ASoC: SOF: ipc4-topology: Modify the output format selection logic
Modify the output format selection when there are multiple output
formats available to choose the one that matches the reference params.
The reference params depend on the type of module. In the case of
processing modules, the reference params are based on the selected input
audio format. This would be the case when a processing module does not
perform any format conversion during processing.
The only special case is the copier module. The copier module is capable
of format conversion but it is only used in the case when the output
is fixed to a single format. In the case of a module copier, when there are
multiple formats, the reference params is based on the selected input
params and the output format must match that of the selected input
format. In the case of host copier, the reference params should be
based on the input audio format for playback and the FE hw_params for
capture. In the case DAI copier, the reference params should be based on
the input audio format for capture and the FE hw_params for playback
when there is no format conversion in the pipeline from the host to the
DAI.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515103336.16132-8-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
ASoC: SOF: ipc4-topology: Handle output format special case
The current topologies have input/output formats in pairs and even
though there are multiple output formats, they are all the same. Handle
this case as if there were only one format in topology. Also, add a check
for the number of output formats and reports errors where applicable.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515103336.16132-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
ASoC: SOF: ipc4-topology: Move the call to init output format
In preparation for changing the logic for input/output format selection,
move the call to sof_ipc4_init_output_audio_fmt() into the individual
widget prepare ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515103336.16132-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
ASoC: SOF: ipc4-topology: Handle input/output audio format special case
When there is only one input/output format specified in topology, there
is no need to search for a matching format, simply pick the available
one. This is in preparation to modify and split the selection logic for
the input and output audio formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515103336.16132-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Martin Povišer [Thu, 11 May 2023 15:05:46 +0000 (17:05 +0200)]
ASoC: ssm3515: Add new amp driver
The Analog Devices' SSM3515 is a mono audio amplifier with digital
input, equipped on Apple's 2021 iMacs. Add an ASoC driver for it, and
register both the driver code and schema in MAINTAINERS.
Paweł Anikiel [Mon, 8 May 2023 11:30:37 +0000 (13:30 +0200)]
ASoC: ssm2602: Add workaround for playback distortions
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
Aidan MacDonald [Tue, 9 May 2023 12:42:36 +0000 (13:42 +0100)]
ASoC: jz4740-i2s: Add support for X1000 SoC
The X1000's AIC is similar to the AIC found on other Ingenic SoCs.
It has symmetric playback/capture rates like the JZ4740, but more
flexible clocking when outputting the system or bit clocks.
ASoC: qcom: q6dsp: add support to more display ports
Existing code base only supports one display port, this patch adds
support upto 8 display ports. This support is required to allow platforms
like X13s which have 3 display ports, and some of the Qualcomm SoCs
there are upto 7 Display ports.
Martin Povišer [Tue, 9 May 2023 15:34:12 +0000 (17:34 +0200)]
ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs
A bunch of TI's codecs have binding schemas which force #sound-dai-cells
to one despite those codecs only having a single DAI. Allow for bindings
with zero DAI cells and deprecate the former non-zero value.
Aidan MacDonald [Tue, 9 May 2023 12:51:34 +0000 (13:51 +0100)]
ASoC: jz4740-i2s: Make I2S divider calculations more robust
When the CPU supplies bit/frame clocks, the system clock (clk_i2s)
is divided to produce the bit clock. This is a simple 1/N divider
with a fairly limited range, so for a given system clock frequency
only a few sample rates can be produced. Usually a wider range of
sample rates is supported by varying the system clock frequency.
The old calculation method was not very robust and could easily
produce the wrong clock rate, especially with non-standard rates.
For example, if the system clock is 1.99x the target bit clock
rate, the divider would be calculated as 1 instead of the more
accurate 2.
Instead, use a more accurate method that considers two adjacent
divider settings and selects the one that produces the least error
versus the requested rate. If the error is 5% or higher then the
rate setting is rejected to prevent garbled audio.
Skip divider calculation when the codec is supplying both the bit
and frame clock; in that case, the divider outputs are unused and
we don't want to constrain the sample rate.
Mark Brown [Tue, 9 May 2023 09:31:38 +0000 (18:31 +0900)]
ASoC: add and use asoc_dummy_dlc
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Many ASoC drivers are using dummy DAI.
