The linker hardcoded r3 into a local-dynamic to local-exec TLS
optimization sequence. This is normally the case since r3 is required
as a parameter to (the optimized out) __tls_get_addr call. However,
it is possible for a compiler, LLVM in this case, to set up the
parameter value in another register then copy it to r3 before the
call.
When fixing this problem, I noticed that ppc32 had another bug when
optimizing away one of the TLS insns to a nop.
The patch also tidies a mask used by global-dynamic to initial-exec
TLS optimization, to just select the fields needed. Leaving the
offset in the instruction wasn't a bug since it will be overwritten
anyway.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Correct GOT_TLSLD
optimization. Tidy mask for GOT_TLSGD optimization.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise. Correct
location of nop zapping high insn too.
ld/testsuite/
* ld-powerpc/tlsld.d, * ld-powerpc/tlsld.s: New test.
* ld-powerpc/tlsld32.d, * ld-powerpc/tlsld32.s: New test.
* ld-powerpc/powerpc.exp: Run them.
Andrew Burgess [Wed, 7 Jan 2015 10:51:35 +0000 (10:51 +0000)]
ld: Don't evaluate unneeded PROVIDE expressions.
When creating a linker mapfile (using -Map=MAPFILE), we previously would
always try to evaluate the expression from a PROVIDE statement.
However, this is not always safe, consider:
PROVIDE (foo = 0x10);
PROVIDE (bar = foo);
In this example, if neither 'foo' or 'bar' is needed, then while
generating the linker mapfile evaluating the expression for 'foo' is
harmless (just the value 0x10). However, evaluating the expression for
'bar' requires the symbol 'foo', which is undefined. This used to cause
a fatal error.
This patch changes the behaviour, so that when the destination of the
PROVIDE is not defined (that is the PROVIDE is not going to provide
anything) the expression is not evaluated, and instead a special string
is displayed to indicate that the linker is discarding the PROVIDE
statement.
This change not only fixes the spurious undefined symbol error, but also
means that a user can now tell if a PROVIDE statement has provided
anything by inspecting the linker mapfile, something that could not be
done before.
ld/ChangeLog:
* ldlang.c (print_assignment): Only evaluate the expression for a
PROVIDE'd assignment when the destination is being defined.
Display a special message for PROVIDE'd symbols that are not being
provided.
ld/testsuite/ChangeLog:
* ld-scripts/provide-4.d: New file.
* ld-scripts/provide-4-map.d: New file.
* ld-scripts/provide-4.t: New file.
* ld-scripts/provide-5.d: New file.
* ld-scripts/provide-5.s: New file.
* ld-scripts/provide-5-map.d: New file.
* ld-scripts/provide-5.t: New file.
* ld-scripts/provide.exp: Run the provide-4.d and provide-5.d
tests.
Andrew Burgess [Tue, 6 Jan 2015 23:40:48 +0000 (23:40 +0000)]
ld/testing: run_dump_test can now check linker mapfiles.
Add a new option 'map' to the ld run_dump_test mechanism. When the
'map' option is given run_dump_test will ensure that there is a
-Map=MAPFILE present in the linker command line, adding one if needed.
The MAPFILE is then compared with the file passed to the new 'map'
option using the regexp_diff function. This should make it slightly
easier to write tests that check the linker mapfile output.
The only test I found that already compares mapfile content is updated
to use the new mechanism.
ld/testsuite/ChangeLog:
* ld-scripts/overlay-size.d: Add 'map' option.
* ld-scripts/overlay-size.exp: Remove manual check of mapfile.
* lib/ld-lib.exp (run_dump_test): Add support for new 'map'
option, checking linker mapfile output.
Alan Modra [Sat, 17 Jan 2015 11:03:43 +0000 (21:33 +1030)]
Fix garbage collection of common symbols
Running lang_common before garbage collection means slightly less work
in garbage collection code, since common symbols should no longer
appear there. It does have the side effect of keeping linker script
symbols (at least those defined outside of sections) global too,
hence some testsuite churn.
bfd/
PR 17165
* elf-bfd.h (ELF_COMMON_DEF): Note that this might be true for
linker script assignments too.
* elflink.c (elf_gc_sweep_symbol): Don't drop ELF_COMMON_DEF syms.
