Chancel Liu [Mon, 28 Nov 2022 06:09:50 +0000 (14:09 +0800)]
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
DAIs parameters should be cleared if there's no active stream. Before,
we implemented it in soc_pcm_hw_free() by detecting stream_active. If
the running stream is the last active stream, we're going to clear
parameters.
However it will cause DAIs parameters never be cleared if there're
more than one stream. For example, we have stream1 and stream2 about
to stop. stream2 executes soc_pcm_hw_free() before stream1 executes
soc_pcm_close(). At the moment, stream2 should clear DAIs parameters.
Since stream_active is not yet updated by stream1 in soc_pcm_close(),
stream2 will not clear DAIs parameters. In result both stream1 and
stream2 don't clear the parameters.
This patch moves DAIs parameters cleanup after stream_active is
updated.
Mark Brown [Wed, 7 Dec 2022 17:24:46 +0000 (17:24 +0000)]
ASoC: Intel: Skylake: Topology and shutdown fixes
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Even though skylake-driver is going to be replaced by the avs-driver,
the goal is to keep it functional on all the configurations it supports
until its EOL. When comparing chrome trees against upstream
skylake-driver, couple fixes pop up that are not part of upstream
repository. These fixes are backed up by real bugs (issue trackers),
address real problems. There is no reason for them to stay in the
internal tree.
Patches 1-4 combined together address issue where the driver updates the
presumably static audio format descriptions coming from the topology
files through its "fixup" functions. As long as given audio format is
used by a single path, nothing collides and any updates are harmless.
However, when multiple paths e.g.: DMIC and HDMI1 utilize the same audio
format descriptor, any updates caused by the opening of the first path,
may cause the second to fail.
The 5th change from the set fixes driver hang sporadically occurring
during shutdown procedure. Once HDAudio links are powered down along
with the AudioDSP, the hang stops reproducing.
The last change helps survive in environments with limited/fragmented
memory. While the BDL is small already, other buffers can be allocated
using scatter-gather. This basically aligns the code with what the
avs-driver does.
Wang Yufen [Mon, 5 Dec 2022 09:56:28 +0000 (17:56 +0800)]
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe().
ye xingchen [Mon, 5 Dec 2022 11:43:47 +0000 (19:43 +0800)]
ASoC: imx-audmux: use sysfs_emit() to instead of scnprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Wang Yufen [Mon, 5 Dec 2022 08:15:27 +0000 (16:15 +0800)]
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
The of_get_next_child() returns a node with refcount incremented, and
decrements the refcount of prev. So in the error path of the while loop,
of_node_put() needs be called for cpu_ep.
Fixes: fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
Wang Yufen [Mon, 5 Dec 2022 10:04:24 +0000 (18:04 +0800)]
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8173_rt5650_rt5514_dev_probe().
Cezary Rojewski [Mon, 5 Dec 2022 08:53:30 +0000 (09:53 +0100)]
ASoC: Intel: Skylake: Use SG allocation for SKL-based firmware load
Resign from ->alloc_dma_buf() and use snd_dma_alloc_pages() directly.
For data i.e.: base firmware binary transfer, make use of SG allocation
to better adapt to memory-limited environment. For BDL descriptor, given
its small size this is not required.
Cezary Rojewski [Mon, 5 Dec 2022 08:53:28 +0000 (09:53 +0100)]
ASoC: Intel: Skylake: Introduce single place for pipe-config selection
Provide a single location for pipe config selection where all fields
that have to be updated whenever ->pipe_config_idx changes can be
updated accordingly.
Mark Brown [Mon, 5 Dec 2022 19:01:57 +0000 (19:01 +0000)]
ASoC: Intel: avs: Data probing and fw logging
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset focuses on debug functionality for the avs-driver.
Two major blocks are covered here: data probing and AudioDSP firmware
logging. Both are configured and controlled through debugfs.
Data probing is a AudioDSP debug functionality which allows for
gathering the actual data that is being routed to or from a module.