I have 2 concern about it. 1st one is there is no guarantee that local
strings ("snd-soc-dummy-dai", "snd-soc-dummy") are kept until the card
was binded if it was added at subfunction.
2nd one is we can use common snd_soc_dai_link_component for it.
This patch-set adds common asoc_dummy_dlc, and use it.
Maxim Kochetkov [Fri, 5 May 2023 06:28:20 +0000 (09:28 +0300)]
ASoC: dwc: limit the number of overrun messages
On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.
Shengjiu Wang [Fri, 5 May 2023 07:55:22 +0000 (15:55 +0800)]
ASoC: fsl_sai: MCLK bind with TX/RX enable bit
On i.MX8MP, the sai MCLK is bound with TX/RX enable bit,
which means the TX/RE enable bit need to be enabled then
MCLK can be output on PAD.
Some codec (for example: WM8962) needs the MCLK output
earlier, otherwise there will be issue for codec
configuration.
Add new soc data "mclk_with_tere" for this platform and
enable the MCLK output in startup stage.
As "mclk_with_tere" only applied to i.MX8MP, currently
The soc data is shared with i.MX8MN, so need to add
an i.MX8MN own soc data with "mclk_with_tere" disabled.
Anup Sharma [Sat, 6 May 2023 10:52:09 +0000 (16:22 +0530)]
ASoC: dt-bindings: nau8540: Convert to dtschema
Convert the NAU8540 audio CODEC bindings to DT schema
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com
Changes:
V1 -> V2: Adhere to the correct procedure by including the maintainer's name.
Drop Mark from maintainer.
ASoC: amd: ps: remove the register read and write wrappers.
Instead of acp63_readl() and acp63_writel() wrappers
readl and writel functions can be used directly.
Remove acp63_readl() and acp63_writel() wrappers.
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Maxim Kochetkov [Fri, 5 May 2023 05:35:21 +0000 (08:35 +0300)]
ASoC: dwc: extend supported formats
The COMP1_TX_WORDSIZE_0/COMP2_RX_WORDSIZE_0 fields in the comp
registers indicate the maximum wordsize supported. DWC I2S controller
can operate with any smaller wordsize. So extend the formats to let
I2S to operate in any allowed modes.
Mark Brown [Tue, 25 Apr 2023 17:22:46 +0000 (18:22 +0100)]
ASoC: rt5682: Use a maple tree based register cache
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT5682 seems like a good candidate for maple tree. It only supports single
register read/write operations so will gain minimal benefit from storing
the register data in device native format like rbtree does (none for
SoundWire) and has some sparsity in the register map which is a good fit
for maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
Rob Herring [Fri, 21 Apr 2023 21:48:10 +0000 (16:48 -0500)]
ASoC: dt-bindings: More dropping unneeded quotes
Another batch of dropping unneeded quotes on $id and $schema which were
missed in the last round. Once all these are fixed, checking for this can
be enabled in yamllint.
Mark Brown [Fri, 21 Apr 2023 16:35:46 +0000 (17:35 +0100)]
ASoC: rt715: Use maple tree register cache
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT715 seems like a good candidate for maple tree. It is a SoundWire MBQ
device and therefore supports only single register read/write operations
which do not use raw I/O and will therefore save the cost of converting
to and from device native format when accessing the cache while not having
a negative impact from the current lack of bulk operations in maple tree
cache sync. It has a moderately large and quite sparse register map which
is a good fit for storing in a maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
ASoC: mediatek: mt8195-afe-pcm: Clean up unnecessary functions
Function mt8195_afe_init_registers() performs just a single call to
regmap_multi_reg_write(), it returns int and it's not error checked;
move that call to the probe function and also add some error check.
While at it, also move the contents of mt8195_afe_parse_of() to the
probe function as well: since this is getting a handle to topckgen
and since that's optional, the ifdef for CONFIG_SND_SOC_MT6359 can
also be removed.
ASoC: SOF: mediatek: mt8186: Use snd_sof_ipc_process_reply() helper
Function mt8186_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
ASoC: SOF: mediatek: mt8195: Use snd_sof_ipc_process_reply() helper
Function mt8195_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Linus Torvalds [Sun, 7 May 2023 18:32:18 +0000 (11:32 -0700)]
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Third version of perf tool updates, with the build problems with with
using a 'vmlinux.h' generated from the main build fixed, and the bpf
skeleton build disabled by default.