(bfd_elf_gc_mark_dynamic_ref_symbol): Similarly.
ld/
PR 17165
* ldlang.c (lang_process): Run lang_common before lang_gc_sections.
ld/testsuite/
* ld-gc/pr14265.d,
* ld-cris/tls-gc-68.d,
* ld-cris/tls-gc-69.d,
* ld-cris/tls-gc-70.d,
* ld-cris/tls-gc-71.d,
* ld-cris/tls-gc-75.d,
* ld-cris/tls-gc-76.d,
* ld-cris/tls-gc-79.d,
* ld-mmix/bpo-10.d,
* ld-mmix/bpo-11.d: Update.
Alan Modra [Thu, 15 Jan 2015 08:37:33 +0000 (19:07 +1030)]
Omit section dynsyms for any linker created section
This is a simplification, and fixes a testcase I had where an empty
powerpc64 .branch_lt section was chosen for the data_index_section
dynamic symbol and thus wasn't removed.
* elflink.c (_bfd_elf_link_omit_section_dynsym): Return true for
any output section matching a linker created dynobj section.
Alan Modra [Thu, 15 Jan 2015 09:12:59 +0000 (19:42 +1030)]
Fix ARM fail of gap test
ld-elf/gap test was failing due to the ARM backend attempting to output
arch symbols when ld -s (strip all symbols) is in force. This patch
stops that happening and tidies the code a little.
PR 17842
* elflink.c (elf_link_output_sym): Assert elf_onesymtab set.
(bfd_elf_final_link): Always create a symbol table when emit_relocs.
Don't assign symtab file position unless symbols will be output.
Merge blocks with condition in common. Don't call
elf_backend_output_arch_local_syms or elf_backend_output_arch_syms
unless other symbols are output. Move assignment of symtab_shndx
file position. Localize variable.
Alan Modra [Mon, 12 Jan 2015 09:54:12 +0000 (20:24 +1030)]
Fix build without makeinfo from release binutils tar
PR 17817
* Makefile.am (aoutx.stamp): cp -p $srcdir/aoutx.texi to keep
timestamps so that makeinfo need not be installed.
(archive.stamp, archures.stamp, bfdt.stamp, cache.stamp,
coffcode.stamp, core.stamp, elf.stamp, elfcode.stamp, mmo.stamp,
format.stamp, libbfd.stamp, bfdio.stamp, bfdwin.stamp,
opncls.stamp, reloc.stamp, section.stamp, syms.stamp, targets.stamp,
init.stamp, hash.stamp, linker.stamp): Similarly.
(bfdver.texi): Use test rather than [ ] in commands.
* Makefile.in: Regenerate.
Alan Modra [Fri, 26 Dec 2014 07:56:38 +0000 (18:26 +1030)]
Delete unnecessary code copying SHF_SH5_ISA32 flag
Since 2006, commit d270463e9, _bfd_elf_copy_private_section_data has
copied over SHF_MASKOS and SHF_MASKPROC flags. That makes the buggy
code in sh_elf64_copy_private_data_internal redundant.
bfd/
PR 17755
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Delete code
copying SHF_SH5_ISA32.
binutils/testsuite/
* binutils-all/strip-11.d: New test.
* binutils-all/objcopy.exp: Run it.
Alan Modra [Wed, 24 Dec 2014 11:37:42 +0000 (22:07 +1030)]
Don't create .eh_frame_hdr on shared lib bfd
If no object files have .eh_frame, but some shared library does, then
ld creates a .eh_frame_hdr section using the shared library bfd. This
is silly since shared library .eh_frame sections don't contribute to
the output .eh_frame and thus no .eh_frame_hdr is needed.
Also, the bfd section list and count is cleared for shared libraries,
and a zero section count used as a flag in lang_check to omit a call
to bfd_merge_private_bfd_data for shared libraries. If we create a
section on a shared lib bfd then ld will wrongly attempt to merge the
shared library private bfd data.
PR 17742
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Exclude
shared libraries in loop looking for .eh_frame sections.
Similarly for build-id loop.
Alan Modra [Tue, 23 Dec 2014 08:37:23 +0000 (19:07 +1030)]
Use a symbol flag bit to mark linker defined symbols
Trying to use the SEC_LINKER_CREATED section flag to determine whether
a symbol is linker defined fails to work on targets like alpha that
define special SEC_COMMON sections. These might contain symbols that
originated in an object file.
include/
* bfdlink.h (struct bfd_link_hash_entry): Comment non_ir_ref. Add
linker_def.
bfd/
* elflink.c (_bfd_elf_define_linkage_sym): Set linker_def.
