Alexander Graf [Sat, 21 Sep 2024 08:57:12 +0000 (08:57 +0000)]
target/i386: Walk NPT in guest real mode
When translating virtual to physical address with a guest CPU that
supports nested paging (NPT), we need to perform every page table walk
access indirectly through the NPT, which we correctly do.
However, we treat real mode (no page table walk) special: In that case,
we currently just skip any walks and translate VA -> PA. With NPT
enabled, we also need to then perform NPT walk to do GVA -> GPA -> HPA
which we fail to do so far.
The net result of that is that TCG VMs with NPT enabled that execute
real mode code (like SeaBIOS) end up with GPA==HPA mappings which means
the guest accesses host code and data. This typically shows as failure
to boot guests.
This patch changes the page walk logic for NPT enabled guests so that we
always perform a GVA -> GPA translation and then skip any logic that
requires an actual PTE.
That way, all remaining logic to walk the NPT stays and we successfully
walk the NPT in real mode.
Cc: qemu-stable@nongnu.org Fixes: fe441054bb3f0 ("target-i386: Add NPT support") Signed-off-by: Alexander Graf <graf@amazon.com> Reported-by: Eduard Vlad <evlad@amazon.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240921085712.28902-1-graf@amazon.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit b56617bbcb473c25815d1bf475e326f84563b1de) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 29 Aug 2024 18:55:27 +0000 (20:55 +0200)]
raw-format: Fix error message for invalid offset/size
s->offset and s->size are only set at the end of the function and still
contain the old values when formatting the error message. Print the
parameters with the new values that we actually checked instead.
Fixes: 500e2434207d ('raw-format: Split raw_read_options()') Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240829185527.47152-1-kwolf@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 04bbc3ee52b32ac465547bb40c1f090a1b8f315a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 8 Oct 2024 16:47:07 +0000 (17:47 +0100)]
tests/qemu-iotests/211.out: Update to expect MapEntry 'compressed' field
In commit 52b10c9c0c68e90f in 2023 the QAPI MapEntry struct was
updated to add a 'compressed' field. That commit updated a number
of iotest expected-output files, but missed 211, which is vdi
specific. The result is that
./check -vdi
and more specifically
./check -vdi 211
fails because the expected and actual output don't match.
Update the reference output.
Cc: qemu-stable@nongnu.org Fixes: 52b10c9c0c68e90f ("qemu-img: map: report compressed data blocks") Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241008164708.2966400-4-peter.maydell@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d60bd080e783107cb876a6f16561fe03f9dcbca7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Changing the order here caused a regression with the "tuxrun"
kernels (from https://storage.tuxboot.com/20230331/) - ATA commands
fail with a "ata1: lost interrupt (Status 0x58)" message.
Apparently we need to wire the interrupt here first before
realizing the device, so revert the change to the original
behavior.
Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-17-thuth@redhat.com>
(cherry picked from commit 68ad89b75ad2bb5f38abea815a50ec17a142565a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Berger [Wed, 16 Oct 2024 15:21:59 +0000 (11:21 -0400)]
tests: Wait for migration completion on destination QEMU to avoid failures
Rather than waiting for the completion of migration on the source side,
wait for it on the destination QEMU side to avoid accessing the TPM TIS
memory mapped registers before QEMU could restore their state. This
error condition could be triggered on busy systems where the destination
QEMU did not have enough time to restore the TIS state while the test case
was already reading its registers. The test case was for example reading
the STS register and received an unexpected value (0xffffffff), which
lead to a segmentation fault later on due to trying to read 0xffff bytes
from the TIS into a buffer.
Cc: <qemu-stable@nongnu.org> Reported-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
(cherry picked from commit d9280ea3174700170d39c4cdd3f587f260757711) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tom Dohrmann [Tue, 3 Sep 2024 06:29:53 +0000 (06:29 +0000)]
accel/kvm: check for KVM_CAP_READONLY_MEM on VM
KVM_CAP_READONLY_MEM used to be a global capability, but with the
introduction of AMD SEV-SNP confidential VMs, this extension is not
always available on all VM types [1,2].
Query the extension on the VM level instead of on the KVM level.
Paolo Bonzini [Tue, 18 Jun 2024 06:53:19 +0000 (08:53 +0200)]
target/i386/tcg: Use DPL-level accesses for interrupts and call gates
Stack accesses should be explicit and use the privilege level of the
target stack. This ensures that SMAP is not applied when the target
stack is in ring 3.
This fixes a bug wherein i386/tcg assumed that an interrupt return, or a
far call using the CALL or JMP instruction, was always going from kernel
or user mode to kernel mode when using a call gate. This assumption is
violated if the call gate has a DPL that is greater than 0.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/249 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e136648c5c95ee4ea233cccf999c07e065bef26d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Xu [Tue, 17 Sep 2024 16:38:32 +0000 (12:38 -0400)]
KVM: Dynamic sized kvm memslots array
Zhiyi reported an infinite loop issue in VFIO use case. The cause of that
was a separate discussion, however during that I found a regression of
dirty sync slowness when profiling.
Each KVMMemoryListerner maintains an array of kvm memslots. Currently it's
statically allocated to be the max supported by the kernel. However after
Linux commit 4fc096a99e ("KVM: Raise the maximum number of user memslots"),
the max supported memslots reported now grows to some number large enough
so that it may not be wise to always statically allocate with the max
reported.
What's worse, QEMU kvm code still walks all the allocated memslots entries
to do any form of lookups. It can drastically slow down all memslot
operations because each of such loop can run over 32K times on the new
kernels.
Fix this issue by making the memslots to be allocated dynamically.
Here the initial size was set to 16 because it should cover the basic VM
usages, so that the hope is the majority VM use case may not even need to
grow at all (e.g. if one starts a VM with ./qemu-system-x86_64 by default
it'll consume 9 memslots), however not too large to waste memory.
There can also be even better way to address this, but so far this is the
simplest and should be already better even than before we grow the max
supported memslots. For example, in the case of above issue when VFIO was
attached on a 32GB system, there are only ~10 memslots used. So it could
be good enough as of now.
In the above VFIO context, measurement shows that the precopy dirty sync
shrinked from ~86ms to ~3ms after this patch applied. It should also apply
to any KVM enabled VM even without VFIO.
NOTE: we don't have a FIXES tag for this patch because there's no real
commit that regressed this in QEMU. Such behavior existed for a long time,
but only start to be a problem when the kernel reports very large
nr_slots_max value. However that's pretty common now (the kernel change
was merged in 2021) so we attached cc:stable because we'll want this change
to be backported to stable branches.
