Jan Beulich [Wed, 27 Sep 2023 08:53:38 +0000 (10:53 +0200)]
x86-64: fix suffix-less PUSH of symbol address
PR gas/30856
In 5cc007751cdb ("x86: further adjust extend-to-32bit-address
conditions") I neglected the case of PUSH, which is the only insn
allowing (proper) symbol addresses to be used as immediates (not
displacements, like CALL/JMP) in the absence of any register operands.
Since it defaults to 64-bit operand size, guessing an L suffix is wrong
there.
Alan Modra [Thu, 24 Aug 2023 23:42:18 +0000 (09:12 +0930)]
PR30794, PowerPC gold: internal error in add_output_section_to_load
Caused by commit 5a97377e5513, specifically this code added to
Target_powerpc::do_relax
+ if (parameters->options().output_is_position_independent())
+ this->rela_dyn_size_
+ = this->rela_dyn_section(layout)->current_data_size();
The problem here is that if .rela.dyn isn't already created then the
call to rela_dyn_section creates it, and as this comment in
Target_powerpc::do_finalize_sections says:
// Annoyingly, we need to make these sections now whether or
// not we need them. If we delay until do_relax then we
// need to mess with the relaxation machinery checkpointing.
We can't be creating sections in do_relax.
PR 30794
* powerpc.cc (Target_powerpc::do_relax): Only set rela_dyn_size_
for size == 64, and assert that rela_dyn_ already exists.
Tidy code setting plt_thread_safe, which also only needs to be
set when size == 64 for ELFv1.
Alan Modra [Sun, 6 Aug 2023 22:58:55 +0000 (08:28 +0930)]
PR30724, cygwin ld performance regression since 014a602b86
According to the reporter of this bug the newlib fseek implementation
is likely slowed down by locking and fflush, only attempting to
optimise seeks when the file is opened read-only. Thus when writing
the output we get a dramatic slowdown due to commit 014a602b86.
PR 30724
* bfd.c (enum bfd_last_io): New.
(struct bfd): Add last_io field.
* bfd-in2.h: Regenerate.
* bfd-io.c (bfd_bread, bfd_bwrite): Force seek if last_io is
opposite direction.
(bfd_seek): Reinstate optimisation for seek to same position.
Alan Modra [Fri, 4 Aug 2023 05:39:53 +0000 (15:09 +0930)]
PR30697, ppc32 mix of local-dynamic and global-dynamic TLS
This fixes miscounting of dynamic relocations on GOT entries when
a) there are both local-dynamic and global-dynamic tls accesss for a
given symbol, and
b) the symbol is global with non-default visibility, and
c) the __tls_get_addr calls aren't optimised away.
PR 30697
bfd/
* elf32-ppc.c (allocate_dynrelocs): Correct local-dynamic
reloc count.
ld/
* testsuite/ld-powerpc/tls32ldgd.d,
* testsuite/ld-powerpc/tls32ldgd.s: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
Jan Beulich [Tue, 1 Aug 2023 10:39:44 +0000 (12:39 +0200)]
gas: rework timestamp preservation on doc/asconfig.texi
PR 28909
Sadly "cp -p", doing more than just preserving the time stamp, can fail
e.g. upon trying to preserve ownership (which we don't care about), as
can be observed on e.g. Cygwin. Replace the use of -p by a use of touch,
this way also only preserving modification time.
Jan Beulich [Fri, 28 Jul 2023 10:34:30 +0000 (12:34 +0200)]
gas: amend X_unsigned uses
PR gas/30688
X_unsigned being clear does not indicate a negative number; it merely
indicates a signed one (whose sign may still be clear). Amend two uses
by an actual value check.
Tsukasa OI [Wed, 26 Jul 2023 01:39:44 +0000 (01:39 +0000)]
RISC-V: Add actual 'Zvkt' extension support
The 'Zvkt' extension is listed on the added extensions in the GNU Binutils
version 2.41 (see binutils/NEWS). However, the support of this extension
was actually missing.
This commit adds actual support of this extension and adds implications
from 'Zvkn' and 'Zvks' superset extensions.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets) Add implications from
'Zvkn' and 'Zvks'. (riscv_supported_std_z_ext): Add 'Zvkt' to
the supported extension list.
YunQiang Su [Fri, 28 Jul 2023 05:00:37 +0000 (06:00 +0100)]
MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targets
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/GAS/testsuite: Fix n64 compact EH failures
Expect a `.MIPS.options' section alternatively to `.reginfo' and ignore
contents of either as irrelevant for all the affected compact EH tests,
removing these regressions:
mips64-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
mips64-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
mips64-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
mips64-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
mips64-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
mips64-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
mips64-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
mips64-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
mips64el-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
mips64el-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
mips64el-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
mips64el-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
mips64el-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
mips64el-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
mips64el-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
mips64el-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
gas/
* testsuite/gas/mips/compact-eh-eb-1.d: Accept `.MIPS.options'
section as an alternative to `.reginfo' and ignore contents of
either.
* testsuite/gas/mips/compact-eh-eb-2.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-3.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-4.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-5.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-6.d: Likewise.
* testsuite/gas/mips/compact-eh-el-1.d: Likewise.
* testsuite/gas/mips/compact-eh-el-2.d: Likewise.
* testsuite/gas/mips/compact-eh-el-3.d: Likewise.
* testsuite/gas/mips/compact-eh-el-4.d: Likewise.
* testsuite/gas/mips/compact-eh-el-5.d: Likewise.
* testsuite/gas/mips/compact-eh-el-6.d: Likewise.
projects / thirdparty / binutils-gdb.git / log