Helps in debugging its processing capabilities - navigate to a specific
module which may have caused a glitch within a pipeline (set of modules
bound together).
First few allow for assigning compress stream to a HDAudio stream, what
is currently limited to pcm substreams only. These patches were already
present on this list and reviewed in the past [1].
The next few tidy existing debug-related code up so it's ready for
addition of new functionalities and make it clear which part of the avs
is debug related and which is not. These also simplify the existing
locking around the trace fifo.
Afterward, debug-related IPCs are defined along with stub soc-component
and compress DAI operations. Not much is done there as it's not a
standard PCM streaming scenario. Most code found in compress operations
is inherited from the HOST side of HDAudio streaming found in pcm.c
file of the driver.
Finally, a debugfs file operations are defined. These facilitate
connecting to DSP modules from which the data shall be gathered as well
as control and configuration of firmware logging. Additionally, entries
are added to allow for dumping snapshots of key memory windows.
Yang Yingliang [Mon, 5 Dec 2022 14:37:21 +0000 (22:37 +0800)]
ASoC: sof_es8336: fix possible use-after-free in sof_es8336_remove()
sof_es8336_remove() calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This
means that the callback function may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Fixes: 89cdb224f2ab ("ASoC: sof_es8336: reduce pop noise on speaker") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221205143721.3988988-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: maxim,max98504: Convert to DT schema
Convert the Maxim Integrated MAX98504 amplifier bindings to DT schema.
Few properties are made optional:
1. interrupts: current Linux driver implementation does not use them,
2. supplies: on some boards these might be wired to battery, for which
no regulator is provided.
ASoC: dt-bindings: maxim,max98357a: Convert to DT schema
Convert the Maxim Integrated MAX98357A/MAX98360A amplifier bindings to
DT schema. Add missing properties ('#sound-dai-cells' and
'sound-name-prefix' from common DAI properties).
ASoC: dt-bindings: Reference common DAI properties
Reference in all sound components which have '#sound-dai-cells' the
dai-common.yaml schema, which allows to use 'sound-name-prefix'
property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Acked-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20221203160442.69594-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: Extend name-prefix.yaml into common DAI properties
Rename name-prefix.yaml into common DAI schema and document
'#sound-dai-cells' for completeness. The '#sound-dai-cells' cannot be
really constrained, as there are users with value of 0, 1 and 2, but at
least it brings definition to one common place.
Colin Ian King [Fri, 2 Dec 2022 17:14:50 +0000 (17:14 +0000)]
ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
Don't populate the read-only arrays capture_reg_H and capture_reg_L
on the stack but instead make them static const. Also makes the
object code a little smaller.
Colin Ian King [Fri, 2 Dec 2022 16:41:56 +0000 (16:41 +0000)]
ASoC: uniphier: aio-core: Make some read-only arrays static const
Don't populate the read-only arrays slotsel_2ch, slotsel_multi, v_pll
and v_div on the stack but instead make them static const. Also makes
the object code a little smaller.
Ajye Huang [Mon, 5 Dec 2022 12:06:48 +0000 (17:36 +0530)]
ASoC: SOF: amd: Use poll function instead to read ACP_SHA_DSP_FW_QUALIFIER
The Skyrim project and Whiterun met error when DSP
loading during device boot.
Ex, error in kernel log,
ERR kernel: [ 16.124537] snd_sof_amd_rembrandt
0000:04:00.5: PSP validation failed.
