Linus Torvalds [Fri, 6 Dec 2024 19:27:10 +0000 (11:27 -0800)]
Merge tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
Linus Torvalds [Fri, 6 Dec 2024 19:24:00 +0000 (11:24 -0800)]
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
Linus Torvalds [Thu, 5 Dec 2024 23:11:39 +0000 (15:11 -0800)]
Merge tag 'audit-pr-20241205' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit build problem workaround from Paul Moore:
"A minor audit patch that shuffles some code slightly to workaround a
GCC bug affecting a number of people.
The GCC folks have been able to reproduce the problem and are
discussing solutions (see the bug report link in the commit), but
since the workaround is trivial let's do that in the kernel so we can
unblock people who are hitting this"
* tag 'audit-pr-20241205' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: workaround a GCC bug triggered by task comm changes
Linus Torvalds [Thu, 5 Dec 2024 23:02:20 +0000 (15:02 -0800)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
Linus Torvalds [Thu, 5 Dec 2024 22:38:49 +0000 (14:38 -0800)]
Merge tag 'v6.13-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Three fixes for potential out of bound accesses in read and write
paths (e.g. when alternate data streams enabled)
- GCC 15 build fix
* tag 'v6.13-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: align aux_payload_buf to avoid OOB reads in cryptographic operations
ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write
ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read
smb: server: Fix building with GCC 15
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
Linus Torvalds [Thu, 5 Dec 2024 18:17:55 +0000 (10:17 -0800)]
Merge tag 'trace-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix trace histogram sort function cmp_entries_dup()
The sort function cmp_entries_dup() returns either 1 or 0, and not -1
if parameter "a" is less than "b" by memcmp().
- Fix archs that call trace_hardirqs_off() without RCU watching
Both x86 and arm64 no longer call any tracepoints with RCU not
watching. It was assumed that it was safe to get rid of
trace_*_rcuidle() version of the tracepoint calls. This was needed to
get rid of the SRCU protection and be able to implement features like
faultable traceponits and add rust tracepoints.
Unfortunately, there were a few architectures that still relied on
that logic. There's only one file that has tracepoints that are
called without RCU watching. Add macro logic around the tracepoints
for architectures that do not have CONFIG_ARCH_WANTS_NO_INSTR defined
will check if the code is in the idle path (the only place RCU isn't
watching), and enable RCU around calling the tracepoint, but only do
it if the tracepoint is enabled.
* tag 'trace-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix archs that still call tracepoints without RCU watching
tracing: Fix cmp_entries_dup() to respect sort() comparison rules
Linus Torvalds [Thu, 5 Dec 2024 18:06:47 +0000 (10:06 -0800)]
Merge tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
Linus Torvalds [Thu, 5 Dec 2024 18:03:43 +0000 (10:03 -0800)]
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
Steven Rostedt [Wed, 4 Dec 2024 15:04:14 +0000 (10:04 -0500)]
tracing: Fix archs that still call tracepoints without RCU watching
Tracepoints require having RCU "watching" as it uses RCU to do updates to
the tracepoints. There are some cases that would call a tracepoint when
RCU was not "watching". This was usually in the idle path where RCU has
"shutdown". For the few locations that had tracepoints without RCU
watching, there was an trace_*_rcuidle() variant that could be used. This
used SRCU for protection.
There are tracepoints that trace when interrupts and preemption are
enabled and disabled. In some architectures, these tracepoints are called
in a path where RCU is not watching. When x86 and arm64 removed these
locations, it was incorrectly assumed that it would be safe to remove the
trace_*_rcuidle() variant and also remove the SRCU logic, as it made the
code more complex and harder to implement new tracepoint features (like
faultable tracepoints and tracepoints in rust).
Instead of bringing back the trace_*_rcuidle(), as it will not be trivial
to do as new code has already been added depending on its removal, add a
workaround to the one file that still requires it (trace_preemptirq.c). If
the architecture does not define CONFIG_ARCH_WANTS_NO_INSTR, then check if
the code is in the idle path, and if so, call ct_irq_enter/exit() which
will enable RCU around the tracepoint.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/20241204100414.4d3e06d0@gandalf.local.home Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 48bcda684823 ("tracing: Remove definition of trace_*_rcuidle()") Closes: https://lore.kernel.org/all/bddb02de-957a-4df5-8e77-829f55728ea2@roeck-us.net/ Acked-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Shradha Gupta [Wed, 4 Dec 2024 05:48:20 +0000 (21:48 -0800)]
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
The current requested response version(V1) for MANA_QUERY_GF_STAT query
results in STATISTICS_FLAGS_TX_ERRORS_GDMA_ERROR value being set to
0 always.
In order to get the correct value for this counter we request the response
version to be V2.
Cc: stable@vger.kernel.org Fixes: e1df5202e879 ("net :mana :Add remaining GDMA stats for MANA to ethtool") Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1733291300-12593-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buggy address belongs to the object at ffff888043eba000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 432 bytes inside of
freed 2048-byte region [ffff888043eba000, ffff888043eba800)
Fixes: 8c55facecd7a ("net: linkwatch: only report IF_OPER_LOWERLAYERDOWN if iflink is actually down") Reported-by: syzbot+1939f24bdb783e9e43d9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/674f3a18.050a0220.48a03.0041.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241203170933.2449307-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 5 Dec 2024 10:49:14 +0000 (11:49 +0100)]
Merge tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Parameters were created using wrong C types, which caused them to be of
wrong size on some architectures, causing problems.
The problem with SO_RCVLOWAT was found on s390 (big endian), while x86-64
didn't show it. After the fix, all tests pass on s390.
