Frantisek Sumsal [Thu, 16 Feb 2023 18:48:03 +0000 (19:48 +0100)]
test: avoid matching other fields than __SEQNUM=
The current unanchored grep sometimes matches MESSAGE=/_CMDLINE= fields
that contain "__SEQNUM=" instead of just the __SEQNUM= field, causing
spurious test fails:
Jan Janssen [Thu, 16 Feb 2023 14:24:44 +0000 (15:24 +0100)]
boot: Fix assertion failure
The TPM code expects a description unless the PCR index indicates that
no measurements have to take place. The assert was preempting this
check from happening.
HATAYAMA Daisuke [Sun, 12 Feb 2023 12:15:08 +0000 (12:15 +0000)]
sulogin: fix control lost of the current terminal when default.target is rescue.target
When default.target is rescue.target, exiting from the single-user shell
results in lost of the control of the current terminal. This is because the
operation performed to continue to boot is systemctl default but default.target
is now rescue.target and it is already active. Hence, no new process that
controls the current terminal is created. Users need to make hardware reset to
recover the situation.
This sounds like a bit corner case issue and some might feel configuring
default.target as rescue.target is odd because there are several other ways to
transition to rescue.mode without configuring default.target to rescue.target
such as systemctl rescue or systemd.unit=rescue.target something like
that. However, users unfamiliar with systemd operations tend to come up with
systemctl set-default rescue.target.
To fix this issue, let's transition to default.target only when default.target
is inactive. Otherwise, invoke the single-user shell again to keep control of
the current terminal for users.
This new logic depends on whether D-Bus working well. Exiting without any check
of result of systemctl default could lead to again the control lost of the
current terminal. Hence, add checking results of each D-Bus operations
including systemctl default and invoke the single-user shell if they fail.
Luca Boccassi [Wed, 15 Feb 2023 22:06:26 +0000 (22:06 +0000)]
mkosi: configure multiarch libdir in debian/ubuntu builds
Debian/Ubuntu use /usr/lib/<triplet> instead of /usr/lib64, so configure it
accordingly. This is especially important for cryptsetup token plugins,
as cryptsetup comes from the distro and is configured to look into those
directories.
Daan De Meyer [Wed, 15 Feb 2023 10:16:28 +0000 (11:16 +0100)]
mkosi: Enable debug logging in CI
"Failed to dissect image: connection timed out" messages have been
appearing sporadically in mkosi CI. Let's enable debug logging to
help figure out why.
Frantisek Sumsal [Wed, 15 Feb 2023 17:08:35 +0000 (18:08 +0100)]
journalctl: actually run the static destructors
In journalctl we don't run the static destructors defined via
the STATIC_DESTRUCTOR_REGISTER() macro, since it requires a corresponding
static_destruct() call. In most cases this is handled by
the DEFINE_(TEST_)?MAIN*() macros, but journalctl defines its own main
function, so let's handle that as well.
$ valgrind --suppressions=valgrind.supp --show-leak-kinds=all --leak-check=full build/journalctl --no-pager -u system.slice -n 10 >/dev/null
==2778093== Memcheck, a memory error detector
==2778093== Copyright (C) 2002-2022, and GNU GPL'd, by Julian Seward et al.
==2778093== Using Valgrind-3.19.0 and LibVEX; rerun with -h for copyright info
==2778093== Command: build/journalctl --no-pager -u system.slice -n 10
==2778093==
==2778093==
==2778093== HEAP SUMMARY:
==2778093== in use at exit: 8,221 bytes in 4 blocks
==2778093== total heap usage: 458 allocs, 454 frees, 255,182 bytes allocated
==2778093==
==2778093== 13 bytes in 1 blocks are still reachable in loss record 1 of 4
==2778093== at 0x484586F: malloc (vg_replace_malloc.c:381)
==2778093== by 0x4DA256D: strdup (strdup.c:42)
==2778093== by 0x4ADB747: strv_extend_with_size (strv.c:544)
==2778093== by 0x405386: strv_extend (strv.h:45)
==2778093== by 0x40816F: parse_argv (journalctl.c:933)
==2778093== by 0x40EAB5: main (journalctl.c:2111)
==2778093==
==2778093== 16 bytes in 1 blocks are still reachable in loss record 2 of 4
==2778093== at 0x484578A: malloc (vg_replace_malloc.c:380)
==2778093== by 0x484A70B: realloc (vg_replace_malloc.c:1437)
==2778093== by 0x4ADB2A3: strv_push_with_size (strv.c:423)
==2778093== by 0x4ADB620: strv_consume_with_size (strv.c:496)
==2778093== by 0x4ADB770: strv_extend_with_size (strv.c:548)
==2778093== by 0x405386: strv_extend (strv.h:45)
==2778093== by 0x40816F: parse_argv (journalctl.c:933)
==2778093== by 0x40EAB5: main (journalctl.c:2111)
==2778093==
==2778093== LEAK SUMMARY:
==2778093== definitely lost: 0 bytes in 0 blocks
==2778093== indirectly lost: 0 bytes in 0 blocks
==2778093== possibly lost: 0 bytes in 0 blocks
==2778093== still reachable: 29 bytes in 2 blocks
==2778093== suppressed: 8,192 bytes in 2 blocks
==2778093==
==2778093== For lists of detected and suppressed errors, rerun with: -s
==2778093== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
Joan Bruguera [Sun, 12 Feb 2023 20:06:08 +0000 (20:06 +0000)]
resolved: Fall back to TCP if UDP is blocked
If UDP is blocked on the system (e.g. by iptables or BPF), the kernel will
return EPERM on some or all of the system calls (connect, sendmsg, etc.).
