Li Nan [Mon, 3 Nov 2025 12:57:55 +0000 (20:57 +0800)]
md/raid0: Move queue limit setup before r0conf initialization
Prepare for making logical blocksize configurable. This change has no
impact until logical block size becomes configurable.
Move raid0_set_limits() before create_strip_zones(). It is safe as fields
modified in create_strip_zones() do not involve mddev configuration, and
rdev modifications there are not used in raid0_set_limits().
'blksize' in create_strip_zones() fetches mddev's logical block size,
which is already the maximum aross all rdevs, so the later max() can be
removed.
Li Nan [Mon, 3 Nov 2025 12:57:54 +0000 (20:57 +0800)]
md: init bioset in mddev_init
IO operations may be needed before md_run(), such as updating metadata
after writing sysfs. Without bioset, this triggers a NULL pointer
dereference as below:
Li Nan [Mon, 3 Nov 2025 12:57:53 +0000 (20:57 +0800)]
md: delete md_redundancy_group when array is becoming inactive
'md_redundancy_group' are created in md_run() and deleted in del_gendisk(),
but these are not paired. Writing inactive/active to sysfs array_state can
trigger md_run() multiple times without del_gendisk(), leading to
duplicate creation as below:
Creation of it depends on 'pers', its lifecycle cannot be aligned with
gendisk. So fix this issue by triggering 'md_redundancy_group' deletion
when the array is becoming inactive.
Li Nan [Thu, 18 Sep 2025 11:57:58 +0000 (19:57 +0800)]
md: prevent adding disks with larger logical_block_size to active arrays
When adding a disk to a md array, avoid updating the array's
logical_block_size to match the new disk. This prevents accidental
partition table loss that renders the array unusable.
The later patch will introduce a way to configure the array's
logical_block_size.
Huiwen He [Sun, 2 Nov 2025 15:25:40 +0000 (23:25 +0800)]
md/raid5: remove redundant __GFP_NOWARN
The __GFP_NOWARN flag was included in GFP_NOWAIT since commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT"). So
remove the redundant __GFP_NOWARN flag.
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition.
Link: https://lore.kernel.org/linux-raid/20251029063419.21700-1-xni@redhat.com Fixes: 9e59d609763f ("md: call del_gendisk in control path") Signed-off-by: Xiao Ni <xni@redhat.com> Suggested-by: Yu Kuai <yukuai@fnnas.com> Reviewed-by: Li Nan <linan122@huawei.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
John Garry [Wed, 3 Sep 2025 16:10:52 +0000 (16:10 +0000)]
md/md-linear: Enable atomic writes
All the infrastructure has already been plumbed to support this for
stacked devices, so just enable the request_queue limits features flag.
A note about chunk sectors for linear arrays:
While it is possible to set a chunk sectors param for building a linear
array, this is for specifying the granularity at which data sectors from
the device are used. It is not the same as a stripe size, like for RAID0.
As such, it is not appropriate to set chunk_sectors request queue limit to
the same value, as chunk_sectors request limit is a boundary for which
requests cannot straddle.
However, request_queue limit max_hw_sectors is set to chunk sectors, which
almost has the same effect as setting chunk_sectors limit.
Yun Zhou [Wed, 15 Oct 2025 08:32:27 +0000 (16:32 +0800)]
md: fix rcu protection in md_wakeup_thread
We attempted to use RCU to protect the pointer 'thread', but directly
passed the value when calling md_wakeup_thread(). This means that the
RCU pointer has been acquired before rcu_read_lock(), which renders
rcu_read_lock() ineffective and could lead to a use-after-free.
Xiao Ni [Sun, 28 Sep 2025 01:24:24 +0000 (09:24 +0800)]
md: delete mddev kobj before deleting gendisk kobj
In sync del gendisk path, it deletes gendisk first and the directory
/sys/block/md is removed. Then it releases mddev kobj in a delayed work.
If we enable debug log in sysfs_remove_group, we can see the debug log
'sysfs group bitmap not found for kobject md'. It's the reason that the
parent kobj has been deleted, so it can't find parent directory.
In creating path, it allocs gendisk first, then adds mddev kobj. So it
should delete mddev kobj before deleting gendisk.
Before commit 9e59d609763f ("md: call del_gendisk in control path"), it
releases mddev kobj first. If the kobj hasn't been deleted, it does clean
job and deletes the kobj. Then it calls del_gendisk and releases gendisk
kobj. So it doesn't need to call kobject_del to delete mddev kobj. After
this patch, in sync del gendisk path, the sequence changes. So it needs
to call kobject_del to delete mddev kobj.
After this patch, the sequence is:
1. kobject del mddev kobj
2. del_gendisk deletes gendisk kobj
3. mddev_delayed_delete releases mddev kobj
4. md_kobj_release releases gendisk kobj
Damien Le Moal [Fri, 7 Nov 2025 06:38:44 +0000 (15:38 +0900)]
block: introduce bdev_zone_start()
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Fri, 7 Nov 2025 06:38:43 +0000 (15:38 +0900)]
block: refactor disk_zone_wplug_sync_wp_offset()
The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Fri, 7 Nov 2025 06:38:42 +0000 (15:38 +0900)]
block: improve blk_zone_wp_offset()
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: don't return 1 for the fallback case in blkdev_get_zone_info
blkdev_do_report_zones returns the number of reported zones, but
blkdev_get_zone_info returns 0 or an errno. Translate to the expected
return value in blkdev_report_zone_fallback.
