arm64: dts: qcom: msm8939: Use mboxes properties for APCS

Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-4-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916: Use mboxes properties for APCS

Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-3-6556c47cb501@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq8074: fix GCC node name

Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-14-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq6018: fix GCC node name

Device nodes should have generic names. Use 'clock-controller@' as a GCC
node name instead of a non-generic 'gcc@'.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-13-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: drop #power-domain-cells property of GCC

On IPQ9574 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-12-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: drop #power-domain-cells property of GCC

On IPQ5332 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-11-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5018: drop #power-domain-cells property of GCC

On IPQ5018 the Global Clock Controller (GCC) doesn't provide power
domains. Drop the #power-domain-cells property from the controller
device node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240529-qcom-gdscs-v2-10-69c63d0ae1e7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-hdk: remove redundant properties

The commit 65931e59e039 ("arm64: dts: qcom: sm8650: move USB graph to
the SoC dtsi") and commit fbb22a182267 ("arm64: dts: qcom: sm8650: move
PHY's orientation-switch to SoC dtsi") have moved some of the properties
from the board DT files to the sm8650.dtsi. As the patch for sm8650 HDK
predates those commits, it still had those properties inside.

Drop these duplicate proerties from the sm8650-hdk.dts.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-sm8650-hdk-redundant-v1-1-c39c2ae65f3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching

Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.

For now USB Power Delivery properties are skipped / disabled, so that
the (presumably) bootloader-configured charger doesn't get messed with
and we can charge the phone with at least some amount of power.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-3-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm7250b: Add a TCPM description

Type-C port management functionality lives inside of the PMIC block on
pm7250b.

The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-2-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster

Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240530-fp4-tcpm-v3-1-612d4bbd5e09@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: Describe the PCIe 6a resources

On both the CRD and QCP, on PCIe 6a sits the NVMe. Add the 3.3V
gpio-controlled regulator and the clkreq, perst and wake gpios as
resources for the PCIe 6a.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-3-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: Fix the PHY regulator for PCIe 6a

The actual PHY regulator is L1d instead of L3j, so fix it accordingly.

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-2-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: Fix the PHY regulator for PCIe 6a

The actual PHY regulator is L1d instead of L3j, so fix it accordingly.

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-1-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators

The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-2-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators

The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Remove usb default dr_mode

OTG is default usb dr_mode, so this property can be removed.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240531090422.158813-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Move usb-role-switch to SoC dtsi

The usb-role-switch is SM8550 SoC property, so move it from board dts
to SM8550 SoC dtsi.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531090422.158813-2-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add IMEM and PIL info region

Add a simple-mfd representing IMEM on SA8775p and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240531093531.238075-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: soc: qcom: add qcom,sa8775p-imem compatible

Add qcom,sa8775p-imem compatible name support.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240531093531.238075-2-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550-samsung-q5q: fix typo

It looks like "cdsp_mem" was pasted in the license header by accident.
Fix the typo by removing it.

Signed-off-by: David Wronek <david@mainlining.org>
Fixes: ba2c082a401f ("arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240531-fix-typo-q5q-v1-1-95f10a8eff9b@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: Add Broadcast_AND register in LLCC block

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8650.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/3a8804b35f44485637398faa9c0bda76813fe4d7.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Add Broadcast_AND register in LLCC block

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added
which checks for status bit 1. This hasn't been updated and Broadcast_OR
region was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8550.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/9bb6e086adec4d3b2134462d504822fb79b009e7.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Add Broadcast_AND register in LLCC block

Chipsets before SM8450 have only one broadcast register (Broadcast_OR)
which is used to broadcast writes and check for status bit 0 only in
all channels.
>From SM8450 onwards, a new Broadcast_AND region was added which checks
for status bit 1. This hasn't been updated and Broadcast_OR region
was wrongly being used to check for status bit 1 all along.
Hence mapping Broadcast_AND region's address space to LLCC in SM8450.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Link: https://lore.kernel.org/r/bfc817da4188abdf5b543bedafb9cb0eb82806c2.1717014052.git.quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add llcc support for the SA8775p platform

Add llcc support for the SA8775p platform.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240529101534.3166507-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add QCM6490 SHIFTphone 8

The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following
features:

