Dodji Seketeli [Fri, 4 May 2012 16:38:27 +0000 (16:38 +0000)]
Enable -Wunused-local-typedefs when -Wall or -Wunused is on
Now that the libstdc++ testsuite is run with -ftrack-macro-location by
default, this patch triggers the -Wunused-local-typedefs warning when
-Wunused (and -Wall) is turned on.
The patch has been reviewed and accepted[1] a while ago, but was waiting
for the -ftrack-macro-expansion work to go in first.
Bootstrapped and tested again on x86_64-unknown-linux-gnu against
trunk.
Paolo Carlini [Fri, 4 May 2012 15:02:05 +0000 (15:02 +0000)]
re PR c++/53166 (static_assert produces bogus warning)
/cp
2012-05-04 Paolo Carlini <paolo.carlini@oracle.com>
PR c++/53166
* pt.c (instantiate_class_template_1): Increase / decrease
c_inhibit_evaluation_warnings around the tsubst_expr call
for STATIC_ASSERT_CONDITION.
(tsubst_expr, case STATIC_ASSERT): Likewise.
* typeck.c (cp_build_binary_op, case EQ_EXPR/NE_EXPR): Check
c_inhibit_evaluation_warnings in the OPT_Waddress warnings.
/testsuite
2012-05-04 Paolo Carlini <paolo.carlini@oracle.com>
Ulrich Weigand [Fri, 4 May 2012 12:46:04 +0000 (12:46 +0000)]
re PR tree-optimization/52633 (Compiler ICE in vect_is_simple_use_1 (ARM))
gcc/
PR tree-optimization/52633
* tree-vect-patterns.c (vect_vect_recog_func_ptrs): Swap order of
vect_recog_widen_shift_pattern and vect_recog_over_widening_pattern.
(vect_recog_over_widening_pattern): Remove handling of code that was
already detected as over-widening pattern. Remove special handling
of "unsigned" cases. Instead, support general case of conversion
of the shift result to another type.
gcc/testsuite/
PR tree-optimization/52633
* gcc.dg/vect/vect-over-widen-1.c: Two patterns should now be
recognized as widening shifts instead of over-widening.
* gcc.dg/vect/vect-over-widen-1-big-array.c: Likewise.
* gcc.dg/vect/vect-over-widen-4.c: Likewise.
* gcc.dg/vect/vect-over-widen-4-big-array.c: Likewise.
* gcc.target/arm/pr52633.c: New test.
Ulrich Weigand [Fri, 4 May 2012 12:27:04 +0000 (12:27 +0000)]
tree-vect-patterns.c (vect_single_imm_use): New function.
* tree-vect-patterns.c (vect_single_imm_use): New function.
(vect_recog_widen_mult_pattern): Use it instead of open-coding loop.
(vect_recog_over_widening_pattern): Likewise.
(vect_recog_widen_shift_pattern): Likewise.
Ulrich Weigand [Fri, 4 May 2012 12:26:03 +0000 (12:26 +0000)]
tree-vect-patterns.c (vect_same_loop_or_bb_p): New function.
* tree-vect-patterns.c (vect_same_loop_or_bb_p): New function.
(vect_handle_widen_op_by_const): Use it instead of open-coding test.
(vect_recog_widen_mult_pattern): Likewise.
(vect_operation_fits_smaller_type): Likewise.
(vect_recog_over_widening_pattern): Likewise.
(vect_recog_widen_shift_pattern): Add to vect_same_loop_or_bb_p test.
re PR lto/50602 (ICE in tree_nrv, at tree-nrv.c:155 during large LTO build)
2012-05-04 Richard Guenther <rguenther@suse.de>
PR lto/50602
* lto-wrapper.c (merge_and_complain): Complain about mismatches
of -freg-struct-return and -fpcc-struct-return.
(run_gcc): Pass through -freg-struct-return and -fpcc-struct-return
from the input file options and ignore those from the link
command line.
Eric Botcazou [Fri, 4 May 2012 11:01:34 +0000 (11:01 +0000)]
re PR target/48496 ('asm' operand requires impossible reload)
PR target/48496
* recog.c (constrain_operands): If extra constraints are present, also
accept pseudo-registers with equivalent memory locations during reload.
Olivier Hainque [Fri, 4 May 2012 08:05:52 +0000 (08:05 +0000)]
collect2.c (may_unlink_output_file): New global.
* collect2.c (may_unlink_output_file): New global.
