-0 node-1
Total memory 100 GiB 50 GiB
Cgroup A usage 40 GiB 20 GiB
Cgroup B usage 60 GiB 10 GiB
Then, DAMOS_QUOTA_NODE_MEMCG_USED_BP for the cgroups for the first node
are, 40 GiB / 100 GiB = 4,000 bp (40 percent) and 60 GiB / 100 GiB = 6,000
bp (60 percent), respectively. Those for the second node are, 20 GiB / 50
GiB = 4000 bp (40 percent) and 10 GiB / 50 GiB = 2000 bp (20 percent),
respectively.
DAMOS_QUOTA_NODE_MEMCG_FREE_BP for the four cases are, 60 GiB /100 GiB =
6000 bp, 40 GiB / 100 GiB = 4000 bp, 30 GiB / 50 GiB = 6000 bp, and 40 GiB
/ 50 GiB = 8000 bp, respectively.
DAMOS_QUOTA_NODE_MEMCG_USED_BP for cgroup A node-0: 4000 bp
DAMOS_QUOTA_NODE_MEMCG_USED_BP for cgroup B node-0: 6000 bp
DAMOS_QUOTA_NODE_MEMCG_USED_BP for cgroup A node-1: 4000 bp
DAMOS_QUOTA_NODE_MEMCG_USED_BP for cgroup B node-1: 2000 bp
DAMOS_QUOTA_NODE_MEMCG_FREE_BP for cgroup A node-0: 6000 bp
DAMOS_QUOTA_NODE_MEMCG_FREE_BP for cgroup B node-0: 4000 bp
DAMOS_QUOTA_NODE_MEMCG_FREE_BP for cgroup A node-1: 6000 bp
DAMOS_QUOTA_NODE_MEMCG_FREE_BP for cgroup B node-1: 8000 bp
Using these, users can specify how much [un]used amount of memory for
per-cgroup and per-node DAMOS should make as a result of the auto-tuning.
Example Usecase: Cgroup Level Memory Tiering
============================================
Let's suppose a typical and simple tiered memory system. The system
equips two NUMA nodes. The first node (node 0) is CPU-attached and fast.
The second node (node 1) is CPU-unattached and slow. It runs two cgroups
that desire to use about 30 percent and 70 percent of the faster node as
much as possible for their hot data, respectively. Then, the user can
implement DAMOS-based memory tiering for the system using the DAMON
user-space tool (damo), like below.
With the command, the user-space tool will ask DAMON to spawn two kernel
threads, each for monitoring accesses to node 1 (slow) and node 0 (fast),
respectively. It installs two DAMOS schemes on each thread. Let's call
them "promotion scheme for cgroup a/b", and "demotion scheme for cgroup
a/b" in the order. The promotion schemes are installed on the DAMON
thread for node 1 (slow), and demotion schemes are installed on the DAMON
thread for node 0 (fast).
Cgroup Level Hot Pages Migration (Promotion)
--------------------------------------------
Promotion schemes will find memory regions on node 1 (slow), that some
access was detected. The schemes will then migrate the found memory to
node 0 (fast), hottest pages first.
For accurate and effective migration, these schemes use two page level
filters. First, the migration will be filtered for only cgroup A and
cgroup B. That is, "promotion scheme for cgroup B" will not do the
migration if the page is for cgroup A. Secondly, the schemes will ignore
pages that having their page table's Accessed bits unset. The per-page
Accessed bit check logic will also unset the bit if it was set, for the
next check.
For controlled amounts of system resource consumption and aiming on the
target memory usage, the schemes use quotas setup. The migration is
limited to be done only up to 200 MiB per second, to limit the peak system
resource usage. And DAMOS_QUOTA_NODE_MEMCG_USED_BP target is set for
29.7% and 69.7% of node 0 (fast), respectively. The target value is lower
than the high level goal (30% and 70% system memory), to give headroom on
node 0 (fast). DAMOS will adjust the speed of the pages migration based
on the target and current per-cgroup node 0 memory usage. For example, if
cgroup A is utilizing only 10% of node 0, DAMOS will try to migrate more
of cgroup A hot pages from node 1 to node 0, up to 200 MiB per second. If
cgroup A utilizes more than 29.7% of node 0 memory, the cgroup A hot pages
migration from node 1 to node 0 will be slowed and eventually stopped.
