Pedro Alves [Wed, 20 Apr 2016 19:13:23 +0000 (20:13 +0100)]
Fix host signal vs gdb signal mixup in gdb/darwin-nat.c
Building in C++ mode caught a bug here:
.../src/gdb/darwin-nat.c: In function 'ptid_t darwin_decode_message(mach_msg_header_t*, darwin_thread_t**, inferior**, target_waitstatus*)':
.../src/gdb/darwin-nat.c:1016:25: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
status->value.sig = WTERMSIG (wstatus);
^
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
Pedro Alves [Wed, 20 Apr 2016 19:15:21 +0000 (20:15 +0100)]
Fix "incompatible pointer type" warning in gdb/aarch64-tdep.c
Fixes, with x86_64-apple-darwin15-gcc (gcc 5.3.0):
.../src/gdb/aarch64-tdep.c: In function 'aarch64_record_load_store':
.../src/gdb/aarch64-tdep.c:3479:67: error: passing argument 3 of 'regcache_raw_read_unsigned' from incompatible pointer type [-Werror=incompatible-pointer-types]
bits (aarch64_insn_r->aarch64_insn, 16, 20), ®_rm_val);
^
In file included from .../src/gdb/regcache.h:23:0,
from .../src/gdb/gdbarch.h:69,
from .../src/gdb/defs.h:620,
from .../src/gdb/aarch64-tdep.c:21:
.../src/gdb/common/common-regcache.h:60:29: note: expected 'ULONGEST * {aka long unsigned int *}' but argument is of type 'uint64_t * {aka long long unsigned int *}'
extern enum register_status regcache_raw_read_unsigned
^
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_record_load_store): Change type of
'reg_rm_val' local to ULONGEST.
Pedro Alves [Wed, 20 Apr 2016 20:42:57 +0000 (21:42 +0100)]
gdb/darwin-nat.c: Fix "cast to pointer from integer of different size" warning
Fixes, with gcc 5.3.0:
.../src/gdb/darwin-nat.c: In function 'void darwin_resume_thread(inferior*, darwin_thread_t*, int, int)':
.../src/gdb/darwin-nat.c:731:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(caddr_t)thread->gdb_port, nsignal);
^
.../src/gdb/darwin-nat.c:84:35: note: in definition of macro 'PTRACE'
darwin_ptrace(#CMD, CMD, (PID), (ADDR), (SIG))
^
thread->gdb_port is an unsigned int, caddr_t is a void pointer.
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
H.J. Lu [Wed, 20 Apr 2016 18:15:05 +0000 (11:15 -0700)]
Check R_386_NONE/R_X86_64_NONE in eh6.d
There is no need for run-time relocation when converting pointers
in .eh_frame section to DW_EH_PE_pcrel encoding. R_386_NONE and
R_X86_64_NONE are expected since the space for run-time relocation
has been allocated. This is an optimization.
PR ld/19972
* testsuite/ld-elf/eh6.d: Pass -rW to readelf and check for
R_386_NONE or R_X86_64_NONE.
H.J. Lu [Wed, 20 Apr 2016 18:10:21 +0000 (11:10 -0700)]
Check run-time R_X86_64_32 relocation overflow
Since elf_x86_64_check_relocs is called after opening all input files,
we can detect dynamic R_X86_64_32 relocation overflow there.
bfd/
PR ld/19969
* elf64-x86-64.c (check_relocs_failed): New.
(elf_x86_64_need_pic): Moved before elf_x86_64_check_relocs.
Support relocation agaist local symbol. Set check_relocs_failed.
(elf_x86_64_check_relocs): Use elf_x86_64_need_pic. Check
R_X86_64_32 relocation overflow.
(elf_x86_64_relocate_section): Skip if check_relocs failed.
Update one elf_x86_64_need_pic and remove one elf_x86_64_need_pic.
ld/
PR ld/19969
* testsuite/ld-x86-64/pr19969.d: New file.
* testsuite/ld-x86-64/pr19969a.S: Likewise.
* testsuite/ld-x86-64/pr19969b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr19969 tests.
H.J. Lu [Wed, 20 Apr 2016 12:26:37 +0000 (05:26 -0700)]
Check ELF relocs after opening all input files
Delaying checking ELF relocations until opening all input files so
that symbol information is final when relocations are checked. This
is only enabled for x86 targets.
bfd/
* elf-bfd.h (_bfd_elf_link_check_relocs): New.
* elflink.c (_bfd_elf_link_check_relocs): New function.
(elf_link_add_object_symbols): Call _bfd_elf_link_check_relocs
if check_relocs_after_open_input is FALSE.
Yao Qi [Wed, 20 Apr 2016 11:31:53 +0000 (12:31 +0100)]
Move ARM_CPSR_GREGNUM to arch/arm-linux.h
This patch moves macro ARM_CPSR_GREGNUM to arch/arm-linux.h so that it
can be used in GDBserver side.
gdb:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
* arch/arm-linux.h: ... here.
gdb/gdbserver:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c: Include "arch/arm-linux.h".