(maybe_unlink): Honor it.
* collect2.h: Add extern for it.
* tlink.c (do_tlink): Set it to true if the link succeeded.
Bin Cheng [Fri, 4 May 2012 02:52:27 +0000 (02:52 +0000)]
re PR rtl-optimization/52804 (IRA/RELOAD allocate wrong register on ARM for cortex-m0)
PR rtl-optimization/52804
* reload1.c (reload_reg_reaches_end_p): Check whether successor
reload with type RELOAD_FOR_INPUT_ADDRESS kills reload register
of current one with type RELOAD_FOR_INPADDR_ADDRESS.
Same stands for reloads with type RELOAD_FOR_OUTPUT_ADDRESS and
RELOAD_FOR_OUTADDR_ADDRESS.
David S. Miller [Thu, 3 May 2012 22:19:35 +0000 (22:19 +0000)]
Fix long double float miscompilations on sparc 64-bit.
PR target/52684
* config/sparc/sparc.c (emit_soft_tfmode_libcall): If we pass a
MEM directly into a libcall, mark it's MEM_EXPR as addressable.
(sparc_emit_float_lib_cmp): Likewise.
re PR target/53199 (__builtin_bswap64 and __builtin_bswap32 generate errors if -mcpu=power6)
[gcc]
2012-05-03 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/53199
* config/rs6000/rs6000.md (bswapdi splitters): If
-mavoid-indexed-addresses (or -mcpu=power6 which sets it by
default) is used, generate an alternate sequence that does not
depend on using indexed addressing.
[gcc/testsuite]
2012-05-03 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/53199
* gcc.target/powwerpc/pr53199.c: New file.
Jason Merrill [Thu, 3 May 2012 19:55:16 +0000 (15:55 -0400)]
dwarf2out.c (struct external_ref, [...]): New.
* dwarf2out.c (struct external_ref, build_local_stub): New.
(hash_external_ref, external_ref_eq, lookup_external_ref): New.
(optimize_external_refs, optimize_external_refs_1): New.
(change_AT_die_ref): New.
(clone_as_declaration): Add DW_AT_signature when cloning a declaration.
(build_abbrev_table): Take the external refs hashtable.
(output_comp_unit): Get it from optimize_external_refs and pass it in.
Jason Merrill [Thu, 3 May 2012 16:19:17 +0000 (12:19 -0400)]
dwarf2out.c (die_struct): Add comdat_type_p flag.
* dwarf2out.c (die_struct): Add comdat_type_p flag. Use it instead of
use_debug_types to discriminate the die_id union.
(print_die, assign_symbol_names, copy_decls_walk): Likewise.
(build_abbrev_table, output_die): Likewise.
(prune_unused_types_walk_attribs): Likewise.
(generate_type_signature, copy_declaration_context): Set it.
(remove_child_or_replace_with_skeleton): Set it.
(dwarf2out_start_source_file, dwarf2out_end_source_file): Don't
check use_debug_types.
(dwarf2out_finish): Do break_out_includes after .debug_types.
Jason Merrill [Thu, 3 May 2012 16:19:02 +0000 (12:19 -0400)]
dwarf2out.c (modified_type_die): Use scope_die_for.
* dwarf2out.c (modified_type_die): Use scope_die_for.
(gen_type_die_with_usage, dwarf2out_finish): Likewise.
(uses_local_type_r, uses_local_type): New.
(scope_die_for): Keep a type that uses a local type in local scope.
Use get_context_die for namespace and type scope.
Jason Merrill [Thu, 3 May 2012 16:18:51 +0000 (12:18 -0400)]
i386.c (ix86_code_end): Set DECL_IGNORED_P on the pc thunk.
* config/i386/i386.c (ix86_code_end): Set DECL_IGNORED_P on the
pc thunk.
* dwarf2out.c (output_aranges): Skip DECL_IGNORED_P functions.
(dwarf2out_finish): Likewise.
Martin Jambor [Thu, 3 May 2012 15:48:56 +0000 (17:48 +0200)]
builtins.c (get_object_alignment_1): Return whether we can determine the alignment or conservatively assume byte...
2012-05-03 Martin Jambor <mjambor@suse.cz>
* builtins.c (get_object_alignment_1): Return whether we can determine
the alignment or conservatively assume byte alignment. Return the
alignment by reference. Use get_pointer_alignment_1 for dereference
alignment.