* linker.c (_bfd_generic_link_add_one_symbol): Clear linker_def
for CDEF, DEF, DEFW, COM.
ld/
* ldexp.c (exp_fold_tree_1 <etree_provide>): Test linker_def.
ld/testsuite/
* ld-powerpc/sdabase.s,
* ld-powerpc/sdabase.t,
* ld-powerpc/sdabase.d: New test.
* ld-powerpc/sdabase2.t,
* ld-powerpc/sdabase2.d: New test.
* ld-powerpc/powerpc.exp: Run them.
Alan Modra [Mon, 22 Dec 2014 04:13:49 +0000 (14:43 +1030)]
Correct logic for "defined by object"
The old code missed testing bfd_link_hash_undefweak, and wrongly
excluded bfd_link_hash_common symbols. It is also clearer to invert
the set of enum bfd_link_hash_type values tested.
bfd_link_hash_indirect and bfd_link_hash_warning will never appear
here.
Alan Modra [Mon, 22 Dec 2014 00:15:13 +0000 (10:45 +1030)]
Move support code for linker script DEFINED to ldexp.c
This moves support code for DEFINED to ldexp.c where it is used,
losing the lang_ prefix on identifiers. Two new functions are needed
to initialize and clean up to hash table, but other than that there
are no functional changes here.
Alan Modra [Fri, 12 Dec 2014 05:32:34 +0000 (16:02 +1030)]
PowerPC register numbers in DWARF
This makes gas .cfi output to .debug_frame match register numbering
emitted by gcc. md_reg_eh_frame_to_debug_frame follows the ABI,
targets not using it, notably Linux, don't.
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current
gcc behaviour.
* config/te-aix.h: New file.
* configure.tgt: Use em=aix for powerpc-aix.
Alan Modra [Fri, 12 Dec 2014 12:23:46 +0000 (22:53 +1030)]
Copy relocations against protected symbols
Copy relocs are used in a scheme to avoid dynamic text relocations in
non-PIC executables that refer to variables defined in shared
libraries. The idea is to have the linker define any such variable in
the executable, with a copy reloc copying the initial value, then have
both the executable and shared library refer to the executable copy.
If the shared library defines the variable as protected then we have
two copies of the variable being used.
Alan Modra [Thu, 11 Dec 2014 05:32:35 +0000 (16:02 +1030)]
Use autoconf check for long long in binutils
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
* configure: Regenerate.
* config.in: Regenerate.
Alan Modra [Tue, 9 Dec 2014 23:21:56 +0000 (09:51 +1030)]
Don't return DW_AT_name for function name in C++
DW_AT_name for functions typically just contains the base function
name, so lacks namespace, class and parameter information. It would
be possible to extract all these from the DWARF, but at a considerable
complication of the parser in dwarf2.c, and then you'd need to mangle
it all together. Much simpler is to look up the actual symbol. This
patch does that, avoiding the extra symbol lookup when the language
doesn't do name mangling.
PR 17541
* dwarf2.c (struct comp_unit): Add "lang".
(non_mangled): New function.
(struct funcinfo): Add "is_linkage". Reorder for better packing.
Make "name" a const char*.
(lookup_address_in_function_table): Delete functionname_ptr param.
(find_abstract_instance_name): Add is_linkage param. Set if we
have DW_AT_linkage_name or non_mangled DW_AT_name.
(scan_unit_for_symbols): Similarly set func->is_linkage.
(parse_comp_unit): Stash DW_AT_language.
(comp_unit_find_nearest_line): Replace functionname_ptr param
with function_ptr param.
(_bfd_dwarf2_find_nearest_line): Adjust above calls. Set
functionname_ptr from function->name. Call _bfd_elf_find_function
to retrieve symbol for function if not linkage name.
(_bfd_elf_find_function): Add bfd_target_elf_flavour test, moved from..
* elf.c (elf_find_function): ..here.
(_bfd_elf_find_nearest_line): Adjust calls.
* elf-bfd.h (_bfd_elf_find_function): Declare.
Alan Modra [Tue, 9 Dec 2014 04:02:22 +0000 (14:32 +1030)]
Don't sort ld -r relocs for mips
HI16/LO16 are deliberately put adjacent, which might mean relocs are
then not sorted by r_offset. See tc-mips.c:mips_frob_file. Don't undo
the HI16/LO16 sorting.
