* create a parent device for all EFI block devices
* move lmb_map_update_notify() to EFI
* make efi_add_memory_map_pg() static
* remove comparisons to string literals from runtime
* ix potential deref-after-null
Other:
* avoid superfluous value check in lmb_map_update_notify()
* support more efi protocols in uuid_guid_get_str()
Please pull the fixes for rockchip platform:
- Fix for rk3399 bob and kevin
- Fix for sdram more than 4GB
- Fix for dwc_eth on rk356x/rk3588
- Fix for sdmmc access on rk33080rock-s9
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <1425075683@qq.com> Acked-by: Liya Huang <1425075683@qq.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
efi_driver: create a parent device for all EFI block devices
Up to now root has been the parent device for all block devices created via
calling ConnectController(). This does not work well together with the
implementation of bootstd.
Add a dummy parent device for all EFI block devices.
With this change EFI block devices are also accessible via commands like
'cat', 'load', and 'ls'.
Ilias Apalodimas [Fri, 14 Feb 2025 13:46:45 +0000 (15:46 +0200)]
efi_loader: remove comparisons to string literals from runtime
For EFI runtime services, we manage to preserve string literals
by placing the .efi_runtime section just before .data and preserving
it when marking the runtime memory by marking surrounding boottime
code as runtime. This is ok for now but will break if we update any
linker scripts and decouple .text and .runtime sections.
So let's define the strings we used to compare in the appropriate
section for runtime services
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Jonas Karlman [Tue, 4 Feb 2025 21:38:43 +0000 (21:38 +0000)]
arm64: dts: rockchip: Fix sdmmc access on rk3308-rock-s0 v1.1 boards
BootROM leave GPIO4_D6 configured as SDMMC_PWREN function and DW MCI
driver set PRWEN high on MMC_POWER_UP and low on MMC_POWER_OFF.
Similarly U-Boot also set PRWEN high before accessing mmc.
However, HW revision prior to v1.2 must pull GPIO4_D6 low to access
sdmmc. For HW revision v1.2 the state of GPIO4_D6 has no impact.
Model an always-on active low fixed regulator using GPIO4_D6 to fix
use of sdmmc on older HW revisions of the board.
Jonas Karlman [Sun, 9 Feb 2025 23:27:56 +0000 (23:27 +0000)]
net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK3588
When rgmii-rxid/txid/id phy-mode is used the MAC should not add RX
and/or TX delay. Currently RX/TX delay is configured as enabled using
zero as delay value for the rgmii-rxid/txid/id modes.
Change to disable RX and/or TX delay and using zero as delay value.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Sun, 9 Feb 2025 23:27:55 +0000 (23:27 +0000)]
net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x
When rgmii-rxid/txid/id phy-mode is used the MAC should not add RX
and/or TX delay. Currently RX/TX delay is configured as enabled using
zero as delay value for the rgmii-rxid/txid/id modes.
Change to disable RX and/or TX delay and using zero as delay value.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Mon, 6 Jan 2025 21:39:42 +0000 (21:39 +0000)]
pinctrl: rockchip: rk3328: Fix pinmux for GPIO2-B and GPIO3-B pins
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged. Add missing GPIO3-B1 to GPIO3-B7
pinmux data to rk3328_mux_recalced_data as mux register offset for these
pins does not follow rockchip convention.
This matches changes in following Linux commits:
- e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
- 5ef6914e0bf5 ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins")
- 128f71fe014f ("pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Sun, 12 Jan 2025 22:27:29 +0000 (22:27 +0000)]
rockchip: rk3288: Use rk3288-cru.h from dts/upstream
clock/rk3288-cru.h in include/dt-bindings is almost identical to the
version in dts/upstream, remove the copy from include/dt-bindings to
only use the version from dts/upstream.
One clk, SCLK_MAC_PLL, is not part of the upstream bindings, this clk is
not used by upstream, in-tree or vendor DTs and can safely be dropped.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Thu, 30 Jan 2025 22:07:11 +0000 (22:07 +0000)]
rockchip: sdram: Allow the first bank to extend beyond 4 GiB
Allow the first bank to extend beyond 4 GiB when the blob of space for
peripheral is located before start of DRAM, e.g. when start of DRAM
is 0x40000000 and continue beyond the 4 GiB mark.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add the dram_init_banksize function to the board file to properly set
DRAM memory sizes during boot.
