soundwire: intel: increase maximum number of links
Intel platforms have enabled 4 links since the beginning, newer
platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of
links was hard-coded. A follow-up patch will add a dynamic check that
the ACPI-reported information is aligned with hardware capabilities on
newer platforms.
Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240819005548.5867-4-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS
The definitions are currently duplicated in intel-sdw-acpi.c and
sof_sdw.c. Move the definition to the sdw_intel.h header, and change
the prefix to make it Intel-specific.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240819005548.5867-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250
we seems to have ended up with duplicate clocks for frame-sync on sm8250,
it has both va and fsgen which are exactly same things. Remove the redundant
va clock and make it align with other SoCs.
Codec driver does not even handle va clock, so remove this from the
bindings and examples to avoid any confusion.
Shenghao Ding [Thu, 15 Aug 2024 04:21:35 +0000 (12:21 +0800)]
ASoc: tas2781: Remove unnecessary line feed and space
Remove unnecessary line feed for tasdevice_dsp_create_ctrls,
and remove two unnecessary spaces in tas2563_digital_gain_get
and tas2563_digital_gain_put.
Fabio Estevam [Thu, 8 Aug 2024 18:49:44 +0000 (15:49 -0300)]
ASoC: imx-pcm-rpmsg: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:43 +0000 (15:49 -0300)]
ASoC: imx-audmux: Switch to SYSTEM_SLEEP_PM_OPS
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:42 +0000 (15:49 -0300)]
ASoC: fsl_ssi: Switch to SYSTEM_SLEEP_PM_OPS
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions are used at
build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:41 +0000 (15:49 -0300)]
ASoC: fsl_spdif: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:40 +0000 (15:49 -0300)]
ASoC: fsl_rpmsg: Switch to RUNTIME_PM_OPS()
Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS()
alternative.
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:39 +0000 (15:49 -0300)]
ASoC: fsl_mqs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Fabio Estevam [Thu, 8 Aug 2024 18:49:38 +0000 (15:49 -0300)]
ASoC: fsl_audmix: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Mark Brown [Thu, 8 Aug 2024 20:57:13 +0000 (21:57 +0100)]
ASoC: tas*: Fix up GPIO usage
Merge series from Linus Walleij <linus.walleij@linaro.org>:
The TI TAS drivers use some legacy GPIO code and headers,
this series fixes it up.
The TAS2781 is a special case since it adds a handful of
lines of deviating code to reconfigure a GPIO line for
IRQ mode and then never actually use the IRQ obtained in
the code. Is the line used by autonomous hardware? I'm
puzzled by this.
Anyways the patch suggest how to solve this properly by
fixing the parent irqchip and I'm happy to help.
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct snd_sof_pcm` ends in a flexible-array member through
`struct snd_soc_tplg_pcm` -> `struct snd_soc_tplg_private`.
Whith this, fix the following warnings:
sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
./include/trace/events/../../../sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/amd/../sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/intel/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8186/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8195/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
ASoC: amd: acp: add ZSC control register programming sequence
Add ZSC Control register programming sequence for ACP D0 and D3 state
transitions for ACP7.0 onwards. This will allow ACP to enter low power
state when ACP enters D3 state. When ACP enters D0 State, ZSC control
should be disabled.
ASoC: amd: acp: remove MODULE_ALIAS for SoundWire machine driver
As module device table added for AMD SoundWire machine driver MODULE_ALIAS
is not required. Remove MODULE_ALIAS for AMD SoundWire machine driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240807050846.1616725-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Simon Trimmer [Wed, 7 Aug 2024 14:27:15 +0000 (14:27 +0000)]
ASoC: cs35l56: Use regmap_read_bypassed() to wake the device
Now that regmap_read_bypassed() has been added to the kernel it is
preferable to wake the device with a read rather than a write as the
utility function can be called at a time before the device has been
identified.
