Yann Dirson [Fri, 23 Jun 2006 22:04:05 +0000 (00:04 +0200)]
git-commit: filter out log message lines only when editor was run.
The current behaviour strips out lines starting with a # even when fed
through stdin or -m. This is particularly bad when importing history from
another SCM (tailor 0.9.23 uses git-commit). In the best cases all lines
are stripped and the commit fails with a confusing "empty log message"
error, but in many cases the commit is done, with loss of information.
Note that it is quite peculiar to just have "#" handled as a leading
comment char here. One commonly meet CVS: or CG: or STG: as prefixes, and
using GIT: would be more robust as well as consistent with other commit
tools. However, that would break any tool relying on the # (if any).
Signed-off-by: Yann Dirson <ydirson@altern.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Peter Eriksen [Sat, 24 Jun 2006 14:01:25 +0000 (16:01 +0200)]
Rename safe_strncpy() to strlcpy().
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
apply: replace NO_ACCURATE_DIFF with --inaccurate-eof runtime flag.
It does not make much sense to build git whose behaviour is
different depending on the brokenness of diff implementation of
the platform because the brokenness of the patch that is applied
with the tool depends on brokenness of the diff the person who
generates the patch uses. So we do not use NO_ACCURATE_DIFF
anymore, but help people to apply patches that do not record
incomplete lines correctly with a runtime flag.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 24 Jun 2006 12:19:30 +0000 (05:19 -0700)]
repo-config: fix printing of bool
When a bool variable appears without any value, it means true.
However, replacing the NULL value with an empty string, an earlier
commit f067a13745fbeae1aa357876348a00e5edd0a629 broke show-config.
Martin Langhoff [Sat, 24 Jun 2006 09:41:25 +0000 (21:41 +1200)]
git-repack -- respect -q and be quiet
git-repack was passing the -q along to pack-objects but ignoring it
itself. Correct the oversight. Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 24 Jun 2006 08:06:51 +0000 (01:06 -0700)]
Merge branch 'pb/error'
* pb/error:
usage: minimum type fix.
Customizable error handlers
git-merge: Don't use -p when outputting summary
git-commit: allow -e option anywhere on command line
patch-id: take "commit" prefix as well as "diff-tree" prefix
Petr Baudis [Sat, 24 Jun 2006 02:34:38 +0000 (04:34 +0200)]
Customizable error handlers
This patch makes the usage(), die() and error() handlers customizable.
Nothing in the git code itself uses that but many other libgit users
(like Git.pm) will.
This is implemented using the mutator functions primarily because you
cannot directly modifying global variables of libgit from a program that
dlopen()ed it, apparently. But having functions for that is a better API
anyway.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jeff King [Fri, 23 Jun 2006 13:43:38 +0000 (09:43 -0400)]
git-commit: allow -e option anywhere on command line
Previously, the command 'git-commit -e -m foo' would ignore the '-e' option
because the '-m' option overwrites the no_edit flag during sequential
option parsing. Now we cause -e to reset the no_edit flag after all
options are parsed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Thu, 22 Jun 2006 20:53:31 +0000 (13:53 -0700)]
Tweak diff colors
This patch does:
- always reset the color _before_ printing out the newline.
This is actually important. You (and Johannes) didn't see it, because
it only matters if you set the background, but if you don't do this,
you get some random and funky behaviour if you pick a color with a
non-default background (which still potentially has problems with tabs
etc, but less so).
- allow people to have a different color for the "file headers"
(DIFF_METAINFO) and for the "fragment header" (DIFF_FRAGINFO). Also,
make a difference between "normal color" and "reset colors"
- default to red/green for old/new lines. That's the norm, I'd think.
- instead of that eye-popping (and eye-ball-with-a-fondue-fork-popping)
purple color for metadata, use bold-face for file headers, and cyan for
the frag headers. I actually prefer the "gray background" for that, but
it only works well in xterms, so COLOR_CYAN it is..
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 22 Jun 2006 17:36:26 +0000 (10:36 -0700)]
Merge branch 'master' into next
* master:
git-svn: fix commit --edit flag when using SVN:: libraries
Makefile: do not force unneeded recompilation upon GIT_VERSION changes
Check and document the options to prevent mistakes.
Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Junio C Hamano [Thu, 22 Jun 2006 17:35:13 +0000 (10:35 -0700)]
Merge branch 'js/lsfix'
* js/lsfix:
Initialize lock_file struct to all zero.