The commit bc07851897bd ("board: ti: Pull redundant DDR functions to a
common location and Fixup DDR size when ECC is enabled") relocated the
dram_init_banksize function from architecture specific initialization to
the TI board initialization code. As a result, boards relying on the
previous setup now require this function to be defined within their
board file to handle DRAM sizing correctly.
Without this function defined the following error appears during boot:
ERROR: Failed to allocate 0x1000 bytes below 0x0.
Fixes: bc07851897bd ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The PRNG implementing the random() function only has 2^31 states and
therefore is unsafe to use for cryptography. Use arc4random() instead.
Fixes: cc34f04efd63 ("tools: image-host.c: use random instead of rand")
Addresses-Coverity-ID: 312953 Calling risky function Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Udit Kumar [Tue, 11 Feb 2025 17:51:58 +0000 (23:21 +0530)]
power: regulator: tps65941: Fix voltage calculation for ldo
As per TRM[0] Section 8.7.1 "TPS6594-Q1 Registers", LDOx_Vout
bit 6-1, define the NVM voltage settings.
Along side table 8-4 of above TRM, shows voltage to value mapping.
Driver wrongly using bits 5-1 to calculate voltage, and to convert
voltage to value driver was using buck's calculation.
So fix those calculation.
Fixes: 5d7dbd22cf7d ("power: regulator: tps65941: use function callbacks for conversion ops") Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tom Rini [Sun, 16 Feb 2025 16:29:03 +0000 (10:29 -0600)]
Gitlab: Add missing symlink for qemu_arm64_lwip boardenv file
When adding the symlink for the conf file so qemu_arm64_lwip uses
qemu_arm64 configuration information, the symlink for the boardenv file
was missed in Gitlab (but not Azure). Add that in now.
Fixes: fd10d156db3f ("CI: add qemu_arm64_lwip to the test matrix") Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 15 Feb 2025 21:29:20 +0000 (15:29 -0600)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sh
Add empty weak assembler function armv8_switch_to_el2_prep() which is
jumped to just before U-Boot determines which EL it is running in and
decides which path to take to boot the Linux kernel. Add
IH_TYPE_TFA_BL31 into supported images type, to allow implementation of
board specific U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TFA_BL31, ...) TFA
BL31 loadable handler for fitImages.
This PR contains common hooks which are noop, R-Car Gen4 board specific
implementation using these hooks is coming in next PR.
Marek Vasut [Wed, 29 Jan 2025 21:59:19 +0000 (22:59 +0100)]
image: Add support for starting TFA BL31 as fitImage loadables
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
Marek Vasut [Wed, 29 Jan 2025 21:59:18 +0000 (22:59 +0100)]
arm64: Add late jump to kernel board hook
Add empty weak assembler function armv8_switch_to_el2_prep() which is
jumped to just before U-Boot determines which EL it is running in and
decides which path to take to boot the Linux kernel.
This weak function is meant to be used by architecture specific code
to implement jump to a firmware blob, which then returns right past
this weak function and continues execution of U-Boot code which then
boots the Linux kernel. One example of such use case is when U-Boot
jump tp TFA BL31, which switches from EL3 to EL2 and then returns to
U-Boot code newly running in EL2 and starts the Linux kernel.
The weak function is called with caches already disabled and DM shut
down. Any preparatory work or even loading of more data must be done
in board_prep_linux(), this hook is meant only for the final jump to
the firmware and return to U-Boot before booting Linux.
Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
ZHANG Yuntian [Tue, 11 Feb 2025 07:30:27 +0000 (15:30 +0800)]
mbedtls/external: remove broken git submodule
When we squash imported mbedtls, the git submodule "framework" was
preserved in the commit. However, U-Boot itself does not use git
submodule, and provides no .gitmodules file to specify the submodule
repository.
This is normally not an issue when cloning U-Boot repository. However,
when U-Boot is imported as a submodule, this will break git option
`--recurse-submodules` as it fails to resolve "framework".
As we do not use the submodule, remove it to unbreak existing workflows.
