Pedro Alves [Mon, 17 Jul 2017 10:31:20 +0000 (11:31 +0100)]
C++ify dwarf2_per_objfile
This makes dwarf2_per_objfile a class with cdtors.
A following patch will add a non-trivial field to struct
dwarf2_per_objfile, making dwarf2_per_objfile itself non-trivial.
Since dwarf2_per_objfile is allocated in an obstack, we need to run
its cdtors manually.
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* dwarf2read.c (dwarf2_per_objfile): In-class initialize all
fields.
(dwarf2_per_objfile::dwarf2_per_objfile(objfile*, const
dwarf2_debug_sections*)): New.
(dwarf2_per_objfile::dwarf2_per_objfile(const
dwarf2_per_objfile&)): Declare as deleted.
(dwarf2_per_objfile::operator=): Declare as deleted.
(dwarf2_per_objfile::dwarf2_per_objfile)
(dwarf2_per_objfile::~dwarf2_per_objfile)
(dwarf2_per_objfile::free_cached_comp_units): New.
(dwarf2_has_info): dwarf2_per_objfile initialization code moved to
ctor. Call dwarf2_per_objfile's ctor manually.
(dwarf2_locate_sections): Deleted/refactored as ...
(dwarf2_per_objfile::locate_sections): ... this new method.
(free_cached_comp_units): Defer to
dwarf2_per_objfile::free_cached_comp_units.
(dwarf2_free_objfile): Call dwarf2_per_objfile's dtor manually.
Alan Modra [Sun, 16 Jul 2017 02:20:52 +0000 (11:50 +0930)]
__tls_get_addr_opt GOT entries
My 2017-01-24 patch (commit f0158f44) wrongly applied an optimization
of GOT entries for the __tls_get_addr_opt stub, to shared libraries.
When the TLS segment layout is known, as it is for the executable and
shared libraries loaded at initial program start, powerpc supports a
__tls_get_addr optimization. On the first call to __tls_get_addr for
a given __tls_index GOT entry, the DTPMOD word is set to zero and the
DTPREL word to the thread pointer offset to the thread variable. This
allows the __tls_get_addr_opt stub to return that value immediately
without making a call into glibc for any subsequent __tls_get_addr
calls using that __tls_index GOT entry.
That's all fine, but I thought I'd be clever and when the thread
variable is local, set up the GOT entry as if __tls_get_addr had
already been called. Which is good only for the executable, since ld
cannot know the TLS layout for shared libraries.
Of course, if this only applies to executables there isn't much point
to the optimization. Normally, GD and LD code in an executable will
be converted to IE or LE, losing the __tls_get_addr call. So the only
time it will trigger is with --no-tls-optimize. Thus, revert all
support.
* elf64-ppc.c (ppc64_elf_relocate_section): Don't optimize
__tls_index GOT entries when using __tls_get_addr_opt stub.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
Tom Tromey [Fri, 14 Jul 2017 14:10:39 +0000 (08:10 -0600)]
Handle sizeof(type) in Rust
PR rust/21764 notes that "sizeof" does not work correctly for all types
in Rust. The bug turns out to be an error in the conversion of the AST
to gdb expressions. This patch fixes the bug and also avoids generating
incorrect expressions in another case.
Tested on the buildbot. I'm checking this in.
2017-07-14 Tom Tromey <tom@tromey.com>
PR rust/21764:
* rust-exp.y (convert_ast_to_expression): Add "want_type"
parameter.
<UNOP_SIZEOF>: Split into separate case.
<UNOP_VAR_VALUE>: Handle want_type. Add error case.
Tom Tromey [Thu, 13 Jul 2017 21:03:27 +0000 (15:03 -0600)]
Make gdb.lookup_typename work for Rust types
PR rust/21763 points out that gdb.lookup_typename does not work properly
for (some) Rust types. I tracked this down to a missing case in
symbol_matches_domain.
Tested by the buildbot.
2017-07-14 Tom Tromey <tom@tromey.com>
PR rust/21763:
* symtab.c (symbol_matches_domain): Add language_rust to special
case.
* rust-exp.y (convert_ast_to_expression) <OP_VAR_VALUE>: Don't
treat LOC_TYPEDEF symbols as variables.
2017-07-14 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Add regression test for PR rust/21763.
Pedro Alves [Fri, 14 Jul 2017 15:50:35 +0000 (16:50 +0100)]
Fix gdb.base/completion.exp with --target_board=dwarf4-gdb-index
This is the same patch as posted at
<https://sourceware.org/ml/gdb-patches/2017-02/msg00644.html>, with
the test at
<https://sourceware.org/ml/gdb-patches/2017-02/msg00687.html> squashed
in.