Make git-update-ref a builtin
Make git-update-index a builtin
Make git-stripspace a builtin
Make git-mailinfo a builtin
Make git-mailsplit a builtin
Make git-write-tree a builtin
Junio C Hamano [Thu, 22 Jun 2006 17:34:02 +0000 (10:34 -0700)]
Merge branch 'ew/rebase'
* ew/rebase:
rebase --merge: fix for rebasing more than 7 commits.
rebase: error out for NO_PYTHON if they use recursive merge
Add renaming-rebase test.
rebase: Allow merge strategies to be used when rebasing
Junio C Hamano [Thu, 22 Jun 2006 17:33:34 +0000 (10:33 -0700)]
Merge branch 'jn/web'
* jn/web:
gitweb: whitespace cleanup around '='
gitweb: Use $hash_base as $search_hash if possible
gitweb: Make use of $PATH_INFO for project parameter
Move $gitbin earlier in gitweb.cgi
Add git version to gitweb output
gitweb: whitespace cleanup
gitweb: style done with stylesheet
gitweb: A couple of page title tweaking
Fix: Support for the standard mime.types map in gitweb
gitweb: add type="text/css" to stylesheet link
Make CSS file gitweb/gitweb.css more readable
Fix gitweb stylesheet
Support for the standard mime.types map in gitweb
gitweb: text files for 'blob_plain' action without charset by default
gitweb: safely output binary files for 'blob_plain' action
Move gitweb style to gitweb.css
Junio C Hamano [Thu, 22 Jun 2006 17:25:51 +0000 (10:25 -0700)]
Merge branch 'jc/upload-corrupt'
* jc/upload-corrupt:
daemon: send stderr to /dev/null instead of closing.
upload-pack/fetch-pack: support side-band communication
Retire git-clone-pack
upload-pack: prepare for sideband message support.
upload-pack: avoid sending an incomplete pack upon failure
Junio C Hamano [Thu, 22 Jun 2006 09:18:51 +0000 (02:18 -0700)]
Merge branch 'ff/c99'
* ff/c99:
Remove all void-pointer arithmetic.
Change types used in bitfields to be `int's.
Don't use empty structure initializers.
Cast pointers to `void *' when used in a format.
Don't instantiate structures with FAMs.
Initialize FAMs using `FLEX_ARRAY'.
Remove ranges from switch statements.
Junio C Hamano [Thu, 22 Jun 2006 09:15:45 +0000 (02:15 -0700)]
Merge branch 'pb/config'
* pb/config:
git_config: access() returns 0 on success, not > 0
repo-config: Fix late-night bug
Read configuration also from $HOME/.gitconfig
Fix setting config variables with an alternative GIT_CONFIG
Support for extracting configuration from different files
Junio C Hamano [Thu, 22 Jun 2006 08:44:54 +0000 (01:44 -0700)]
rebase --merge: fix for rebasing more than 7 commits.
Instead of using 4-digit numbers to name commits being rebased,
just use "cmt.$msgnum" string, with $msgnum as a decimal number
without leading zero padding. This makes it possible to rebase
more than 9999 commits, but of more practical importance is that
the earlier code used "printf" to format already formatted
$msgnum and barfed when it counted up to 0008. In other words,
the old code was incapable of rebasing more than 7 commits, and
this fixes that problem.
Check and document the options to prevent mistakes.
When multiple recipients are given to git-send-email on the same
--cc line the code does not properly handle it.
Full and proper parsing of the email addresses so I can detect
which commas mean a new email address is more than I care to implement.
In particular this email address: "bibo,mao" <bibo.mao@intel.com>
must not be treated as two email addresses.
So this patch simply treats all commas in recipient lists as
an error and fails if one is given.
At the same time it documents that git-send-email wants multiple
instances of --cc specified on the command line if you want to
cc multiple recipients.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Yakov Lerner [Thu, 22 Jun 2006 01:47:00 +0000 (04:47 +0300)]
Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Before this patch, -DDEFAULT_GIT_TEMPLATE_DIR was passed on compilation
command line to all and every .c file compiled. In fact the macro
is used by only one .c file, and unused by all other .c files.
Remove -DDEFAULT_GIT_TEMPLATE_DIR where unused. Follow the example of
exec_cmd.o. Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Wed, 21 Jun 2006 15:06:39 +0000 (17:06 +0200)]
gitweb: Make use of $PATH_INFO for project parameter
Allow to have project name in the path part of URL, just after the name of
script. For example instead of gitweb.cgi?p=git.git you can write
gitweb.cgi/git.git or gitweb.cgi/git.git/
Not used in URLs inside gitweb; it means that the above alternate syntax
must be generated by hand, at least for now.