(arm_fill_gregset): Use ARM_CPSR_GREGNUM rather than magic
number 16.
(arm_store_gregset): Likewise.
Andrew Burgess [Tue, 19 Apr 2016 18:02:27 +0000 (19:02 +0100)]
gas/doc/arc: Add nps400 references into the documentation
Add nps400 to the list of acceptable values for the -mcpu command line
switch, and to the .cpu directive.
I've added an extra cross reference from -mcpu to .cpu to improve
navigation of the documentation.
gas/ChangeLog:
* doc/c-arc.texi (ARC Options): Add nps400 to list of valus for
-mcpu. Add cross reference to .cpu directive from -mcpu option.
(ARC Directives): Add NPS400 to .cpu directive list.
Andrew Burgess [Tue, 19 Apr 2016 16:40:41 +0000 (17:40 +0100)]
arc: Fix relocation formula for ARC_NPS_CMEM16 relocation
The ME modifier was missing from the relocation formula for the
ARC_NPS_CMEM16 relocation, and as such the relocation would not patch
correctly on little endian targets.
include/ChangeLog:
* elf/arc-reloc.def (ARC_NPS_CMEM16): Add ME modifier to formula.
Matthew Wahab [Wed, 20 Apr 2016 08:31:49 +0000 (09:31 +0100)]
[AArch64] Support RAS extension for ARMv8 onwards.
The RAS extension was introduced as part of the ARMv8.2 architecture
where it is a required feature. It is also available as an optional
feature for ARMv8 and ARMv8.1. In binutils, the RAS extension is
currently enabled by default for -march=armv8.2-a but is not available
for -march=armv8 or -march=armv8.1-a.
This patch adds the feature extension '+ras' to enable the RAS extension
for ARMv8 and ARMv8.1, it is disabled by default.
gas/
2016-04-20 Matthew Wahab <matthew.wahab@arm.com>
John Baldwin [Tue, 19 Apr 2016 20:51:05 +0000 (13:51 -0700)]
Cast the pointer assigned to ss_sp to char *.
FreeBSD versions older than 11.0 use char * as the type of ss_sp in
stack_t instead of the standards-defined void *. C++ allows a char *
pointer to be converted to a void *, so it is safe to cast the return
value of xmalloc to char * if ss_sp is either a char * or void *.
Just always use the cast to char * since that is less ugly than having
to add a special case.
gdb/ChangeLog:
* main.c (setup_alternate_signal_stack): Cast to char *.
Andrew Burgess [Thu, 31 Mar 2016 18:51:14 +0000 (19:51 +0100)]
opcodes/arc: Add more nps instructions
Add dctcp, dcip, dcet, and dcacl instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-4.d: New file.
* testsuite/gas/arc/nps400-4.s: New file.
* testsuite/gas/arc/nps400-5.d: New file.
* testsuite/gas/arc/nps400-5.s: New file.
include/ChangeLog:
* opcode/arc.h (insn_class_t): Add NET and ACL class.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions.
In the previous patch a new set of target descriptions
(i386|amd64)-avx-mpx were added being same as the (i386|amd64)-mpx.
This patch removes AVX feature from (i386|amd64)-mpx target
description set.
This way the (i386|amd64)avx_mpx(_linux|) set has AVX and MPX features
and (i386|amd64)mpx(_linux|) only MPX.
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
Pedro Alves [Mon, 18 Apr 2016 16:42:50 +0000 (17:42 +0100)]
Fix PR gdb/19250: ptrace prototype is not detected properly in C++ mode
The ptrace args/return types detection doesn't work properly in C++
mode, on non-GNU/Linux hosts. For example, on gcc70 (NetBSD 5.1),
where the prototype is:
int ptrace(int, __pid_t, void*, int);
configure misdetects it as:
$ grep PTRACE_TYPE config.h
#define PTRACE_TYPE_ARG1 int
#define PTRACE_TYPE_ARG3 int *
#define PTRACE_TYPE_ARG4 int
/* #undef PTRACE_TYPE_ARG5 */
#define PTRACE_TYPE_RET int
resulting in:
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_fetch_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:56: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_store_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c:110: warning: dereferencing type-punned pointer will break strict-aliasing rules
We could address this [1], however despite ptrace.m4's claim:
# Needs to be tested in C++ mode, to detect whether we need to cast
# the first argument to enum __ptrace_request.
it appears that there's actually no need to test in C++ mode. Always
running the ptrace tests in C mode works just the same on GNU/Linux.
I remember experimenting with several different ways to handle the
original issue back then, and maybe that was needed in some other
attempt and then I didn't realize it ended up not really necessary.
Confirmed that this fixes the NetBSD 5.1 C++ build, and confirmed that
C and C++ builds on Fedora 23 are unaffected.
