Ulrich Weigand [Wed, 3 Dec 2014 14:38:46 +0000 (15:38 +0100)]
Use core regset iterators on Sparc Solaris
Remove native-only core file handling on Sparc Solaris. Instead,
enable the sparc target generic core regset logic on Solaris by
providing appropriate register offset maps.
Thanks to Joel Brobecker for testing!
gdb/
* config/sparc/sol2.mh (NATDEPFILES): Remove core-regset.o.
* sparc-sol2-tdep.c: Include "regset.h".
(sparc32_sol2_supply_core_gregset): New function.
(sparc32_sol2_collect_core_gregset): Likewise.
(sparc32_sol2_supply_core_fpregset): Likewise.
(sparc32_sol2_collect_core_fpregset): Likewise.
(sparc32_sol2_gregset, sparc32_sol2_fpregset): New variables.
(sparc32_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
tdep->fpregset/sizeof_fpregset.
* sparc64-sol2-tdep.c: Include "regset.h".
(sparc64_sol2_supply_core_gregset): New function.
(sparc64_sol2_collect_core_gregset): Likewise.
(sparc64_sol2_supply_core_fpregset): Likewise.
(sparc64_sol2_collect_core_fpregset): Likewise.
(sparc64_sol2_gregset, sparc64_sol2_fpregset): New variables.
(sparc64_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
tdep->fpregset/sizeof_fpregset.
Joel Brobecker [Wed, 3 Dec 2014 07:33:13 +0000 (02:33 -0500)]
callback.h:struct host_callback_struct compilation error on Windows hosts.
On Windows, a recent gnulib update imported the lstat module, and
this caused a remote-sim.c build failure in struct host_callback_struct:
In file included from /[...]/gdb/remote-sim.c:34:0:
/[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64'
int (*lstat) (host_callback *, const char *, struct stat *);
^
What happens it that gnulib's stat.h makes the following defines:
/* Large File Support on native Windows. */
#if 1
# define stat _stati64
#endif
and then:
#if 1
# if ! 0
/* mingw does not support symlinks, therefore it does not have lstat. But
without links, stat does just fine. */
# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
# define lstat stat
# endif
So, the following fields in struct host_callback_struct...
int (*stat) (host_callback *, const char *, struct stat *);
int (*fstat) (host_callback *, int, struct stat *);
int (*lstat) (host_callback *, const char *, struct stat *);
... get translated to...
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
int (*_fstati64) (host_callback *, int, struct _stati64 *);
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
... which causes two fields to have the same name.
This patch fixes the issue by renaming the stat-related fields
by adding a "to_" prefix, similar to what is done in GDB's
target_ops vector.
include/gdb/ChangeLog:
* callback.h (struct host_callback_struct) <to_stat>: Renamed
from "stat".
<to_fstat>: Renamed from "fstat".
<to_lstat>: Renamed from "lstat".
sim/common/ChangeLog:
* sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat"
and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp)
callbacks following renaming in callback.h.
* syscall.c (cb_syscall): Likewise. Adjust calls to "lstat"
callback by call to "to_lstat" callback
sim/cris/ChangeLog:
* traps.c (cris_break_13_handler): Adjust call to "fstat" callback
by call to "to_fstat" following renaming in callback.h.
sim/h8300/ChangeLog:
* compile.c (sim_resume): Adjust calls to "stat" and "fstat"
callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks
following renaming in callback.h.
Doug Evans [Wed, 3 Dec 2014 00:54:16 +0000 (16:54 -0800)]
Remove cplus_specific from general_symbol_info.
This patch reverts the addition of cplus_specific added here:
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
argument.
(cplus_specific): New struct.
* symtab.c (symbol_set_demangled_name): Updated.
Use cplus_specific for cplus symbols.
(symbol_get_demangled_name): Retrive the name from the cplus_specific
struct for cplus symbols.
(symbol_init_language_specific): Set cplus_specific for cplus symbols.
(symbol_set_names): Pass objfile to symbol_set_demangled_name.
* symtab.c (symbol_init_cplus_specific): New function.
It was added in anticipation of improved template support:
However, minsyms pay the price for this space too.
For my standard benchmark this patch gets back 44MB of memory
when gdb starts. [There's still ~440MB of memory used
by the demangled ELF symbols of this benchmark, but that's another topic.]