(get_pointer_alignment_1): Return whether we can determine the
alignment or conservatively assume byte alignment. Return the
alignment by reference. Use get_ptr_info_alignment to get SSA name
alignment.
(get_object_alignment): Update call to get_object_alignment_1.
(get_object_or_type_alignment): Likewise, fall back to type alignment
only when it returned false.
(get_pointer_alignment): Update call to get_pointer_alignment_1.
* fold-const.c (get_pointer_modulus_and_residue): Update call to
get_object_alignment_1.
* ipa-prop.c (ipa_modify_call_arguments): Update call to
get_pointer_alignment_1.
* tree-sra.c (build_ref_for_offset): Likewise, fall back to the type
of MEM_REF or TARGET_MEM_REF only when it returns false.
* tree-ssa-ccp.c (get_value_from_alignment): Update call to
get_object_alignment_1.
(ccp_finalize): Use set_ptr_info_alignment.
* tree.h (get_object_alignment_1): Update declaration.
(get_pointer_alignment_1): Likewise.
* gimple-pretty-print.c (dump_gimple_phi): Use get_ptr_info_alignment.
(dump_gimple_stmt): Likewise.
* tree-flow.h (ptr_info_def): Updated comments of fields align and
misalign.
(get_ptr_info_alignment): Declared.
(mark_ptr_info_alignment_unknown): Likewise.
(set_ptr_info_alignment): Likewise.
(adjust_ptr_info_misalignment): Likewise.
* tree-ssa-address.c (copy_ref_info): Use new access functions to get
and set alignment of SSA names.
* tree-ssa-loop-ivopts.c (rewrite_use_nonlinear_expr): Call
mark_ptr_info_alignment_unknown.
* tree-ssanames.c (get_ptr_info_alignment): New function.
(mark_ptr_info_alignment_unknown): Likewise.
(set_ptr_info_alignment): Likewise.
(adjust_ptr_info_misalignment): Likewise.
(get_ptr_info): Call mark_ptr_info_alignment_unknown.
* tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref):
Likewise.
(bump_vector_ptr): Likewise.
* tree-vect-stmts.c (create_array_ref): Use set_ptr_info_alignment.
(vectorizable_store): Likewise.
(vectorizable_load): Likewise.
Michael Matz [Thu, 3 May 2012 14:34:07 +0000 (14:34 +0000)]
basic-block.h (struct rtl_bb_info, [...]): Move in front of basic_block_def.
* basic-block.h (struct rtl_bb_info, struct gimple_bb_info): Move
in front of basic_block_def.
(struct basic_block_def): Make il.gimple the full struct, not a
pointer.
(__assert_gimple_bb_smaller_rtl_bb): Asserting typedef.
* cfgexpand.c (expand_gimple_basic_block): Clear all il.gimple
members.
* gimple-iterator.c (gimple_stmt_iterator): Don't special case
NULL il.gimple, which can't happen anymore.
* gimple.h (bb_seq): il.gimple can't be NULL.
(bb_seq_add): Ditto.
(set_bb_seq): Adjust.
(gsi_start_bb, gsi_last_bb): Tidy.
* lto-streamer-in.c (make_new_block): Don't zero members that
are zeroed already, don't allocate a gimple_bb_info.
* tree-cfg.c (create_bb): Don't allocate a gimple_bb_info.
(remove_bb): Clear all il.gimple members.
(gimple_verify_flow_info): Adjust for flat il.gimple.
* tree-flow-inline.h (phi_nodes, phi_nodes_ptr, set_phi_nodes): Adjust.
tree-ssa-pre.c (valid_in_sets): Remove checking of trapping operations.
2012-05-03 Richard Guenther <rguenther@suse.de>
* tree-ssa-pre.c (valid_in_sets): Remove checking of trapping
operations.
(prune_clobbered_mems): Do it here. Do not uselessly sort
expressions.
(compute_avail): Do not add possibly trapping operations to
EXP_GEN if they might not be executed in the block.
tree-ssa-pre.c (debug_bitmap_sets_for): New function.
2012-05-03 Richard Guenther <rguenther@suse.de>
* tree-ssa-pre.c (debug_bitmap_sets_for): New function.
(union_contains_value): Remove.
(vro_valid_in_sets): Likewise.
(op_valid_in_sets): New function.
(valid_in_sets): Use op_valid_in_sets.
(insert_into_preds_of_block): Move dumping ...
(do_regular_insertion): ... here.