Fixes: b037d41762fd ("block: introduce blkdev_get_zone_info()") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 14 Oct 2025 15:04:56 +0000 (08:04 -0700)]
nvme: remove virtual boundary for sgl capable devices
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.
Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 14 Oct 2025 15:04:55 +0000 (08:04 -0700)]
block: accumulate memory segment gaps per bio
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cong Zhang [Tue, 21 Oct 2025 11:07:56 +0000 (19:07 +0800)]
virtio_blk: NULL out vqs to avoid double free on failed resume
The vblk->vqs releases during freeze. If resume fails before vblk->vqs
is allocated, later freeze/remove may attempt to free vqs again.
Set vblk->vqs to NULL after freeing to avoid double free.
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:47 +0000 (17:54 -0800)]
null_blk: allow byte aligned memory offsets
Allowing byte aligned memory provides a nice testing ground for
direct-io.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:46 +0000 (17:54 -0800)]
null_blk: single kmap per bio segment
Rather than kmap the the request bio segment for each sector, do
the mapping just once.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:45 +0000 (17:54 -0800)]
null_blk: consistently use blk_status_t
No need to mix errno and blk_status_t error types. Just use the standard
block layer type.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 6 Nov 2025 01:54:44 +0000 (17:54 -0800)]
null_blk: simplify copy_from_nullb
It always returns success, so the code that saves the errors status, but
proceeds without checking it looks a bit odd. Clean this up.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_advance_io_iter() and ublk_copy_io_pages() currently open-code the
iteration over the request's bvecs. Switch to the rq_for_each_segment()
macro provided by blk-mq to avoid reaching into the bio internals and
simplify the code.
Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_copy_user_pages()/ublk_copy_io_pages() currently uses
iov_iter_get_pages2() to extract the pages from the iov_iter and
memcpy()s between the bvec_iter and the iov_iter's pages one at a time.
Switch to using copy_to_iter()/copy_from_iter() instead. This avoids the
user page reference count increments and decrements and needing to split
the memcpy() at user page boundaries. It also simplifies the code
considerably.
Ming reports a 40% throughput improvement when issuing I/O to the
selftests null ublk server with zero-copy disabled.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: fix cached zone reporting after zone append was used
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4ab7 ("block: introduce blkdev_report_zones_cached()") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: don't leak disk->zones_cond for !disk_need_zone_resources
disk->zones_cond is allocated for all zoned devices, but
disk_free_zone_resources skips it when the zone write plug hash is not
allocated, leaking the allocation for non-mq devices that don't emulate
zone append. This is reported by kmemleak-enabled xfstests for various
tests that use simple device mapper targets.
Fix this by moving all code that requires writes plugs from
disk_free_zone_resources into disk_destroy_zone_wplugs_hash_table
and executing the rest of the code, including the disk->zones_cond
freeing unconditionally.
Fixes: 6e945ffb6555 ("block: use zone condition to determine conventional zones") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 5 Nov 2025 15:07:41 +0000 (08:07 -0700)]
Merge branch 'cached-zones' into for-6.19/block
This patch series implements a cached report zones using information
from the block layer zone write plugs and a new zone condition tracking.
This avoids having to execute slow report zones commands on the device
when for instance mounting file systems, which can significantly speed
things up, especially in setups with multiple SMR HDDs (e.g. a BTRFS
RAID volume).
The first patch improves handling of zone management commands. Patch 2
fixes zone resource updates and the following 3 patches cleanup the zone
code in preparation for introducing cached zone report support.
From patch 6 to 13, cached report zones is implemented and made
available to users with a new ioctl() command.
Finally, patches 14 and 15 introduce the use of cached report zones in
the mount operation of XFS and BTRFS.
Link: https://lore.kernel.org/linux-block/20251104212249.1075412-1-dlemoal@kernel.org/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* cached-zones:
xfs: use blkdev_report_zones_cached()
btrfs: use blkdev_report_zones_cached()
block: add zone write plug condition to debugfs zone_wplugs
block: improve zone_wplugs debugfs attribute output
block: introduce BLKREPORTZONESV2 ioctl
block: introduce blkdev_report_zones_cached()
block: introduce blkdev_get_zone_info()
block: refactor blkdev_report_zones() code
block: track zone conditions
block: use zone condition to determine conventional zones
block: reorganize struct blk_zone_wplug
block: introduce disk_report_zone()
block: cleanup blkdev_report_zones()
block: freeze queue when updating zone resources
block: handle zone management operations completions
Damien Le Moal [Tue, 4 Nov 2025 21:22:49 +0000 (06:22 +0900)]
xfs: use blkdev_report_zones_cached()
Modify xfs_mount_zones() to replace the call to blkdev_report_zones()
with blkdev_report_zones_cached() to speed-up mount operations.