Svyatoslav Ryhel [Sat, 28 Dec 2024 13:21:03 +0000 (15:21 +0200)]
board: transformer-t30: fix model detection
PCBID1 seems to be high not only on TF600T, but on TF700T as well,
that caused boot failure for TF700T. Switching PCBID1 to PCBID7
should fix this issue.
Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
net-lwip:
* Fix incorrect selection of ethernet device on boards having more than
one
* Fix TFTP option processing
* Make the WGET_HTTPS Kconfig symbol depend on DM_RNG
net/lwip/wget.c/mbedtls_hardware_poll() is calling dm_rng_read() but
dependency is not recorded anywhere that's why depend on DM_RNG
when WGET_HTTPS is used.
Suggested-by: Michal Simek <michal.simek@amd.com> Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Michal Simek <michal.simek@amd.com>
Find_option() is used to retrieve the block size value in an option
acknowledgment in response to a request containing a block size option
according to RFC2348.
The format of an OACK response is described in RFC2347 as
The current implementation of find_option() only works if
* blksize is the first option
* lwip_strnstr() ignores the length parameter,
i.e. is implemented via strstr()
The OACK messages starts with 0x00 0x06. If 'blksize' is the first option,
strstr() reports a match when the first parameter points to 0x06. Adding
the string length of 'blksize' plus 2 to the location of the 0x06 byte
points to the value.
Find_option() would report a match for option 'blksize' if the response
contained an option called 'foo_blksize_bar'. In this case find_option()
would return 'bar' as the value string.
If 'blksize' were the second option, find_option() would return a pointer
to the second character of the value string.
Furthermore find_option() does not detect if the value string is NUL
terminated. This may lead to a buffer overrun.
Provide an implementation that correctly steps from option to option.
Fixes: 27d7ccda94fa ("net: lwip: tftp: add support of blksize option to client") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (qemu_arm64_lwip) Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Jerome Forissier [Thu, 30 Jan 2025 08:22:20 +0000 (09:22 +0100)]
net: lwip: move eth_init() out of new_netif()
Move the initialization of the ethernet devices out of the new_netif()
function. Indeed, new_netif() accepts a struct device argument, which
is expected to be valid and active. The activation and selection of
this device are achieved by eth_init() (on first time the network
stack is used) and eth_set_current(). This is what takes care of the
ethrotate and ethact environment variables. Therefore, move these calls
to a new function: net_lwip_set_current(), and use it whenever a
net-lwip command is run.
This patch hopefully fixes the incorrect net-lwip behavior observed on
boards with multiple ethernet interfaces [1].
Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp
command succeeds whether the cable is plugged into the first or second
port.
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
Patrice Chotard [Thu, 30 Jan 2025 16:35:40 +0000 (17:35 +0100)]
configs: stih410-b2260: Enable DM_REGULATOR flag
Since commit 6aa8bde8786d ("usb: host: ehci-generic: Remove DM_REGULATOR
flag") device_get_supply_regulator() returns -ENOSYS which is not handle
by ehci_enable_vbus_supply() and thus, ehci_usb_probe() return an error.
By enabling DM_REGULATOR flag, device_get_supply_regulator() return -ENOENT
which is handle and ehci_usb_probe() return 0.
Patrice Chotard [Thu, 30 Jan 2025 16:35:39 +0000 (17:35 +0100)]
ARM: dts: sti: Add fixed clock for ehci and ohci nodes in stih410-b2260.dtsi
On STi platforms, all clocks are enabled by BOOTROM, so CONFIG_CLK is
not set as no clock driver for STI exists.
As ehci-generic and ohci-generic drivers are used on platforms where
CONFIG_CLK is set, clk_get_bulk() returns-ENOSYS in case of
stih410-b2260.
To avoid this error, add fixed clocks for ehci and ohci nodes for
stih410-b2260 to fix the following errors:
Bus usb@9a03c00: ohci_generic usb@9a03c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a03e00: ehci_generic usb@9a03e00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83c00: ohci_generic usb@9a83c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83e00: ehci_generic usb@9a83e00: Failed to get clocks (ret=-19)
Port not available.
scanning bus dwc3@9900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Patrice Chotard [Mon, 2 Dec 2024 07:46:44 +0000 (08:46 +0100)]
usb: gadget: f_mass_storage: Add schedule() in sleep_thread()
In case "ums" command is used on platforms which don't implement
g_dnl_board_usb_cable_connected() and USB cable is not connected,
we stay inside sleep_thread() forever and watchdog is triggered.