Alan Modra [Tue, 2 Dec 2014 04:39:16 +0000 (15:09 +1030)]
ppc64_elf_edit_opd revamp
This patch sorts .opd relocs (see pr17666) and allows .opd sections
with a mix of 16 and 24 byte entries to be edited.
* elf64-ppc.c (OPD_NDX): Define. Use throughout for sizing/indexing
_opd_sec_data array, halving required memory.
(sort_r_offset): New function.
(ppc64_elf_edit_opd): Sort incoming relocs. Accept .opd
sections with a mix of 16 and 24 byte OPD entries. Don't
attempt to honour --non-overlapping-opd for .opd sections with
unexpected relocs. Simplify opd entry size calculations by
first finding the reloc for the next entry. Make edit loop
handle one opd entry per iteration, with an inner loop
handling relocs per entry.
H.J. Lu [Sun, 11 Jan 2015 16:04:27 +0000 (08:04 -0800)]
Only discard space for pc-relative relocs symbols
When building PIE, we should only discard space for pc-relative relocs
symbols which turn out to need copy relocs.
bfd/
PR ld/17827
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): For PIE,
only discard space for pc-relative relocs symbols which turn
out to need copy relocs.
Matthew Wahab [Tue, 12 Jan 2016 16:35:30 +0000 (16:35 +0000)]
[ARM] Support ARMv8.2 RAS extension.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Fri, 11 Dec 2015 10:22:40 +0000 (10:22 +0000)]
[AArch64][Patch 5/5] Add instruction PSB CSYNC
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Fri, 11 Dec 2015 10:11:27 +0000 (10:11 +0000)]
[AArch64][Patch 4/5] Support HINT aliases taking operands.
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds support for aliases
of HINT which take an operand, adding a table to store operand names and
their matching hint number as well as encoding and decoding functions
for such operands. Parsing and printing the operands are deferred to any
support added for aliases with such operands.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_hint_options): Declare.
(aarch64_opnd_info): Add field hint_option.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Fri, 11 Dec 2015 09:56:07 +0000 (09:56 +0000)]
[AArch64][Patch 3/5] Adjust maximum number of instruction aliases.
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. The HINT instruction currently has 8
aliases, which is the maximum number allowed. This patch raises to 16
the limit on the number of aliases an instruction can have.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-gen.c (find_alias_opcode): Set max_num_aliases to 16.
Matthew Wahab [Fri, 11 Dec 2015 09:52:11 +0000 (09:52 +0000)]
[AArch64][Patch 2/5] Add Statistical Profiling Extension system registers.
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers. This patch adds the registers to
binutils, making them available when the architecture extension
"+profile" is enabled.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg): Add pbmlimitr_el1, pmbptr_el1,
pmbsr_el1, pmbidr_el1, pmscr_el1, pmsicr_el1, pmsirr_el1,
pmsfcr_el1, pmsevfr_el1, pmslatfr_el1, pmsidr_el1, pmscr_el2 and
pmscr_el2.
(aarch64_sys_reg_supported_p): Add architecture feature tests for
the new registers.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.s: Add tests for the statistical profiling
system registers.
* gas/aarch64/sysreg-2.d: Enable the statistical profiling
extension and update the expected output.
Matthew Wahab [Fri, 11 Dec 2015 09:30:26 +0000 (09:30 +0000)]
[AArch64][Patch 1/5] Support the ARMv8.2 Statistical Profiling Extension.
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers and a new instruction. This patch set
adds support for the extension to binutils, enabled when
-march=armv8.2-a+profile is given.
The patches in this series:
- Add the new command line option and feature flags.
- Add the new system registers.
- Adjust the maximum number of aliases permitted for an instruction.
- Add support for HINT aliases which take operands.
- Add the new instruction, an alias of the HINT instruction.
This patch adds the option "profile" to the permitted architecture
extensions, disabling it by default.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Thu, 10 Dec 2015 16:58:51 +0000 (16:58 +0000)]
[Aarch64] Support ARMv8.2 AT instructions
ARMv8.2 adds new instructions AT S1E1RP and AT S1E1WP to Aarch64. This
patch adds support for the instructions, making them available when
-march=armv8.2-a is selected.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Update for new tests for AT S1E1RP and
AT S1E1WP.
* gas/aarch64/sysreg-2.s: Add tests for AT S1E1RP and AT S1E1WP.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_at): Add "s1e1rp" and "s1e1wp".