* 12GB of RAM, 512GB UFS storage
* 1080p display.
* Hardware kill switches for cameras and microphones
* UART access via type-c SBU pins (enabled by an internal switch)

Initial support includes:

* Framebuffer display
* UFS and sdcard storage
* Battery monitoring and USB role switching via pmic glink
* Bluetooth
* Thermals
* Wifi

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-2-79e7a28c1b08@linaro.org
[bjorn: Fixed indent of block comments]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add QCM6490 SHIFTphone 8

The SHIFTphone 8 (codename otter) is a smartphone based on the QCM6490
SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-1-79e7a28c1b08@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs

During the initial bringup, all of the peripherals on non-SMB PMICs
were either not used, or were not necessary to accomplish certain
goals. This however, left a hole in the hardware description.

Add the missing ones.

Note that the PM8010 errors out on reads on the CRD (works fine on the
QCP) for reasons unknown, but that shall be ironed out in the future..

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240529-topic-x1e_pmic-v1-2-9de0506179eb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5

Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550

Currently working features:
- Framebuffer
- UFS
- i2c
- Buttons

Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
Link: https://lore.kernel.org/r/20240411-samsung-galaxy-zfold5-q5q-v6-2-8142297515aa@yahoo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5

This documents Samsung Galaxy Z Fold5 (samsung,q5q)
which is a foldable phone by Samsung based on the sm8550 SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
Link: https://lore.kernel.org/r/20240411-samsung-galaxy-zfold5-q5q-v6-1-8142297515aa@yahoo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add DT nodes for the TBUs

Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sc7280 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.

Describe all the registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.

Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-8-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Add DT nodes for the TBUs

Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.

Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.

Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-6-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Add OPP table support to PCIe

PCIe host controller driver needs to choose the appropriate performance
state of RPMh power domain and interconnect bandwidth based on the PCIe
data rate.

Hence, add the OPP table support to specify RPMh performance states and
interconnect peak bandwidth.

It should be noted that the different link configurations may share the
same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1
link have the same bandwidth and share the same OPP entry.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-4-78c73edf50de@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Add interconnect path to PCIe node

Add PCIe-MEM & CPU-PCIe interconnect path to the PCIe nodes.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-1-78c73edf50de@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: mark ethernet devices as DMA-coherent

Ethernet devices are cache coherent, mark it as such in the dtsi.

Fixes: ff499a0fbb23 ("arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface")
Fixes: e952348a7cc7 ("arm64: dts: qcom: sa8775p: add a node for EMAC1")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-1-04e1198858c5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi

The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.

cf. ath10k_qmi_driver_event_work()

Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.

Jeff Johnson wrote:

  The feedback I received was "it might be ok to change all ath10k qmi
  to skip waiting for msa_ready", and it was pointed out that ath11k
  (and ath12k) do not wait for it.

  However with so many deployed devices, "might be ok" isn't a strong
  argument for changing the default behavior.

cf. also
https://wiki.postmarketos.org/wiki/Qualcomm_Snapdragon_835_(MSM8998)#WLAN

Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/0914f96e-fcfd-4088-924a-fc1991bce75f@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm632-fairphone-fp3: Enable vibrator

Enable the vibrator on the PMI632 which is used on this phone.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240418-fp3-vibra-v1-2-b636b8b3ff32@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmi632: Add vibrator

Add a node for the vibrator module found inside the PMI632.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240418-fp3-vibra-v1-1-b636b8b3ff32@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Split PMU nodes for heterogeneous CPUs

Arm heterogeneous configurations should have separate PMU nodes for each
CPU uarch as the uarch specific events can be different. The
"arm,armv8-pmuv3" compatible is also intended for s/w models rather than
specific uarch implementations.

All the kryo CPUs are missing PMU compatibles, so they can't be fixed.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417204247.3216703-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qcs404: Use qcs404-hfpll compatible for hfpll

Follow the updated bindings and use a QCS404-specific compatible for the
HFPLL on this SoC.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-3-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add Motorola Moto G 2015 (osprey)

Motorola Moto G 2015 is an msm8916 based smartphone.

Supported features:

- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound.

Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Use common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-4-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add Motorola Moto E 2015 LTE (surnia)

Motorola Moto E 2015 LTE is an msm8916 based smartphone.