The issue here is that make_file_symbol_completion_list_1, used when
completing a symbol restricted to a given source file, uses
lookup_symtab to look up the symtab with the given name, and search
for matching symbols inside. This assumes that there's only one
symtab for the given source file. This is an incorrect assumption
with (for example) -fdebug-types-section, where we'll have an extra
extra symtab containing the types. lookup_symtab finds that symtab,
and inside that symtab there are no functions...
gdb/ChangeLog:
2017-07-14 Pedro Alves <palves@redhat.com>
* symtab.c (make_file_symbol_completion_list_1): Iterate over
symtabs matching all symtabs with SRCFILE as file name instead of
only considering the first hit, with lookup_symtab.
gdb/testsuite/ChangeLog:
2017-07-14 Pedro Alves <palves@redhat.com>
* gdb.linespec/base/one/thefile.cc (z1): New function.
* gdb.linespec/base/two/thefile.cc (z2): New function.
* gdb.linespec/linespec.exp: Add tests.
Here, size of load2 section is 0x100000000. Also note that, 0xc00....
address range is kernel space for PowerPC. Now let's try to disassemble
do_sys_open() using /proc/kcore.
include/
* dis-asm.h (struct disassemble_info): Change type of buffer_length
field to size_t.
opcodes/
* dis-buf.c (buffer_read_memory): Change type of end_addr_offset,
max_addr_offset and octets variables to size_t.
Alan Modra [Fri, 14 Jul 2017 09:07:26 +0000 (18:37 +0930)]
ppc32 tlsopt tests
These all were odd in that they used r13 as the GOT pointer. That
didn't matter for the purpose of testing, but would never occur in
practice. Also, the tlsopt5 tests could have their global dynamic
sequences optimized to initial exec, so link with -shared.
PR ld/21529: Use a linker script to limit output with the test case
Complement commit d9409498813c ("Add a testcase for PR ld/21529") and
use a linker script to prevent an inter-segment gap arranged by the
default linker script associated with some targets such as `rx-elf':
$ ld -e main -o tmpdir/dump-elf tmpdir/pr21529.o
$ readelf -l tmpdir/dump-elf
Elf file type is EXEC (Executable file)
Entry point 0x10000004
There are 2 program headers, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x001000 0x10000000 0x10000000 0x00008 0x00008 R E 0x1000
LOAD 0x001ffc 0xbffffffc 0xbffffffc 0x00004 0x00004 RW 0x1000
Simon Marchi [Fri, 14 Jul 2017 10:47:40 +0000 (12:47 +0200)]
ax-gdb: Remove unnecessary gdbarch parameters
In multiple places, we pass the gdbarch as an argument to some
functions, even though it's available in the agent_expr structure also
passed to the same functions. Remove these arguments and replace their
usage with accesses to agent_expr::gdbarch.
Simon Marchi [Fri, 14 Jul 2017 10:47:39 +0000 (12:47 +0200)]
ax-gdb: Use ax->gdbarch instead of exp->gdbarch, remove unused parameters
In many ax generation functions, the "expression *exp" parameter is only
used to access the gdbarch. The same value can be found in the
"agent_expr *ax" parameter, which needs to be passed in any case. By
using ax->gdbarch instead of exp->gdbarch, we can avoid passing exp in
many of these functions.
Andrew Burgess [Thu, 13 Jul 2017 19:55:11 +0000 (20:55 +0100)]
gdb: Fix more parameter passing to mi_create_breakpoint
In the test gdb.mi/mi-vla-fortran.exp the parameters passed to
mi_create_breakpoint are passed in the wrong order. By good luck the
tests still passes, however the wrong test name is used. All fixed in
this commit.
A previous commit fixed most of these, but I missed this last one.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Correct even more parameter passing
to mi_create_breakpoint.
Debugging x86-64 GNU/Linux programs currently crashes GDB in
tdesc_use_registers during gdbarch initialization:
Program received signal SIGSEGV, Segmentation fault.