Demotion schemes are similar to promotion schemes, but differ in filtering
setup and quota tuning setup. Those filter out pages having their page
table Accessed bits set. And set 70.5% and 30.5% of node 0 memory free
rate for the cgroup A and B, respectively. Hence, if promotion schemes or
something made cgroup A and/or B uses more than 29.5% and 69.5% of node 0,
demotion schemes will start migrating cold pages of appropriate cgroups in
node 0 to node 1, under the 200 MiB per second speed cap, while adjusting
the speed based on how much more than wanted memory is being used.
The quota target values are set to overlap with promotion targets, to keep
a minimum level of page exchanges between the nodes. This is to avoid a
case that the target memory utilization is met, and then access pattern
changes (pages in node 1 become hotter than pages in node 0) while the
memory utilization is unchanged. Without the overlap, neither promotion
of hotter pages in node 1, nor demotion of colder pages in node 0 will
happen since both goals are met. As a result, the faster and slower node
will unexpectedly serve cold and hot data.
I ran a simplified cgroup level memory tiering using the feature, and
confirmed it works as intended.
Setup
-----
I configured a QEMU virtual machine representing a simplified version of
the system that described on the above cgroup level memory tiering example
use case. The system equips 40 CPU cores and two NUMA nodes each having
30 GiB physical memory. The first node (node 0) represents the faster
NUMA node, and the second node (node 1) represents the slower NUMA node.
In specific, below qemu command line options are used.
I booted the virtual machine with a kernel that this patch series is
applied. On the virtual machine, I created two cgroups, namely workload_a
and workload_b. And ran a test program in each cgroup, resulting in one
process per cgroup. The test program allocates 10 GiB memory and evenly
split it into 10 regions. After the allocation, it repeatedly access the
first region for one minute, than the second one for one minute, and so
on. After the one minute repeated access for the 10-th region is done, it
repeats the access from the first region. So the process has 10 GiB of
data in total, but only 1 GiB of it is hot at a given moment, and the hot
data is gradually changed.
While the processes are running, run DAMON for a simple access-aware
memory tiering using below script. It migrates hot and cold data of the
cgroups into node 0 and node 1, aiming the first and the second cgroups
(workload_a and workload_b, respectively) utilizing about 9.7 percent and
19.7 percent of node 0, respectively.
Note that this setup is a simplified version of the above example use
case, for ease of test. Also note that we assigned 30 GiB physical memory
to node 0, but DAMON in this setup works for only 27 GiB of the memory.
It is due to an internal implementation detail of DAMON user-space tool
that not really important for this test.
After starting DAMON, the pages continuously be migrated across nodes. A
few minutes later, the memory usage of the cgroups converges into the
aimed amounts, and keeps the level, as expected. To confirm the status is
kept in the target level as expected, I collected the memory usage stat of
the cgroups using memory.numa_stat file, after the stats are converged. I
repeat the stat collection 42 times with 5 seconds delay between each of
the collections. The results are as below:
node0_memory_usage average stdev
workload_a 2.79GiB 522.06MiB
workload_b 5.15GiB 739.10MiB
The average values are quite close to the targeted values: 27 GiB * 9.7% =
2.619 GiB for workload_a, and 27 GiB * 19.7% = 5.319 GiB. A level of
variances are expected, given the overlap of the promotion/demotion
targets, and dynamic data access pattern of the workloads. Give that, the
measured variances are at a reasonable level.
Patches Sequence
================
The first patch (patch 1) updates the kernel-doc comment of
damos_quota_goal struct to clarify usage of optional fields of the struct,
since later patches will add such optional fields.