Build:
- Require libtraceevent to build, one can disable it using
NO_LIBTRACEEVENT=1.
It is required for tools like 'perf sched', 'perf kvm', 'perf
trace', etc.
libtraceevent is available in most distros so installing
'libtraceevent-devel' should be a one-time event to continue
building perf as usual.
Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
sufficient for lots of users not interested in those libtraceevent
dependent features.
- Allow Python support in 'perf script' when libtraceevent isn't
linked, as not all features requires it, for instance Intel PT does
not use tracepoints.
- Error if the python interpreter needed for jevents to work isn't
available and NO_JEVENTS=1 isn't set, preventing a build without
support for JSON vendor events, which is a rare but possible
condition. The two check error messages:
$(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
$(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)
- Make libbpf 1.0 the minimum required when building with out of
tree, distro provided libbpf.
- Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
demangler, add 'perf test' entry for it.
- Make binutils libraries opt in, as distros disable building with it
due to licensing, they were used for C++ demangling, for instance.
- Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
equivalent) isn't installed, we'll just have a build warning:
Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
- Add a feature test for scandirat(), that is not implemented so far
in musl and uclibc, disabling features that need it, such as
scanning for tracepoints in /sys/kernel/tracing/events.
perf BPF filters:
- New feature where BPF can be used to filter samples, for instance:
- In addition to 'period' (PERF_SAMPLE_PERIOD), the other
PERF_SAMPLE_ can be used for filtering, and also some other sample
accessible values, from tools/perf/Documentation/perf-record.txt:
- Allocate single letter option -M for --map-nr-entries, as it is
proving being frequently used.
- Fix struct rq lock access for older kernels with BPF's CO-RE
(Compile once, run everywhere).
- Fix problems found with MSAn.
perf report/top:
- Add inline information when using --call-graph=fp or lbr, as was
already done to the --call-graph=dwarf callchain mode.
- Improve the 'srcfile' sort key performance by really using an
optimization introduced in 6.2 for the 'srcline' sort key that
avoids calling addr2line for comparision with each sample.
perf sched:
- Make 'perf sched latency/map/replay' to use "sched:sched_waking"
instead of "sched:sched_waking", consistent with 'perf record'
since d566a9c2d482 ("perf sched: Prefer sched_waking event when it
exists").
perf ftrace:
- Make system wide the default target for latency subcommand, run the
following command then generate some network traffic and press
control+C:
# perf ftrace latency -T __kfree_skb
^C
DURATION | COUNT | GRAPH |
0 - 1 us | 27 | ############# |
1 - 2 us | 22 | ########### |
2 - 4 us | 8 | #### |
4 - 8 us | 5 | ## |
8 - 16 us | 24 | ############ |
16 - 32 us | 2 | # |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
#
perf top:
- Add --branch-history (LBR: Last Branch Record) option, just like
already available for 'perf record'.
- Fix segfault in thread__comm_len() where thread->comm was being
used outside thread->comm_lock.
perf annotate:
- Allow configuring objdump and addr2line in ~/.perfconfig., so that
you can use alternative binaries, such as llvm's.
perf kvm:
- Add TUI mode for 'perf kvm stat report'.
Reference counting:
- Add reference count checking infrastructure to check for use after
free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
more to come.
To build with it use -DREFCNT_CHECKING=1 in the make command line
to build tools/perf. Documented at:
- The above caught, for instance, fix, present in this series:
- Fix maps use after put in 'perf test "Share thread maps"':
'maps' is copied from leader, but the leader is put on line 79
and then 'maps' is used to read the reference count below - so
a use after put, with the put of maps happening within
thread__put.
Fixed by reversing the order of puts so that the leader is put
last.
- Also several fixes were made to places where reference counts were
not being held.
- Make this one of the tests in 'make -C tools/perf build-test' to
regularly build test it and to make sure no direct access to the
reference counted structs are made, doing that via accessors to
check the validity of the struct pointer.
ARM64:
- Fix 'perf report' segfault when filtering coresight traces by
sparse lists of CPUs.
- Add support for 'simd' as a sort field for 'perf report', to show
ARM's NEON SIMD's predicate flags: "partial" and "empty".
arm64 vendor events:
- Add N1 metrics.
Intel vendor events:
- Add graniterapids, grandridge and sierraforrest events.