Use the snd_sof_dsp_read_poll_timeout function to successfully
read the FW_QUALIFIER register
Cezary Rojewski [Fri, 2 Dec 2022 15:28:40 +0000 (16:28 +0100)]
ASoC: Intel: avs: Allow for dumping FW_REGS area
SRAM0 window begins with a block of memory, usually of size PAGE_SIZE,
dedicated to the base firmware registers. When debugging firmware, it is
desirable to be able to dump them at will.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:39 +0000 (16:28 +0100)]
ASoC: Intel: avs: Gather remaining logs on strace_release()
When user closes the tracer, some logs may still remain in the tail of
the buffer as firmware sends LOG_BUFFER_STATUS notification only when
certain threshold of data is reached. Add whatever is left to already
gathered logs so no information is lost.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:38 +0000 (16:28 +0100)]
ASoC: Intel: avs: Probing and firmware tracing over debugfs
Define debugfs subdirectory delegated for IPC communication with DSP.
Input format: uint,uint,(...) which are later translated into DWORDS
sequence and further into instances of struct of interest given the IPC
type.
For Extractor probes, following have been enabled:
- PROBE_POINT_ADD (echo <..> probe_points)
- PROBE_POINT_REMOVE (echo <..> probe_points_remove)
- PROBE_POINT_INFO (cat probe_points)
Cezary Rojewski [Fri, 2 Dec 2022 15:28:36 +0000 (16:28 +0100)]
ASoC: Intel: avs: Data probing soc-component
Define stub component for data probing. Stub as most operations from
standard PCM case do not apply here. Specific bits are CPU DAIs and
compress_ops. FE DAIs can link against these new CPU DAI to create new
compress devices.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:35 +0000 (16:28 +0100)]
ASoC: Intel: avs: Probe compress operations
Add compress operations handlers for data extraction through probes. A
single HDAudio stream is enlisted for said purpose. Operations follow
same protocol as for standard PCM streaming on HOST side.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:34 +0000 (16:28 +0100)]
ASoC: Intel: avs: Add data probing requests
Data probing is a cAVS firmware functionality that allows for data
extraction and injection directly from or to DMA stream. To support it,
new functions and types are added. These facilitate communication
with the firmware.
Total of eight IPCs:
- probe module initialization and cleanup
- addition and removal of probe points
- addition and removal of injection DMAs
- dumping list of currently connected probe points or enlisted DMAs
Cezary Rojewski [Fri, 2 Dec 2022 15:28:33 +0000 (16:28 +0100)]
ASoC: Intel: avs: Drop usage of debug members in non-debug code
Switch to debug-context aware wrappers instead of accessing debug
members directly allowing for readable separation of debug and non-debug
related code. Duplicates are removed along the way.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:32 +0000 (16:28 +0100)]
ASoC: Intel: avs: Make enable_logs() dependent on DEBUG_FS
Without debug filesystem present, this code is redundant.
Operations: log_buffer_status and log_buffer_offset are left as is as
EXCEPTION_CAUGHT and even unexpected LOG_BUFFER_STATUS notifications may
occur without user ever touching debugfs.
Debug-related fields and log-dumping are useful when debugfs is enabled.
Define them under CONFIG_DEBUG_FS and provide stubs when the config is
disabled so that the code that makes use of these needs not to be
complicated unnecessarily.
Members that are duplicated by this patch will be removed by the follow
up changes.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:28 +0000 (16:28 +0100)]
ALSA: hda: Interrupt servicing and BDL setup for compress streams
Account for compress streams when receiving and servicing buffer
completed interrupts. In case of compress stream enlisting hdac_stream
for data transfer, setup BDL entries much like it is the case for PCM
streams.
Cezary Rojewski [Fri, 2 Dec 2022 15:28:26 +0000 (16:28 +0100)]
ALSA: hda: Allow for compress stream to hdac_ext_stream assignment
Currently only PCM streams can enlist hdac_stream for their data
transfer. Add cstream field to hdac_ext_stream to expose possibility of
compress stream assignment in place of PCM one.
Limited to HOST-type only as there no other users on the horizon.