Following four patches (patches 2-5) implement a new DAMOS quota goal
metric for per-cgroup per-node memory usage. Those extends the core layer
interface for the new metric (patch 2), implement the metric value
calculation on the core layer (patch 3), add DAMON sysfs interface file
for the target cgroup specification (patch 4), and implement support of
the new metric on DAMON sysfs interface (patch 5).
Next two patches implment the second new DAMOS quota goal metric for
per-cgroup per-node free (or, unused) memory. Those implement it in the
core layer (patch 6) and DAMON sysfs interface (patch 7), extending the
existing implementation for memory usage metric.
Final three patches update the design (patch 8), the usage (patch 9), and
the ABI (patch 10) documents for the changes that are introduced by this
patch series.
This patch (of 10):
damos_quota_goal kerneldoc comment is not explaining when @metric is used.
Update the comment for that.
Link: https://lkml.kernel.org/r/20251017212706.183502-1-sj@kernel.org Link: https://lkml.kernel.org/r/20251017212706.183502-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Fri, 17 Oct 2025 07:53:07 +0000 (15:53 +0800)]
mm: vmscan: simplify the logic for activating dirty file folios
After commit 6b0dfabb3555 ("fs: Remove aops->writepage"), we no longer
attempt to write back filesystem folios through reclaim.
However, in the shrink_folio_list() function, there still remains some
logic related to writeback control of dirty file folios. The original
logic was that, for direct reclaim, or when folio_test_reclaim() is false,
or the PGDAT_DIRTY flag is not set, the dirty file folios would be
directly activated to avoid being scanned again; otherwise, it will try to
writeback the dirty file folios. However, since we can no longer perform
writeback on dirty folios, the dirty file folios will still be activated.
Additionally, under the original logic, if we continue to try writeback
dirty file folios, we will also check the references flag,
sc->may_writepage, and may_enter_fs(), which may result in dirty file
folios being left in the inactive list. This is unreasonable. Even if
these dirty folios are scanned again, we still cannot clean them.
Therefore, the checks on these dirty file folios appear to be redundant
and can be removed. Dirty file folios should be directly moved to the
active list to avoid being scanned again. Since we set the PG_reclaim
flag for the dirty folios, once the writeback is completed, they will be
moved back to the tail of the inactive list to be retried for quick
reclaim.
Link: https://lkml.kernel.org/r/ba5c49955fd93c6850bcc19abf0e02e1573768aa.1760687075.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Fri, 17 Oct 2025 07:53:06 +0000 (15:53 +0800)]
mm: vmscan: filter out the dirty file folios for node_reclaim()
Patch series "optimize the logic for handling dirty file folios during
reclaim", v2.
Since we no longer attempt to write back filesystem folios during reclaim,
some logic for handling dirty file folios in the reclaim process also
needs to be updated. Please check the details in each patch.
This patch (of 2):
After commit 6b0dfabb3555 ("fs: Remove aops->writepage"), we no longer
attempt to write back filesystem folios in pageout(), and only tmpfs/shmem
folios and anonymous swapcache folios can be written back. Therefore, we
should also filter out the dirty filesystem folios for node_reclaim() to
avoid unnecessary LRU scans.
Shakeel Butt [Thu, 16 Oct 2025 16:10:35 +0000 (09:10 -0700)]
memcg: net: track network throttling due to memcg memory pressure
The kernel can throttle network sockets if the memory cgroup associated
with the corresponding socket is under memory pressure. The throttling
actions include clamping the transmit window, failing to expand receive or
send buffers, aggressively prune out-of-order receive queue, FIN deferred
to a retransmitted packet and more. Let's add memcg metric to track such
throttling actions.
At the moment memcg memory pressure is defined through vmpressure and in
future it may be defined using PSI or we may add more flexible way for the
users to define memory pressure, maybe through ebpf. However the
potential throttling actions will remain the same, so this newly
introduced metric will continue to track throttling actions irrespective
of how memcg memory pressure is defined.