Supported features:

- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound.

Signed-off-by: Wiktor Strzębała <wiktorek140@gmail.com>
[Valérie: Sound and modem]
Co-developed-by: Valérie Roux <undev@unixgirl.xyz>
Signed-off-by: Valérie Roux <undev@unixgirl.xyz>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Use common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-3-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add device tree for Motorola Moto G4 Play (harpia)

Motorola Moto G4 Play is an msm8916 based smartphone.

Supported features:

- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound;
- Accelerometer.

msm8916 Moto devices share significant portion of the design so the
common parts are separated into a common dtsi.

Signed-off-by: Ruby Iris Juric <ruby@srxl.me>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Split up to common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-2-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-rossa: Add LIS2HH12 accelerometer

Core Prime LTE uses ST LIS2HH12 accelerometer. Add support for it.

[Stephen: Use common &st_accel definition from common dtsi]

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-4-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-fortuna: Add LSM303C accelerometer/magnetometer

Some Grand Prime use a ST LSM303C accelerometer/magnetometer combo.
Add support for it.

Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Stephan: Move sensors to common dtsi (disabled by default)]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-fortuna: Add BMC150 accelerometer/magnetometer

Some Grand Prime use a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.

Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Stephan: Move sensors to common dtsi, disabled by default]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Add it to grandprimelte. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240406111348.14358-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add msm8916 based Motorola devices

Add compatible values for the msm8916 based Motorola smartphones.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-1-502b58176d34@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmi8950: add pwm node

This node is actually found on some msm8953 devices (xiaomi-mido) and
allows irled enablement

Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240402-pmi8950-pwm-support-v1-2-1a66899eeeb3@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Lenovo Smart Tab M10 (WiFi)

This documents Lenovo Smart Tab M10 (WiFi) (model tbx605f)
which is a 10.1" tablet by Lenovo based on the SDM450 SoC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240523-topic-sdm450-upstream-tbx605f-v1-1-e52b89133226@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
Box Core board based on the Qualcomm APQ8016E SoC.

Support for Schneider Electric HMIBSC. Features:
- Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
- 1GiB RAM
- 8GiB eMMC, SD slot
- WiFi and Bluetooth
- 2x Host, 1x Device USB port
- HDMI
- Discrete TPM2 chip over SPI
- USB ethernet adaptors (soldered)

Co-developed-by: Jagdish Gediya <jagdish.gediya@linaro.org>
Signed-off-by: Jagdish Gediya <jagdish.gediya@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20240527053826.294526-4-sumit.garg@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board

Document the compatible for the Schneider Electric HMIBSC IIoT edge box
core board based on the Qualcomm APQ8016E SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20240527053826.294526-3-sumit.garg@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: vendor-prefixes: Add Schneider Electric

Add vendor prefix for Schneider Electric (https://www.se.com/).

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20240527053826.294526-2-sumit.garg@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: drop source clock entries from the UFS node

There is no need to mention and/or to touch in any way the intermediate
(source) clocks. Drop them from MSM8996 UFSHCD schema, making it follow
the example lead by all other platforms.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-4-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: set GCC_UFS_ICE_CORE_CLK freq directly

Instead of setting the frequency of the interim UFS_ICE_CORE_CLK_SRC
clock, set the frequency of the leaf GCC_UFS_ICE_CORE_CLK clock directly.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-2-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: specify UFS core_clk frequencies

Follow the example of other platforms and specify core_clk frequencies
in the frequency table in addition to the core_clk_src frequencies. The
driver should be setting the leaf frequency instead of some interim
clock freq.

Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Fixes: 57fc67ef0d35 ("arm64: dts: qcom: msm8996: Add ufs related nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-1-ee1a28bf8579@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: add fastrpc nodes

The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240418-msm8996-remoteproc-v2-3-b9ae852bf6bc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: add glink-edge nodes

MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:

modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0

adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240418-msm8996-remoteproc-v2-2-b9ae852bf6bc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add TP-Link Archer AX55 v1

Add device tree source for the TP-Link Archer AX55 v1 [1]
which is a dual-band WiFi router based on the IPQ5018 SoC.

At the moment, only the UART, the GPIO LEDs and buttons
are usable, but it makes it possible to boot an initramfs
image on the device.