- Refresh metrics for alderlake-n, broadwell, broadwellde,
broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
skylakex.
perf stat:
- Implement --topdown using JSON metrics.
- Add TopdownL1 JSON metric as a default if present, but disable it
for now for some Intel hybrid architectures, a series of patches
addressing this is being reviewed and will be submitted for v6.5.
- Use metrics for --smi-cost.
- Update topdown documentation.
Vendor events (JSON) infrastructure:
- Add support for computing and printing metric threshold values. For
instance, here is one found in thesapphirerapids json file:
{
"BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
"MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
"MetricGroup": "smi",
"MetricName": "smi_cycles",
"MetricThreshold": "smi_cycles > 0.1",
"ScaleUnit": "100%"
},
- Test parsing metric thresholds with the fake PMU in 'perf test
pmu-events'.
- Support for printing metric thresholds in 'perf list'.
- Add --metric-no-threshold option to 'perf stat'.
- Add rand (reverse and) and has_pmem (optane memory) support to
metrics.
- Sort list of input files to avoid depending on the order from
readdir() helping in obtaining reproducible builds.
S/390:
- Add common metrics: - CPI (cycles per instruction), prbstate (ratio
of instructions executed in problem state compared to total number
of instructions), l1mp (Level one instruction and data cache misses
per 100 instructions).
- Add cache metrics for z13, z14, z15 and z16.
- Add metric for TLB and cache.
ARM:
- Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
(Memory Tagging Extension) and MOPS (Memory Operations) load/store.
Intel PT hardware tracing:
- Add event type names UINTR (User interrupt delivered) and UIRET
(Exiting from user interrupt routine), documented in table 32-50
"CFE Packet Type and Vector Fields Details" in the Intel Processor
Trace chapter of The Intel SDM Volume 3 version 078.
- Add support for new branch instructions ERETS and ERETU.
- Fix CYC timestamps after standalone CBR
ARM CoreSight hardware tracing:
- Allow user to override timestamp and contextid settings.
- Fix segfault in dso lookup.
- Fix timeless decode mode detection.
- Add separate decode paths for timeless and per-thread modes.
auxtrace:
- Fix address filter entire kernel size.
Miscellaneous:
- Fix use-after-free and unaligned bugs in the PLT handling routines.
- Use zfree() to reduce chances of use after free.
- Add missing 0x prefix for addresses printed in hexadecimal in 'perf
probe'.
- Suppress massive unsupported target platform errors in the unwind
code.
- Fix return incorrect build_id size in elf_read_build_id().
- Add missing new parameter in kfree_skb tracepoint to the python
scripts using it.
- Add 'perf bench syscall fork' benchmark.
- Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
'perf mem'.
- Fix wrong size expectation for perf test 'Setup struct
perf_event_attr' caused by the patch adding
perf_event_attr::config3.
- Fix some spelling mistakes"
* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
Revert "perf build: Warn for BPF skeletons if endian mismatches"
perf metrics: Fix SEGV with --for-each-cgroup
perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
perf stat: Separate bperf from bpf_profiler
perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
perf test record+probe_libc_inet_pton: Fix call chain match on s390
perf tracepoint: Fix memory leak in is_valid_tracepoint()
perf cs-etm: Add fix for coresight trace for any range of CPUs
perf build: Fix unescaped # in perf build-test
perf unwind: Suppress massive unsupported target platform errors
perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
perf script: Print raw ip instead of binary offset for callchain
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
perf list: Modify the warning message about scandirat(3)
perf list: Fix memory leaks in print_tracepoint_events()
perf lock contention: Rework offset calculation with BPF CO-RE
perf lock contention: Fix struct rq lock access
perf stat: Disable TopdownL1 on hybrid
perf stat: Avoid SEGV on counter->name
...
Linus Torvalds [Sun, 7 May 2023 18:04:26 +0000 (11:04 -0700)]
Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects:
The recent fix to ensure atomicity of lookup and allocation
inadvertently broke the pool refill mechanism, so that debugobject
OOMs now in certain situations. The reason is that the functions which
got updated no longer invoke debug_objecs_init(), which is now the
only place to care about refilling the tracking object pool.