(do_partial_partial_insertion): ... and here. Dump that
we've found a partial partial redundancy.
(insert): Dump the current insert iteration.
Jakub Jelinek [Thu, 3 May 2012 11:09:07 +0000 (13:09 +0200)]
re PR plugins/53126 (gcc-4.7.0 error "gcc-ar: Cannot find plugin")
PR plugins/53126
* gcc-ar.c (main): If GCC_EXEC_PREFIX is set in env,
append program name to it and pass that as first argument
to make_relative_prefix. Always pass standard_libexec_prefix
as last argument to make_relative_prefix. If
make_relative_prefix returns NULL, fall back to
standard_libexec_prefix.
Michael Matz [Thu, 3 May 2012 02:32:08 +0000 (02:32 +0000)]
re PR bootstrap/53197 (bootstrap comparison failure)
PR bootstrap/53197
* tree-ssa-dse.c (dse_optimize_stmt): Take pointer to
iterator.
(dse_enter_block): Properly iterate the whole sequence even
if the last statement was removed.
Steven Bosscher [Wed, 2 May 2012 22:18:11 +0000 (22:18 +0000)]
vms.h (SUBTARGET_OVERRIDE_OPTIONS): For pic code, unset flag_jump_tables.
* config/alpha/vms.h (SUBTARGET_OVERRIDE_OPTIONS): For pic code,
unset flag_jump_tables.
* stmt.c (expand_case): Remove special flag_pic case conditional
on ASM_OUTPUT_ADDR_DIFF_ELT not being defined.
gcc/
* common/config/s390/s390-common.c (s390_option_optimization_table):
Enable -fsched-pressure using -fsched-pressure-algorithm=model by
default when optimizing.
DJ Delorie [Wed, 2 May 2012 19:34:31 +0000 (15:34 -0400)]
crossconfig.m4: Since we know that all TPF builds are cross- builds and cannot run...
* crossconfig.m4: Since we know that all TPF builds are cross-
builds and cannot run configuration-time link tests, do not
allow it; just go with known supported linker options.
* configure: Regenerate (called as GLIBCXX_CROSSCONFIG).
Dodji Seketeli [Wed, 2 May 2012 16:55:19 +0000 (16:55 +0000)]
Properly initialize cpp_context in destringize_and_run
destringize_and_run forgets to initialize all the fields of the
cpp_context that it pushes. Later _cpp_pop_context then gets confused
when it accesses context->tokens_kind via the call to macro_of_context
on context->prev.
The first hunk of this patch is the real obvious fix. The second hunk
is just an assert that I am adding to err on the safe side.
Tested by on x86_64-unknown-linux-gnu against trunk by running the
test gcc.dg/gomp/macro-4.c under Valgrind, and bootstrapped.
libcpp/
* directives.c (destringize_and_run): Properly initialize the new
context.
* macro.c (_cpp_pop_context): Assert that we shouldn't try to pop
the initial base context, which has the same life time as the
current instance of cpp_file.
Michael Matz [Wed, 2 May 2012 16:41:48 +0000 (16:41 +0000)]
coretypes.h (gimple_seq, [...]): Typedef as gimple.
* coretypes.h (gimple_seq, const_gimple_seq): Typedef as gimple.
* gimple.h (struct gimple_seq_node_d, struct gimple_seq_d): Remove.
(const_gimple_seq_node): Remove.
(gimple_seq_node): Typedef as gimple.
(struct gimple_statement_base): Add next and prev members,
adjust all WORD markers in using structs.
(union gimple_statement_d): Link via gsbase.next field for GC and PCH.
(gimple_seq_first, gimple_seq_first_stmt, gimple_seq_last,
gimple_seq_last_stmt): Adjust as gimple_seq, gimple_seq_node and
gimple are the same.
(gimple_seq_set_last, gimple_seq_set_first): Don't allocate
gimple_seq, adjust.
(gimple_init_singleton): New function.
(gsi_start_1, gsi_last_1, gsi_end_p, gsi_one_before_end_p): Adjust.
(gsi_next, gsi_prev): Adjust, handle prev cyclic list correctly.
(gsi_stmt): Adjust.
(gsi_stmt_ptr): Remove.
(enum gimple_alloc_kind): Remove gimple_alloc_kind_seq member.
* gimple-iterator.c (update_bb_for_stmts): Take last parameter
again, adjust for above changes.
(update_call_edge_frequencies): Adjust for above changes.