Linus Walleij [Wed, 7 Aug 2024 15:02:34 +0000 (17:02 +0200)]
ASoC: tas*: Drop unused GPIO includes
These drivers all use <linux/gpio/consumer.h> and has no business
including the legacy headers <linux/gpio.h> or <linux/of_gpio.h>.
Drop the surplus includes.
Linus Walleij [Wed, 7 Aug 2024 15:02:33 +0000 (17:02 +0200)]
ASoC: tas2781-i2c: Get the right GPIO line
The code is obtaining a GPIO reset using the reset GPIO
name "reset-gpios", but the gpiolib is already adding the
suffix "-gpios" to anything passed to this function and
will be looking for "reset-gpios-gpios" which is most
certainly not what the author desired.
Linus Walleij [Wed, 7 Aug 2024 15:02:32 +0000 (17:02 +0200)]
ASoC: tas2781-i2c: Drop weird GPIO code
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
test-component driver is using it, but this is because it indicates used
function for debug/trace purpose. Except test-component driver, bespoke
trigger has never been used over 10 years in upstream.
We can re-support it if needed in the future, but let's remove it for now,
because it just noise in upstream.
Mark Brown [Tue, 6 Aug 2024 12:42:45 +0000 (13:42 +0100)]
ASoC: Extend wm_adsp so cs35l56 can suppress controls
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
This pair of patches extend wm_adsp to add a callback that can be used
to control whether ALSA controls are added and then tweak cs35l56 to use
it to suppress controls made from firmware coefficients.
ASoC: cs35l56: Handle OTP read latency over SoundWire
Use the late-read buffer in the CS35L56 SoundWire interface to
read OTP memory.
The OTP memory has a longer access latency than chip registers
and cannot guarantee to return the data value in the SoundWire
control response if the bus clock is >4.8 MHz. The Cirrus
SoundWire peripheral IP exposes the bridge-to-bus read buffer
and status bits. For a read from OTP the bridge status bits are
polled to wait for the OTP data to be loaded into the read buffer
and the data is then read from there.
Johan Hovold [Mon, 29 Jul 2024 13:13:51 +0000 (15:13 +0200)]
ASoC: codecs: lpass-macro: fix missing codec version
Recent changes that started checking the codec version broke audio on
the Lenovo ThinkPad X13s:
wsa_macro 3240000.codec: Unsupported Codec version (0)
wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22
rx_macro 3200000.rxmacro: Unsupported Codec version (0)
rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22
Add the missing codec version to the lookup table so that the codec
drivers probe successfully.
Note that I'm just assuming that this is a 2.0 codec based on the fact
that this device uses the older register layout.
Fixes: 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version") Fixes: dbacef05898d ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions") Fixes: 727de4fbc546 ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240729131351.27886-1-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Simon Trimmer [Mon, 5 Aug 2024 10:27:21 +0000 (10:27 +0000)]
ASoC: cs35l56: Stop creating ALSA controls for firmware coefficients
A number of laptops have gone to market with old firmware versions that
export controls that have since been hidden, but we can't just install a
newer firmware because the firmware for each product is customized and
qualified by the OEM. The issue is that alsactl save and restore has no
idea what controls are good to persist which can lead to
misconfiguration.
There is no reason that the UCM or user should need to interact with any
of the ALSA controls for the firmware coefficients so they can be
removed entirely.
Mark Brown [Fri, 2 Aug 2024 21:26:47 +0000 (22:26 +0100)]
ASoC: SOF: reshuffle and optimize structures
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
pahole reports a number of sub-optimal structure definitions with
holes and cache-line alignment problems, this patchset optimizes a
couple of structure frequently used.
No functionality change, only re-ordering of structure members.
In order to constify `snd_soc_component_driver` struct, duplicate
`soc_component_dev_cs43130` into a `soc_component_dev_cs43130_digital` and
`soc_component_dev_cs43130_analog`.
These 2 new structures share the same .dapm_widgets and .dapm_routes
arrays but differ for .num_dapm_widgets and .num_dapm_routes.
In the digital case, the last entries are not taken into account.
