Dan Williams [Fri, 27 May 2022 17:57:01 +0000 (10:57 -0700)]
cxl/port: Record parent dport when adding ports
At the time that cxl_port instances are being created, cache the dport
from the parent port that points to this new child port. This will be
useful for region provisioning when walking the tree to calculate
decoder targets, and saves rewalking the dport list after the fact to
build this information.
Dan Williams [Fri, 27 May 2022 07:56:59 +0000 (00:56 -0700)]
cxl/port: Record dport in endpoint references
Recall that the primary role of the cxl_mem driver is to probe if the
given endpoint is connected to a CXL port topology. In that process it
walks its device ancestry to its PCI root port. If that root port is
also a CXL root port then the probe process adds cxl_port object
instances at switch in the path between to the root and the endpoint. As
those cxl_port instances are added, or if a previous enumeration
attempt already created the port, a 'struct cxl_ep' instance is
registered with that port to track the endpoints interested in that
port.
At the time the cxl_ep is registered the downstream egress path from the
port to the endpoint is known. Take the opportunity to record that
information as it will be needed for dynamic programming of decoder
targets during region provisioning.
Dan Williams [Tue, 24 May 2022 01:02:30 +0000 (18:02 -0700)]
cxl/hdm: Add support for allocating DPA to an endpoint decoder
The region provisioning flow will roughly follow a sequence of:
1/ Allocate DPA to a set of decoders
2/ Allocate HPA to a region
3/ Associate decoders with a region and validate that the DPA allocations
and topologies match the parameters of the region.
For now, this change (step 1) arranges for DPA capacity to be allocated
and deleted from non-committed decoders based on the decoder's mode /
partition selection. Capacity is allocated from the lowest DPA in the
partition and any 'pmem' allocation blocks out all remaining ram
capacity in its 'skip' setting. DPA allocations are enforced in decoder
instance order. I.e. decoder N + 1 always starts at a higher DPA than
instance N, and deleting allocations must proceed from the
highest-instance allocated decoder to the lowest.
Dan Williams [Tue, 24 May 2022 19:04:58 +0000 (12:04 -0700)]
cxl/hdm: Track next decoder to allocate
The CXL specification enforces that endpoint decoders are committed in
hw instance id order. In preparation for adding dynamic DPA allocation,
record the hw instance id in endpoint decoders, and enforce allocations
to occur in hw instance id order.
Dan Williams [Mon, 23 May 2022 19:15:35 +0000 (12:15 -0700)]
cxl/hdm: Add 'mode' attribute to decoder objects
Recall that the Device Physical Address (DPA) space of a CXL Memory
Expander is potentially partitioned into a volatile and persistent
portion. A decoder maps a Host Physical Address (HPA) range to a DPA
range and that translation depends on the value of all previous (lower
instance number) decoders before the current one.
In preparation for allowing dynamic provisioning of regions, decoders
need an ABI to indicate which DPA partition a decoder targets. This ABI
needs to be prepared for the possibility that some other agent committed
and locked a decoder that spans the partition boundary.
Add 'decoderX.Y/mode' to endpoint decoders that indicates which
partition 'ram' / 'pmem' the decoder targets, or 'mixed' if the decoder
currently spans the partition boundary.
Dan Williams [Fri, 22 Jul 2022 00:19:12 +0000 (17:19 -0700)]
cxl/hdm: Enumerate allocated DPA
In preparation for provisioning CXL regions, add accounting for the DPA
space consumed by existing regions / decoders. Recall, a CXL region is a
memory range comprised from one or more endpoint devices contributing a
mapping of their DPA into HPA space through a decoder.
Record the DPA ranges covered by committed decoders at initial probe of
endpoint ports relative to a per-device resource tree of the DPA type
(pmem or volatile-ram).
The cxl_dpa_rwsem semaphore is introduced to globally synchronize DPA
state across all endpoints and their decoders at once. The vast majority
of DPA operations are reads as region creation is expected to be as rare
as disk partitioning and volume creation. The device_lock() for this
synchronization is specifically avoided for concern of entangling with
sysfs attribute removal.
Dan Williams [Sat, 21 May 2022 23:24:14 +0000 (16:24 -0700)]
cxl/core: Define a 'struct cxl_endpoint_decoder'
Previously the target routing specifics of switch decoders and platform
CXL window resource tracking of root decoders were factored out of
'struct cxl_decoder'. While switch decoders translate from SPA to
downstream ports, endpoint decoders translate from SPA to DPA.
This patch, 3 of 3, adds a 'struct cxl_endpoint_decoder' that tracks an
endpoint-specific Device Physical Address (DPA) resource. For now this
just defines ->dpa_res, a follow-on patch will handle requesting DPA
resource ranges from a device-DPA resource tree.
Dan Williams [Wed, 13 Jul 2022 01:38:26 +0000 (18:38 -0700)]
cxl/core: Define a 'struct cxl_root_decoder'
Previously the target routing specifics of switch decoders were factored
out of 'struct cxl_decoder' into 'struct cxl_switch_decoder'.
This patch, 2 of 3, adds a 'struct cxl_root_decoder' as a superset of a
switch decoder that also track the associated CXL window platform
resource.
Note that the reason the resource for a given root decoder needs to be
looked up after the fact (i.e. after cxl_parse_cfmws() and
add_cxl_resource()) is because add_cxl_resource() may have merged CXL
windows in order to keep them at the top of the resource tree / decode
hierarchy.
Dan Williams [Wed, 13 Jul 2022 01:37:54 +0000 (18:37 -0700)]
cxl/acpi: Track CXL resources in iomem_resource
Recall that CXL capable address ranges, on ACPI platforms, are published
in the CEDT.CFMWS (CXL Early Discovery Table: CXL Fixed Memory Window
Structures). These windows represent both the actively mapped capacity
and the potential address space that can be dynamically assigned to a
new CXL decode configuration (region / interleave-set).