Martin Galvan [Mon, 18 Apr 2016 13:58:14 +0000 (10:58 -0300)]
Fix gdb crash when trying to print the address of a synthetic C++ reference
After compiling a program which uses C++ references some optimizations may
convert the references into synthetic "pointers". Trying to print the address
of one of such synthetic references causes gdb to crash with the following
error:
(gdb) print &ref
/build/buildd/gdb-7.7.1/gdb/dwarf2loc.c:1624: internal-error: Should not be able to create a lazy value with an enclosing type
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Apparently, what was causing it was that value_addr returns a copy of the value
that represents the reference with its type set to T* instead of T&. However,
its enclosing_type is left untouched, which fails a check made in
read_pieced_value. We only see the crash happen for references that are
synthetic because they're treated as pieced values, thus the call to
read_pieced_value.
On a related note, it seems that in general there are all sorts of breakage
when working with synthetic references. This is reported here:
Bernhard Heckel [Thu, 7 Apr 2016 08:28:14 +0000 (10:28 +0200)]
fortran: Testsuite, fix different type naming across compilers.
Gfortran and ifort have different names for data types. Encapsulate
type names in a library to increase number of supported compilers.
gfortran -4.2 : int4
gfortran>=4.3 : integer(kind=4)
ifort : INTEGER(4)
2016-04-18 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/testsuite/Changelog:
* gdb.fortran/common-block.exp: Use type naming defined in lib fortran.
* gdb.fortran/derived-type.exp: Use type naming defined in lib fortran.
* gdb.fortran/multi-dim.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-datatypes.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-ptype-sub.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-ptype.exp: Use type naming defined in lib fortran.
* gdb.fortran/whatis_type.exp: Use type naming defined in lib fortran.
* lib/fortran.exp (fortran_int4): New procedure.
(fortran_real4, fortran_real8, fortran_complex4): Likewise.
(fortran_logical4): Likewise.
Matthew Fortune [Thu, 14 Apr 2016 10:49:53 +0000 (11:49 +0100)]
Add new NOCROSSREFS_TO linker script command
NOCROSSREFS_TO is similar to the existing NOCROSSREFS command but only
checks one direction of cross referencing.
ld/ChangeLog
* ld.texinfo: Document NOCROSSREFS_TO script command.
* ldlang.h (struct lang_nocrossrefs): Add onlyfirst field.
(lang_add_nocrossref_to): New prototype.
* ldcref.c (check_local_sym_xref): Use onlyfirst to only look for
symbols defined in the first section.
(check_nocrossref): Likewise.
* ldgram.y (NOCROSSREFS_TO): New script command.
* ldlang.c (lang_add_nocrossref): Set onlyfirst to FALSE.
(lang_add_nocrossref_to): New function.
* ldlex.l (NOCROSSREFS_TO): New token.
* NEWS: Mention NOCROSSREFS_TO.
* testsuite/ld-scripts/cross4.t: New file.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
* testsuite/ld-scripts/crossref.exp: Run 4 new NOCROSSREFS_TO
tests.
Presumably this was supposed to be regname[sizeof (regname) - 1] but was typoed
to regname[sizeof (rename) - 1]. However that should be unnecessary because
sprintf should null terminate. As is this assignment is invalid ISO C because
rename refers to the function rename (), and sizeof on functions is undefined.
In GNU C C the size of functions is 1 so the expression is the same as
regname[0]. The following call to sprintf () clearly will over right that, so
the statement either has no effect or is invalid. Given that it seems safe to
just remove it. While we are there correct the size of regname, and switch
from snprintf to sprintf since we know the exact length of the result.
Pedro Alves [Sat, 16 Apr 2016 00:24:08 +0000 (01:24 +0100)]
gdb/ada-exp.y: Remap yydefred
On:
$ uname -a
NetBSD gcc70.fsffrance.org 5.1 NetBSD 5.1 (GENERIC) #0: Sat Nov 6 13:19:33 UTC 2010 builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC amd64
The link fails with:
(...)
d-exp.o: In function `parse_number':
../../src/gdb/d-exp.y:762: multiple definition of `yydefred'
ada-exp.o:/home/palves/gdb/build/gdb/ada-lex.c:925: first defined here
ld: Warning: size of symbol `yydefred' changed from 464 in ada-exp.o to 336 in d-exp.o
Makefile:1404: recipe for target 'gdb' failed
NetBSD's yacc uses a "yydefred" symbol that we missed renaming in the
Ada parser. All other gdb parsers do this already.
gdb/ChangeLog:
2016-04-16 Pedro Alves <palves@redhat.com>
Pedro Alves [Fri, 15 Apr 2016 16:08:53 +0000 (17:08 +0100)]
Fix gdb build with --enable-build-with-cxx --disable-nls
Compiling gdb with --enable-build-with-cxx --disable-nls, we get:
.../src/gdb/ada-lang.c:7657:16: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
type_str = (type != NULL
^
In file included from .../src/gdb/common/common-defs.h:67:0,
from .../src/gdb/defs.h:28,
from .../src/gdb/ada-lang.c:21:
.../src/gdb/common/gdb_locale.h:40:27: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
# define _(String) (String)
^
.../src/gdb/ada-lang.c:7730:46: note: in expansion of macro ‘_’
char *name_str = name != NULL ? name : _("<null>");
^
Makefile:1140: recipe for target 'ada-lang.o' failed
gdb/ChangeLog:
2016-04-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
'name_str' locals.