Since this causes xfs_zone_validate_seq() to see zones with the
BLK_ZONE_COND_ACTIVE condition, this function is also modified to acept
this condition as valid.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 2s compared to over 4.7s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:48 +0000 (06:22 +0900)]
btrfs: use blkdev_report_zones_cached()
Modify btrfs_get_dev_zones() and btrfs_sb_log_location_bdev() to replace
the call to blkdev_report_zones() with blkdev_report_zones_cached() to
speed-up mount operations. btrfs_get_dev_zone_info() is also modified to
take into account the BLK_ZONE_COND_ACTIVE condition, which is
equivalent to either BLK_ZONE_COND_IMP_OPEN, BLK_ZONE_COND_EXP_OPEN or
BLK_ZONE_COND_CLOSED.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 100ms compared to over 1.8s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:47 +0000 (06:22 +0900)]
block: add zone write plug condition to debugfs zone_wplugs
Modify queue_zone_wplug_show() to include the condition of a zone write
plug to the zone_wplugs debugfs attribute of a zoned block device.
To improve readability and ease of use, rather than the zone condition
raw value, the zone condition name is given using blk_zone_cond_str().
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the output of the zone_wplugs debugfs attribute file more easily
readable by adding the name of the zone write plugs fields in the
output.
No functional changes.
Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:45 +0000 (06:22 +0900)]
block: introduce BLKREPORTZONESV2 ioctl
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:44 +0000 (06:22 +0900)]
block: introduce blkdev_report_zones_cached()
Introduce the function blkdev_report_zones_cached() to provide a fast
report zone built using the blkdev_get_zone_info() function, which gets
zone information from a disk zones_cond array or zone write plugs.
For a large capacity SMR drive, such fast report zone can be completed
in a few milliseconds compared to several seconds completion times
when the report zone is obtained from the device.
The zone report is built in the same manner as with the regular
blkdev_report_zones() function, that is, the first zone reported is the
one containing the specified start sector and the report is limited to
the specified number of zones (nr_zones argument). The information for
each zone in the report is obtained using blkdev_get_zone_info().
For zoned devices that do not use zone write plug resources,
using blkdev_get_zone_info() is inefficient as the zone report would
be very slow, generated one zone at a time. To avoid this,
blkdev_report_zones_cached() falls back to calling
blkdev_do_report_zones() to execute a regular zone report. In this case,
the .report_active field of struct blk_report_zones_args is set to true
to report zone conditions using the BLK_ZONE_COND_ACTIVE condition in
place of the implicit open, explicit open and closed conditions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:43 +0000 (06:22 +0900)]
block: introduce blkdev_get_zone_info()
Introduce the function blkdev_get_zone_info() to obtain a single zone
information from cached zone data, that is, either from the zone write
plug for the target zone if it exists and from the disk zones_cond
array otherwise.
Since sequential zones that do not have a zone write plug are either
full, empty or in a bad state (read-only or offline), the zone write
pointer can be inferred from the zone condition cached in the disk
zones_cond array. For sequential zones that have a zone write plug, the
zone condition and zone write pointer are obtained from the condition
and write pointer offset managed with the zone write plug. This allows
obtaining the information for a zone much more quickly than having to
execute a report zones command on the device.
blkdev_get_zone_info() falls back to using a regular zone report if the
target zone is flagged as needing an update with the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag, or if the target device does not
use zone write plugs (i.e. a device mapper device). In this case, the
new function blkdev_report_zone_fallback() is used and the zone
condition is reported consistantly with the cahced report, that is, the
BLK_ZONE_COND_ACTIVE condition is used in place of the implicit open,
explicit open and closed conditions. This is achieved by adding the
.report_active field to struct blk_report_zones_args and by having
disk_report_zone() sets the correct zone condition if .report_active is
true.
In preparation for using blkdev_get_zone_info() in upcoming file systems
changes, also export this function as a GPL symbol.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:42 +0000 (06:22 +0900)]
block: refactor blkdev_report_zones() code
In preparation for implementing cached report zone, split the main part
of the code of blkdev_report_zones() into the helper function
blkdev_do_report_zones(), with this new helper taking as argument a
struct blk_report_zones_args pointer instead of a report callback
function and its private argument.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:41 +0000 (06:22 +0900)]
block: track zone conditions
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:40 +0000 (06:22 +0900)]
block: use zone condition to determine conventional zones
The conv_zones_bitmap field of struct gendisk is used to define a bitmap
to identify the conventional zones of a zoned block device. The bit for
a zone is set in this bitmap if the zone is a conventional one, that is,
if the zone type is BLK_ZONE_TYPE_CONVENTIONAL. For such zone, this
always corresponds to the zone condition BLK_ZONE_COND_NOT_WP.
In other words, conv_zones_bitmap tracks a single condition of the
zones of a zoned block device.
In preparation for tracking more zone conditions, change
conv_zones_bitmap into an array of zone conditions, using 1 byte per
zone. This increases the memory usage from 1 bit per zone to 1 byte per
zone, that is, from 16 KiB to about 100 KiB for a 30 TB SMR HDD with 256
MiB zones. This is a trade-off to allow fast cached report zones later
on top of this change.
Rename the conv_zones_bitmap field of struct gendisk to zones_cond. Add
a blk_revalidate_zone_cond() function to initialize the zones_cond array
of a disk during device scan and to update it on device revalidation.
Move the allocation of the zones_cond array to
disk_revalidate_zone_resources(), making sure that this array is always
allocated, even for devices that do not need zone write plugs (zone
resources), to ensure that bdev_zone_is_seq() can be re-implemented to
use the zone condition array in place of the conv zones bitmap.