0x0000000001093eaf in htab_remove_elt_with_hash (htab=0x2ef9fa0, element=0x26af960, hash=557151073) at src/libiberty/hashtab.c:728
728 if (*slot == HTAB_EMPTY_ENTRY)
(top-gdb) p slot
$1 = (void **) 0x0
(top-gdb) bt
#0 0x0000000001093eaf in htab_remove_elt_with_hash (htab=0x2ef9fa0, element=0x26af960, hash=557151073) at src/libiberty/hashtab.c:728
#1 0x0000000001093e79 in htab_remove_elt (htab=0x2ef9fa0, element=0x26af960) at src/libiberty/hashtab.c:714
#2 0x00000000009121b0 in tdesc_use_registers (gdbarch=0x3001240, target_desc=0x2659cb0, early_data=0x2881cb0)
at src/gdb/target-descriptions.c:1328
#3 0x000000000047c93e in i386_gdbarch_init (info=..., arches=0x0) at src/gdb/i386-tdep.c:8634
#4 0x0000000000818d5f in gdbarch_find_by_info (info=...) at src/gdb/gdbarch.c:5394
#5 0x00000000007198a8 in set_gdbarch_from_file (abfd=0x2f48250) at src/gdb/arch-utils.c:618
#6 0x00000000007f21cb in exec_file_attach (filename=0x7fffffffddb0 "/home/pedro/gdb/tests/threads", from_tty=1) at src/gdb/exec.c:380
#7 0x0000000000865c18 in catch_command_errors_const (command=0x7f1d83 <exec_file_attach(char const*, int)>, arg=0x7fffffffddb0 "/home/pedro/gdb/tests/threads",
from_tty=1) at src/gdb/main.c:403
#8 0x00000000008669cf in captured_main_1 (context=0x7fffffffd860) at src/gdb/main.c:1035
#9 0x0000000000866de2 in captured_main (data=0x7fffffffd860) at src/gdb/main.c:1142
#10 0x0000000000866e24 in gdb_main (args=0x7fffffffd860) at src/gdb/main.c:1160
#11 0x000000000041312d in main (argc=3, argv=0x7fffffffd968) at src/gdb/gdb.c:32
The direct cause of the crash is that we tried to remove an element
from the hash which supposedly exists, but does not. (htab_remove_elt
shouldn't really crash in this case, but that's secondary.)
The real problem is that early_data passed to tdesc_use_registers
includes regs from a target description that is not the target_desc,
which violates its assumptions. The registers in question are the
fs_base/gs_base registers, added by amd64_init_abi:
and that happens because amd64_linux_init_abi uses amd64_init_abi as
helper, but they don't coordinate on which fallback tdesc to use.
amd64_init_abi does:
if (! tdesc_has_registers (tdesc))
tdesc = tdesc_amd64;
and then adds the fs_base/gs_base registers of the "tdesc_amd64" tdesc
to the tdesc_arch_data.
After amd64_init_abi returns, amd64_linux_init_abi does:
if (! tdesc_has_registers (tdesc))
tdesc = tdesc_amd64_linux;
tdep->tdesc = tdesc;
and we end up tdesc_amd64_linux installed in tdep->tdesc.
The fix is to make sure that amd64_linux_init_abi and amd64_init_abi
agree on default tdesc, by adding a "default tdesc" parameter to
amd64_init_abi, instead of having amd64_init_abi hardcode a default.
With this, amd64_init_abi creates the fs_base/gs_base registers using
the tdesc_amd64_linux tdesc.
Tested on x86-64 GNU/Linux, -m64. I don't have an x32 setup handy.
Thanks to John Baldwin, Yao Qi and Simon Marchi for the investigation.
gdb/ChangeLog:
2017-07-13 Pedro Alves <palves@redhat.com>
* amd64-darwin-tdep.c (x86_darwin_init_abi_64): Pass tdesc_amd64
as default tdesc.
* amd64-dicos-tdep.c (amd64_dicos_init_abi):
* amd64-fbsd-tdep.c (amd64fbsd_init_abi):
* amd64-linux-tdep.c (amd64_linux_init_abi): Pass
tdesc_amd64_linux as default tdesc. Get final tdesc from the
tdep.
(amd64_x32_linux_init_abi): Pass tdesc_x32_linux as default tdesc.
Get final tdesc from the tdep.
* amd64-nbsd-tdep.c (amd64nbsd_init_abi): Pass tdesc_amd64 as
default tdesc.
* amd64-obsd-tdep.c (amd64obsd_init_abi): Likewise.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Likewise.
* amd64-tdep.c (amd64_init_abi): Add 'default_tdesc' parameter.
Use it as default tdesc.
(amd64_x32_init_abi): Add 'default_tdesc' parameter, and pass it
down to amd_init_abi. No longer handle fallback tdesc here.
* amd64-tdep.h (tdesc_x32): Declare.
(amd64_init_abi, amd64_x32_init_abi): Add 'default_tdesc'
parameter.
* amd64-windows-tdep.c (amd64_windows_init_abi): Pass tdesc_amd64
as default tdesc.
