Andy Shevchenko [Mon, 14 Aug 2023 16:33:43 +0000 (19:33 +0300)]
lib/vsprintf: split out sprintf() and friends
Patch series "lib/vsprintf: Rework header inclusions", v3.
Some patches that reduce the mess with the header inclusions related to
vsprintf.c module. Each patch has its own description, and has no
dependencies to each other, except the collisions over modifications of
the same places. Hence the series.
This patch (of 2):
kernel.h is being used as a dump for all kinds of stuff for a long time.
sprintf() and friends are used in many drivers without need of the full
kernel.h dependency train with it.
Here is the attempt on cleaning it up by splitting out sprintf() and
friends.
Mateusz Guzik [Mon, 14 Aug 2023 17:21:40 +0000 (19:21 +0200)]
kernel/fork: stop playing lockless games for exe_file replacement
xchg originated in 6e399cd144d8 ("prctl: avoid using mmap_sem for exe_file
serialization"). While the commit message does not explain *why* the
change, I found the original submission [1] which ultimately claims it
cleans things up by removing dependency of exe_file on the semaphore.
However, fe69d560b5bd ("kernel/fork: always deny write access to current
MM exe_file") added a semaphore up/down cycle to synchronize the state of
exe_file against fork, defeating the point of the original change.
This is on top of semaphore trips already present both in the replacing
function and prctl (the only consumer).
Normally replacing exe_file does not happen for busy processes, thus
write-locking is not an impediment to performance in the intended use
case. If someone keeps invoking the routine for a busy processes they are
trying to play dirty and that's another reason to avoid any trickery.
As such I think the atomic here only adds complexity for no benefit.
Just write-lock around the replacement.
I also note that replacement races against the mapping check loop as
nothing synchronizes actual assignment with with said checks but I am not
addressing it in this patch. (Is the loop of any use to begin with?)
Link: https://lore.kernel.org/linux-mm/1424979417.10344.14.camel@stgolabs.net/ Link: https://lkml.kernel.org/r/20230814172140.1777161-1-mjguzik@gmail.com Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jim Cromie [Tue, 8 Aug 2023 03:30:18 +0000 (21:30 -0600)]
checkpatch: special case extern struct in .c
"externs should be avoided in .c files" needs an exception for linker
symbols, like those that mark the start, stop of many kernel sections.
Since checkpatch already checks REALNAME to avoid looking at fragments
changing vmlinux.lds.h, add a new else-if block to look at them
instead. As a simple heuristic, treat all words (in the patch-line)
as possible symbols, to screen later warnings.
For my test case, the possible-symbols included BOUNDED_BY (a macro),
which is extra, but not troublesome - these are just to screen
WARNINGS that might be issued on later fragments (changing .c files)
Where the WARN is issued, precede it with an else-if block to catch
one common extern-in-c use case: "extern struct foo bar[]". Here we
can at least issue a softer warning, after checking for a match with a
maybe-linker-symbol parsed earlier from the patch.
Though heuristic, it worked for my test-case, allowing both start__,
stop__ $symbol's (wo the prefixes specifically named). I've coded it
narrowly, it can be expanded later to cover any other expressions.
It does require that the externs in .c's have the additions to
vmlinux.lds.h in the same patch. And requires vmlinux.lds.h before .c
fragments.
x86/kernel: increase kcov coverage under arch/x86/kernel folder
Currently kcov instrument is disabled for object files under
arch/x86/kernel folder.
For object files under arch/x86/kernel, actually just disabling the kcov
instrument of files:"head32.o or head64.o and sev.o" could achieve
successful booting and provide kcov coverage for object files that do not
disable kcov instrument. The additional kcov coverage collected from
arch/x86/kernel folder helps kernel fuzzing efforts to find bugs.
Link to related improvement discussion is below:
https://groups.google.com/g/syzkaller/c/Dsl-RYGCqs8/m/x-tfpTyFBAAJ Related
ticket is as follow: https://bugzilla.kernel.org/show_bug.cgi?id=198443
fs: ocfs2: namei: check return value of ocfs2_add_entry()
Process result of ocfs2_add_entry() in case we have an error
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru> Cc: Joel Becker <jlbec@evilplan.org> Cc: Kurt Hackel <kurt.hackel@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
watchdog/hardlockup: avoid large stack frames in watchdog_hardlockup_check()
After commit 77c12fc95980 ("watchdog/hardlockup: add a "cpu" param to
watchdog_hardlockup_check()") we started storing a `struct cpumask` on the
stack in watchdog_hardlockup_check(). On systems with CONFIG_NR_CPUS set
to 8192 this takes up 1K on the stack. That triggers warnings with
`CONFIG_FRAME_WARN` set to 1024.
