Nick Clifton [Fri, 8 Dec 2017 10:07:14 +0000 (10:07 +0000)]
Fix stripping relocs in a file with mergeable notes.
A recent Fedora bug (1520805) exposed a problem with objcopy's reloc
copying code, when a binary also contains mergeable notes. The note
merging code would delete some relocs, but then the reloc copying code
would try to put them back again, which did not work.
So I am checking in the patch below to fix the problem. The patch
also tweaks one of the binutils note merging tests so that it is
skipped for the Sparc64 target, since this has funky relocs.
binutils * objcopy.c (copy_relocations_in_section): Use the orelocations
field of the input section, if it has been initialised.
* testsuite/binutils-all/note-2-64.d: Skip test on Sparc64.
bfd * elfcode.h (elf_write_relocs): Check for an empty howto field.
Keith Seitz [Thu, 7 Dec 2017 20:59:07 +0000 (12:59 -0800)]
Validate explicit locations with early termination
breakpoints/22569 involves an internal error generated by the rather
innocent looking command:
(gdb) break -source test.cpp main
.../linespec.c:3302: internal-error: void decode_line_full(...):
Assertion `result.size () == 1 || canonical->pre_expanded' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The input string is tokenized into "-source", "test.cpp", and "main"
(input parsing breaks on whitespace). create_breakpoint is then called with
the explicit location (containing only the source file name) and "main" as
the extra_string argument.
No SaLs are created for this underspecified explicit location, and the
"result.size () == 1" evaluates false (as does the pre_expanded condition).
This triggers the assertion.
Normally string_to_explicit_location validates the input string. However,
the presence of the string "main" causes the parser to exit early:
802 else
803 {
804 /* End of the explicit location specification.
805 Stop parsing and return whatever explicit location was
806 parsed. */
807 *argp = start;
808 return location;
809 }
This bypasses the validation that is done a few lines down in this function
which would have emitted the expected error. This patch fixes that.
Additionally, this patch also fixes an inconsistency with error reporting
in this use case:
(gdb) b -source foo
Source filename requires function, label, or line offset.
(gdb) b -source foo main
No source file named foo.
These two commands should have elicited the same error message.
gdb/ChangeLog:
PR breakpoints/22569
* location.c (string_to_explicit_location): When terminating
parsing early, break out of enclosing loop instead of returning.
gdb/testsuite/ChangeLog:
PR breakpoints/22569
* gdb.linespec/ls-errs.exp: Change expected result of "break
-source this file has spaces.c -line 3".
Check that an explicit source file followed by whitespace is
identified as an invalid explicit location.
Keith Seitz [Thu, 7 Dec 2017 23:01:30 +0000 (15:01 -0800)]
Record nested types
GDB currently does not track types defined in classes. Consider:
class A
{
public:
class B
{
public:
class C { };
};
};
(gdb) ptype A
type = class A {
<no data fields>
}
This patch changes this behavior so that GDB records these nested types
and displays them to the user when he has set the (new) "print type"
option "nested-type-limit."
Example:
(gdb) set print type nested-type-limit 1
(gdb) ptype A
type = class A {
<no data fields>
class A::B {
<no data fields>
};
}
(gdb) set print type nested-type-limit 2
type = class A {
<no data fields>
class A::B {
<no data fields>
class A::B::C {
<no data fields>
};
};
}
By default, the code maintains the status quo, that is, it will not print
any nested type definitions at all.
Testing is carried out via cp_ptype_class which required quite a bit of
modification to permit recursive calling (for the nested types). This
was most easily facilitated by turning the ptype command output into a
queue. Upshot: the test suite now has stack and queue data structures that
may be used by test writers.
gdb/ChangeLog
* NEWS (New commands): Mention set/show print type nested-type-limit.
* c-typeprint.c (c_type_print_base): Print out nested types.
* dwarf2read.c (struct typedef_field_list): Rename to ...
(struct decl_field_list): ... this. Change all uses.
(struct field_info) <nested_types_list, nested_types_list_count>:
New fields.
(add_partial_symbol): Look for nested type definitions in C++, too.
(dwarf2_add_typedef): Rename to ...
(dwarf2_add_type_defn): ... this.
(type_can_define_types): New function.
Update assertion to use type_can_define_types.
Permit NULL for a field's name.
(process_structure_scope): Handle child DIEs of types that can
define types.
Copy the list of nested types into the type struct.
* gdbtypes.h (struct typedef_field): Rename to ...
(struct decl_field): ... this. Change all uses.
[is_protected, is_private]: New fields.
(struct cplus_struct_type) <nested_types, nested_types_count>: New
fields.
(TYPE_NESTED_TYPES_ARRAY, TYPE_NESTED_TYPES_FIELD)
(TYPE_NESTED_TYPES_FIELD_NAME, TYPE_NESTED_TYPES_FIELD_TYPE)
(TYPE_NESTED_TYPES_COUNT, TYPE_NESTED_TYPES_FIELD_PROTECTED)
(TYPE_NESTED_TYPES_FIELD_PRIVATE): New macros.
* typeprint.c (type_print_raw_options, default_ptype_flags): Add
default value for print_nested_type_limit.
(print_nested_type_limit): New static variable.
(set_print_type_nested_types, show_print_type_nested_types): New
functions.
(_initialize_typeprint): Register new commands for set/show
`print-nested-type-limit'.
* typeprint.h (struct type_print_options) [print_nested_type_limit]:
New field.
gdb/testsuite/ChangeLog
* gdb.cp/nested-types.cc: New file.
* gdb.cp/nested-types.exp: New file.
* lib/cp-support.exp: Load data-structures.exp library.
(debug_cp_test_ptype_class): New global.
(cp_ptype_class_verbose, next_line): New procedures.
(cp_test_ptype_class): Add and document new parameter `recursive_qid'.
Add and document new return value.
Switch the list of lines to a queue.
Add support for new `type' key for nested type definitions.
Add debugging/troubleshooting messages.
* lib/data-structures.exp: New file.
gdb/doc/ChangeLog
* gdb.texinfo (Symbols): Document "set print type nested-type-limit"
and "show print type nested-type-limit".