When the improved templated support is added,
I wonder if this can be moved to struct symbol.
Hmmm, we already have a special version of
struct symbol for templates (struct template_symbol).
H.J. Lu [Wed, 3 Dec 2014 00:50:14 +0000 (16:50 -0800)]
Discard space for relocs against symbols with copy relocs
This patch reverts the change in elf_x86_64_check_relocs and the partial
change in elf_x86_64_adjust_dynamic_symbol. Instead, we discard space
in PIE for relocs against symbols which turn out to need copy relocs.
* elf64-x86-64.c (elf_x86_64_check_relocs): Revert the last
change.
(elf_x86_64_adjust_dynamic_symbol): Don't check !info->shared
with ELIMINATE_COPY_RELOCS.
(elf_x86_64_allocate_dynrelocs): For PIE, discard space for
relocs against symbols which turn out to need copy relocs.
H.J. Lu [Tue, 2 Dec 2014 23:14:28 +0000 (15:14 -0800)]
X86-64: Allow copy relocs for building PIE
This patch allows copy relocs for non-GOT pc-relative relocation in PIE.
bfd/
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Always
allow copy relocs for building executables.
(elf_x86_64_check_relocs): Allow copy relocs for non-GOT
pc-relative relocation in shared object.
(elf_x86_64_adjust_dynamic_symbol): Allocate copy relocs for
PIE.
(elf_x86_64_relocate_section): Don't copy a pc-relative
relocation into the output file if the symbol needs copy reloc.
Andreas Arnez [Tue, 2 Dec 2014 15:35:47 +0000 (16:35 +0100)]
execl-update-breakpoints.exp: Move whole segment instead of .text section
The test case builds two copies of the program, one with the compile
option "ldflags=-Wl,-Ttext=0x1000000" and the other with the address
changed to 0x2000000. However, when linking with ld.bfd, the
resulting executables crash early in ld.so on S390 and i386.
Analysis of the crash: The default linker script establishes a certain
order of loadable sections, and the option "-Ttext" effectively splits
these into an "unaffected" lot (everything before .text) and an
"affected" lot. The affected lot is placed at the given address,
whereas the unaffected lot stays at its default address. The
unaffected lot starts at an aligned address plus Elf header sizes,
which is good if it is the first LOAD segment (like on AMD64). But if
the affected lot comes first instead (like on S390 and i386), the PHDR
doesn't fit there and is placed *outside* any LOAD segments. Then the
PHDR is not mapped when the loader gets control, and the loader runs
into a segmentation fault while trying to access it.
Since we are lucky about the order of segments on AMD64, the test
succeeds there, but the resulting binaries are unusually large -- 2.1M
each, with lots of padding within.
When replacing '-Ttext' by '-Ttext-segment', the linker moves all
segments consistently, the binaries have normal sizes, and the test
case succeeds on all mentioned platforms.
Since old versions of the gold linker don't support '-Ttext-segment',
the patch also adds logic for falling back to '-Ttext'.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp: Specify the link address
with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
if the linker doesn't understand this.
Andrew Bennett [Thu, 20 Nov 2014 15:40:16 +0000 (15:40 +0000)]
[MIPS] When calculating a relocation using an undefined weak symbol don't check for overflow.
In MIPS the relocation calculation only ignores the overflow checks for undefined
weak symbols on relocations associated with j/jal. This patch extends this to
the relocations used by the: b* instructions; pc/gp relative symbol offsets; and the
lwpc/ldpc MIPS r6 instructions.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Only check for overflow
on non-weak undefined symbols.
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Add in undefined weak overflow tests for
o32, n32 and n64.
* ld-mips-elf/undefweak-overflow.s: New test.
* ld-mips-elf/undefweak-overflow.d: New test.
* ld-mips-elf/undefweak-overflow-n32.d: New test.
* ld-mips-elf/undefweak-overflow-n64.d: New test.
Alan Modra [Tue, 2 Dec 2014 04:39:16 +0000 (15:09 +1030)]
ppc64_elf_edit_opd revamp
This patch sorts .opd relocs (see pr17666) and allows .opd sections
with a mix of 16 and 24 byte entries to be edited.
* elf64-ppc.c (OPD_NDX): Define. Use throughout for sizing/indexing
_opd_sec_data array, halving required memory.