We'll use the new trigger_allbutcpu_cpu_backtrace() to avoid needing to
use a CPU mask at all.
Link: https://lkml.kernel.org/r/20230804065935.v4.2.I501ab68cb926ee33a7c87e063d207abf09b9943c@changeid Fixes: 77c12fc95980 ("watchdog/hardlockup: add a "cpu" param to watchdog_hardlockup_check()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202307310955.pLZDhpnl-lkp@intel.com Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a place to allocate a CPU mask just to handle the common case.
Let's extend the API to take a CPU ID to exclude instead of just a
boolean. This isn't any more complex for the API to handle and allows the
hardlockup detector to exclude a different CPU (the one it already did a
trace for) without needing to find space for a CPU mask.
Arguably, this new API also encourages safer behavior. Specifically if
the caller wants to avoid tracing the current CPU (maybe because they
already traced the current CPU) this makes it more obvious to the caller
that they need to make sure that the current CPU ID can't change.
[akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub] Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhu Wang [Thu, 3 Aug 2023 01:51:03 +0000 (09:51 +0800)]
efs: clean up -Wunused-const-variable= warning
When building with W=1, the following warning occurs.
In file included from fs/efs/super.c:18:0:
fs/efs/efs.h:22:19: warning: `cprt' defined but not used [-Wunused-const-variable=]
static const char cprt[] = "EFS: "EFS_VERSION" - (c) 1999 Al Smith
<Al.Smith@aeschi.ch.eu.org>";
^~~~
The 'cprt' is not used in any files, we move the copyright statement
into the comment.
Chengfeng Ye [Wed, 2 Aug 2023 13:14:36 +0000 (13:14 +0000)]
ocfs2: cluster: fix potential deadlock on &o2net_debug_lock
&o2net_debug_lock is acquired by timer o2net_idle_timer() along the
following call chain. Thus the acquisition of the lock under process
context should disable bottom half, otherwise deadlock could happen if the
timer happens to preempt the execution while the lock is held in process
context on the same CPU.
Several lock acquisition of &o2net_debug_lock under process context do not
disable irq or bottom half. The patch fixes these potential deadlocks
scenerio by using spin_lock_bh() on &o2net_debug_lock.
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock. x86_64 allmodconfig using gcc shows
no new warning.
Link: https://lkml.kernel.org/r/20230802131436.17765-1-dg573847474@gmail.com Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chengfeng Ye [Wed, 2 Aug 2023 12:38:24 +0000 (12:38 +0000)]
ocfs2: cluster: fix potential deadlock on &qs->qs_lock
&qs->qs_lock is acquired by timer o2net_idle_timer() along the following
call chain. Thus the acquisition of the lock under process context should
disable bottom half, otherwise deadlock could happen if the timer happens
to preempt the execution while the lock is held in process context on the
same CPU.
Several lock acquisition of &qs->qs_lock under process contex do not
disable irq or bottom half. The patch fixes these potential deadlocks
scenerio by using spin_lock_bh() on &qs->qs_lock.
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock. x86_64 allmodconfig using gcc shows
no new warning.
Link: https://lkml.kernel.org/r/20230802123824.15301-1-dg573847474@gmail.com Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Ying Lee [Mon, 10 Jul 2023 09:28:46 +0000 (17:28 +0800)]
scripts/gdb: fix 'lx-lsmod' show the wrong size
'lsmod' shows total core layout size, so we need to sum up all the
sections in core layout in gdb scripts.
/ # lsmod
kasan_test 200704 0 - Live 0xffff80007f640000
Before patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 36864 0
After patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 200704 0
Link: https://lkml.kernel.org/r/20230710092852.31049-1-Kuan-Ying.Lee@mediatek.com Fixes: b4aff7513df3 ("scripts/gdb: use mem instead of core_layout to get the module address") Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Koudai Iwahori [Tue, 1 Aug 2023 12:10:52 +0000 (05:10 -0700)]
scripts/gdb: fix lx-symbols command for arm64 LLVM
lx-symbols assumes that module's .text sections is located at
`module->mem[MOD_TEXT].base` and passes it to add-symbol-file command.
However, .text section follows after .plt section in modules built by LLVM
toolchain for arm64 target. Symbol addresses are skewed in GDB.