Pedro Alves [Fri, 15 Apr 2016 22:52:00 +0000 (23:52 +0100)]
MIPS/Linux: Also recognize TRAP_BRKPT and TRAP_HWBKPT
This makes the MIPS Linux backends recognize TRAP_BRKPT and
TRAP_HWBKPT in siginfo.si_code in addition to SI_KERNEL, since Linux
4.6 now reports the finer-grained si_code values too.
On kernels that report SI_KERNEL (<= 4.5), we'll enter the "ambiguous"
path of save_stop_reason:
if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)
&& GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code))
{
/* The si_code is ambiguous on this arch -- check debug
registers. */
if (!check_stopped_by_watchpoint (lp))
lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
}
while on kernels that report the finer-grained si_code values (>= 4.6),
we'll enter the corresponding branches:
else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code))
{
}
else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code))
{
...
gdb/ChangeLog:
2016-04-15 Pedro Alves <palves@redhat.com>
* nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
accept TRAP_BRKPT.
[__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
Yao Qi [Fri, 15 Apr 2016 14:30:01 +0000 (15:30 +0100)]
[ARM] minor opt in thumb_stack_frame_destroyed_p
thumb_stack_frame_destroyed_p scans the instructions from PC to the
end of the function, but if PC is far from the end of pc, we don't
have to scan, because PC should be in epilogue if it is still
far from the end of the function. The criterion I use here is 16
bytes, which is more than 4 instructions.
Regression tested on aarch64-linux with mutli-arch debug.
gdb:
2016-04-15 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
PC is far from the end of function.
They are only used in one file, so we might as well restrict there scope to
that file, and theoretically this might slightly improve compilers ability to
optimize usage of these variables.
Andrew Burgess [Tue, 29 Mar 2016 23:02:19 +0000 (00:02 +0100)]
arc/nps400 : New cmem instructions and associated relocation
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
Andrew Burgess [Wed, 6 Apr 2016 17:55:23 +0000 (18:55 +0100)]
bfd/arc: Rename enum entries to avoid conflicts
In bfd/elf32-arc.c an enum is created that contains entries with generic
names like 'NONE' and 'OFF'. This has been fine for now, but I had a
need to include opcode/arc.h into bfd/elf32-arc.c. Unfortunately
opcode/arc.h includes a different enum with identical generic names.
Given that changing the enum in the header file could mean wide-ranging
changes, while changing the enum in the .c file is limited to only
changing the one file, I've added a prefix to the enum in the .c file.
This commit does not add the new include, that will come later. There
should be no functional change with this commit.
bfd/ChangeLog:
* elf32-arc.c (tls_got_entries): Add 'TLS_GOT_' prefix to all
entries.
(elf_arc_relocate_section): Update enum uses.
(elf_arc_check_relocs): Likewise.
(elf_arc_finish_dynamic_symbol): Likewise.
Andrew Burgess [Thu, 24 Mar 2016 16:54:37 +0000 (16:54 +0000)]
opcodes/arc: Move instruction length logic to new function
Move the logic that calculates the instruction length out to a new
function. Restructure the code to make it simpler.
opcodes/ChangeLog:
* arc-dis.c (arc_insn_length): New function.
(print_insn_arc): Use arc_insn_length, change insnLen to unsigned.
(find_format): Change insnLen parameter to unsigned.
H.J. Lu [Thu, 14 Apr 2016 15:36:32 +0000 (08:36 -0700)]
Replace "link" with "sh_link"
On Linux/x86, GCC 4.2 issues a warning:
bfd/elf.c: In function ‘_bfd_elf_copy_private_bfd_data’:
bfd/elf.c:1334: warning: declaration of ‘link’ shadows a global declaration
/usr/include/unistd.h:757: warning: shadowed declaration is here
make[6]: *** [elf.lo] Error 1
Replace "link" with "sh_link" fixes it.
* elf.c (_bfd_elf_copy_private_bfd_data): Replace "link" with
"sh_link".
Pedro Alves [Thu, 14 Apr 2016 11:58:03 +0000 (12:58 +0100)]
Avoid "format not a string literal" warnings
On:
$ uname -a
NetBSD gcc70.fsffrance.org 5.1 NetBSD 5.1 (GENERIC) #0: Sat Nov 6 13:19:33 UTC 2010 builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC amd64
cc1plus: warnings being treated as errors
../../src/gdb/ctf.c: In function 'void ctf_save_metadata_header(trace_write_handler*)':
../../src/gdb/ctf.c:267: warning: format not a string literal, argument types not checked
cc1plus: warnings being treated as errors
../../src/gdb/cli/cli-cmds.c: In function 'void alias_command(char*, int)':
../../src/gdb/cli/cli-cmds.c:1428: warning: format not a string literal and no format arguments
../../src/gdb/cli/cli-cmds.c:1457: warning: format not a string literal and no format arguments
gdb/ChangeLog:
2016-04-14 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (alias_usage_error): New function.