Then Stefano Garzarella pointed out that SO_VM_SOCKETS_* calls might have
a similar problem, which turned out to be true, hence, the second patch.
Changes for v8:
- Fix whitespace warnings from "checkpatch.pl --strict"
- Add maintainers to Cc:
Changes for v7:
- Rebase on top of https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
- Add the "net" tags to the subjects
Changes for v6:
- rework the patch #3 to avoid creating a new file for new functions,
and exclude vsock_perf from calling the new functions.
- add "Reviewed-by:" to the patch #2.
Changes for v5:
- in the patch #2 replace the introduced uint64_t with unsigned long long
to match documentation
- add a patch #3 that verifies every setsockopt() call.
Changes for v4:
- add "Reviewed-by:" to the first patch, and add a second patch fixing
SO_VM_SOCKETS_* calls, which depends on the first one (hence, it's now
a patch series.)
Changes for v3:
- fix the same problem in vsock_perf and update commit message
Changes for v2:
- add "Fixes:" lines to the commit message
====================
vsock/test: verify socket options after setting them
Replace setsockopt() calls with calls to functions that follow
setsockopt() with getsockopt() and check that the returned value and its
size are the same as have been set. (Except in vsock_perf.)
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Fixes: 685a21c314a8 ("test/vsock: add big message test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fbae ("vsock_test: POLLIN + SO_RCVLOWAT test") Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic") Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yafang shao [Thu, 5 Dec 2024 02:11:00 +0000 (10:11 +0800)]
audit: workaround a GCC bug triggered by task comm changes
A build failure has been reported with the following details:
In file included from include/linux/string.h:390,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:63,
from include/linux/wait.h:9,
from include/linux/wait_bit.h:8,
from include/linux/fs.h:6,
from kernel/auditsc.c:37:
In function 'sized_strscpy',
inlined from '__audit_ptrace' at kernel/auditsc.c:2732:2:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
In function 'sized_strscpy',
inlined from 'audit_signal_info_syscall' at kernel/auditsc.c:2759:3:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
The issue appears to be a GCC bug, though the root cause remains
unclear at this time. For now, let's implement a workaround.
A bug report has also been filed with GCC [0].
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117912 Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410171420.1V00ICVG-lkp@intel.com/ Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org> Closes: https://lore.kernel.org/all/20241128182435.57a1ea6f@gandalf.local.home/ Reported-by: Zhuo, Qiuxu <qiuxu.zhuo@intel.com> Closes: https://lore.kernel.org/all/CY8PR11MB71348E568DBDA576F17DAFF389362@CY8PR11MB7134.namprd11.prod.outlook.com/ Originally-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/linux-hardening/202410171059.C2C395030@keescook/ Signed-off-by: Yafang shao <laoar.shao@gmail.com> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Yafang Shao <laoar.shao@gmail.com>
[PM: subject tweak, description line wrapping] Signed-off-by: Paul Moore <paul@paul-moore.com>
This series contains updates to ice, idpf, ixgbe, ixgbevf, and igb
drivers.
For ice:
Arkadiusz corrects search for determining whether PHY clock recovery is
supported on the device.
Przemyslaw corrects mask used for PHY timestamps on ETH56G devices.
Wojciech adds missing virtchnl ops which caused NULL pointer
dereference.
Marcin fixes VLAN filter settings for uplink VSI in switchdev mode.
For idpf:
Josh restores setting of completion tag for empty buffers.
For ixgbevf:
Jake removes incorrect initialization/support of IPSEC for mailbox
version 1.5.
For ixgbe:
Jake rewords and downgrades misleading message when negotiation
of VF mailbox version is not supported.
Tore Amundsen corrects value for BASE-BX10 capability.
For igb:
Yuan Can adds proper teardown on failed pci_register_driver() call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Fix potential invalid memory access in igb_init_module()
ixgbe: Correct BASE-BX10 compliance code
ixgbe: downgrade logging of unsupported VF API version to debug
ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5
idpf: set completion tag for "empty" bufs associated with a packet
ice: Fix VLAN pruning in switchdev mode
ice: Fix NULL pointer dereference in switchdev
ice: fix PHY timestamp extraction for ETH56G
ice: fix PHY Clock Recovery availability check
====================
Jianbo Liu [Tue, 3 Dec 2024 20:49:20 +0000 (22:49 +0200)]
net/mlx5e: Remove workaround to avoid syndrome for internal port
Previously a workaround was added to avoid syndrome 0xcdb051. It is
triggered when offload a rule with tunnel encapsulation, and
forwarding to another table, but not matching on the internal port in
firmware steering mode. The original workaround skips internal tunnel
port logic, which is not correct as not all cases are considered. As
an example, if vlan is configured on the uplink port, traffic can't
pass because vlan header is not added with this workaround. Besides,
there is no such issue for software steering. So, this patch removes
that, and returns error directly if trying to offload such rule for
firmware steering.
Fixes: 06b4eac9c4be ("net/mlx5e: Don't offload internal port if filter device is out device") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Tested-by: Frode Nordahl <frode.nordahl@canonical.com> Reviewed-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20241203204920.232744-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan [Tue, 3 Dec 2024 20:49:19 +0000 (22:49 +0200)]
net/mlx5e: SD, Use correct mdev to build channel param
In a multi-PF netdev, each traffic channel creates its own resources
against a specific PF.
In the cited commit, where this support was added, the channel_param
logic was mistakenly kept unchanged, so it always used the primary PF
which is found at priv->mdev.