(aarch64_sys_ins_reg_supported_p): Add ARMv8.2 system register
feature test for "s1e1rp" and "s1e1wp".
Matthew Wahab [Thu, 10 Dec 2015 16:31:35 +0000 (16:31 +0000)]
[AArch64][PATCH 1/2] Add support for ARMv8.2 DC CVAP instruction.
ARMv8.2 adds the new system instruction DC CVAP. This patch series adds
support for this instruction to binutils, enabled when -march=armv8.2-a
is selected.
The AArch64 binutils record of some system registers uses a boolean
value to hold the single flag currently supported for them. To allow
these registers to be limited to specific architectures, the first patch
in this series replaces the boolean flag with a bitset and feature test.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg): Replace has_xt with flags.
(aarch64_sys_ins_reg_has_xt): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-dis.c (aarch64_ext_regrt_sysins): Replace use of has_xt
with aarch64_sys_ins_reg_has_xt.
(aarch64_ext_sysins_op): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Likewise.
(F_HASXT): New.
(aarch64_sys_regs_ic): Update for changes to aarch64_sys_ins_reg.
(aarch64_sys_regs_dc): Likewise.
(aarch64_sys_regs_at): Likewise.
(aarch64_sys_regs_tlbi): Likewise.
(aarch64_sys_ins_reg_has_xt): New.
Matthew Wahab [Thu, 10 Dec 2015 16:01:29 +0000 (16:01 +0000)]
[AArch64][binutils] Add support for ARMv8.2 PSTATE.UAO.
ARMv8.2 adds a new control bit PSTATE.UAO. This patch adds support for
this bit to binutils, following the same basic pattern as for
PSTATE.PAN. The new control bit is only available when -march=armv8.2-a
is specified.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Thu, 10 Dec 2015 14:09:03 +0000 (14:09 +0000)]
[AArch64][PATCH 2/2] Add RAS system registers.
The ARMv8.2 RAS extension adds a number of new registers. This patch
adds the registers and makes them available whenever the RAS extension
is enabled, as it is when -march=armv8.2-a is selected.
The new registers are:
erridr_el1, errselr_el1, erxfr_el1, erxctlr, erxaddr_el1,
erxmisc0_el1, erxmisc1_el1, vsesr_el2, disr_el1 and
vdisr_el2.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for new registers.
* gas/aarch64/sysreg-2.s: Likewise. Also replace some spaces with
tabs.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "vsesr_el2", "erridr_el1",
"errselr_el1", "erxfr_el1", "erxctlr", "erxaddr_el1",
"erxmisc0_el1", "erxmisc1_el1", "disr_el1" and "vdisr_el2".
(aarch64_sys_reg_supported_p): Add architecture feature tests for
new registers.
Matthew Wahab [Thu, 10 Dec 2015 14:05:01 +0000 (14:05 +0000)]
[AArch64][PATCH 1/2] Add support for RAS instruction ESB.
The ARMv8.2 RAS extension adds a new barrier instruction ESB as an alias
and the preferred form of HINT 16.
This patch adds an architectural feature flag for the RAS extension and
includes it in the features selected enabled by -march=armv8.2-a. It
also adds the ESB instruction, making it available whenever the RAS
feature is enabled.
Because ESB is the preferred form and because the target architecture
isn't available to the disassembler, HINT 16 will be disassembled as ESB
even when the target has no support for the RAS extension.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: New.
* gas/aarch64/system-2.s: New.
* gas/aarch64/system.d: Adjust expected output for HINT 16.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Thu, 10 Dec 2015 13:58:21 +0000 (13:58 +0000)]
[AArch64] Fix ARMv8.1 and ARMv8.2 feature settings.
ARMv8.1 includes CRC as a required extension but this isn't reflected in
the features enabled by -march=armv8.1-a. The FP16 feature modifier also
clashes with AARCH64_FEATURE_V8_1 and the list of features for ARMv8.2
is missing ARMv8.1 features.
This patch enables +crc for -march values of armv8.1-a and later. It
also fixes the values for AARCH64_FEATURE_F16 and makes
AARCH64_ARCH_V8_2 and superset of AARCH64_ARCH_V8_2.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
include/opcode
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): Fix clash with
AARCH64_FEATURE_V8_1.
(AARCH64_ARCH_V8_1): Add AARCH64_FEATURE_CRC.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_CRC and
AARCH64_FEATURE_V8_1.
projects / thirdparty / binutils-gdb.git / log