CXL endpoints like DDR DIMMs can be mapped at any physical address
including 0 and legacy ranges.
There is an expectation and requirement that the /proc/iomem interface
and the iomem_resource tree in the kernel reflect the full set of
platform address ranges. I.e. that every address range that platform
firmware and bus drivers enumerate be reflected as an iomem_resource
entry. The hard requirement to do this for CXL arises from the fact that
facilities like CONFIG_DEVICE_PRIVATE expect to be able to treat empty
iomem_resource ranges as free for software to use as proxy address
space. Without CXL publishing its potential address ranges in
iomem_resource, the CONFIG_DEVICE_PRIVATE mechanism may inadvertently
steal capacity reserved for runtime provisioning of new CXL regions.
So, iomem_resource needs to know about both active and potential CXL
resource ranges. The active CXL resources might already be reflected in
iomem_resource as "System RAM". insert_resource_expand_to_fit() handles
re-parenting "System RAM" underneath a CXL window.
The "_expand_to_fit()" behavior handles cases where a CXL window is not
a strict superset of an existing entry in the iomem_resource tree. The
"_expand_to_fit()" behavior is acceptable from the perspective of
resource allocation. The expansion happens because a conflicting
resource range is already populated, which means the resource boundary
expansion does not result in any additional free CXL address space being
made available. CXL address space allocation is always bounded by the
orginal unexpanded address range.
However, the potential for expansion does mean that something like
walk_iomem_res_desc(IORES_DESC_CXL...) can only return fuzzy answers on
corner case platforms that cause the resource tree to expand a CXL
window resource over a range that is not decoded by CXL. This would be
an odd platform configuration, but if it becomes a problem in practice
the CXL subsytem could just publish an API that returns definitive
answers.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/165784325943.1758207.5310344844375305118.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 19 May 2022 00:52:23 +0000 (17:52 -0700)]
cxl/core: Define a 'struct cxl_switch_decoder'
Currently 'struct cxl_decoder' contains the superset of attributes
needed for all decoder types. Before more type-specific attributes are
added to the common definition, reorganize 'struct cxl_decoder' into type
specific objects.
This patch, the first of three, factors out a cxl_switch_decoder type.
See the new kdoc for what a 'struct cxl_switch_decoder' represents in a
CXL topology.
Ira Weiny [Tue, 19 Jul 2022 20:52:49 +0000 (13:52 -0700)]
cxl/port: Read CDAT table
The per-device CDAT data provides performance data that is relevant for
mapping which CXL devices can participate in which CXL ranges by QTG
(QoS Throttling Group) (per ECN: CXL 2.0 CEDT CFMWS & QTG_DSM) [1]. The
QTG association specified in the ECN is advisory. Until the
cxl_acpi driver grows support for invoking the QTG _DSM method the CDAT
data is only of interest to userspace that may need it for debug
purposes.
Search the DOE mailboxes available, query CDAT data, cache the data and
make it available via a sysfs binary attribute per endpoint at:
/sys/bus/cxl/devices/endpointX/CDAT
...similar to other ACPI-structured table data in
/sys/firmware/ACPI/tables. The CDAT is relative to 'struct cxl_port'
objects since switches in addition to endpoints can host a CDAT
instance. Switch CDAT support is not implemented.
This does not support table updates at runtime. It will always provide
whatever was there when first cached. It is also the case that table
updates are not expected outside of explicit DPA address map affecting
commands like Set Partition with the immediate flag set. Given that the
driver does not support Set Partition with the immediate flag set there
is no current need for update support.
Link: https://www.computeexpresslink.org/spec-landing Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
[djbw: drop in-kernel parsing infra for now, and other minor fixups] Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220719205249.566684-7-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ira Weiny [Tue, 19 Jul 2022 20:52:48 +0000 (13:52 -0700)]
driver-core: Introduce BIN_ATTR_ADMIN_{RO,RW}
Many binary attributes need to limit access to CAP_SYS_ADMIN only; ie
many binary attributes specify is_visible with 0400 or 0600.
Make setting the permissions of such attributes more explicit by
defining BIN_ATTR_ADMIN_{RO,RW}.
Cc: Bjorn Helgaas <bhelgaas@google.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-6-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ira Weiny [Tue, 19 Jul 2022 20:52:47 +0000 (13:52 -0700)]
cxl/pci: Create PCI DOE mailbox's for memory devices
DOE mailbox objects will be needed for various mailbox communications
with each memory device.
Iterate each DOE mailbox capability and create PCI DOE mailbox objects
as found.
It is not anticipated that this is the final resting place for the
iteration of the DOE devices. The support of switch ports will drive
this code into the PCIe side. In this imagined architecture the CXL
port driver would then query into the PCI device for the DOE mailbox
array.
For now creating the mailboxes in the CXL port is good enough for the
endpoints. Later PCIe ports will need to support this to support switch
ports more generically.
Cc: Dan Williams <dan.j.williams@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-5-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jonathan Cameron [Tue, 19 Jul 2022 20:52:46 +0000 (13:52 -0700)]
PCI/DOE: Add DOE mailbox support functions
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based
mailbox with standard protocol discovery. Each mailbox is accessed
through a DOE Extended Capability.
Each DOE mailbox must support the DOE discovery protocol in addition to
any number of additional protocols.
Define core PCIe functionality to manage a single PCIe DOE mailbox at a
defined config space offset. Functionality includes iterating,
creating, query of supported protocol, and task submission. Destruction
of the mailboxes is device managed.
Cc: "Li, Ming" <ming4.li@intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-4-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jonathan Cameron [Tue, 19 Jul 2022 20:52:44 +0000 (13:52 -0700)]
PCI: Add vendor ID for the PCI SIG
This ID is used in DOE headers to identify protocols that are defined
within the PCI Express Base Specification, PCIe r6.0, sec 6.30.1.1 table
6-32.
Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220719205249.566684-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 23 Jun 2022 21:58:45 +0000 (14:58 -0700)]
cxl/pmem: Delete unused nvdimm attribute
While there is a need to go from a LIBNVDIMM 'struct nvdimm' to a CXL
'struct cxl_nvdimm', there is no use case to go the other direction.
Likely this is a leftover from an early version of the referenced commit
before it implemented devm for releasing the created nvdimm.
Dan Williams [Tue, 7 Jun 2022 18:21:40 +0000 (11:21 -0700)]
cxl/hdm: Initialize decoder type for memory expander devices
Unless and until accelerator (type-2) drivers start registering for
CXL.mem mapping services from the CXL subsystem core, initialize idle
HDM decoders to the "expander" type. I.e. the only CXL devices using the
CXL core presently are those implementing the CXL 2.0 Type-3 memory
expander device class code that the cxl_pci driver claims.
Dan Williams [Wed, 1 Jun 2022 19:49:32 +0000 (12:49 -0700)]
cxl/port: Cache CXL host bridge data
Region creation has need for checking host-bridge connectivity when
adding endpoints to regions. Record, at port creation time, the
host-bridge to provide a useful shortcut from any location in the
topology to the most-significant ancestor.
Dan Williams [Tue, 24 May 2022 06:26:11 +0000 (23:26 -0700)]
tools/testing/cxl: Add partition support
In support of testing DPA allocation mechanisms in the CXL core, the
cxl_test environment needs to support establishing and retrieving the
'pmem partition boundary.
Replace the platform_device_add_resources() method for delineating DPA
within an endpoint with an emulated DEV_SIZE amount of partitionable
capacity. Set DEV_SIZE such that an endpoint has enough capacity to
simultaneously participate in 8 distinct regions.
Dan Williams [Tue, 24 May 2022 15:56:58 +0000 (08:56 -0700)]
tools/testing/cxl: Expand CFMWS windows
For the x2 host-bridge interleave windows, allow for a
x8-endpoint-interleave configuration per memory-type with each device
contributing the minimum 256MB extent. Similarly, for the x1 host-bridge
interleave windows, allow for a x4-endpoint-interleave configuration per
memory-type.
Bump up the number of decoders per-port to support hosting 8 regions.
Dan Williams [Thu, 23 Jun 2022 01:02:37 +0000 (18:02 -0700)]
tools/testing/cxl: Move cxl_test resources to the top of memory
A recent QEMU upgrade resulted in collisions between QEMU's chosen
location for PCI MMIO and cxl_test's fake address location for emulated
CXL purposes. This was great for testing resource collisions, but not so
great for continuing to test the nominal cases. Move cxl_test to the
top-of-memory where it is less likely to collide with other resources.
Dan Williams [Sun, 10 Jul 2022 16:57:28 +0000 (09:57 -0700)]
cxl/debug: Move debugfs init to cxl_core_init()
In preparation for a new cxl debugfs file, move 'cxl' directory
establishment and teardown to the core and let subsequent init routines
reference that setup.
Ben Widawsky [Wed, 13 Apr 2022 05:18:09 +0000 (22:18 -0700)]
cxl/hdm: Require all decoders to be enumerated
In preparation for region provisioning all device decoders need to be
enumerated since DPA allocations are calculated by summing the
capacities of all decoders in a set. I.e. the programming for decoder[N]
depends on the state of decoder[N-1], so skipping over decoders that
fail to initialize prevents accurate DPA accounting.
Dan Williams [Sat, 21 May 2022 22:35:29 +0000 (15:35 -0700)]
cxl/mem: Convert partition-info to resources
To date the per-device-partition DPA range information has only been
used for enumeration purposes. In preparation for allocating regions
from available DPA capacity, convert those ranges into DPA-type resource
trees.
With resources and the new add_dpa_res() helper some open coded end
address calculations and debug prints can be cleaned.
The 'cxlds->pmem_res' and 'cxlds->ram_res' resources are child resources
of the total-device DPA space and they in turn will host DPA allocations
from cxl_endpoint_decoder instances (tracked by cxled->dpa_res).
Dan Williams [Mon, 23 May 2022 00:04:27 +0000 (17:04 -0700)]
cxl: Introduce cxl_to_{ways,granularity}
Interleave granularity and ways have CXL specification defined encodings.
Promote the conversion helpers to a common header, and use them to
replace other open-coded instances.
Force caller to consider the error case of the conversion similarly to
other conversion helpers like kstrto*().
Dan Williams [Thu, 19 May 2022 04:38:29 +0000 (21:38 -0700)]
cxl/core: Drop is_cxl_decoder()
This helper was only used to identify the object type for lockdep
purposes. Now that lockdep support is done with explicit lock classes,
this helper can be dropped.
Dan Williams [Thu, 19 May 2022 01:02:39 +0000 (18:02 -0700)]
cxl/core: Drop ->platform_res attribute for root decoders
Root decoders are responsible for hosting the available host address
space for endpoints and regions to claim. The tracking of that available
capacity can be done in iomem_resource directly. As a result, root
decoders no longer need to host their own resource tree. The
current ->platform_res attribute was added prematurely.
Otherwise, ->hpa_range fills the role of conveying the current decode
range of the decoder.
Ben Widawsky [Thu, 28 Apr 2022 18:15:40 +0000 (11:15 -0700)]
cxl/hdm: Use local hdm variable
Save a few characters and use the already initialized local variable.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Link: https://lore.kernel.org/r/165603872171.551046.913207574344536475.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 3 Jun 2022 23:43:48 +0000 (16:43 -0700)]
cxl/port: Keep port->uport valid for the entire life of a port
The upcoming region provisioning implementation has a need to
dereference port->uport during the port unregister flow. Specifically,
endpoint decoders need to be able to lookup their corresponding memdev
via port->uport.