Andrew Burgess [Wed, 14 Jun 2017 18:47:52 +0000 (19:47 +0100)]
gdb: Fix parameter passing to mi_create_breakpoint
In the test gdb.mi/mi-vla-fortran.exp the parameters passed to
mi_create_breakpoint are passed in the wrong order. By good luck the
tests still passes, however the wrong test name is used. All fixed in
this commit.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Correct parameter passing to
mi_create_breakpoint.
Nick Clifton [Wed, 12 Jul 2017 11:17:02 +0000 (12:17 +0100)]
Fix compile time warnings building the binutils with gcc 7.1.1.
bfd * elf32-xtensa.c (elf_xtensa_get_plt_section): Increase length of
plt_name buffer.
(elf_xtensa_get_gotplt_section): Increase length of got_name
buffer.
* mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add a
default return of FALSE.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc): Add a
default return of FALSE.
binutils * dwarf.c (dwarf_vmatoa_1): Do not pass a NULL string pointer to
sprintf.
* srconv.c (walk_tree_type): Initialise the spare field of the
IT_dty structure.
gas * config/tc-pru.c (md_assemble): Add continue statement after
handling 'E' operand character.
* config/tc-v850.c (md_assemble): Initialise the 'insn' variable.
Alan Modra [Sun, 9 Jul 2017 13:41:32 +0000 (23:11 +0930)]
bfd_error_handler bfd_vma and bfd_size_type args
This patch uses the new %L _bfd_error_handler support for printing
bfd_vma arguments, and fixes a many other format and/or argument
errors in error messages.
bfd/
* binary.c (binary_set_section_contents): Don't print filepos in
error message.
(coff_write_object_contents): Cast size_t for error message.
(coff_slurp_line_table): Don't use bfd_vma symndx.
(coff_slurp_reloc_table): Remove unneeded cast.
* dwarf2.c (read_section): Cast bfd_int64_t to long long for
error message.
(find_abstract_instance_name): Likewise.
* elf32-arm.c (arm_type_of_stub): Correct error arg order.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Don't cast error arg.
(elf32_arm_check_relocs): Make r_symndx an int.
* elf32-cris.c (cris_elf_check_relocs): Delete extraneous %s in
format string.
* elf32-metag.c (elf_metag_relocate_section): Delete extra error
message arg.
* elf32-nds32.c (nds32_elf_ex9_build_hash_table): Rewrite bogus
error message.
* elf32-i386.c (elf_i386_check_relocs): Make r_symndx an int.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
* elf32-tic6x.c (elf32_tic6x_check_relocs): Likewise.
* elf32-tilepro.c (tilepro_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_check_relocs): Likewise.
* elfnn-riscv.c (riscv_elf_check_relocs): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
* elfxx-tilegx.c (tilegx_elf_check_relocs): Likewise.
* elf64-mmix.c (_bfd_mmix_after_linker_allocation): Cast size_t args
and use %lu for error message.
* elflink.c (elf_link_adjust_relocs): Delete extra error message arg.
* mmo.c (mmo_scan): Make stab_loc a file_ptr. Cast expression for
error message.
Han Shen [Mon, 10 Jul 2017 22:23:05 +0000 (15:23 -0700)]
Fixing for PR gold/21491 - Errata workaround can produce broken images.
The problem is caused by the fact that gold is relocating the stubs
for an entire output section when it processes the relocations for a
particular input section that happened to be designated as the stub
table "owner". The Relocate_task for that input section may or may not
run before the Relocate_task for another input section that contains
the code that needs the erratum fix, but doesn't "own" the stub
table. If it runs before (or might even race with) that other task, it
ends up with a copy of the unrelocated original instruction.
In other words - when calling fix_errata() from
do_relocate_sections(), gold is going through the list of errata stubs
that are associated only with that object. This routine updates the
stored original instruction and replaces it in the output view with a
branch to the stub. Later, as gold is going through the object file's
input sections, it then checks for stub tables "owned" by each input
section, and writes out all the stubs from that stub table, regardless
of what object file each stub is associated with.
Fixed by relocating the erratum stub only after the corresponding
errata spot is fixed. That is to have fix_errata() call
Stub_table::relocate_erratum_stub() for each stub.
gold/ChangeLog
2017-07-06 Han Shen <shenhan@google.com>
PR gold/21491
* aarch64.cc (Erratum_stub::invalidate_erratum_stub): New method.
(Erratum_stub::is_invalidated_erratum_stub): New method.
(Stub_table::relocate_reloc_stub): Renamed from "relocate_stub".
(Stub_table::relocate_reloc_stubs): Renamed from "relocate_stubs".
(Stub_table::relocate_erratum_stub): New method.