(alias_command): Use it.
* ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
ctf_save_write_metadata call.
$ uname -a
NetBSD gcc70.fsffrance.org 5.1 NetBSD 5.1 (GENERIC) #0: Sat Nov 6 13:19:33 UTC 2010 builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC amd64
../../src/gdb/ada-typeprint.c: In function 'void print_fixed_point_type(type*, ui_file*)':
../../src/gdb/ada-typeprint.c:366: warning: passing 'float' for argument 2 to 'DOUBLEST ada_fixed_to_float(type*, LONGEST)'
../../src/gdb/value.c: In function 'LONGEST unpack_long(type*, const gdb_byte*)':
../../src/gdb/value.c:2833: warning: converting to 'LONGEST' from 'DOUBLEST'
../../src/gdb/value.c:2838: warning: converting to 'LONGEST' from 'DOUBLEST'
gdb/ChangeLog:
2016-04-14 Pedro Alves <palves@redhat.com>
* ada-typeprint.c (print_fixed_point_type): Don't pass float as
argument to function expecting LONGEST.
* value.c (unpack_long): Add casts to LONGEST.
Nick Clifton [Thu, 14 Apr 2016 11:04:09 +0000 (12:04 +0100)]
Fix copying Solaris binaries with objcopy.
PR target/19938
bfd * elf-bbfd.h (struct elf_backend_data): New field:
elf_strtab_flags.
New field: elf_backend_set_special_section_info_and_link
* elfxx-target.h (elf_backend_strtab_flags): Define if not already
defined.
(elf_backend_set_special_section_info_and_link): Define if not
already defined.
(elfNN_bed): Use elf_backend_set_special_section_info_and_link and
elf_backend_strtab_flags macros to initialise fields in structure.
* elf.c (_bfd_elf_make_section_from_shdr): Check for SHF_STRINGS
being set even if SHF_MERGE is not set.
(elf_fake_sections): Likewise.
(section_match): New function. Matches two ELF sections based
upon fixed characteristics.
(find_link): New function. Locates a section in a BFD that
matches a section in a different BFD.
(_bfd_elf_copy_private_bfd_data): Copy the sh_info and sh_link
fields of reserved sections.
(bfd_elf_compute_section_file_positions): Set the flags for the
.shstrtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
(swap_out_syms): Likewise for the .strtab section.
* elflink.c (bfd_elf_final_link): Set the flags for the
.strtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
* elf32-i386.c (elf32_i386_set_special_info_link): New function.
(elf_backend_strtab_flags): Set to SHF_STRINGS for Solaris
targets.
(elf_backend_set_special_section_info_and_link): Define for
Solaris targets.
* elf32-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
binutils* testsuite/binutils-all/i386/compressed-1b.d: Allow for the
string sections possibly having the SHF_STRINGS flag bit set.
* testsuite/binutils-all/i386/compressed-1c.d: Likewise.
* testsuite/binutils-all/readelf.s: Likewise.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/x86-64/compressed-1b.d: Likewise.
* testsuite/binutils-all/x86-64/compressed-1c.d: Likewise.
gas * testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
sections possibly having the SHF_STRINGS flag bit set.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
Luis Machado [Wed, 13 Apr 2016 20:22:14 +0000 (15:22 -0500)]
Test GDB connection to GDBserver with no symbol files
This test exercises the scenarios where we attempt to connect GDB to GDBserver
in standard remote mode, query the symbol file path, attempt to open said
symbol file on GDB's end and fail, causing the connection to drop abruptly.
Regression-tested on x86-64/Ubuntu.
With an unpatched GDB we should see this:
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: action=permission: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: action=delete: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=target:: action=permission: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=target:: action=delete: connection to GDBserver succeeded (the program is no longer running)
A patched GDB should have full passes.
gdb/testsuite/ChangeLog:
2016-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.server/connect-with-no-symbol-file.c: New file.
* gdb.server/connect-with-no-symbol-file.exp: New file.
Luis Machado [Wed, 13 Apr 2016 20:17:22 +0000 (15:17 -0500)]
Debugging without a binary (regression)
When we attempt to debug a process using GDBserver in standard remote mode
without a symbol file on GDB's end, we may run into an issue where GDB cuts
the connection attempt short due to an error. The error is caused by not
being able to open a symbol file, like so:
--
(gdb) set sysroot
(gdb) tar rem :2345
Remote debugging using :2345
/proc/23769/exe: Permission denied.
(gdb) i r
The program has no registers now.
(gdb)
It should've been like this:
(gdb) set sysroot
(gdb) tar rem :2345
Remote debugging using :2345
warning: /tmp/symbol-file: Permission denied.