Tom Tromey [Fri, 3 Nov 2017 16:26:11 +0000 (10:26 -0600)]
Fix regression in "commands"
Pedro pointed out a regression in "commands", where trying to clear a
breakpoint's command list would fail:
(top-gdb) commands
Type commands for breakpoint(s) 3, one per line.
End with a line saying just "end".
>end
No breakpoints specified.
(top-gdb)
I believe the bug was introduced by my patch that changes
counted_command_line to be a shared_ptr. This causes the problem
because now the counted_command_line in commands_command_1 can be NULL,
whereas previously it never could be.
After some discussion, we agreed to simply remove the error case from
commands_command_1.
2017-12-07 Tom Tromey <tom@tromey.com>
PR breakpoints/22511:
* breakpoint.c (commands_command_1): Don't throw an exception when
no commands have been read.
2017-12-07 Tom Tromey <tom@tromey.com>
* gdb.base/break.exp: Add test for empty "commands".
Adam Stylinski [Thu, 7 Dec 2017 17:51:03 +0000 (12:51 -0500)]
Fix build with g++ 6.3.1
With g++ 6.3.1:
target-descriptions.c: In member function ‘virtual void
print_c_tdesc::visit_pre(const target_desc*)’:
target-descriptions.c:1836:16: error: types may not be defined in a
for-range-declaration [-Werror]
for (const struct bfd_arch_info *compatible : e->compatible)
^~~~~~
I think at some point the forward declaration of this struct had been
removed and declared as a typedef. This fixes that.
gdb/ChangeLog:
2017-12-07 Adam Stylinski <adam.stylinski@etegent.com>
PR c++/21222
* target-descriptions.c (print_c_tdesc::visit_pre): Change type of
range-for variable.
Yao Qi [Thu, 7 Dec 2017 17:07:01 +0000 (17:07 +0000)]
Initialize target description early in IPA
Target descriptions are allocated lazily, that is fine in GDBserver,
but it is not safe to call malloc in gdb_collect in IPA, because we
can set a fast tracepoint in malloc, and when the tracepoint is hit,
gdb_collect/malloc is called, deadlock or memory corruption may be
triggered.
#0 0xf7cfc200 in malloc ()
#1 0xf7efdc07 in operator new(unsigned int) ()
#2 0xf7ef7636 in allocate_target_description() ()
#3 0xf7efcbe1 in i386_create_target_description(unsigned long long, bool) ()
#4 0xf7efb474 in i386_linux_read_description(unsigned long long) ()
#5 0xf7efb190 in get_ipa_tdesc(int) ()
#6 0xf7ef9baa in gdb_collect ()
The fix is to initialize all target descriptions earlier, when the
IPA is loaded. In order to guarantee malloc is not called in IPA
in gdb_collect, I change the test to set a breakpoint on malloc, if
IPA gdb_collect calls malloc, program will hit the breakpoint, and
test fail.
continue
Continuing.
Thread 1 "" hit Breakpoint 5, 0xf7cfc200 in malloc ()
(gdb) FAIL: gdb.trace/ftrace.exp: advance through tracing
Simon Marchi [Thu, 7 Dec 2017 16:48:21 +0000 (11:48 -0500)]
Add virtual destructor to selftest
Clang 6 shows this warning
In file included from /home/emaisin/src/binutils-gdb/gdb/common/selftest.c:19:
In file included from /home/emaisin/src/binutils-gdb/gdb/common/common-defs.h:92:
In file included from /home/emaisin/src/binutils-gdb/gdb/common/gdb_unique_ptr.h:23:
In file included from /usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/memory:81:
/usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/unique_ptr.h:76:2: error: delete called on 'selftests::selftest' that is abstract but has non-virtual destructor [-Werror,-Wdelete-non-virtual-dtor]
delete __ptr;
^
/usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/unique_ptr.h:236:4: note: in instantiation of member function 'std::default_delete<selftests::selftest>::operator()' requested here
get_deleter()(__ptr);
^
/home/emaisin/src/binutils-gdb/gdb/common/selftest.c:57:17: note: in instantiation of member function 'std::unique_ptr<selftests::selftest, std::default_delete<selftests::selftest> >::~unique_ptr' requested here
tests[name] = std::unique_ptr<selftest> (test);
^
The error is legitimate, we (the unique_ptr) are deleting selftest
objects through the base pointer, so technically the destructor should
be virtual, so that the destructor of the subclass is invoked.
Phil Muldoon [Thu, 7 Dec 2017 16:47:33 +0000 (16:47 +0000)]
Implement explicit locations for Python breakpoints.
This introduces several new keywords to the bppy_init constructor.
The spec parameter is now optional but mutually exclusive to the
explicit keywords source, label, function and line.
gdb/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (bppy_init): Use string_to_event_location
over basic location code. Implement explicit location keywords.
(bppy_init_validate_args): New function.
* NEWS: Document Python explicit breakpoint locations.
doc/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Breakpoints In Python): Add text relating
to allowed explicit locations and keywords in gdb.Breakpoints.
testsuite/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
tests for explicit locations.
Joel Brobecker [Thu, 7 Dec 2017 13:10:33 +0000 (14:10 +0100)]
gdb/MAINTAINERS: restore m68hc11, score and xstormy16 entries
This patch restores some entries removed by a recent patch whose purpose
was to update the list of active maintainers. I thought that, the target
information was purely to document the scope of the given target, and
thus could be removed is maintainerless. But, in fact, those entries
are still useful, as a number of scripts (eg: gdb_buildall.sh) use
that information to build GDB with all targets enabled.
gdb/ChangeLog:
* MAINTAINERS: Restore target entries for m68hc11-elf,
score-elf and xstormy16-elf, incorrectly removed in a previous
patch meant to only update the list of active maintainers.
Alan Modra [Thu, 7 Dec 2017 11:16:34 +0000 (21:46 +1030)]
Objcopy interleave test
PR 22465
* testsuite/ld-elf/interleave.s: Use .data sections and provide
section attrs.
* testsuite/ld-elf/interleave.ld: Discard other sections. Adjust
for changed section names.