The existing ->dead flag was added for cases where the core was
committed to tearing down the port, but needed to drop locks before
calling device_unregister(). Reuse that flag to indicate to
delete_endpoint() that it has no "release action" work to do as
unregister_port() will handle it.
...shows cxl_hdm_decode_init() resulting in a return code ("970997760")
that looks like stack corruption. The problem goes away if
cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init().
The corruption results from the mismatch that the calling convention for
cxl_hdm_decode_init() is:
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
...i.e. an int is expected but __wrap_hdm_decode_init() returns bool.
Fix the convention and cleanup the organization to match
__wrap_cxl_await_media_ready() as the difference was a red herring that
distracted from finding the bug.
Fixes: 92804edb11f0 ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Adam Manzanares <a.manzanares@samsung.com> Link: https://lore.kernel.org/r/165603870776.551046.8709990108936497723.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Vishal Verma [Tue, 28 Jun 2022 22:01:09 +0000 (16:01 -0600)]
cxl/mbox: Fix missing variable payload checks in cmd size validation
The conversion of command sizes to unsigned missed a couple of checks
against variable size payloads during command validation, which made all
variable payload commands unconditionally fail. Add the checks back using
the new CXL_VARIABLE_PAYLOAD scheme.
Fixes: 26f89535a5bb ("cxl/mbox: Use type __u32 for mailbox payload sizes") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Reported-by: Abhi Cs <abhi.cs@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220628220109.633564-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static
inline. 0day reports:
In file included from drivers/cxl/core/port.c:4:
include/linux/memregion.h:19:6: warning: no previous prototype for
function 'memregion_free' [-Wmissing-prototypes]
Alison Schofield [Fri, 25 Feb 2022 22:14:56 +0000 (14:14 -0800)]
cxl/mbox: Use __le32 in get,set_lsa mailbox structures
CXL specification defines these as little endian.
Fixes: 60b8f17215de ("cxl/pmem: Translate NVDIMM label commands to CXL label commands") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/r/20220225221456.1025635-1-alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ben Widawsky [Fri, 4 Mar 2022 21:36:45 +0000 (13:36 -0800)]
cxl/core: Use is_endpoint_decoder
Save some characters and directly check decoder type rather than port
type. There's no need to check if the port is an endpoint port since, by
this point, cxl_endpoint_decoder_alloc() has a specified type.
Reviewed by: Adam Manzanares <a.manzanares@samsung.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
cxl: Fix cleanup of port devices on failure to probe driver.
The device is created, and then there is a check if a driver succesfully
bound to it. In event of failing the bind (e.g. failure in cxl_port_probe())
the device is left registered. When a bus rescan later occurs, fresh
devices are created leading to a multiple device representing the same
underlying hardware. Bad things may follow and at very least we have far too many
devices.
Fix by ensuring autoremove is registered if the device create succeeds,
but doesn't depend on sucessful binding to a driver.
Bug was observed as side effect of incorrect ownership in
[PATCH v9 6/9] cxl/port: Read CDAT table
but will result from any failure to in cxl_port_probe().
Ben Widawsky [Fri, 20 May 2022 18:00:59 +0000 (11:00 -0700)]
MAINTAINERS: Update Ben's email address
I'm leaving Intel. Update email address to korg and add .mailmap
entries. For now, I will be taking a reduced role in CXL development,
but I still plan to spend time working on it, and I can still serve as a
good substitute if needed for maintainer responsibilities (that may
change in the future).
Linus Torvalds [Sun, 19 Jun 2022 14:58:28 +0000 (09:58 -0500)]
Merge tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
Linus Torvalds [Sun, 19 Jun 2022 14:54:16 +0000 (09:54 -0500)]
Merge tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
Linus Torvalds [Sun, 19 Jun 2022 14:51:00 +0000 (09:51 -0500)]
Merge tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix plugging a race between sched_setscheduler()
and balance_push().
sched_setscheduler() spliced the balance callbacks accross a lock
break which makes it possible for an interleaving schedule() to
observe an empty list"
* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix balance_push() vs __sched_setscheduler()
Linus Torvalds [Sun, 19 Jun 2022 14:47:41 +0000 (09:47 -0500)]
Merge tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull lockdep fix from Thomas Gleixner:
"A RT fix for lockdep.
lockdep invokes prandom_u32() to create cookies. This worked until
prandom_u32() was switched to the real random generator, which takes a
spinlock for extraction, which does not work on RT when invoked from
atomic contexts.
lockdep has no requirement for real random numbers and it turns out
sched_clock() is good enough to create the cookie. That works
everywhere and is faster"
* tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Use sched_clock() for random numbers
- Add a missing compatible string to the Uniphier driver"
* tag 'irq-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-liointc: Use architecture register to get coreid
irqchip/uniphier-aidet: Add compatible string for NX1 SoC
dt-bindings: interrupt-controller/uniphier-aidet: Add bindings for NX1 SoC
irqchip/realtek-rtl: Fix refcount leak in map_interrupts
irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions
irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions
irqchip/apple-aic: Fix refcount leak in aic_of_ic_init
irqchip/apple-aic: Fix refcount leak in build_fiq_affinity
irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
irqchip/xilinx: Remove microblaze+zynq dependency
genirq: PM: Use runtime PM for chained interrupts
Linus Torvalds [Sun, 19 Jun 2022 14:37:29 +0000 (09:37 -0500)]
Merge tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes for real from Greg KH:
"Let's tag the proper branch this time...
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
This is what the merge in commit f0ec9c65a8d6 _should_ have merged, but
Greg fat-fingered the pull request and I got some small changes from
linux-next instead there. Credit to Nathan Chancellor for eagle-eyes.