Restore the original behaviour by adding explicit refill opportunities
to those places"
* tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Ensure pool refill (again)
Linus Torvalds [Sun, 7 May 2023 17:57:14 +0000 (10:57 -0700)]
Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
Linus Torvalds [Sun, 7 May 2023 17:31:45 +0000 (10:31 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
Linus Torvalds [Sun, 7 May 2023 17:17:33 +0000 (10:17 -0700)]
Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
Linus Torvalds [Sun, 7 May 2023 17:00:09 +0000 (10:00 -0700)]
Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 6 May 2023 18:43:08 +0000 (11:43 -0700)]
Merge tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull dmapool updates - again - from Andrew Morton:
"Reinstate the dmapool changes which were accidentally removed by a
mishap on the last commit in the previous attempt at the series"
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup").
[ The whole old series: def8574308ed..2d55c16c0c54 results in an empty
diff because that last commit ended up being just a revert of all that
came everything before it. - Linus ]
* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
dmapool: link blocks across pages
dmapool: don't memset on free twice
dmapool: simplify freeing
dmapool: consolidate page initialization
dmapool: rearrange page alloc failure handling
dmapool: move debug code to own functions
dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
dmapool: cleanup integer types
dmapool: use sysfs_emit() instead of scnprintf()
dmapool: remove checks for dev == NULL
Linus Torvalds [Sat, 6 May 2023 18:25:03 +0000 (11:25 -0700)]
Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Five hotfixes.
Three are cc:stable, two pertain to merge window changes"
* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
afs: fix the afs_dir_get_folio return value
nilfs2: do not write dirty data after degenerating to read-only
mm: do not reclaim private data from pinned page
nilfs2: fix infinite loop in nilfs_mdt_get_block()
mm/mmap/vma_merge: always check invariants
Keith Busch [Thu, 26 Jan 2023 21:51:24 +0000 (13:51 -0800)]
dmapool: link blocks across pages
The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.
The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.
Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:
The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.
[kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Keith Busch [Thu, 26 Jan 2023 21:51:22 +0000 (13:51 -0800)]
dmapool: simplify freeing
The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function. Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Battersby [Thu, 26 Jan 2023 21:51:17 +0000 (13:51 -0800)]
dmapool: cleanup integer types
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Battersby [Thu, 26 Jan 2023 21:51:15 +0000 (13:51 -0800)]
dmapool: remove checks for dev == NULL
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().
The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").
But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.
And my merge of the two did not fix this up correctly.
The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.
Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.
Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nilfs2: do not write dirty data after degenerating to read-only
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Jan Kara [Fri, 28 Apr 2023 12:41:40 +0000 (14:41 +0200)]
mm: do not reclaim private data from pinned page
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nilfs2: fix infinite loop in nilfs_mdt_get_block()
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.
Lorenzo Stoakes [Sun, 30 Apr 2023 20:19:17 +0000 (21:19 +0100)]
mm/mmap/vma_merge: always check invariants
We may still have inconsistent input parameters even if we choose not to
merge and the vma_merge() invariant checks are useful for checking this
with no production runtime cost (these are only relevant when
CONFIG_DEBUG_VM is specified).
Therefore, perform these checks regardless of whether we merge.
This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
Correctly update prev when policy is equal on mbind") in the mbind logic
was only picked up in the 6.2.y stable branch where these assertions are
performed prior to determining mergeability.
Had this remained the same in mainline this issue may have been picked up
faster, so moving forward let's always check them.
Linus Torvalds [Sat, 6 May 2023 15:37:28 +0000 (08:37 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Six late arriving patches for the merge window. Five are minor
assorted fixes and updates.
The IPR driver change removes SATA support, which will now allow a
major cleanup in the ATA subsystem because it was the only driver
still using the old attachment mechanism. The driver is only used on
power systems and SATA was used to support a DVD device, which has
long been moved to a different hba. IBM chose this route instead of
porting ipr to the newer SATA interfaces"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix use after free bug in qedi_remove()
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
scsi: ipr: Remove several unused variables
scsi: pm80xx: Log device registration
scsi: ipr: Remove SATA support
scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
Linus Torvalds [Sat, 6 May 2023 15:28:58 +0000 (08:28 -0700)]
Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
Linus Torvalds [Sat, 6 May 2023 15:15:20 +0000 (08:15 -0700)]
Merge tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux
Pull nonblocking pipe io_uring support from Jens Axboe:
"Here's the revised edition of the FMODE_NOWAIT support for pipes, in
which we just flag it as such supporting FMODE_NOWAIT unconditionally,
but clear it if we ever end up using splice/vmsplice on the pipe.