Fix this issue by using the address of .text section stored in
`module->sect_attrs`.
gcov: shut up missing prototype warnings for internal stubs
gcov uses global functions that are called from generated code, but these
have no prototype in a header, which causes a W=1 build warning:
kernel/gcov/gcc_base.c:12:6: error: no previous prototype for '__gcov_init' [-Werror=missing-prototypes]
kernel/gcov/gcc_base.c:40:6: error: no previous prototype for '__gcov_flush' [-Werror=missing-prototypes]
kernel/gcov/gcc_base.c:46:6: error: no previous prototype for '__gcov_merge_add' [-Werror=missing-prototypes]
kernel/gcov/gcc_base.c:52:6: error: no previous prototype for '__gcov_merge_single' [-Werror=missing-prototypes]
Just turn off these warnings unconditionally for the two files that
contain them.
ocfs2: use regular seq_show_option for osb_cluster_stack
While cleaning up seq_show_option_n()'s use of strncpy, it was noticed
that the osb_cluster_stack member is always NUL-terminated, so there is no
need to use the special seq_show_option_n() routine. Replace it with the
standard seq_show_option() routine.
Link: https://lkml.kernel.org/r/20230726215919.never.127-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.
This is less verbose.
Link: https://lkml.kernel.org/r/9d99ea2090739f816d0dc0c4ebaa42b26fc48a9e.1689533270.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: use flexible array in 'struct ocfs2_recovery_map'
Turn 'rm_entries' in 'struct ocfs2_recovery_map' into a flexible array.
The advantages are:
- save the size of a pointer when the new undo structure is allocated
- avoid some always ugly pointer arithmetic to get the address of
'rm_entries'
- avoid an indirection when the array is accessed
While at it, use struct_size() to compute the size of the new undo
structure.
Link: https://lkml.kernel.org/r/c645911ffd2720fce5e344c17de642518cd0db52.1689533270.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Tue, 18 Jul 2023 21:11:44 +0000 (00:11 +0300)]
kernel.h: split out COUNT_ARGS() and CONCATENATE() to args.h
Patch series "kernel.h: Split out a couple of macros to args.h", v4.
There are macros in kernel.h that can be used outside of that header.
Split them to args.h and replace open coded variants.
This patch (of 4):
kernel.h is being used as a dump for all kinds of stuff for a long time.
The COUNT_ARGS() and CONCATENATE() macros may be used in some places
without need of the full kernel.h dependency train with it.
Here is the attempt on cleaning it up by splitting out these macros().
While at it, include new header where it's being used.
Link: https://lkml.kernel.org/r/20230718211147.18647-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20230718211147.18647-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [PCI] Cc: Brendan Higgins <brendan.higgins@linux.dev> Cc: Daniel Latypov <dlatypov@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gow <davidgow@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jakob Koschel [Tue, 18 Jul 2023 22:29:12 +0000 (00:29 +0200)]
arch: enable HAS_LTO_CLANG with KASAN and KCOV
Both KASAN and KCOV had issues with LTO_CLANG if DEBUG_INFO is enabled.
With LTO inlinable function calls are required to have debug info if they
are inlined into a function that has debug info.
Starting with LLVM 17 this will be fixed ([1],[2]) and enabling LTO with
KASAN/KCOV and DEBUG_INFO doesn't cause linker errors anymore.
Colin Ian King [Wed, 19 Jul 2023 12:17:35 +0000 (13:17 +0100)]
fs: hfsplus: make extend error rate limited
Extending a file where there is not enough free space can trigger frequent
extend alloc file error messages and this can easily spam the kernel log.
Make the error message rate limited.
Wang Ming [Thu, 13 Jul 2023 08:24:43 +0000 (16:24 +0800)]
lib: remove error checking for debugfs_create_dir()
It is expected that most callers should _ignore_ the errors return by
debugfs_create_dir() in err_inject_init().
Link: https://lkml.kernel.org/r/20230713082455.2415-1-machel@vivo.com Signed-off-by: Wang Ming <machel@vivo.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric DeVolder [Wed, 2 Aug 2023 16:17:50 +0000 (12:17 -0400)]
remove ARCH_DEFAULT_KEXEC from Kconfig.kexec
This patch is a minor cleanup to the series "refactor Kconfig to
consolidate KEXEC and CRASH options".
In that series, a new option ARCH_DEFAULT_KEXEC was introduced in order to
obtain the equivalent behavior of s390 original Kconfig settings for
KEXEC. As it turns out, this new option did not fully provide the
equivalent behavior, rather a "select KEXEC" did.
As such, the ARCH_DEFAULT_KEXEC is not needed anymore, so remove it.