Link: https://lore.kernel.org/all/Yqywy+Md2AfGDu8v@dev-arch.thelio-3990X/
* tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
mei: me: add raptor lake point S DID
mei: hbm: drop capability response on early shutdown
mei: me: set internal pg flag to off on hardware reset
misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw()
comedi: vmk80xx: fix expression for tx buffer size
Linus Torvalds [Sun, 19 Jun 2022 14:35:09 +0000 (09:35 -0500)]
Merge tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS rectifications and a few minor driver fixes"
* tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
i2c: designware: Use standard optional ref clock implementation
MAINTAINERS: core DT include belongs to core
MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
i2c: npcm7xx: Add check for platform_driver_register
MAINTAINERS: Update Synopsys DesignWare I2C to Supported
Linus Torvalds [Sun, 19 Jun 2022 14:24:49 +0000 (09:24 -0500)]
Merge tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There's not a whole lot this time around (I'm still on vacation) but
here are some important fixes for new features merged in -rc1:
- Fix a bug where inode flag changes would accidentally drop nrext64
- Fix a race condition when toggling LARP mode"
* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
xfs: fix variable state usage
xfs: fix TOCTOU race involving the new logged xattrs control knob
Linus Torvalds [Sun, 19 Jun 2022 02:51:12 +0000 (21:51 -0500)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
Linus Torvalds [Sun, 19 Jun 2022 02:44:44 +0000 (21:44 -0500)]
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
Zhang Yi [Wed, 1 Jun 2022 09:27:17 +0000 (17:27 +0800)]
ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ding Xiang [Mon, 30 May 2022 10:00:47 +0000 (18:00 +0800)]
ext4: make variable "count" signed
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Baokun Li [Sat, 28 May 2022 11:00:16 +0000 (19:00 +0800)]
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eric Biggers [Thu, 26 May 2022 04:04:12 +0000 (21:04 -0700)]
ext4: fix up test_dummy_encryption handling for new mount API
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Shyam Prasad N [Tue, 14 Jun 2022 11:47:24 +0000 (11:47 +0000)]
cifs: when a channel is not found for server, log its connection id
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
load_unaligned_zeropad() can lead to unwanted loads across page boundaries.
The unwanted loads are typically harmless. But, they might be made to
totally unrelated or even unmapped memory. load_unaligned_zeropad()
relies on exception fixup (#PF, #GP and now #VE) to recover from these
unwanted loads.
In TDX guests, the second page can be shared page and a VMM may configure
it to trigger #VE.
The kernel assumes that #VE on a shared page is an MMIO access and tries to
decode instruction to handle it. In case of load_unaligned_zeropad() it
may result in confusion as it is not MMIO access.
Fix it by detecting split page MMIO accesses and failing them.
load_unaligned_zeropad() will recover using exception fixups.
The issue was discovered by analysis and reproduced artificially. It was
not triggered during testing.
[ dhansen: fix up changelogs and comments for grammar and clarity,
plus incorporate Kirill's off-by-one fix]
Linus Torvalds [Fri, 17 Jun 2022 20:17:57 +0000 (15:17 -0500)]
Merge tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
* tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add FMODE_CAN_ODIRECT after successful open of a NFS4.x file
sunrpc: set cl_max_connect when cloning an rpc_clnt
pNFS: Avoid a live lock condition in pnfs_update_layout()
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
Linus Torvalds [Fri, 17 Jun 2022 20:12:20 +0000 (15:12 -0500)]
Merge tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert clipping of PCI host bridge windows to avoid E820 regions,
which broke several machines by forcing unnecessary BAR reassignments
(Hans de Goede)"
* tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions"
Linus Torvalds [Fri, 17 Jun 2022 19:57:42 +0000 (14:57 -0500)]
Merge tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
"Make the global console_sem available for CPU that is handling panic()
or shutdown.
This is an old problem when an existing console lock owner might block
console output, but it became more visible with the kthreads"
* tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Wait for the global console lock when the system is going down
printk: Block console kthreads when direct printing will be required
Prior to 4c5e242d3e93 ("x86/PCI: Clip only host bridge windows for E820
regions"), E820 regions did not affect PCI host bridge windows. We only
looked at E820 regions and avoided them when allocating new MMIO space.
If firmware PCI bridge window and BAR assignments used E820 regions, we
left them alone.
After 4c5e242d3e93, we removed E820 regions from the PCI host bridge
windows before looking at BARs, so firmware assignments in E820 regions
looked like errors, and we moved things around to fit in the space left
(if any) after removing the E820 regions. This unnecessary BAR
reassignment broke several machines.
Guilherme reported that Steam Deck fails to boot after 4c5e242d3e93. We
clipped the window that contained most 32-bit BARs:
BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved
acpi PNP0A08:00: clipped [mem 0x80000000-0xf7ffffff window] to [mem 0xa0100000-0xf7ffffff window] for e820 entry [mem 0xa0000000-0xa00fffff]
which forced us to reassign all those BARs, for example, this NVMe BAR:
pci 0000:00:01.2: PCI bridge to [bus 01]
pci 0000:00:01.2: bridge window [mem 0x80600000-0x806fffff]
pci 0000:01:00.0: BAR 0: [mem 0x80600000-0x80603fff 64bit]
pci 0000:00:01.2: can't claim window [mem 0x80600000-0x806fffff]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 0 [mem 0x80600000-0x80603fff 64bit]: no compatible bridge window
All the reassignments were successful, so the devices should have been
functional at the new addresses, but some were not.
Andy reported a similar failure on an Intel MID platform. Benjamin
reported a similar failure on a VMWare Fusion VM.
Note: this is not a clean revert; this revert keeps the later change to
make the clipping dependent on a new pci_use_e820 bool, moving the checking
of this bool to arch_remove_reservations().