Side effect: project name parameter is now stripped of leading and
trailing slash before validation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 21 Jun 2006 10:56:41 +0000 (03:56 -0700)]
Merge branch 'ew/rebase' into next
* ew/rebase:
rebase: error out for NO_PYTHON if they use recursive merge
Add renaming-rebase test.
rebase: Allow merge strategies to be used when rebasing
object-refs: avoid division by zero
Andre Noll [Wed, 21 Jun 2006 02:46:05 +0000 (04:46 +0200)]
object-refs: avoid division by zero
Currently, we don't check refs_hash_size size and happily call
lookup_object_refs() even if refs_hash_size is zero which leads to
a division by zero in hash_obj().
Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 21 Jun 2006 09:50:59 +0000 (02:50 -0700)]
Merge branch 'jc/upload-corrupt' into next
* jc/upload-corrupt:
upload-pack/fetch-pack: support side-band communication
Retire git-clone-pack
upload-pack: prepare for sideband message support.
upload-pack: avoid sending an incomplete pack upon failure
Fix possible out-of-bounds array access
Junio C Hamano [Wed, 21 Jun 2006 07:30:21 +0000 (00:30 -0700)]
upload-pack/fetch-pack: support side-band communication
This implements a protocol extension between fetch-pack and
upload-pack to allow stderr stream from upload-pack (primarily
used for the progress bar display) to be passed back.
Junio C Hamano [Wed, 21 Jun 2006 06:54:26 +0000 (23:54 -0700)]
Retire git-clone-pack
The program is not used by git-clone since git-fetch-pack was extended
to allow its caller do what git-clone-pack alone did, and git-clone was
updated to use it.
Junio C Hamano [Wed, 21 Jun 2006 05:48:23 +0000 (22:48 -0700)]
upload-pack: prepare for sideband message support.
This does not implement sideband for propagating the status to
the downloader yet, but add code to capture the standard error
output from the pack-objects process in preparation for sending
it off to the client when the protocol extension allows us to do
so.
Junio C Hamano [Wed, 21 Jun 2006 01:26:34 +0000 (18:26 -0700)]
upload-pack: avoid sending an incomplete pack upon failure
When the repository on the remote side is corrupted, rev-list
spawned from upload-pack would die with error, but pack-objects
that reads from the rev-list happily created a packfile that can
be unpacked by the downloader. When this happens, the resulting
packfile is not corrupted and unpacks cleanly, but the list of
the objects contained in it is not what the protocol exchange
computed.
This update makes upload-pack to monitor its subprocesses, and
when either of them dies with error, sends an incomplete pack
data to the downloader to cause it to fail.
Jakub Narebski [Wed, 21 Jun 2006 07:48:02 +0000 (09:48 +0200)]
gitweb: whitespace cleanup
Do not use tabs to align variable initialization (actually use
tabs only at the beginning of line, for code indent). Remove trailing
whitespace. Make whitespace usage more consistent.
Signed-off-by: Jakub Narebski <jnareb.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Jun 2006 09:47:14 +0000 (02:47 -0700)]
checkout -f: do not leave untracked working tree files.
Earlier we did not consider untracked working tree files
"precious", but we have always considered them fair game to
clobber. These days, branch switching by read-tree is more
careful and tries to protect untracked working tree files. This
caused the following workflow to stop working:
Because the second checkout leaves F from the previous state as
untracked file in the working tree, the merge would fail, trying
to protect F from being clobbered.
This changes "git checkout -f" to remove working tree files that
are known to git in the switched-from state but do not exist in
the switched-to state, borrowing the same logic from "reset --hard".
David Woodhouse [Tue, 20 Jun 2006 14:38:13 +0000 (15:38 +0100)]
Log peer address when git-daemon called from inetd
When we run git-daemon from inetd, even with the --verbose option, it
doesn't log the peer address. That logic was only in the standalone
daemon code -- move it to the execute() function instead. Tested with
both IPv6 and Legacy IP clients, in both inetd and daemon mode.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Jon Loeliger <jdl@jdl.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Tue, 20 Jun 2006 14:58:12 +0000 (14:58 +0000)]
gitweb: style done with stylesheet
Replace (almost) all 'style' attributes with 'class' attribute
and adding rule to CSS file. Some tables use CSS for styling
instead of legacy styling attributes.
[jc: too many rejects -- hand fixed and reindented]
This bug was hidden by the "future-proofing" of the test. Sigh.
When neither GIT_CONFIG nor GIT_CONFIG_LOCAL is set, do not use NULL,
but $GIT_DIR/config. Instead of using $GIT_DIR/config when only
GIT_CONFIG_LOCAL is set. Sorry.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Tue, 20 Jun 2006 00:42:35 +0000 (17:42 -0700)]
Add "named object array" concept
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Jun 2006 01:25:21 +0000 (18:25 -0700)]
Restore SIGCHLD to SIG_DFL where we care about waitpid().