Eric DeVolder [Wed, 12 Jul 2023 16:15:45 +0000 (12:15 -0400)]
kexec: rename ARCH_HAS_KEXEC_PURGATORY
The Kconfig refactor to consolidate KEXEC and CRASH options utilized
option names of the form ARCH_SUPPORTS_<option>. Thus rename the
ARCH_HAS_KEXEC_PURGATORY to ARCH_SUPPORTS_KEXEC_PURGATORY to follow
the same.
Eric DeVolder [Wed, 12 Jul 2023 16:15:44 +0000 (12:15 -0400)]
sh/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:43 +0000 (12:15 -0400)]
s390/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:42 +0000 (12:15 -0400)]
riscv/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:41 +0000 (12:15 -0400)]
powerpc/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:40 +0000 (12:15 -0400)]
parisc/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:39 +0000 (12:15 -0400)]
mips/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:38 +0000 (12:15 -0400)]
m68k/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Link: https://lkml.kernel.org/r/20230712161545.87870-8-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric DeVolder [Wed, 12 Jul 2023 16:15:37 +0000 (12:15 -0400)]
loongarch/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:36 +0000 (12:15 -0400)]
arm64/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:35 +0000 (12:15 -0400)]
ia64/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:34 +0000 (12:15 -0400)]
arm/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
Eric DeVolder [Wed, 12 Jul 2023 16:15:33 +0000 (12:15 -0400)]
x86/kexec: refactor for kernel/Kconfig.kexec
The kexec and crash kernel options are provided in the common
kernel/Kconfig.kexec. Utilize the common options and provide
the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
equivalent set of KEXEC and CRASH options.
the new kernel feature introduces the config option CRASH_HOTPLUG.
In reviewing, Thomas Gleixner requested that the new config option
not be placed in x86 Kconfig. Rather the option needs a generic/common
home. To Thomas' point, the KEXEC and CRASH options have largely been
duplicated in the various arch/<arch>/Kconfig files, with minor
differences. This kind of proliferation is to be avoid/stopped.
https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/
To that end, I have refactored the arch Kconfigs so as to consolidate
the various KEXEC and CRASH options. Generally speaking, this work has
the following themes:
- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
- These items from arch/Kconfig:
CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
- These items from arch/x86/Kconfig form the common options:
KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE
KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
- These items from arch/arm64/Kconfig form the common options:
KEXEC_IMAGE_VERIFY_SIG
- The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
and is now listed in "General Setup" submenu from init/Kconfig.
- To control the common options, each has a new ARCH_SUPPORTS_<option>
option. These gateway options determine whether the common options
options are valid for the architecture.
- To account for the slight differences in the original architecture
coding of the common options, each now has a corresponding
ARCH_SELECTS_<option> which are used to elicit the same side effects
as the original arch/<arch>/Kconfig files for KEXEC and CRASH options.
An example, 'make menuconfig' illustrating the submenu:
> General setup > Kexec and crash features
[*] Enable kexec system call
[*] Enable kexec file based system call
[*] Verify kernel signature during kexec_file_load() syscall
[ ] Require a valid signature in kexec_file_load() syscall
[ ] Enable bzImage signature verification support
[*] kexec jump
[*] kernel crash dumps
[*] Update the crash elfcorehdr on system configuration changes
In the process of consolidating the common options, I encountered
slight differences in the coding of these options in several of the
architectures. As a result, I settled on the following solution:
- Each of the common options has a 'depends on ARCH_SUPPORTS_<option>'
statement. For example, the KEXEC_FILE option has a 'depends on
ARCH_SUPPORTS_KEXEC_FILE' statement.
This approach is needed on all common options so as to prevent
options from appearing for architectures which previously did
not allow/enable them. For example, arm supports KEXEC but not
KEXEC_FILE. The arch/arm/Kconfig does not provide
ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options
are not available to arm.
- The boolean ARCH_SUPPORTS_<option> in effect allows the arch to
determine when the feature is allowed. Archs which don't have the
feature simply do not provide the corresponding ARCH_SUPPORTS_<option>.
For each arch, where there previously were KEXEC and/or CRASH
options, these have been replaced with the corresponding boolean
ARCH_SUPPORTS_<option>, and an appropriate def_bool statement.
For example, if the arch supports KEXEC_FILE, then the
ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits
the KEXEC_FILE option to be available.
If the arch has a 'depends on' statement in its original coding
of the option, then that expression becomes part of the def_bool
expression. For example, arm64 had:
config KEXEC
depends on PM_SLEEP_SMP
and in this solution, this converts to:
config ARCH_SUPPORTS_KEXEC
def_bool PM_SLEEP_SMP
- In order to account for the architecture differences in the
coding for the common options, the ARCH_SELECTS_<option> in the
arch/<arch>/Kconfig is used. This option has a 'depends on
<option>' statement to couple it to the main option, and from
there can insert the differences from the common option and the
arch original coding of that option.