(sort_r_offset): New function.
(ppc64_elf_edit_opd): Sort incoming relocs. Accept .opd
sections with a mix of 16 and 24 byte OPD entries. Don't
attempt to honour --non-overlapping-opd for .opd sections with
unexpected relocs. Simplify opd entry size calculations by
first finding the reloc for the next entry. Make edit loop
handle one opd entry per iteration, with an inner loop
handling relocs per entry.
Dmitriy Ivanov [Mon, 1 Dec 2014 21:37:21 +0000 (13:37 -0800)]
Add support for -z global.
gold/
* layout.cc (Layout::finish_dynamic_section): When '-z global'
is specified set DF_1_GLOBAL in DT_FLAGS_1 flags.
* options.h (General_options): New -z option (global).
Cary Coutant [Mon, 1 Dec 2014 21:21:49 +0000 (13:21 -0800)]
Fix extraneous warning about executable stack.
PR gold/17578 notes that gold will print a warning about an executable stack
when the -z execstack option is given, even when there is no --warn_execstack
option. The warning is completely useless and unexpected, since the user
explicitly requested an executable stack, and did not even ask for warnings.
This patch fixes that, and adds an extra warning when --warn_execstack
and -z noexecstack are both given and an input file requires an executable
stack.
gold/
PR gold/17578
* layout.cc (Layout::layout_gnu_stack): Don't warn when -z execstack
is given.
(Layout::create_executable_stack_info): Warn when -z noexecstack is
given but some inputs require executable stack.
Nick Clifton [Mon, 1 Dec 2014 16:43:46 +0000 (16:43 +0000)]
More fixes for memory access violations exposed by fuzzed binaries.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
Ulrich Weigand [Mon, 1 Dec 2014 12:42:41 +0000 (13:42 +0100)]
Use core regset iterators on GNU Hurd
Remove native-only core file handling on GNU Hurd. Instead, enable the
x86 target generic core regset logic on the Hurd by providing an
appropriate register offset map.
Thanks to Samuel Thibault for testing!
gdb/
* config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o.
* i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h".
(CREG_OFFSET, creg_offset, CREG_ADDR): Remove.
(supply_gregset, supply_fpregset): Remove.
* i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable.
(i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs,
and sizeof_gregset.
Nick Clifton [Mon, 1 Dec 2014 11:19:39 +0000 (11:19 +0000)]
Add checks for memory access violations exposed by fuzzed archives.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
Yao Qi [Tue, 25 Nov 2014 08:07:45 +0000 (16:07 +0800)]
Don't enable gdbtk in testsuite
When I skim configure.ac and Makefile.in in gdb/testsuite, I happen to
see that directory gdb.gdbtk is added to subdirs, however it doesn't
exist. gdb/testsuite/gdb.gdbtk was removed by the patch below,
Jan Kratochvil [Sun, 30 Nov 2014 19:25:48 +0000 (20:25 +0100)]
Add add-auto-load-scripts-directory.
There is already "add-auto-load-safe-path" which works
like "set auto-load safe-path" but in append mode.
There was missing an append equivalent for "set auto-load scripts-directory".
ABRT has directory /var/cache/abrt-di/ as an alternative one
to /usr/lib/debug/ . Therefore ABRT needs to use -iex parameters to add this
/var/cache/abrt-di/ directory as a first-class debuginfo directory.
Using absolute "set auto-load scripts-directory" would hard-code the path
possibly overriding local system directory additions; besides it would not be
nice anyway.
gdb/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Add add-auto-load-scripts-directory.
* NEWS (Changes since GDB 7.8): Add add-auto-load-scripts-directory.
* auto-load.c (add_auto_load_dir): New function.
(_initialize_auto_load): Install it.
gdb/doc/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Alan Modra [Thu, 27 Nov 2014 04:46:49 +0000 (15:16 +1030)]
Don't output symbol version definitions for non-DT_NEEDED libs
PR 16452, 16457
* elflink.c (_bfd_elf_link_find_version_dependencies): Exclude
symbols from libraries that won't be listed in DT_NEEDED.
(elf_link_output_extsym): Don't output verdefs for such symbols.