Finally, the function bdev_zone_is_seq() is rewritten to use a test on
the condition of the target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:39 +0000 (06:22 +0900)]
block: reorganize struct blk_zone_wplug
Reorganize the fields of struct blk_zone_wplug to remove a hole after
the wp_offset field and avoid having the bio_work structure split
between 2 cache lines.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:38 +0000 (06:22 +0900)]
block: introduce disk_report_zone()
Commit b76b840fd933 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:37 +0000 (06:22 +0900)]
block: cleanup blkdev_report_zones()
The variable capacity is used only in one place and so can be removed
and get_capacity(disk) used directly instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:36 +0000 (06:22 +0900)]
block: freeze queue when updating zone resources
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b444a ("block: Prevent potential deadlock in blk_revalidate_disk_zones()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Tue, 4 Nov 2025 21:22:35 +0000 (06:22 +0900)]
block: handle zone management operations completions
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 4 Nov 2025 19:43:02 +0000 (12:43 -0700)]
Merge branch 'autopi-deadlock' into for-6.19/block
Currently the automatic block layer PI generation allocates the integrity
buffer using kmalloc, and thus could deadlock, or fail I/O request due
to memory pressure.
Fix this by adding a mempool, and capping the maximum I/O size on PI
capable devices to not exceed the allocation size of the mempool.
The current block layer automatic integrity protection allocates the
actual integrity buffer, which has three problems:
- because it happens at the bottom of the I/O stack and doesn't use a
mempool it can deadlock under load
- because the data size in a bio is almost unbounded when using lage
folios it can relatively easily exceed the maximum kmalloc size
- even when it does not exceed the maximum kmalloc size, it could
exceed the maximum segment size of the device
Fix this by limiting the I/O size so that we can allocate at least a
2MiB integrity buffer, i.e. 128MiB for 8 byte PI and 512 byte integrity
intervals, and create a mempool as a last resort for this maximum size,
mirroring the scheme used for bvecs. As a nice upside none of this
can fail now, so we remove the error handling and open code the
trivial addition of the bip vec.
The new allocation helpers sit outside of bio-integrity-auto.c because
I plan to reuse them for file system based PI in the near future.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Define struct ublk_thread as local variable in __ublk_io_handler_fn()
instead of accessing it from dev->threads[]
- Extract main IO handling logic into __ublk_io_handler_fn() which is
marked as noinline
- Move CPU affinity setup to ublk_io_handler_fn() before calling
__ublk_io_handler_fn()
- Update ublk_thread_set_sched_affinity() to take struct ublk_thread_info *
instead of struct ublk_thread *, and use pthread_setaffinity_np()
instead of sched_setaffinity()
- Reorder struct ublk_thread fields to group related state together
This change makes each thread's ublk_thread structure truly local to
the thread, improving cache locality and reducing memory usage.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 1 Nov 2025 13:31:19 +0000 (21:31 +0800)]
selftests: ublk: set CPU affinity before thread initialization
Move ublk_thread_set_sched_affinity() call before ublk_thread_init()
to ensure memory allocations during thread initialization occur on
the correct NUMA node. This leverages Linux's first-touch memory
policy for better NUMA locality.
Also convert ublk_thread_set_sched_affinity() to use
pthread_setaffinity_np() instead of sched_setaffinity(), as the
pthread API is the proper interface for setting thread affinity in
multithreaded programs.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 1 Nov 2025 13:31:17 +0000 (21:31 +0800)]
ublk: implement NUMA-aware memory allocation
Implement NUMA-friendly memory allocation for ublk driver to improve
performance on multi-socket systems.
This commit includes the following changes:
1. Rename __queues to queues, dropping the __ prefix since the field is
now accessed directly throughout the codebase rather than only through
the ublk_get_queue() helper.
2. Remove the queue_size field from struct ublk_device as it is no longer
needed.
3. Move queue allocation and deallocation into ublk_init_queue() and
ublk_deinit_queue() respectively, improving encapsulation. This
simplifies ublk_init_queues() and ublk_deinit_queues() to just
iterate and call the per-queue functions.
4. Add ublk_get_queue_numa_node() helper function to determine the
appropriate NUMA node for a queue by finding the first CPU mapped
to that queue via tag_set.map[HCTX_TYPE_DEFAULT].mq_map[] and
converting it to a NUMA node using cpu_to_node(). This function is
called internally by ublk_init_queue() to determine the allocation
node.
5. Allocate each queue structure on its local NUMA node using
kvzalloc_node() in ublk_init_queue().
6. Allocate the I/O command buffer on the same NUMA node using
alloc_pages_node().
This reduces memory access latency on multi-socket NUMA systems by
ensuring each queue's data structures are local to the CPUs that
access them.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 1 Nov 2025 13:31:16 +0000 (21:31 +0800)]
ublk: reorder tag_set initialization before queue allocation
Move ublk_add_tag_set() before ublk_init_queues() in the device
initialization path. This allows us to use the blk-mq CPU-to-queue
mapping established by the tag_set to determine the appropriate
NUMA node for each queue allocation.
The error handling paths are also reordered accordingly.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: add support for REQ_OP_WRITE_ZEROES tracing
Currently, REQ_OP_WRITE_ZEROES operations are not handled in the
blktrace infrastructure, resulting in incorrect or missing operation
labels in ftrace blktrace output. This manifests as write-zeroes
operations appearing with incorrect labels like "N" instead of a
proper "WZ" designation.