For example, a few archs enable CRYPTO and CRYTPO_SHA256 for
KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and
'select CRYPTO' and 'select CRYPTO_SHA256' statements.
Illustrating the option relationships:
For each of the common KEXEC and CRASH options:
ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option>
<option> # in Kconfig.kexec
ARCH_SUPPORTS_<option> # in arch/<arch>/Kconfig, as needed
ARCH_SELECTS_<option> # in arch/<arch>/Kconfig, as needed
For example, KEXEC:
ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC
KEXEC # in Kconfig.kexec
ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed
ARCH_SELECTS_KEXEC # in arch/<arch>/Kconfig, as needed
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).
Examples:
A few examples to show the new strategy in action:
===== x86 (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
===== powerpc (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
depends on PPC64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_SELECTS_CRASH_DUMP
def_bool y
depends on CRASH_DUMP
select RELOCATABLE if PPC64 || 44x || PPC_85xx
Testing Approach and Results
There are 388 config files in the arch/<arch>/configs directories.
For each of these config files, a .config is generated both before and
after this Kconfig series, and checked for equivalence. This approach
allows for a rather rapid check of all architectures and a wide
variety of configs wrt/ KEXEC and CRASH, and avoids requiring
compiling for all architectures and running kernels and run-time
testing.
For each config file, the olddefconfig, allnoconfig and allyesconfig
targets are utilized. In testing the randconfig has revealed problems
as well, but is not used in the before and after equivalence check
since one can not generate the "same" .config for before and after,
even if using the same KCONFIG_SEED since the option list is
different.
As such, the following script steps compare the before and after
of 'make olddefconfig'. The new symbols introduced by this series
are filtered out, but otherwise the config files are PASS only if
they were equivalent, and FAIL otherwise.
The script performs the test by doing the following:
# Obtain the "golden" .config output for given config file
# Reset test sandbox
git checkout master
git branch -D test_Kconfig
git checkout -B test_Kconfig master
make distclean
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, LHSB is "golden"
scoreboard .config
# Obtain the "changed" .config output for given config file
# Reset test sandbox
make distclean
# Apply this Kconfig series
git am <this Kconfig series>
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, RHSB is "changed"
scoreboard .config
# Determine test result
# Filter-out new symbols introduced by this series
# Filter-out symbol=n which not in either scoreboard
# Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL
The script was instrumental during the refactoring of Kconfig as it
continually revealed problems. The end result being that the solution
presented in this series passes all configs as checked by the script,
with the following exceptions:
- arch/ia64/configs/zx1_config with olddefconfig
This config file has:
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
and this refactor now couples KEXEC to CRASH_DUMP, so it is not
possible to enable CRASH_DUMP without KEXEC.
- arch/sh/configs/* with allyesconfig
The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU
(which clearly is not meant to be set). This symbol is not provided
but with the allyesconfig it is set to yes which enables CRASH_DUMP.
But KEXEC is coded as dependent upon MMU, and is set to no in
arch/sh/mm/Kconfig, so KEXEC is not enabled.
This refactor now couples KEXEC to CRASH_DUMP, so it is not
possible to enable CRASH_DUMP without KEXEC.
While the above exceptions are not equivalent to their original,
the config file produced is valid (and in fact better wrt/ CRASH_DUMP
handling).
This patch (of 14)
The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.
Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.
Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.
To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).
Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Cc. "H. Peter Anvin" <hpa@zytor.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86 Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Juerg Haefliger <juerg.haefliger@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marc Aurèle La France <tsi@tuyoix.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Xin Li <xin3.li@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baoquan He [Fri, 7 Jul 2023 13:58:50 +0000 (21:58 +0800)]
irqchip/al-fic: make AL_FIC depend on HAS_IOMEM
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common than
PCI devices. Hence it could have a fully functional s390 kernel with
CONFIG_PCI=n, then the relevant iomem mapping functions [including
ioremap(), devm_ioremap(), etc.] are not available.