(gsi_insert_seq_nodes_before): Rewrite for new data structure.
(gsi_insert_seq_nodes_after): Ditto.
(gsi_split_seq_after): Ditto.
(gsi_set_stmt): Ditto.
(gsi_split_seq_before): Ditto.
(gsi_remove): Ditto.
(gsi_insert_seq_before_without_update): Don't free sequence.
(gsi_insert_seq_after_without_update): Ditto.
(gsi_replace): Assert some more invariants.
(gsi_insert_before_without_update, gsi_insert_after_without_update):
Tidy.
(gsi_for_stmt): Don't search for stmt.
(gsi_insert_on_edge_immediate): Tidy.
* gimple.c (gimple_alloc_k): Remove "sequences".
(gimple_seq_cache): Remove.
(gimple_alloc_stat): Make stmt a singleton sequence.
(gimple_seq_alloc, gimple_seq_free): Remove.
(gimple_assign_set_rhs_with_ops_1): Ensure new stmt is a singleton.
(gimple_copy): Ditto.
* gimplify.c (gimplify_cleanup_point_expr): Use gsi_set_stmt,
create iterator from correct sequence.
* tree-phinodes.c (make_phi_node): Make stmt a singleton.
* gimple.h (gimple_stmt_iterator <seq>): Make it be pointer to
gimple_seq.
(gimple_seq_set_last, gimple_seq_set_first): Take pointer to
sequence, lazily allocate it.
(bb_seq_addr): New function.
(gsi_start_1): Rename from gsi_start, but take pointer to sequence.
(gsi_start): Macro to wrap gsi_start_1 taking pointer of argument.
(gsi_none): New function.
(gsi_start_bb): Adjust.
(gsi_last_1): Rename from gsi_last, but take pointer to sequence.
(gsi_last): Macro to wrap gsi_last_1 taking pointer of argument.
(gsi_last_bb): Adjust.
(gsi_seq): Adjust.
* tree-flow-inline.h (phi_nodes_ptr): New function.
* gimple.h (gimple_seq_first, gimple_seq_first_stmt, gimple_seq_last,
gimple_seq_last_stmt, gimple_seq_set_last, gimple_seq_set_first,
gimple_seq_empty_p, gimple_seq_alloc_with_stmt, bb_seq,
set_bb_seq): Move down to after gimple_statement_d definition.
* gimple-fold.c (gimplify_and_update_call_from_tree): Use
gsi_replace_with_seq, instead of inserting itself.
* gimple-iterator.c (gsi_replace_with_seq): New function.
* tree-ssa-forwprop.c (forward_propagate_comparison): Take
iterator instead of statement, advance it.
(ssa_forward_propagate_and_combine): Adjust call to above.
* gimple.h (gimple_bind_body_ptr): New function.
(gimple_bind_body): Use it.
(gimple_catch_handler): Use gimple_catch_handler_ptr.
(gimple_eh_filter_failure_ptr): New function.
(gimple_eh_filter_failure): Use it.
(gimple_eh_else_n_body_ptr): New function.
(gimple_eh_else_n_body): Use it.
(gimple_eh_else_e_body_ptr): New function.
(gimple_eh_else_e_body): Use it.
(gimple_try_eval_ptr): New function.
(gimple_try_eval): Use it.
(gimple_try_cleanup_ptr): New function.
(gimple_try_cleanup): Use it.
(gimple_wce_cleanup_ptr): New function.
(gimple_wce_cleanup): Use it.
(gimple_omp_body_ptr): New function.
(gimple_omp_body): Use it.
(gimple_omp_for_pre_body_ptr): New function.
(gimple_omp_for_pre_body): Use it.
(gimple_transaction_body_ptr): New function.
(gimple_transaction_body): Use it.
(gsi_split_seq_before): Adjust to return nothing and take pointer
to sequence.
(gsi_set_stmt): Declare.
(gsi_replace_with_seq): Declare.
(walk_gimple_seq_mod): Declare.
* function.h (struct function <gimple_body>): Use typedef gimple_seq.
* gimple-iterator.c (gsi_set_stmt): New function.
(gsi_split_seq_before): Return new sequence via pointer argument.
(gsi_replace): Use gsi_set_stmt.
* tree-ssa-loop-im.c (move_computations_stmt): First remove
then insert stmt.
* tree-complex.c (update_complex_components_on_edge): Don't
copy gsi.
* tree-phinodes.c (resize_phi_node): Don't resize stmt in-place,
return new stmt.