(AArch64_relobj::fix_errata_and_relocate_erratum_stubs): Renamed from
"fix_errata".
(Target_aarch64::relocate_reloc_stub): Renamed from "relocate_stub".
John Baldwin [Tue, 27 Jun 2017 01:18:19 +0000 (18:18 -0700)]
Support the fs_base and gs_base registers on FreeBSD/amd64 native processes.
Use ptrace operations to fetch and store the fs_base and gs_base registers
for FreeBSD/amd64 processes. Note that FreeBSD does not currently store the
value of these registers in core dumps, so these registers are only
available when inspecting a running process.
gdb/ChangeLog:
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
PT_GETFSBASE and PT_GETGSBASE.
(amd64bsd_store_inferior_registers): Use PT_SETFSBASE and
PT_SETGSBASE.
H.J. Lu [Tue, 11 Jul 2017 15:37:48 +0000 (08:37 -0700)]
Support single digit GCC version
On Fedora 26, "g++ -dumpversion" displays "7", instead of "7.1.1".
Update selective.exp to support single digit GCC version. Also
remove duplicated [4-9] version check.
* testsuite/ld-selective/selective.exp: Support single digit
GCC version.
Sync dlang demangling tests from upstream libiberty testsuite.
Rationale behind the change instead of adding a `.init$' postfix being
that "initializer for symbol" is much more informative when inspecting D
runtime type information in gdb, which is the only place where you would
encounter references to this compiler-generated symbol.
gdb/testsuite/ChangeLog:
* gdb.dlang/demangle.exp: Update for demangling changes.
Anton Kolesov [Mon, 3 Jul 2017 16:17:29 +0000 (19:17 +0300)]
Import setenv and unsetenv from gnulib
This patch supersedes
https://sourceware.org/ml/gdb-patches/2017-07/msg00009.html
---
Patch [1] broke a build on MinGW hosts, because MinGW doesn't provide POSIX
functions setenv () and unsetenv (). This can be fixed by using
implementations from gnulib.
Simon Marchi [Sun, 9 Jul 2017 18:25:38 +0000 (20:25 +0200)]
compile-loc2c: Fix uninitialized variable error
Compiling with clang gives this warning/error:
/home/emaisin/src/binutils-gdb/gdb/compile/compile-loc2c.c:731:6: error: variable 'uoffset' is uninitialized when used here [-Werror,-Wuninitialized]
uoffset += dwarf2_per_cu_text_offset (per_cu);
^~~~~~~
/home/emaisin/src/binutils-gdb/gdb/compile/compile-loc2c.c:669:23: note: initialize the variable 'uoffset' to silence this warning
uint64_t uoffset, reg;
^
= 0
I am really not sure if what this patch does is good, but it is my best
guess. DW_OP_addr means that there's an constant address provided by
the DWARF bytecode that should be pushed on the stack. That address is
considered skipped by the "op_ptr += addr_size", but it is never read.
uoffset is indeed read just after, without having been assigned first.
So I think the intent is to read the address, it was just omitted.
gdb/ChangeLog:
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Read
address when op is DW_OP_addr.
Tom Tromey [Sun, 28 May 2017 14:06:54 +0000 (08:06 -0600)]
Fix size check in dwarf2_evaluate_loc_desc_full
This Rust bug report:
https://github.com/rust-lang/rust/issues/41970
noted an error from gdb. What is happening here (for me, the original
report had a different error) is that a pieced DWARF expression is not
writing to every byte in the resulting value. GDB errors in this
case. However, it seems to me that it is always valid to write fewer
bytes; the issue comes from writing too many -- that is, the test is
reversed. The test was also checking the sub-object, but this also
seems incorrect, as it's expected for the expression to write the
entirety of the enclosing object. So, this patch reverses the test
and applies it to the outer type, not the subobject type.
Regtested on the buildbot.
gdb/ChangeLog
2017-07-09 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Reverse size
check and apply to outer type.
gdb/testsuite/ChangeLog
2017-07-09 Tom Tromey <tom@tromey.com>
John Baldwin [Wed, 28 Jun 2017 19:50:56 +0000 (12:50 -0700)]
Read signal information from FreeBSD core dumps.
FreeBSD recently added a new ELF core note which dumps the entire LWP
info structure (the same structure returned by the ptrace PT_LWPINFO
operation) for each thread. The plan is for this note to eventually
supplant the older "thrmisc" ELF core note as it contains more
information and it permits new information to be exported via both
ptrace() and core dumps using the same structure.
For signal information, the implementation is similar to the native
implementation for FreeBSD processes. The PL_FLAG_SI flag must be
checked to determine if the embedded siginfo_t structure is valid, and
if so it is transferred into the caller's buffer.
