H.J. Lu [Sat, 5 Dec 2020 02:54:47 +0000 (18:54 -0800)]
x86-64: Convert load to mov only for GOTPCRELX relocations
Since converting load to mov needs to rewrite the REX byte and we don't
know if there is a REX byte with GOTPCREL relocation, do it only for
GOTPCRELX relocations.
bfd/
PR ld/27016
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Convert load
to mov only for GOTPCRELX relocations.
ld/
PR ld/27016
* testsuite/ld-x86-64/x86-64.exp: Run pr27016a and pr27016b.
* testsuite/ld-x86-64/pr27016a.d: New file.
* testsuite/ld-x86-64/pr27016a.s: Likewise.
* testsuite/ld-x86-64/pr27016b.d: Likewise.
* testsuite/ld-x86-64/pr27016b.s: Likewise.
Alan Modra [Tue, 17 Nov 2020 04:43:37 +0000 (15:13 +1030)]
[GOLD] powerpc incremental-dump assertion failure
incremental-dump wants to instantiate Target_powerpc without options
being set up. This patch fixes
internal error in options, at gold/parameters.h:92
* powerpc.cc (Target_powerpc::no_tprel_opt_): Rename from tprel_opt_.
Init to false.
(Target_powerpc::tprel_opt): Test parameters->options().tls_optimize().
(Target_powerpc::set_tprel_opt): Delete.
(Target_powerpc::set_no_tprel_opt): New function. Update all uses
of set_tprel_opt.
H.J. Lu [Thu, 29 Oct 2020 16:19:25 +0000 (09:19 -0700)]
dwarf: Also match abbrev base when searching abbrev list
A .debug_abbrev section can have multiple CUs. When caching abbrev list,
we need to check abbrev base to support multiple CUs.
PR binutils/26808
* dwarf.c (abbrev_list): Add abbrev_base.
(new_abbrev_list): Add an abbrev_base argument and record it.
(find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument
and match it.
(process_debug_info): Pass abbrev_base to new_abbrev_list and
find_abbrev_list_by_abbrev_offset.
(display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list
and find_abbrev_list_by_abbrev_offset.
* testsuite/binutils-all/x86-64/pr26808.dump: New file.
* testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808
test.
Nick Clifton [Tue, 27 Oct 2020 16:17:13 +0000 (16:17 +0000)]
Fix the decoding of DW_FORM_ref_addr DWARF attribute.
* dwarf.c (struct abbrev_list): New structure. Used to collect
lists of abbreviation sets.
(struct abbrev_map): New structure. Used to map CU offsets to
abbreviation offsets.
(record_abbrev_list): New function. A new entry to an
abbreviation list.
(free_all_abbrevs): Update to free abbreviation lists.
(new_abbrev_list): New function. Start a new abbreviation
list.
(find_abbrev_list_by_abbrev_offset): New function.
(find_abbrev_map_by_offset): New function.
(add_abbrev): Add abbrev_list parameter.
(add_abbrev_attr): Likewise.
(process_abbrev_section): Rename to process_abbrev_set and add
list parameter.
(get_type_abbrev_from_form): New function. Attempts to decode the
forms used by DW_AT_type attributes.
(get_type_signedness): Display type names if operating in wide
mode. Use get_type_abbrev_from_form.
(read_and_display_attr_value): Use get_type_abbrev_from_form.
(process_debug_info): Pre-parse the CU headers to collate all the
abbrevs before starting the main scan.
(process_debug_abbrev): Do not free any loaded abbrevs.
(free_debug_memory): Free the abbrev maps.
Nick Clifton [Wed, 21 Oct 2020 16:42:42 +0000 (17:42 +0100)]
Work around problem in DWARF decoding library which can result in attempts to read arbitrary bytes as if they were an LEB128 encoded value.
* dwarf.c (skip_attr_bytes): Accept DWARF versions higher than 4
when processing the DW_FORM_ref_addr form.
Skip bytes in DW_FORM_block and DW_FORM_exprloc forms.
Handle DW_FORM_indirect.
(get_type_signedness): Allow a limited amount of recursion.
Do not attempt to decode types that use the DW_FORM_ref_addr form.
(read_and_display_attr_value): Do not attempt to decode types
that use the DW_FORM_ref_addr form.
H.J. Lu [Fri, 16 Oct 2020 11:03:20 +0000 (04:03 -0700)]
gas: Reuse the input file entry in the file table
Some instructions can be emitted (dwarf2_emit_insn is called) before the
first .file <NUMBER> directive has been seen, which allocates the input
file as the first file entry. Reuse the input file entry in the file
table.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (file_entry): Remove auto_assigned.
(assign_file_to_slot): Remove the auto_assign argument.
(allocate_filenum): Updated.
(allocate_filename_to_slot): Reuse the input file entry in the
file table.
(dwarf2_where): Replace as_where with as_where_physical.
* testsuite/gas/i386/dwarf5-line-1.d: New file.
* testsuite/gas/i386/dwarf5-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-1.
gas: Always use as_where for preprocessed assembly codes
Always clear the slot 1 if it was assigned to the input file before the
first .file <NUMBER> directive has been seen. Always use as_where to
generate the correct debug infor for preprocessed assembly codes.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (allocate_filename_to_slot): Don't reuse the slot 1
here.