The device tree can be extended in the future, once support
for other periherals will be available for the platform.

1. https://www.tp-link.com/en/home-networking/wifi-router/archer-ax55/v1/

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240326-archer-ax55-v1-v4-2-dc5b54a4bb00@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: add TP-Link Archer AX55 v1

Document the TP-Link Archer AX55 v1 which is a dual-band
WiFi router based on the IPQ5018 SoC.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240326-archer-ax55-v1-v4-1-dc5b54a4bb00@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add Samsung Galaxy Note 3

Add the compatible for this Samsung smartphone ("phablet" as it was
named in that era).

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240314-samsung-hlte-v2-1-84094b41c033@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Mark PCIe EP controller as cache coherent

The PCIe EP controller on SA8775P supports cache coherency, hence add
the "dma-coherent" property to mark it as such.

Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1710166298-27144-4-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Document samsung,milletwifi device

Add binding documentation for Samsung Galaxy Tab 4 8.0 Wi-Fi
tablet which is based on Snapdragon 400 (apq8026) SoC.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bryant Mairs <bryant@mai.rs>
Link: https://lore.kernel.org/r/20240219214643.197116-2-bryant@mai.rs
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: add MDIO bus

The IPQ95xx uses an IPQ4019 compatible MDIO controller that is already
supported. Add a DT node to expose it.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-2-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Add WCNSS node

Add node describing wireless connectivity subsystem.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240508163455.8757-5-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Add Adreno GPU

Add Adreno GPU node.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240508163455.8757-4-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Add MDSS nodes

Add MDSS nodes to support displays on MSM8976 SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240508163455.8757-3-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8976: Add IOMMU nodes

Add the nodes describing the apps and gpu iommu and its context banks
that are found on msm8976 SoCs.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240508163455.8757-2-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7280: Add APR nodes for sound

Add the different services found on APR on some devices with SC7280 SoC.
Additionally add an empty sound node in the root node as is seen on
other SoC dtsi files so device dt's can easily use that.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240510-sc7280-apr-v1-1-e9eabda05f85@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints

Follow other Qualcomm platforms and rename pm8150b_role_switch_in to
pm8150_hs_in. Corresponding port is described as HS port rather than
role switching.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-9-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: describe USB signals properly

Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-8-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: describe USB signals properly

Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-7-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: describe USB signals properly

Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-6-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings

To follow other Qualcomm platforms, update QMP USB+DP PHYs to use newer
bindings rather than old bindings which had PHYs as subdevices.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-5-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY

The SuperSpeed signals originate from the DWC3 host controller and then
are routed through the Combo QMP PHY, where they are multiplexed with
the DisplayPort signals. Add corresponding OF graph link.

Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-4-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: describe HS signals properly

The OF graph should describe physical signals. There is no 'role switch'
signal between Type-C connector and the DWC3 USB controller. Rename
endpoints to mention USB HS signal instead (this follows the example
lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and all PMIC
GLINK platforms).

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-3-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: correct dispcc clocks

Correct the clocks being used by the display clock controller on the
SC8180X platform (to match the schema):
- Drop the sleep clock
- Add DSI clocks
- Reorder eDP / DP clocks

This changes the order of clocks, however it should be noted that the
clock list was neither correct nor followed the schema beforehand.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-2-ad153c747a97@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998: enable adreno_smmu by default

15 qcom platform DTSI files define an adreno_smmu node.
msm8998 is the only one with adreno_smmu disabled by default.

There's no reason why this SMMU should be disabled by default,
it doesn't need any further configuration.

Bring msm8998 in line with the 14 other platforms.

This fixes GPU init failing with ENODEV:
msm_dpu c901000.display-controller: failed to load adreno gpu
msm_dpu c901000.display-controller: failed to bind 5000000.gpu (ops a3xx_ops): -19

Fixes: 87cd46d68aeac8 ("Configure Adreno GPU and related IOMMU")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/be51d1a4-e8fc-48d1-9afb-a42b1d6ca478@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75: Support for I2C and SPI

Add devicetree node for I2C and SPI busses in SDX75.