John Baldwin [Wed, 28 Jun 2017 18:11:20 +0000 (11:11 -0700)]
Add a new gdbarch method to fetch signal information from core files.
Previously the core_xfer_partial method used core_get_siginfo to handle
TARGET_OBJECT_SIGNAL_INFO requests. However, core_get_siginfo looked for
Linux-specific sections in the core file. To support fetching siginfo
from cores on other systems, add a new gdbarch method (`core_xfer_siginfo`)
and move the body of the existing core_get_siginfo into a
linux_core_xfer_siginfo implementation of this method in linux-tdep.c.
gdb/ChangeLog:
* corelow.c (get_core_siginfo): Remove.
(core_xfer_partial): Use the gdbarch "core_xfer_siginfo" method
instead of get_core_siginfo.
* gdbarch.sh (core_xfer_siginfo): New gdbarch callback.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
* linux-tdep.c (linux_core_xfer_siginfo): New.
(linux_init_abi): Install gdbarch "core_xfer_siginfo" method.
John Baldwin [Wed, 28 Jun 2017 16:53:06 +0000 (09:53 -0700)]
Fetch signal information for native FreeBSD processes.
Use the `pl_siginfo' field in the `struct ptrace_lwpinfo' object returned
by the PT_LWPINFO ptrace() request to supply the current contents of
$_siginfo for each thread. Note that FreeBSD does not supply a way to
modify the signal information for a thread, so $_siginfo is read-only for
FreeBSD.
To handle 32-bit processes on a 64-bit host, define types for 32-bit
compatible siginfo_t and convert the 64-bit siginfo_t to the 32-bit
equivalent when supplying information for a 32-bit process.
John Baldwin [Wed, 28 Jun 2017 15:14:06 +0000 (08:14 -0700)]
Implement the "get_siginfo_type" gdbarch method for FreeBSD architectures.
As with Linux architectures, cache the created type in the gdbarch when it
is first created. Currently FreeBSD uses an identical siginfo type on
all architectures, so there is no support for architecture-specific fields.
MIPS/LD: Fix a segfault from ELF `e_flags' access with non-ELF output BFD
Fix a commit 861fb55ab50a ("Defer allocation of R_MIPS_REL32 GOT
slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
regression and a more recent:
FAIL: ld-unique/pr21529
new LD test case failure, observed with all the relevant MIPS targets
whenever the linker is invoked with one or more ELF inputs and the
output format set to `binary'.
The culprit is a segmentation fault caused in `mips_before_allocation'
by a null pointer dereference, where an attempt is made to access the
ELF file header's `e_flags' member, for the purpose of determining
whether to produce a PLT and copy relocations, without first checking
that the output BFD is ELF. The `e_flags' member is stored in BFD's
private data pointed to by `tdep', which in the case of the `binary' BFD
is null, causing the segmentation fault. With other non-ELF BFDs such
as SREC `tdep' is not null and consequently no crash may happen and in
that case random data will be interpreted as it was `e_flags'.
Disable the access to `e_flags' then and all the associated checks and
consequently never produce a PLT and copy relocations if output is not a
MIPS ELF BFD, matching `_bfd_mips_elf_merge_private_bfd_data' that does
not process `e_flags' in that case either and therefore does not let us
decide here anyway if all the input objects included in the link are
suitable for use with a PLT and copy relocations.
ld/
* emultempl/mipself.em (mips_before_allocation): Avoid ELF
processing if not MIPS ELF.
* testsuite/ld-mips-elf/binary.d: New test.
* testsuite/ld-mips-elf/binary.ld: New test linker script.
* testsuite/ld-mips-elf/binary.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
David Blaikie [Thu, 6 Jul 2017 18:17:52 +0000 (11:17 -0700)]
Fission support for multiple CUs per DWO file
In some cases a compiler may produce a single object file (& thus single
DWO file) representing multiple source files. The most common example of
this is in whole program optimization (such as LLVM's LTO). Fission may
still be a beneficial feature to use here - to avoid the need to
read/link the debug info with system libraries and the like.
This change adds basic support for multiple CUs in a single DWO file to
support LLVM's output in this situation.
There is still outstanding work to design and implement a solution for
cross-CU references (usually using DW_FORM_ref_addr) in this scenario.
For now LLVM works around this by duplicating DIEs rather than making
cross-CU references in DWO files. This degrades debugger
behavior/quality especially for file-local entities.
2017-07-06 David Blaikie <dblaikie@gmail.com>
* dwarf2read.c (struct dwo_file): Use a htab of dwo_unit* (rather than
a singular dwo_unit*) to support multiple CUs in the same way that
multiple TUs are supported.