In this patch we fix this by moving the logic to be per-channel, and
passing the correct mdev instance.
This bug happened to be usually harmless, as the resulting cparam
structures would be the same for all channels, due to identical FW logic
and decisions.
However, in some use cases, like fwreset, this gets broken.
This could lead to different symptoms. Example:
Error cqe on cqn 0x428, ci 0x0, qn 0x10a9, opcode 0xe, syndrome 0x4,
vendor syndrome 0x32
Fixes: e4f9686bdee7 ("net/mlx5e: Let channels be SD-aware") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20241203204920.232744-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
Fix the mentioned commit change for MPV mode, since in MPV mode the IB
device is shared between different core devices, so under this change
when moving both devices simultaneously to switchdev mode the IB device
removal and re-addition can race with itself causing unexpected behavior.
In such case do rescan_drivers() only once in order to add the ethernet
representor auxiliary device, and skip adding and removing IB devices.
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
In case that IB device is already disabled when moving to switchdev mode,
which can happen when working with LAG, need to do rescan_drivers()
before leaving in order to add ethernet representor auxiliary device.
====================
bnxt_en: support header page pool in queue API
Commit 7ed816be35ab ("eth: bnxt: use page pool for head frags") added a
separate page pool for header frags. Now, frags are allocated from this
header page pool e.g. rxr->tpa_info.data.
The queue API did not properly handle rxr->tpa_info and so using the
queue API to i.e. reset any queues will result in pages being returned
to the incorrect page pool, causing inflight != 0 warnings.
Fix this bug by properly allocating/freeing tpa_info and copying/freeing
head_pool in the queue API implementation.
The 1st patch is a prep patch that refactors helpers out to be used by
the implementation patch later.
The 2nd patch is a drive-by refactor. Happy to take it out and re-send
to net-next if there are any objections.
The 3rd patch is the implementation patch that will properly alloc/free
rxr->tpa_info.
====================
David Wei [Wed, 4 Dec 2024 04:10:22 +0000 (20:10 -0800)]
bnxt_en: handle tpa_info in queue API implementation
Commit 7ed816be35ab ("eth: bnxt: use page pool for head frags") added a
page pool for header frags, which may be distinct from the existing pool
for the aggregation ring. Prior to this change, frags used in the TPA
ring rx_tpa were allocated from system memory e.g. napi_alloc_frag()
meaning their lifetimes were not associated with a page pool. They can
be returned at any time and so the queue API did not alloc or free
rx_tpa.
But now frags come from a separate head_pool which may be different to
page_pool. Without allocating and freeing rx_tpa, frags allocated from
the old head_pool may be returned to a different new head_pool which
causes a mismatch between the pp hold/release count.
Fix this problem by properly freeing and allocating rx_tpa in the queue
API implementation.
Ido Schimmel [Tue, 3 Dec 2024 15:16:05 +0000 (16:16 +0100)]
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Kory Maincent [Mon, 2 Dec 2024 15:33:57 +0000 (16:33 +0100)]
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit 6699170376ab ("ethtool: fix application of verbose no_mask bitset") fixes
this issue by clearing the whole target bitmap before we start iterating.
The solution proposed brought an issue with the behavior of the mod
variable. As the bitset is always cleared the old value will always
differ to the new value.
Fix it by adding a new function to compare bitmaps and a temporary variable
which save the state of the old bitmap.
The root cause is a network namespace creation failing after successful
initialization of the ipmr subsystem. Such a case is not currently
matched by the ipmr_can_free_table() helper.
New namespaces are zeroed on allocation and inserted into net ns list
only after successful creation; when deleting an ipmr table, the list
next pointer can be NULL only on netns initialization failure.
Update the ipmr_can_free_table() checks leveraging such condition.
Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/8bde975e21bbca9d9c27e36209b2dd4f1d7a3f00.1733212078.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Norbert Szetei [Sat, 30 Nov 2024 15:56:14 +0000 (16:56 +0100)]
ksmbd: align aux_payload_buf to avoid OOB reads in cryptographic operations
The aux_payload_buf allocation in SMB2 read is performed without ensuring
alignment, which could result in out-of-bounds (OOB) reads during
cryptographic operations such as crypto_xor or ghash. This patch aligns
the allocation of aux_payload_buf to prevent these issues.
(Note that to add this patch to stable would require modifications due
to recent patch "ksmbd: use __GFP_RETRY_MAYFAIL")
Signed-off-by: Norbert Szetei <norbert@doyensec.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
netfilter: nft_set_hash: skip duplicated elements pending gc run
rhashtable does not provide stable walk, duplicated elements are
possible in case of resizing. I considered that checking for errors when
calling rhashtable_walk_next() was sufficient to detect the resizing.
However, rhashtable_walk_next() returns -EAGAIN only at the end of the
iteration, which is too late, because a gc work containing duplicated
elements could have been already scheduled for removal to the worker.
Add a u32 gc worker sequence number per set, bump it on every workqueue
run. Annotate gc worker sequence number on the expired element. Use it
to skip those already seen in this gc workqueue run.
Note that this new field is never reset in case gc transaction fails, so
next gc worker run on the expired element overrides it. Wraparound of gc
worker sequence number should not be an issue with stale gc worker
sequence number in the element, that would just postpone the element
removal in one gc run.
Note that it is not possible to use flags to annotate that element is
pending gc run to detect duplicates, given that gc transaction can be
invalidated in case of update from the control plane, therefore, not
allowing to clear such flag.
