Hoku Ishibe [Mon, 24 Feb 2025 02:05:17 +0000 (21:05 -0500)]
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences
persistent humming noise when the power_save mode is enabled.
This issue occurs when the codec enters power saving mode,
leading to unwanted noise from the speakers.
This patch adds the affected model (PCI ID 0x1028:0x0962) to the
power_save denylist to ensure power_save is disabled by default,
preventing power-off related noise issues.
Steps to Reproduce
1. Boot the system with `snd_hda_intel` loaded.
2. Verify that `power_save` mode is enabled:
```sh
cat /sys/module/snd_hda_intel/parameters/power_save
````
output: 10 (default power save timeout)
3. Wait for the power save timeout
4. Observe a persistent humming noise from the speakers
5. Disable `power_save` manually:
```sh
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save
````
6. Confirm that the noise disappears immediately.
This issue has been observed on my system, and this patch
successfully eliminates the unwanted noise. If other users
experience similar issues, additional reports would be helpful.
The alternative path leads to a build error after a recent change:
sound/pci/hda/patch_realtek.c: In function 'alc233_fixup_lenovo_low_en_micmute_led':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
sound/pci/hda/patch_realtek.c:5041:49: note: in expansion of macro 'NULL'
5041 | #define alc233_fixup_lenovo_line2_mic_hotkey NULL
| ^~~~
sound/pci/hda/patch_realtek.c:5063:9: note: in expansion of macro 'alc233_fixup_lenovo_line2_mic_hotkey'
5063 | alc233_fixup_lenovo_line2_mic_hotkey(codec, fix, action);
Using IS_REACHABLE() is somewhat questionable here anyway since it
leads to the input code not working when the HDA driver is builtin
but input is in a loadable module. Replace this with a hard compile-time
dependency on CONFIG_INPUT. In practice this won't chance much
other than solve the compiler error because it is rare to require
sound output but no input support.
Murad Masimov [Mon, 3 Mar 2025 10:04:13 +0000 (13:04 +0300)]
ALSA: usx2y: validate nrpacks module parameter on probe
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Takashi Iwai [Sat, 1 Mar 2025 11:45:29 +0000 (12:45 +0100)]
ALSA: seq: Avoid module auto-load handling at event delivery
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Daniel Bárta [Thu, 27 Feb 2025 16:12:55 +0000 (17:12 +0100)]
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
After some digging around I have found that this laptop has Cirrus's smart
aplifiers connected to SPI bus (spi1-CSC3551:00-cs35l41-hda).
To get them correctly detected and working I had to modify patch_realtek.c
with ASUS EXPERTBOOK P5405CSA 1.0 SystemID (0x1043, 0x1f63) and add
corresponding hda_quirk (ALC245_FIXUP_CS35L41_SPI_2).
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
In commit 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo,
ASUS, Dell projects") Baojun adds a bunch of projects to the file,
including for the Ally X. Turns out the initial Ally X was not sorted
properly, so the kernel had 2 quirks for it.
The previous quirk overrode the new one due to being earlier and they
are different. When AB testing, the normal pin fixup seems to work ok
but causes a bit of a minor popping. Given the other config is more
complicated and may cause undefined behavior, revert it.
Adrien Vergé [Wed, 26 Feb 2025 13:55:15 +0000 (14:55 +0100)]
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b48 ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e8 ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a163 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b48 ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b48, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Mark Brown [Tue, 25 Feb 2025 17:47:04 +0000 (17:47 +0000)]
ASoC: Intel: don't check number of sdw links when set
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire
links. However, we do see a HW design that use PCH DMIC along with 3
SoundWire links. Remove the check and add warning to let users know that
SoundWire MIC and PCH DMIC are both present and they could overwrite it
with kernel params.
Takashi Iwai [Tue, 25 Feb 2025 15:45:32 +0000 (16:45 +0100)]
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASUS VivoBook 15 with SSID 1043:1460 took an incorrect quirk via the
pin pattern matching for ASUS (ALC256_FIXUP_ASUS_MIC), resulting in
the two built-in mic pins (0x13 and 0x1b). This had worked without
problems casually in the past because the right pin (0x1b) was picked
up as the primary device. But since we fixed the pin enumeration for
other bugs, the bogus one (0x13) is picked up as the primary device,
hence the bug surfaced now.