Pedro Alves [Wed, 6 Dec 2017 22:45:09 +0000 (17:45 -0500)]
target_set_syscall_catchpoint, use gdb::array_view and bool
I noticed that we're passing down a data/size pair to
target_ops::to_set_syscall_catchpoint. This commit makes use of
gdb::array_view instead. While at it, use bool where appropriate as
well.
gdb/ChangeLog:
* break-catch-syscall.c (insert_catch_syscall)
(remove_catch_syscall): Adjust to pass reference to
inf_data->syscalls_counts directly via gdb::array_view.
* fbsd-nat.c (fbsd_set_syscall_catchpoint): Adjust to use bool
and gdb::array_view.
* linux-nat.c (linux_child_set_syscall_catchpoint): Likewise.
* remote.c (remote_set_syscall_catchpoint): Likewise.
* target-debug.h (target_debug_print_bool): New.
(define target_debug_print_gdb_array_view_const_int): New.
* target-delegates.c: Regenerate.
* target.h (target_ops) <to_set_syscall_catchpoint>: Use
gdb::array_view and bool.
(target_set_syscall_catchpoint): Likewise.
The reason is that we are putting into the group_ptr array a pointer to
the buffer of the local string object. If the string is small enough to
fit in the internal string buffer (used for small string optimizations),
the pointer will point to the local object directly. So even if we
std::move the string to the vector, the pointer in group_ptr will still
point to the local object. When we reuse that object (technically a new
instance, but most likely the same memory) for the next syscall, we'll
overwrite the previous string. The result is that we'll get less
results than expected, since there will be duplicates.
We'll also run into problems if we push the string to the vector, and
then record the c_str () pointer using the string object in the vector.
The vector might get reallocated, the string may move in memory, and our
pointer in group_ptr will point to stale memory.
Instead, we have to push all the strings first, then, when we know the
vector won't change anymore, build the group_ptr array. This is what
this patch does.
gdb/ChangeLog:
* break-catch-syscall.c (catch_syscall_completer): Get pointers
to syscall group strings after building the string vector.
Jim Wilson [Wed, 6 Dec 2017 18:34:36 +0000 (10:34 -0800)]
Objcopy interleave fails if section address not multiple of interleave.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
Pedro Alves [Wed, 6 Dec 2017 11:28:47 +0000 (11:28 +0000)]
remote: Make qXfer packets respect corresponding "set remote foo-packet"
I've noticed that "set remote target-features-packet off" before
connecting has no effect -- GDB still fetches a target description
anyway.
The problem is that while most "set remote foo-packet" commands were
fixed by:
From 4082afcc3d1af9d8063d1c8e02deb34a8b97a489 Mon Sep 17 00:00:00 2001
From: Pedro Alves <palves@redhat.com>
Date: Fri, 25 Apr 2014 18:07:02 +0100
Subject: [PATCH] Fix several "set remote foo-packet on/off" commands.
<https://sourceware.org/ml/gdb-patches/2014-04/msg00006.html>
the "qXfer" packets where missed. This commit fixes that.
I've changed remote_search_memory too for consistency (seems like
those are the last direct references to packet->support), though the
difference is not observable because the qSearch:memory packet is auto
probed. Note gdb.base/find-unmapped.exp already exercises explicit
"set remote search-memory-packet off".
gdb/ChangeLog:
2017-12-06 Pedro Alves <palves@redhat.com>
* remote.c (remote_query_supported): Don't send "xmlRegisters=" if
"qXfer:features:read"" is disabled.
(remote_write_qxfer, remote_read_qxfer, remote_search_memory):
Check packet_config_support instead of packet->support directly.
gdb/testsuite/ChangeLog:
2017-12-06 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-avx.exp: If testing with a RSP target, check
force-disabling XML descriptions.
--
Alan Modra [Wed, 6 Dec 2017 07:02:48 +0000 (17:32 +1030)]
PR22552, readelf heap buffer overflow in load_debug_section
PR 22552
* readelf.c (process_file_header): Don't assume XINDEX case
value for e_shstrndx is within bounds.
(load_debug_section): Sanity test e_shstrndx before attempting
to read .shstrtab. Wrap long lines.
Alan Modra [Tue, 5 Dec 2017 22:56:00 +0000 (09:26 +1030)]
BFD whitespace fixes
Binutils is supposed to use tabs. In my git config I have
whitespace = indent-with-non-tab,space-before-tab,trailing-space
and I got annoyed enough seeing red in "git diff" output to fix
the problems.
Alan Modra [Mon, 4 Dec 2017 23:33:03 +0000 (10:03 +1030)]
dyn_relocs tidy
Many targets define their own dyn_relocs struct when they could use
struct elf_dyn_relocs. This patch tidies that, and uses
readonly_dynrelocs in a few more places.
The SH adjust_dynamic_symbol had some really weird code dating back to
2002 that looked over dynamic relocations for any in SEC_HAS_CONTENTS
or SEC_READONLY sections, rather than just the usual SEC_READONLY
sections. So basically any dynamic relocation. What's more, the SH
relocate_section has no support for emitting dynamic relocations in
non-PIC. In other words, SH has no support for avoiding copy relocs
in non-PIC. I've made that more obvious by using "if (0 && ..)" in
asjust_dynamic_symbol.
Unfortunately, LM32, M32R, NDS32, and OR1K copied the bogus SH
adjust_dynamic_symbol code. So none of those targets would have
avoided copy relocs. LM32, M32R, NDS32 get the "if (0)" treatment
too. (LM32 is even more broken in that non_got_ref is never set.)
OR1K relocate_section looks like it might support dynamic relocs in
non-PIC, so I've enabled the copy reloc avoidance code for that
target.
* elf32-hppa.c (struct elf32_hppa_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf32_hppa_adjust_dynamic_symbol): Comment tidy.
* elf32-lm32.c (struct elf_lm32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(lm32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-m32r.c (struct elf_m32r_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(m32r_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-metag.c (struct elf_metag_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf_metag_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-microblaze.c (struct elf32_mb_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(readonly_dynrelocs): New function.
(microblaze_elf_adjust_dynamic_symbol): Use it.