On x86_64, pahole reports no changes in the size of nft_rhash_elem.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch> Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 4 Dec 2024 18:31:37 +0000 (10:31 -0800)]
Merge tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about EFI screen info, hugetlb pte clear and Lockdep-RCU
splat in KVM, plus some trival cleanups"
* tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Protect kvm_io_bus_{read,write}() with SRCU
LoongArch: KVM: Protect kvm_check_requests() with SRCU
LoongArch: BPF: Adjust the parameter of emit_jirl()
LoongArch: Add architecture specific huge_pte_clear()
LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values
LoongArch: Fix reserving screen info memory for above-4G firmware
* tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: Ignore unknown event 0xCF
platform/x86: asus-wmi: Ignore return value when writing thermal policy
platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
Kuan-Wei Chiu [Tue, 3 Dec 2024 20:22:28 +0000 (04:22 +0800)]
tracing: Fix cmp_entries_dup() to respect sort() comparison rules
The cmp_entries_dup() function used as the comparator for sort()
violated the symmetry and transitivity properties required by the
sorting algorithm. Specifically, it returned 1 whenever memcmp() was
non-zero, which broke the following expectations:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
These violations could lead to incorrect sorting and failure to
correctly identify duplicate elements.
Fix the issue by directly returning the result of memcmp(), which
adheres to the required comparison properties.
Phil Sutter [Fri, 29 Nov 2024 15:30:38 +0000 (16:30 +0100)]
netfilter: ipset: Hold module reference while requesting a module
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lion Ackermann [Mon, 2 Dec 2024 16:22:57 +0000 (17:22 +0100)]
net: sched: fix ordering of qlen adjustment
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 2 Dec 2024 15:21:38 +0000 (10:21 -0500)]
net: sched: fix erspan_opt settings in cls_flower
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Mon, 2 Dec 2024 16:48:05 +0000 (18:48 +0200)]
ethtool: Fix access to uninitialized fields in set RXNFC command
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Revert "udp: avoid calling sock_def_readable() if possible"
This reverts commit 612b1c0dec5bc7367f90fc508448b8d0d7c05414. On a
scenario with multiple threads blocking on a recvfrom(), we need to call
sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the
threads won't be woken up as __skb_wait_for_more_packets() is using
prepare_to_wait_exclusive().
Joe Damato [Mon, 2 Dec 2024 18:21:02 +0000 (18:21 +0000)]
net: Make napi_hash_lock irq safe
Make napi_hash_lock IRQ safe. It is used during the control path, and is
taken and released in napi_hash_add and napi_hash_del, which will
typically be called by calls to napi_enable and napi_disable.
This change avoids a deadlock in pcnet32 (and other any other drivers
which follow the same pattern):
CPU 0:
pcnet32_open
spin_lock_irqsave(&lp->lock, ...)
napi_enable
napi_hash_add <- before this executes, CPU 1 proceeds
spin_lock(napi_hash_lock)
[...]
spin_unlock_irqrestore(&lp->lock, flags);
netfilter: nft_inner: incorrect percpu area handling under softirq
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Tue, 3 Dec 2024 19:02:17 +0000 (11:02 -0800)]
Merge tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotations for io_uring/encoded read integration, inode
lock is held when returning to userspace
- properly reflect experimental config option to sysfs
- handle NULL root in case the rescue mode accepts invalid/damaged tree
roots (rescue=ibadroot)
- regression fix of a deadlock between transaction and extent locks
- fix pending bio accounting bug in encoded read ioctl
- fix NOWAIT mode when checking references for NOCOW files
- fix use-after-free in a rb-tree cleanup in ref-verify debugging tool
* tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep warnings on io_uring encoded reads
btrfs: ref-verify: fix use-after-free after invalid ref action
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
btrfs: don't loop for nowait writes when checking for cross references
btrfs: sysfs: advertise experimental features only if CONFIG_BTRFS_EXPERIMENTAL=y
btrfs: fix deadlock between transaction commits and extent locks
btrfs: fix use-after-free in btrfs_encoded_read_endio()
Linus Torvalds [Tue, 3 Dec 2024 18:50:22 +0000 (10:50 -0800)]
Merge tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf fixes from Jan Kara:
"Two small UDF fixes for better handling of corrupted filesystem and a
quota fix to fix handling of filesystem freezing"
* tag 'fs_for_v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Verify inode link counts before performing rename
udf: Skip parent dir link count update if corrupted
quota: flush quota_release_work upon quota writeback
Linus Torvalds [Tue, 3 Dec 2024 18:46:49 +0000 (10:46 -0800)]
Merge tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Use xchg() in xlog_cil_insert_pcp_aggregate()
- Fix ABBA deadlock on a race between mount and log shutdown
- Fix quota softlimit incoherency on delalloc
- Fix sparse inode limits on runt AG
- remove unknown compat feature checks in SB write valdation
- Eliminate a lockdep false positive
* tag 'xfs-fixes-6.13-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't call xfs_bmap_same_rtgroup in xfs_bmap_add_extent_hole_delay
xfs: Use xchg() in xlog_cil_insert_pcp_aggregate()
xfs: prevent mount and log shutdown race
xfs: delalloc and quota softlimit timers are incoherent
xfs: fix sparse inode limits on runt AG
xfs: remove unknown compat feature check in superblock write validation
xfs: eliminate lockdep false positives in xfs_attr_shortform_list
Yuan Can [Wed, 23 Oct 2024 12:10:48 +0000 (20:10 +0800)]
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access.