It was reported that under one implementation of socks client
"git clone" fails with "error: waitpid failed (No child processes)",
because "git" is spawned after setting SIGCHLD to SIG_IGN.
Arguably it may be a broken setting, but we should protect
ourselves so that we can get reliable results from waitpid() for
the children we care about.
This patch resets SIGCHLD to SIG_DFL in three places:
- connect.c::git_connect() - initiators of git native
protocol transfer are covered with this.
- daemon.c::main() - obviously.
- merge-index.c::main() - obviously.
There are other programs that do fork() but do not waitpid():
http-push, imap-send. upload-pack does not either, but in the
case of that program, each of the forked halves runs exec()
another program, so this change would not have much effect
there.
Junio C Hamano [Tue, 20 Jun 2006 00:01:35 +0000 (17:01 -0700)]
xdiff: minor changes to match libxdiff-0.21
This reformats the change 621c53cc082299eaf69e9f2dc0274547c7d87fb0
introduced to match what upstream author implemented in libxdiff-0.21
without changing any logic (hopefully ;-). This is to help keep
us in sync with the upstream.
Linus Torvalds [Mon, 19 Jun 2006 17:44:15 +0000 (10:44 -0700)]
Add specialized object allocator
This creates a simple specialized object allocator for basic
objects.
This avoids wasting space with malloc overhead (metadata and
extra alignment), since the specialized allocator knows the
alignment, and that objects, once allocated, are never freed.
It also allows us to track some basic statistics about object
allocations. For example, for the mozilla import, it shows
object usage as follows:
and the simpler allocator shaves off about 2.5% off the memory
footprint off a "git-rev-list --all --objects", and is a bit
faster too.
[ Side note: this concludes the series of "save memory in object storage".
The thing is, there simply isn't much more to be saved on the objects.
Doing "git-rev-list --all --objects" on the mozilla archive has a final
total RSS of 131498 pages for me: that's about 513MB. Of that, the
object overhead is now just 56MB, the rest is going somewhere else (put
another way: the fact that this patch shaves off 2.5% of the total
memory overhead, considering that objects are now not much more than 10%
of the total shows how big the wasted space really was: this makes
object allocations much more memory- and time-efficient).
I haven't looked at where the rest is, but I suspect the bulk of it is
just the pack-file loading. It may be that we should pack the tree
objects separately from the blob objects: for git-rev-list --objects, we
don't actually ever need to even look at the blobs, but since trees and
blobs are interspersed in the pack-file, we end up not being dense in
the tree accesses, so we end up looking at more pages than we strictly
need to.
So with a 535MB pack-file, it's entirely possible - even likely - that
most of the remaining RSS is just the mmap of the pack-file itself. We
don't need to map in _all_ of it, but we do end up mapping a fair
amount. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix setting config variables with an alternative GIT_CONFIG
When setting a config variable, git_config_set() ignored the variables
GIT_CONFIG and GIT_CONFIG_LOCAL. Now, when GIT_CONFIG_LOCAL is set, it
will write to that file. If not, GIT_CONFIG is checked, and only as a
fallback, the change is written to $GIT_DIR/config.
Add a test for it, and also future-proof the test for the upcoming
$HOME/.gitconfig support.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 19 Jun 2006 18:27:59 +0000 (20:27 +0200)]
Make CSS file gitweb/gitweb.css more readable
Taken from git://git.xmms.se/xmms2/gitweb-xmms2.git
commit 561262030d58a6325f500b36d836dbe02a5abc68
"Make CSS readable" by Daniel Svensson, with extra
parts removed and consistent whitespace usage.
[jc: tabified the results to cleaning things up, and removed an
added item that was commented out. ]
Junio C Hamano [Mon, 19 Jun 2006 04:50:19 +0000 (21:50 -0700)]
Merge branch 'jn/web' into next
* jn/web:
Fix gitweb stylesheet
Support for the standard mime.types map in gitweb
gitweb: text files for 'blob_plain' action without charset by default
gitweb: safely output binary files for 'blob_plain' action
Move gitweb style to gitweb.css
Junio C Hamano [Mon, 19 Jun 2006 04:48:32 +0000 (21:48 -0700)]
Merge branch 'pb/config' into next
* pb/config:
Support for extracting configuration from different files
Fix PPC SHA1 routine for large input buffers
Make t8001-annotate and t8002-blame more portable
Remove "refs" field from "struct object"
Make release tarballs friendlier to older tar versions
projects / thirdparty / git.git / log