(create_cus_hash_table): Replace create_dwo_cu with a function for
parsing multiple CUs from a DWO file.
(open_and_init_dwo_file): Use create_cus_hash_table rather than
create_dwo_cu.
(lookup_dwo_cutu): Lookup CU in the hash table in the dwo_file with
htab_find, rather than comparing the signature to a singleton CU in
the dwo_file.
2017-07-06 David Blaikie <dblaikie@gmail.com>
* gdb.dwarf2/fission-multi-cu.S: Test containing multiple CUs in a DWO,
built from fissiont-multi-cu{1,2}.c.
* gdb.dwarf2/fission-multi-cu.exp: Test similar to fission-base.exp,
except putting 'main' and 'func' in separate CUs in the same DWO file.
* gdb.dwarf2/fission-multi-cu1.c: First CU for the multi-CU-single-DWO
test.
* gdb.dwarf2/fission-multi-cu2.c: Second CU in the multi-CU-single-DWO
test.
Pedro Alves [Wed, 5 Jul 2017 23:19:24 +0000 (00:19 +0100)]
Fix Python unwinder frames regression
The gdb.python/py-unwind.exp test is crashing GDB / leaving core dumps
in the test dir, even though it all passes cleanly. The crash is not
visible in gdb.sum/gdb.log because it happens as side effect of the
"quit" command, while flushing the frame cache.
The problem is simply a typo in a 'for' loop's condition, introduced
by a recent change [4fa847d78edd ("Remove MAX_REGISTER_SIZE from
py-unwind.c")], resulting in infinite loop / double-free.
The new test exposes the crash, like:
Running src/gdb/testsuite/gdb.python/py-unwind.exp ...
ERROR: Process no longer exists
gdb/ChangeLog:
2017-07-06 Pedro Alves <palves@redhat.com>
* python/py-unwind.c (pyuw_dealloc_cache): Fix for loop condition.
gdb/testsuite/ChangeLog:
2017-07-06 Pedro Alves <palves@redhat.com>
H.J. Lu [Wed, 5 Jul 2017 16:04:51 +0000 (09:04 -0700)]
Fix build with GCC 4.2
Fix GCC 4.2 warnings like:
cc1: warnings being treated as errors
binutils-gdb/bfd/dwarf2.c:1844: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
binutils-gdb/bfd/dwarf2.c: In function ‘line_info_add_file_name’:
binutils-gdb/bfd/dwarf2.c:1854: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
bfd/
* dwarf2.c (line_info_add_include_dir_stub): Replace time with
xtime.
(line_info_add_file_name): Likewise.
(decode_line_info): Likewise.
binutils/
* dwarf.c (display_debug_names): Replace index with xindex.
This patch adds support for the ARM Cortex-A55 and
Cortex-A75 processors.
The ARM Cortex-A55 and Cortex-A75 procsessors implement the ARMv8-A
architecture, with support for the ARMv8.1-A and ARMv8.2-A extensions,
including support for the 16-bit floating point extensions.
The 16-bit floating-point extensions are optional, and we haven't defined
an option mapping straight to them thus far, so this patch first needs to
add one of those in include/opcode/arm.h, then we can simply add the CPU names
as usual in config/tc-arm.c .
Tested on arm-none-eabi.
2017-07-05 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (arm_cpus): Add Cortex-A55 and Cortex-A75.
* doc/c-arm.texi (-mcpu): Document Cortex-A55 and Cortex-A75.
[Patch ARM] Support MVFR2 VFP Coprocessor register for ARMv8-A
This patch adds support mvfr2 control registers for armv8-a as
this was missed from the original port to armv8-a (documented
at G6.2.109 in (Issue B.a) of the ARM-ARM. This was discovered
by an internal user of the GNU toolchain.
I'd like to backport this to the binutils 2.28 and binutils 2.29
release branch if possible (with suitable testing and basically
checking removing the armv8-r parts).
Jiong Wang [Mon, 3 Jul 2017 16:15:26 +0000 (17:15 +0100)]
[AArch64] Remove useless and incorrect assertion
The outer caller elf_link_output_extsym in elflink.c is a traverse function on
all external symbol, and it will only call *finish_dynamic_symbol if some
conditions is meet. It is executed conditionally.
If the condition to trigger that assertion is satisified, it then won't satify
the outer check in finish_dynamic_symbol, so *finish_dynamic_symbol won't be
called that the assertion is expected to be dead code.