Siva Chandra [Tue, 11 Nov 2014 13:43:03 +0000 (05:43 -0800)]
Enable chained function calls in C++ expressions.
gdb/ChangeLog:
* eval.c: Include gdbthread.h.
(evaluate_subexp): Enable thread stack temporaries before
evaluating a complete expression and clean them up after the
evaluation is complete.
* gdbthread.h: Include common/vec.h.
(value_ptr): New typedef.
(VEC (value_ptr)): New vector type.
(value_vec): New typedef.
(struct thread_info): Add new fields stack_temporaries_enabled
and stack_temporaries.
(enable_thread_stack_temporaries)
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries): Declare.
* gdbtypes.c (class_or_union_p): New function.
* gdbtypes.h (class_or_union_p): Declare.
* infcall.c (call_function_by_hand): Store return values of class
type as temporaries on stack.
* thread.c (enable_thread_stack_temporaries): New function.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary): Likewise.
(value_in_thread_stack_temporaries): Likewise.
* value.c (value_force_lval): New function.
* value.h (value_force_lval): Declare.
gdb/testsuite/ChangeLog:
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
Oleg Endo [Fri, 28 Nov 2014 15:39:39 +0000 (19:39 +0400)]
Correct fabs and fneg insns in simulator
It seems that the implementation of the SH fabs and fneg insns in the
simulator is not correct. They use the FP_UNARY macro which checks the
FPSCR.PR setting and raises an exception if PR = 1 (double precision)
and the register number is not even (i.e. a valid DF reg number).
For normal unary FP insns this is fine. However, fneg and fabs perform
the same (integer) operations regardless of the FPSCR.PR setting.
This issue initially popped up here
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63260
I've checked some of the failing tests mentioned in GCC PR 63260 above
with the patch applied and the failures go away.
sim/sh/ChangeLog (tiny patch):
* gencode.c (fabs, fneg): Implement as integer operation
instead of using the FP_UNARY macro.
Pierre Muller [Fri, 28 Nov 2014 15:21:58 +0000 (19:21 +0400)]
Fix amd64 dwarf register number mapping (MMX register and higher)
Dwarf register numbers are defined in "System V Application Binary
Interface AMD64 Architecture Processor Supplement Draft Version 0.99.6"
The amd64_dwarf_regmap array is missing the 8 MMX registers in Figure
3.36: DWARF Register Number Mapping page 57. This leads to a wrong
value for the registers past this point.
gdb/ChangeLog:
Pushed by Joel Brobecker <brobecker@adacore.com>.
* amd64-tdep.c (amd64_dwarf_regmap array): Add missing MMX
registers.
Ulrich Weigand [Fri, 28 Nov 2014 14:53:05 +0000 (15:53 +0100)]
Remove (dead-code) native core file sniffers on Linux targets
Since Andreas Arnez' recent patch series, all Linux targets install
gdbarch_iterate_over_regset_sections routines. This means that on
Linux native targets, old-style core sniffers are never used.
Most Linux targets haven't been using such sniffers for a long time
anyway, but a couple remain: ia64 and sparc use core-regset.o, and
m68k installs its own core_fns. All this is now dead code, which
this commit removes.
Joel Brobecker [Fri, 28 Nov 2014 14:37:08 +0000 (18:37 +0400)]
gdb_realpath: Rework comment about handling on Windows.
Rework the comment to explain why we're still relying on GetFullPathName
even though gnulib ensures that canonicalize_file_name is now available
on all platforms, including Windows.
gdb/ChangeLog:
* utils.c (gdb_realpath): Rework comment about handling on
Windows.
Yao Qi [Tue, 4 Nov 2014 14:17:02 +0000 (22:17 +0800)]
Use readlink unconditionally
Since readlink module is imported, we can use it unconditionally.
This patch is to remove configure checks and HAVE_READLINK checks in
code. It was mentioned in the patch below
[RFA/commit] gdbserver: return ENOSYS if readlink not supported.
https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html
to use readlink in gdbserver, but we chose something simple at that
moment.
Yao Qi [Fri, 28 Nov 2014 03:21:48 +0000 (11:21 +0800)]
Match library name prefixed with sysroot
We enable systemtap probe in glibc recently, and see the following gdb fail,
(gdb) set solib-absolute-prefix /.
...
Stopped due to shared library event:^M
Inferior loaded /./foo/bar/gdb.base/break-probes-solib.so
...
