Note that this is a GSC WA and we don't load the GSC on BMG, so
extending the WA to BMG won't do anything right now. However, it helps
future-proof the driver so that if we ever turn the GSC on we won't have
to remember to extend this WA.
v2: don't use VERSION_RANGE from 2001 to 2004 (Matt)
Lucas De Marchi [Fri, 13 Jun 2025 20:00:37 +0000 (13:00 -0700)]
drm/xe/guc: Default log level to non-verbose
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:16 +0000 (12:26 -0700)]
drm/xe/oa: Assign hwe for OAM_SAG
Because OAM_SAG doesn't have an attached hwe, assign another hwe belonging
to the same gt (and different OAM unit) to OAM_SAG. A hwe is needed for
batch submissions to program OA HW.
v2: Assign an engine with a valid OA unit for OAM_SAG (Umesh)
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:15 +0000 (12:26 -0700)]
drm/xe/oa: Introduce stream->oa_unit
Previously, the oa_unit associated with an OA stream was derived from hwe
associated with the stream (stream->hwe->oa_unit). This breaks with OAM_SAG
since OAM_SAG does not have any attached hardware engines. Resolve this by
introducing stream->oa_unit and stop depending on stream->hwe.
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:13 +0000 (12:26 -0700)]
drm/xe/oa/uapi: Expose media OA units
On Xe2+ platforms, media engines are attached to "SCMI" OA media (OAM)
units. One or more SCMI OAM units might be present on a platform. In
addition there is another OAM unit for global events, called
OAM-SAG. Performance metrics for media workloads can be obtained from these
OAM units, similar to OAG.
Expose these OAM units for userspace to use. OAM-SAG is exposed as an OA
unit without any attached engines.
Bspec: 70819, 67103, 63844, 72572, 74476, 61284
v2: Fix xe_gt_WARN_ON in __hwe_oam_unit for < 12.7 platforms
v3: Return XE_OA_UNIT_INVALID for < 12.7 to indicate no OAM units
v4: Move xe_oa_print_oa_units() to separate patch
v5: Introduce DRM_XE_OA_UNIT_TYPE_OAM_SAG
v6: Introduce DRM_XE_OA_CAPS_OAM
Matthew Brost [Thu, 12 Jun 2025 17:28:50 +0000 (10:28 -0700)]
drm/xe: Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset
The parallel scratch layout spans 2k and LRC_ENGINE_ID_PPHWSP_OFFSET
lands within than space. This happens to be ok as the offset lands in
reserved part of guc_sched_wq_desc, but for future safety move
LRC_ENGINE_ID_PPHWSP_OFFSET to the unused offset of 1024 below parallel
scratch layout.
Michal Wajdeczko [Sat, 14 Jun 2025 18:24:46 +0000 (20:24 +0200)]
drm/xe/tests: Convert xe_pci tests to parametrized tests
Instead of looping over known IP descriptors within single test
case, without any diagnostics which IP descriptor is eventually
broken, define kunit parameter generators with IP descriptors,
and make existing xe_pci tests fully parametrized:
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250614182446.2024-1-michal.wajdeczko@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Lucas De Marchi [Wed, 11 Jun 2025 19:38:37 +0000 (12:38 -0700)]
drm/xe: Fix kconfig prompt
The xe driver is the official driver for Intel Xe2 and later, while
maintaining experimental support for earlier GPUs. Reword the help
message accordingly.
Matt Roper [Fri, 13 Jun 2025 21:47:53 +0000 (14:47 -0700)]
drm/xe/pat: Consolidate PAT programming logic for pre-Xe2 and post-Xe2
Now that the PAT settings for the new special entries introduced by Xe2
are decided during early software init and left NULL on platforms they
don't apply to, there's no need to keep separate programming functions
for pre-Xe2 and post-Xe2 platforms. Consolidate down to a single pair
of programming functions (mcr and non-mcr) that can be used on any
platform.