Doing so has several advantages:
- `snd_soc_component_driver` can be declared as const to move their
declarations to read-only sections.
- code in the probe is simpler. There is no need to concatenate some
arrays to handle the "analog" case
- this saves some memory because all_hp_widgets and analog_hp_routes can
be removed.
Before :
======
text data bss dec hex filename
53965 8265 4512 66742 104b6 sound/soc/codecs/cs43130.o
After :
=====
text data bss dec hex filename
54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o
Yue Haibing [Fri, 2 Aug 2024 10:10:44 +0000 (18:10 +0800)]
ASoC: fsl: lpc3xxx: Make some symbols static
These symbols are not used outside of the files, make them static to fix
sparse warnings:
sound/soc/fsl/lpc3xxx-i2s.c:261:30: warning: symbol 'lpc3xxx_i2s_dai_ops' was not declared. Should it be static?
sound/soc/fsl/lpc3xxx-i2s.c:271:27: warning: symbol 'lpc3xxx_i2s_dai_driver' was not declared. Should it be static?
sound/soc/fsl/lpc3xxx-pcm.c:55:39: warning: symbol 'lpc3xxx_soc_platform_driver' was not declared. Should it be static?
In order to constify `snd_soc_component_driver` struct, simplify the logic
and the `sti_sas_dev_data` struct.
Since commit 165a57a3df02 ("ASoC: sti-sas: clean legacy in sti-sas") only
only chip is supported and `sti_sas_driver` can be fully defined at
compilation time.
Before:
======
text data bss dec hex filename
8033 1547 16 9596 257c sound/soc/codecs/sti-sas.o
After:
=====
text data bss dec hex filename
8257 1163 16 9436 24dc sound/soc/codecs/sti-sas.o
Charles Keepax [Fri, 2 Aug 2024 10:57:34 +0000 (11:57 +0100)]
ASoC: cs42l43: Cache shutter IRQ control pointers
The microphone/speaker privacy shutter ALSA control handlers need to
call pm_runtime_resume, since the hardware needs to be powered up to
check the hardware state of the shutter. The IRQ handler for the
shutters also needs to notify the ALSA control to inform user-space
the shutters updated. However this leads to a mutex inversion,
between the sdw_dev_lock and the controls_rwsem.
To avoid this mutex inversion cache the kctl pointers before the IRQ
handler, which avoids the need to lookup the control and take the
controls_rwsem.
Charles Keepax [Fri, 2 Aug 2024 10:57:32 +0000 (11:57 +0100)]
ASoC: soc-component: Add new snd_soc_component_get_kcontrol() helpers
Add new helper functions snd_soc_component_get_kcontrol() and
snd_soc_component_get_kcontrol_locked() that returns a kcontrol
by name, but will factor in the components name_prefix, to handle
situations where multiple components are present with the same
controls.
Mark Brown [Thu, 1 Aug 2024 19:15:22 +0000 (20:15 +0100)]
ALSA/ASoC: use snd_pcm_direction_name()
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Many drivers are selecting strings "playback" / "capture" by own
handling, but we have snd_pcm_direction_name() function for it.
This patch use it.
One note is that snd_pcm_direction_name() will select
"Playback" and "Capture", instead of "playback" / "capture".
Almost all drivers are using it as dev_dbg() or dev_err()
so no problem. But some other drivers are using it as other
purpose. It might be issue (?). For example ASoC debugfs dir name
will be changed by this patch.
Mark Brown [Thu, 1 Aug 2024 15:50:43 +0000 (16:50 +0100)]
AMD SOF based generic SoundWire machine driver
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series majorly consists of below changes.
- Rename structures, macros and codec helper names used in Intel
SoundWire generic driver to make it generic.
- Move Intel SoundWire driver common structures, macros and codec
helper functions to common placeholder so that it can be used by
other platform machine driver.
- Refactor few SoundWire common codec helper functions.
- AMD SOF based generic SoundWire machine driver for ACP 6.3 variant.
This work started a couple of months ago to avoid duplication of code
that wasn't really Intel-specific in the "sof_sdw" machine driver.