Simon Glass [Sun, 1 Dec 2024 14:42:29 +0000 (07:42 -0700)]
CI: Drop extra condition for sjg lab
The rules part of the template makes sure that this doesn't run until
specifically requested. Drop the check in the script itself, so it is
possible to trigger a run manually without re-pushing the tree.
Santhosh Kumar K [Wed, 29 Jan 2025 23:44:02 +0000 (17:44 -0600)]
arm: mach-k3: am62*_init: Probe ESM nodes
On AM62A and AM62P devices, it is possible to route Main ESM error
events to MCU ESM. MCU ESM high error output can trigger the reset
logic to reset the device. So, for these devices we have Main ESM and
MCU ESM nodes in the device tree. Add functions to probe these nodes
if CONFIG_ESM_K3 is enabled.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
Andre Przywara [Thu, 30 Jan 2025 13:36:46 +0000 (13:36 +0000)]
env: fat: Avoid writing to read-only location
The env_fat_get_dev_part() function mostly returns a fixed string, set
via some Kconfig variable. However when the first character is a colon,
that means that the boot device number is determined at runtime, and
patched in. This requires altering the string.
So far this was done via some ugly and actually illegal direct write to
the .rodata string storage. We got away with this because U-Boot maps
everything as read/write/execute so far.
A proposed patch set actually enforces read-only (and no-execute)
permissions in the page tables, so this routine now causes an exception:
=======================
Loading Environment from FAT... "Synchronous Abort" handler, esr 0x9600004f, far 0xfffb7d4c
elr: 000000004a054228 lr : 000000004a05421c (reloc)
elr: 00000000fff7c228 lr : 00000000fff7c21c
.....
=======================
Rewrite the routine to do away with the dodgy string manipulation,
instead allocate the string in the r/w .data section, where we can
safely manipulate it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tom Rini [Mon, 10 Feb 2025 16:29:36 +0000 (10:29 -0600)]
Merge patch series "FIX: Re-enable MUX_MMIO on J721E/J7200"
Siddharth Vadapalli <s-vadapalli@ti.com> says:
Hello,
This series re-enables MUX_MMIO at U-Boot proper on J721E and J7200
SoCs. The commits which introduced support for Hyperflash boot on both
of these SoCs disabled MUX_MMIO functionality at U-Boot proper, thereby
introducing a regression.
Series is based on commit 2b1c8d3b2d cmd: Fix Kconfig coding style
of the master branch of U-Boot.
configs: j7200_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree. On J7200
SoC, PCIe functionality is broken since commit under fixes.
configs: j721e_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree.
Wadim Egorov [Wed, 5 Feb 2025 04:30:11 +0000 (05:30 +0100)]
arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c
Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM
are accessible across all stages. This enables reading the SoM
configuration at any point during the boot process.
Tom Rini [Fri, 7 Feb 2025 19:12:50 +0000 (13:12 -0600)]
Azure: Add missing "set -e" to docs job
Without setting the shell flag to exit immediately when a command exists
with a non-zero status we can have the situation where the htmldocs
target fails with an error but the job will succeed due to infodocs
passing and being the last build target.
Tom Rini [Fri, 7 Feb 2025 19:35:32 +0000 (13:35 -0600)]
Merge patch series "cmd/setexpr: support concatenation of direct strings"
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
cmd/setexpr: support concatenation of direct strings
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
test: remove available memory check in setexpr_test_str_oper()
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
test: remove available memory check in setexpr_test_str()
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heiko Schocher [Tue, 28 Jan 2025 13:52:46 +0000 (14:52 +0100)]
led: add function naming option from linux
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Heiko Schocher [Tue, 28 Jan 2025 13:52:45 +0000 (14:52 +0100)]
doc: remove redundant leds bindings
remove file doc/device-tree-bindings/leds/common.txt
as we have this now already in
dts/upstream/include/dt-bindings/leds/common.h
which is imported from linux.
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
projects / thirdparty / u-boot.git / log