(gdb) FAIL: gdb.base/break-probes.exp: run til our library loads (the program exited)
$binfile_lib is /foo/bar/gdb.base/break-probes-solib.so, but the
sysroot is prefixed in solib.c:solib_find, as comments described:
Global variable GDB_SYSROOT is used as a prefix directory
to search for shared libraries if they have an absolute path.
so the output becomes "/./foo/bar/gdb.base/break-probes-solib.so", which
is still correct. However, the test repeatedly continue the program
and tries to match $binfile_lib, finally, the program exits and the
test fails.
This patch is to adjust the pattern to match $sysroot$binfile_lib
instead of $binfile_lib.
gdb/testsuite:
2014-11-28 Yao Qi <yao@codesourcery.com>
* gdb.base/break-probes.exp: Match library name prefixed with
sysroot.
Espen Grindhaug [Thu, 27 Nov 2014 15:49:23 +0000 (15:49 +0000)]
Fixes an infinite loop in readelf parsing a corrupt binary, and other minor corrections.
PR binutils/17531
* readelf.c (get_data): Move excessive length check to earlier on
in the function and allow for wraparound in the arithmetic.
(get_32bit_elf_symbols): Terminate early if the section size is
zero. Check for an invalid sh_entsize. Check for an index
section with an invalid size.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Check for an invalid sh_entsize.
I noticed that it passed when using Python 3, even though it should fail
because of the missing parentheses for the call print.
There needs to be more escaping of the square brackets. Currently, it is
interpreted as "any one character from this big list of characters,
followed by .*". When adding the required amount of backslashes, the
test starts failing as it should.
Moreover, both in Python 2.7 and Python 3.3 the numbers don't have the L
suffix, so now the test fails because of that. Anybody knows why they
were there in the first place? I just tested with Python 2.4 and there
are no Ls.
gdb/testsuite/ChangeLog:
* gdb.python/py-linetable.exp: Escape properly sorted(fset)
test expected output. Add parentheses for the call to print.
Remove L suffix from integers.
Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
Nick Clifton [Thu, 27 Nov 2014 12:19:10 +0000 (12:19 +0000)]
Fixes a few more memory access violations exposed by fuzzed binaries.
PR binutils/17512
* ecoff.c (_bfd_ecoff_slurp_symbol_table): Warn about and correct
a discrepancy between the isymMax and ifdMax values in the
symbolic header.
* elf.c (_bfd_elf_print_private_bfd_data): Fix the range check
scanning the external dynamic entries.
Cary Coutant [Wed, 26 Nov 2014 22:41:46 +0000 (14:41 -0800)]
Update list of debug sections for --strip-debug-xxx options.
Add .debug_gdb_scripts, .debug_gnu_pubnames, .debug_gnu_pubtypes,
and .debug_str_offsets to lists of sections to strip or keep
when stripping debug info.
gold/
* layout.cc (gdb_sections): Keep .debug_gdb_scripts and
.debug_str_offsets; strip .debug_gnu_pubnames and
.debug_gnu_pubtypes.
(lines_only_debug_sections): Strip all four new sections.
Nick Clifton [Wed, 26 Nov 2014 14:11:23 +0000 (14:11 +0000)]
More fixes for memory access errors triggered by attemps to examine corrupted binaries.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
Alan Modra [Wed, 19 Nov 2014 08:40:49 +0000 (19:10 +1030)]
_bfd_elf_slurp_version_tables tidy
The internal verref buffer is allocated with bfd_zalloc, based on a
count given in headers. If the headers are broken/fuzzed and contain
an enormous count the alloc can result in OOM. If we first read the
external verrefs (into a buffer that isn't zeroed on allocation) then
the read provides a sanity check on the headers.
Also prints an error for version info that fails other sanity checks.
* elf.c (_bfd_elf_slurp_version_tables): Delay allocation of
internal verref buffer. Error for zero sh_info. Print errors.
Check for zero vd_ndx. Use bfd_zalloc for vd_auxptr buffer.
Alan Modra [Wed, 26 Nov 2014 00:40:29 +0000 (11:10 +1030)]
Retry powerpc gold stub grouping when groups prove too large
An unusually large number of stubs can result in the default section
group size being too large; sections plus stubs exceed the range of a
branch. Restarting the relaxation pass with a smaller group size can
sometimes help.