Matt Roper [Fri, 13 Jun 2025 21:47:52 +0000 (14:47 -0700)]
drm/xe/pat: Determine ATS / PTA programming during early sw init
Decide whether programming of the special ATS and PTA PAT entries is
necessary (and which entries should be programmed) during early software
initialization rather than hardcoding this into the 'program' functions.
Future platforms may want to re-use the same functions but utilize
different special entry values. Consolidating all of the decisions
into one place keeps things simple.
drm/xe: Add helper function to inject fault into ct_dead_capture()
When injecting fault to xe_guc_ct_send_recv() & xe_guc_mmio_send_recv()
functions, the CI test systems are going out of space and crashing. To
avoid this issue, a new helper function is created and when fault is
injected into this xe_is_injection_active() helper function, ct dead
capture is avoided which suppresses ct dumps in the log.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Suggested-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250612080402.22011-1-satyanarayana.k.v.p@intel.com
When the GuC fails to load we declare the device wedged. However, the
very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done
before the GT1 GuC objects are initialized, so things go bad when the
wedge code attempts to cleanup GT1. To fix this, check the initialization
status in the functions called during wedge.
Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Zhanjun Dong <zhanjun.dong@intel.com> Cc: stable@vger.kernel.org # v6.12+: 1e1981b16bb1: drm/xe: Fix taking invalid lock on wedge Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Matthew Brost [Thu, 12 Jun 2025 03:19:25 +0000 (20:19 -0700)]
drm/xe: Make WA BB part of LRC BO
No idea why, but without this GuC context switches randomly fail when
running IGTs in a loop. Need to follow up why this fixes the
aforementioned issue but can live with a stable driver for now.
Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250612031925.4009701-1-matthew.brost@intel.com
Matthew Brost [Tue, 3 Jun 2025 17:40:12 +0000 (10:40 -0700)]
drm/xe: Don't use drm exec locking in SVM pagefaults
Only the VM dma-resv lock is needed in SVM pagefaults so
xe_vm_lock/unlock can be used instead of drm exec. Micro optimization
but should save some CPU cycles in a critical path.
Lucas De Marchi [Wed, 4 Jun 2025 15:03:06 +0000 (08:03 -0700)]
drm/xe/lrc: Prepare WA BB setup for more users
The post context restore (WA BB) is a mechanism in HW that may be used
for things other than the utilization setup. Create a new function
called setup_wa_bb() that wraps any function writing useful commands in
the buffer.
Lucas De Marchi [Wed, 4 Jun 2025 15:03:05 +0000 (08:03 -0700)]
drm/xe/lrc: Use a temporary buffer for WA BB
In case the BO is in iomem, we can't simply take the vaddr and write to
it. Instead, prepare a separate buffer that is later copied into io
memory. Right now it's just a few words that could be using
xe_map_write32(), but the intention is to grow the WA BB for other
uses.
Fixes: 82b98cadb01f ("drm/xe: Add WA BB to capture active context utilization") Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250604-wa-bb-fix-v1-1-0dfc5dafcef0@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Matt Roper [Thu, 5 Jun 2025 22:53:53 +0000 (15:53 -0700)]
drm/xe: GSM size should be constant on most platforms
On old Intel platforms, the size of the GSM (i.e., the stolen memory
that holds the GGTT page table entries) could vary, so the driver needed
to read the actual size from the PCI config space. However from Xe_HP
onward, the GSM is now always guaranteed to be exactly 8MB (which
translates to a 4GB GGTT address space); this is always true regardless
of what the platform's much larger PPGTT address space is.
The bspec doesn't document the PCI config space as being a valid way to
query the size of the GSM after Xe_LP platforms, although so far it
still seems to be giving us proper values for Xe_HP, Xe2, and Xe3.
However we suspect that the config space will stop providing correct
values on some upcoming platforms, so we should stop relying on it.
Instead just use the hardcoded 8MB value as documented elsewhere in the
bspec.