For addressing the regression, this patch explicitly specifies the
quirk entry with ALC256_FIXUP_ASUS_MIC_NO_PRESENCE, which sets up only
the headset mic pin.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219807 Link: https://patch.msgid.link/20250225154540.13543-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
Change calls to async regmap write functions to use the normal
blocking writes so that the cs35l56 driver can use spi_bus_lock() to
gain exclusive access to the SPI bus.
As this is part of a fix, it makes only the minimal change to swap the
functions to the blocking equivalents. There's no need to risk
reworking the buffer allocation logic that is now partially redundant.
The async writes are a 12-year-old workaround for inefficiency of
synchronous writes in the SPI subsystem. The SPI subsystem has since
been changed to avoid the overheads, so this workaround should not be
necessary.
The cs35l56 driver needs to use spi_bus_lock() prevent bus activity
while it is soft-resetting the cs35l56. But spi_bus_lock() is
incompatible with spi_async() calls, which will fail with -EBUSY.
Bard Liao [Tue, 25 Feb 2025 09:37:16 +0000 (17:37 +0800)]
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
Typically, SoundWire MIC and PCH DMIC will not coexist. However, we may
want to use both of them in some special cases. Add a warning to let
users know that SoundWire MIC and PCH DMIC are both present and they
could overwrite it with kernel params.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250225093716.67240-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao [Tue, 25 Feb 2025 09:37:15 +0000 (17:37 +0800)]
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
Currently, we assume that the PCH DMIC pins are pin-muxed with SoundWire
links. However, we do see a HW design that use PCH DMIC along with 3
SoundWire links. Remove the check now.
With this change the PCM DMIC will be presented if it is reported by the
BIOS irrespective of whether there are SDW links present or not.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250225093716.67240-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dapm-graph: set fill colour of turned on nodes
Some tools like KGraphViewer interpret the "ON" nodes not having an
explicitly set fill colour as them being entirely black, which obscures
the text on them and looks funny. In fact, I thought they were off for
the longest time. Comparing to the output of the `dot` tool, I assume
they are supposed to be white.
Instead of speclawyering over who's in the wrong and must immediately
atone for their wickedness at the altar of RFC2119, just be explicit
about it, set the fillcolor to white, and nobody gets confused.
Use different stream names to avoid such warnings.
DAI names in AUDMIX are also updated accordingly.
Fixes: 15c958390460 ("ASoC: fsl_sai: Add separate DAI for transmitter and receiver") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://patch.msgid.link/20250217010437.258621-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
The ES8328 codec driver, which is also used for the ES8388 chip that
appears to have an identical register map, claims that the output can
either take the route from DAC->Mixer->Output or through DAC->Output
directly. To the best of what I could find, this is not true, and
creates problems.
Without DACCONTROL17 bit index 7 set for the left channel, as well as
DACCONTROL20 bit index 7 set for the right channel, I cannot get any
analog audio out on Left Out 2 and Right Out 2 respectively, despite the
DAPM routes claiming that this should be possible. Furthermore, the same
is the case for Left Out 1 and Right Out 1, showing that those two don't
have a direct route from DAC to output bypassing the mixer either.
Those control bits toggle whether the DACs are fed (stale bread?) into
their respective mixers. If one "unmutes" the mixer controls in
alsamixer, then sure, the audio output works, but if it doesn't work
without the mixer being fed the DAC input then evidently it's not a
direct output from the DAC.
ES8328/ES8388 are seemingly not alone in this. ES8323, which uses a
separate driver for what appears to be a very similar register map,
simply flips those two bits on in its probe function, and then pretends
there is no power management whatsoever for the individual controls.
Fair enough.
My theory as to why nobody has noticed this up to this point is that
everyone just assumes it's their fault when they had to unmute an
additional control in ALSA.
Fix this in the es8328 driver by removing the erroneous direct route,
then get rid of the playback switch controls and have those bits tied to
the mixer's widget instead, which until now had no register to play
with.
Takashi Iwai [Tue, 18 Feb 2025 11:40:24 +0000 (12:40 +0100)]
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
We fixed the UAF issue in USB MIDI code by canceling the pending work
at closing each MIDI output device in the commit below. However, this
assumed that it's the only one that is tied with the endpoint, and it
resulted in unexpected data truncations when multiple devices are
assigned to a single endpoint and opened simultaneously.
