In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Tom Rini [Fri, 20 Jun 2025 18:54:41 +0000 (12:54 -0600)]
Merge patch series "Consistent Kconfig environment options CONFIG_ENV_ prefix"
Marek Vasut <marek.vasut+renesas@mailbox.org> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Marek Vasut [Mon, 9 Jun 2025 19:26:43 +0000 (21:26 +0200)]
env: Drop DELAY_ENVIRONMENT
There are no users of DELAY_ENVIRONMENT and the same effect can
be achieved either using DT /config/load-environment property,
or by using ENV_IS_NOWHERE . Remove this configuration option
and matching functionality.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:42 +0000 (21:26 +0200)]
env: Rename DEFAULT_ENV_FILE to ENV_DEFAULT_ENV_TEXT_FILE
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:41 +0000 (21:26 +0200)]
env: Rename ENV_MMC_PARTITION to ENV_MMC_SW_PARTITION
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_SW_PARTITION to clarify this is the SD/MMC software
partition table entry selector. Update the help text accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:40 +0000 (21:26 +0200)]
env: Rename SYS_MMC_ENV_PART to ENV_MMC_EMMC_HW_PARTITION
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_EMMC_HW_PARTITION to clarify this is the eMMC hardware
partition selector, not a software partition table entry selector.
Retain the ENV_MMC_ prefix to make it easier to search for all the
SD/MMC related ENV options. Update the help text accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:39 +0000 (21:26 +0200)]
env: Rename SYS_MMC_ENV_DEV to ENV_MMC_DEVICE_INDEX
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:38 +0000 (21:26 +0200)]
env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDR
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:37 +0000 (21:26 +0200)]
env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Mon, 9 Jun 2025 19:26:36 +0000 (21:26 +0200)]
env: Rename OVERWRITE_ETHADDR_ONCE to ENV_OVERWRITE_ETHADDR_ONCE
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Fri, 20 Jun 2025 14:01:16 +0000 (08:01 -0600)]
Merge patch series "bootstd: Fix efi_mgr usage in bootmeths env var"
Sam Protsenko <semen.protsenko@linaro.org> says:
Defining the 'bootmeths' environment variable with efi_mgr causes NULL
pointer dereference when running 'bootflow scan' on the E850-96 board.
This patch series fixes that, and cleans up the surrounding code a
little while at it.
Sam Protsenko [Sun, 12 Jan 2025 03:42:13 +0000 (21:42 -0600)]
bootstd: Fix incorrect struct name in bootmeth_setup_iter_order()
There is no such thing as struct bootmeth, it's probably a typo. This
issue doesn't affect the execution as it's a pointer, and pointer sizes
are the same for all data types. But it can be confusing, so make it
struct udevice, as it should be.
Fixes: a950d31abe98 ("bootstd: Add the bootmeth uclass and helpers") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
That happens because in case when 'bootmeths' env var is defined the
bootmeth_efi_mgr driver is not probed, and the memory for its private
data isn't allocated by .priv_auto. In case when 'bootmeths' env var is
not defined, the std->bootmeth_count is 0, and the execution flow in
bootmeth_setup_iter_order() takes "no ordering" path, which in turn runs
uclass_get_device_by_seq() -> ... -> device_probe(), so issue isn't
present there. But when 'bootmeths' is defined and contains efi_mgr, the
std->bootmeth_count > 0, so bootmeth_setup_iter_order() follows the "we
have an ordering" path, where devices are not probed. In other words:
'bootmeths' defined 'bootmeths' not defined
--------------------------------------------------------
priv == NULL priv != NULL
^ ^
| device_alloc_priv()
no probe device_of_to_plat()
^ device_probe()
| uclass_get_device_tail()
dev = order[i] uclass_get_device_by_seq()
^ ^
| have an ordering | no ordering
+----------------+---------------+
|
bootmeth_setup_iter_order()
bootflow_scan_first()
do_bootflow_scan()
Add an explicit device_probe() call in "we have an ordering" case to fix
the issue.