We are already prepared to define firmwares per-GT type, so we
should also prepare our messages to be GT-oriented.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606204311.813-1-michal.wajdeczko@intel.com
drm/xe: Do not rely on GGTT internals in xe_guc_buf kunit tests
Add a function to init ggtt for kunit, and use the GGTT function for
initialising the GGTT node without populating it. This
prevents the test from ever knowing about struct xe_ggtt.
drm/xe: Implement a helper for reading out a GGTT PTE at a specified offset
Split the GGTT PTE readout to a separate function, this is useful for
adding testcases in the next commit, and also cleaner than manually
reading out GGTT.
drm/xe/display: Dont poke into GGTT internals to fill a DPT
For DPT, it is sufficient to get the GGTT encode flags to fill the DPT.
Create a function to return the encode flags, and then encode using the
BO address.
drm/xe/ggtt: Seperate flags and address in PTE encoding
Pinning large linear display framebuffers is becoming a bottleneck.
My plan of attack is doing a custom walk over the BO, this allows for
easier optimization of consecutive entries.
IOSF_MBI was only useful for some gen8 platforms, which were never
supported by Xe. Presumably needed for display at one point, but display
is fixed to put stubs in compat-i915-headers/vlv_sideband.h. (in
drm-intel-next: vlv_iosf_sb.h)
Linus Torvalds [Sun, 8 Jun 2025 18:33:00 +0000 (11:33 -0700)]
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Linus Torvalds [Sun, 8 Jun 2025 18:27:20 +0000 (11:27 -0700)]
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Zhang Rui [Fri, 30 May 2025 00:09:28 +0000 (08:09 +0800)]
tools/power turbostat: Avoid probing the same perf counters
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Sat, 17 May 2025 09:44:50 +0000 (17:44 +0800)]
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: Add Android support for MSR device handling
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sun, 8 Jun 2025 18:07:33 +0000 (11:07 -0700)]
Merge tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Linus Torvalds [Sun, 8 Jun 2025 18:02:53 +0000 (11:02 -0700)]
Merge tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Linus Torvalds [Sun, 8 Jun 2025 17:35:12 +0000 (10:35 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Linus Torvalds [Sun, 8 Jun 2025 17:20:21 +0000 (10:20 -0700)]
Merge tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Linus Torvalds [Sun, 8 Jun 2025 15:19:01 +0000 (08:19 -0700)]
Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Linus Torvalds [Sat, 7 Jun 2025 17:05:35 +0000 (10:05 -0700)]
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Linus Torvalds [Sat, 7 Jun 2025 17:00:03 +0000 (10:00 -0700)]
Merge tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Linus Torvalds [Sat, 7 Jun 2025 16:56:18 +0000 (09:56 -0700)]
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
Linus Torvalds [Sat, 7 Jun 2025 16:40:08 +0000 (09:40 -0700)]
Merge tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Linus Torvalds [Sat, 7 Jun 2025 14:24:07 +0000 (07:24 -0700)]
Merge tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
Mike Rapoport [Sat, 17 May 2025 09:30:48 +0000 (12:30 +0300)]
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/ Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Thomas Huth [Fri, 14 Mar 2025 07:10:03 +0000 (08:10 +0100)]
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Al Viro [Wed, 4 Jun 2025 16:27:08 +0000 (12:27 -0400)]
do_change_type(): refuse to operate on unmounted/not ours mounts
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 2 Jun 2025 00:11:06 +0000 (20:11 -0400)]
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org> Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 7 Jun 2025 05:06:57 +0000 (22:06 -0700)]
Merge tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
Linus Torvalds [Sat, 7 Jun 2025 04:45:45 +0000 (21:45 -0700)]
Merge tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
Al Viro [Fri, 6 Jun 2025 22:31:03 +0000 (18:31 -0400)]
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
... and fix the breakage in anon-to-anon case. There are two cases
acceptable for do_move_mount() and mixing checks for those is making
things hard to follow.
One case is move of a subtree in caller's namespace.
* source and destination must be in caller's namespace
* source must be detachable from parent
Another is moving the entire anon namespace elsewhere
* source must be the root of anon namespace
* target must either in caller's namespace or in a suitable
anon namespace (see may_use_mount() for details).
* target must not be in the same namespace as source.
It's really easier to follow if tests are *not* mixed together...