0xf7ddb2d0 in ?? ()
(gdb) i r
eax 0x0 0
ecx 0x0 0
edx 0x0 0
ebx 0x0 0
esp 0xffffdfa0 0xffffdfa0
ebp 0x0 0x0
esi 0x0 0
edi 0x0 0
eip 0xf7ddb2d0 0xf7ddb2d0
eflags 0x200 [ IF ]
cs 0x33 51
ss 0x2b 43
ds 0x0 0
es 0x0 0
fs 0x0 0
gs 0x0 0
(gdb)
This is caused by a couple of function calls within exec_file_locate_attach
that can potentially throw errors.
The following patch guards both exec_file_attach and symbol_file_add_main to
prevent the errors from disrupting the connection process.
* config/tc-arc.c (mach_type_specified_p): Change type to
bfd_boolean.
(arc_option): Set private flags when parsing cpu pseudo-op.
(md_parse_option): Set mach_type_specified_p to TRUE.
Simon Marchi [Wed, 13 Apr 2016 14:47:29 +0000 (10:47 -0400)]
Fix and improve comment in gdb_remote_download
This patch fixes the current comment in gdb_remote_download, which is
false (the "except if that's already where it is" part). It also
improves it, by explaining why pass TOFILE through standard_output_file,
even it is an absolute path.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_remote_download): Fix and extend comment.
Nick Clifton [Wed, 13 Apr 2016 14:37:55 +0000 (15:37 +0100)]
Add support to readelf for detecting and reporting Solaris specific section types and symbol visibility.
PR target/19983
* readelf.c (get_solaris_section_type): New function: Returns the
name of Solaris specific section types.
(get_solaris_dynamic_type): New function: Return the name of
Solaris specific dynamic types.
(get_dynamic_type): Use get_solaris_dynamic_type.
(get_section_type_name): Use get_solaris_section_type.
(get_solaris_symbol_visibility): New function: Returns Solaris
specific symbol visibilities.
(print_dynamic_symbol): Use get_solaris_symbol_visibility.
(process_symbol_table): Likewise.
Andrew Burgess [Tue, 12 Apr 2016 10:04:19 +0000 (11:04 +0100)]
ld/testsuite: Initialise a variable to prevent tcl errors
In some cases a variable could be left uninitialised and then an attempt
made to read this variable, resulting in a tcl error. This commit
initialises the variable in all cases.
Simon Marchi [Wed, 13 Apr 2016 14:15:40 +0000 (10:15 -0400)]
gdbserver-base.exp: Copy file to standard output directory in ${board}_download
gdbserver-base.exp is used as the base for both native-gdbserver.exp and
native-extended-gdbserver.exp. (Despite its name, it should really be
considered as a "local-gdbserver-base", as it's not really appropriate to
implement a remote gdbserver board.)
Currently, the _download procedure is implemented as a no-op (it returns
the source file path). Because of the SONAME change, The fast
tracepoint tests now require the executable and the IPA
(libinproctrace.so) to be located in the same directory (see [1]). When
using the native-gdbserver board, because _download returns the original
file path, the executable does not end up in the same directory as the
library, and it fails to execute.
In more general terms, with the recent changes, the testsuite now
assumes that when it does
where the destination paths are relative (generally just the file name),
both files will end up in the same base directory. That assumption does
not hold for the current implementation in gdbserver-base.exp.
The proper fix would be to make native-gdbserver non-remote, so that
gdb_remote_download would not call DejaGnu's remote_download (see [2]).
We could then get rid of ${board}_download in gdbserver-base.exp.
However, that will likely take some time to complete. In the mean time,
in order to make the fast tracepoint tests pass, we can simply copy the
file to the standard output directory. Basically, it just mimics what
gdb_remote_download would do if the board wasn't flagged as remote.
Note that I missed these failures originally because I had a
libinproctrace.so in /usr/local/lib. So, even though libinproctrace.so
wasn't copied to the test output directory, it did find the one in
/usr/local/lib. It would be nice to find a way to protect against this,
as it could easily happen again...
Regtested with unix, native-gdbserver and native-extended-gdbserver, and
didn't see anything notable, except the ftrace tests now passing for
native-gdbserver.
Pedro Alves [Wed, 13 Apr 2016 13:34:00 +0000 (14:34 +0100)]
Fix PR remote/19840: gdb crashes on reverse-stepi
Reverse debugging against a remote target that does reverse debugging
itself (with the bs/bc packets) always trips on:
(gdb) target remote localhost:...
(gdb) reverse-stepi
../../gdb/target.c:602: internal-error: default_execution_direction: to_execution_direction must be implemented for reverse async
I missed adding a to_execution_direction method to remote.c in commit 3223143295b5 (Adds target_execution_direction to make record targets
support async mode), GDB 7.4 time. Later, GDB 7.8 switched to
target-async on by default, making the regression user-visible by
default too.
Fix is simply to add the missing to_execution_direction implementation
to target remote.
Tested by Andi Kleen against Simics.
gdb/ChangeLog:
2016-04-13 Pedro Alves <palves@redhat.com>
PR remote/19840
* remote.c (struct remote_state) <last_resume_exec_dir>: New
field.