Link: https://lkml.kernel.org/r/20251016161035.86161-1-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Daniel Sedlak <daniel.sedlak@cdn77.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kacinski <kuba@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Neal Cardwell <ncardwell@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
wang lian [Wed, 15 Oct 2025 09:29:57 +0000 (17:29 +0800)]
mm/khugepaged: fix comment for default scan sleep duration
The comment for khugepaged_scan_sleep_millisecs incorrectly states the
default scan period is 30 seconds. The actual default value in the code
is 10000ms (10 seconds).
This patch corrects the comment to match the code, preventing potential
confusion. The incorrect comment has existed since the feature was first
introduced. While at it, replace the magic value 512 by HPAGE_PMD_NR and
use 'ptes'.
Link: https://lkml.kernel.org/r/20251015092957.37432-1-lianux.mm@gmail.com Signed-off-by: wang lian <lianux.mm@gmail.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Lance Yang <lance.yang@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: Nico Pache <npache@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vlastimil Babka [Wed, 15 Oct 2025 17:50:38 +0000 (19:50 +0200)]
mm/page_alloc: simplify and cleanup pcp locking
The pcp locking relies on pcp_spin_trylock() which has to be used together
with pcp_trylock_prepare()/pcp_trylock_finish() to work properly on !SMP
!RT configs. This is tedious and error-prone.
We can remove pcp_spin_lock() and underlying pcpu_spin_lock() because we
don't use it. Afterwards pcp_spin_unlock() is only used together with
pcp_spin_trylock(). Therefore we can add the UP_flags parameter to them
both and handle pcp_trylock_prepare()/finish() within.
Additionally for the configs where pcp_trylock_prepare()/finish() are
no-op (SMP || RT) make them pass &UP_flags to a no-op inline function.
This ensures typechecking and makes the local variable "used" so we can
remove the __maybe_unused attributes.
In my compile testing, bloat-o-meter reported no change on SMP config, so
the compiler is capable of optimizing away the no-ops same as before, and
we have simplified the code using pcp_spin_trylock().
Link: https://lkml.kernel.org/r/20251015-b4-pcp-lock-cleanup-v2-1-740d999595d5@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joshua Hahn [Tue, 14 Oct 2025 14:50:10 +0000 (07:50 -0700)]
mm/page_alloc: batch page freeing in free_frozen_page_commit
Before returning, free_frozen_page_commit calls free_pcppages_bulk using
nr_pcp_free to determine how many pages can appropritately be freed, based
on the tunable parameters stored in pcp. While this number is an accurate
representation of how many pages should be freed in total, it is not an
appropriate number of pages to free at once using free_pcppages_bulk,
since we have seen the value consistently go above 2000 in the Meta fleet
on larger machines.
As such, perform batched page freeing in free_pcppages_bulk by using
pcp->batch. In order to ensure that other processes are not starved of
the zone lock, free both the zone lock and pcp lock to yield to other
threads.
Note that because free_frozen_page_commit now performs a spinlock inside
the function (and can fail), the function may now return with a freed pcp.
To handle this, return true if the pcp is locked on exit and false
otherwise.
In addition, since free_frozen_page_commit must now be aware of what UP
flags were stored at the time of the spin lock, and because we must be
able to report new UP flags to the callers, add a new unsigned long*
parameter UP_flags to keep track of this.
The following are a few synthetic benchmarks, made on three machines. The
first is a large machine with 754GiB memory and 316 processors. The
second is a relatively smaller machine with 251GiB memory and 176
processors. The third and final is the smallest of the three, which has
62GiB memory and 36 processors.
On all machines, I kick off a kernel build with -j$(nproc). Negative
delta is better (faster compilation)
Large machine (754GiB memory, 316 processors)
make -j$(nproc)
+------------+---------------+-----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+-----------+
| real | 0.8070 | - 1.4865 |
| user | 0.2823 | + 0.4081 |
| sys | 5.0267 | -11.8737 |
+------------+---------------+-----------+
Medium machine (251GiB memory, 176 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.2806 | +0.0351 |
| user | 0.0994 | +0.3170 |
| sys | 0.6229 | -0.6277 |
+------------+---------------+----------+
Small machine (62GiB memory, 36 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.1503 | -2.6585 |
| user | 0.0431 | -2.2984 |
| sys | 0.1870 | -3.2013 |
+------------+---------------+----------+
Here, variation is the coefficient of variation, i.e. standard deviation
/ mean.