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 3b5260d12b1f ("Don't propagate mounts into detached trees") Reported-by: Allison Karlitskaya <lis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs: allow clone_private_mount() for a path on real rootfs
Mounting overlayfs with a directory on real rootfs (initramfs)
as upperdir has failed with following message since commit db04662e2f4f ("fs: allow detached mounts in clone_private_mount()").
[ 4.080134] overlayfs: failed to clone upperpath
Overlayfs mount uses clone_private_mount() to create internal mount
for the underlying layers.
The commit made clone_private_mount() reject real rootfs because
it does not have a parent mount and is in the initial mount namespace,
that is not an anonymous mount namespace.
This issue can be fixed by modifying the permission check
of clone_private_mount() following [1].
Al Viro [Tue, 3 Jun 2025 21:57:27 +0000 (17:57 -0400)]
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
9ffb14ef61ba "move_mount: allow to add a mount into an existing group"
breaks assertions on ->mnt_share/->mnt_slave. For once, the data structures
in question are actually documented.
Documentation/filesystem/sharedsubtree.rst:
All vfsmounts in a peer group have the same ->mnt_master. If it is
non-NULL, they form a contiguous (ordered) segment of slave list.
do_set_group() puts a mount into the same place in propagation graph
as the old one. As the result, if old mount gets events from somewhere
and is not a pure event sink, new one needs to be placed next to the
old one in the slave list the old one's on. If it is a pure event
sink, we only need to make sure the new one doesn't end up in the
middle of some peer group.
"move_mount: allow to add a mount into an existing group" ends up putting
the new one in the beginning of list; that's definitely not going to be
in the middle of anything, so that's fine for case when old is not marked
shared. In case when old one _is_ marked shared (i.e. is not a pure event
sink), that breaks the assumptions of propagation graph iterators.
Put the new mount next to the old one on the list - that does the right thing
in "old is marked shared" case and is just as correct as the current behaviour
if old is not marked shared (kudos to Pavel for pointing that out - my original
suggested fix changed behaviour in the "nor marked" case, which complicated
things for no good reason).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 9ffb14ef61ba ("move_mount: allow to add a mount into an existing group") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 4 May 2025 17:28:37 +0000 (13:28 -0400)]
finish_automount(): don't leak MNT_LOCKED from parent to child
Intention for MNT_LOCKED had always been to protect the internal
mountpoints within a subtree that got copied across the userns boundary,
not the mountpoint that tree got attached to - after all, it _was_
exposed before the copying.
For roots of secondary copies that is enforced in attach_recursive_mnt() -
MNT_LOCKED is explicitly stripped for those. For the root of primary
copy we are almost always guaranteed that MNT_LOCKED won't be there,
so attach_recursive_mnt() doesn't bother. Unfortunately, one call
chain got overlooked - triggering e.g. NFS referral will have the
submount inherit the public flags from parent; that's fine for such
things as read-only, nosuid, etc., but not for MNT_LOCKED.
This is particularly pointless since the mount attached by finish_automount()
is usually expirable, which makes any protection granted by MNT_LOCKED
null and void; just wait for a while and that mount will go away on its own.
Include MNT_LOCKED into the set of flags to be ignored by do_add_mount() - it
really is an internal flag.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 1 Jun 2025 18:02:26 +0000 (14:02 -0400)]
path_overmount(): avoid false negatives
Holding namespace_sem is enough to make sure that result remains valid.
It is *not* enough to avoid false negatives from __lookup_mnt(). Mounts
can be unhashed outside of namespace_sem (stuck children getting detached
on final mntput() of lazy-umounted mount) and having an unrelated mount
removed from the hash chain while we traverse it may end up with false
negative from __lookup_mnt(). We need to sample and recheck the seqlock
component of mount_lock...
Bug predates the introduction of path_overmount() - it had come from
the code in finish_automount() that got abstracted into that helper.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 26df6034fdb2 ("fix automount/automount race properly") Fixes: 6ac392815628 ("fs: allow to mount beneath top mount") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Add backlight power control support
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
projects / thirdparty / kernel / linux.git / log