Fixes: bbd98fe48a43 ("igb: Fix DCA errors and do not use context index for 82576") Signed-off-by: Yuan Can <yuancan@huawei.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tore Amundsen [Fri, 15 Nov 2024 14:17:36 +0000 (14:17 +0000)]
ixgbe: Correct BASE-BX10 compliance code
SFF-8472 (section 5.4 Transceiver Compliance Codes) defines bit 6 as
BASE-BX10. Bit 6 means a value of 0x40 (decimal 64).
The current value in the source code is 0x64, which appears to be a
mix-up of hex and decimal values. A value of 0x64 (binary 01100100)
incorrectly sets bit 2 (1000BASE-CX) and bit 5 (100BASE-FX) as well.
Fixes: 1b43e0d20f2d ("ixgbe: Add 1000BASE-BX support") Signed-off-by: Tore Amundsen <tore@amundsen.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Ernesto Castellotti <ernesto@castellotti.net> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Fri, 1 Nov 2024 23:05:43 +0000 (16:05 -0700)]
ixgbe: downgrade logging of unsupported VF API version to debug
The ixgbe PF driver logs an info message when a VF attempts to negotiate an
API version which it does not support:
VF 0 requested invalid api version 6
The ixgbevf driver attempts to load with mailbox API v1.5, which is
required for best compatibility with other hosts such as the ESX VMWare PF.
The Linux PF only supports API v1.4, and does not currently have support
for the v1.5 API.
The logged message can confuse users, as the v1.5 API is valid, but just
happens to not currently be supported by the Linux PF.
Downgrade the info message to a debug message, and fix the language to
use 'unsupported' instead of 'invalid' to improve message clarity.
Long term, we should investigate whether the improvements in the v1.5 API
make sense for the Linux PF, and if so implement them properly. This may
require yet another API version to resolve issues with negotiating IPSEC
offload support.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reported-by: Yifei Liu <yifei.l.liu@oracle.com> Link: https://lore.kernel.org/intel-wired-lan/20240301235837.3741422-1-yifei.l.liu@oracle.com/ Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Fri, 1 Nov 2024 23:05:42 +0000 (16:05 -0700)]
ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") added support for v1.5 of the PF to VF mailbox
communication API. This commit mistakenly enabled IPSEC offload for API
v1.5.
No implementation of the v1.5 API has support for IPSEC offload. This
offload is only supported by the Linux PF as mailbox API v1.4. In fact, the
v1.5 API is not implemented in any Linux PF.
Attempting to enable IPSEC offload on a PF which supports v1.5 API will not
work. Only the Linux upstream ixgbe and ixgbevf support IPSEC offload, and
only as part of the v1.4 API.
Fix the ixgbevf Linux driver to stop attempting IPSEC offload when
the mailbox API does not support it.
The existing API design choice makes it difficult to support future API
versions, as other non-Linux hosts do not implement IPSEC offload. If we
add support for v1.5 to the Linux PF, then we lose support for IPSEC
offload.
A full solution likely requires a new mailbox API with a proper negotiation
to check that IPSEC is actually supported by the host.
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Joshua Hay [Mon, 7 Oct 2024 20:24:35 +0000 (13:24 -0700)]
idpf: set completion tag for "empty" bufs associated with a packet
Commit d9028db618a6 ("idpf: convert to libeth Tx buffer completion")
inadvertently removed code that was necessary for the tx buffer cleaning
routine to iterate over all buffers associated with a packet.
When a frag is too large for a single data descriptor, it will be split
across multiple data descriptors. This means the frag will span multiple
buffers in the buffer ring in order to keep the descriptor and buffer
ring indexes aligned. The buffer entries in the ring are technically
empty and no cleaning actions need to be performed. These empty buffers
can precede other frags associated with the same packet. I.e. a single
packet on the buffer ring can look like:
The cleaning routine iterates through these buffers based on a matching
completion tag. If the completion tag is not set for buf2, the loop will
end prematurely. Frag2 will be left uncleaned and next_to_clean will be
left pointing to the end of packet, which will break the cleaning logic
for subsequent cleans. This consequently leads to tx timeouts.
Assign the empty bufs the same completion tag for the packet to ensure
the cleaning routine iterates over all of the buffers associated with
the packet.
Fixes: d9028db618a6 ("idpf: convert to libeth Tx buffer completion") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Madhu chittim <madhu.chittim@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Marcin Szycik [Mon, 4 Nov 2024 18:49:09 +0000 (19:49 +0100)]
ice: Fix VLAN pruning in switchdev mode
In switchdev mode the uplink VSI should receive all unmatched packets,
including VLANs. Therefore, VLAN pruning should be disabled if uplink is
in switchdev mode. It is already being done in ice_eswitch_setup_env(),
however the addition of ice_up() in commit 44ba608db509 ("ice: do
switchdev slow-path Rx using PF VSI") caused VLAN pruning to be
re-enabled after disabling it.
Add a check to ice_set_vlan_filtering_features() to ensure VLAN
filtering will not be enabled if uplink is in switchdev mode. Note that
ice_is_eswitch_mode_switchdev() is being used instead of
ice_is_switchdev_running(), as the latter would only return true after
the whole switchdev setup completes.