[bhelgaas: commit log, add more reporters and testers] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216109 Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reported-by: Benjamin Coddington <bcodding@redhat.com> Reported-by: Jongman Heo <jongman.heo@gmail.com> Fixes: 4c5e242d3e93 ("x86/PCI: Clip only host bridge windows for E820 regions") Link: https://lore.kernel.org/r/20220612144325.85366-1-hdegoede@redhat.com Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Linus Torvalds [Fri, 17 Jun 2022 18:55:19 +0000 (13:55 -0500)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Revert the moving of the jump labels initialisation before
setup_machine_fdt(). The bug was fixed in drivers/char/random.c.
- Ftrace fixes: branch range check and consistent handling of PLTs.
- Clean rather than invalidate FROM_DEVICE buffers at start of DMA
transfer (safer if such buffer is mapped in user space). A cache
invalidation is done already at the end of the transfer.
- A couple of clean-ups (unexport symbol, remove unused label).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer
arm64/cpufeature: Unexport set_cpu_feature()
arm64: ftrace: remove redundant label
arm64: ftrace: consistently handle PLTs.
arm64: ftrace: fix branch range checks
Revert "arm64: Initialize jump labels before setup_machine_fdt()"
Linus Torvalds [Fri, 17 Jun 2022 18:50:24 +0000 (13:50 -0500)]
Merge tag 'loongarch-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Add missing ELF_DETAILS in vmlinux.lds.S and fix document rendering"
* tag 'loongarch-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Fix notes rendering by using reST directives
docs/LoongArch: Fix notes rendering by using reST directives
LoongArch: vmlinux.lds.S: Add missing ELF_DETAILS
Linus Torvalds [Fri, 17 Jun 2022 18:45:47 +0000 (13:45 -0500)]
Merge tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the PolarFire SOC's device tree
- A handful of fixes for the recently added Svpmbt support
- An improvement to the Kconfig text for Svpbmt
* tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
riscv: dts: microchip: re-add pdma to mpfs device tree
* tag 'hyperv-fixes-signed-20220617' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM
Drivers: hv: vmbus: Release cpu lock in error case
HID: hyperv: Correctly access fields declared as __le16
clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()
Drivers: hv: Fix syntax errors in comments
Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUs
Linus Torvalds [Fri, 17 Jun 2022 18:22:58 +0000 (11:22 -0700)]
Merge tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- Quirks, quirks, quirks to work around buggy consumer grade
devices (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
- Better kernel messages for devices that need quirking (Keith
Bush)
- Make a kernel message more useful (Thomas Weißschuh)
- MD pull request from Song, with a few fixes
- blk-mq sysfs locking fixes (Ming)
- BFQ stats fix (Bart)
- blk-mq offline queue fix (Bart)
- blk-mq flush request tag fix (Ming)
* tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block:
block/bfq: Enable I/O statistics
blk-mq: don't clear flush_rq from tags->rqs[]
blk-mq: avoid to touch q->elevator without any protection
blk-mq: protect q->elevator by ->sysfs_lock in blk_mq_elv_switch_none
block: Fix handling of offline queues in blk_mq_alloc_request_hctx()
md/raid5-ppl: Fix argument order in bio_alloc_bioset()
Revert "md: don't unregister sync_thread with reconfig_mutex held"
nvme-pci: disable write zeros support on UMIC and Samsung SSDs
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
nvme-pci: sk hynix p31 has bogus namespace ids
nvme-pci: smi has bogus namespace ids
nvme-pci: phison e12 has bogus namespace ids
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
nvme-pci: add trouble shooting steps for timeouts
nvme: add bug report info for global duplicate id
nvme: add device name to warning in uuid_show()
Linus Torvalds [Fri, 17 Jun 2022 18:14:07 +0000 (11:14 -0700)]
Merge tag 'io_uring-5.19-2022-06-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Bigger than usual at this time, both because we missed -rc2, but also
because of some reverts that we chose to do. In detail:
- Adjust mapped buffer API while we still can (Dylan)
- Mapped buffer fixes (Dylan, Hao, Pavel, me)
- Fix for uring_cmd wrong API usage for task_work (Dylan)
- Fix for bug introduced in fixed file closing (Hao)
- Fix race in buffer/file resource handling (Pavel)
- Revert the NOP support for CQE32 and buffer selection that was
brought up during the merge window (Pavel)
- Remove IORING_CLOSE_FD_AND_FILE_SLOT introduced in this merge
window. The API needs further refining, so just yank it for now and
we'll revisit for a later kernel.
- Series cleaning up the CQE32 support added in this merge window,
making it more integrated rather than sitting on the side (Pavel)"
* tag 'io_uring-5.19-2022-06-16' of git://git.kernel.dk/linux-block: (21 commits)
io_uring: recycle provided buffer if we punt to io-wq
io_uring: do not use prio task_work_add in uring_cmd
io_uring: commit non-pollable provided mapped buffers upfront
io_uring: make io_fill_cqe_aux honour CQE32
io_uring: remove __io_fill_cqe() helper
io_uring: fix ->extra{1,2} misuse
io_uring: fill extra big cqe fields from req
io_uring: unite fill_cqe and the 32B version
io_uring: get rid of __io_fill_cqe{32}_req()
io_uring: remove IORING_CLOSE_FD_AND_FILE_SLOT
Revert "io_uring: add buffer selection support to IORING_OP_NOP"
Revert "io_uring: support CQE32 for nop operation"
io_uring: limit size of provided buffer ring
io_uring: fix types in provided buffer ring
io_uring: fix index calculation
io_uring: fix double unlock for pbuf select
io_uring: kbuf: fix bug of not consuming ring buffer in partial io case
io_uring: openclose: fix bug of closing wrong fixed file
io_uring: fix not locked access to fixed buf table
io_uring: fix races with buffer table unregister
...