* elf32-nds32.c (struct elf_nds32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(nds32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-nios2.c (struct elf32_nios2_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
* elf32-or1k.c (struct elf_or1k_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(or1k_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-sh.c (struct elf_sh_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(sh_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-tilepro.c (struct tilepro_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilepro_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfnn-riscv.c (struct riscv_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(riscv_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-sparc.c (struct _bfd_sparc_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(_bfd_sparc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-tilegx.c (struct tilegx_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilegx_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
Simon Marchi [Tue, 5 Dec 2017 21:39:35 +0000 (16:39 -0500)]
Address review comments for the previous series
I failed at git and missed adding/lost changes on the wrong branch, the
result being that I didn't incorporate fixes resulting from Yao's review
comments. This patch fixes that.
There are two places where we should use the unique pointer typedef, and
ChangeLog entries missing.
gdb/ChangeLog:
* target-descriptions.c (struct tdesc_feature) <registers>: Use
tdesc_reg_up typedef.
(struct target_desc) <features>: Use tdesc_feature_up typedef.
Simon Marchi [Tue, 5 Dec 2017 21:30:28 +0000 (16:30 -0500)]
Split tdesc_type into multiple classes
This patch makes tdesc_type an abstract base class and creates three
subclasses:
- tdesc_type_builtin, for builtin types
- tdesc_type_vector, for vector types
- tdesc_type_with_fields, for struct, union, flag and enum types
This allows getting rid of the union in tdesc_type and to not allow the
std::vector separately. I tried to go further and create separate
classes for struct, union, flag and enum, but it proved too difficult.
One problem is that from the point of the of the target description
code, the types tdesc_type_* are opaque (only forward-declared).
Therefore, it doesn't know about inheritance relationship between those
classes. This makes it impossible to make functions that accept a
pointer to a base class and pass a pointer to a derived class, for
example. I think this patch here is a good compromise, and if somebody
wants to improve things further, the door is open.
A make_gdb_type virtual pure method is added to tdesc_type, which
replaces the current tdesc_gdb_type function. Calling this method on a
tdesc_type returns the corresponding built gdb type.
Simon Marchi [Tue, 5 Dec 2017 21:30:27 +0000 (16:30 -0500)]
Make tdesc_arch_data::arch_regs an std::vector
Make tdesc_arch_data::arch_regs be an std::vector of tdesc_arch_reg
objects.
On particularity is that the tdesc_arch_data linked to a gdbarch is
allocated on the gdbarch's obstack. To be safe, I did not change it and
called placement-new on the area returned by OBSTACK_ZALLOC.
gdb/ChangeLog:
* target-descriptions.c (tdesc_arch_reg): Remove typedef.
(struct tdesc_arch_reg): Add constructor.
(DEF_VEC_O (tdesc_arch_reg)): Remove.
(struct tdesc_arch_data): Initialize fields.
<arch_regs>: Change type to std::vector.
(target_find_description): Adjust.
(tdesc_find_type): Adjust.
(tdesc_data_init): Call tdesc_arch_data constructor.
(tdesc_data_alloc): Allocate tdesc_arch_data with new.
(tdesc_data_cleanup): Free data with delete.
(tdesc_numbered_register): Adjust.
(tdesc_find_arch_register): Adjust.
(tdesc_use_registers): Adjust.
Simon Marchi [Tue, 5 Dec 2017 21:30:26 +0000 (16:30 -0500)]
Make tdesc_type::u::u::fields an std::vector
This patch makes the tdesc_type::u::u::fields an std::vector of
tdesc_type_field. The difficulty here is that the vector is part of a
union. Because of this, I made fields a pointer to a vector, and
instantiate/destroy the vector if the type is one that uses this member
of the union
The field tdesc_type_field::name is changed to an std::string at the
same time.
gdb/ChangeLog:
* target-descriptions.c (tdesc_type_field): Remove typedef.
(DEF_VEC_O (tdesc_type_field)): Remove.
(struct tdesc_type_field): Add constructor.
<name>: Change type to std::string.
(struct tdesc_type) <tdesc_type>: Instantiate vector if the type
kind uses it.
<~tdesc_type>: Destroy vector if the type kind uses it.
<u::u::fields>: Change type to std::vector.
(tdesc_gdb_type): Adjust.
(tdesc_add_field): Adjust.
(tdesc_add_typed_bitfield): Adjust.
(tdesc_add_field): Adjust.
(tdesc_add_enum_value): Adjust.
(class print_c_tdesc) <visit>: Adjust.
Simon Marchi [Tue, 5 Dec 2017 21:30:26 +0000 (16:30 -0500)]
Make tdesc_type::name an std::string
This patch makes tdesc_type::name an std::string. This way, we don't
need to free it manually in ~tdesc_type. I think the comment on top of
name is not correct, the string is always malloc'ed.
Simon Marchi [Tue, 5 Dec 2017 21:30:25 +0000 (16:30 -0500)]
Make tdesc_feature::types an std::vector
This patch makes tdesc_feature::types an std::vector of unique_ptr of
tdesc_type. This way, we don't need to manually free the objects and
the vector in ~tdesc_feature.
Simon Marchi [Tue, 5 Dec 2017 21:30:25 +0000 (16:30 -0500)]
Make tdesc_reg string fields std::string
Make the name, group and type fields of tdesc_reg std::strings. This
way, we don't have to manually free them in ~tdesc_reg.
Doing so results in a small change in the generated tdesc. Instead of
passing an empty string for the group parameter of tdesc_create_reg, the
two modified tdesc now pass NULL. The end result should be the same.
gdb/ChangeLog:
* target-descriptions.c (struct tdesc_reg) <tdesc_reg>: Change
type of name_ parameter, adjust to std::string change.
<name, group, type>: Change type to std::string.
<~tdesc_reg>: Replace with default implementation.
<operator==>: Adjust.
(tdesc_find_register_early): Adjust.
(tdesc_register_name): Adjust.
(tdesc_register_type): Adjust.
(tdesc_register_in_reggroup_p): Adjust.
(class print_c_tdesc) <visit>: Adjust.
(class print_c_feature) <visit>: Adjust.