In this case, try to fall back to TCP, which hopefully will not be blocked.
Mike Yuan [Tue, 17 Jan 2023 17:21:59 +0000 (01:21 +0800)]
vconsole: allow setting default keymap through build option
Allow defining the default keymap to be used by
vconsole-setup through a build option. A template
vconsole.conf also gets populated by tmpfiles if
it doesn't exist.
Luca Boccassi [Wed, 15 Feb 2023 00:44:01 +0000 (00:44 +0000)]
cryptsetup: do not assert when unsealing token without salt
Salt was added in v253. We are not checking whether it was actually found
(non-zero size), so when an old tpm+pin enrollment is opened things go boom.
For good measure, check both the buffer and the size in both places.
Assertion 'saltlen > 0' failed at src/shared/tpm2-util.c:2490, function tpm2_util_pbkdf2_hmac_sha256(). Aborting.
Yu Watanabe [Fri, 3 Feb 2023 03:28:31 +0000 (12:28 +0900)]
test-execute: drop capabilities when testing with user manager
Before this, tests are split into two categories, system and user, but
both are running in fully privileged environment. Hence, unprivileged
user scope was mostly not covered by the test.
Let's run all tests in both system and user scopes, and drop capabilities
when Manager is running in user scope.
This also makes the host environment protected more from the test run.
dissect-image: unknown/unsupported diskseq is indicated by 0, not by UINT64_MAX
At almost all places if diskseq is not supported we encode this as
diskseq zero. But in two places we got the check for that wrong,
assuming it was UINT64_MAX.
Daan De Meyer [Thu, 9 Feb 2023 08:53:05 +0000 (09:53 +0100)]
mkosi: Update to latest
Let's make sure we're testing unprivileged builds properly. Usage
of SourceFileTransfer= and SourceFileTransferFinal= are removed as
they were dropped by mkosi. SourceFileTransfer=mount is now the
default in mkosi so behavior for the build script is unchanged. We
stop copying sources in the final image until mkosi adds support
for virtiofs.
Jan Janssen [Thu, 9 Feb 2023 20:03:14 +0000 (21:03 +0100)]
boot: Fix undefined reference to raise() on arm
This is just a workaround. Once we drop gnu-efi, the arm build system
for EFI binaries should be changed to use the arm-none-eabi toolchain,
which should not exhibit this behavior.
Follow-up for 4453ebe4db0511d25bed1040930ea6430c1bed91.
With the feature list all dandified, the most important part of the
output, i.e. the project name and version, are less visible.
journald: fix ignored filtering patterns for delegated cgroups
If a service defines Delegate=yes, its subcgroup won't inherit the
LogFilterPatterns= option, because the option is stored on the unit's
cgroup attributes, not on the subcgroup.
Fixed by using the unit's cgroup attributes instead.
From a given cgroup path, cg_path_get_unit() allows to retrieve the
unit's name. Although, this removes the path to the unit's cgroup,
preventing the result to be used to fetch xattrs.
Introduce cg_path_get_unit_path() which provides the path to the unit's
cgroup. This function behave similarly to cg_path_get_unit() (checking
the validity and escaping the unit's name).
manager: improve message about Reload/Reexec requests
If we fail to get the necessary information, let's just not print that
part of the message. 'n/a' looks pretty ugly.
I used a bunch of ternary operators instead of seperate log lines because
with two components that might or might not be there, we need four different
combinations.
Also, the unit name doesn't need to be quoted, it's always printable.
projects / thirdparty / systemd.git / log