This patch adds complete support for REQ_OP_WRITE_ZEROES across the
blktrace infrastructure:
Add BLK_TC_WRITE_ZEROES trace category in blktrace_api.h and update
BLK_TC_END_V2 marker accordingly
Map REQ_OP_WRITE_ZEROES to BLK_TC_WRITE_ZEROES in __blk_add_trace()
to ensure proper trace event categorization
Update fill_rwbs() to generate "WZ" label for write-zeroes operations
in ftrace output, making them easily identifiable
Add "write-zeroes" string mapping in act_to_str array for debugfs
filter interface
Update blk_fill_rwbs() to handle REQ_OP_WRITE_ZEROES for block layer
event tracing
With this fix, write-zeroes operations are now correctly traced and
displayed.
Shi Hao [Sat, 1 Nov 2025 05:44:22 +0000 (11:14 +0530)]
drbd: replace kmap() with kmap_local_page() in receiver path
Use kmap_local_page() instead of kmap() to avoid
CPU contention.
kmap() uses a global set of mapping slots that can cause contention
between multiple CPUs, while kmap_local_page() uses per-CPU slots
eliminating this contention. It also ensures non-sleeping operation
and provides better cache locality.
Convert kmap() to kmap_local_page() as it aligns with ongoing
kernel efforts to modernize kmap() usage for better multi-core
scalability.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ftrace blktrace path allocates buffers and writes trace events but
was using the wrong recording function. After
commit 4d8bc7bd4f73 ("blktrace: move ftrace blk_io_tracer to blk_io_trace2"),
the ftrace interface was moved to use blk_io_trace2 format, but
__blk_add_trace() still called record_blktrace_event() which writes in
blk_io_trace (v1) format.
This causes critical data corruption:
- blk_io_trace (v1) has 32-bit 'action' field at offset 28
- blk_io_trace2 (v2) has 32-bit 'pid' at offset 28 and 64-bit 'action'
at offset 32
- When record_blktrace_event() writes to a v2 buffer:
* Writing pid (offset 32 in v1) corrupts the v2 action field
* Writing action (offset 28 in v1) corrupts the v2 pid field
* The 64-bit action is truncated to 32-bit via lower_32_bits()
Fix by:
1. Adding version switch to select correct format (v1 vs v2)
2. Calling appropriate recording function based on version
3. Defaulting to v2 for ftrace (as intended by commit 4d8bc7bd4f73)
4. Adding WARN_ONCE for unexpected version values
The action field is corrupted because:
- ftrace allocated blk_io_trace2 buffer (64 bytes)
- But called record_blktrace_event() (writes v1, 48 bytes)
- Field offsets don't match, causing corruption
The hex value shown 0x30e3 is actually a PID, not an action code!
blktrace: use debug print to report dropped events
The WARN_ON_ONCE introduced in
commit f9ee38bbf70f ("blktrace: add block trace commands for zone operations")
triggers kernel warnings when zone operations are traced with blktrace
version 1. This can spam the kernel log during normal operation with
zoned block devices when userspace is using the legacy blktrace
protocol.
Currently blktrace implementation drops newly added REQ_OP_ZONE_XXX
when blktrace userspce version is set to 1.
Remove the WARN_ON_ONCE and quietly filter these events. Add a
rate-limited debug message to help diagnose potential issues without
flooding the kernel log. The debug message can be enabled via dynamic
debug when needed for troubleshooting.
This approach is more appropriate as encountering zone operations with
blktrace v1 is an expected condition that should be handled gracefully
rather than warned about, since users may be running older blktrace
userspace tools that only support version 1 of the protocol.
With this patch :-
linux-block (for-next) # git log -1
commit c8966006a0971d2b4bf94c0426eb7e4407c6853f (HEAD -> for-next)
Author: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Date: Mon Oct 27 19:26:53 2025 -0700
Handle the BLKTRACESETUP2 ioctl, requesting an extended version of the
blktrace protocol from user-space.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trace zone write plugging operations on block devices.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: expose ZONE APPEND completions to blktrace
Expose ZONE APPEND completions as a block trace completion action to
blktrace.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: add block trace commands for zone operations
Add block trace commands for zone operations. These commands can only be
handled with version 2 of the blktrace protocol. For version 1, warn if a
command that does not fit into the 16 bits reserved for the command in
this version is passed in.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: move ftrace blk_io_tracer to blk_io_trace2
Move ftrace's blk_io_tracer to the new blk_io_trace2 infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move trace_note() to the new blk_io_trace2 infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: differentiate between blk_io_trace versions
Differentiate between blk_io_trace and blk_io_trace2 when relaying to
user-space depending on which version has been requested by the blktrace
utility.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: add definitions for struct blk_io_trace2
Add definitions for the extended version of the blktrace protocol using a
wider action type to be able to record new actions in the kernel.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass struct blk_user_trace_setup2 to blktrace_setup_finalize(). This
prepares for the incoming extension of the blktrace protocol with a 64bit
act_mask.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: add definitions for blk_user_trace_setup2
Add definitions for a version 2 of the blk_user_trace_setup ioctl. This
new ioctl will enable a different struct layout of the binary data passed
to user-space when using a new version of the blktrace utility requesting
the new struct layout.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: split do_blk_trace_setup into two functions
Split do_blk_trace_setup into two functions, this is done to prepare for
an incoming new BLKTRACESETUP2 ioctl(2) which can receive extended
parameters from user-space.