(reserve_phi_args_for_new_edge): Change call to above,
use gsi_set_stmt.
* omp-low.c (lower_omp): Change prototype to take pointer to
sequence.
(lower_rec_input_clauses): Use gimple_seq_add_seq instead of
iterators. Adjust call to lower_omp.
(lower_lastprivate_clauses): Adjust call to lower_omp.
(lower_reduction_clauses): Ditto.
(expand_omp_taskreg): Nullify non-cfg body of child_fn.
(lower_omp_sections): Don't explicitely count sequence length,
nullify lowered bodies earlier, ensure stmts are part of only
one sequence, adjust call to lower_omp.
(lower_omp_single): Ensure stmts are part of only one sequence,
adjust call to lower_omp.
(lower_omp_master): Ditto.
(lower_omp_ordered): Ditto.
(lower_omp_critical): Ditto.
(lower_omp_for): Ditto.
(lower_omp_taskreg): Ditto, tidy.
(lower_omp_1): Adjust calls to lower_omp.
(execute_lower_omp): Ditto.
(lower_omp): Adjust to take pointer to sequence.
(diagnose_sb_2): Use walk_gimple_seq_mod.
(diagnose_omp_structured_block_errors): Ditto and set possibly
changed function body.
* gimple-low.c (lower_function_body): Set function body after
it stabilizes.
(lower_sequence): Adjust to take pointer to sequence.
(lower_omp_directive): Ensure stmt isn't put twice into the
sequence, adjust call to lower_sequence.
(lower_stmt): Adjust calls to lower_sequence.
(lower_gimple_bind): Ditto.
(gimple_try_catch_may_fallthru): Call gsi_start with lvalue.
* tree-nested.c (walk_body): Take pointer to sequence, use
walk_gimple_seq_mod.
(walk_function): Adjust call to walk_body, set possibly changed
body.
(walk_gimple_omp_for): Adjust calls to walk_body.
(convert_nonlocal_omp_clauses): Ditto.
(convert_nonlocal_reference_stmt): Ditto.
(convert_local_omp_clauses): Ditto.
(convert_local_reference_stmt): Ditto.
(convert_tramp_reference_stmt): Ditto.
(convert_gimple_call): Ditto.
(convert_nl_goto_reference): Use local iterator copy.
* gimple.c (walk_gimple_seq_mod): Renamed from walk_gimple_seq,
but taking pointer to sequence, ensure gsi_start is called with
callers lvalue.
(walk_gimple_seq): New wrapper around walk_gimple_seq_mod,
asserting that the sequence head didn't change.
(walk_gimple_stmt): Replace all calls to walk_gimple_seq with
walk_gimple_seq_mod.
* trans-mem.c (lower_transaction): Use walk_gimple_seq_mod.
(execute_lower_tm): Ditto, and set possibly changed body.
* tree-eh.c (lower_eh_constructs_1): Take pointer to sequence,
call gsi_start with that lvalue.
(replace_goto_queue_stmt_list): Ditto.
(replace_goto_queue_1): Adjust calls to replace_goto_queue_stmt_list.
(replace_goto_queue): Ditto.
(lower_try_finally_nofallthru): Adjust calls to lower_eh_constructs_1.
(lower_try_finally_onedest): Ditto.
(lower_try_finally_copy): Ditto.
(lower_try_finally_switch): Ditto.
(lower_try_finally): Ditto.
(lower_eh_filter): Ditto.
(lower_eh_must_not_throw): Ditto.
(lower_cleanup): Ditto.
(lower_eh_constructs_2): Ditto.
(lower_catch): Ditto, and ensure gsi_start is called with lvalue.
(lower_eh_constructs): Adjust calls to lower_eh_constructs_1, and
set possibly changed body.
(optimize_double_finally): Call gsi_start with lvalue.
* tree-cfg.c (make_blocks): Adjust call to gsi_split_seq_before.
(gimple_split_block): Ditto.
(gimple_merge_blocks): Use gsi_start_phis.
(move_stmt_r): Use walk_gimple_seq_mod.
* tree-ssa-dse.c (dse_enter_block): Use gsi_last_bb.
* cgraphbuild.c (build_cgraph_edges): Use gsi_start_phis.
(rebuild_cgraph_edges): Ditto.
(cgraph_rebuild_references): Ditto.
* ipa-prop.c (ipa_analyze_params_uses): Ditto.