Fixes: 44ba608db509 ("ice: do switchdev slow-path Rx using PF VSI") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Priya Singh <priyax.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wojciech Drewek [Tue, 29 Oct 2024 09:42:59 +0000 (10:42 +0100)]
ice: Fix NULL pointer dereference in switchdev
Commit 608a5c05c39b ("virtchnl: support queue rate limit and quanta
size configuration") introduced new virtchnl ops:
- get_qos_caps
- cfg_q_bw
- cfg_q_quanta
New ops were added to ice_virtchnl_dflt_ops, in
commit 015307754a19 ("ice: Support VF queue rate limit and quanta
size configuration"), but not to the ice_virtchnl_repr_ops. Because
of that, if we get one of those messages in switchdev mode we end up
with NULL pointer dereference:
To check if PHY Clock Recovery mechanic is available for a device, there
is a need to verify if given PHY is available within the netlist, but the
netlist node type used for the search is wrong, also the search context
shall be specified.
Modify the search function to allow specifying the context in the
search.
Use the PHY node type instead of CLOCK CONTROLLER type, also use proper
search context which for PHY search is PORT, as defined in E810
Datasheet [1] ('3.3.8.2.4 Node Part Number and Node Options (0x0003)' and
'Table 3-105. Program Topology Device NVM Admin Command').
Jason Gunthorpe [Tue, 12 Nov 2024 18:51:36 +0000 (14:51 -0400)]
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
Be specific about what fields should be accessed in the idr result and
give other guidance to the VMM on how it should generate the
vIDR. Discussion on the list, and review of the qemu implementation
understood this needs to be clearer and more detailed.
Masahiro Yamada [Tue, 3 Dec 2024 10:21:07 +0000 (19:21 +0900)]
module: Convert default symbol namespace to string literal
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Masahiro Yamada [Tue, 3 Dec 2024 10:21:05 +0000 (19:21 +0900)]
scripts/nsdeps: get 'make nsdeps' working again
Since commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal"), when MODULE_IMPORT_NS() is missing, 'make nsdeps' inserts
pointless code:
MODULE_IMPORT_NS("ns");
Here, "ns" is not a namespace, but the variable in the semantic patch.
It must not be quoted. Instead, a string literal must be passed to
Coccinelle.
Fixes: cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolin Chen [Tue, 3 Dec 2024 08:02:54 +0000 (00:02 -0800)]
iommufd: Fix out_fput in iommufd_fault_alloc()
As fput() calls the file->f_op->release op, where fault obj and ictx are
getting released, there is no need to release these two after fput() one
more time, which would result in imbalanced refcounts:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230
Call trace:
refcount_warn_saturate+0x60/0x230 (P)
refcount_warn_saturate+0x60/0x230 (L)
iommufd_fault_fops_release+0x9c/0xe0 [iommufd]
...
VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd])
WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0
Call trace:
filp_flush+0x3c/0xf0 (P)
filp_flush+0x3c/0xf0 (L)
__arm64_sys_close+0x34/0x98
...
imbalanced put on file reference count
WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138
Call trace:
__file_ref_put+0x100/0x138 (P)
__file_ref_put+0x100/0x138 (L)
__fput_sync+0x4c/0xd0
Randy Dunlap [Thu, 28 Nov 2024 03:51:59 +0000 (19:51 -0800)]
iommufd: Fix typos in kernel-doc comments
Fix typos/spellos in kernel-doc comments for readability.
Fixes: aad37e71d5c4 ("iommufd: IOCTLs for the io_pagetable") Fixes: b7a0855eb95f ("iommu: Add new flag to explictly request PASID capable domain") Fixes: d68beb276ba2 ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object") Link: https://patch.msgid.link/r/20241128035159.374624-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cong Wang [Fri, 29 Nov 2024 21:25:19 +0000 (13:25 -0800)]
rtnetlink: fix double call of rtnl_link_get_net_ifla()
Currently rtnl_link_get_net_ifla() gets called twice when we create
peer devices, once in rtnl_add_peer_net() and once in each ->newlink()
implementation.
This looks safer, however, it leads to a classic Time-of-Check to
Time-of-Use (TOCTOU) bug since IFLA_NET_NS_PID is very dynamic. And
because of the lack of checking error pointer of the second call, it
also leads to a kernel crash as reported by syzbot.
Fix this by getting rid of the second call, which already becomes
redudant after Kuniyuki's work. We have to propagate the result of the
first rtnl_link_get_net_ifla() down to each ->newlink().
Reported-by: syzbot+21ba4d5adff0b6a7cfc6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=21ba4d5adff0b6a7cfc6 Fixes: 0eb87b02a705 ("veth: Set VETH_INFO_PEER to veth_link_ops.peer_type.") Fixes: 6b84e558e95d ("vxcan: Set VXCAN_INFO_PEER to vxcan_link_ops.peer_type.") Fixes: fefd5d082172 ("netkit: Set IFLA_NETKIT_PEER_INFO to netkit_link_ops.peer_type.") Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241129212519.825567-1-xiyou.wangcong@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Louis Leseur [Thu, 28 Nov 2024 08:33:58 +0000 (09:33 +0100)]
net/qed: allow old cards not supporting "num_images" to work
Commit 43645ce03e00 ("qed: Populate nvm image attribute shadow.")
added support for populating flash image attributes, notably
"num_images". However, some cards were not able to return this
information. In such cases, the driver would return EINVAL, causing the
driver to exit.
Add check to return EOPNOTSUPP instead of EINVAL when the card is not
able to return these information. The caller function already handles
EOPNOTSUPP without error.
Wen Gu [Wed, 27 Nov 2024 13:30:14 +0000 (21:30 +0800)]
net/smc: fix LGR and link use-after-free issue
We encountered a LGR/link use-after-free issue, which manifested as
the LGR/link refcnt reaching 0 early and entering the clear process,
making resource access unsafe.
It is caused by repeated release of LGR/link refcnt. One suspect is that
smc_conn_free() is called repeatedly because some smc_conn_free() from
server listening path are not protected by sock lock.