Cc: qemu-stable <qemu-stable@nongnu.org> Reported-by: Zhiyi Guo <zhguo@redhat.com> Tested-by: Zhiyi Guo <zhguo@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240917163835.194664-2-peterx@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5504a8126115d173687b37e657312a8ffe29fc0c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Thu, 17 Oct 2024 09:09:52 +0000 (11:09 +0200)]
tcg/s390x: fix constraint for 32-bit TSTEQ/TSTNE
32-bit TSTEQ and TSTNE is subject to the same constraints as
for 64-bit, but setcond_i32 and negsetcond_i32 were incorrectly
using TCG_CT_CONST ("i") instead of TCG_CT_CONST_CMP ("C").
Adjust the constraint and make tcg_target_const_match use the
same sequence as tgen_cmp2: first check if the constant is a
valid operand for TSTEQ/TSTNE, then accept everything for 32-bit
non-test comparisons, finally check if the constant is a valid
operand for 64-bit non-test comparisons.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 615586cb356811e46c2e5f85c36db4b93f8381cd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ui/win32: fix potential use-after-free with dbus shared memory
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
(cherry picked from commit 330ef31deb2e5461cff907488b710f5bd9cd2327) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-3-marcandre.lureau@redhat.com>
(cherry picked from commit 6d6e23361fc732e4fe36a8bc5873b85f264ed53a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 14 Oct 2024 16:05:53 +0000 (17:05 +0100)]
hw/char/pl011: Use correct masks for IBRD and FBRD
In commit b88cfee90268cad we defined masks for the IBRD and FBRD
integer and fractional baud rate divider registers, to prevent the
guest from writing invalid values which could cause division-by-zero.
Unfortunately we got the mask values the wrong way around: the FBRD
register is six bits and the IBRD register is 16 bits, not
vice-versa.
You would only run into this bug if you programmed the UART to a baud
rate of less than 9600, because for 9600 baud and above the IBRD
value will fit into 6 bits, as per the table in
https://developer.arm.com/documentation/ddi0183/g/programmers-model/register-descriptions/fractional-baud-rate-register--uartfbrd
The only visible effects would be that the value read back from
the register by the guest would be truncated, and we would
print an incorrect baud rate in the debug logs.
Cc: qemu-stable@nongnu.org Fixes: b88cfee90268 ("hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2610 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20241007144732.2491331-1-peter.maydell@linaro.org
(cherry picked from commit cd247eae16ab1b9ce97fd34c000c1b883feeda45) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/intc/arm_gicv3_cpuif: Add cast to match the documentation
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs") Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3db74afec3ca87f81fbdf5918ed1e21d837fbfab) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/intc/arm_gicv3: Add cast to match the documentation
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers") Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 12dc8f6eca1ead876142fd3d6731cf3da1295f2a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/intc/arm_gicv3: Add cast to match the documentation
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()") Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit e0c0ea6eca4f210a52b9742817586cc97b1ee434) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Sun, 6 Oct 2024 07:44:00 +0000 (09:44 +0200)]
meson: ensure -mcx16 is passed when detecting ATOMIC128
Moving -mcx16 out of CPU_CFLAGS caused the detection of ATOMIC128 to
fail, because flags have to be specified by hand in cc.compiles and
cc.links invocations (why oh why??).
Ensure that these tests enable all the instruction set extensions that
will be used to build the emulators.
Fixes: c2bf2ccb266 ("configure: move -mcx16 flag out of CPU_CFLAGS", 2024-05-24) Reported-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8db4e0f92e83fd80b6609439440b303ddded7ad8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/m68k: Always return a temporary from gen_lea_mode
Returning a raw areg does not preserve the value if the areg
is subsequently modified. Fixes, e.g. "jsr (sp)", where the
return address is pushed before the branch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2483 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240813000737.228470-1-richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 352cc9f300d83ea48b8154bfd2ff985fece887d0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tcg/ppc: Use TCG_REG_TMP2 for scratch index in prepare_host_addr
In tcg_out_qemu_ldst_i128, we need a non-zero index register,
which we then use as a base register in several address modes.
Since we always have TCG_REG_TMP2 available, use that.
Cc: qemu-stable@nongnu.org Fixes: 526cd4ec01f ("tcg/ppc: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2597 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 3213da7b9539581c6df95f8ced5b09d0b02d425f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Comparing a string of 4 bytes only works in little-endian.
Adjust bulk bswap to only apply to the note payload.
Perform swapping of the note header manually; the magic
is defined so that it does not need a runtime swap.
Fixes: 83f990eb5adb ("linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2596 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2884596f5f385b5712c356310dd4125a089888a8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: fbd3c4cff6 ("linux-user/arm: Mark the commpage executable")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2525 Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240822095045.72643-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a9ee641bd46f5462eeed183ac3c3760bddfc2600) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit e99441a3793b5 ("ui/curses: Do not use console_select()")
qemu_text_console_put_keysym() no longer checks for NULL console
argument, which leads to a later crash:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x00005555559ee186 in qemu_text_console_handle_keysym (s=0x0, keysym=31) at ../ui/console-vc.c:332
332 } else if (s->echo && (keysym == '\r' || keysym == '\n')) {
(gdb) bt
#0 0x00005555559ee186 in qemu_text_console_handle_keysym (s=0x0, keysym=31) at ../ui/console-vc.c:332
#1 0x00005555559e18e5 in qemu_text_console_put_keysym (s=<optimized out>, keysym=<optimized out>) at ../ui/console.c:303
#2 0x00005555559f2e88 in do_key_event (vs=vs@entry=0x5555579045c0, down=down@entry=1, keycode=keycode@entry=60, sym=sym@entry=65471) at ../ui/vnc.c:2034
#3 0x00005555559f845c in ext_key_event (vs=0x5555579045c0, down=1, sym=65471, keycode=<optimized out>) at ../ui/vnc.c:2070
#4 protocol_client_msg (vs=0x5555579045c0, data=<optimized out>, len=<optimized out>) at ../ui/vnc.c:2514
#5 0x00005555559f515c in vnc_client_read (vs=0x5555579045c0) at ../ui/vnc.c:1607
Fixes: e99441a3793b5 ("ui/curses: Do not use console_select()") Fixes: https://issues.redhat.com/browse/RHEL-50529 Cc: qemu-stable@nongnu.org Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 0e60fc80938d9ce84274a36ddfaaa640bdef2be8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Wed, 2 Oct 2024 08:03:33 +0000 (10:03 +0200)]
testing: bump mips64el cross to bookworm and fix package list
The mips64el cross setup is very broken for bullseye which has now
entered LTS support so is unlikely to be fixed. While we still can't
build the container with all packages for bookworm due to a single
missing dependency that will hopefully get fixed in due course. For
the sake of keeping the CI green we disable the problematic packages
via the lcitool's mappings.yml file.