Simon Marchi [Tue, 5 Dec 2017 21:30:24 +0000 (16:30 -0500)]
Make tdesc_feature::registers an std::vector
This patch makes tdesc_feature::registers an std::vector of unique_ptr
to tdesc_reg. This way, we don't have to manually free the tdesc_reg
objects and the vector in the tdesc_feature destructor.
Simon Marchi [Tue, 5 Dec 2017 21:30:23 +0000 (16:30 -0500)]
Make target_desc::features an std::vector
This patch makes target_desc to be a vector of unique_ptr to
tdesc_feature objects. This way, we don't have to manually free the
features and the vector in the target_desc destructor.
Simon Marchi [Tue, 5 Dec 2017 21:30:22 +0000 (16:30 -0500)]
Make target_desc::compatible an std::vector
This patch changes target_desc::compatible to be a vector of
bfd_arch_info *. This way, we don't need to manually free the vector in
the target_desc destructor.
Simon Marchi [Tue, 5 Dec 2017 21:30:22 +0000 (16:30 -0500)]
Make target_desc::properties an std::vector
This patch changes target_desc::properties to be a vector of property
objects. This way, we don't need to manually free the property members
as well as the property objects themselves.
Simon Marchi [Tue, 5 Dec 2017 21:15:08 +0000 (16:15 -0500)]
Redefine gdb_static_assert as static_assert
Since we use C++11, we can use static_assert instead doing the trick
that makes a negative-sized array if the expression is false.
static_assert is built in the language and gives clearer error messages.
To avoid modifying the usages of gdb_static_assert, redefine
gdb_static_assert in terms of static_assert, passing an empty message.
If we want to add an assert with a message, it's always possible to use
static_assert directly.
gdb/ChangeLog:
* common/gdb_assert.h (gdb_static_assert): Redefine using
static_assert.
Sergio Lopez [Mon, 4 Dec 2017 08:17:14 +0000 (09:17 +0100)]
Implement "-a" command line option for gcore
With the new "-a" command line option, the user may request gcore to
actually dump all present memory mappings. The actual effect of this
argument is OS dependent.
On GNU/Linux, it will disable use-coredump-filter and enable
dump-excluded-mappings.
Sergio Lopez [Mon, 4 Dec 2017 08:17:12 +0000 (09:17 +0100)]
Implement 'set dump-excluded-mappings' command
Commit df8411da087dc05481926f4c4a82deabc5bc3859 implemented support for
checking /proc/PID/coredump_filter, and also changed gcore behavior to
unconditionally honor the VM_DONTDUMP flag, preventing sections marked
as such for being dumped into the core file.
This patch implements the 'set dump-excluded-mappings' command for
instructing gdb to ignore the VM_DONTDUMP flag. Combined with 'set
use-coredump-filter', this allows the user to restore the old behavior,
dumping all sections (except the ones marked as IO) unconditionally.
* linux-tdep.c (dump_excluded_mappings): New variable.
(dump_mapping_p): Use dump_excluded_mappings variable.
(_initialize_linux_tdep): New command 'set dump_excluded_mappings'.
PR gdb/22499 is about a latent bug exposed by the switch to "maint set
target-non-stop on" by default on x86-64 GNU/Linux, a while ago. With
that on, GDB is also preferring to use displaced-stepping by default.
The testcase in the bug is failing because GDB ends up incorrectly
displaced-stepping over a RIP-relative VEX-encoded instruction, like
this:
While RIP-relative instructions need adjustment when relocated to the
scratch pad, GDB ends up just copying VEX-encoded instructions to the
scratch pad unmodified, with the end result that the inferior ends up
executing an instruction that fetches/writes memory from the wrong
address...
This patch teaches GDB about the VEX-encoding prefixes, fixing the
problem, and adds a testcase that fails without the GDB fix.
I think we may need a similar treatment for EVEX-encoded instructions,
but I didn't address that simply because I couldn't find any
EVEX-encoded RIP-relative instruction in the gas testsuite. In any
case, this commit is forward progress as-is already.
gdb/ChangeLog:
2017-12-04 Pedro Alves <palves@redhat.com>
PR gdb/22499
* amd64-tdep.c (amd64_insn::rex_offset): Rename to...
(amd64_insn::enc_prefix_offset): ... this, and tweak comment.
(vex2_prefix_p, vex3_prefix_p): New functions.
(amd64_get_insn_details): Adjust to rename. Also skip VEX2 and
VEX3 prefixes.
(fixup_riprel): Set VEX3.!B.
gdb/testsuite/ChangeLog:
2017-12-04 Pedro Alves <palves@redhat.com>
PR gdb/22499
* gdb.arch/amd64-disp-step-avx.S: New file.
* gdb.arch/amd64-disp-step-avx.exp: New file.
Pedro Alves [Sun, 3 Dec 2017 17:50:43 +0000 (12:50 -0500)]
Make make-target-delegates grok namespace scope op and template params
The next patch will want to use gdb::array_view<int> as parameter type
of a target_ops method. However, that runs into a
make-target-delegates limitation: target_debug_foo calls in
target-delegates.c for parameters/return types with namespace scope
operators ("::") or template parameters, end up looking like:
@@ -1313,9 +1313,7 @@ debug_set_syscall_catchpoint (struct target_ops *self, int arg1, int arg2, int a
fputs_unfiltered (", ", gdb_stdlog);
target_debug_print_int (arg3);
fputs_unfiltered (", ", gdb_stdlog);
- target_debug_print_int (arg4);
- fputs_unfiltered (", ", gdb_stdlog);
- target_debug_print_int_p (arg5);
+ target_debug_print_gdb::array_view<const_int> (arg4);
which obviously isn't something that compiles. The problem is that
make-target-delegates wasn't ever taught that '::', '<', and '>' can
appear in parameter/return types. You could work around it by hidding
the unsupported characters behind a typedef in the target method
declaration, or by using an explicit TARGET_DEBUG_PRINTER, but it's
better to just remove the limitation.
While at it, also fix an "abuse" of reserved identifiers.
gdb/ChangeLog:
* make-target-delegates (munge_type): Also munge '<', '>', and
':'. Avoid double underscores in identifiers, and trailing
underscores.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p__p): Rename to
...