So here add sock lock protection in smc_listen_work() path, making it
exclusive with other connection operations.
Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc") Co-developed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Co-developed-by: Kai <KaiShen@linux.alibaba.com> Signed-off-by: Kai <KaiShen@linux.alibaba.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
So fix this by initializing close_work before establishing the
connection.
Fixes: 46c28dbd4c23 ("net/smc: no socket state changes in tasklet context") Fixes: 413498440e30 ("net/smc: add SMC-D support in af_smc") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]
When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().
tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count. However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.
Let's move the decrement after releasing the socket in
cleanup_bearer().
[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
sk_alloc+0x438/0x608
inet_create+0x4c8/0xcb0
__sock_create+0x350/0x6b8
sock_create_kern+0x58/0x78
udp_sock_create4+0x68/0x398
udp_sock_create+0x88/0xc8
tipc_udp_enable+0x5e8/0x848
__tipc_nl_bearer_enable+0x84c/0xed8
tipc_nl_bearer_enable+0x38/0x60
genl_family_rcv_msg_doit+0x170/0x248
genl_rcv_msg+0x400/0x5b0
netlink_rcv_skb+0x1dc/0x398
genl_rcv+0x44/0x68
netlink_unicast+0x678/0x8b0
netlink_sendmsg+0x5e4/0x898
____sys_sendmsg+0x500/0x830
If dccp_feat_push_confirm() fails after new value for SP feature was accepted
without reconciliation ('entry == NULL' branch), memory allocated for that value
with dccp_feat_clone_sp_val() is never freed.
Jiri Wiesner [Thu, 28 Nov 2024 08:59:50 +0000 (09:59 +0100)]
net/ipv6: release expired exception dst cached in socket
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst.
Oleksij Rempel [Mon, 25 Nov 2024 08:40:50 +0000 (09:40 +0100)]
net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850
Fix outdated MII_LPA data in the LAN88xx PHY, which is used in LAN7800
and LAN7850 USB Ethernet controllers. Due to a hardware limitation, the
PHY cannot reliably update link status after parallel detection when the
link partner does not support auto-negotiation. To mitigate this, add a
PHY reset in `lan88xx_link_change_notify()` when `phydev->state` is
`PHY_NOLINK`, ensuring the PHY starts in a clean state and reports
accurate fixed link parallel detection results.
Jakub Kicinski [Tue, 3 Dec 2024 02:04:10 +0000 (18:04 -0800)]
Merge tag 'linux-can-fixes-for-6.13-20241202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-12-02
The first patch is by me and allows the use of sleeping GPIOs to set
termination GPIOs.
Alexander Kozhinov fixes the gs_usb driver to use the endpoints
provided by the usb endpoint descriptions instead of hard coded ones.
Dario Binacchi contributes 11 statistics related patches for various
CAN driver. A potential use after free in the hi311x is fixed. The
statistics for the c_can, sun4i_can, hi311x, m_can, ifi_canfd,
sja1000, sun4i_can, ems_usb, f81604 are fixed: update statistics even
if the allocation of the error skb fails and fix the incrementing of
the rx,tx error counters.
A patch by me fixes the workaround for DS80000789E 6 erratum in the
mcp251xfd driver.
The last patch is by Dmitry Antipov, targets the j1939 CAN protocol
and fixes a skb reference counting issue.
* tag 'linux-can-fixes-for-6.13-20241202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: j1939_session_new(): fix skb reference counting
can: mcp251xfd: mcp251xfd_get_tef_len(): work around erratum DS80000789E 6.
can: f81604: f81604_handle_can_bus_errors(): fix {rx,tx}_errors statistics
can: ems_usb: ems_usb_rx_err(): fix {rx,tx}_errors statistics
can: sun4i_can: sun4i_can_err(): fix {rx,tx}_errors statistics
can: sja1000: sja1000_err(): fix {rx,tx}_errors statistics
can: hi311x: hi3110_can_ist(): fix {rx,tx}_errors statistics
can: ifi_canfd: ifi_canfd_handle_lec_err(): fix {rx,tx}_errors statistics
can: m_can: m_can_handle_lec_err(): fix {rx,tx}_errors statistics
can: hi311x: hi3110_can_ist(): update state error statistics if skb allocation fails
can: hi311x: hi3110_can_ist(): fix potential use-after-free
can: sun4i_can: sun4i_can_err(): call can_change_state() even if cf is NULL
can: c_can: c_can_handle_bus_err(): update statistics if skb allocation fails
can: gs_usb: add usb endpoint address detection at driver probe step
can: dev: can_set_termination(): allow sleeping GPIOs
====================
Peter Zijlstra [Mon, 2 Dec 2024 14:59:47 +0000 (15:59 +0100)]
module: Convert symbol namespace to string literal
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
The correct way is to wait handshake, but it needs BUS clock of
BLK-CTL be enabled, which is in separate driver. So delay is the
only option here. The udelay(10) is a data got by experiment.
Fixes: e8dc41afca16 ("pmdomain: imx: gpcv2: Add delay after power up handshake") Reported-by: Francesco Dolcini <francesco@dolcini.it> Closes: https://lore.kernel.org/lkml/20241007132555.GA53279@francesco-nb/ Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Cc: stable@vger.kernel.org
Message-ID: <20241121075231.3910922-1-shengjiu.wang@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Fri, 22 Nov 2024 13:42:03 +0000 (14:42 +0100)]
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
When the ida allocation fails we need to free up the previously allocated
memory before returning the error code. Let's fix this and while at it,
let's also move the ida allocation to genpd_alloc_data() and the freeing to
genpd_free_data(), as it better belongs there.