(dwarf2_where): Restore as_where.
(dwarf2_directive_filename): Clear the slot 1 if it was assigned
to the input file.
* testsuite/gas/i386/dwarf5-line-2.d: New file.
* testsuite/gas/i386/dwarf5-line-2.s: Likewise.
* testsuite/gas/i386/dwarf5-line-3.d: Likewise.
* testsuite/gas/i386/dwarf5-line-3.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-2 and
dwarf5-line-3.
Since a file slot is auto-assigned for the #APP marker appeared before
the first .file <NUMBER> directive has been seen, clear all auto-assigned
file slots when seeing the first .file <NUMBER> directive.
PR gas/26778
* * dwarf2dbg.c (num_of_auto_assigned): New.
(allocate_filenum): Increment num_of_auto_assigned.
(dwarf2_directive_filename): Clear the slots auto-assigned
before the first .file <NUMBER> directive was seen.
* testsuite/gas/i386/dwarf4-line-1.d: New file.
* testsuite/gas/i386/dwarf4-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf4-line-1.
Mark Wielaard [Mon, 28 Sep 2020 22:02:06 +0000 (00:02 +0200)]
binutils: dwarf.c handle DWARF5 DW_LLE_start_end and DW_LLE_start_length.
display_loclists_list only handled DW_LLE_offset_pair as bounded
location description. Also handle DW_LLE_start_end and DW_LLE_start_lenght.
These don't use the base_address.
binutils/ChangeLog:
* dwarf.c (display_loclists_list): Handle DW_LLE_start_end and
DW_LLE_start_length. Only add base_address for DW_LLE_offset_pair.
Mark Wielaard [Wed, 23 Sep 2020 14:41:06 +0000 (16:41 +0200)]
Sync libiberty and include with GCC for get_DW_UT_name.
This adds a get_DW_UT_name function to dwarfnames using dwarf2.def
for use in binutils readelf to show the unit types in a DWARF5 header.
include/ChangeLog:
Sync with GCC
* dwarf2.def: Add DWARF5 Unit type header encoding macros
DW_UT_FIRST, DW_UT and DW_UT_END.
* dwarf2.h (enum dwarf_unit_type): Removed and define using
DW_UT_FIRST, DW_UT and DW_UT_END macros.
(get_DW_UT_name): New function declaration.
libiberty/ChangeLog:
Sync with GCC
* dwarfnames.c (get_DW_UT_name): Define using DW_UT_FIRST, DW_UT
and DW_UT_END.
Mark Wielaard [Wed, 23 Sep 2020 14:31:14 +0000 (16:31 +0200)]
binutils: Handle DWARF5 DW_FORM_ref_addr and DW_UT_partial.
dwz in DWARF5 mode might produce DW_UT_partial unit types, which are
the same as DW_UT_compile unit types (but start with a DW_TAG_partial_unit)
and it might produce DW_FORM_ref_addr to create a reference between
units. Accept both constructs.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_FORM_ref_addr
for dwarf_version 5 just as version 3 and 4 (only 2 is different).
(process_debug_info): Allow DW_UT_partial.
H.J. Lu [Mon, 16 Nov 2020 14:37:53 +0000 (06:37 -0800)]
elf: Set rel_from_abs to 1 for __ehdr_start
bfdlink.h has
/* Symbol will be converted from absolute to section-relative. Set for
symbols defined by a script from "dot" (also SEGMENT_START or ORIGIN)
outside of an output section statement. */
unsigned int rel_from_abs : 1;
linker.c has
.{* Return TRUE if the symbol described by a linker hash entry H
. is going to be absolute. Linker-script defined symbols can be
. converted from absolute to section-relative ones late in the
. link. Use this macro to correctly determine whether the symbol
. will actually end up absolute in output. *}
.#define bfd_is_abs_symbol(H) \
. (((H)->type == bfd_link_hash_defined \
. || (H)->type == bfd_link_hash_defweak) \
. && bfd_is_abs_section ((H)->u.def.section) \
. && !(H)->rel_from_abs)
.
Set rel_from_abs to 1 for __ehdr_start which will be converted from
absolute to section-relative in assign_file_positions_for_load_sections.
PR ld/26869
* ldelf.c (ldelf_before_allocation): Set rel_from_abs to 1 for
__ehdr_start.
* testsuite/ld-i386/i386.exp: Run pr26869.
* testsuite/ld-i386/pr26869.d: New file.
* testsuite/ld-i386/pr26869.s: Likewise.
arm: Fix the wrong error message string for mve vldr/vstr (PR26763).
For mve vldr/vstr instructions assembler is throwing wrong error message.
Instead of 'Error: syntax error' assembler fails with 'Error: lo register required'.
This patch fixes the issue.
eg:
$ cat x.s
.syntax unified
.thumb
vldrb.s16 q0, r0
Before this patch:
$ arm-none-eabi-as x.s -march=armv8.1-m.main+mve -mfloat-abi=hard
x.s: Assembler messages:
x.s:4: Error: lo register required -- `vldrb.s16 q0,r0'
After this patch:
$ arm-none-eabi-as x.s -march=armv8.1-m.main+mve -mfloat-abi=hard
x.s: Assembler messages:
x.s:4: Error: syntax error -- `vldrb.s16 q0,r0'
projects / thirdparty / binutils-gdb.git / log