(target_debug_print_VEC_static_tracepoint_marker_p_p): ... this.
* target-delegates.c: Regenerate.
Pedro Alves [Sun, 3 Dec 2017 15:32:08 +0000 (15:32 +0000)]
Fix gdb.threads/process-dies-while-detaching.exp
I noticed [1] a test bug in gdb.threads/process-dies-while-detaching.exp.
Simplified, the test code in question looks somewhat like this:
~~~
# Detach from a process, and ensure that it exits after detaching.
# This relies on inferior I/O.
proc detach_and_expect_exit {test} {
gdb_test_multiple "detach" $test ....
set saw_prompt 0
set saw_inf_exit 0
while { !$saw_prompt && !$saw_inf_exit } {
gdb_test_multiple "" $test {
-re "exited, status=0" {
set saw_inf_exit 1
}
-re "$gdb_prompt " {
set saw_prompt 1
}
}
}
pass $test
}
~~~
The bug is in the while loop's condition. We want to make sure we see
both the inferior output and the prompt, so the loop's test should be:
- while { !$saw_prompt && !$saw_inf_exit } {
+ while { !$saw_prompt || !$saw_inf_exit } {
If we just fix that, the test starts failing though, because it
exposes a couple latent problems:
- When called from test_detach_killed_outside, the parent doesn't
print "exited, status=0", because in that case the child dies with a
signal, and so detach_and_expect_exit times out.
Fix it by making the parent print "signaled, sig=9" in that case,
and have the .exp expect it.
- When testing against --target_board=native-gdbserver, sometimes we'd
get this:
ERROR: Process no longer exists
ERROR: : spawn id exp9 not open
while executing
"expect {
-i exp8 -timeout 220
-i $server_spawn_id
eof {
pass $test
wait -i $server_spawn_id
unset server_spawn_id
}
timeout {
..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp9 not open
The problem is that:
- inferior_spawn_id and server_spawn_id are the same when testing
with gdbserver.
- gdbserver exits after "detach", so we get an eof for
$inferior_spawn_id in the loop in detach_and_expect_exit.
That's the first "ERROR: Process no longer exists".
- and then when we reach test_server_exit, server_spawn_id
is already closed (because server_spawn_id==inferior_spawn_id).
To handle this, make the loop in detach_and_expect_exit use an
indirect spawn id list and remove $inferior_spawn_id from the list
as soon as we got the inferior output we're expecting, so that the
"eof" is left unprocessed until we reach test_server_exit.
[1] I changed GDB in a way that should have made the test fail, but it
didn't.
gdb/testsuite/ChangeLog:
2017-12-03 Pedro Alves <palves@redhat.com>
* gdb.threads/process-dies-while-detaching.c: Include <errno.h>
and <string.h>.
(parent_function): Print distinct messages when waitpid fails, or
the child exits with a signal, or the child exits for an unhandled
reason.
* gdb.threads/process-dies-while-detaching.exp
(detach_and_expect_exit): New 'inf_output_re' parameter and use
it. Wait for both inferior output and GDB's prompt. Use an
indirect spawn id list.
(do_detach): New parameter 'child_exit'. Use it to compute
expected inferior output.
(test_detach, test_detach_watch, test_detach_killed_outside):
Adjust to pass down the expected child exit kind.
Simon Marchi [Sun, 3 Dec 2017 01:36:39 +0000 (20:36 -0500)]
Remove usages of find_inferior calling not_stopped_callback
Replace with find_thread. Writing a lambda inline in directly in the if
conditions would be a bit messy, so I chose to assign them to variables
instead.
gdb/gdbserver/ChangeLog:
* linux-low.c (not_stopped_callback): Return bool, take filter
argument directly.
(linux_wait_for_event_filtered): Use find_thread.
(linux_wait_1): Likewise.
Simon Marchi [Sun, 3 Dec 2017 01:36:38 +0000 (20:36 -0500)]
Remove usage of find_inferior in find_lwp_pid
Replace with find_thread. We could almost use find_thread_ptid, except
that find_lwp_pid uses the pid of the input ptid of the lwp is 0, so the
behavior is not quite the same.
gdb/gdbserver/ChangeLog:
* linux-low.c (same_lwp): Remove.
(find_lwp_pid): Use find_thread.
Simon Marchi [Sun, 3 Dec 2017 01:36:34 +0000 (20:36 -0500)]
Remove find_inferior_id
Remove find_inferior_id, replacing its usages with find_thread_ptid.
find_thread_ptid was implemented using find_inferior_id, so move the
implementation there instead.
Simon Marchi [Sun, 3 Dec 2017 01:36:32 +0000 (20:36 -0500)]
Remove usage of find_inferior in regcache_invalidate_pid
Replace with for_each_thread with pid filtering.
regcache_invalidate_one is not longer needed, as it was only used to
filter the pid. We can call regcache_invalidate_thread directly.
gdb/gdbserver/ChangeLog:
* regcache.c (regcache_invalidate_one): Remove.
(regcache_invalidate_pid): use for_each_thread.
Cary Coutant [Wed, 15 Feb 2017 08:25:29 +0000 (00:25 -0800)]
Disallow --incremental with -pie and force -no-pie for incremental tests.
This is a partial fix for the gold testsuite failures documented in
PR 21090. The use of -fpie triggers some mov-to-lea optimizations that
are not compatible with incremental linking, so those optimizations need
to be disabled. We also diagnose the attempt to use -pie with incremental
linking, and force -no-pie for the incremental tests in case the build has
been configured to have GCC pass -pie all the time.
We still have a problem where compiling with -fpie results in some GOT
entries even when linking with -no-pie. This combination still causes test
failures because we are not updating the GOT entries in an incremental update
link.
Cary Coutant [Sat, 2 Dec 2017 06:03:09 +0000 (22:03 -0800)]
Fix incremental linking failure with GCC 7+.
With the new compiler, we're running out of patch space for the .eh_frame
section. To workaround that issue, we compile the before and after versions
both with no unwind tables.
gold/
PR gold/22309
* testsuite/Makefile.am (two_file_test_1_v1_ndebug.o): Compile with
no EH information.