See also: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1081535
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Disable the problematic packages via lcitool's mappings.yml]
Message-ID: <20241002080333.127172-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c60473d29254b79d9437eface8b342e84663ba66) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jan Luebbe [Fri, 6 Sep 2024 16:48:34 +0000 (18:48 +0200)]
hw/sd/sdcard: Fix handling of disabled boot partitions
The enable bits in the EXT_CSD_PART_CONFIG ext_csd register do *not*
specify whether the boot partitions exist, but whether they are enabled
for booting. Existence of the boot partitions is specified by a
EXT_CSD_BOOT_MULT != 0.
Currently, in the case of boot-partition-size=1M and boot-config=0,
Linux detects boot partitions of 1M. But as sd_bootpart_offset always
returns 0, all reads/writes are mapped to the same offset in the backing
file.
Fix this bug by calculating the offset independent of which partition is
enabled for booting.
This bug is unlikely to affect many users with QEMU's current set of
boards, because only aspeed sets boot-partition-size, and it also
sets boot-config to 8. So to run into this a user would have to
manually mark the boot partition non-booting from within the guest.
Cc: qemu-stable@nongnu.org Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Message-id: 20240906164834.130257-1-jlu@pengutronix.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added note to commit message about effects of bug] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9601076b3b0bced7ed597d1470e3ff2f4e7177d6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Avoid target_ulong for physical address lookups
target_ulong is typedef'ed as a 32-bit integer when building the
qemu-system-arm target, and this is smaller than the size of an
intermediate physical address when LPAE is being used.
Given that Linux may place leaf level user page tables in high memory
when built for LPAE, the kernel will crash with an external abort as
soon as it enters user space when running with more than ~3 GiB of
system RAM.
So replace target_ulong with vaddr in places where it may carry an
address value that is not representable in 32 bits.
Fixes: f3639a64f602ea ("target/arm: Use softmmu tlbs for page table walking") Cc: qemu-stable@nongnu.org Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240927071051.1444768-1-ardb+git@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 67d762e716a7127ecc114e9708254316dd521911) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow overlapping request by removing the assert that made it
impossible. There are only two callers:
1. block_copy_task_create()
It already asserts the very same condition before calling
reqlist_init_req().
2. cbw_snapshot_read_lock()
There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].
In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.
> #5 0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6 0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7 0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8 0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9 0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175
Cc: qemu-stable@nongnu.org Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
(cherry picked from commit 6475155d519209c80fdda53e05130365aa769838) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Mon, 16 Sep 2024 08:53:56 +0000 (09:53 +0100)]
util/timer: avoid deadlock when shutting down
When we shut down a guest we disable the timers. However this can
cause deadlock if the guest has queued some async work that is trying
to advance system time and spins forever trying to wind time forward.
Pay attention to the return code and bail early if we can't wind time
forward.
Reported-by: Elisha Hollander <just4now666666@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-15-alex.bennee@linaro.org>
(cherry picked from commit bc02be4508d8753d1f6071b77d10f4661587df6f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()") contained a typo
in the NIC alias which caused initialisation of the in-built dp83932 NIC to fail
when using the normal -nic user,model=dp83932 command line.
Fixes: e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()") Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2e4fdf566062c03456230fd8136b88c5c1e5c4bf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The loop in the 32-bit case of the vector compare operation
was incorrectly incrementing by 8 bytes per iteration instead
of 4 bytes. This caused the function to process only half of
the intended elements.
Cc: qemu-stable@nongnu.org Fixes: 9622c697d1 (tcg: Add gvec compare with immediate and scalar operand) Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com> Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240904142739.854-2-zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 9d8d5a5b9078a16b4c0862fe54248c5cc8435648) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Bibo Mao [Fri, 13 Sep 2024 09:52:02 +0000 (17:52 +0800)]
hw/loongarch/virt: Add description for virt machine type
The description about virt machine type is removed by mistake, add
new description here. Here is output result with command
"./qemu-system-loongarch64 -M help"
Without the patch, it shows as follows:
Supported machines are:
none empty machine
virt (null) (default)
x-remote Experimental remote machine
Fixes: ef2f11454c(hw/loongarch/virt: Replace Loongson IPI with LoongArch IPI) Signed-off-by: Bibo Mao <maobibo@loongson.cn> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4265b4f358436252ef36164566f316458f1df671) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fabiano Rosas [Wed, 28 Aug 2024 14:56:48 +0000 (11:56 -0300)]
migration/multifd: Fix p->iov leak in multifd-uadk.c
The send_cleanup() hook should free the p->iov that was allocated at
send_setup(). This was missed because the UADK code is conditional on
the presence of the accelerator, so it's not tested by default.
Fixes: 819dd20636 ("migration/multifd: Add UADK initialization") Reported-by: Peter Xu <peterx@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 405e352d28c24991cacfdebccf67d56c4795cf6e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Arman Nabiev [Thu, 22 Aug 2024 16:56:53 +0000 (19:56 +0300)]
target/ppc: Fix migration of CPUs with TLB_EMB TLB type
In vmstate_tlbemb a cut-and-paste error meant we gave
this vmstate subsection the same "cpu/tlb6xx" name as
the vmstate_tlb6xx subsection. This breaks migration load
for any CPU using the TLB_EMB CPU type, because when we
see the "tlb6xx" name in the incoming data we try to
interpret it as a vmstate_tlb6xx subsection, which it
isn't the right format for:
$ qemu-system-ppc -drive
if=none,format=qcow2,file=/home/petmay01/test-images/virt/dummy.qcow2
-monitor stdio -M bamboo
QEMU 9.0.92 monitor - type 'help' for more information
(qemu) savevm foo
(qemu) loadvm foo
Missing section footer for cpu
Error: Error -22 while loading VM state
Correct the incorrect vmstate section name. Since migration
for these CPU types was completely broken before, we don't
need to care that this is a migration compatibility break.
This affects the PPC 405, 440, 460 and e200 CPU families.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2522 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Arman Nabiev <nabiev.arman13@gmail.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 203beb6f047467a4abfc8267c234393cea3f471c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The linux-user hppa target crashes randomly for me since commit 081a0ed188d8 ("target/hppa: Do not mask in copy_iaoq_entry").
That commit dropped the masking of the IAOQ addresses while copying them
from other registers and instead keeps them with all 64 bits up until
the full gva is formed with the help of hppa_form_gva_psw().
So, when running in linux-user mode on an emulated 64-bit CPU, we need
to mask to a 32-bit address space at the very end in hppa_form_gva_psw()
if the PSW-W flag isn't set (which is the case for linux-user on hppa).