Will Deacon [Fri, 10 Jun 2022 15:12:27 +0000 (16:12 +0100)]
arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer
Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers
When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:
(1) If the DMA transfer does not write to every byte in the buffer,
then the unwritten bytes will contain stale data once the transfer
has completed.
(2) If the buffer has a virtual alias in userspace, then stale data
may be visible via this alias during the period between performing
the cache invalidation and the DMA writes landing in memory.
Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.
Linus Torvalds [Fri, 17 Jun 2022 17:09:24 +0000 (10:09 -0700)]
Merge tag 'fs_for_v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback and ext2 fixes from Jan Kara:
"A fix for writeback bug which prevented machines with kdevtmpfs from
booting and also one small ext2 bugfix in IO error handling"
* tag 'fs_for_v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
init: Initialize noop_backing_dev_info early
ext2: fix fs corruption when trying to remove a non-empty directory with IO error
Linus Torvalds [Fri, 17 Jun 2022 17:03:53 +0000 (10:03 -0700)]
Merge tag 'for-5.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix a race in DM core's dm_start_io_acct that could result in double
accounting for abnormal IO (e.g. discards, write zeroes, etc).
- Fix a use-after-free in DM core's dm_put_live_table_bio.
- Fix a race for REQ_NOWAIT bios being issued despite no support from
underlying DM targets (due to DM table reload at an "unlucky" time)
- Fix access beyond allocated bitmap in DM mirror's log.
* tag 'for-5.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mirror log: round up region bitmap size to BITS_PER_LONG
dm: fix narrow race for REQ_NOWAIT bios being issued despite no support
dm: fix use-after-free in dm_put_live_table_bio
dm: fix race in dm_start_io_acct
Linus Torvalds [Fri, 17 Jun 2022 17:02:26 +0000 (10:02 -0700)]
Merge tag 'hwmon-for-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing lock protection in occ driver
- Add missing comma in board name list in asus-ec-sensors driver
- Fix devicetree bindings for ti,tmp401
* tag 'hwmon-for-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) add missing comma in board name list.
hwmon: (occ) Lock mutex in shutdown to prevent race with occ_active
dt-bindings: hwmon: ti,tmp401: Drop 'items' from 'ti,n-factor' property
Linus Torvalds [Fri, 17 Jun 2022 14:58:39 +0000 (07:58 -0700)]
Merge tag 'char-misc-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
eeprom: at25: Split reads into chunks and cap write size
misc: atmel-ssc: Fix IRQ check in ssc_probe
char: lp: remove redundant initialization of err
Linus Torvalds [Fri, 17 Jun 2022 14:55:24 +0000 (07:55 -0700)]
Merge tag 'staging-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.19-rc3 that resolve
reported issues:
- remove visorbus.h which was forgotten in the -rc1 merge where the
code that used it was removed
- olpc_dcon: mark as broken to allow the DRM developers to evolve the
fbdev api properly without having to deal with this obsolete
driver. It will be removed soon if no one steps up to adopt it and
fix the issues with it.
- rtl8723bs driver fix
- r8188eu driver fix to resolve many reports of the driver being
broken with -rc1.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: Also remove the Unisys visorbus.h
staging: rtl8723bs: Allocate full pwep structure
staging: olpc_dcon: mark driver as broken
staging: r8188eu: Fix warning of array overflow in ioctl_linux.c
staging: r8188eu: fix rtw_alloc_hwxmits error detection for now
Linus Torvalds [Fri, 17 Jun 2022 14:52:43 +0000 (07:52 -0700)]
Merge tag 'tty-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.19-rc3 to
resolve some reported problems:
- 8250 lsr read bugfix
- n_gsm line discipline allocation fix
- qcom serial driver fix for reported lockups that happened in -rc1
- goldfish tty driver fix
All have been in linux-next for a while now with no reported issues"
* tag 'tty-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Store to lsr_save_flags after lsr read
tty: goldfish: Fix free_irq() on remove
tty: serial: qcom-geni-serial: Implement start_rx callback
serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.
tty: n_gsm: Debug output allocation must use GFP_ATOMIC
Linus Torvalds [Fri, 17 Jun 2022 14:50:41 +0000 (07:50 -0700)]
Merge tag 'usb-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc3
They include:
- new usb-serial driver device ids
- usb gadget driver fixes for reported problems
- cdnsp driver fix
- dwc3 driver fixes for reported problems
- dwc3 driver fix for merge problem that I caused in 5.18
- xhci driver fixes
- dwc2 memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_fs: change ep->ep safe in ffs_epfile_io()
usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()
xhci: Fix null pointer dereference in resume if xhci has only one roothub
USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
usb: cdnsp: Fixed setting last_trb incorrectly
usb: gadget: u_ether: fix regression in setting fixed MAC address
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
usb: dwc2: Fix memory leak in dwc2_hcd_init
usb: dwc3: pci: Restore line lost in merge conflict resolution
usb: dwc3: gadget: Fix IN endpoint max packet size allocation
USB: serial: option: add support for Cinterion MV31 with new baseline
USB: serial: io_ti: add Agilent E5805A support
Youling Tang [Mon, 13 Jun 2022 10:54:12 +0000 (18:54 +0800)]
LoongArch: vmlinux.lds.S: Add missing ELF_DETAILS
Commit c604abc3f6e ("vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG")
splits ELF_DETAILS from STABS_DEBUG, resulting in missing ELF_DETAILS
information in LoongArch architecture, so add it.
Jens Axboe [Fri, 17 Jun 2022 12:24:26 +0000 (06:24 -0600)]
io_uring: recycle provided buffer if we punt to io-wq
io_arm_poll_handler() will recycle the buffer appropriately if we end
up arming poll (or if we're ready to retry), but not for the io-wq case
if we have attempted poll first.