(new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
(remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
(remote_resume): Store the last execution direction.
(remote_execution_direction): New function.
(init_remote_ops): Install it as to_execution_direction target_ops
method.
MIPS/GAS: Correct branch relaxation for weak symbols
Weak symbols can be preempted at link time so always choose the longer
sequence in branch relaxation, according to the relaxation level chosen,
so that any symbol finally used as the branch target is reachable.
2016-04-13 Maciej W. Rozycki <macro@imgtec.com>
Andrew Bennett <andrew.bennett@imgtec.com>
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the target is a weak symbol.
(relaxed_micromips_32bit_branch_length): Likewise.
(relaxed_micromips_16bit_branch_length): Likewise.
* testsuite/gas/mips/branch-weak-1.d: New test.
* testsuite/gas/mips/branch-weak-2.d: New test.
* testsuite/gas/mips/branch-weak-3.d: New test.
* testsuite/gas/mips/branch-weak-4.d: New test.
* testsuite/gas/mips/branch-weak-5.d: New test.
* testsuite/gas/mips/branch-weak.l: New stderr output.
* testsuite/gas/mips/branch-weak.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
MIPS/GAS: Relax branches to symbols resolved at link time
Where branch relaxation is enabled emit the long sequence for branches
whose distance cannot be determined, i.e. to symbols that are undefined
or in a different segment. These symbols are only resolved at link time
and therefore the longer sequence ensures the branch target is in range,
which cannot be guaranteed with a direct branch.
This is the opposite to the current implementation, originally proposed
here: <https://sourceware.org/ml/binutils/2002-09/msg00218.html>. The
proposal was then extensively discussed before the final version was
posted here: <https://sourceware.org/ml/binutils/2002-10/msg00191.html>
and eventually committed:
The case considered here was not commented in the review however and the
original version remains. With branch relaxation enabled it makes more
sense to do it consistently, so that all code impure with respect to
branch distances can be linked. Direct branches are still produced for
the cases concerned where branch relaxation is disabled, which is the
default.
gas/
* config/tc-mips.c (relaxed_branch_length): Use the long
sequence where the distance cannot be determined.
(relaxed_micromips_32bit_branch_length): Likewise.
* testsuite/gas/mips/branch-extern-1.d: New test.
* testsuite/gas/mips/branch-extern-2.d: New test.
* testsuite/gas/mips/branch-extern-3.d: New test.
* testsuite/gas/mips/branch-extern-4.d: New test.
* testsuite/gas/mips/branch-extern.l: New stderr output.
* testsuite/gas/mips/branch-extern.s: New test source.
* testsuite/gas/mips/branch-section-1.d: New test.
* testsuite/gas/mips/branch-section-2.d: New test.
* testsuite/gas/mips/branch-section-3.d: New test.
* testsuite/gas/mips/branch-section-4.d: New test.
* testsuite/gas/mips/branch-section.l: New stderr output.
* testsuite/gas/mips/branch-section.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Pedro Alves [Tue, 12 Apr 2016 16:49:24 +0000 (17:49 +0100)]
[C++] Switch TRY/CATCH to real C++ try/catch by default again
Now that we don't ever throw GDB exceptions from signal handlers [1],
we can switch back to having TRY/CATCH implemented in terms of C++
try/catch instead of sigjmp/longjmp.
Pedro Alves [Tue, 12 Apr 2016 16:20:04 +0000 (17:20 +0100)]
Use setjmp/longjmp for TRY/CATCH instead of sigsetjmp/siglongjmp
Now that we don't ever throw GDB exceptions from signal handlers [1],
we can switch to have TRY/CATCH implemented in terms of plain
setjmp/longjmp instead of sigsetjmp/siglongjmp.
In https://sourceware.org/ml/gdb-patches/2015-02/msg00114.html, Yichun
Zhang mentions a 11%/14%+ speedup in his GDB python scripts with a
patch that did something similar to only a specific set of TRY/CATCH
calls.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <buf>: Now a
'jmp_buf' instead of SIGJMP_BUF.
(exceptions_state_mc_init): Change return type to 'jmp_buf'.
(throw_exception): Use longjmp instead of SIGLONGJMP.
* common/common-exceptions.h: Include <setjmp.h> instead of
"gdb_setjmp.h".
(exceptions_state_mc_init): Change return type to 'jmp_buf'.
[GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
SIGSETJMP.
* cp-support.c: Include "gdb_setjmp.h".
Pedro Alves [Tue, 12 Apr 2016 15:49:32 +0000 (16:49 +0100)]
Eliminate immediate_quit
This finally gets rid of immediate_quit (and surrounding
infrustruture), as nothing sets it anymore.
gdb_call_async_signal_handler was only necessary in order to handle
immediate_quit. We can just call mark_async_signal_handler directly
on all hosts now.