* powerpc.cc (struct Stub_table_owner): New.
(Powerpc_relobj): Rename stub_table_ to stub_table_index_, an
unsigned int vector. Update all references.
(powerpc_relobj::set_stub_table): Take an unsigned int param
rather than a Stub_table. Update callers.
(Powerpc_relobj::clear_stub_table): New function.
(Target_powerpc): Add relax_failed_, relax_fail_count_ and
stub_group_size_ vars.
(Target_powerpc::new_stub_table): Delete.
(max_branch_delta): New function, extracted from..
(Target_powerpc::Relocate::relocate): ..here..
(Target_powerpc::Branch_info::make_stub): ..and here. Return
status on whether stub created successfully.
(Stub_control::Stub_control): Add "no_size_errors" param. Move
default sizing to..
(Target_powerpc::do_relax): ..here. Init stub_group_size_ and
reduce on relax failure.
(Target_powerpc::group_sections): Add "no_size_errors" param.
Use stub_group_size_. Set up group info in a temp vector,
before building Stub_table vector. Account for input sections
possibly already converted to relaxed sections.
(Stub_table::init): Delete. Merge into..
(Stub_table::Stub_table): ..here.
(Stub_table::can_reach_stub): New function.
(Stub_table::add_plt_call_entry): Add "from" parameter and
return true iff stub could be reached.
(Stub_table::add_long_branch_entry): Similarly. Add "r_type"
param too.
(Stub_table::clear_stubs): Add "all" param.
gdb/
* nios2-tdep.c (nios2_analyze_prologue): Replace restriction
that there can be only one stack adjustment in the prologue
with tests to detect specific disallowed stack adjustments.
gdb/
* nios2-tdep.c (nios2_fetch_insn): Move up in file. Disassemble
the instruction as well as reading it from memory.
(nios2_match_add): New.
(nios2_match_sub): New.
(nios2_match_addi): New.
(nios2_match_orhi): New.
(nios2_match_stw): New.
(nios2_match_ldw): New.
(nios2_match_rdctl): New.
(enum branch_condition): New.
(nios2_match_branch): New.
(nios2_match_jmpi): New.
(nios2_match_calli): New.
(nios2_match_jmpr): New.
(nios2_match_callr): New.
(nios2_match_break): New.
(nios2_match_trap): New.
(nios2_in_epilogue_p): Rewrite to use new functions.
(nios2_analyze_prologue): Likewise.
(nios2_skip_prologue): Delete unused local limit_pc.
(nios2_breakpoint_from_pc): Make R1-specific encodings explicit.
(nios2_get_next_pc): Rewrite to use new functions.
Alan Modra [Tue, 25 Nov 2014 23:36:07 +0000 (10:06 +1030)]
[GOLD] PowerPC relaxation corner case
It's possible for the section grouping code to decide that the last
section looked at (the first section by address) doesn't fit into a
group. In one case that section is already a group owner and that is
handled correctly. In other cases the section should be put into its
own group. Like this:
* powerpc.cc (Stub_control::set_output_and_owner): New function.
(Target_powerpc::group_sections): Use it.
Cary Coutant [Tue, 25 Nov 2014 21:55:42 +0000 (13:55 -0800)]
Fix corrupted .eh_frame section with LTO and --gc-sections.
When --gc-sections is turned on during an LTO link, the .eh_frame sections
from deferred files are processed before those from the replacement files.
As a result, the section end-cap from crtendS.o is placed ahead of
the .eh_frame data from the replacement files. This patch fixes the bug
by skipping the layout of the deferred sections during GC pass 2.
gold/
PR gold/17639
* object.cc (Sized_relobj_file): Initialize is_deferred_layout_.
(Sized_relobj_file::do_layout): Handle deferred sections properly
during GC pass 1. Don't add reloc sections to deferred list twice.
* object.h (Sized_relobj_file::is_deferred_layout): New function.
(Sized_relobj_file::is_deferred_layout_): New data member.
Max Filippov [Tue, 25 Nov 2014 18:33:21 +0000 (21:33 +0300)]
Fix trampolines search code for conditional branches
For conditional branches that need more than one trampoline to reach its
target assembler couldn't always find suitable trampoline because
post-loop condition check was placed inside the loop, resulting in
premature loop termination. Move check outside the loop.