Mark Brown [Sun, 4 Dec 2022 17:01:50 +0000 (17:01 +0000)]
ASoC/tda998x: Fix reporting of nonexistent capture streams
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
Mark Brown [Wed, 30 Nov 2022 18:46:43 +0000 (18:46 +0000)]
ASoC: hdmi-codec: Allow playback and capture to be disabled
Currently the hdmi-codec driver always registers both playback and capture
capabilities but for most systems there's no actual capture capability,
usually HDMI is transmit only. Provide platform data which allows the users
to indicate what is supported so that we don't end up advertising things
to userspace that we can't actually support.
In order to avoid breaking existing users the flags in platform data are
a bit awkward and specify what should be disabled rather than doing the
perhaps more expected thing and defaulting to not supporting capture.
David Rau [Mon, 21 Nov 2022 05:07:44 +0000 (05:07 +0000)]
ASoC: da7219: Fix pole orientation detection on OMTP headsets when playing music
The OMTP pin define headsets can be mis-detected as line out
instead of OMTP, causing obvious issues with audio quality.
This patch is to put increased resistances within
the device at a suitable point.
To solve this issue better, the new mechanism setup
ground switches with conditional delay control
and these allow for more stabile detection process
to operate as intended. This conditional delay control
will not impact the hardware process
but use extra system resource.
This commit improves control of ground switches in the AAD logic.
Artem Lukyanov [Wed, 30 Nov 2022 08:52:47 +0000 (11:52 +0300)]
ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022 into DMI table
This model requires an additional detection quirk to enable the
internal microphone - BIOS doesn't seem to support AcpDmicConnected
(nothing in acpidump output).
Mark Brown [Tue, 29 Nov 2022 19:29:05 +0000 (19:29 +0000)]
ASoC: Intel: avs: rt5682: Refactor jack handling
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Leftover from recent series [1].
Following changes are proposed for the rt5682 sound card driver:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Mark Brown [Tue, 29 Nov 2022 16:56:44 +0000 (16:56 +0000)]
ASoC: Intel: avs: Refactor jack handling
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
For all the boards included in this patchset, a similar set of changes
is proposed:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
While bdw_rt286 board - which is utilized by the catpt-driver - is
definitely not part of "avs", same treatment applies. And thus decided
to make it part of this series instead of sending it separately.
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Cezary Rojewski [Fri, 25 Nov 2022 18:40:22 +0000 (19:40 +0100)]
ASoC: Intel: bdw_rt286: Refactor jack handling
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
ASoC: qcom: lpass-sc7180: Delete redundant error log from _resume()
sc7180_lpass_dev_resume() logs an error if clk_bulk_prepare_enable()
fails. The clock framework already generates error logs if anything
goes wrong, so the logging in _resume() is redundant, drop it.
ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops
Update lpass sc7280 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Mark Brown [Mon, 28 Nov 2022 16:38:18 +0000 (16:38 +0000)]
ASoC: dt-bindings: Rework Qualcomm APR/GPR Sound nodes for SM8450
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Adding sound support for Qualcomm SM8450 SoC (and later for SC8280XP) brought
some changes to APR/GPR services bindings. These bindings are part of
qcom,apr.yaml:
The schema for services (apr-gpr-service@[0-9]) was not complete and is still
quite not specific. It allows several incorrect combinations, like adding a
clock-controller to a APM device. Restricting it would complicate the schema
even more. Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC
would grow it as well.
Refactor the bindings before extending them for Qualcomm SM8450 SoC.
ASoC: qcom: lpass-sc7180: Add system suspend/resume PM ops
Update lpass sc7180 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Oder Chiou [Mon, 28 Nov 2022 07:08:25 +0000 (15:08 +0800)]
ASoC: rt5640: Fix Jack work after system suspend
We found an corner case in RT5640 codec driver which schedules jack work
after system suspend as IRQ was enabled. Due to this, hitting the error
as register access happening after suspend as jack worker thread getting
scheduled in irq handler. The patch disables the irq during the suspend
to prevent the corner case happening.