[joshua.hahnjy@gmail.com: simplify checks] Link: https://lkml.kernel.org/r/20251014192827.851389-1-joshua.hahnjy@gmail.com Link: https://lkml.kernel.org/r/20251014145011.3427205-4-joshua.hahnjy@gmail.com Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com> Suggested-by: Chris Mason <clm@fb.com> Co-developed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Brendan Jackman <jackmanb@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: SeongJae Park <sj@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joshua Hahn [Tue, 14 Oct 2025 14:50:09 +0000 (07:50 -0700)]
mm/page_alloc: batch page freeing in decay_pcp_high
It is possible for pcp->count - pcp->high to exceed pcp->batch by a lot.
When this happens, we should perform batching to ensure that
free_pcppages_bulk isn't called with too many pages to free at once and
starve out other threads that need the pcp or zone lock.
Since we are still only freeing the difference between the initial
pcp->count and pcp->high values, there should be no change to how many
pages are freed.
Link: https://lkml.kernel.org/r/20251014145011.3427205-3-joshua.hahnjy@gmail.com Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com> Suggested-by: Chris Mason <clm@fb.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Co-developed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Brendan Jackman <jackmanb@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: SeongJae Park <sj@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/page_alloc: Batch callers of free_pcppages_bulk", v5.
Motivation & Approach
=====================
While testing workloads with high sustained memory pressure on large
machines in the Meta fleet (1Tb memory, 316 CPUs), we saw an unexpectedly
high number of softlockups. Further investigation showed that the zone
lock in free_pcppages_bulk was being held for a long time, and was called
to free 2k+ pages over 100 times just during boot.
This causes starvation in other processes for the zone lock, which can
lead to the system stalling as multiple threads cannot make progress
without the locks. We can see these issues manifesting as warnings:
While these warnings don't indicate a crash or a kernel panic, they do
point to the underlying issue of lock contention. To prevent starvation
in both locks, batch the freeing of pages using pcp->batch.
Because free_pcppages_bulk is called with the pcp lock and acquires the
zone lock, relinquishing and reacquiring the locks are only effective when
both of them are broken together (unless the system was built with queued
spinlocks). Thus, instead of modifying free_pcppages_bulk to break both
locks, batch the freeing from its callers instead.
A similar fix has been implemented in the Meta fleet, and we have seen
significantly less softlockups.
Testing
=======
The following are a few synthetic benchmarks, made on three machines. The
first is a large machine with 754GiB memory and 316 processors.
The second is a relatively smaller machine with 251GiB memory and 176
processors. The third and final is the smallest of the three, which has 62GiB
memory and 36 processors.
On all machines, I kick off a kernel build with -j$(nproc).
Negative delta is better (faster compilation).
Large machine (754GiB memory, 316 processors)
make -j$(nproc)
+------------+---------------+-----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+-----------+
| real | 0.8070 | - 1.4865 |
| user | 0.2823 | + 0.4081 |
| sys | 5.0267 | -11.8737 |
+------------+---------------+-----------+
Medium machine (251GiB memory, 176 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.2806 | +0.0351 |
| user | 0.0994 | +0.3170 |
| sys | 0.6229 | -0.6277 |
+------------+---------------+----------+
Small machine (62GiB memory, 36 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.1503 | -2.6585 |
| user | 0.0431 | -2.2984 |
| sys | 0.1870 | -3.2013 |
+------------+---------------+----------+
Here, variation is the coefficient of variation, i.e. standard deviation
/ mean.
Based on these results, it seems like there are varying degrees to how
much lock contention this reduces. For the largest and smallest machines
that I ran the tests on, it seems like there is quite some significant
reduction. There is also some performance increases visible from
userspace.