Here let AL_FIC depend on HAS_IOMEM so that it won't be built
to cause below compiling error if PCI is unset:
------
ld: drivers/irqchip/irq-al-fic.o: in function `al_fic_init_dt':
irq-al-fic.c:(.init.text+0x76): undefined reference to `of_iomap'
ld: irq-al-fic.c:(.init.text+0x4ce): undefined reference to `iounmap'
------
Link: https://lkml.kernel.org/r/20230707135852.24292-7-bhe@redhat.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baoquan He [Fri, 7 Jul 2023 13:58:49 +0000 (21:58 +0800)]
net: altera-tse: make ALTERA_TSE depend on HAS_IOMEM
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common than
PCI devices. Hence it could have a fully functional s390 kernel with
CONFIG_PCI=n, then the relevant iomem mapping functions [including
ioremap(), devm_ioremap(), etc.] are not available.
Here let ALTERA_TSE depend on HAS_IOMEM so that it won't be built to cause
below compiling error if PCI is unset:
Turn 'semadj' in 'struct sem_undo' into a flexible array.
The advantages are:
- save the size of a pointer when the new undo structure is allocated
- avoid some always ugly pointer arithmetic to get the address of semadj
- avoid an indirection when the array is accessed
While at it, use struct_size() to compute the size of the new undo
structure.
acct: replace all non-returning strlcpy with strscpy
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
Make the print-fatal-signals message more useful by printing the comm
and the exe name for the process which received the fatal signal:
Before:
potentially unexpected fatal signal 4
potentially unexpected fatal signal 11
After:
buggy-program: pool: potentially unexpected fatal signal 4
some-daemon: gdbus: potentially unexpected fatal signal 11
comm used to be present but was removed in commit 681a90ffe829b8ee25d
("arc, print-fatal-signals: reduce duplicated information") because it's
also included as part of the later stack trace. Having the comm as part
of the main "unexpected fatal..." print is rather useful though when
analysing logs, and the exe name is also valuable as shown in the
examples above where the comm ends up having some generic name like
"pool".
[akpm@linux-foundation.org: don't include linux/file.h twice] Link: https://lkml.kernel.org/r/20230707-fatal-comm-v1-1-400363905d5e@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Thomas Huth [Wed, 26 Apr 2023 06:50:32 +0000 (08:50 +0200)]
arch/ia64/include: remove CONFIG_IA64_DEBUG_CMPXCHG from uapi header
CONFIG_* switches should not be exposed in uapi headers. The macros that
are defined here are also only useful for the kernel code, so let's move
them to asm/cmpxchg.h instead.
The only two files that are using these macros are the headers
arch/ia64/include/asm/bitops.h and arch/ia64/include/asm/atomic.h and
these include asm/cmpxchg.h via asm/intrinsics.h, so this movement should
not cause any trouble.
Sumitra Sharma [Sat, 10 Jun 2023 17:57:12 +0000 (10:57 -0700)]
lib: replace kmap() with kmap_local_page()
kmap() has been deprecated in favor of the kmap_local_page() due to high
cost, restricted mapping space, the overhead of a global lock for
synchronization, and making the process sleep in the absence of free
slots.
kmap_local_page() is faster than kmap() and offers thread-local and
CPU-local mappings, take pagefaults in a local kmap region and preserves
preemption by saving the mappings of outgoing tasks and restoring those of
the incoming one during a context switch.
The mappings are kept thread local in the functions “dmirror_do_read”
and “dmirror_do_write” in test_hmm.c
Therefore, replace kmap() with kmap_local_page() and use
mempcy_from/to_page() to avoid open coding kmap_local_page() + memcpy() +
kunmap_local().
Remove the unused variable “tmp”.
Link: https://lkml.kernel.org/r/20230610175712.GA348514@sumitra.com Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Deepak R Varma <drv@mailo.com> Cc: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test"
* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr
Merge tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue"
* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Fix incorrect VCN33 sync error message
regulator: mt6358: Sync VCN33_* enable status after checking ID
Merge tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems"
* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: misc: ehset: fix wrong if condition
usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
usb: gadget: call usb_gadget_check_config() to verify UDC capability
usb: typec: Use sysfs_emit_at when concatenating the string
usb: typec: Iterate pds array when showing the pd list
usb: typec: Set port->pd before adding device for typec_port
usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
Revert "usb: xhci: tegra: Fix error check"
USB: gadget: Fix the memory leak in raw_gadget driver
usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
USB: quirks: add quirk for Focusrite Scarlett
usb: xhci-mtk: set the dma max_seg_size
MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
usb: dwc3: don't reset device side if dwc3 was configured as host-only
usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
usb: ohci-at91: Fix the unhandle interrupt when resume
...