Fixes: 081a0ed188d8 ("target/hppa: Do not mask in copy_iaoq_entry") Cc: qemu-stable@nongnu.org # v9.1+ Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit d33d3adb573794903380e03e767e06470514cefe) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 17 Sep 2024 16:13:37 +0000 (17:13 +0100)]
target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
The Neoverse-V1 TRM is a bit confused about the layout of the
ID_AA64ISAR1_EL1 register, and so its table 3-6 has the wrong value
for this ID register. Trust instead section 3.2.74's list of which
fields are set.
This means that we stop incorrectly reporting FEAT_XS as present, and
now report the presence of FEAT_BF16.
Cc: qemu-stable@nongnu.org Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240917161337.3012188-1-peter.maydell@linaro.org
(cherry picked from commit 8676007eff04bb4e454bcdf92fab3f855bcc59b3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jacob Abrams [Wed, 11 Sep 2024 04:32:55 +0000 (21:32 -0700)]
hw/char/stm32l4x5_usart.c: Enable USART ACK bit response
SW modifying USART_CR1 TE bit should cuase HW to respond by altering
USART_ISR TEACK bit, and likewise for RE and REACK bit.
This resolves some but not all issues necessary for the official STM USART
HAL driver to function as is.
Fixes: 87b77e6e01ca ("hw/char/stm32l4x5_usart: Enable serial read and write")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2540 Signed-off-by: Jacob Abrams <satur9nine@gmail.com>
Message-id: 20240911043255.51966-1-satur9nine@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 6cce0dcc6f7aaaeb7f17577776da510b04f67c99) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix a segmentation fault in multifd when rb->receivedmap is cleared
too early.
After commit 5ef7e26bdb ("migration/multifd: solve zero page causing
multiple page faults"), multifd started using the rb->receivedmap
bitmap, which belongs to ram.c and is initialized and *freed* from the
ram SaveVMHandlers.
Multifd threads are live until migration_incoming_state_destroy(),
which is called after qemu_loadvm_state_cleanup(), leading to a crash
when accessing rb->receivedmap.
Move the loadvm cleanup into migration_incoming_state_destroy(), after
multifd_recv_cleanup() to ensure multifd threads have already exited
when rb->receivedmap is cleared.
Adjust the postcopy listen thread comment to indicate that we still
want to skip the cpu synchronization.
CC: qemu-stable@nongnu.org Fixes: 5ef7e26bdb ("migration/multifd: solve zero page causing multiple page faults") Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240917185802.15619-3-farosas@suse.de
[peterx: added comment in migration_incoming_state_destroy()] Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 4ce56229087860805877075ddb29dd44578365a9) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These were passing a NULL buffer pointer unconditionally, which happens
to behave in a mostly benign way (except for the chance of an excess
memory region unref and a bounce buffer leak). Per the function comment,
this was never meant to be accepted though, and triggers an assertion
with the "softmmu: Support concurrent bounce buffers" change.
Given that the code in question never sets up any mappings, just remove
the unnecessary dma_memory_unmap calls along with the DBDMA_io struct
fields that are now entirely unused.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240916175708.1829059-1-mnissler@rivosinc.com> Fixes: be1e343995 ("macio: switch over to new byte-aligned DMA helpers") Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
(cherry picked from commit 2d0a071e625d7234e8c5623b7e7bf445e1bef72c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
softmmu/physmem.c: Keep transaction attribute in address_space_map()
The follow-up transactions may use the data in the attribution, so keep
the value of attribution from the function parameter just as
flatview_translate() above.
Signed-off-by: Fea.Wang <fea.wang@sifive.com> Cc: qemu-stable@nongnu.org Fixes: f26404fbee ("Make address_space_map() take a MemTxAttrs argument") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20240912070404.2993976-2-fea.wang@sifive.com Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit d8d5ca40048b04750de5a0ae0b2b9f153a391951) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
softmmu/physmem: fix memory leak in dirty_memory_extend()
As reported by Peter, we might be leaking memory when removing the
highest RAMBlock (in the weird ram_addr_t space), and adding a new one.
We will fail to realize that we already allocated bitmaps for more
dirty memory blocks, and effectively discard the pointers to them.
Fix it by getting rid of last_ram_page() and by remembering the number
of dirty memory blocks that have been allocated already.
While at it, let's use "unsigned int" for the number of blocks, which
should be sufficient until we reach ~32 exabytes.
Looks like this leak was introduced as we switched from using a single
bitmap_zero_extend() to allocating multiple bitmaps:
bitmap_zero_extend() relies on g_renew() which should have taken care of
this.
Resolves: https://lkml.kernel.org/r/CAFEAcA-k7a+VObGAfCFNygQNfCKL=AfX6A4kScq=VSSK0peqPg@mail.gmail.com Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 5b82b703b69a ("memory: RCU ram_list.dirty_memory[] for safe RAM hotplug") Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20240828090743.128647-1-david@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit b84f06c2bee727b3870b4eeccbe3a45c5aea14c1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mattias Nissler [Mon, 19 Aug 2024 13:54:54 +0000 (06:54 -0700)]
softmmu: Support concurrent bounce buffers
When DMA memory can't be directly accessed, as is the case when
running the device model in a separate process without shareable DMA
file descriptors, bounce buffering is used.
It is not uncommon for device models to request mapping of several DMA
regions at the same time. Examples include:
* net devices, e.g. when transmitting a packet that is split across
several TX descriptors (observed with igb)
* USB host controllers, when handling a packet with multiple data TRBs
(observed with xhci)
Previously, qemu only provided a single bounce buffer per AddressSpace
and would fail DMA map requests while the buffer was already in use. In
turn, this would cause DMA failures that ultimately manifest as hardware
errors from the guest perspective.
This change allocates DMA bounce buffers dynamically instead of
supporting only a single buffer. Thus, multiple DMA mappings work
correctly also when RAM can't be mmap()-ed.
The total bounce buffer allocation size is limited individually for each
AddressSpace. The default limit is 4096 bytes, matching the previous
maximum buffer size. A new x-max-bounce-buffer-size parameter is
provided to configure the limit for PCI devices.
gitlab: stable staging branches publish containers in a separate tag
Due to a copy+paste mistake, that commit included "QEMU_JOB_SKIPPED"
in the final rule that was meant to be a 'catch all' for staging
branches.