Fixes: c627cfc14c08 ("bootstd: Allow scanning for global bootmeths separately") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 20 Jun 2025 13:59:34 +0000 (07:59 -0600)]
Merge tag 'u-boot-at91-2025.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2025.10 cycle:
This feature set includes the addition of new sam9x7 SoC and a new board
named sam9x7-curiosity. There is also new support for sam9x60 compatible
at91 watchdog.
This will allow arch(s) that use device tree blobs to pad the end of the
device tree so they can be modified by board files at run time. This will
help prevent errors such as FDT_ERR_NOSPACE from occurring.
Signed-off-by: Eric Schikschneit <eric.schikschneit@novatechautomation.com>
[trini: Change default order so that X86 && EFI_APP works correctly]
clk: at91: clk-main: drop parent_name check when registering main_rc oscillator
The clk_register function logs an error if parent_name is missing from the
Device Tree.On the SAM9X7, the main_rc node is omitted to stay aligned with
the Linux Device Tree.Remove the parent_name check in at91_clk_main_rc()
to allow it to pass NULL when the parent is not specified.
Remove clock/at91.h file as it is subset of
dts/upstream/include/dt-bindings/clock/at91.h.
The constants defined in this header are being used only in dts
Zixun LI [Mon, 28 Apr 2025 09:16:26 +0000 (11:16 +0200)]
watchdog: at91sam9_wdt: Add SAM9X60 support
SAM9X60 has a slightly different watchdog implementation:
- Timer value moved into a new register WLR
- Some MR register fields have their position changed
This patch add SAM9X60 support, also adds a compatible
for SAMA5D4 which is the same as existing SAM9260.
Signed-off-by: Zixun LI <admin@hifiphile.com> Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Wed, 18 Jun 2025 18:20:41 +0000 (12:20 -0600)]
Merge patch series "Print version of the DM firmware"
Moteen Shah <m-shah@ti.com> says:
This patch series adds the functionality to print the DM firmware
version being used. Before requesting TISCI for the DM version we
first check if the DM split mode capability exists, if yes, we proceed
onto making the call to TISCI for retrieving the version information.
DM split mode capability indicates that the DM is a separate binary
altogether and has its own versioning information similar to TIFS.
Tom Rini [Wed, 18 Jun 2025 18:16:50 +0000 (12:16 -0600)]
Merge patch series "Add IPC support on MCU R5F cluster in Split Mode"
Beleswar Padhi <b-padhi@ti.com> says:
This series adds remoteproc support on MCU R5F in Split mode.
During boot, ROM can bring up the boot R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in lockstep mode,
the MCU R5F cores will run first the R5 SPL, and then once A72 comes up,
will run the Device Manager (DM) firmware. But if booted in split mode, core
0 will run DM firmware and second core sits in WFI. Shut it down so that
other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
of MCU R5 Core 1 is handled by Device Manager itself.
Tom Rini [Wed, 18 Jun 2025 18:16:29 +0000 (12:16 -0600)]
Merge patch series "bootstd: New bootmeth for RAUC A/B systems"
Martin Schwan <m.schwan@phytec.de> says:
This series implements a new bootmeth for RAUC A/B systems. RAUC (Robust
Auto Update Controller) is a lightweight update client, providing "Safe
and Secure OTA Updates for Embedded Linux". See the following links for
more information about RAUC:
PHYTEC uses RAUC in its Yocto based distribution "Ampliphy" as the
default way of updating embedded devices based on PHYTEC hardware. So
far, the logic selecting the correct partitions and files to boot was
being implemented in the U-Boot environment. While this is a
straightforward way to do it, adding and supporting new platforms became
somewhat tedious and is platform-specific. The introduction of U-Boot's
"Standard Boot" provided a convincing alternative, promising a simpler
and more portable way of booting, even for RAUC systems. This led me to
implement a new bootmeth supporting RAUC A/B systems. Note, that this
new bootmeth is not proprietary to PHYTEC products and is designed to
work on other hardware with a RAUC A/B system, too.
The bootmeth currently only supports symmetric A/B partitioning layouts.
E.g. A/rescue is not (yet) supported. The partition indexes and default
slot tries can be specified via configuration options.