For addressing the unexpected MIDI message drops, simply replace
cancel_work_sync() with flush_work(). The drain callback should have
been already invoked before the close callback, hence the port->active
flag must be already cleared. So this just assures that the pending
work is finished before freeing the resources.
Fixes: 0125de38122f ("ALSA: usb-audio: Cancel pending work at closing a MIDI substream") Reported-and-tested-by: John Keeping <jkeeping@inmusicbrands.com> Closes: https://lore.kernel.org/20250217111647.3368132-1-jkeeping@inmusicbrands.com Link: https://patch.msgid.link/20250218114024.23125-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 17 Feb 2025 17:00:30 +0000 (18:00 +0100)]
ALSA: seq: Drop UMP events when no UMP-conversion is set
When a destination client is a user client in the legacy MIDI mode and
it sets the no-UMP-conversion flag, currently the all UMP events are
still passed as-is. But this may confuse the user-space, because the
event packet size is different from the legacy mode.
Since we cannot handle UMP events in user clients unless it's running
in the UMP client mode, we should filter out those events instead of
accepting blindly. This patch addresses it by slightly adjusting the
conditions for UMP event handling at the event delivery time.
Vitaly Rodionov [Fri, 14 Feb 2025 21:07:28 +0000 (21:07 +0000)]
ALSA: hda/cirrus: Correct the full scale volume set logic
This patch corrects the full-scale volume setting logic. On certain
platforms, the full-scale volume bit is required. The current logic
mistakenly sets this bit and incorrectly clears reserved bit 0, causing
the headphone output to be muted.
virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLS
As defined in the specification, the `controls` field in the configuration
space is only valid/present if VIRTIO_SND_F_CTLS is negotiated.
From https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html:
5.14.4 Device Configuration Layout
...
controls
(driver-read-only) indicates a total number of all available control
elements if VIRTIO_SND_F_CTLS has been negotiated.
Let's use the same style used in virtio_blk.h to clarify this and to avoid
confusion as happened in QEMU (see link).
Wentao Liang [Thu, 13 Feb 2025 07:45:43 +0000 (15:45 +0800)]
ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()
Check the return value of snd_ctl_rename_id() in
snd_hda_create_dig_out_ctls(). Ensure that failures
are properly handled.
[ Note: the error cannot happen practically because the only error
condition in snd_ctl_rename_id() is the missing ID, but this is a
rename, hence it must be present. But for the code consistency,
it's safer to have always the proper return check -- tiwai ]
Shengjiu Wang [Thu, 13 Feb 2025 07:05:18 +0000 (15:05 +0800)]
ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device
When defer probe happens, there may be below error:
platform 59820000.sai: Resources present before probing
The cpu_mclk clock is from the cpu dai device, if it is not released,
then the cpu dai device probe will fail for the second time.
The cpu_mclk is used to get rate for rate constraint, rate constraint
may be specific for each platform, which is not necessary for machine
driver, so remove it.
Baojun Xu [Tue, 11 Feb 2025 08:39:41 +0000 (16:39 +0800)]
ALSA: hda/tas2781: Update tas2781 hda SPI driver
Because firmware issue of platform, found spi device is not stable,
so add status check before firmware download, and remove some
operations which is not must in current stage.
Stefan Binding [Mon, 10 Feb 2025 16:32:50 +0000 (16:32 +0000)]
ASoC: cs35l41: Fix acpi_device_hid() not found
Function acpi_device_hid() is only defined if CONFIG_ACPI is set.
Use #ifdef CONFIG_ACPI to ensure that cs35l41 driver only calls this
function is CONFIG_ACPI is define.
Fixes: 1d44a30ae3f9 ("ASoC: cs35l41: Fallback to using HID for system_name if no SUB is available") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502090100.SbXmGFqs-lkp@intel.com/ Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20250210163256.1722350-1-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
In some cases, e.g. during resuming from suspend, there is a possibility
that some IPC reply messages get received by the host while the DSP
firmware has not yet reached the complete boot state.
Detect when this happens and do not attempt to process the unexpected
replies from DSP. Instead, provide proper debugging support.