In turn, we can clean up mingw-hdep.c's gdb_select a bit, as
sigint_event / sigint_handler is no longer needed.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
Pedro Alves [Tue, 12 Apr 2016 15:49:32 +0000 (16:49 +0100)]
target remote: Don't rely on immediate_quit (introduce quit handlers)
remote.c is the last user of immediate_quit. It's relied on to
immediately break the initial remote connection sync up, if the user
does Ctrl-C, assuming that was because the target isn't responding.
At that stage, since the connection isn't synced yet, disconnecting is
the only safe thing to do. This commit reworks that, to not rely on
throwing from the SIGINT signal handler.
So, this commit:
- Introduces the concept of a "quit handler". This is used to
override what does the QUIT macro do when the quit flag is set.
- Makes the "struct serial" reachar / write code call QUIT in the
partial read/write loops, so the current quit handler is invoked
whenever a serial->read_prim / serial->write_prim returns EINTR.
- Makes the "struct serial" reachar / write code call
interruptible_select instead of gdb_select, so that QUITs are
detected in a race-free manner.
- Stops remote.c from setting immediate_quit during the initial
connection.
- Instead, we install a custom quit handler whenever we're calling
into the serial code. This custom quit handler knows to immediately
throw a quit when we're in the initial connection setup, and
otherwise defer handling the quit/Ctrl-C request to later, when
we're safely out of a packet command/response sequence. This also
is what is now responsible for handling "double Ctrl-C because
target connection is stuck/wedged."
- remote.c no longer installs a specialized SIGINT handlers, and
instead re-uses the quit flag. Since we want to rely on the QUIT
macro, the SIGINT handler must also set the quit. And the easiest
is just to not install custom SIGINT handler in remote.c. Let the
standard SIGINT handler do its job of setting the quit flag.
Centralizing SIGINT handlers seems like a good thing to me, anyway.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h (quit_handler_ftype, quit_handler)
(make_cleanup_override_quit_handler, default_quit_handler): New.
(QUIT): Adjust comments.
* event-top.c (default_quit_handler): New function.
(quit_handler): New global.
(struct quit_handler_cleanup_data): New.
(restore_quit_handler, restore_quit_handler_dtor)
(make_cleanup_override_quit_handler): New.
(async_request_quit): Call QUIT.
* remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
(async_sigint_remote_twice_token, async_sigint_remote_token):
Delete.
(remote_close): Update comments.
(remote_start_remote): Don't set immediate_quit. Set starting_up
earlier.
(remote_serial_quit_handler, remote_unpush_and_throw): New
functions.
(remote_open_1): Clear got_ctrlc_during_io. Set
remote_async_terminal_ours_p unconditionally.
(async_initialize_sigint_signal_handler)
(async_handle_remote_sigint, async_handle_remote_sigint_twice)
(remote_check_pending_interrupt, async_remote_interrupt)
(async_remote_interrupt_twice)
(async_cleanup_sigint_signal_handler, ofunc)
(sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
(remote_terminal_inferior, remote_terminal_ours): Remove async
checks.
(remote_wait_as): Don't install a SIGINT handler in sync mode.
(readchar, remote_serial_write): Override the quit handler with
remote_serial_quit_handler.
(getpkt_or_notif_sane_1): Don't call QUIT.
(initialize_remote_ops): Don't install
remote_check_pending_interrupt.
(_initialize_remote): Don't create async_sigint_remote_token and
async_sigint_remote_twice_token.
* ser-base.c (ser_base_wait_for): Call QUIT and use
interruptible_select.
(ser_base_write): Call QUIT.
* ser-go32.c (dos_readchar, dos_write): Call QUIT.
* ser-unix.c (wait_for): Don't use VTIME. Always take the
gdb_select path, but call QUIT and interruptible_select.
* utils.c (maybe_quit): Call the current quit handler. Don't call
target_check_pending_interrupt.
(defaulted_query, prompt_for_continue): Override the quit handler
with the default quit handler.
Pedro Alves [Tue, 12 Apr 2016 15:49:32 +0000 (16:49 +0100)]
Use target_terminal_ours_for_output in MI
The MI code only does output, so leave raw/cooked mode alone, as well
as the SIGINT handler. Restore terminal settings after output, while
at it. Also, a couple events missed calling target_terminal_ours
before output, even.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* mi/mi-interp.c (mi_new_thread): Put
target_terminal_ours_for_output in effect while outputting.
(mi_thread_exit): Use target_terminal_ours_for_output instead of
target_terminal_ours.
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
(mi_command_param_changed, mi_memory_changed)
(report_initial_inferior): Use target_terminal_ours_for_output
instead of target_terminal_ours. Restore terminal settings.
* mi/mi-main.c (mi_execute_command): Use
target_terminal_ours_for_output instead of target_terminal_ours.
Restore terminal settings.
Pedro Alves [Tue, 12 Apr 2016 15:49:32 +0000 (16:49 +0100)]
Do target_terminal_ours in query & friends instead of in all callers
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
projects / thirdparty / binutils-gdb.git / log