As a result stable branches are still splattering dockers from the
primary development branch.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20240906140958.84755-1-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8d5ab746b1e6668ffb0378820b25665b385c8573) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Gert Wollny [Wed, 11 Sep 2024 09:14:30 +0000 (09:14 +0000)]
ui/sdl2: set swap interval explicitly when OpenGL is enabled
Before 176e3783f2ab (ui/sdl2: OpenGL window context)
SDL_CreateRenderer was called unconditionally setting
the swap interval to 0. Since SDL_CreateRenderer is now no
longer called when OpenGL is enabled, the swap interval is
no longer set explicitly and vsync handling depends on
the environment settings which may lead to a performance
regression with virgl as reported in
https://gitlab.com/qemu-project/qemu/-/issues/2565
Restore the old vsync handling by explicitly calling
SDL_GL_SetSwapInterval if OpenGL is enabled.
Fixes: 176e3783f2ab (ui/sdl2: OpenGL window context) Closes: https://gitlab.com/qemu-project/qemu/-/issues/2565 Signed-off-by: Gert Wollny <gert.wollny@collabora.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <01020191e05ce6df-84da6386-62c2-4ce8-840e-ad216ac253dd-000000@eu-west-1.amazonses.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit ae23cd00170baaa2777eb1ee87b70f472dbb3c44) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e45c10 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org Fixes: 8d999995e45c10 ("arm_gic: Fix GIC pending behavior") Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 110684c9a69a02cbabfbddcd3afa921826ad565c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, the guest may write to the device configuration space,
whereas the virtio sound device specification in chapter 5.14.4
clearly states that the fields in the device configuration space
are driver-read-only.
Remove the set_config function from the virtio_snd class.
This also prevents a heap buffer overflow. See QEMU issue #2296.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2296 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240901130112.8242-1-vr_qemu@t-online.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7fc6611cad3e9627b23ce83e550b668abba6c886) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Mon, 2 Sep 2024 15:47:49 +0000 (17:47 +0200)]
contrib/plugins/Makefile: Add a 'distclean' target
Running "make distclean" in the build tree currently fails since this
tries to run the "distclean" target in the contrib/plugins/ folder, too,
but the Makefile there is missing this target. Thus add 'distclean' there
to fix this issue.
And to avoid regressions with "make distclean", add this command to one
of the build jobs, too.
Message-ID: <20240902154749.73876-1-thuth@redhat.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 1231bc7d12c373e445171dda9e7e5146eee7da55) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 10 Sep 2024 17:38:52 +0000 (18:38 +0100)]
tests/docker: update debian i686 and mipsel images to bookworm
Whatever issues there were which stopped these being updates when the
rest were have now been resolved. However mips64el continues to be
broken so don't update it here.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-3-alex.bennee@linaro.org>
(cherry picked from commit 19d2111059c87d3f58349f27b9be9dee81fc1681) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 10 Sep 2024 17:38:51 +0000 (18:38 +0100)]
tests/docker: remove debian-armel-cross
As debian-11 transitions to LTS we are starting to have problems
building the image. While we could update to a later Debian building a
32 bit QEMU without modern floating point is niche host amongst the
few remaining 32 bit hosts we regularly build for. For now we still
have armhf-debian-cross-container which is currently built from the
more recent debian-12.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-2-alex.bennee@linaro.org>
(cherry picked from commit d0068b746a0a8cd4bb148527a0d199b130cd5288) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: avoid leak of ctx when bad cipher mode is given
Fixes: Coverity CID 1546884 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 586ac2c67d707c2588766c5195d94fa553cc25af) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: check gnutls & gcrypt support the requested pbkdf hash
Both gnutls and gcrypt can be configured to exclude support for certain
algorithms via a runtime check against system crypto policies. Thus it
is not sufficient to have a compile time test for hash support in their
pbkdf implementations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit e6c09ea4f9e5f8af92a6453642b84b9efd52892f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: run qcrypto_pbkdf2_count_iters in a new thread
CPU time accounting in the kernel has been demonstrated to have a
sawtooth pattern[1][2]. This can cause the getrusage system call to
not be as accurate as we are expecting, which can cause this calculation
to stall.
The kernel discussions shows that this inaccuracy happens when CPU time
gets big enough, so this patch changes qcrypto_pbkdf2_count_iters to run
in a fresh thread to avoid this inaccuracy. It also adds a sanity check
to fail the process if CPU time is not accounted.
Resolves: #2398 Signed-off-by: Tiago Pasqualini <tiago.pasqualini@canonical.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit c72cab5ad9f849bbcfcf4be7952b8b8946cc626e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: push error reporting into TLS session I/O APIs
This has the effect of changing the output from one of the NBD
tests.
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 48b8583698d96d6290726400789fcd51c55691b1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/hppa: Fix PSW V-bit packaging in cpu_hppa_get for hppa64
While adding hppa64 support, the psw_v variable got extended from 32 to 64
bits. So, when packaging the PSW-V bit from the psw_v variable for interrupt
processing, check bit 31 instead the 63th (sign) bit.
This fixes a hard to find Linux kernel boot issue where the loss of the PSW-V
bit due to an ITLB interruption in the middle of a series of ds/addc
instructions (from the divU milicode library) generated the wrong division
result and thus triggered a Linux kernel crash.
Link: https://lore.kernel.org/lkml/718b8afe-222f-4b3a-96d3-93af0e4ceff1@roeck-us.net/ Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 931adff31478 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64") Cc: qemu-stable@nongnu.org # v8.2+
(cherry picked from commit ead5078cf1a5f11d16e3e8462154c859620bcc7e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
John Snow [Thu, 22 Aug 2024 20:48:03 +0000 (16:48 -0400)]
docs/sphinx: fix extra stuff in TOC after freeform QMP sections
Freeform sections with titles are currently generating a TOC entry for
the first paragraph in the section after the header, which is not what
we want.
(Easiest to observe directly in the QMP reference manual's
"Introduction" section.)
When freeform sections are parsed, we create both a section header *and*
an empty, title-less section. This causes some problems with sphinx's
post-parse tree transforms, see also 2664f317 - this is a similar issue:
Sphinx doesn't like section-less titles and it also doesn't like
title-less sections.
Modify qapidoc.py to parse text directly into the preceding section
title as child nodes, eliminating the section duplication. This removes
the extra text from the TOC.
Only very, very lightly tested: "it looks right at a glance" :tm:. I am
still in the process of rewriting qapidoc, so I didn't give it much
deeper thought.
Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240822204803.1649762-1-jsnow@redhat.com>
Eric Blake [Thu, 22 Aug 2024 14:35:29 +0000 (09:35 -0500)]
nbd/server: CVE-2024-7409: Avoid use-after-free when closing server
Commit 3e7ef738 plugged the use-after-free of the global nbd_server
object, but overlooked a use-after-free of nbd_server->listener.
Although this race is harder to hit, notice that our shutdown path
first drops the reference count of nbd_server->listener, then triggers
actions that can result in a pending client reaching the
nbd_blockdev_client_closed() callback, which in turn calls
qio_net_listener_set_client_func on a potentially stale object.