Merge tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
Merge tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
some reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems"
* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
staging: r8712: Fix memory leak in _r8712_init_xmit_priv()
Merge tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert
for the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers"
* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/genalloc: Name subpools by of_node_full_name()
Documentation: embargoed-hardware-issues.rst: add AMD to the list
Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
Documentation: security-bugs.rst: clarify CVE handling
Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group
Merge tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
Merge tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
Merge tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
Merge tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
Merge tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:
- two reconnect fixes (to address the case where non-default
iocharset gets incorrectly overridden at reconnect with the
default charset)
- fix for NTLMSSP_AUTH request setting a flag incorrectly)
- Add missing check for invalid tlink (tree connection) in ioctl"
* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing return value check for cifs_sb_tlink
smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
cifs: fix charset issue in reconnection
fs/nls: make load_nls() take a const parameter
Merge tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.
If a resize shrinks the buffer it clears the read count to notify
readers that they need to reset. But the read count is also used for
accounting and this causes the numbers to be off. Instead, create a
separate variable to use to notify readers to reset.
- Fix the ref counts of the "soft disable" mode. The wrong value was
used for testing if soft disable mode should be enabled or disable,
but instead, just change the logic to do the enable and disable in
place when the SOFT_MODE is set or cleared.
- Several kernel-doc fixes
- Removal of unused external declarations
* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warning in trace_buffered_event_disable()
ftrace: Remove unused extern declarations
tracing: Fix kernel-doc warnings in trace_seq.c
tracing: Fix kernel-doc warnings in trace_events_trigger.c
tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
ring-buffer: Fix kernel-doc warnings in ring_buffer.c
ring-buffer: Fix wrong stat of cpu_buffer->read
Sven Joachim [Thu, 27 Jul 2023 20:00:41 +0000 (22:00 +0200)]
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes for build system, builtin cmdline handling, bpf and
{copy, clear}_user, together with a trivial cleanup"
* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
LoongArch: BPF: Fix check condition to call lu32id in move_imm()
LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
LoongArch: Fix return value underflow in exception path
LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
LoongArch: Fix module relocation error with binutils 2.41
LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
Stuff CR0 and/or CR4 to be compliant with a restricted guest if and only
if KVM itself is not configured to utilize unrestricted guests, i.e. don't
stuff CR0/CR4 for a restricted L2 that is running as the guest of an
unrestricted L1. Any attempt to VM-Enter a restricted guest with invalid
CR0/CR4 values should fail, i.e. in a nested scenario, KVM (as L0) should
never observe a restricted L2 with incompatible CR0/CR4, since nested
VM-Enter from L1 should have failed.
And if KVM does observe an active, restricted L2 with incompatible state,
e.g. due to a KVM bug, fudging CR0/CR4 instead of letting VM-Enter fail
does more harm than good, as KVM will often neglect to undo the side
effects, e.g. won't clear rmode.vm86_active on nested VM-Exit, and thus
the damage can easily spill over to L1. On the other hand, letting
VM-Enter fail due to bad guest state is more likely to contain the damage
to L2 as KVM relies on hardware to perform most guest state consistency
checks, i.e. KVM needs to be able to reflect a failed nested VM-Enter into
L1 irrespective of (un)restricted guest behavior.
Cc: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Fixes: bddd82d19e2e ("KVM: nVMX: KVM needs to unset "unrestricted guest" VM-execution control in vmcs02 if vmcs12 doesn't set it") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000f316b705fdf6e2b4@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
Remove coccinelle's recommendation to use DEFINE_DEBUGFS_ATTRIBUTE()
instead of DEFINE_SIMPLE_ATTRIBUTE(). Regardless of whether or not the
"significant overhead" incurred by debugfs_create_file() is actually
meaningful, warnings from the script have led to a rash of low-quality
patches that have sowed confusion and consumed maintainer time for little
to no benefit. There have been no less than four attempts to "fix" KVM,
and a quick search on lore shows that KVM is not alone.
KVM: selftests: Verify stats fd is usable after VM fd has been closed
Verify that VM and vCPU binary stats files are usable even after userspace
has put its last direct reference to the VM. This is a regression test
for a UAF bug where KVM didn't gift the stats files a reference to the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Verify stats fd can be dup()'d and read
Expand the binary stats test to verify that a stats fd can be dup()'d
and read, to (very) roughly simulate userspace passing around the file.