Also move the size verification logic to the callers in preparation for
using a new internal structure later.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the internal use of the action in blktrace to 64bit. Although for
now only the lower 32bits will be used.
With the upcoming version 2 of the blktrace user-space protocol the upper
32bit will also be utilized.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blktrace: untangle if/else sequence in __blk_add_trace
Untangle the if/else sequence setting the trace action in
__blk_add_trace() and turn it into a switch statement for better
extensibility.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out the code relaying a blktrace event to user-space using relayfs.
This enables adding a second version supporting a new version of the
protocol.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the recording of a blktrace event into its own function,
deduplicating the code.
This also enables recording different versions of the blktrace protocol
later on.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
De-duplicate the calculation of the trace length instead of doing the
calculation twice, once for calling trace_buffer_lock_reserve() and once
for calling relay_reserve().
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Mon, 20 Oct 2025 20:47:15 +0000 (13:47 -0700)]
block: rename min_segment_size
Despite its name, the block layer is fine with segments smaller that the
"min_segment_size" limit. The value is an optimization limit indicating
the largest segment that can be used without considering boundary
limits. Smaller segments can take a fast path, so give it a name that
reflects that: max_fast_segment_size.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change struct size calculation to use struct_size()
to align with new recommended practices[1] which quotes:
"Another common case to avoid is calculating the size of a structure with
a trailing array of others structures, as in:
Bart Van Assche [Mon, 13 Oct 2025 19:28:03 +0000 (12:28 -0700)]
block/mq-deadline: Switch back to a single dispatch list
Commit c807ab520fc3 ("block/mq-deadline: Add I/O priority support")
modified the behavior of request flag BLK_MQ_INSERT_AT_HEAD from
dispatching a request before other requests into dispatching a request
before other requests with the same I/O priority. This is not correct since
BLK_MQ_INSERT_AT_HEAD is used when requeuing requests and also when a flush
request is inserted. Both types of requests should be dispatched as soon
as possible. Hence, make the mq-deadline I/O scheduler again ignore the I/O
priority for BLK_MQ_INSERT_AT_HEAD requests.
Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Yu Kuai <yukuai@kernel.org> Reported-by: chengkaitao <chengkaitao@kylinos.cn> Closes: https://lore.kernel.org/linux-block/20251009155253.14611-1-pilgrimtao@gmail.com/ Fixes: c807ab520fc3 ("block/mq-deadline: Add I/O priority support") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moalv <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 19 Oct 2025 14:59:43 +0000 (04:59 -1000)]
Merge tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the check for lost pelt idle time is done unconditionally
to have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
* tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix pelt lost idle time detection
sched/deadline: Stop dl_server before CPU goes offline
Linus Torvalds [Sun, 19 Oct 2025 14:54:08 +0000 (04:54 -1000)]
Merge tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure perf reporting works correctly in setups using
overlayfs or FUSE
- Move the uprobe optimization to a better location logically
* tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix MMAP2 event device with backing files
perf/core: Fix MMAP event path names with backing files
perf/core: Fix address filter match with backing files
uprobe: Move arch_uprobe_optimize right after handlers execution
Linus Torvalds [Sun, 19 Oct 2025 14:41:27 +0000 (04:41 -1000)]
Merge tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Reset the why-the-system-rebooted register on AMD to avoid stale bits
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously
not flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range
of a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of
monitoring groups created exceeds the number the hardware can track
* tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Prevent reset reasons from being retained across reboot
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
x86/mm: Fix overflow in __cpa_addr()
x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID
Linus Torvalds [Sat, 18 Oct 2025 20:05:13 +0000 (10:05 -1000)]
Merge tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
Linus Torvalds [Sat, 18 Oct 2025 18:38:28 +0000 (08:38 -1000)]
Merge tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"Correct the state transitions for ARM FF-A to match the spec and how
tpm_crb behaves on other platforms"
* tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: Add idle support for the Arm FF-A start method
Linus Torvalds [Sat, 18 Oct 2025 18:35:09 +0000 (08:35 -1000)]
Merge tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Search for MSI Capability with correct ID to fix an MSI regression on
platforms with Cadence IP (Hans Zhang)
- Revert early bridge resource set up to fix resource assignment
failures that broke at least alpha boot and Snapdragon ath12k WiFi
(Ilpo Järvinen)
- Implement VMD .irq_startup()/.irq_shutdown() to fix IRQ issues that
caused boot crashes and broken devices below VMD (Inochi Amaoto)
- Select CONFIG_SCREEN_INFO on X86 to fix black screen on boot when
SCREEN_INFO not selected (Mario Limonciello)
* tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/VGA: Select SCREEN_INFO on X86
PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info()
PCI: Revert early bridge resource set up
PCI: cadence: Search for MSI Capability with correct ID
Linus Torvalds [Sat, 18 Oct 2025 18:22:07 +0000 (08:22 -1000)]
Merge tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link fixes from Dave Jiang:
"A small collection of CXL fixes. In addition to some misc fixes for
the CXL subsystem, a number of fixes for CXL extended linear cache
support are included to make it functional again.
- Avoid missing port component registers setup due to dport
enumeration failure
- Add check for no entries in cxl_feature_info to address accessing
invalid pointer.