If we know we don't want any more clients to connect, and have already
told the listener socket to shut down, then we should not be trying to
update the listener socket's associated function.
* tag 'pull-request-2024-08-26' of https://gitlab.com/thuth/qemu:
tests/qtest: Delete previous boot file
.gitlab-ci.d/windows.yml: Disable the qtests in the MSYS2 job
gitlab-ci: Replace build_script -> step_script in Cirrus jobs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Akihiko Odaki [Fri, 23 Aug 2024 06:13:12 +0000 (15:13 +0900)]
tests/qtest: Delete previous boot file
A test run may create boot files several times. Delete the previous boot
file before creating a new one.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240823-san-v4-7-a24c6dfa4ceb@daynix.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 20 Aug 2024 17:01:42 +0000 (19:01 +0200)]
.gitlab-ci.d/windows.yml: Disable the qtests in the MSYS2 job
The qtests are broken since a while in the MSYS2 job in the gitlab-CI,
likely due to some changes in the MSYS2 environment. So far nobody has
neither a clue what's going wrong here, nor an idea how to fix this
(in fact most QEMU developers even don't have a Windows environment
available for properly analyzing this problem), so we should disable the
qtests here for the time being to get at least test coverage again
for the remaining tests that are run here.
Since we already get compile-test coverage for the system emulation
in the cross-win64-system job, and since the MSYS2 job is one of the
longest running jobs in our CI (it takes more than 1 hour to complete),
let's seize the opportunity and also cut the run time by disabling
the system emulation completely here, including the libraries that
are only useful for system emulation. In case somebody ever figures
out the failure of the qtests on MSYS2, we can revert this patch
to get everything back.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240820170142.55324-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
gitlab-ci: Replace build_script -> step_script in Cirrus jobs
Long due upgrade, see [1]:
In GitLab Runner 13.2 a translation for step_script to
build_script was added to the custom executor. In 14.0
the build_script stage will be replaced with step_script.
We are using GitLab 17 [2]!
This removes the following warning:
WARNING: Starting with version 17.0 the 'build_script'
stage will be replaced with 'step_script':
https://gitlab.com/groups/gitlab-org/-/epics/6112
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240816213203.18350-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging
trivial patches for 2024-08-23
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmbImVIACgkQcBtPaxpp
# PllP3wf/TaYAQs0HkQRQ62/2wqnfABpZYft/g6EhHveZ/04pJ/eNIIiVqqUg4DGs
# i8fENABRlRPoeK5HtGVhHYbOg6tzje7MR0qdSmWaKb2R5pPqkLHZ6NTtQlINLpOb
# O8Nh1c5/qDW/pDPCWVLkEMTqKhtGfINr0pHSlTfOr0W9FrU1I6srvr6AZtrTORlL
# 5b79j5IZGQSj5zR3ViuKyEPdA5NRSeTOewg8WCKGSxZGk4OlVPevrEAGOyQReOuN
# HTfNi8KQH/pPzl6+f+THkgKmYYfUAlPvzkJDndV9vcPFLPI8ZncZ1o1Kmog6UERc
# s5J2vTcir/ReEukApRRsZkKHLAoYdQ==
# =Srl8
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Aug 2024 12:14:42 AM AEST
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
hw/display/vhost-user-gpu.c: fix vhost_user_gpu_chr_read()
system/vl.c: Print machine name, not "(null)", for unknown machine types
hw/x86: add a couple of comments explaining how the kernel image is parsed
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Thu, 22 Aug 2024 12:23:10 +0000 (13:23 +0100)]
system/vl.c: Print machine name, not "(null)", for unknown machine types
In commit 412d294ffdc we tried to improve the error message printed when
the machine type is unknown, but we used the wrong variable, resulting in:
$ ./build/x86/qemu-system-aarch64 -M bang
qemu-system-aarch64: unsupported machine type: "(null)"
Use -machine help to list supported machines
Use the right variable, so we produce more helpful output:
$ ./build/x86/qemu-system-aarch64 -M bang
qemu-system-aarch64: unsupported machine type: "bang"
Use -machine help to list supported machines
Note that we must move the qdict_del() to below the error_setg(),
because machine_type points into the value of that qdict entry,
and deleting it will make the pointer invalid.
Cc: qemu-stable@nongnu.org Fixes: 412d294ffdc ("vl.c: select_machine(): add selected machine type to error message") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ani Sinha [Fri, 19 Jul 2024 13:49:37 +0000 (19:19 +0530)]
hw/x86: add a couple of comments explaining how the kernel image is parsed
Cosmetic: add comments in x86_load_linux() pointing to the kernel documentation
so that users can better understand the code.
CC: qemu-trivial@nongnu.org Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Merge tag 'pull-loongarch-20240821' of https://gitlab.com/gaosong/qemu into staging
Fix for 9.1
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZsVYjgAKCRBAov/yOSY+
# 306ZA/9/DFdJB5WbVtv8ZNaRKT2jj6N9o5YlLbO1HsdMGpJbDWNJAIrOIdfBCYzF
# oEvjuYItBI9DXcSUE748ucBkct/x4WkBwfL5mxfTRXOhvx3iKFeC2ZKyKPtsciRO
# QE4UDmrFbQ9IrW33Vw0+CRMlN/U8xBO7lPDfbk2MA7fM74ns8A==
# =EbRt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Aug 2024 01:01:34 PM AEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240821' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Fix length for lowram in ACPI SRAT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: fc100011f38d ("hw/loongarch: Refine acpi srat table for numa memory") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
Merge tag 'pull-misc-20240821' of https://gitlab.com/rth7680/qemu into staging
target/i386: Fix carry flag for BLSI
target/i386: Fix tss access size in switch_tss_ra
linux-user: Handle short reads in mmap_h_gt_g
bsd-user: Handle short reads in mmap_h_gt_g
* tag 'pull-misc-20240821' of https://gitlab.com/rth7680/qemu:
target/i386: Fix tss access size in switch_tss_ra
target/i386: Fix carry flag for BLSI
target/i386: Split out gen_prepare_val_nz
bsd-user: Handle short reads in mmap_h_gt_g
linux-user: Handle short reads in mmap_h_gt_g
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The two limit_max variables represent size - 1, just like the
encoding in the GDT, thus the 'old' access was off by one.
Access the minimal size of the new tss: the complete tss contains
the iopb, which may be a larger block than the access api expects,
and irrelevant because the iopb is not accessed during the
switch itself.