Signed-off-by: Rohit Agarwal <rohiagar@qti.qualcomm.com>
Link: https://lore.kernel.org/r/20240517100423.2006022-3-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add coresight nodes for SA8775p

Add following coresight components on SA8775p, TMC/ETF, TPDM,
dynamic Funnel, TPDA and ETM.

Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Link: https://lore.kernel.org/r/20240521011946.3148712-2-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm450: add Lenovo Smart Tab M10 DTS

This add initial support for the Lenovo Smart Tab M10 (WiFi)
(model tbx605f) which is a 10.1" tablet by Lenovo based on the
SDM450 SoC.

It has a 10.1" LCP touch panel, SDCard slot, Volume+Power buttons,
USB-C port amd front-facing camera (not supported).

The proper LCP Panel support will be added later, for now using the
simeple-framebuffer with the bootloader-initialized video memory.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240523-topic-sdm450-upstream-tbx605f-v1-3-e52b89133226@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card

Enable SDHCI on sdx75-idp to support SD card.
Also add the required regulators.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Link: https://lore.kernel.org/r/20240523120337.9530-4-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75: Add SDHCI node

Add sdhc node for SDX75 SoC to support SD card.
Also add pins required for SDHCI.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Link: https://lore.kernel.org/r/20240523120337.9530-3-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm670: add smem region

The shared memory region is used for information about the SoC and
communication with remote processors. Add the smem region for SDM670.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20240524012023.318965-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850-lenovo-yoga-c630: add WiFi calibration variant

Add calibration variant that is used by the board data for the laptop:

bus=snoc,qmi-board-id=ff,qmi-chip-id=30214,variant=Lenovo_C630

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-yoga-wifi-calib-v1-1-af9dc33880e8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850-lenovo-yoga-c630: fix IPA firmware path

Specify firmware path for the IPA network controller on the Lenovo Yoga
C630 laptop. Without this property IPA tries to load firmware from the
default location, which likely will fail.

Fixes: 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-yoga-ipa-fw-v1-1-99ac1f5db283@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: Enable download mode register write

Enable download mode setting for sm8650 which can help collect
ramdump for this SoC.

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1715888133-2810-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qru1000-idp: enable USB nodes

Enable both USB controllers and associated hsphy and qmp phy
nodes on QRU1000 IDP.

Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20240502090326.21489-4-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000-idp: enable USB nodes

Enable both USB controllers and associated hsphy and qmp phy
nodes on QDU1000 IDP.

Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20240502090326.21489-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000: Add USB3 and PHY support

Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
SNPS HS PHY on QDU1000/QRU1000 SoCs. Also add required pins for USB,
so that the interface can work reliably.

Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20240502090326.21489-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-xiaomi-common: drop excton from the USB PHY

The USB PHYs don't use extcon connectors, drop the extcon property from
the hsusb_phy1 node.

Fixes: 46680fe9ba61 ("arm64: dts: qcom: msm8996: Add support for the Xiaomi MSM8996 platform")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-13-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sda660-ifc6560: document missing USB PHY supplies

On the IFC6560 one of the USB PHY supplies is the L10A power supply.
However this regulator also supplies VDDA_APC1_CS, VDD_PLL2 and VDD_P11
consumers. Touching the supply causes the board to be reset. Document
the supply as a fixed always-on regulator.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-12-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-11-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-10-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: b7e2fba06622 ("arm64: dts: qcom: sm8250: Add UFS controller and PHY")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-9-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: 5a814af5fc22 ("arm64: dts: qcom: sm6350: Add UFS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-8-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-7-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: cc16687fbd74 ("arm64: dts: qcom: sdm845: add UFS controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-6-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: add power-domain to UFS PHY

The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add
corresponding power-domain the the PHY node.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-5-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: drop extra UFS PHY compat

The DT schema doesn't have a fallback compatible for
qcom,sc7180-qmp-ufs-phy. Drop it from the dtsi too.

Fixes: 858536d9dc94 ("arm64: dts: qcom: sc7180: Add UFS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-4-f1fd15c33fb3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add ep pcie1 controller node

Add ep pcie dtsi node for pcie1 controller found on sa8775p platform.
It supports gen4 and x4 link width. Limiting the speed to Gen3 due to
stability issue with Gen4.

Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Link: https://lore.kernel.org/r/1714494089-7917-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>