For now, the bootmeth_rauc uses a similar approach for loading the
Kernel and device tree as the bootmeth_script, in that it requires a FIT
containing a U-Boot script loading the desired distro. It could be
possible to support booting without a script and load the Kernel and DT
directly with this bootmeth, but I found the script method to be very
flexible for now, in letting the distro decide what to load.
The bootmeth_rauc was tested on a phyBOARD-Pollux i.MX8M Plus [1] with
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 [2].
Supported boot devices are currently only MMC devices, but it should be
possible to add SPI flashes in the future.
To test this patch stack with PHYTEC's phyBOARD-Pollux i.MX8M Plus
board, you need to adjust the boot files to include the boot.scr.uimg
containing the distro's boot script and set "optargs" to "${raucargs}"
in it. Also disable any legacyboot in the U-Boot environment and simply
boot with Standard Boot:
Moteen Shah [Mon, 9 Jun 2025 08:14:33 +0000 (13:44 +0530)]
arm: mach-k3: Add a function for printing DM version
Add a function to print version of the DM firmware in use.
The function queries the firmware capabilities first and if
DM split mode bit is set, sends a request to TISCI for
retrieving the version information.
The DM split mode bit indicates that DM is a separate binary
altogether and hence it will have its own versioning.
Signed-off-by: Moteen Shah <m-shah@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Moteen Shah [Mon, 9 Jun 2025 08:14:31 +0000 (13:44 +0530)]
firmware: ti_sci.c: Add a function to query DM firmware's capability
Add a new function to query the capabilities of the DM firmware, using
TI SCI protocol to retrieve a 64-bit firmware capability, where each bit
represents a specific capability supported by the firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com>
Moteen Shah [Mon, 9 Jun 2025 08:14:29 +0000 (13:44 +0530)]
ti_sci_*: Add utility to access tisci firmware and SOC capability
Introduce response and request structs for receiving information
regarding FW/SOC capability from DM. The received capability can
further be used to call certain API's based on the feature supoorted
by the DM firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com>
Beleswar Padhi [Mon, 9 Jun 2025 08:14:28 +0000 (13:44 +0530)]
remoteproc: k3-r5: Acquire processor control before reset ops
Acquire processor control before doing core reset operations in probe
routine. Release the control afterwards, so that it can be acquired
during core loading operations.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Beleswar Padhi [Mon, 9 Jun 2025 08:14:27 +0000 (13:44 +0530)]
arch: mach-k3: common: Add support to shutdown MCU R5 Core 1
During boot, ROM can bring up the MCU R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in split mode,
core 0 will run DM firmware and second core sits in WFI. Add support to
shut down core 1 so that other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
request of Core 1 is handled by Device Manager itself.
Beleswar Padhi [Mon, 9 Jun 2025 08:14:26 +0000 (13:44 +0530)]
arm: mach-k3: {am6/j7}*_hardware.h: Expose MCU R5 proc and device ids
Currently the MCU R5 processor ids and device ids are only defined for
R5 SPL Stage. Expose these ids always so that A72 SPL can utilize this
information to shutdown MCU R5 Core 1 when booted in Split mode.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add support of Renesas R-Car Gen4 watchdog timer. Timeouts up to
8184.0s are supported (CKS1 register is not involved). The watchdog
uses the clock of type CLK_TYPE_GEN4_MDSEL.
The timeout is set in
dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi section &rwdt.
This driver is based on upstream linux commit: e70140ba0d2b("Get rid of 'remove_new' relic from platform driver struct")
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Wed, 18 Jun 2025 14:05:29 +0000 (08:05 -0600)]
Merge patch series "list.h/treewide: get rid of no-op prefetch()"
Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
linux/list.h: drop fallback definition of prefetch()
None of the list helpers use prefetch() anymore, and no C code relies
on getting this definition from list.h. In any case, such an arch/cpu
specific thing does not belong in a header that just consists of cpp
helper macros.
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
The use of prefetch() in these list helpers was dropped back in 2011
in linux (e66eed651fd1 ("list: remove prefetching from regular list
iterators")). No arch in U-Boot defines any actual prefetch(), and as
the referenced commit says, it's usually not a win anyway.