Interestingly, the performance gains don't scale with the size of the
machine, but rather there seems to be a dip in the gain there is for the
medium-sized machine. One possible theory is that because the high
watermark depends on both memory and the number of local CPUs, what
impacts zone contention the most is not these individual values, but
rather the ratio of mem:processors.
This patch (of 5):
Currently, refresh_cpu_vm_stats returns an int, indicating how many
changes were made during its updates. Using this information, callers
like vmstat_update can heuristically determine if more work will be done
in the future.
However, all of refresh_cpu_vm_stats's callers either (a) ignore the
result, only caring about performing the updates, or (b) only care about
whether changes were made, but not *how many* changes were made.
Simplify the code by returning a bool instead to indicate if updates
were made.
In addition, simplify fold_diff and decay_pcp_high to return a bool
for the same reason.
Link: https://lkml.kernel.org/r/20251014145011.3427205-1-joshua.hahnjy@gmail.com Link: https://lkml.kernel.org/r/20251014145011.3427205-2-joshua.hahnjy@gmail.com Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Brendan Jackman <jackmanb@google.com> Cc: Chris Mason <clm@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Thu, 23 Oct 2025 11:37:37 +0000 (19:37 +0800)]
mm: huge_memory: use folio_can_map_prot_numa() for pmd folio
The folio_can_map_prot_numa() checks whether the folio can map prot numa,
which skips unsuitable folio, i.e. zone device, shared folios (KSM, CoW),
non-movable dma pinned, dirty file folio and folios that already have the
expected node affinity. Although the ksm only applies to small folios, an
extra test was added for large folios, but the other policies should be
applied to pmd folio, which helps to avoid unnecessary pmd change and
folio migration attempts.
Link: https://lkml.kernel.org/r/20251023113737.3572790-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Thu, 23 Oct 2025 11:37:36 +0000 (19:37 +0800)]
mm: mprotect: convert to folio_can_map_prot_numa()
The prot_numa_skip() naming is not good since it updates the folio access
time except checking whether to skip prot NUMA, so rename it to
folio_can_map_prot_numa(), and cleanup it a bit, remove ret by directly
return value instead of goto style.
Adding a new helper vma_is_single_threaded_private() to check whether it's
a single threaded private VMA, and make folio_can_map_prot_numa() a
non-static function so that they could be reused in change_huge_pmd(),
since folio_can_map_prot_numa() will be shared in different paths, let's
move it near change_prot_numa() in mempolicy.c.
Link: https://lkml.kernel.org/r/20251023113737.3572790-4-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Thu, 23 Oct 2025 11:37:35 +0000 (19:37 +0800)]
mm: mprotect: avoid unnecessary struct page accessing if pte_protnone()
If the pte_protnone() is true, we could avoid unnecessary struct page
accessing and reduce cache footprint when scanning page tables for prot
numa, there was a similar change before, see more commit a818f5363a0e
("autonuma: reduce cache footprint when scanning page tables").
Link: https://lkml.kernel.org/r/20251023113737.3572790-3-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Thu, 23 Oct 2025 11:37:34 +0000 (19:37 +0800)]
mm: mprotect: always skip dma pinned folio in prot_numa_skip()
Patch series "mm: some optimizations for prot numa", v5.
This patch (of 4):
If the folio (even not CoW folio) is dma pinned, it can't be migrated due
to the elevated reference count. So always skip a pinned folio to avoid
wasting cycles when folios are migrated.
Link: https://lkml.kernel.org/r/20251023113737.3572790-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20251023113737.3572790-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Donet Tom [Tue, 14 Oct 2025 15:39:17 +0000 (21:09 +0530)]
drivers/base/node: fold unregister_node() into unregister_one_node()
unregister_node() is only called from unregister_one_node(). This patch
folds unregister_node() into its only caller and renames
unregister_one_node() to unregister_node().
This reduces unnecessary indirection and simplifies the code structure.
No functional changes are introduced.
