When we dissect images automatically, let's be a bit more conservative
with the file system types we are willing to mount: only mount common
file systems automatically.
Explicit mounts requested by admins should always be OK, but when we do
automatic mounts, let's not permit barely maintained, possibly legacy
file systems.
The list for now covers the four common writable and two common
read-only file systems. Sooner or later we might want to add more to the
list.
Also, it might make sense to eventually make this configurable via the
image dissection policy logic.
string-util: rework empty_to_null() to not change "const" qualifier of input
This changes the definition from enpty_to_null() so that we are still
typesafe (i.e. only accept strings) but do not drop (or add) any const
to the returned string that wasn't also on the input.
Hans de Goede [Wed, 21 Dec 2022 11:18:52 +0000 (12:18 +0100)]
hwdb: Add mic-mute, control-center and screen-rotation mappings for MSI laptops
The MSI Summit E16 Flip A12UCT laptop sends the following unmapped
atkbd scancodes:
0x91: Launch MSI Control Center
0xf1: Toggle mic mute
0xf2: Rotate screen
The 0x91, 0xf1 and 0xf2 codes are already present in the MSI Prestige/Modern
series specific keymappings and the 0xf1 mapping is also already present in
the MSI Bravo 15-B5DX FnKeys entry.
This shows that these are generic to many MSI models, so add mappings for
these to the generic MSI mappings.
Since the MSI Bravo 15-B5DX FnKeys entry only contains the 0xf1 mapping and
that is covered by the generic MSI mappings now, that entry is removed.
CVE-2022-4415: systemd: coredump not respecting fs.suid_dumpable kernel setting
Affects systemd >= 247 with libacl support enabled.
This is a merge of https://github.com/systemd/systemd-security/pull/12/.
I'm doing the merge locally because github doesn't support merging directly
from systemd/systemd-security to systemd/systemd.
ukify: check early if inputs exist and are readable
It's much nicer for the user if we fail early instead of doing partial
processing if we cannot read some input. We can't do those checks immediately
from argparse.Parser.parse_args(), because we want to fully process the
commandline first. In particular, even with invalid args, if --help is
specified somewhere, we want to handle that. Thus, we need to delay the checks
after argparse.Parser.parse_args() returns.
Ukify didn't have type annotations on functions, but it probably should.
Jörg's suggested correction included them and we might just as well start here.
Mike Yuan [Sat, 17 Dec 2022 13:07:32 +0000 (21:07 +0800)]
systemctl: new option --drop-in for specifying drop-in filename
Previously 'systemctl edit' would only operate on
'override.conf', but users may need more than that.
Thus the new option '--drop-in' is added to allow
users to specify the drop-in file name.
The autodetection code is supposed to throw ValueError when it
cannot figure out the version so that we fall back to the next method.
With the patch:
Kernel version not specified, starting autodetection 😖.
Real-Mode Kernel Header magic not found
+ readelf --notes vmlinuz/arm64/vmlinuz-6.0.9-300.fc37.aarch64
readelf: vmlinuz/arm64/vmlinuz-6.0.9-300.fc37.aarch64: Error: Not an ELF file - it has the wrong magic bytes at the start
Found uname version: 6.0.9-300.fc37.aarch64
Michal Sekletar [Mon, 19 Dec 2022 16:29:40 +0000 (17:29 +0100)]
argv-util: do proper permission check while when changing process name
Process renaming happens very seldomly so we are able to afford proper
permission check, i.e. actually check for CAP_SYS_RESOURCE capability
instead of euid.
-1 was used everywhere, but -EBADF or -EBADFD started being used in various
places. Let's make things consistent in the new style.
Note that there are two candidates:
EBADF 9 Bad file descriptor
EBADFD 77 File descriptor in bad state
Since we're initializating the fd, we're just assigning a value that means
"no fd yet", so it's just a bad file descriptor, and the first errno fits
better. If instead we had a valid file descriptor that became invalid because
of some operation or state change, the other errno would fit better.
In some places, initialization is dropped if unnecessary.
Daan De Meyer [Thu, 15 Dec 2022 14:06:40 +0000 (14:06 +0000)]
repart: Always derive fs/luks UUIDs from generated partition UUID
When generating verity partitions, we only know the partition UUID
of the verity data and hash partition after doing the verity
formatting. This means we can't use the verity partition UUID as
input for deriving the filesystem/luks UUIDs. Currently, we derive
the filesystem/luks UUID from the null UUID instead, which isn't
ideal. Instead, let's always generate a partition UUID and use it
to derive the fs/luks UUIDs, but only use it as the actual partition
UUID if we're not doing verity for the partition.
pcrphase: gracefully exit if TPM2 support is incomplete
If everything points to the fact that TPM2 should work, but then the
driver fails to initialize we should handle this gracefully and not
cause failing services all over the place.