* tree-inline.c (copy_phis_for_bb): Ditto.
* tree-ssa-dce.c: Ditto.
* cgraphunit.c (cgraph_analyze_function): Use gimple_has_body_p.
Steven Bosscher [Wed, 2 May 2012 12:57:10 +0000 (12:57 +0000)]
re PR middle-end/53153 (ice in tree_low_cst, at tree.c:6569)
gcc/
PR middle-end/53153
* gimplify.c (preprocess_case_label_vec_for_gimple): New function,
split out from ...
(gimplify_switch_expr): ... here.
* gimple.h (preprocess_case_label_vec_for_gimple): Add prototype.
* tree-ssa-forwprop.c (simplify_gimple_switch_label_vec): New function
to clean up case labels with values outside the index type range.
(simplify_gimple_switch): Call it if something changed.
Remove strange and unnecessary assert.
testsuite/
PR middle-end/53153
* gcc.dg/pr53153.c: New test.
* tree.c (valid_constant_size_p): New function.
* tree.h (valid_constant_size_p): Declare.
* cfgexpand.c (expand_one_var): Adjust check for too large
variables by using valid_constant_size_p.
* varasm.c (assemble_variable): Likewise.
c/
* c-decl.c (grokdeclarator): Properly check for sizes that
cover more than half of the address-space.
cp/
* decl.c (grokdeclarator): Properly check for sizes that
cover more than half of the address-space.
2012-05-02 Richard Guenther <rguenther@suse.de>
* fold-const.c (div_if_zero_remainder): sizetypes no longer
sign-extend.
(int_const_binop_1): New worker for int_const_binop with
overflowable parameter. Pass it through
to force_fit_type_double.
(int_const_binop): Wrap around int_const_binop_1 with overflowable
equal to one.
(size_binop_loc): Call int_const_binop_1 with overflowable equal
to minus one, forcing overflow detection for even unsigned types.
(extract_muldiv_1): Remove bogus TYPE_IS_SIZETYPE special-casing.
(fold_binary_loc): Call try_move_mult_to_index with signed offset.
* stor-layout.c (initialize_sizetypes): sizetypes no longer
sign-extend.
(layout_type): For zero-sized arrays ignore overflow on the
size calculations.
* tree-ssa-ccp.c (bit_value_unop_1): Likewise.
(bit_value_binop_1): Likewise.
* tree.c (double_int_to_tree): Likewise.
(double_int_fits_to_tree_p): Likewise.
(force_fit_type_double): Likewise.
(host_integerp): Likewise.
(int_fits_type_p): Likewise.
* varasm.c (output_constructor_regular_field): Sign-extend the
field-offset to cater for negative offsets produced by the Ada frontend.
* omp-low.c (extract_omp_for_data): Convert the loop step to
signed for pointer adjustments.
re PR c/37303 (const compound initializers in structs are written to .data instead of .rodata)
gcc/:
PR c/37303
* c-decl.c (build_compound_literal): Make the decl readonly if it
an array of a readonly type.
* gimplify.c (gimplify_compound_literal_expr): Add fallback
parameter. Change all callers. If the decl is not addressable
and is not an l-value, make it readonly.
gcc/testsuite:
PR c/37303
* gcc.dg/pr37303.c: New test.
Bernd Schmidt [Tue, 1 May 2012 16:34:26 +0000 (16:34 +0000)]
ira.c (allocated_reg_info_size): New static variable.
* ira.c (allocated_reg_info_size): New static variable.
(expand_reg_info): Manage it. Call
setup_preferred_alternate_classes_for_new_pseudos.
(ira): Don't do it here. Remove local allocated_reg_info_size,
set the global before calling find_moveable_pseudos.
(find_moveable_pseudos): Call expand_reg_info rather than
resize_reg_info.
Alan Modra [Tue, 1 May 2012 04:03:21 +0000 (13:33 +0930)]
re PR target/53038 (cfi_restore for cr before cr is actually restored)
PR target/53038
* config/rs6000/rs6000.c (load_lr_save, restore_saved_lr,
load_cr_save, add_crlr_cfa_restore): New functions.
(rs6000_restore_saved_cr): Rename to..
(restore_saved_cr): ..this. Add cfa_restore notes for cr.
(rs6000_emit_epilogue): Use new functions. Adjust condition
for emitting lr and cr cfa_restore. Emit cfa_restores for fp
regs when using out-of-line restore only when shrink wrapping.