(two_file_test_1_ndebug.o): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1.cc: Touch to force recompilation with new
flags.
* testsuite/two_file_test_1_v1.cc: Likewise.
The purpose of this concept is to turn the load of debugging
information off, either globally (via the '--readnever' option), or
objfile-specific. The implementation proposed here is an extension of
the patch distributed with Fedora GDB; looking at the Fedora patch
itself and the history, one can see some reasons why it was never
resubmitted:
- The patch appears to have been introduced as a workaround, at
least initially;
- The patch is far from perfect, as it simply shunts the load of
DWARF debugging information, without really worrying about the
other debug format.
- Who really does non-symbolic debugging anyways?
One use of this feature is when a user simply wants to do the
following sequence: attach, dump core, detach. Loading the debugging
information in this case is an unnecessary cause of delay.
This patch expands the version shipped with Fedora GDB in order to
make the feature available for all the debuginfo backends, not only
for DWARF. It also implements a per-objfile flag which can be
activated by using the "-readnever" command when using the
'add-symbol-file' or 'symbol-file' commands.
It's also worth mentioning that this patch tests whether GDB correctly
fails to initialize if both '--readnow' and '--readnever' options are
passed.
Tested on the BuildBot.
gdb/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0: Mention new '--readnever'
feature.
* coffread.c (coff_symfile_read): Do not map over sections with
'coff_locate_sections' if readnever is on.
* dwarf2read.c (dwarf2_has_info): Return 0 if
readnever is on.
* elfread.c (elf_symfile_read): Do not map over sections with
'elf_locate_sections' if readnever is on.
* main.c (validate_readnow_readnever): New function.
(captured_main_1): Add support for --readnever.
(print_gdb_help): Document --readnever.
* objfile-flags.h (enum objfile_flag) <OBJF_READNEVER>: New
flag.
* symfile.c (readnever_symbol_files): New global.
(symbol_file_add_with_addrs): Set 'OBJF_READNEVER' when
'READNEVER_SYMBOL_FILES' is set.
(validate_readnow_readnever): New function.
(symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(add_symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(_initialize_symfile): Document new '-readnever' option for
both 'symbol-file' and 'add-symbol-file' commands.
* top.h (readnever_symbol_files): New extern global.
* xcoffread.c (xcoff_initial_scan): Do not read debug
information if readnever is on.
gdb/doc/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (File Options): Document --readnever.
(Commands to Specify Files): Likewise, for 'symbol-file' and
'add-symbol-file'.
gdb/testsuite/ChangeLog:
2017-12-01 Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/readnever.c, gdb.base/readnever.exp: New files.
Make '{add-,}symbol-file' not care about the position of command line arguments
This is a bug that's been detected while doing the readnever work.
If you use 'symbol-file' or 'add-symbol-file', the position of each
argument passed to the command matters. This means that if you do:
(gdb) symbol-file -readnow /foo/bar
The symbol file specified will (correctly) have all of its symbols
read by GDB (because of the -readnow flag). However, if you do:
(gdb) symbol-file /foo/bar -readnow
GDB will silently ignore the -readnow flag, because it was specified
after the filename. This is not a good thing to do and may confuse
the user.
To address that, I've modified the argument parsing mechanisms of
symbol_file_command and add_symbol_file_command to be
"position-independent". I have also added one error call at the end
of add_symbol_file_command's argument parsing logic, which now clearly
complains if no filename has been specified. Both commands now
support the "--" option to stop argument processing.
This patch provides a testcase for both commands, in order to make
sure that the argument order does not matter. It has been
regression-tested on BuildBot.
* symfile.c (symbol_file_command): Call
'symbol_file_add_main_1' only after processing all command
line options.
(add_symbol_file_command): Modify logic to make arguments
position-independent.
Joel Brobecker [Fri, 1 Dec 2017 20:45:30 +0000 (15:45 -0500)]
(Ada) GDB crash printing expression with type casting
One of our users reported that trying to print the following expression,
caused GDB to SEGV:
(gdb) print some_package.some_type (val)
In this particular instance, the crash occurred inside ada_args_match
because it is given a NULL "func", leading to the SEGV because of:
struct type *func_type = SYMBOL_TYPE (func);
This NULL symbol comes from a list of symbols which was given to
ada_resolve_function (parameter called "syms") which then iterates
over each of them to discard the ones that don't match the actuals:
for (k = 0; k < nsyms; k += 1)
{
struct type *type = ada_check_typedef (SYMBOL_TYPE (syms[k].symbol));
What's really interesting is that, when entering the block above for
the first time, all entries in SYMS have a valid (non-NULL) symbol.
However, once we return from the call to ada_check_typedef, the first
entry of our SYMS table gets set to all zeros:
(gdb) p syms[0]
$2 = {symbol = 0x0, block = 0x0}
Hence the call to ada_args_match with a NULL symbol, and the ensuing
SEGV.
To find out why this happen, we need to step back a little and look
at how syms was allocated. This list of symbols comes from a symbol
lookup, which means ada_lookup_symbol_list_worker. We have our first
hint when we look at the function's documentation and see:
This vector is transient---good only to the next call of
ada_lookup_symbol_list.
Implementation-wise, this is done by using a static global obstack,
which we just re-initialize each time ada_lookup_symbol_list_worker
gets called:
This property was probably established in order to facilitate the use
of the returned vector, since the users of that function would not have
to worry about releasing that memory when no longer needed. However,
I found during this investigation that it is all to easy to indirectly
trigger another symbol lookup while still using the results of a previous
lookup.
In our particular case, there is the call to ada_check_typedef, which
leads to check_typedef. As it happens, my first symbol had a type which
was a typedef to a stub type, so check_typedef calls lookup_symbol to
find the non-stub version. This in turn eventually leads us back to
ada_lookup_symbol_list_worker, where the first thing it does is free
the memory area when our list of symbols have been residing and then
recreates a new one. in other words, SYMS then becomes a dangling
pointer!
This patch fixes the issue by having ada_lookup_symbol_list_worker
return a copy of the list of symbols, with the responsibility of
deallocating that list now transfered to the users of that list.