Whole-sale sync of list.h is not really feasible, but we can
synchronize the macros containing a prefetch() with their linux
implementations as of v6.15-rc5, also importing the various helpers
needed, e.g. list_is_head() and list_next_entry().
clk: renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()
Add support of CLK_TYPE_GEN4_MDSEL clock type to gen3_clk_get_rate64()
function. In particular, this type of clock is used by Renesas R-Car
Gen4 watchdog. It operates similarly to CLK_TYPE_GEN3_MDSEL clock.
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Stefan Roese <sr@denx.de>
Marek Vasut [Sun, 8 Jun 2025 19:04:14 +0000 (21:04 +0200)]
ARM: dts: renesas: Drop most of bootph-* tags
The bootph-* tags are now part of mainline Linux DTs as commits: f1a1268572cc ("ARM: dts: renesas: rcar-gen2: Add boot phase tags") 399f14ff6625 ("arm64: dts: renesas: rcar: Add boot phase tags") 624b2a23d46a ("arm64: dts: renesas: rzg2: Add boot phase tags")
Drop local duplicates of the same tags, as well as duplicate
property assignments which are part of the core DTs themselves.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Zixun LI [Mon, 2 Jun 2025 15:45:08 +0000 (17:45 +0200)]
usb: gadget: atmel: reliably generate disconnect by disabling controller
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Kory Maincent [Wed, 11 Jun 2025 17:10:30 +0000 (19:10 +0200)]
usb: gadget: musb: Fix duplicate ops assignment in ti_musb_peripheral
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Ivan Pang [Wed, 11 Jun 2025 05:00:38 +0000 (05:00 +0000)]
dfu: fix dev_part_str for file operations
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <ipman@amazon.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20250611050127.38011-1-ipman@amazon.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
For U-Boot to enable HS200 mode the mmc-hs200-1_8v prop must be defined
in the device tree. Linux does not seem to be affected and is able to
detect and use HS200 without this prop.
Enable use of HS200 and fix eMMC write on RK3528 by adding the missing
mmc-hs200-1_8v prop for affected boards:
Jan Čermák [Wed, 30 Apr 2025 17:15:35 +0000 (19:15 +0200)]
configs: rpi: set NR_DRAM_BANKS to 8 to accommodate RAM on 16GB models
Raspberry Pi 5 can now have up to 16 GiB of RAM where the memory spans 8
DRAM banks in total. Increase the config value to 8 to initialize the
whole RAM. Without this change, kernel only sees 8 GiB of RAM on the 16
GiB CM5 as reported in [1].
linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the
introduction of FIELD_PREP_CONST. The bug.h header changed to
build_bug.h doesn't cause any regression as we also ship split header
similar to how it's done with in Linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
arm: apple: rtkit: add missing header linux/bug.h and linux/bitops.h
The GENMASK/GENMASK_ULL macro requires inclusion of linux/bitops.h
header. It does currently work as bitfield.h includes it indirectly
but this will change when bitfield.h will be synced with new Linux
version.
Also raw printf require linux/bug.h header (also currently included
indirectly by bitfield.h)
Explicitly include the headers to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
iommu: qcom-smmu: add missing linux/bug.h header for WARN_ON
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tom Rini [Fri, 13 Jun 2025 22:57:34 +0000 (16:57 -0600)]
Merge patch series "drop volatile from global data"
Rasmus Villemoes <ravi@prevas.dk> says:
There's really no reason for the gd pointer to have the volatile
qualifier.
In fact, I claim that it's completely unnecessary and just pessimizes
code generation and forces ugly casts in lots of places. For example,
see the casts in drivers/core/tag.c where elements are added to
gd->dm_taglist, or a helper such as cyclic_get_list() that should not
be needed.
Also, it is what ends up standing in the way of an otherwise
innocent code cleanup of list.h:
https://lore.kernel.org/u-boot/20250522165656.GB2179216@bill-the-cat/
Note that riscv, x86 as well as arm64 with LTO enabled has not had
this volatile qualifier, so it's unlikely there's any generic code
that depends on it.