Stress testing resume from suspend on Valve Steam Deck OLED (Galileo)
revealed that the DSP firmware could enter an unrecoverable faulty
state, where the kernel ring buffer is flooded with IPC related error
messages:
[ +0.017002] snd_sof_amd_vangogh 0000:04:00.5: acp_sof_ipc_send_msg: Failed to acquire HW lock
[ +0.000054] snd_sof_amd_vangogh 0000:04:00.5: ipc3_tx_msg_unlocked: ipc message send for 0x30100000 failed: -22
[ +0.000005] snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
[ +0.000004] snd_sof_amd_vangogh 0000:04:00.5: Failed to restore pipeline after resume -22
[ +0.000003] snd_sof_amd_vangogh 0000:04:00.5: PM: dpm_run_callback(): pci_pm_resume returns -22
[ +0.000009] snd_sof_amd_vangogh 0000:04:00.5: PM: failed to resume async: error -22
[...]
[ +0.002582] PM: suspend exit
[ +0.065085] snd_sof_amd_vangogh 0000:04:00.5: ipc tx error for 0x30130000 (msg/reply size: 12/0): -22
[ +0.000499] snd_sof_amd_vangogh 0000:04:00.5: error: failed widget list set up for pcm 1 dir 0
[ +0.000011] snd_sof_amd_vangogh 0000:04:00.5: error: set pcm hw_params after resume
[ +0.000006] snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_pcm_component_prepare on 0000:04:00.5: -22
[...]
A system reboot would be necessary to restore the speakers
functionality.
However, by delaying a bit any host to DSP transmission right after
the firmware boot completed, the issue could not be reproduced anymore
and sound continued to work flawlessly even after performing thousands
of suspend/resume cycles.
Introduce the post_fw_run_delay ACP quirk to allow providing the
aforementioned delay via the snd_sof_dsp_ops->post_fw_run() callback for
the affected devices.
Mark Brown [Thu, 6 Feb 2025 16:16:38 +0000 (16:16 +0000)]
ASoC: SOF: Correct sps->stream and cstream nullity
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The Nullity of sps->cstream needs to be checked in sof_ipc_msg_data() and not
assume that it is not NULL.
The sps->stream must be cleared to NULL on close since this is used as a check
to see if we have active PCM stream.
Terry Cheong [Thu, 6 Feb 2025 09:47:23 +0000 (11:47 +0200)]
ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module
In enviornment without KMOD requesting module may fail to load
snd-hda-codec-hdmi, resulting in HDMI audio not usable.
Add softdep to loading HDMI codec module first to ensure we can load it
correctly.
Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Johny Lin <lpg76627@gmail.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250206094723.18013-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 6 Feb 2025 08:46:42 +0000 (10:46 +0200)]
ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers
Other, non DAI copier widgets could have the same stream name (sname) as
the ALH copier and in that case the copier->data is NULL, no alh_data is
attached, which could lead to NULL pointer dereference.
We could check for this NULL pointer in sof_ipc4_prepare_copier_module()
and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai()
will miscalculate the ALH device count, causing broken audio.
The correct fix is to harden the matching logic by making sure that the
1. widget is a DAI widget - so dai = w->private is valid
2. the dai (and thus the copier) is ALH copier
Fixes: a150345aa758 ("ASoC: SOF: ipc4-topology: add SoundWire/ALH aggregation support") Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Link: https://github.com/thesofproject/sof/pull/9652 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20250206084642.14988-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Binding [Wed, 5 Feb 2025 16:48:04 +0000 (16:48 +0000)]
ASoC: cs35l41: Fallback to using HID for system_name if no SUB is available
For systems which load firmware on the cs35l41 which use ACPI, the
_SUB value is used to differentiate firmware and tuning files for the
individual systems. In the case where a system does not have a _SUB
defined in ACPI node for cs35l41, there needs to be a fallback to
allow the files for that system to be differentiated. Since all
ACPI nodes for cs35l41 should have a HID defined, the HID should be a
safe option.
Vitaly Rodionov [Wed, 5 Feb 2025 16:08:46 +0000 (16:08 +0000)]
ASoC: arizona/madera: use fsleep() in up/down DAPM event delays.
Using `fsleep` instead of `msleep` resolves some customer complaints
regarding the precision of up/down DAPM event timing. `fsleep()`
automatically selects the appropriate sleep function, making the delay
time more predictable.
Peter Ujfalusi [Wed, 5 Feb 2025 13:52:32 +0000 (15:52 +0200)]
ASoC: SOF: pcm: Clear the susbstream pointer to NULL on close
The spcm->stream[substream->stream].substream is set during open and was
left untouched. After the first PCM stream it will never be NULL and we
have code which checks for substream NULLity as indication if the stream is
active or not.