Fixes: 8b131065080a ("target/i386/tcg: use X86Access for TSS access")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2511 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240819074052.207783-1-richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Split out the TCG_COND_TSTEQ logic from gen_prepare_eflags_z,
and use it for CC_OP_BMILG* as well. Prepare for requiring
both zero and non-zero senses.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240801075845.573075-2-richard.henderson@linaro.org>
In particular, if an image has a large bss, we can hit EOF before reading
all bytes of the mapping. Mirror the similar change to linux-user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240820050848.165253-3-richard.henderson@linaro.org>
Peter Maydell [Tue, 20 Aug 2024 14:44:29 +0000 (15:44 +0100)]
migration/multifd: Free MultiFDRecvParams::data
In multifd_recv_setup() we allocate (among other things)
* a MultiFDRecvData struct to multifd_recv_state::data
* a MultiFDRecvData struct to each multfd_recv_state->params[i].data
(Then during execution we might swap these pointers around.)
But in multifd_recv_cleanup() we free multifd_recv_state->data
in multifd_recv_cleanup_state() but we don't ever free the
multifd_recv_state->params[i].data. This results in a memory
leak reported by LeakSanitizer:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../" \
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/file/mapped-ram )
[...]
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9c83c in multifd_recv_setup migration/multifd.c:1606:19
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9bed9 in multifd_recv_setup migration/multifd.c:1588:32
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
SUMMARY: AddressSanitizer: 96 byte(s) leaked in 4 allocation(s).
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: regression fixes
3 small patches to make sure we don't ship regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbEdw8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp0dsIAKTzhmBR3IviFQVo223RgcDfthxoKejTB5tv
# EhGVUi4ddrViIIHsKFZ0pTHXnRcwHpPRokg6GrbqNhrAM6K7ptP8pkEK1DDkbGtq
# HaeceK55nNZ/wM1O5xHpRLVc2WtxmBrliDTFHGB2HjURO/kpjoHqWbE6Sn4GILc1
# EYU2T3Wn1UFgj+H4L7yF4SzmQSmyzq+7Tml6Z2GzpsatdwCoFQz2nA28piCnRMCq
# lusMo2YdE6js9JS/h+zMqgKValuCyuU7S7ZbSO2dvYQwt/hgk07BegBrdsAENNh6
# 0IWRHrojwAg+4U6ULzbrBG6/hW2A8Q5065D8Nf9Bjy4eAU7QSbU=
# =K6xx
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:59:27 PM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio-pci: Fix the use of an uninitialized irqfd
hw/audio/virtio-snd: fix invalid param check
vhost: Add VIRTIO_NET_F_RSC_EXT to vhost feature bits
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cindy Lu [Tue, 6 Aug 2024 09:37:12 +0000 (17:37 +0800)]
virtio-pci: Fix the use of an uninitialized irqfd
The crash was reported in MAC OS and NixOS, here is the link for this bug
https://gitlab.com/qemu-project/qemu/-/issues/2334
https://gitlab.com/qemu-project/qemu/-/issues/2321
In this bug, they are using the virtio_input device. The guest notifier was
not supported for this device, The function virtio_pci_set_guest_notifiers()
was not called, and the vector_irqfd was not initialized.
So the fix is adding the check for vector_irqfd in virtio_pci_get_notifier()
The function virtio_pci_get_notifier() can be used in various devices.
It could also be called when VIRTIO_CONFIG_S_DRIVER_OK is not set. In this situation,
the vector_irqfd being NULL is acceptable. We can allow the device continue to boot
If the vector_irqfd still hasn't been initialized after VIRTIO_CONFIG_S_DRIVER_OK
is set, it means that the function set_guest_notifiers was not called before the
driver started. This indicates that the device is not using the notifier.
At this point, we will let the check fail.
This fix is verified in vyatta,MacOS,NixOS,fedora system.
The bt tree for this bug is:
Thread 6 "CPU 0/KVM" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7c817be006c0 (LWP 1269146)]
kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
817 if (irqfd->users == 0) {
(gdb) thread apply all bt
...
Thread 6 (Thread 0x7c817be006c0 (LWP 1269146) "CPU 0/KVM"):
0 kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
1 kvm_virtio_pci_vector_use_one () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:893
2 0x00005983657045e2 in memory_region_write_accessor () at ../qemu-9.0.0/system/memory.c:497
3 0x0000598365704ba6 in access_with_adjusted_size () at ../qemu-9.0.0/system/memory.c:573
4 0x0000598365705059 in memory_region_dispatch_write () at ../qemu-9.0.0/system/memory.c:1528
5 0x00005983659b8e1f in flatview_write_continue_step.isra.0 () at ../qemu-9.0.0/system/physmem.c:2713
6 0x000059836570ba7d in flatview_write_continue () at ../qemu-9.0.0/system/physmem.c:2743
7 flatview_write () at ../qemu-9.0.0/system/physmem.c:2774
8 0x000059836570bb76 in address_space_write () at ../qemu-9.0.0/system/physmem.c:2894
9 0x0000598365763afe in address_space_rw () at ../qemu-9.0.0/system/physmem.c:2904
10 kvm_cpu_exec () at ../qemu-9.0.0/accel/kvm/kvm-all.c:2917
11 0x000059836576656e in kvm_vcpu_thread_fn () at ../qemu-9.0.0/accel/kvm/kvm-accel-ops.c:50
12 0x0000598365926ca8 in qemu_thread_start () at ../qemu-9.0.0/util/qemu-thread-posix.c:541
13 0x00007c8185bcd1cf in ??? () at /usr/lib/libc.so.6
14 0x00007c8185c4e504 in clone () at /usr/lib/libc.so.6
Fixes: 2ce6cff94d ("virtio-pci: fix use of a released vector") Cc: qemu-stable@nongnu.org Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240806093715.65105-1-lulu@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Volker Rümelin [Fri, 2 Aug 2024 07:18:05 +0000 (09:18 +0200)]
hw/audio/virtio-snd: fix invalid param check
Commit 9b6083465f ("virtio-snd: check for invalid param shift
operands") tries to prevent invalid parameters specified by the
guest. However, the code is not correct.
Change the code so that the parameters format and rate, which are
a bit numbers, are compared with the bit size of the data type.
Fixes: 9b6083465f ("virtio-snd: check for invalid param shift operands") Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240802071805.7123-1-vr_qemu@t-online.de> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Akihiko Odaki [Fri, 2 Aug 2024 05:38:19 +0000 (14:38 +0900)]
vhost: Add VIRTIO_NET_F_RSC_EXT to vhost feature bits
VIRTIO_NET_F_RSC_EXT is implemented in the rx data path, which vhost
implements, so vhost needs to support the feature if it is ever to be
enabled with vhost. The feature must be disabled otherwise.