It's slightly ironic that riscv at very first had the gd pointer
volatile qualified [6020faf62c3 ("riscv: nx25: include: Add header
files to support RISC-V")], removed that back in 2018
[40717eb849c ("riscv: checkpatch: Fix use of volatile")], and then in
2020 this helper was added [6b9966e1aa3 ("riscv: define function
set_gd()")] which needlessly had volatile in the prototype.
The global gd pointer is no longer volatile-qualified. Callers of this
helper function have been updated to no longer use volatile-qualifed
temporary variables, so update the prototype accordingly.
arm: imx: remove unnecessary volatile qualifiers from "save gd" variables
Now that the global gd pointer is no longer volatile-qualified,
there's no reason for the temporary variables used for
saving/restoring it to have that qualifier.
The way DECLARE_GLOBAL_DATA_PTR is used, the stuff under #if 0 can
never compile as you cannot have a non-constant initializer at global
scope (and one would get linker errors as well because the 'gd' symbol
would be defined in multiple TUs).
There's a bunch of other places where this qualifier should be
dropped, e.g. in the set_gd() prototype and for various variables used
for stashing the value in the mach-imx/ directory and elsewhere. But
that will be done in follow-up patches.
Raymond Mao [Wed, 4 Jun 2025 15:48:11 +0000 (08:48 -0700)]
sandbox: solve undefined reference to pthread_kill symbol
This patch is to solve the sandbox building error:
$ make O=build-sandbox -s sandbox_defconfig
$ make O=build-sandbox -s -j2
/usr/bin/ld: /tmp/u-boot.27rzOu.ltrans58.ltrans.o: undefined reference to symbol 'pthread_kill@@GLIBC_2.2.5'
/usr/bin/ld: /lib/x86_64-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
[...]
Fixes: b989f9ed9fe1 ("test: lib: add initjmp() test") Signed-off-by: Raymond Mao <raymond.mao@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Simon Glass [Wed, 28 May 2025 12:32:08 +0000 (06:32 -0600)]
spl: Rename jump_to_image_no_args()
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()] Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 Jun 2025 22:27:02 +0000 (16:27 -0600)]
Merge patch series "ti: Add support for eCAP PWM and LCD pin mux"
Sukrut Bellary <sbellary@baylibre.com> says:
This patch series adds the support for
1. In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx. AM335X_ECAP0_IN_PWM0_OUT is used to enable the backlight.
2. Fix build warning in ti-ehrpwm driver in dev_deb().
3. Enable eCAP0 PWM and LCD pin muxing to support splash screen on
AM335x EVM[2].
per discussion on the earlier patch series,
https://lore.kernel.org/all/20250319202516.3300444-1-sbellary@baylibre.com/
dropping the device tree changes in this series due to OF_UPSTREAM
conflict.
As we are dropping the DT patch, started with the new series instead of
V2.
This series doesn't contain defconfig changes since we don't want to
enable LCD, splash screen and PWM support by default.
Enabling splash screen and PWM support in defconfig causes u-boot crash
on AM335x based beaglebone black. This will be handled in a separate
patch.
Sukrut Bellary [Fri, 30 May 2025 21:22:32 +0000 (14:22 -0700)]
board: ti: am335x: Enable eCAP0 PWM and LCD pin muxing
On AM335x EVM[1],
1. pin AM335X_ECAP0_IN_PWM0_OUT is used to enable the
backlight. ECAP0 can be configured in single channel PWM mode.
If CONFIG_PWM_TI_ECAP is enabled, perform eCAP0 pin muxing.
2. Pins LCD_DATA0 - LCD_DATA15, gpmc_ad8 - gpmc_ad15 and
lcd_vsync, lcd_sync, lcd_ac_bias_en, lcd_pclk are used for driving LCD.
If CONFIG_AM335X_LCD is enabled, perform the LCD pin muxing.
This is required to enable splash screen support on AM335x EVM.
[1] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
Sukrut Bellary [Fri, 30 May 2025 21:22:30 +0000 (14:22 -0700)]
pwm: ti: am33xx: Enable Auxiliary PWM using eCAP
In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx.
eCAP HW also supports the capture mode. Currently, this driver only
supports APWM.
This is based on the Linux kernel driver -> drivers/pwm/pwm-tiecap.c
Version: v6.12
projects / thirdparty / u-boot.git / log