- Use %pa printk format to emit resource_size_t in
validate_region_offset()
CXL extended linear cache support fixes:
- Fix setup of memory resource in cxl_acpi_set_cache_size()
- Set range param for region_res_match_cxl_range() as const
(addresses a compile warning for match_region_by_range() fix)
- Fix match_region_by_range() to use region_res_match_cxl_range()
- Subtract to find an hpa_alias0 in cxl_poison events to correct the
alias math calculation"
* tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events
cxl/region: Use %pa printk format to emit resource_size_t
cxl: Fix match_region_by_range() to use region_res_match_cxl_range()
cxl: Set range param for region_res_match_cxl_range() as const
cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size()
cxl/features: Add check for no entries in cxl_feature_info
cxl/port: Avoid missing port component registers setup
Linus Torvalds [Sat, 18 Oct 2025 18:00:43 +0000 (08:00 -1000)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
Linus Torvalds [Sat, 18 Oct 2025 17:23:59 +0000 (07:23 -1000)]
Merge tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix out-of-bounds in FS_IOC_SETFSLABEL
- Add validation for stream entry size to prevent infinite loop
* tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix out-of-bounds in exfat_nls_to_ucs2()
exfat: fix improper check of dentry.stream.valid_size
Linus Torvalds [Sat, 18 Oct 2025 17:18:48 +0000 (07:18 -1000)]
Merge tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix for FlexFiles mirror->dss allocation
- Apply delay_retrans to async operations
- Check if suid/sgid is cleared after a write when needed
- Fix setting the state renewal timer for early mounts after a reboot
* tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS4: Fix state renewals missing after boot
NFS: check if suid/sgid was cleared after a write as needed
NFS4: Apply delay_retrans to async operations
NFSv4/flexfiles: fix to allocate mirror->dss before use
Linus Torvalds [Sat, 18 Oct 2025 17:11:32 +0000 (07:11 -1000)]
Merge tag '6.18-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"smb client fixes, security and smbdirect improvements, and some minor cleanup:
- Important OOB DFS fix
- Fix various potential tcon refcount leaks
- smbdirect (RDMA) fixes (following up from test event a few weeks
ago):
- Fixes to improve and simplify handling of memory lifetime of
smbdirect_mr_io structures, when a connection gets disconnected
- Make sure we really wait to reach SMBDIRECT_SOCKET_DISCONNECTED
before destroying resources
- Make sure the send/recv submission/completion queues are large
enough to avoid ib_post_send() from failing under pressure
- convert cifs.ko to use the recommended crypto libraries (instead of
crypto_shash), this also can improve performance
- Three small cleanup patches"
* tag '6.18-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: Consolidate cmac(aes) shash allocation
smb: client: Remove obsolete crypto_shash allocations
smb: client: Use HMAC-MD5 library for NTLMv2
smb: client: Use MD5 library for SMB1 signature calculation
smb: client: Use MD5 library for M-F symlink hashing
smb: client: Use HMAC-SHA256 library for SMB2 signature calculation
smb: client: Use HMAC-SHA256 library for key generation
smb: client: Use SHA-512 library for SMB3.1.1 preauth hash
cifs: parse_dfs_referrals: prevent oob on malformed input
smb: client: Fix refcount leak for cifs_sb_tlink
smb: client: let smbd_destroy() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: move some duplicate definitions to common/cifsglob.h
smb: client: let destroy_mr_list() keep smbdirect_mr_io memory if registered
smb: client: let destroy_mr_list() call ib_dereg_mr() before ib_dma_unmap_sg()
smb: client: call ib_dma_unmap_sg if mr->sgt.nents is not 0
smb: client: improve logic in smbd_deregister_mr()
smb: client: improve logic in smbd_register_mr()
smb: client: improve logic in allocate_mr_list()
smb: client: let destroy_mr_list() remove locked from the list
smb: client: let destroy_mr_list() call list_del(&mr->list)
...
Linus Torvalds [Sat, 18 Oct 2025 17:07:14 +0000 (07:07 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
Linus Torvalds [Sat, 18 Oct 2025 17:02:28 +0000 (07:02 -1000)]
Merge tag 'powerpc-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle NULL pointer dereference at irq domain teardown
- Fix for handling extraction of struct xive_irq_data
- Fix to skip parameter area allocation when fadump disabled
Thanks to Ganesh Goudar, Hari Bathini, Nam Cao, Ritesh Harjani (IBM),
Sourabh Jain, and Venkat Rao Bagalkote,
* tag 'powerpc-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/fadump: skip parameter area allocation when fadump is disabled
powerpc, ocxl: Fix extraction of struct xive_irq_data
powerpc/pseries/msi: Fix NULL pointer dereference at irq domain teardown
Linus Torvalds [Sat, 18 Oct 2025 16:59:25 +0000 (06:59 -1000)]
Merge tag 'slab-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fixes for two bugs that can be triggered when debugging options are
enabled (Hao Ge, Vlastimil Babka)
* tag 'slab-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: reset slab->obj_ext when freeing and it is OBJEXTS_ALLOC_FAIL
slab: fix clearing freelist in free_deferred_objects()
Stuart Yoder [Sat, 18 Oct 2025 11:25:18 +0000 (14:25 +0300)]
tpm_crb: Add idle support for the Arm FF-A start method
According to the CRB over FF-A specification [1], a TPM that implements
the ABI must comply with the TCG PTP specification. This requires support
for the Idle and Ready states.
This patch implements CRB control area requests for goIdle and
cmdReady on FF-A based TPMs.