[donettom@linux.ibm.com: remove extra spaces before @nid and "All"] Link: https://lkml.kernel.org/r/cff01514-9074-4c97-bcf1-d4e3594e48b0@linux.ibm.com Link: https://lkml.kernel.org/r/32b7d5d8f0f30d313c3e1d8798f591459c8746f9.1760097208.git.donettom@linux.ibm.com Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Donet Tom [Tue, 14 Oct 2025 15:39:16 +0000 (21:09 +0530)]
drivers/base/node: fold register_node() into register_one_node()
Patch series "drivers/base/node: fold node register and unregister
functions", v2.
The first patch merges register_one_node() and register_node(), leaving a
single register_node() function.
The second patch merges unregister_one_node() and unregister_node(),
leaving a single unregister_node() function.
There are no functional changes in these patches.
This patch (of 2):
register_node() is only called from register_one_node(). This patch folds
register_node() into its only caller and renames register_one_node() to
register_node().
This reduces unnecessary indirection and simplifies the code structure.
No functional changes are introduced.
[akpm@linux-foundation.org: fix kerneldoc, per David] Link: https://lkml.kernel.org/r/cover.1760097207.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/910853c9dd61f7a2190a56cba101e73e9c6859be.1760097207.git.donettom@linux.ibm.com Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huacai Chen [Mon, 13 Oct 2025 09:56:20 +0000 (17:56 +0800)]
mm: remove the BOUNCE config option
Commit eeadd68e2a5f ("block: remove bounce buffering support") remove
block/bounce.c but left the BOUNCE config option. Now this option has no
users, so remove it.
Link: https://lkml.kernel.org/r/20251013095620.1111061-1-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel-doc for __vmalloc_node_noprof() incorrectly states that
__GFP_NOFAIL reclaim modifier is not supported. In fact it has been
supported since commit 9376130c390a ("mm/vmalloc: add support for
__GFP_NOFAIL").
To avoid duplication and future drift, point this helper's doc to
__vmalloc_node_range_noprof() for details and the full description.
Link: https://lkml.kernel.org/r/20251013174222.90123-1-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yadong Qi [Fri, 10 Oct 2025 01:43:11 +0000 (09:43 +0800)]
mm: vmalloc: WARN_ON if mapping size is not PAGE_SIZE aligned
In mm/vmalloc.c, the function vmap_pte_range() assumes that the mapping
size is aligned to PAGE_SIZE. If this assumption is violated, the loop
will become infinite because the termination condition (`addr != end`)
will never be met. This can lead to overwriting other VA ranges and/or
random pages physically follow the page table.
It's the caller's responsibility to ensure that the mapping size is
aligned to PAGE_SIZE. However, the memory corruption is hard to root
cause. To identify the programming error in the caller easier, check
whether the mapping size is PAGE_SIZE aligned with WARN_ON_ONCE().
[yadong.qi@linux.alibaba.com: fix uninitialized value issue] Closes: https://lore.kernel.org/r/202510110050.VG9YKMRK-lkp@intel.com/ Link: https://lkml.kernel.org/r/20251010014311.1689-1-yadong.qi@linux.alibaba.com Signed-off-by: Yadong Qi <yadong.qi@linux.alibaba.com> Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Song Hu [Tue, 30 Sep 2025 09:21:52 +0000 (17:21 +0800)]
mm/page_owner: simplify zone iteration logic in init_early_allocated_pages()
The current implementation uses nested loops: first iterating over all
online nodes, then over zones within each node. This can be simplified by
using the for_each_populated_zone() macro which directly iterates through
all populated zones.
This change:
1. Removes the intermediate init_zones_in_node() function
2. Simplifies init_early_allocated_pages() to use direct zone iteration
3. Updates init_pages_in_zone() to take only zone parameter and access
node_id via zone->zone_pgdat
The functionality remains identical, but the code is cleaner and more
maintainable.
Link: https://lkml.kernel.org/r/20250930092153.843109-2-husong@kylinos.cn Signed-off-by: Song Hu <husong@kylinos.cn> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Ye Liu <liuye@kylinos.cn> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / thirdparty / kernel / linux.git / log