This fixes the following build errors seen when assembling huge files
produced by gcc:
Error: jump target out of range; no usable trampoline found
Error: operand 1 of 'j' has out of range value '307307'
H.J. Lu [Tue, 25 Nov 2014 14:47:44 +0000 (06:47 -0800)]
Display symbol version when dumping dynrelocs
Both readelf/objdump know how to get symbol version string for dynamic
symbols. This patch extracts this functionality into a separate
function and uses it to add symbol version string to versioned symbol
names when dumping dynamic relocations.
bfd/
PR binutils/16496
* elf-bfd.h (bfd_elf_get_symbol_version_string): New.
* elf.c (bfd_elf_get_symbol_version_string): New. Extracted
from bfd_elf_print_symbol.
(bfd_elf_print_symbol): Use it.
binutils/
PR binutils/16496
* objdump.c (objdump_print_symname): Call
bfd_elf_get_symbol_version_string to get ELF symbol version
string. Append version string if needed.
* readelf.c (versioned_symbol_info): New enum.
(get_symbol_version_string): New. Extracted from
process_symbol_table.
(dump_relocations): Add a new argument to indicate if dynamic
symbol table is used. Use get_symbol_version_string to get
symbol version string for dynamic symbol. Append version string
if needed.
(process_relocs): Updated dump_relocations call.
(process_symbol_table): Use get_symbol_version_string.
ld/testsuite/
PR binutils/16496
* ld-cris/weakref3.d: Add symbol version string to versioned
symbol names in dynamic relocation.
* ld-cris/weakref4.d: Likewise.
* ld-elfvers/vers24.rd: Likewise.
H.J. Lu [Tue, 25 Nov 2014 13:05:39 +0000 (05:05 -0800)]
Optimize out i386/x86-64 JUMP_SLOT relocation
When there are both PLT and GOT references to the same function symbol,
linker will create a GOTPLT slot for PLT entry and a GOT slot for GOT
reference. A run-time JUMP_SLOT relocation is created to update the
GOTPLT slot and a run-time GLOB_DAT relocation is created to update the
GOT slot. Both JUMP_SLOT and GLOB_DAT relocations will apply the same
symbol value to GOTPLT and GOT slots, respectively, at run-time.
This optimization combines GOTPLT and GOT slots into a single GOT slot
and removes the run-time JUMP_SLOT relocation. It replaces the regular
PLT entry:
indirect jump [GOTPLT slot]
push relocation index
jump PLT0
with an GOT PLT entry with an indirect jump via the GOT slot:
indirect jump [GOT slot]
nop
and resolves PLT reference to the GOT PLT entry.
We must avoid this optimization if pointer equality is needed since
we don't clear symbol value in this case and the dynamic linker won't
update the GOT slot. Otherwise, the resulting binary will get into an
infinite loop at run-time.
bfd/
* elf32-i386.c (elf_i386_got_plt_entry): New.
(elf_i386_pic_got_plt_entry): Likewise.
(elf_i386_link_hash_entry): Add plt_got.
(elf_i386_link_hash_table): Likewise.
(elf_i386_link_hash_newfunc): Initialize plt_got.offset to -1.
(elf_i386_get_local_sym_hash): Likewise.
(elf_i386_check_relocs): Create the GOT PLT if there are both
PLT and GOT references when the regular PLT is used.
(elf_i386_allocate_dynrelocs): Use the GOT PLT if there are
both PLT and GOT references unless pointer equality is needed.
(elf_i386_relocate_section): Also check the GOT PLT when
resolving R_386_PLT32.
(elf_i386_finish_dynamic_symbol): Use the GOT PLT if it is
available.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add plt_got.
(elf_x86_64_link_hash_table): Likewise.
(elf_x86_64_link_hash_newfunc): Initialize plt_got.offset to -1.
(elf_x86_64_get_local_sym_hash): Likewise.
(elf_x86_64_check_relocs): Create the GOT PLT if there are both
PLT and GOT references when the regular PLT is used.
(elf_x86_64_allocate_dynrelocs): Use the GOT PLT if there are
both PLT and GOT references unless pointer equality is needed.