If elf_link_output_extsym is a traverse function that unconditionally called
on external symbols decided to be exported, then an assertion to make sure these
symbols are in sane status might make sense.
bfd/
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol): Remove the
sanity check at the head of this function.
Alan Modra [Mon, 3 Jul 2017 12:30:32 +0000 (22:00 +0930)]
strings: remove section/file size check
This reverts most of 06803313754, 2005-07-05 Dmitry V. Levin change
adding a check that section size doesn't exceed file size. As we've
seen recently with mmo tests, decoded section size can easily exceed
file size with formats that encode section data.
I've also changed "strings" to use bfd_malloc_and_get_section, so that
"strings" won't die on a malloc failure. I think it's better to
continue on looking at other sections after failing to dump a section
with fuzzed size.
The testcases at https://bugzilla.altlinux.org/show_bug.cgi?id=5871
on a 32-bit host now produce
$ strings -d --target=a.out-i386 /tmp/bfdkiller.dat
strings: error: /tmp/bfdkiller.dat(.text) is too large (0xffffffff bytes)
strings: /tmp/bfdkiller.dat: Reading section .text failed: Memory exhausted
strings: /tmp/bfdkiller.dat: Reading section .data failed: File truncated
org.ec
$ strings -d --target=a.out-i386 /tmp/eclipse-state
strings: /tmp/eclipse-state: Reading section .text failed: File truncated
org.eclipse.osgi
System Bundle
[snip]
* strings.c (filename_and_size_t): Delete.
(strings_a_section): Don't check section size against file size.
Use bdf_malloc_and_get_section. Report an error on failures.
Replace arg param with filename and got_a_section param.
(got_a_section): Move to..
(strings_object_file): ..an auto var here. Iterate over sections
rather than calling bfd_map_over_sections. Adjust strings_a_section
call.
Alan Modra [Mon, 3 Jul 2017 12:29:45 +0000 (21:59 +0930)]
Support %Lx, %Lu, %Ld in _bfd_error_handler format
One way to print 64-bit bfd_vma or bfd_size_type values on 32-bit
hosts is to cast the value to long long and use the 'll' modifier in
printf format strings. However, that's awkward because we also
support the Microsoft C library printf that uses 'I64' as a modifier
instead, and having variants of translated strings would not endear us
to the translation project. So, rewrite the 'll' modifier in
_doprint for Microsoft. Even with that capability it's not so nice
for 32-bit code to need casts to long long, so this patch makes 'L' a
modifier for bfd_vma rather than an alias for 'll'.
I've then used the new 'L' modifier to fix selected format strings.
* bfd.c (_doprnt): Rewrite "ll" and "L" modifiers to "I64" for
__MSVCRT__. Support "L" modifier for bfd_vma. Formatting.
* elf.c (setup_group): Use "Lx" to print sh_size.
(_bfd_elf_setup_sections): Remove unnecessary cast and print
unknown section type in hex.
(copy_special_section_fields): Style fix.
(bfd_section_from_shdr): Correct format for sh_link. Use a
common error message for all the variants of unrecognized
section types.
(assign_file_positions_for_load_sections): Use "Lx" for lma
adjust error message.
(assign_file_positions_for_non_load_sections): Formatting.
(rewrite_elf_program_header): Formatting. Use "Lx" for
bfd_vma values in error messages.
* elfcode.h (elf_slurp_reloc_table_from_section): Cast
ELF_R_SYM value to type expected by format.
* elflink.c (elf_link_read_relocs_from_section): Use "Lx"
in error messages.
(elf_link_add_object_symbols): Use "Lu" for symbol sizes.
(elf_link_input_bfd): Use "Lx" for r_info.
(bfd_elf_gc_record_vtinherit): Use "Lx" for offset.
Alan Modra [Mon, 3 Jul 2017 12:29:30 +0000 (21:59 +0930)]
BFD long long cleanup
long long isn't supposed to be used without a configure test, to
support ancient compilers. Probably not terribly important nowadays.
* bfd.c (bfd_scan_vma): Don't use long long unless HAVE_LONG_LONG.
* coff-rs6000.c (FMT20): Handle hosts with 64-bit long and
Microsoft C library variant of long long format specifier.
(PRINT20): Cast value to bfd_uint64_t not long long.
* coffcode.h (coff_print_aux): Use BFD_VMA_FMT.
* coff-x86_64.c (coff_amd64_reloc): Use bfd_uint64_t rather than
long long. Don't cast to bfd_vma.
* elf32-score.c (score3_bfd_getl48): Likewise.
* vms-alpha.c (_bfd_vms_slurp_eisd): Likewise.
projects / thirdparty / binutils-gdb.git / log