Fei Shao [Tue, 1 Oct 2024 11:27:19 +0000 (19:27 +0800)]
dt-bindings: power: mediatek: Add another nested power-domain layer
The MT8188 SoC has a more in-depth power-domain tree, and the
CHECK_DTBS=y check could fail because the current MediaTek power
dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB
sub-domains.
Add one more nested power-domain layer to pass the check.
Ulf Hansson [Mon, 25 Nov 2024 12:24:46 +0000 (13:24 +0100)]
mmc: core: Further prevent card detect during shutdown
Disabling card detect from the host's ->shutdown_pre() callback turned out
to not be the complete solution. More precisely, beyond the point when the
mmc_bus->shutdown() has been called, to gracefully power off the card, we
need to prevent card detect. Otherwise the mmc_rescan work may poll for the
card with a CMD13, to see if it's still alive, which then will fail and
hang as the card has already been powered off.
To fix this problem, let's disable mmc_rescan prior to power off the card
during shutdown.
Reported-by: Anthony Pighin <anthony.pighin@nokia.com> Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/ Tested-by: Anthony Pighin <anthony.pighin@nokia.com>
Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org>
Hans de Goede [Mon, 18 Nov 2024 21:00:49 +0000 (22:00 +0100)]
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
The Vexia Edu Atla 10 tablet distributed to schools in the Spanish
Andalucía region has no ACPI fwnode associated with the SDHCI controller
for its microsd-slot and thus has no ACPI GPIO resource info.
This causes the following error to be logged and the slot to not work:
[ 10.572113] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
Add a DMI quirk table for providing gpiod_lookup_tables with manually
provided CD GPIO info and use this DMI table to provide the CD GPIO info
on this tablet. This fixes the microsd-slot not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org
Message-ID: <20241118210049.311079-1-hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Geetha sowjanya [Tue, 26 Nov 2024 11:44:31 +0000 (17:14 +0530)]
octeontx2-af: Fix SDP MAC link credits configuration
Current driver allows only packet size < 512B as SDP_LINK_CREDIT
register is set to default value.
This patch fixes this issue by configure the register with
maximum HW supported value to allow packet size > 512B.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since j1939_session_skb_queue() does an extra skb_get() for each new
skb, do the same for the initial one in j1939_session_new() to avoid
refcount underflow.
Reported-by: syzbot+d4e8dc385d9258220c31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d4e8dc385d9258220c31 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20241105094823.2403806-1-dmantipov@yandex.ru
[mkl: clean up commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tiezhu Yang [Mon, 2 Dec 2024 08:42:08 +0000 (16:42 +0800)]
LoongArch: BPF: Adjust the parameter of emit_jirl()
The branch instructions beq, bne, blt, bge, bltu, bgeu and jirl belong
to the format reg2i16, but the sequence of oprand is different for the
instruction jirl. So adjust the parameter order of emit_jirl() to make
it more readable correspond with the Instruction Set Architecture manual.
On LoongArch system, invalid huge pte entry should be invalid_pte_table
or a single _PAGE_HUGE bit rather than a zero value. And it should be
the same with invalid pmd entry, since pmd_none() is called by function
free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single
_PAGE_HUGE bit is also treated as a valid pte table and free_pte_range()
will be called in free_pmd_range().
free_pmd_range()
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
Here invalid_pte_table is used for both invalid huge pte entry and
pmd entry.
David Wang [Mon, 2 Dec 2024 08:42:08 +0000 (16:42 +0800)]
LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values
Performance improvement for reading /proc/interrupts on LoongArch.
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which is less efficient than
seq_put_decimal_ull_width(), stress reading /proc/interrupts indicates
~30% performance improvement with this patch (and its friends).
Signed-off-by: David Wang <00107082@163.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Mon, 2 Dec 2024 08:42:07 +0000 (16:42 +0800)]
LoongArch: Fix reserving screen info memory for above-4G firmware
Since screen_info.lfb_base is a __u32 type, an above-4G address need an
ext_lfb_base to present its higher 32bits. In init_screen_info() we can
use __screen_info_lfb_base() to handle this case for reserving screen
info memory.
Jordy Zomer [Thu, 28 Nov 2024 00:33:25 +0000 (09:33 +0900)]
ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write
An offset from client could be a negative value, It could allows
to write data outside the bounds of the allocated buffer.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+ Reported-by: Jordy Zomer <jordyzomer@google.com> Signed-off-by: Jordy Zomer <jordyzomer@google.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Jordy Zomer [Thu, 28 Nov 2024 00:32:45 +0000 (09:32 +0900)]
ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read
An offset from client could be a negative value, It could lead
to an out-of-bounds read from the stream_buf.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+ Reported-by: Jordy Zomer <jordyzomer@google.com> Signed-off-by: Jordy Zomer <jordyzomer@google.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Brahmajit Das [Tue, 26 Nov 2024 06:11:35 +0000 (11:41 +0530)]
smb: server: Fix building with GCC 15
GCC 15 introduces -Werror=unterminated-string-initialization by default,
this results in the following build error
fs/smb/server/smb_common.c:21:35: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-ini
tialization]
21 | static const char basechars[43] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_-!@#$%";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To this we are replacing char basechars[43] with a character pointer
and then using strlen to get the length.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sun, 1 Dec 2024 23:12:43 +0000 (15:12 -0800)]
Get rid of 'remove_new' relic from platform driver struct
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
projects / thirdparty / linux.git / log