For the compressed cstream pointer the same has been done, this change will
correct the handling of PCM streams.
Fixes: 090349a9feba ("ASoC: SOF: Add support for compress API for stream data/offset") Cc: stable@vger.kernel.org Reported-by: Curtis Malainey <cujomalainey@chromium.org> Closes: https://github.com/thesofproject/linux/pull/5214 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://patch.msgid.link/20250205135232.19762-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Wed, 5 Feb 2025 13:52:31 +0000 (15:52 +0200)]
ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data()
The nullity of sps->cstream should be checked similarly as it is done in
sof_set_stream_data_offset() function.
Assuming that it is not NULL if sps->stream is NULL is incorrect and can
lead to NULL pointer dereference.
Fixes: 090349a9feba ("ASoC: SOF: Add support for compress API for stream data/offset") Cc: stable@vger.kernel.org Reported-by: Curtis Malainey <cujomalainey@chromium.org> Closes: https://github.com/thesofproject/linux/pull/5214 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://patch.msgid.link/20250205135232.19762-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver supports Synchronous SRC Mode, but HW allow to update
rate only within 1% from current rate. Adjust to it.
Becially, this feature is used to fine-tune subtle difference that occur
during sampling rate conversion in SRC. So, it should be called within 1%
margin of rate difference.
If there was difference over 1%, it will apply with 1% increments by using
loop without indicating error message.
ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime()
rsnd_kctrl_accept_runtime() (1) is used for runtime convert rate
(= Synchronous SRC Mode). Now, rsnd driver has 2 kctrls for it
(A): "SRC Out Rate Switch"
(B): "SRC Out Rate" // it calls (1)
(A): can be called anytime
(B): can be called only runtime, and will indicate warning if it was used
at non-runtime.
To use runtime convert rate (= Synchronous SRC Mode), user might uses
command in below order.
(X): > amixer set "SRC Out Rate" on
> aplay xxx.wav &
(Y): > amixer set "SRC Out Rate" 48010 // convert rate to 48010Hz
(Y): calls B
(X): calls both A and B.
In this case, when user calls (X), it calls both (A) and (B), but it is not
yet start running. So, (B) will indicate warning.
This warning was added by commit b5c088689847 ("ASoC: rsnd: add warning
message to rsnd_kctrl_accept_runtime()"), but the message sounds like the
operation was not correct. Let's update warning message.
The message is very SRC specific, implement it in src.c
ALSA: hda/realtek: Limit mic boost on Positivo ARN50
The internal mic boost on the Positivo ARN50 is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
commit 90de551c1bf ("ASoC: simple-card-utils.c: enable multi Component
support") added muiti Component support, but was missing to add
dlc->of_node. Because of it, Sound device list will indicates strange
name if it was DPCM connection and driver supports dai->driver->dai_args,
like below
John Keeping [Tue, 4 Feb 2025 16:13:10 +0000 (16:13 +0000)]
ASoC: rockchip: i2s-tdm: fix shift config for SND_SOC_DAIFMT_DSP_[AB]
Commit 2f45a4e289779 ("ASoC: rockchip: i2s_tdm: Fixup config for
SND_SOC_DAIFMT_DSP_A/B") applied a partial change to fix the
configuration for DSP A and DSP B formats.
The shift control also needs updating to set the correct offset for
frame data compared to LRCK. Set the correct values.
ASoC: Intel: sof_sdw: Add lookup of quirk using PCI subsystem ID
Add lookup of PCI subsystem vendor:device ID to find a quirk.
The subsystem ID (SSID) is part of the PCI specification to uniquely
identify a particular system-specific implementation of a hardware
device.
Unlike DMI information, it identifies the sound hardware itself, rather
than a specific model of PC. SSID can be more reliable and stable than
DMI strings, and is preferred by some vendors as the way to identify
the actual sound hardware.
ASoC: fsl_micfil: Enable default case in micfil_set_quality()
If 'micfil->quality' received from micfil_quality_set() somehow ends
up with an unpredictable value, switch() operator will fail to
initialize local variable qsel before regmap_update_bits() tries
to utilize it.