Explicitly recycle the buffer to avoid both hanging on to it too long,
but also to avoid multiple reads grabbing the same one. This can happen
for ring mapped buffers, since it hasn't necessarily been committed.
Linus Torvalds [Fri, 17 Jun 2022 04:39:51 +0000 (21:39 -0700)]
Merge tag 'drm-fixes-2022-06-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular drm fixes for rc3. Nothing too serious, i915, amdgpu and
exynos all have a few small driver fixes, and two ttm fixes, and one
compiler warning.
i915:
- Fix page fault on error state read
- Fix memory leaks in per-gt sysfs
- Fix multiple fence handling
- Remove accidental static from a local variable
exynos:
- Check a null pointer instead of IS_ERR()
- Rework initialization code of Exynos MIC driver"
* tag 'drm-fixes-2022-06-17' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Cap OLED brightness per max frame-average luminance
drm/amdgpu: Fix GTT size reporting in amdgpu_ioctl
drm/exynos: mic: Rework initialization
drm/exynos: fix IS_ERR() vs NULL check in probe
drm/ttm: fix bulk move handling v2
drm/i915/uc: remove accidental static from a local variable
drm/i915: Individualize fences before adding to dma_resv obj
drm/i915/gt: Fix memory leaks in per-gt sysfs
drm/i915/reset: Fix error_state_read ptr + offset use
drm/ttm: fix missing NULL check in ttm_device_swapout
drm/atomic: fix warning of unused variable
Dave Airlie [Fri, 17 Jun 2022 00:24:42 +0000 (10:24 +1000)]
Merge tag 'drm-intel-fixes-2022-06-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.19-rc3:
- Fix page fault on error state read
- Fix memory leaks in per-gt sysfs
- Fix multiple fence handling
- Remove accidental static from a local variable
Mikulas Patocka [Thu, 16 Jun 2022 17:28:57 +0000 (13:28 -0400)]
dm mirror log: round up region bitmap size to BITS_PER_LONG
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Mikulas Patocka [Thu, 16 Jun 2022 18:14:39 +0000 (14:14 -0400)]
dm: fix narrow race for REQ_NOWAIT bios being issued despite no support
Starting with the commit 63a225c9fd20, device mapper has an optimization
that it will take cheaper table lock (dm_get_live_table_fast instead of
dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT
must not block in the target request routine, if they did, we would be
blocking while holding rcu_read_lock, which is prohibited.
The targets that are suitable for REQ_NOWAIT optimization (and that don't
block in the map routine) have the flag DM_TARGET_NOWAIT set. Device
mapper will test if all the targets and all the devices in a table
support nowait (see the function dm_table_supports_nowait) and it will set
or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to
this check.
There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) &&
!blk_queue_nowait(q)) goto not_supported" - this will make sure that
REQ_NOWAIT bios can't enter a request queue that doesn't support them.
This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets
that don't support the REQ_NOWAIT flag (and that may block in the map
routine) - except that there is a small race condition:
submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without
holding any locks. Immediatelly after this check, the device mapper table
may be reloaded with a table that doesn't support REQ_NOWAIT (for example,
if we start moving the logical volume or if we activate a snapshot).
However the REQ_NOWAIT bio that already passed the check in
submit_bio_noacct would be sent to device mapper, where it could be
redirected to a dm target that doesn't support REQ_NOWAIT - the result is
sleeping while we hold rcu_read_lock.
In order to fix this race, we double-check if the target supports
REQ_NOWAIT while we hold the table lock (so that the table can't change
under us).
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Mikulas Patocka [Thu, 16 Jun 2022 17:21:27 +0000 (13:21 -0400)]
dm: fix use-after-free in dm_put_live_table_bio
dm_put_live_table_bio is called from the end of dm_submit_bio.
However, at this point, the bio may be already finished and the caller
may have freed the bio. Consequently, dm_put_live_table_bio accesses
the stale "bio" pointer.
Fix this bug by loading the bi_opf value and passing it to
dm_get_live_table_bio and dm_put_live_table_bio instead of the bio.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Dave Airlie [Thu, 16 Jun 2022 23:31:22 +0000 (09:31 +1000)]
Merge tag 'drm-misc-fixes-2022-06-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two fixes for TTM, one for a NULL pointer dereference and one to make sure
the buffer is pinned prior to a bulk move, and a fix for a spurious
compiler warning.
Steve French [Thu, 16 Jun 2022 03:40:23 +0000 (22:40 -0500)]
smb3: add trace point for SMB2_set_eof
In order to debug problems with file size being reported incorrectly
temporarily (in this case xfstest generic/584 intermittent failure)
we need to add trace point for the non-compounded code path where
we set the file size (SMB2_set_eof). The new trace point is:
"smb3_set_eof"
Bart Van Assche [Mon, 13 Jun 2022 16:32:34 +0000 (09:32 -0700)]
block/bfq: Enable I/O statistics
BFQ uses io_start_time_ns. That member variable is only set if I/O
statistics are enabled. Hence this patch that enables I/O statistics
at the time BFQ is associated with a request queue.
Compile-tested only.
Reported-by: Cixi Geng <cixi.geng1@unisoc.com> Cc: Cixi Geng <cixi.geng1@unisoc.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Paolo Valente <paolo.valente@unimore.it> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 16 Jun 2022 22:53:38 +0000 (15:53 -0700)]
Merge tag 'audit-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where we were not properly
freeing memory allocated when recording information related to a
module load"
* tag 'audit-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: free module name
Linus Torvalds [Thu, 16 Jun 2022 22:50:36 +0000 (15:50 -0700)]
Merge tag 'selinux-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to fix memory leaks when mounting filesystems
with SELinux mount options"
* tag 'selinux-pr-20220616' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: free contexts previously transferred in selinux_add_opt()
projects / thirdparty / linux.git / log