Alvin Šipraga [Wed, 7 Dec 2022 15:43:06 +0000 (16:43 +0100)]
network: wifi: check SSID when AP interfaces go up
When an AP goes up, the kernel may emit a netlink event indicating that
the interface has gained carrier. In that event, we should check if the
SSID has changed before attempting to reconfigure. Not doing so means
that the link->ssid member is not updated, leading to a potential
mismatch if some of the .network configurations match on SSID=.
There are however scenarios where the above heuristic is not enough.
Specifically, if the interface carrier state flip-flops within a short
enough interval, the internal throttling of netlink events inside the
kernel may suppress intermediate linkdown+linkup events (cf. Linux
net/core/link_watch.c). So there is no linkup event to react on.
To improve on the latter scenario, it is proposed to make newer kernels
emit an NL80211_CMD_START_AP multicast event when an AP goes up. This
event will not be dropped by link_watch. systemd-networkd can then react
to such events as well, and optionally reconfigure the link if the SSID
has changed. This will only work with newer kernels though.
Yu Watanabe [Tue, 15 Nov 2022 13:59:01 +0000 (22:59 +0900)]
core/unit: fix log message
As you can see in the below, the dropped dependency Before=issue-24990.service
is not logged, but the dependency Before=test1.service which is not owned by
the units generated by the TEST-26 is logged.
Before:
systemd[1]: issue-24990.service: Dependency After=test1.service dropped, merged into issue-24990.service
systemd[1]: issue-24990.service: Dependency Before=test1.service dropped, merged into issue-24990.service
After:
systemd[1]: issue-24990.service: Dependency After=test1.service is dropped, as test1.service is merged into issue-24990.service.
systemd[1]: issue-24990.service: Dependency Before=issue-24990.service in test1.service is dropped, as test1.service is merged into issue-24990.service.
Nick Rosbrook [Fri, 2 Dec 2022 20:35:25 +0000 (15:35 -0500)]
udev: attempt device rename even if interface is up
Currently rename_netif() will not attempt to rename a device if it is
already up, because the kernel will return -EBUSY unless live renaming
is allowed on the device. This restriction will be removed in a future
kernel version [1].
To cover both cases, always attempt to rename the interface and return 0
if we get -EBUSY.
Nick Rosbrook [Wed, 2 Nov 2022 09:36:14 +0000 (05:36 -0400)]
sd-netlink: restore altname on error in rtnl_set_link_name
If a current alternative name is to be used to rename a network
interface, the alternative name must be removed first. If interface
renaming fails, restore the alternative name that was deleted if
necessary.
Nick Rosbrook [Fri, 2 Dec 2022 20:26:18 +0000 (15:26 -0500)]
sd-netlink: do not swap old name and alternative name
Commit 434a348380 ("netlink: do not fail when new interface name is
already used as an alternative name") added logic to set the old
interface name as an alternative name, but only when the new name is
currently an alternative name. This is not the desired outcome in most
cases, and the important part of this commit was to delete the new name
from the list of alternative names if necessary.
Nick Rosbrook [Wed, 2 Nov 2022 15:05:01 +0000 (11:05 -0400)]
udev/net: allow new link name as an altname before renaming happens
When configuring a link's alternative names, the link's new name to-be
is not allowed to be included because interface renaming will fail if
the new name is already present as an alternative name. However,
rtnl_set_link_name will delete the conflicting alternative name before
renaming the device, if necessary.
Allow the new link name to be set as an alternative name before the
device is renamed. This means that if the rename is later skipped (i.e.
because the link is already up), then the name can at least still be
present as an alternative name.
measure: add --append= switch for merging signatures
Often it's useful to add multiple signatures in the signature JSON file
to embedd in a single .pcrsig. (For example, a signature by key X for
boot phase "enter-initrd" and one by key Y for
"enter-initrd:leave-initrd" or so). Make this easy, by adding the
ability to append signatures to a previously generated JSON file.
Use LogFilterPatterns from the unit's cgroup xattr in order to keep or
discard log messages before writing them to the journal.
When a log message is discarded, it won't be written to syslog, console...
either.
When a native, syslog, or standard output log message is received,
systemd-journald will process it if it matches against at least one
allowed pattern (if any) and none of the denied patterns (if any).