(elf_x86_64_relocate_section): Also check the GOT PLT when
resolving R_X86_64_PLT32.
(elf_x86_64_finish_dynamic_symbol): Use the GOT PLT if it is
available.
Samuel Thibault [Sun, 23 Nov 2014 15:19:46 +0000 (16:19 +0100)]
[Hurd] Fix deallocation after proc_getprocinfo call
2014-11-24 Samuel Thibault <samuel.thibault@ens-lyon.org>
* gdb/gnu-nat.c (inf_validate_procinfo): Multiply the number of
elements pi_len by the size of the elements before calling
vm_deallocate.
(inf_validate_task_sc): Likewise, and properly deallocate the
noise array.
Doug Evans [Mon, 24 Nov 2014 04:30:34 +0000 (20:30 -0800)]
Fix dumping of function arguments.
gdb/ChangeLog:
* gdbtypes.c (print_args): Renamed from print_arg_types. Print arg
number and name if present. All callers updated.
(dump_fn_fieldlists): Fix indentation of args.
Alan Modra [Mon, 24 Nov 2014 02:11:33 +0000 (12:41 +1030)]
PowerPC64 --plt-align
Alignment of plt stubs was broken, firstly because the option was
being dropped due to the alignment value not being set in the "params"
struct used in elf64-ppc.c, and secondly due to not calculating the
number of alignment boundary crossings correctly.
bfd/
* elf64-ppc.c (plt_stub_pad): Correct.
ld/
* ld.texinfo: Correct --plt-align documentation.
* emultempl/ppc64elf.em (plt_stub_align): Delete. Use and set
params.plt_stub_align instead.
H.J. Lu [Sun, 23 Nov 2014 13:54:02 +0000 (05:54 -0800)]
Assert size of elf_x86_64_{bnd|legacy}_plt2_entry
Assert size of elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry
only in elf_x86_64_check_relocs.
* elf64-x86-64.c (elf_x86_64_check_relocs): Assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
(elf_x86_64_allocate_dynrelocs): Don't assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
... broke function calls on sparc-elf when running over QEMU. Any
function call should demonstrate the problem.
For instance, seen from the debugger:
(gdb) call pn(1234)
[Inferior 1 (Remote target) exited normally]
The program being debugged exited while in a function called from GDB.
Evaluation of the expression containing the function
And seen from QEMU:
qemu: fatal: Trap 0x02 while interrupts disabled, Error state
[register dump removed]
What happens in this case is that GDB sets the inferior function call
by not only creating the dummy frame, but also writing a breakpoint
instruction at the return address for our function call. See infcall.c:
/* Write a legitimate instruction at the point where the infcall
breakpoint is going to be inserted. While this instruction
is never going to be executed, a user investigating the
memory from GDB would see this instruction instead of random
uninitialized bytes. We chose the breakpoint instruction
as it may look as the most logical one to the user and also
valgrind 3.7.0 needs it for proper vgdb inferior calls.
If software breakpoints are unsupported for this target we
leave the user visible memory content uninitialized. */
This instruction triggers a change introduced by the commit above,
where we consider bp locations as being permanent breakpoints
if there is already a breakpoint instruction at that address:
As a result, when resuming the program's execution for the inferior
function call, GDB decides that it does not need to insert a breakpoint
at this address, expecting the target to just report a SIGTRAP when
trying to execute that instruction.
But unfortunately for us, at least some versions of QEMU for SPARC
just terminate the execution entirely instead of reporting a breakpoint,
thus producing the behavior reported here.
Although it appears like QEMU might be misbehaving and should therefore
be fixed (to be verified) from the user's point of view, the recent
change does introduce a regression. So this patch tries to mitigate
a bit the damage by handling such infcall breakpoints as special and
making sure that they are never considered permanent, thus restoring
the previous behavior specifically for those breakpoints.
The option of not writing the breakpoint instructions in the first
place was considered, and would probably work also. But the comment
associated to it seems to indicate that there is still reason to
keep it.
gdb/ChangeLog:
* breakpoint.c (bp_loc_is_permanent): Return 0 if LOC corresponds
to a bp_call_dummy breakpoint type.
Tested on x86_64-linux. Also testing on sparc-elf/QEMU using
AdaCore's testsuite.
projects / thirdparty / binutils-gdb.git / log