The code went through multiple iterations, was tested for multiple weeks
and a couple of build issues reported by the Intel kbuild bots were
corrected.
This is the initial version of SoundWire machine driver for AMD
platforms. Additional code refactoring will be done in the next step on
the AMD side.
Use of_property_read_bool() to read boolean properties rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
ASoC: soc-acpi: add pci revision id field in mach params structure
Few IP's may have same PCI vendor id and device id and
different revision id. Add revision id field to the
'snd_soc_acpi_mach_params' so that using this field platform
specific implementation can be added in machine driver.
ASoC: intel/sdw_utils: refactor init_dai_link() and init_simple_dai_link()
To make it generic, refactor existing implementation for
init_dai_link() and init_simple_dai_link() as mentioned below.
- Move init_dai_link() and init_simple_dai_link() to common place holder
- Rename the functions with "asoc_sdw" as prefix.
- Pass the platform specific 'platform_component' structure and its size as
arguments for init_simple_dai_link() function and allocate one more
extra dlc for platform component.
- Pass the 'platform_component' and 'num_platforms' as arguments for
init_dai_link().
ASoC: sdw_utils: refactor sof_sdw_card_late_probe function
Refactor sof_sdw_card_late_probe() function and derive a generic
function soc_sdw_card_late_probe() function which can be used by
SoundWire generic machine driver.
ASoC: intel/sdw_utils: move machine driver dai link helper functions
Move machine driver dai link helper functions to common place holder,
So that it can be used by other platform machine driver.
Rename these functions with "asoc_sdw" tag as a prefix.
SoundWire 'codec_info_list' structure is not a platform specific one.
Move codec_info_list structure to common file soc_sdw_utils.c.
Move codec helper functions which uses codec_info_list structure to common
place holder and rename the function by adding _sdw tag. This will allow
to use 'codec_info_list' structure and it's helper functions in other
platform machine driver.
Move RTK amp codec helper functions related implementation to common
place holder to make it generic so that these helper functions will be
used by other platform machine driver modules.
ASoC: intel/sdw_utils: move rtk jack common helper functions
Move RTK codec jack common helper functions to common place holder
(sdw_utils folder) to make it generic so that it will be used by
other platform machine driver code.
ASoC: intel: split soundwire machine driver private data
Split intel generic SoundWire machine driver private data into two
structures. One structure is generic one which can be used by other
platform machine driver and the other one is intel specific one.
Move generic machine driver private data to soc_sdw_utils.h.
Define a void pointer in generic machine driver private data structure
and assign the vendor specific structure in mc_probe() call.
Move below Intel SoundWire machine driver helper functions to
soc_sdw_utils.c file so that it can be used by other platform machine
driver.
- asoc_sdw_is_unique_device()
- asoc_sdw_get_codec_name()
ASoC: intel: move soundwire machine driver common structures
Move intel generic SoundWire machine driver common structures to
soc_sdw_utils.h file. These structures will be used in other platform
SoundWire machine driver code.
Rename 'ignore_pch_dmic' variable name as 'ignore_internal_dmic'.
This variable will be moved to common header file and will be used by other
platform machine driver code.
ASoC: intel: rename codec_info and dai_info structures names
To make it generic, rename structure 'sof_sdw_codec_info' as
'asoc_sdw_codec_info' and 'sof_sdw_dai_info' as 'asoc_sdw_dai_info'.
These structures will be moved to common header file so that it can
be used by other platform machine driver.
Default firmware shipped in open source are not licensed for 3P
libraries, therefore topologies should not reference them.
If a OS wants to use 3P (that they have licensed) then they should use
the appropriate topology override mechanisms.
Fixes: 8a7d5d85ed2161 ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies") Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Cc: Wojciech Macek <wmacek@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240731212153.921327-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
NAU8822 codec PLL parameters are not an information that the general
user should care about, this print is supposed to be used for debugging,
adjust the debug print priority accordingly.
projects / thirdparty / linux.git / log