The pipe read/write side is perfectly fine for nonblocking IO, however
splice and vmsplice can potentially wait for IO with the pipe lock
held"
* tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux:
pipe: set FMODE_NOWAIT on pipes
splice: clear FMODE_NOWAIT on file if splice/vmsplice is used
Linus Torvalds [Sat, 6 May 2023 15:07:11 +0000 (08:07 -0700)]
Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused a
regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
some documentation updates"
* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
ALSA: pcm: playback silence - move silence variable updates to separate function
ALSA: pcm: playback silence - remove extra code
ALSA: pcm: fix playback silence - correct incremental silencing
ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
ALSA: docs: Fix code block indentation in ALSA driver example
ALSA: docs: Extend module parameters description
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
ALSA: emu10k1: use more existing defines instead of open-coded numbers
ASoC: amd: yc: Add ASUS M3402RA into DMI table
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
...
Linus Torvalds [Sat, 6 May 2023 02:16:58 +0000 (19:16 -0700)]
Merge tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Ten ksmbd server fixes, including some important security fixes:
- Two use after free fixes
- Fix RCU callback race
- Deadlock fix
- Three patches to prevent session setup attacks
- Prevent guest users from establishing multichannel sessions
- Fix null pointer dereference in query FS info
- Memleak fix"
* tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd:
ksmbd: call rcu_barrier() in ksmbd_server_exit()
ksmbd: fix racy issue under cocurrent smb2 tree disconnect
ksmbd: fix racy issue from smb2 close and logoff with multichannel
ksmbd: not allow guest user on multichannel
ksmbd: fix deadlock in ksmbd_find_crypto_ctx()
ksmbd: block asynchronous requests when making a delay on session setup
ksmbd: destroy expired sessions
ksmbd: fix racy issue from session setup and logoff
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
ksmbd: fix memleak in session setup
Linus Torvalds [Sat, 6 May 2023 02:12:01 +0000 (19:12 -0700)]
Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- sched: act_pedit: free pedit keys on bail from offset check
Current release - new code bugs:
- pds_core:
- Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
- fix mutex double unlock in error path
Previous releases - regressions:
- sched: cls_api: remove block_cb from driver_list before freeing
- nf_tables: fix ct untracked match breakage
- eth: mtk_eth_soc: drop generic vlan rx offload
- sched: flower: fix error handler on replace
Previous releases - always broken:
- tcp: fix skb_copy_ubufs() vs BIG TCP
- ipv6: fix skb hash for some RST packets
- af_packet: don't send zero-byte data in packet_sendmsg_spkt()
- rxrpc: timeout handling fixes after moving client call connection
to the I/O thread
- ixgbe: fix panic during XDP_TX with > 64 CPUs
- igc: RMW the SRRCTL register to prevent losing timestamp config
- dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621
- r8152:
- fix flow control issue of RTL8156A
- fix the poor throughput for 2.5G devices
- move setting r8153b_rx_agg_chg_indicate() to fix coalescing
- enable autosuspend
- ncsi: clear Tx enable mode when handling a Config required AEN
- octeontx2-pf: macsec: fixes for CN10KB ASIC rev
Misc:
- 9p: remove INET dependency"
* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
pds_core: fix mutex double unlock in error path
net/sched: flower: fix error handler on replace
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
net/sched: flower: fix filter idr initialization
net: fec: correct the counting of XDP sent frames
bonding: add xdp_features support
net: enetc: check the index of the SFI rather than the handle
sfc: Add back mailing list
virtio_net: suppress cpu stall when free_unused_bufs
ice: block LAN in case of VF to VF offload
net: dsa: mt7530: fix network connectivity with multiple CPU ports
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
9p: Remove INET dependency
netfilter: nf_tables: fix ct untracked match breakage
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
igc: read before write to SRRCTL register
pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
pds_core: remove CONFIG_DEBUG_FS from makefile
ionic: catch failure from devlink_alloc
...
Lukas Bulwahn [Fri, 5 May 2023 22:39:09 +0000 (00:39 +0200)]
s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS
Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.
As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.
Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
projects / thirdparty / kernel / linux.git / log