The FF-A message used to notify the TPM of CRB updates includes a
locality parameter, which provides a hint to the TPM about which
locality modified the CRB. This patch adds a locality parameter
to __crb_go_idle() and __crb_cmd_ready() to support this.
Paolo Bonzini [Sat, 18 Oct 2025 08:25:43 +0000 (10:25 +0200)]
Merge tag 'kvm-x86-fixes-6.18-rc2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
Linus Torvalds [Fri, 17 Oct 2025 23:04:21 +0000 (13:04 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0.
The GIC CDEOI instruction is encoded as a system register write with
XZR as the source register. However, clang does not honour the "Z"
register constraint, leading to incorrect code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode().
With pseudo-NMIs, interrupts are (additionally) masked at the PMR_EL1
register, handled by local_irq_*()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: debug: always unmask interrupts in el0_softstp()
arm64/sysreg: Fix GIC CDEOI instruction encoding
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for
CONFIG_ARCH_HAS_ELF_CORE_EFLAGS, avoiding an allnoconfig warning
- Fix a few other minor issues
* tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kprobes: convert one final __ASSEMBLY__ to __ASSEMBLER__
riscv: Respect dependencies of ARCH_HAS_ELF_CORE_EFLAGS
riscv: acpi: avoid errors caused by probing DT devices when ACPI is used
riscv: kprobes: Fix probe address validation
riscv: entry: fix typo in comment 'instruciton' -> 'instruction'
RISC-V: clear hot-unplugged cores from all task mm_cpumasks to avoid rfence errors
riscv: kgdb: Ensure that BUFMAX > NUMREGBYTES
rust: cfi: only 64-bit arm and x86 support CFI_CLANG
Brahmajit Das [Fri, 17 Oct 2025 17:15:51 +0000 (22:45 +0530)]
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
This fixes the following build error
CLNG-BPF [test_progs] verifier_global_ptr_args.bpf.o
progs/verifier_global_ptr_args.c:228:5: error: redefinition of 'off' as
different kind of symbol
228 | u32 off;
| ^
The symbol 'off' was previously defined in
tools/testing/selftests/bpf/tools/include/vmlinux.h, which includes an
enum i40e_ptp_gpio_pin_state from
drivers/net/ethernet/intel/i40e/i40e_ptp.c:
This enum is included when CONFIG_I40E is enabled. As of commit 032676ff8217 ("LoongArch: Update Loongson-3 default config file"),
CONFIG_I40E is set in the defconfig, which leads to the conflict.
Renaming the local variable avoids the redefinition and allows the
build to succeed.
Suggested-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Brahmajit Das <listout@listout.xyz> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20251017171551.53142-1-listout@listout.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sahil Chandna [Tue, 14 Oct 2025 18:56:35 +0000 (00:26 +0530)]
bpf: Do not disable preemption in bpf_test_run().
The timer mode is initialized to NO_PREEMPT mode by default,
this disables preemption and force execution in atomic context
causing issue on PREEMPT_RT configurations when invoking
spin_lock_bh(), leading to the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6107, name: syz.0.17
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
Preemption disabled at:
[<ffffffff891fce58>] bpf_test_timer_enter+0xf8/0x140 net/bpf/test_run.c:42
Fix this, by removing NO_PREEMPT/NO_MIGRATE mode check.
Also, the test timer context no longer needs explicit calls to
migrate_disable()/migrate_enable() with rcu_read_lock()/rcu_read_unlock().
Use helpers rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate()
instead.
Reported-by: syzbot+1f1fbecb9413cdbfbef8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1f1fbecb9413cdbfbef8 Suggested-by: Yonghong Song <yonghong.song@linux.dev> Suggested-by: Menglong Dong <menglong.dong@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: syzbot+1f1fbecb9413cdbfbef8@syzkaller.appspotmail.com Co-developed-by: Brahmajit Das <listout@listout.xyz> Signed-off-by: Brahmajit Das <listout@listout.xyz> Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com> Link: https://lore.kernel.org/r/20251014185635.10300-1-chandna.sahil@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ada Couprie Diaz [Tue, 14 Oct 2025 09:25:36 +0000 (10:25 +0100)]
arm64: debug: always unmask interrupts in el0_softstp()
We intend that EL0 exception handlers unmask all DAIF exceptions
before calling exit_to_user_mode().
When completing single-step of a suspended breakpoint, we do not call
local_daif_restore(DAIF_PROCCTX) before calling exit_to_user_mode(),
leaving all DAIF exceptions masked.
When pseudo-NMIs are not in use this is benign.
When pseudo-NMIs are in use, this is unsound. At this point interrupts
are masked by both DAIF.IF and PMR_EL1, and subsequent irq flag
manipulation may not work correctly. For example, a subsequent
local_irq_enable() within exit_to_user_mode_loop() will only unmask
interrupts via PMR_EL1 (leaving those masked via DAIF.IF), and
anything depending on interrupts being unmasked (e.g. delivery of
signals) will not work correctly.
This was detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING.
Move the call to `try_step_suspended_breakpoints()` outside of the check
so that interrupts can be unmasked even if we don't call the step handler.
Fixes: 0ac7584c08ce ("arm64: debug: split single stepping exception entry") Cc: <stable@vger.kernel.org> # 6.17 Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: added Mark's rewritten commit log and some whitespace] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
projects / thirdparty / linux.git / log