Adding the dup() test is primarily an intermediate step towards verifying
that userspace can read VM/vCPU stats before _and_ after userspace closes
its copy of the VM fd; the dup() test itself is only mildly interesting.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Verify userspace can create "redundant" binary stats files
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single
file per VM/vCPU. There's no known use case for getting multiple stats
fds, but it should work, and more importantly creating multiple files will
make it easier to test that KVM correct manages VM refcounts for stats
files.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Explicitly free vcpus array in binary stats test
Explicitly free the all-encompassing vcpus array in the binary stats test
so that the test is consistent with respect to freeing all dynamically
allocated resources (versus letting them be freed on exit).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Clean up stats fd in common stats_test() helper
Move the stats fd cleanup code into stats_test() and drop the
superfluous vm_stats_test() and vcpu_stats_test() helpers in order to
decouple creation of the stats file from consuming/testing the file
(deduping code is a bonus). This will make it easier to test various
edge cases related to stats, e.g. that userspace can dup() a stats fd,
that userspace can have multiple stats files for a singleVM/vCPU, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Use pread() to read binary stats header
Use pread() with an explicit offset when reading the header and the header
name for a binary stats fd so that the common helper and the binary stats
test don't subtly rely on the file effectively being untouched, e.g. to
allow multiple reads of the header, name, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes: ce55c049459c ("KVM: stats: Support binary stats retrieval for a VCPU") Fixes: fcfe1baeddbf ("KVM: stats: Support binary stats retrieval for a VM") Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu> Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35") Cc: Aaron Lewis <aaronlewis@google.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows
dereferencing memslots during WRMSR emulation, drop the requirement that
"next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a
better fix than avoiding the pastpath, but at the time it was thought that
accessing SRCU-protected data in the fastpath was a one-off edge case.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Temporarily acquire kvm->srcu for read when potentially emulating WRMSR in
the VM-Exit fastpath handler, as several of the common helpers used during
emulation expect the caller to provide SRCU protection. E.g. if the guest
is counting instructions retired, KVM will query the PMU event filter when
stepping over the WRMSR.
Alternatively, check_pmu_event_filter() could acquire kvm->srcu, but this
isn't the first bug of this nature, e.g. see commit 5c30e8101e8d ("KVM:
SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"). Providing
protection for the entirety of WRMSR emulation will allow reverting the
aforementioned commit, and will avoid having to play whack-a-mole when new
uses of SRCU-protected structures are inevitably added in common emulation
helpers.
Fixes: dfdeda67ea2d ("KVM: x86/pmu: Prevent the PMU from counting disallowed events") Reported-by: Greg Thelen <gthelen@google.com> Reported-by: Aaron Lewis <aaronlewis@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721224337.2335137-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
Use vmread_error() to report VM-Fail on VMREAD for the "asm goto" case,
now that trampoline case has yet another wrapper around vmread_error() to
play nice with instrumentation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721235637.2345403-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Make VMREAD error path play nice with noinstr
Mark vmread_error_trampoline() as noinstr, and add a second trampoline
for the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=n case to enable instrumentation
when handling VM-Fail on VMREAD. VMREAD is used in various noinstr
flows, e.g. immediately after VM-Exit, and objtool rightly complains that
the call to the error trampoline leaves a no-instrumentation section
without annotating that it's safe to do so.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0xc9:
call to vmread_error_trampoline() leaves .noinstr.text section
Note, strictly speaking, enabling instrumentation in the VM-Fail path
isn't exactly safe, but if VMREAD fails the kernel/system is likely hosed
anyways, and logging that there is a fatal error is more important than
*maybe* encountering slightly unsafe instrumentation.
Reported-by: Su Hui <suhui@nfschina.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721235637.2345403-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Mon, 24 Jul 2023 11:12:36 +0000 (19:12 +0800)]
KVM: x86/irq: Conditionally register IRQ bypass consumer again
As was attempted commit 14717e203186 ("kvm: Conditionally register IRQ
bypass consumer"): "if we don't support a mechanism for bypassing IRQs,
don't register as a consumer. Initially this applied to AMD processors,
but when AVIC support was implemented for assigned devices,
kvm_arch_has_irq_bypass() was always returning true.
We can still skip registering the consumer where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
This eliminates meaningless dev_info()s when the connect fails
between producer and consumer", such as on Linux hosts where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
Cc: Alex Williamson <alex.williamson@redhat.com> Reported-by: Yong He <alexyonghe@tencent.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217379 Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20230724111236.76570-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: check the kvm_cpu_get_interrupt result before using it
The code was blindly assuming that kvm_cpu_get_interrupt never returns -1
when there is a pending interrupt.
While this should be true, a bug in KVM can still cause this.
If -1 is returned, the code before this patch was converting it to 0xFF,
and 0xFF interrupt was injected to the guest, which results in an issue
which was hard to debug.
Add WARN_ON_ONCE to catch this case and skip the injection
if this happens again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230726135945.260841-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / thirdparty / kernel / linux.git / log