Fixes: 2974e916df87 ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK") Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240802-rsc-v1-1-2b607bd2f555@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Klaus Jensen [Tue, 20 Aug 2024 04:16:48 +0000 (06:16 +0200)]
hw/nvme: fix leak of uninitialized memory in io_mgmt_recv
Yutaro Shimizu from the Cyber Defense Institute discovered a bug in the
NVMe emulation that leaks contents of an uninitialized heap buffer if
subsystem and FDP emulation are enabled.
Cc: qemu-stable@nongnu.org Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Merge tag 'hw-misc-20240820' of https://github.com/philmd/qemu into staging
Various fixes
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
* tag 'hw-misc-20240820' of https://github.com/philmd/qemu:
crypto/tlscredspsk: Free username on finalize
hw/i386/pc: Ensure vmport prerequisites are fulfilled
hw/i386/pc: Unify vmport=auto handling
hw/ppc/Kconfig: Add missing SERIAL_ISA dependency to POWERNV machine
target/sparc: Restrict STQF to sparcv9
contrib/plugins/execlog: Fix shadowed declaration warning
tests/avocado: Mark ppc_hv_tests.py as non-flaky after fixed console interaction
tests/avocado: exec_command should not consume console output
linux-user/mips: Select Loongson CPU for Loongson binaries
linux-user/mips: Select MIPS64R2-generic for Rel2 binaries
linux-user/mips: Select Octeon68XX CPU for Octeon binaries
linux-user/mips: Do not try to use removed R5900 CPU
hw/remote/message.c: Don't directly invoke DeviceClass:reset
hw/dma/xilinx_axidma: Use semicolon at end of statement, not comma
target/mips: Load PTE as DATA
target/mips: Use correct MMU index in get_pte()
target/mips: Pass page table entry size as MemOp to get_pte()
qemu-options.hx: correct formatting -smbios type=4
hw/mips/loongson3_virt: Fix condition of IPI IOCSR connection
hw/mips/loongson3_virt: Store core_iocsr into LoongsonMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Mon, 19 Aug 2024 14:50:21 +0000 (15:50 +0100)]
crypto/tlscredspsk: Free username on finalize
When the creds->username property is set we allocate memory
for it in qcrypto_tls_creds_psk_prop_set_username(), but
we never free this when the QCryptoTLSCredsPSK is destroyed.
Free the memory in finalize.
This fixes a LeakSanitizer complaint in migration-test:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x5624e5c99dee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218edee) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
#1 0x7fb199ae9738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fb199afe583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x5624e82ea919 in qcrypto_tls_creds_psk_prop_set_username /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../crypto/tlscredspsk.c:255:23
#4 0x5624e812c6b5 in property_set_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:2277:5
#5 0x5624e8125ce5 in object_property_set /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:1463:5
#6 0x5624e8136e7c in object_set_properties_from_qdict /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:55:14
#7 0x5624e81372d2 in user_creatable_add_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:112:5
#8 0x5624e8137964 in user_creatable_add_qapi /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:157:11
#9 0x5624e891ba3c in qmp_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/qom-qmp-cmds.c:227:5
#10 0x5624e8af9118 in qmp_marshal_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-commands-qom.c:337:5
#11 0x5624e8bd1d49 in do_qmp_dispatch_bh /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qapi/qmp-dispatch.c:128:5
#12 0x5624e8cb2531 in aio_bh_call /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:171:5
#13 0x5624e8cb340c in aio_bh_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:218:13
#14 0x5624e8c0be98 in aio_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/aio-posix.c:423:5
#15 0x5624e8cba3ce in aio_ctx_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:360:5
#16 0x7fb199ae0d3a in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#17 0x7fb199ae0d3a in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#18 0x5624e8cbe1d9 in glib_pollfds_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:287:9
#19 0x5624e8cbcb13 in os_host_main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:310:5
#20 0x5624e8cbc6dc in main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:589:11
#21 0x5624e6f3f917 in qemu_main_loop /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/runstate.c:801:9
#22 0x5624e893379c in qemu_default_main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:37:14
#23 0x5624e89337e7 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:48:12
#24 0x7fb197972d8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#25 0x7fb197972e3f in __libc_start_main csu/../csu/libc-start.c:392:3
#26 0x5624e5c16fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
SUMMARY: AddressSanitizer: 5 byte(s) leaked in 1 allocation(s).
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240819145021.38524-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Kamil Szczęk [Sat, 17 Aug 2024 15:26:15 +0000 (15:26 +0000)]
hw/i386/pc: Ensure vmport prerequisites are fulfilled
Since commit 4ccd5fe22feb95137d325f422016a6473541fe9f ('pc: add option
to disable PS/2 mouse/keyboard'), the vmport will not be created unless
the i8042 PS/2 controller is enabled. To avoid confusion, let's fail if
vmport was explicitly requested, but the i8042 controller is disabled.
This also changes the behavior of vmport=auto to take i8042 controller
availability into account.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <0MS3y5E-hHqODIhiuFxmCnIrXd612JIGq31UuMsz4KGCKZ_wWuF-PHGKTRSGS0nWaPEddOdF4YOczHdgorulECPo792OhWov7O9BBF6UMX4=@szczek.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Kamil Szczęk [Sat, 17 Aug 2024 15:25:31 +0000 (15:25 +0000)]
hw/i386/pc: Unify vmport=auto handling
The code which translates vmport=auto to on/off is currently separate
for each PC machine variant, while being functionally equivalent.
This moves the translation into a shared initialization function, while
also tightening the enum assertion.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <v8pz1uwgIYWkidgZK-o8H-qJvnSyl0641XVmNO43Qls307AA3QRPuad_py6xGe0JAxB6yDEe76oZ8tau_n-2Y6sJBCKzCujNbEUUFhd-ahI=@szczek.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bernhard Beschow [Wed, 14 Aug 2024 18:15:32 +0000 (20:15 +0200)]
hw/ppc/Kconfig: Add missing SERIAL_ISA dependency to POWERNV machine
The machine calls serial_hds_isa_init() which is provided by serial-isa.c,
guarded by SERIAL_ISA.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240814181534.218964-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
../contrib/plugins/execlog.c: In function ‘vcpu_tb_trans’:
../contrib/plugins/execlog.c:236:22: error: declaration of ‘n’ shadows a previous local [-Werror=shadow=local]
236 | for (int n = 0; n < all_reg_names->len; n++) {
| ^
../contrib/plugins/execlog.c:184:12: note: shadowed declaration is here
184 | size_t n = qemu_plugin_tb_n_insns(tb);
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240814233645.944327-2-pierrick.bouvier@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
projects / thirdparty / qemu.git / log