While it is unlikely, play it safe and enable a default case that
returns -EINVAL error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Linus Torvalds [Sun, 2 Feb 2025 18:49:13 +0000 (10:49 -0800)]
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Linus Torvalds [Sun, 2 Feb 2025 18:40:27 +0000 (10:40 -0800)]
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Len Brown [Sun, 2 Feb 2025 16:43:02 +0000 (10:43 -0600)]
tools/power turbostat: version 2025.02.02
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Linus Torvalds [Sat, 1 Feb 2025 23:07:56 +0000 (15:07 -0800)]
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
Linus Torvalds [Sat, 1 Feb 2025 19:30:41 +0000 (11:30 -0800)]
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
Linus Torvalds [Sat, 1 Feb 2025 18:04:29 +0000 (10:04 -0800)]
Merge tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
Linus Torvalds [Sat, 1 Feb 2025 17:49:20 +0000 (09:49 -0800)]
Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
Linus Torvalds [Sat, 1 Feb 2025 17:15:01 +0000 (09:15 -0800)]
Merge tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org. Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.
Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org> Cc: Carlos Bilbao <bilbao@vt.edu> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mattew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
Zhaoyang Huang [Tue, 21 Jan 2025 02:01:59 +0000 (10:01 +0800)]
mm: gup: fix infinite loop within __get_longterm_locked
We can run into an infinite loop in __get_longterm_locked() when
collect_longterm_unpinnable_folios() finds only folios that are isolated
from the LRU or were never added to the LRU. This can happen when all
folios to be pinned are never added to the LRU, for example when
vm_ops->fault allocated pages using cma_alloc() and never added them to
the LRU.
Fix it by simply taking a look at the list in the single caller, to see if
anything was added.
[zhaoyang.huang@unisoc.com: move definition of local] Link: https://lkml.kernel.org/r/20250122012604.3654667-1-zhaoyang.huang@unisoc.com Link: https://lkml.kernel.org/r/20250121020159.3636477-1-zhaoyang.huang@unisoc.com Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()") Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aijun Sun <aijun.sun@unisoc.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 30 Jan 2025 11:51:31 +0000 (19:51 +0800)]
mm, swap: fix reclaim offset calculation error during allocation
There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed. This may cause corruption of the swap
map, so fix it.
Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com Fixes: 3b644773eefd ("mm, swap: reduce contention on device lock") Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marco Elver [Fri, 24 Jan 2025 12:01:38 +0000 (13:01 +0100)]
kfence: skip __GFP_THISNODE allocations on NUMA systems
On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.
Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.
Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com Fixes: 236e9f153852 ("kfence: skip all GFP_ZONEMASK allocations") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Alexander Potapenko <glider@google.com> Cc: Chistoph Lameter <cl@linux.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nilfs2: fix possible int overflows in nilfs_fiemap()
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
yangge [Sat, 25 Jan 2025 06:53:57 +0000 (14:53 +0800)]
mm: compaction: use the proper flag to determine watermarks
There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory. I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.
Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.
For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point. This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.
Call trace:
__alloc_pages_slowpath
if (compact_result == COMPACT_SKIPPED ||
compact_result == COMPACT_DEFERRED)
goto nopage; // should exit __alloc_pages_slowpath() from here
We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted. There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead. But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.
After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.
Liam R. Howlett [Mon, 27 Jan 2025 17:02:21 +0000 (12:02 -0500)]
kernel: be more careful about dup_mmap() failures and uprobe registering
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.
Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/ Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bruno Faccini [Mon, 27 Jan 2025 17:16:23 +0000 (09:16 -0800)]
mm/fake-numa: handle cases with no SRAT info
Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases
Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com Fixes: 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”) Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Len Brown <lenb@kernel.org> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Catalin Marinas [Mon, 27 Jan 2025 18:42:33 +0000 (18:42 +0000)]
mm: kmemleak: fix upper boundary check for physical address objects
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit 6c99d4eb7c5e ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit 84c326299191 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com Fixes: 84c326299191 ("mm: kmemleak: check physical address when scan") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Cc: Patrick Wang <patrick.wang.shcn@gmail.com> Cc: <stable@vger.kernel.org> [6.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hamza Mahfooz [Mon, 20 Jan 2025 20:56:59 +0000 (15:56 -0500)]
mailmap: add an entry for Hamza Mahfooz
Map my previous work email to my current one.
Link: https://lkml.kernel.org/r/20250120205659.139027-1-hamzamahfooz@linux.microsoft.com Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hans verkuil <hverkuil@xs4all.nl> Cc: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / thirdparty / linux.git / log