More generally speaking, it is absolutely amazing that we haven't seen
consequences of this issue before. This can happen fairly frequently.
For instance, I found that ada-exp.y::write_var_or_type calls
ada_lookup_symbol_list, and then, while processing that list, calls
select_possible_type_sym, which leads to ada_prefer_type, eventually
leading to ada_check_typedef again (via eg. ada_is_array_descriptor_type).
Even more amazing is the fact that, while I was able to produce multiple
scenarios where the corruption occurs, none of them leads to incorrect
behavior at the user level. In other words, it requires a very precise
set of conditions for the corruption to become user-visible, and
despite having a megalarge program where the crash occured, using that
as a template for creating a reproducer did not work (pb goes away).
This is why this patch does not come with a reproducer. On the other hand,
this should not be a problem in terms of testing coverage, as the changes
are made in common areas which, at least for the most part, are routinely
exercised during testing.
gdb/ChangeLog:
* ada-lang.c (symbol_list_obstack): Delete.
(resolve_subexp): Make sure "candidates" gets xfree'ed.
(ada_lookup_symbol_list_worker): Remove the limitation that
the result is only good until the next call, now making it
the responsibility of the caller to free the result when no
longer needed. Adjust the function's intro comment accordingly.
(ada_lookup_symbol_list): Adjust the function's intro comment.
(ada_iterate_over_symbols): Make sure "results" gets xfree'ed.
(ada_lookup_encoded_symbol, get_var_value): Likewise.
(_initialize_ada_language): Remove symbol_list_obstack
initialization.
* ada-exp.y (block_lookup): Make sure "syms" gets xfree'ed.
(write_var_or_type, write_name_assoc): Likewise.
Fix internal error from command line with unbalanced --start-lib/--end-lib.
The problem is that while the command line isn't trivially empty,
it contains no input files. As gold tries to configure the number
of threads to use based on the number of input files, this causes
the assertion failure above. Fix this problem by making the logic
in gold.cc more robust and also adding a better error message
about --start-lib to options.cc.
gold/
PR gold/22406
* gold.cc (queue_initial_tasks) Check for number of real input files.
* options.cc (Command_line::process) Check for unterminated --start-lib
options.
* testsuite/Makefile.am: Add new test script.
* testsuite/Makefile.in: Regenerate.
* testsuite/check_empty_command_lines.sh: New test script.
Stephen Crane [Fri, 1 Dec 2017 20:10:02 +0000 (12:10 -0800)]
Fix problem where undef can fail to trigger archive rescan.
If a shared library contains an undefined symbol and LTO adds
a new reference to that same undefined symbol, the reference in the new
object added by the plugin would not trigger a rescan of the archive
containing the symbol.
2017-11-17 Stephen Crane <sjc@immunant.com>
gold/
PR gold/22448
* symtab.cc (Symbol_table::add_from_object): Only rescan for
undefined symbols in regular, not dynamic, objects.
The purpose of this concept is to turn the load of debugging
information off, either globally (via the '--readnever' option), or
objfile-specific. The implementation proposed here is an extension of
the patch distributed with Fedora GDB; looking at the Fedora patch
itself and the history, one can see some reasons why it was never
resubmitted:
- The patch appears to have been introduced as a workaround, at
least initially;
- The patch is far from perfect, as it simply shunts the load of
DWARF debugging information, without really worrying about the
other debug format.
- Who really does non-symbolic debugging anyways?
One use of this feature is when a user simply wants to do the
following sequence: attach, dump core, detach. Loading the debugging
information in this case is an unnecessary cause of delay.
This patch expands the version shipped with Fedora GDB in order to
make the feature available for all the debuginfo backends, not only
for DWARF. It also implements a per-objfile flag which can be
activated by using the "-readnever" command when using the
'add-symbol-file' or 'symbol-file' commands.
It's also worth mentioning that this patch tests whether GDB correctly
fails to initialize if both '--readnow' and '--readnever' options are
passed.
Tested on the BuildBot.
gdb/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0: Mention new '--readnever'
feature.
* coffread.c (coff_symfile_read): Do not map over sections with
'coff_locate_sections' if readnever is on.
* dwarf2read.c (dwarf2_has_info): Return 0 if
readnever is on.
* elfread.c (elf_symfile_read): Do not map over sections with
'elf_locate_sections' if readnever is on.
* main.c (validate_readnow_readnever): New function.
(captured_main_1): Add support for --readnever.
(print_gdb_help): Document --readnever.
* objfile-flags.h (enum objfile_flag) <OBJF_READNEVER>: New
flag.
* symfile.c (readnever_symbol_files): New global.
(symbol_file_add_with_addrs): Set 'OBJF_READNEVER' when
'READNEVER_SYMBOL_FILES' is set.
(validate_readnow_readnever): New function.
(symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(add_symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(_initialize_symfile): Document new '-readnever' option for
both 'symbol-file' and 'add-symbol-file' commands.
* top.h (readnever_symbol_files): New extern global.
* xcoffread.c (xcoff_initial_scan): Do not read debug
information if readnever is on.
gdb/doc/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (File Options): Document --readnever.
(Commands to Specify Files): Likewise, for 'symbol-file' and
'add-symbol-file'.
gdb/testsuite/ChangeLog:
2017-12-01 Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/readnever.c, gdb.base/readnever.exp: New files.
Tom Tromey [Thu, 30 Nov 2017 18:49:27 +0000 (11:49 -0700)]
Fix dependency tracking for objects in subdirectories
On irc, Pedro pointed out that dependencies for objects in
subdirectories didn't seem to be working.
The bug was that the "-include" for .deps files was using the wrong file
name for subdirectory objects; e.g., for cli/cli-decode.o it was trying
to open .deps/cli/cli-decode.o, whereas the correct file is
cli/.deps/cli-decode.o.
This patch changes how the dep files are found. Tested by touching a
source file and rebuilding cli/cli-decode.o.
2017-12-01 Tom Tromey <tom@tromey.com>
* Makefile.in (all_deps_files): New variable.
Include .Po files using all_deps_files.