Jean Delvare [Sun, 27 Nov 2022 18:35:49 +0000 (19:35 +0100)]
ASoC: SOF: Drop obsolete dependency on COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Pavel Dobias [Wed, 23 Nov 2022 15:38:18 +0000 (16:38 +0100)]
ASoC: max9867: Implement exact integer mode
For 8kHz and 16kHz sample rates and certain PCLK values
the codec can be programmed to operate in exact integer
mode. If available, use it to achieve the exact sample rate.
ASoC: rsnd: adg: use __clk_get_name() instead of local clk_name[]
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating
clk name, but we don't want to use local clk_name[] everywhere when we
support R-Car Gen4 sound to handling non compatible clk naming.
This patch uses __clk_get_name() instead of local clk_name[] for it.
Charles Keepax [Wed, 23 Nov 2022 16:54:32 +0000 (16:54 +0000)]
ASoC: sdw-mockup: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:31 +0000 (16:54 +0000)]
ASoC: rt715: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:30 +0000 (16:54 +0000)]
ASoC: rt711: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:29 +0000 (16:54 +0000)]
ASoC: rt700: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:28 +0000 (16:54 +0000)]
ASoC: rt5682-sdw: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:27 +0000 (16:54 +0000)]
ASoC: rt1316-sdw: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:26 +0000 (16:54 +0000)]
ASoC: rt1308-sdw: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:25 +0000 (16:54 +0000)]
ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helper
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Charles Keepax [Wed, 23 Nov 2022 16:54:24 +0000 (16:54 +0000)]
sound: sdw: Add hw_params to SoundWire config helper function
The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Jean Delvare [Sun, 27 Nov 2022 18:34:41 +0000 (19:34 +0100)]
ASoC: rsnd: Drop obsolete dependency on COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
ASoC: SOF: amd: Fix for selecting clock source as external clock.
By default clock source is selected as internal clock of 96Mhz
which is not configurable. Now we select the clock source to
external clock (ACLK) which can be configurable to different clock
ranges depending on usecase.
ASoC: SOF: amd: Fix for reading position updates from stream box.
By default the position updates are read from dsp box when streambox
size is not defined.if the streambox size is defined to some value
then position updates can be read from the streambox.
On SM8450 and SC8280XP, the Q6APM is a bit different:
1. It is used as a platform DAI link, so it needs #sound-dai-cells.
2. It has two DAI children, so add new "bedais" node.
ASoC: dt-bindings: qcom,q6apm-lpass-dais: Split to separate schema
The Qualcomm DSP LPASS Audio DAIs are a bit different than Qualcomm DSP
Audio FrontEnd (Q6AFE) DAIs - they do not use children nodes for each
DAI. None of other properties from qcom,q6dsp-lpass-ports.yaml apply
here as well, so move the qcom,q6apm-lpass-dais compatible to its own
binding.
ASoC: dt-bindings: qcom,q6core: Split to separate schema
The APR/GPR bindings with services got complicated so move out the
Q6Core service to its own binding. Previously the compatible was
documented in qcom,apr.yaml.
ASoC: dt-bindings: qcom,q6prm: Split to separate schema
The APR/GPR bindings with services got complicated so move out the Q6PRM
service to its own binding. Previously the compatible was documented in
qcom,apr.yaml.
ASoC: dt-bindings: qcom,q6asm: Split to separate schema
The APR/GPR bindings with services got complicated so move out the Q6ASM
service to its own binding. Previously the compatible was documented in
qcom,apr.yaml. Move most of the examples from its children to this new
file.
ASoC: dt-bindings: qcom,q6adm: Split to separate schema
The APR/GPR bindings with services got complicated so move out the Q6ADM
service to its own binding. Previously the compatible was documented in
qcom,apr.yaml. Move most of the examples from its children to this new
file.
ASoC: dt-bindings: qcom,q6apm: Split to separate schema
The APR/GPR bindings with services got complicated so move out the Q6APM
service to its own binding. Previously the compatible was documented in
qcom,apr.yaml. Move most of the examples from its children to this new
file.
projects / thirdparty / kernel / linux.git / log
